Droplet Contents Research Articles

MiR-146a-5p, targeting ErbB4, promotes 3T3-L1 preadipocyte differentiation through the ERK1/2/PPAR-γ signaling pathway

BackgroundMicroRNAs (MiRNAs) are known to participate in preadipocyte differentiation, but the manner in which miR-146a-5p participates in this process remains unclear. This study was performed to examine the participation of miR-146a-5p in 3T3-L1 cell differentiation.Material and MethodsmiR-146a-5p expression was upregulated and down-regulated to examine effects on 3T3-L1 cell differentiation. Bioinformatics analysis was performed to predict its target genes, and the signaling pathway it regulates was identified by qRT-PCR and Western blotting. The expression of miR-146a-5p in epididymal adipose tissue from obese mice and in an obese mouse adipose cell model was examined by qRT-PCR.Results3T3-L1 cells differentiated into mature adipocytes successfully, as verified by increased areas of intracellular lipid droplets and elevated expression of mature adipocyte markers, and these cells had elevated miR-146a-5p expression. The intracellular lipid droplet and triglyceride contents and the expression of mature adipocyte markers were significantly increased in miR-146a-5p–overexpressing 3T3-L1 cells and markedly decreased in miR-146a-5p–inhibited 3T3-L1 cells. ErbB4 was a predicted target gene of miR-146a-5p. In miR-146a-5p–overexpressing 3T3-L1 cells, ErbB4 expression and ERK1/2 phosphorylation were decreased and the expression of PPAR-γ was increased; the opposite was observed in miR-146a-5p–inhibited 3T3-L1 cells. In addition, miR-146a-5p expression was significantly increased in the mouse epididymal adipose tissue and adipose cell model.ConclusionsUpregulated miR-146a-5p expression was related to 3T3-L1 cell differentiation. MiR-146a-5p promoted 3T3-L1 cell differentiation by targeting ErbB4 and via the ERK1/2/PPAR-γ signaling pathway.

Microfluidic Platform with Serpentine Geometry Providing Chaotic Mixing in Induction Time Experiments.

We present a droplet microfluidic platform mixing the contents of the droplet chaotically in microfluidic induction time measurements, a promising method for quantifying nucleation kinetics with minute amounts of solute. The nucleation kinetics of aqueous potassium chloride droplets dispersed in mineral oil without surfactants is quantified in the presence and absence of chaotic mixing. We demonstrate the ability of the proposed platform to dictate droplet size, to provide a homogeneous temperature distribution, and to chaotically mix the droplet contents. Chaotic mixing in induction time measurements is facilitated by the motion of droplets through serpentine micromixer bends, while the extent of mixing is controlled by how much droplets move. Different nucleation kinetics are observed in experiments where the droplets are static, mixed, and in motion. We hypothesize that the droplet motion induces formation of a thin-liquid Bretherton film surrounding the droplets. The thin film shields droplets from solid boundaries that are more efficient heteronucleant surfaces compared to liquid–liquid interfaces. We observed that repeated microfluidic induction time measurements, particularly with moving droplets, produce significantly distinct cumulative nucleation probability curves, indicating that the measured nucleation kinetics depend strongly on the details of the experimental procedure, which we discuss in detail. Finally, we compare the microfluidic experiments to well-mixed, milliliter volume, turbidity-based measurements in the context of classic nucleation theory.

Directional droplet transport on switchable ratchets by mechanowetting

Materials with a mechanical response to an external stimulus are promising for application in miniaturized cargo and fluid manipulation in microfluidic (lab-on-a-chip) systems and microsystems in general. One of the main challenges in droplet microfluidics is the precise control of the droplet motion, and existing technologies have drawbacks that can compromise the droplet contents. Here, we demonstrate how an on–off switchable ratchet topography combined with a simple actuation strategy can be exploited to accurately manipulate mm-sized droplets. Because of the mechanowetting principle, the three-phase line dynamically attaches to these deforming ratchets, affecting the droplet displacement in a controlled matter. We show that such topographies are capable of transporting droplets over a surface in a stepwise fashion. We calculate the forces generated by the surface using both a theoretical description of the three-phase line and fluid simulations, and we identify the window of applicability in terms of the droplet size relative to the sawtooth dimensions. Our results enable the design of microfluidic systems with deforming wall topographies for controlled droplet manipulation.

Experimental and Computational Analysis of Mixing Inside Droplets for Microfluidic Fabrication of Gold Nanoparticles

Emulsions formed by mixing reactant streams inside microdroplets are efficient microscale reactors for the synthesis of nano/microparticles/crystals due to small quantities of reagents confined within each droplet and the separation of droplet contents from the reactor walls. In this work, the synthesis of size-tunable gold nanoparticles (AuNPs) within emulsion droplets generated in a three-phase glass capillary microfluidic device was investigated experimentally and numerically using computational fluid dynamics (CFD). AuNPs were produced by micromixing two aqueous streams, 1.15 mM HAuCl4 containing the 1% poly(vinylpyrrolidone) capping agent and 20 mM ascorbic acid solutions, inside monodispersed droplets created by three-dimensional (3D) counter-current flow focusing in a medium-chain triglyceride. The mean particle size of AuNPs was tunable in the range between 26 and 56 nm and depended on the degree of premixing of the reactant streams shortly before droplet generation, and the mixing efficiency within droplets, which was controlled by hydrodynamic conditions within the microfluidic device. The CFD results were compared and validated against experimental observations and revealed the presence of a recirculation zone near the outer wall of the injection capillary tip. The mixing efficiency was higher at smaller droplet size causing a reduction in the particle size of the AuNPs.

Quantitative electrolysis of droplet contents in microfluidic channels. Concept and experimental validation

A cross-channel geometry was studied to perform quantitative electrolysis of circulating droplets without influence of the counter electrode reaction on the droplet content. In the microdevices, the counter electrode is located in a secondary microchannel to prevent any contact with the droplets during detection. The electrochemical performance was assessed both theoretically and experimentally based on the droplet properties and mass transport above the working electrode. The results showed that under optimal conditions, quantitative electrolysis of droplet contents can be achieved when the working electrode operates in thin-layer regime. These results pave the way for new strategies allowing the implementation of electrochemical detections in droplet microfluidics without the need to perform calibration or to determine both the size and velocity of droplets prior to detection.

Mogroside V Protects Porcine Oocytes From Lipopolysaccharide-Induced Meiotic Defects.

Accumulating evidence has demonstrated that lipopolysaccharide (LPS) compromises female reproduction, especially oocyte maturation and competence. However, methods to protect oocyte quality from LPS-induced deterioration remain largely unexplored. We previously found that mogroside V (MV) can promote oocyte maturation and embryonic development. However, whether MV can alleviate the adverse effects of LPS exposure on oocyte maturation is unclear. Thus, in this study, we used porcine oocytes as a model to explore the effects of MV administration on LPS-induced oocyte meiotic defects. Our findings show that supplementation with MV protected oocytes from the LPS-mediated reduction in the meiotic maturation rate and the subsequent blastocyst formation rate. In addition, MV alleviated the abnormalities in spindle formation and chromosome alignment, decrease in α-tubulin acetylation levels, the disruption of actin polymerization, and the reductions in mitochondrial contents and lipid droplet contents caused by LPS exposure. Meanwhile, LPS reduced m6A levels in oocytes, but MV restored these epigenetic modifications. Furthermore, MV reduced reactive oxygen species (ROS) levels and early apoptosis in oocytes exposed to LPS. In summary, our study demonstrates that MV can protect oocytes from LPS-induced meiotic defects in part by reducing oxidative stress and maintaining m6A levels.

Electrochemical assessments of droplet contents in microfluidic channels. Application to the titration of heterogeneous droplets

Series of aqueous droplets containing redox species were generated on-demand in a microfluidic channel and detected downstream by an electrochemical cell. Depending on the cell geometry, amperometric detections were performed to simultaneously determine the velocity, volume and content of circulating droplets in oil. Volumes and velocities were estimated from specific transition times on the chronoamperometric responses, while charge were evaluated from current integration. The results showed that the total charge within droplets was controlled by the geometry of the electrochemical cell and droplet velocity, leading to accurate determinations of droplet content under specific operating conditions. An active merging of droplets with titrating solutions was tested for analytical purposes. The results demonstrated that even if the mixing was not complete during detection, the assessment of droplet content was still valid. The performance of electrochemical detection was thus evidenced to determine the content of heterogeneous droplets. This property is pertinent since the design of sophisticated circuits is no longer required to fully homogenize the droplet content before characterization, opening broader perspectives in droplet-based microfluidics.

Programmable µChopper Device with On-Chip Droplet Mergers for Continuous Assay Calibration.

While droplet-based microfluidics is a powerful technique with transformative applications, most devices are passively operated and thus have limited real-time control over droplet contents. In this report, an automated droplet-based microfluidic device with pneumatic pumps and salt water electrodes was developed to generate and coalesce up to six aqueous-in-oil droplets (2.77 nL each). Custom control software combined six droplets drawn from any of four inlet reservoirs. Using our μChopper method for lock-in fluorescence detection, we first accomplished continuous linear calibration and quantified an unknown sample. Analyte-independent signal drifts and even an abrupt decrease in excitation light intensity were corrected in real-time. The system was then validated with homogeneous insulin immunoassays that showed a nonlinear response. On-chip droplet merging with antibody-oligonucleotide (Ab-oligo) probes, insulin standards, and buffer permitted the real-time calibration and correction of large signal drifts. Full calibrations (LODconc = 2 ng mL−1 = 300 pM; LODamt = 5 amol) required <1 min with merely 13.85 nL of Ab-oligo reagents, giving cost-savings 160-fold over the standard well-plate format while also automating the workflow. This proof-of-concept device—effectively a microfluidic digital-to-analog converter—is readily scalable to more droplets, and it is well-suited for the real-time automation of bioassays that call for expensive reagents.

Mstn knockdown decreases the trans-differentiation from myocytes to adipocytes by reducing Jmjd3 expression via the SMAD2/SMAD3 complex.

Myostatin (Mstn) is an important growth/differentiation factor, and knockdown of Mstn reduces fat content. Here, we knocked down Mstn expression in C2C12 myoblasts and then induced adipogenic trans-differentiation in the cells. The effects of Mstn knockdown on lipid droplet contents and H3K27me3 marker expression on adipocyte-specific genes were detected. The results showed that Mstn knockdown reduced the formation of lipid droplets, downregulated the expression of adipocyte-specific genes, and increased H3K27me3 marker expression on adipocyte-specific genes. Chromatin immunoprecipitation analysis showed that the SMAD2/SMAD3 complex could combine with the Jumonji D3 (Jmjd3) promoter and that Mstn regulated Jmjd3 expression through this process. Jmjd3 overexpression removed the H3K27me3 marker and increased the expression of adipocyte-specific genes. Overall, our results showed that Mstn regulated Jmjd3 expression through SMAD2/SMAD3, thus affecting the H3K27me3 marker on adipocyte-specific genes and the trans-differentiation from myocytes to adipocytes.

Continuous Droplet Coalescence in a Microchannel Coflow Using Bulk Acoustic Waves

Extraction of particles or cells encapsulated in aqueous droplets into a continuous aqueous stream is important for single-cell studies. Controlled passive coalescence of droplets under coflow conditions in a microchannel is extremely challenging, requiring active chemical, magnetic, or electrical techniques. Such methods have disadvantages, though, in terms of system integration or biocompatibility. The authors' sound-wave-mediated coalescence technique addresses the above limitations and promises rapid, on-demand extraction of a droplet's contents in a microfluidic device.

Acoustic droplet vaporization embedded in 3-D printed gelatin methacrylate hydrogels

Gelatin Methacrylate (GelMA) is a popular hydrogel used for tissue engineering applications due to its biocompatibility, tunable mechanical properties, and rapid reproducibility. With its ability to be crosslinked with ultraviolet light exposure, GelMA can be 3-D printed into a variety of different shapes and geometries for customization for patient needs. We embedded phase-shift perfluorocarbon nanodroplets within the GelMA resin prior to 3-D printing. The droplets were then vaporized by external acoustic excitations determining the acoustic droplet vaporization (ADV) and inertial cavitation (IC) thresholds of the embedded droplets. The ADV of embedded droplets in a tissue engineering scaffolds can be used for triggered release of droplet contents. Varying the size and liquid core composition of the droplets as well as the mechanical properties of GelMA, one can change the ADV and IC characteristics of the embedded droplets. We will present the results of our experiments and discuss their implications on the potential use of this technology in tissue engineering.

Besnoitia besnoiti infection alters both endogenous cholesterol de novo synthesis and exogenous LDL uptake in host endothelial cells

Besnoitia besnoiti, an apicomplexan parasite of cattle being considered as emergent in Europe, replicates fast in host endothelial cells during acute infection and is in considerable need for energy, lipids and other building blocks for offspring formation. Apicomplexa are generally considered as defective in cholesterol synthesis and have to scavenge cholesterol from their host cells for successful replication. Therefore, we here analysed the influence of B. besnoiti on host cellular endogenous cholesterol synthesis and on sterol uptake from exogenous sources. GC-MS-based profiling of cholesterol-related sterols revealed enhanced cholesterol synthesis rates in B. besnoiti-infected cells. Accordingly, lovastatin and zaragozic acid treatments diminished tachyzoite production. Moreover, increased lipid droplet contents and enhanced cholesterol esterification was detected and inhibition of the latter significantly blocked parasite proliferation. Furthermore, artificial increase of host cellular lipid droplet disposability boosted parasite proliferation. Interestingly, lectin-like oxidized low density lipoprotein receptor 1 expression was upregulated in infected endothelial hostcells, whilst low density lipoproteins (LDL) receptor was not affected by parasite infection. However, exogenous supplementations with non-modified and acetylated LDL both boosted B. besnoiti proliferation. Overall, current data show that B. besnoiti simultaneously exploits both, endogenous cholesterol biosynthesis and cholesterol uptake from exogenous sources, during asexual replication.

Characterization of Chemically and Thermally Treated Oil-in-Water Heteroaggregates and Comparison to Conventional Emulsions.

Heteroaggregated oil-in-water (O/W) emulsions formed by targeted combination of oppositely charged emulsion droplets were proposed to be used for the modulation of physical properties of food systems, ideally achieving the formation of a particulate 3-dimensional network at comparably low-fat content. In this study, rheological properties of Quillaja saponins (QS), sugar beet pectin (SBP), and whey protein isolate (WPI) stabilized conventional and heteroaggregated O/W emulsions at oil contents of 10% to 60% (w/w) were investigated. Selected systems having an oil content of 30% (w/w) and different particle sizes (d43 ≤ 1.1 or ≥16.7 μm) were additionally subjected to chemical (genipin or glutaraldehyde) and thermal treatments, aiming to increase network stability. Subsequently, their rheological properties and stability were assessed. Yield stresses (τ0 ) of both conventional and heteroaggregated O/W emulsions were found to depend on emulsifier type, oil content, and initial droplet size. For conventional emulsions, high yield stresses were only observed for SBP-based emulsions (τ0 ,SBP approximately 157 Pa). Highest yield stresses of heteroaggregates were observed when using small droplets stabilized by SBP/WPI (approximately 15.4 Pa), being higher than those of QS/WPI (approximately 1.6 Pa). Subsequent treatments led to significant alterations in rheological properties for SBP/WPI systems, with yield stresses increasing 29-fold (glutaraldehyde) and 2-fold (thermal treatment) compared to untreated heteroaggregates, thereby surpassing yield stresses of similarly treated conventional SBP emulsions. Genipin-driven treatments proved to be ineffective. Results should be of interest to food manufacturers wishing to design viscoelastic food emulsion based systems at lower oil droplet contents.

지방세포의 분화에 미치는 Acacia catechu 추출물의 항비만 효과

The purpose of this study was to investigate the effects of catechu water extract on adipogenesis in 3T3-L1 adipocytes. 3T3-L1 preadipocytes were differentiated with adipogenic regents by incubation for 9 days in the absence or presence of catechu extract ranging from 1∼200 μg/mL. The effect of catechu extracts on cell proliferation of 3T3-L1 preadipocytes was investigated using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The effect of catechu extracts on 3T3-L1 differentiation was examined by measuring intracellular lipid droplet and triglyceride contents. These results were obtained from preadipocyte proliferation and adipocyte differentiation of 3T3-L1. Catechu extracts inhibited lipid accumulation and remarkably decreased triglyceride contents in 3T3-L1 preadipocytes at a concentration showing no cytotoxicity. The anti-adipogenic effects of catechu appeared to be mediated by significant down-regulation of expression of peroxisome proliferator-activated receptor γ, CCAAT/enhancer-binding protein α, and sterol regulatory element-binding protein 1c proteins apart from expression of hormone-sensitive lipase. We suggest that catechu extracts significantly inhibit adipogenesis and can be used for regulation of obesity.

Cis and Trans Cooperativity of E-Cadherin Mediates Adhesion in Biomimetic Lipid Droplets

The regulation of cell-cell adhesion is important in cell motility, tissue growth, and for the mechanical integrity of tissues. Although the role of active cytoskeleton dynamics in regulating cadherin interactions is crucial in vivo, here we present a biomimetic emulsion system to characterize the passive E-cadherin-mediated adhesion between droplets. The visualization of a three-dimensional assembly of lipid droplets, functionalized with extracellular E-cadherin domains, reveals a hierarchy of homophilic interactions. First, the high interfacial tension of droplets facilitates trans cadherin-cadherin adhesion, which is strong enough to stabilize looser than random close packing configurations. Second, fluorescence enhancement shows that adding clustering agents, such as calcium or chelating ligands, favor the lateral cis adhesion of the already bound cadherin pairs over the clustering of monomer cadherin on the surface. Finally, above a threshold cadherin and calcium concentration, the cis and trans protein interactions become strong enough to trigger and promote droplet fusion. While E-cadherin is not known to participate in cellular fusion, this mechanism is general because replacing calcium with cholesterol to cluster the cadherin-carrying lipids also promotes fusion. These results suggest that passive clustering, via calcium-induced dimerization or membrane ordering, may contribute to the reinforcement of cell-cell contacts. Alternatively, a molecular switch for fusion offers a route to mixing droplet contents and controlling their size in situ.

Eimeria bovis infection modulates endothelial host cell cholesterol metabolism for successful replication.

During first merogony Eimeria bovis forms large macromeronts in endothelial host cells containing >120 000 merozoites I. During multiplication, large amounts of cholesterol are indispensable for the enormous offspring membrane production. Cholesterol auxotrophy was proven for other apicomplexan parasites. Consequently they scavenge cholesterol from their host cell apparently in a parasite-specific manner. We here analyzed the influence of E. bovis infection on endothelial host cell cholesterol metabolism and found considerable differences to other coccidian parasites. Overall, free cholesterol significantly accumulated in E. bovis infected host cells. Furthermore, a striking increase of lipid droplet formation was observed within immature macromeronts. Artificial host cell lipid droplet enrichment significantly improved E. bovis merozoite I production confirming the key role of lipid droplet contents for optimal parasite proliferation. The transcription of several genes being involved in both, cholesterol de novo biosynthesis and low density lipoprotein-(LDL) mediated uptake, was significantly up-regulated at a time in infected cells suggesting a simultaneous exploitation of these two cholesterol acquisition pathways. E. bovis scavenges LDL-derived cholesterol apparently through significantly increased levels of surface LDL receptor abundance and LDL binding to infected cells. Consequently, LDL supplementation significantly improved parasite replication. The up-regulation of the oxidized LDL receptor 1 furthermore identified this scavenger receptor as a key molecule in parasite-triggered LDL uptake. Moreover, cellular cholesterol processing was altered in infected cells as indicated by up-regulation of cholesterol-25-hydroxylase and sterol O-acyltransferase. Overall, these results show that E. bovis considerably exploits the host cell cholesterol metabolism to guarantee its massive intracellular growth and replication.Electronic supplementary materialThe online version of this article (doi:10.1186/s13567-015-0230-z) contains supplementary material, which is available to authorized users.

Fluorinated Pickering Emulsions with Nonadsorbing Interfaces for Droplet-based Enzymatic Assays.

This work describes the use of fluorinated Pickering emulsions with nonadsorbing interfaces in droplet-based enzymatic assays. State-of-the-art droplet assays have relied on one type of surfactants consisting of perfluorinated polyether and polyethylene glycol (PFPE-PEG). These surfactants are known to have limitations including the tedious synthesis and interdrop molecular transport which leads to the cross-contamination of droplet contents. Previously we have shown that replacing surfactants with nanoparticles as droplet stabilizers mitigate interdrop transport of small molecules. The nonspecific adsorption of enzymes on nanoparticle surface, however, could cause structural changes in enzymes and consequently the loss of enzymatic activity. To overcome such challenge, we render nanoparticle surface nonadsorbing to enzymes by in situ adsorption of polyethylene glycol (PEG) on particle surfaces. We show that enzyme activities are preserved in droplets stabilized by PEG-adsorbed nanoparticles, and are comparable with those in drops stabilized by PFPE-PEG surfactants. In addition, our nonadsorbing Pickering emulsions successfully prevent interdrop molecular transport, thereby maintaining the accuracy of droplet assays. The particles are also simple and economical to synthesize. The PEG-adsorbed nanoparticles described in this work are thus a competitive alternative to the current surfactant system, and can potentially enable new droplet-based biochemical assays.

Taking advantage of reduced droplet-surface interaction to optimize transport of bioanalytes in digital microfluidics.

Digital microfluidics (DMF), a technique for manipulation of droplets, is a promising alternative for the development of "lab-on-a-chip" platforms. Often, droplet motion relies on the wetting of a surface, directly associated with the application of an electric field; surface interactions, however, make motion dependent on droplet contents, limiting the breadth of applications of the technique. Some alternatives have been presented to minimize this dependence. However, they rely on the addition of extra chemical species to the droplet or its surroundings, which could potentially interact with droplet moieties. Addressing this challenge, our group recently developed Field-DW devices to allow the transport of cells and proteins in DMF, without extra additives. Here, the protocol for device fabrication and operation is provided, including the electronic interface for motion control. We also continue the studies with the devices, showing that multicellular, relatively large, model organisms can also be transported, arguably unaffected by the electric fields required for device operation.

Fluorinated pickering emulsions impede interfacial transport and form rigid interface for the growth of anchorage-dependent cells.

This study describes the design and synthesis of amphiphilic silica nanoparticles for the stabilization of aqueous drops in fluorinated oils for applications in droplet microfluidics. The success of droplet microfluidics has thus far relied on one type of surfactant for the stabilization of drops. However, surfactants are known to have two key limitations: (1) interdrop molecular transport leads to cross-contamination of droplet contents, and (2) the incompatibility with the growth of adherent mammalian cells as the liquid-liquid interface is too soft for cell adhesion. The use of nanoparticles as emulsifiers overcomes these two limitations. Particles are effective in mitigating undesirable interdrop molecular transport as they are irreversibly adsorbed to the liquid-liquid interface. They do not form micelles as surfactants do, and thus, a major pathway for interdrop transport is eliminated. In addition, particles at the droplet interface provide a rigid solid-like interface to which cells could adhere and spread, and are thus compatible with the proliferation of adherent mammalian cells such as fibroblasts and breast cancer cells. The particles described in this work can enable new applications for high-fidelity assays and for the culture of anchorage-dependent cells in droplet microfluidics, and they have the potential to become a competitive alternative to current surfactant systems for the stabilization of drops critical for the success of the technology.

Effects of Additives upon Percolation Temperature in AOT-Based Microemulsions

In the present review the percolative phenomena has been analyzed. Percolation is related to transport phenomena in microemulsions, in particular the electric charge transport. The influence of different additives upon electric percolation has been commented. The effects of the additives considered upon the microemulsion properties appear to come about through their association with the surfactant interface. The effects of these agents on the ease with which interdroplet channels allowing transfer of droplet contents are formed are not only responsible for their effects on percolation temperature, but also have serious implications for the rates of fast chemical reactions performed in microemulsions.