Polymer Donor Research Articles

Role of Second Polymer Donor in Polymer–Fullerene Ternary Blend Solar Cells Evaluated by Photoconductive Atomic Force Microscopy

Role of Second Polymer Donor in Polymer–Fullerene Ternary Blend Solar Cells Evaluated by Photoconductive Atomic Force Microscopy

Photo-crosslinking and layer-by-layer processed organic photodetectors with remarkably suppressed dark current

The effective reduction of dark (or noise) current presents a significant hurdle in enhancing the detectivity of organic photodetectors (OPDs). To address this challenge, a photo-crosslinkable donor polymer, PM6-Br50, is synthesized by introducing bromoalkyl side-chains onto the PM6 structure. This modification enables the formation of a pseudo planar heterojunction (p-PHJ) structure of crosslinked donor/acceptor through a layer-by-layer (LbL) sequential process without the necessity for an semi-orthogonal solvent. This innovation effectively overcomes solvent-related limitations in the LbL process. Additionally, we replace the semi-metallic hole-transport layer (HTL), PEDOT:PSS, with a semiconducting conjugated polyelectrolyte (TPAFS-TMA) with a high conduction band. The p-PHJ configuration, featuring pure donor/anode and pure acceptor/cathode contacts, enhances the charge injection barrier for electrons (holes) from the anode (cathode) in the dark under reverse bias, effectively minimizing dark current. Furthermore, the TPAFS-TMA HTL serves to impede electron injection from the anode. Through the synergistic combination of these two strategies, a significantly reduced dark current density (4.03 × 10−10 A cm−2) is measured by four orders of magnitude, compared to the bulk heterojunction OPDs with PEDOT:PSS. Furthermore, we measure remarkably high shot noise-based and total noise current-based specific detectivities of 4.27 × 1013 and 6.97 × 1012 cm Hz1/2 W−1 (with linear dynamic range of 73.7 dB), respectively.

Design of non-fused ring electron acceptors with “embracing-type” side chains for organic solar cells

Backbone planarity is an inherent structural feature for fused ring electron acceptors and one of important prerequisites for their high photovoltaic performance. However, for non-fused ring electron acceptors (NFREAs), it is a challenging task to achieve it. In this work, two NFREAs (Ph2TIC and BT2TIC) containing thiophene-benzene-thiophene or thiophene-benzothiadiazole-thiophene three non-fused aromatic rings in central scaffold were designed with an attempt to use a pair of 2,4,6-triisopropylphenyl substituents (referred as “embracing”-type side chains) at 3,3′-positions of the two thiophene units to lock the backbone in a planar conformation. X-ray crystallography revealed that Ph2TIC has a quasi-planar backbone, whereas BT2TIC shows a twisted one, but both tend to form two-dimensional layered arrays through intermolecular π-π stacking involving terminal acceptor moieties. UV–vis light-absorption spectroscopy showed that both compounds have similar optoelectronic properties either in dilute solutions or in solid film state, thus confirming the conformation-lock function of the “embracing”-type side chains. While for photophysical properties, BT2TIC displays a red-shifted broader light absorption spectrum as compared to Ph2TIC due to the introduction of an additional acceptor moiety in the structure. Ph2TIC and BT2TIC were evaluated as the acceptor materials in organic solar cells in combination with PM6, a typical donor polymer, and delivered the optimized power conversion efficiencies of 4.31 % and 3.78 %, respectively. Although the photovoltaic performances are modest, the work provides a new thought for maintaining the backbone planarity in NFREAs and would be useful in their future design.

A 3,3'-Difluoro-2,2'-Bithiophene Based Donor Polymer Realizing High Efficiency (>17%) Single Junction Binary Organic Solar Cells.

In this study, two novel donor-acceptor (D-A) copolymers are designed and synthesized, DTBT-2T and DTBT-2T2F with 2,2'-bithiophene or 3,3'-difluoro-2,2'-bithiophene as the donor unit and dithienobenzothiadiazole as the acceptor unit, and used them as donor materials in non-fullerene organic solar cells (OSCs). Due to enhanced planarity of polymer chains resulted by the intramolecular F···S noncovalent interactions, the incorporation of 3,3'-difluoro-2,2'-bithiophene unit instead of 2,2'-bithiophene into the polymers can enhance their molecular packing, crystallinity and hole mobility. The DTBT-2T:L8-BO based binary OSCs deliver a power conversion efficiency (PCE) of only 9.71% with a Voc of 0.78V, a Jsc of 20.69mAcm-2 , and an FF of 59.67%. Moreover, the introduction of fluoro atoms can lower the highest occupied molecular orbital levels. As a result, DTBT-2T2F:L8-BO based single-junction binary OSCs exhibited less recombination loss, more balanced charge mobility, and more favorable morphology, resulting in an impressive PCE of 17.03% with a higher Voc of 0.89V, a Jsc of 25.40mAcm-2, and an FF of 75.74%. These results indicate that 3,3'-difluoro-2,2'-bithiophene unit can be used as an effective building block to synthesize high performance polymer donor materials. This work greatly expands the selection range of donor units for constructing high-performance polymers.

Layer‐by‐Layer Organic Solar Cells Enabled by 1,3,4‐Selenadiazole‐Containing Crystalline Small Molecule with Double‐Fibril Network Morphology

AbstractA double‐fibril network of the photoactive layer morphology is recognized as an ideal structure facilitating exciton diffusion and charge carrier transport for high‐performance organic solar cells (OSCs). However, in the layer‐by‐layer processed OSCs (LbL‐OSCs), polymer donors and small molecule acceptors (SMAs) are separately deposited, and it is challenging to realize a fibril network of pure SMAs with the absence of tight interchain entanglement as polymers. In this work, crystalline small molecule donors (SMDs), named TDZ‐3TR and SeDZ‐3TR, were designed and introduced into the L8‐BO acceptor solution, forcing the phase separation and molecular fibrilization. SeDZ‐3TR showed higher crystallinity and lower miscibility with L8‐BO acceptor than TDZ‐3TR, enabling more driving force to favor the phase separation and better molecular fibrilization of L8‐BO. On the other hand, two donor polymers of PM6 and D18 with different fibril widths and lengths were put together to optimize the fibril network of the donor layer. The simultaneously optimization of the acceptor and donor layers resulted in a more ideal double‐fibril network of the photoactive layer and an impressive power conversion efficiency (PCE) of 19.38 % in LbL‐OSCs.

Layer-by-Layer Organic Solar Cells Enabled by 1,3,4-Selenadiazole-Containing Crystalline Small Molecule with Double-Fibril Network Morphology.

A double-fibril network of the photoactive layer morphology is recognized as an ideal structure facilitating exciton diffusion and charge carrier transport for high-performance organic solar cells (OSCs). However, in the layer-by-layer processed OSCs (LbL-OSCs), polymer donors and small molecule acceptors (SMAs) are separately deposited, and it is challenging to realize a fibril network of pure SMAs with the absence of tight interchain entanglement as polymers. In this work, crystalline small molecule donors (SMDs), named TDZ-3TR and SeDZ-3TR, were designed and introduced into the L8-BO acceptor solution, forcing the phase separation and molecular fibrilization. SeDZ-3TR showed higher crystallinity and lower miscibility with L8-BO acceptor than TDZ-3TR, enabling more driving force to favor the phase separation and better molecular fibrilization of L8-BO. On the other hand, two donor polymers of PM6 and D18 with different fibril widths and lengths were put together to optimize the fibril network of the donor layer. The simultaneously optimization of the acceptor and donor layers resulted in a more ideal double-fibril network of the photoactive layer and an impressive power conversion efficiency (PCE) of 19.38 % in LbL-OSCs.

Tuning photovoltaic parameters in polymer solar cells through side-chain modification of donor polymer based on cyclopenta[c]thiophene-4,6(5H)-dione

Conjugated polymers were developed by using thiophene-dione derivatives named DEHOB-BDTF and DBOOB-BDTF. The polymers have a combination of electron donor (D) and electron acceptor (A), in which 5-(3,4-bis(((2-ethylhexyl)oxy)benzylidene)-1,3-dibromo-4H-cyclopenta[c]thiophene-4,6(5H)-dione (DEHOB) or 5-(3,4-bis((2-butyloctyl)oxy)benzylidene)-1,3-dibromo-4H-cyclopenta[c]thiophene-4,6(5H)-dione (DBOOB) serves as the electron acceptor units. The alkoxy chain shows strong electron-donating properties due to conjugation effects while longer alkoxy chain increases the solubility. Non-fullerene PSCs are fabricated with an ITO/ZnO/polymer: Y6BO/MoO3/Ag structure in which Y6BO is used as an electron acceptor. The performance of the device by using DEHOB-BDTF is accomplished up to 8.49 % (an open-circuit voltage of 0.85 V and a short-circuit current density of 20.1 mA/cm2). Furthermore, the longer alkoxy chain length enhances solubility making a well-ordering in DBOOB and reaching the fill factor of 54.2 %, due to the extended alkoxy chain can improve the miscibility in the blend.

Wide bandgap polymer donors with an acceptor1-π-acceptor2-π configuration for efficient polymer solar cells

To maximize the photovoltaic performance of polymer solar cells (PSCs), polymer donors and nonfullerene acceptors (NFAs) should be designed with complementarily optical and electronic properties as well as desirable morphological features. Currently, high-performance polymer donors are mainly constructed by alternating copolymerization of electron-rich (D) and electron-deficient (A) units. Here, we demonstrate that acceptor1-π-acceptor2-π (A1-π-A2-π)-type polymer donors constructed by copolymerization of two different A units can achieve comparable photovoltaic properties with those of D-π-A-π-type counterparts. By using the ladder-type 4,10-bis(2-hexyldecyl)-thieno[2ˊ,3ˊ:5,6]pyrido[3,4-g]thieno-[3,2-c]isoquinoline-5,11-dione as A1 unit, difluorobenzotriazole or benzodithiophene-4,8-dione as A2 unit, and thiophene unit as the π bridge, two A1-π-A2-π-type copolymers, P03 and P07, are successfully synthesized. Due to the weakened intramolecular charge-transfer effect, P03 and P07 exhibit wide bandgaps of 1.88 and 1.74 eV, respectively. In combination with the NFA of L8-BO, the P03:L8-BO-based blend shows superior crystallinity and uniform phase-separated morphology thereby leading to a higher power conversion efficiency (PCE) of 15.03 % in comparison with the P07:L8-BO-based blend which shows a PCE of 9.84 %. Notably, the 15.03 % efficiency is by far the highest value for PSCs based on A1-π-A2-π-type polymer donors. These results provide useful guidance for the future design of high-performance donor copolymers for PSCs.

Dithienoquinoxalineimide‐Based Polymer Donor Enables All‐Polymer Solar Cells Over 19 % Efficiency

AbstractAll‐polymer solar cells (all‐PSCs) have been regarded as one of the most promising candidates for commercial applications owing to their outstanding advantages such as mechanical flexibility, light weight and stable film morphology. However, compared to large amount of new‐emerging excellent polymer acceptors, the development of high‐performance polymer donor lags behind. Herein, a new D‐π‐A type polymer donor, namely QQ1, was developed based on dithienoquinoxalineimide (DTQI) as the A unit, benzodithiophene with thiophene‐conjugated side chains (BDTT) as the D unit, and alkyl‐thiophene as the π‐bridge, respectively. QQ1 not only possesses a strong dipole moment, but also shows a wide band gap of 1.80 eV and a deep HOMO energy level of −5.47 eV, even without halogen substituents that are commonly indispensable for high‐performance polymer donors. When blended with a classic polymer acceptor PY‐IT, the QQ1‐based all‐PSC delivers an outstanding PCE of 18.81 %. After the introduction of F‐BTA3 as the third component, a record PCE of 19.20 % was obtained, the highest value reported so far for all‐PSCs. The impressive photovoltaic performance originates from broad absorption range, reduced energy loss, and compact π–π stacking. These results provide new insight in the rational design of novel nonhalogenated polymer donors for further development of all‐PSCs.

Dithienoquinoxalineimide-Based Polymer Donor Enables All-Polymer Solar Cells Over 19 % Efficiency.

All-polymer solar cells (all-PSCs) have been regarded as one of the most promising candidates for commercial applications owing to their outstanding advantages such as mechanical flexibility, light weight and stable film morphology. However, compared to large amount of new-emerging excellent polymer acceptors, the development of high-performance polymer donor lags behind. Herein, a new D-π-A type polymer donor, namely QQ1, was developed based on dithienoquinoxalineimide (DTQI) as the A unit, benzodithiophene with thiophene-conjugated side chains (BDTT) as the D unit, and alkyl-thiophene as the π-bridge, respectively. QQ1 not only possesses a strong dipole moment, but also shows a wide band gap of 1.80 eV and a deep HOMO energy level of -5.47 eV, even without halogen substituents that are commonly indispensable for high-performance polymer donors. When blended with a classic polymer acceptor PY-IT, the QQ1-based all-PSC delivers an outstanding PCE of 18.81 %. After the introduction of F-BTA3 as the third component, a record PCE of 19.20 % was obtained, the highest value reported so far for all-PSCs. The impressive photovoltaic performance originates from broad absorption range, reduced energy loss, and compact π-π stacking. These results provide new insight in the rational design of novel nonhalogenated polymer donors for further development of all-PSCs.

Chalcogen Atoms Regulate the Organic Solar Cell Performance of B-N-Based Polymer Donors.

Donor polymers play a key role in the development of organic solar cells (OSCs). B-N-based polymer donors, as new types of materials, have attracted a lot of attention due to their special characteristics, such as high E(T1), small ΔEST, and easy synthesis, and they can be processed with real green solvents. However, the relationship between the chemical structure and device performance has not been systematically studied. Herein, chalcogen atoms that regulate the OSCs performance of B-N-based polymer donors were systematically studied. Fortunately, the substitution of a halogen atom did not affect the high E(T1) and small ΔEST character of the B-N-based polymer. The absorption and energy levels of the polymer were systematically regulated by O, S, and Se atom substitution. The PBNT-TAZ:Y6-BO-based OSCs device demonstrated a high power conversion efficiency of 15.36%. Moreover, the layer-by-layer method was applied to further optimize the device performance, and the PBNT-TAZ/Y6-BO-based OSCs device yielded a PCE of 16.34%. Consequently, we have systematically demonstrated how chalcogen atoms modulated the electronic properties of B-N-based polymers. Detailed and systematic structure-performance relationships are important for the development of next-generation B-N-based materials.

Polymerized-Small-Molecule Acceptors Featuring Siloxane-Terminated Side Chains for Mechanically Robust All-Polymer Solar Cells.

Flexible and stretchable organic solar cells (OSCs) show great promise in wearable and stretchable electronic applications. However, current high-performance OSCs consisting of polymer donors (PDs) and small-molecule acceptors (SMAs) face significant challenges in achieving both high power conversion efficiency (PCE) and excellent stretch-ability. In this study, we synthesized a new polymerized-small-molecule acceptor (P-SMA) PY-SiO featuring siloxane-terminated side chains and compared its photovoltaic and mechanical performance to that of the reference PY-EH with ethylhexyl-terminated side chains. We found that the incorporation of siloxane-terminated side chains in PY-SiO enhanced the molecular aggregation and charge transport, leading to an optimized film morphology. The resultant of all-polymer solar cells (all-PSCs) based on PBDB-T/PY-SiO showed a higher PCE of 12.04% than the PY-EH-based one (10.85%). Furthermore, the siloxane-terminated side chains also increased the interchain distance and provided a larger free volume for chain rotation and reconfiguration, resulting in a higher film crack-onset strain (COS: 18.32% for PBDB-T/PY-SiO vs 11.15% for PBDB-T/PY-EH). Additionally, the PY-SiO-based stretchable all-PSCs exhibited an impressive PCE of 9.8% and retained >70% of its original PCE even under a substantial 20% strain, exceeding the performance of the PY-EH-based stretchable all-PSCs. Our result suggests the great potential of the siloxane-terminated side chain for achieving high-performance and stretchable OSCs.

Design Principles of Diketopyrrolopyrrole‐Thienopyrrolodione Acceptor1–Acceptor2 Copolymers

AbstractThe design principles of acceptor1–acceptor2 copolymers featuring alternating diketopyrrolopyrrole (DPP) and thienopyrrolodione (TPD) moieties are investigated. The investigated series of polymers is obtained by varying the aromatic linker between the two acceptor motifs between thiophene, thiazole, pyridine, and benzene. High electron affinities between 3.96 and 4.42 eV, facilitated by the synergy of the acceptor motifs are determined with optical gaps between 1.37 and 2.02 eV. Grazing incidence wide‐angle X‐ray scattering studies reveal a range of film morphologies after thermal annealing, including face‐on, end‐on and superstructure edge‐on‐like crystallites. Conversely, all materials form thin edge‐on layers on the polymer–air interface, as demonstrated by multi‐elemental near‐edge X‐ray absorption fine‐structure spectroscopy. The benefit of the electron‐deficient linkers thiazole and pyridine is evident: In organic field effect transistors, electron mobilities of up to 4.6 × 10−2 cm2 V−1 s−1 are obtained with outstanding on/off current ratios of 5 × 105, facilitated by the absence of detectable hole transport in these materials. Viability for all‐polymer solar cells is assessed in active layer blends with the donor polymer PM6, yielding a maximum average power conversion efficiency of 4.8% and an open circuit voltage above 1 V.

Wide-bandgap donor polymers from organic photovoltaics as dopant-free hole transport layers for perovskite solar cells

Dopant-free polymer hole transport materials (HTMs) exhibit high thermal stability, hydrophobicity and film-processing capabilities, demonstrating excellent device efficiency and stability in perovskite solar cells (PSCs). Continued innovation of wide-bandgap polymers in organic photovoltaics (OPV) provides a valuable toolbox for developing polymeric HTMs. Here, we propose an effective molecule design for selecting structurally relevant polymers (D18, D18-Cl, PBQx-TCl) available for commercialization. We discover that the highly planar conjugated backbones play a crucial role in regulating the packing orientation of the film relative to the perovskite. The moderate aggregation with face-on packing orientation is conducive to the high-quality film, which is responsible for better contact with perovskite and superior charge extraction and transport. Simultaneously, these polymers with robust passivation enhanced the open circuit voltage (VOC) without additional passivation layers, streamlining the device process. Consequently, a PSC using dopant-free PBQx-TCl HTL demonstrated an efficiency of 24.12 % with a high VOC of 1.20 V and good operational stability (T90 > 600 h). This work reveals transparent structure–function-performance relationships between molecules and devices, paving the way for the subsequent development of high-performance HTMs.

19% efficiency in organic solar cells of Benzo[1,2-b:4,5-b′]Difuran-based donor polymer realized by volatile + non-volatile dual-solid-additive strategy

Though the application-promising photovoltaic technology named organic solar cells (OSCs) have been close to 20% benchmark power conversion efficiency (PCE) within fabrication friendly single-junction devices, these achievements are enabled by polymer donors based on benzodithiophene cores, requiring toxic production steps. Whilst, the bio-renewable benzo[1,2-b:4,5-b′]difuran unit constructed polymer donors cannot yield comparable efficiency, though their lower steric hindrance is widely appreciated. OSC field has paid great attention on optimizing their performance by chemistry design, yet the device engineering is relatively neglected compared to what have been done on the benzodithiophene side. Here we report a new dual additive strategy of simultaneously applying volatile (2-CN) and non-volatile (MF) solid additives to reduce non-radiative voltage loss and boost charge generation, via an occupying evaporated left vacancies in polymer matrix process. Consequently, the target system D18-Fu:L8-BO’s efficiency is promoted to 19.11%, representing the cutting-edge level of this research topic.

Recent Advances of Imide‐Functionalized Polymer Donors for Non‐fullerene Solar Cells†

Comprehensive SummaryIn recent years, there has been a shift towards using non‐fullerene electron acceptors in organic solar cells (OSCs) as a replacement for fullerene derivatives. This change requires polymer donors that possess compatible physical properties, such as absorption range, HOMO energy level, miscibility, and crystallinity. Moreover, the high cost and poor batch‐to‐batch reproducibility of polymer donors also hinder future large‐scale manufacturing. These emphasize the need to explore alternative types of polymer donors. The imide‐functionalized building units possess several key attributes that make their polymers highly promising for non‐fullerene OSCs. These attributes include ease of synthesis, strong electron‐withdrawing ability, rigid and co‐planar structure, and the ability to easily tune solubility through imide side chains. In this review, we summarized the synthetic routes of imide building units, and the structural evolution of imide‐functionalized polymer donors by focusing on the effects of polymer structure on their physical, optoelectronic, and photovoltaic properties. We hope that this mini‐review will serve as a catalyst for future research on imide‐functionalized polymers toward high‐performance, cost‐effective, and durable organic solar cells (OSCs).

Selecting Solid Additives to Control the Interaction between Polymer Donors and Additives for Constructing High-Efficiency Organic Solar Cells

Selecting Solid Additives to Control the Interaction between Polymer Donors and Additives for Constructing High-Efficiency Organic Solar Cells

Hydrogen‐Bonding Interactions Between Terpolymers Enable Excellent Device Efficiency and Operational Stability of Non‐Halogenated Solvent‐Processed Polymer Solar Cells

AbstractAlthough polymer solar cells (PSCs) have shown considerable power conversion efficiency (PCE) potential, their poor operational stability is a major obstacle for their future commercialization. In this study, the ternary‐blend strategy based on D1–A–D1–D2‐type conjugated random terpolymers containing hydrogen–bonding sites is employed to simultaneously improve device efficiency and long‐term stability. Notably, the PM6‐ThEG:PM6‐ThOH:Y6‐BO ternary‐blend system exhibits a remarkable PCE of 17.2% with superior photo, thermal, and mechanical stability, outperforming those of binary devices based on PM6, PM6‐ThEG, and PM6‐ThOH polymer donors. These outstanding results are likely attributed to the robust molecular lock via hydrogen bonds between PM6‐ThEG and PM6‐ThOH terpolymers, which can induce strong intermolecular packing, a dense 3D terpolymer network, and optimized morphology. These results also correlate well with the computational study. A comprehensive analysis of optoelectronic and morphological properties as well as the exploration of underlying physical mechanisms collectively verifies the effectiveness of this approach based on mixed random terpolymers with hydrogen‐bonding moiety to achieve the non‐halogenated solvent‐processed PSCs with exceptional efficiency and operational stability.

High Open-Circuit Voltage Organic Solar Cells with 19.2% Efficiency Enabled by Synergistic Side-Chain Engineering.

Restricted by the energy-gap law, state-of-the-art organic solar cells (OSCs) exhibit relatively low open-circuit voltage (VOC) because of large nonradiative energy losses (ΔEnonrad). Moreover, the trade-off between VOC and external quantum efficiency (EQE) of OSCs is more distinctive; the power conversion efficiencies (PCEs) of OSCs are still <15% with VOCs of >1.0V. Herein, the electronic properties and aggregation behaviors of non-fullerene acceptors (NFAs) are carefully considered and then a new NFA (Z19) is delicately designed by simultaneously introducing alkoxy and phenyl-substituted alkyl chains to the conjugated backbone. Z19 exhibits a hypochromatic-shifted absorption spectrum, high-lying lowest unoccupied molecular orbital energy level and ordered 2D packing mode. The D18:Z19-based blend film exhibits favorable phase separation with face-on dominated molecular orientation, facilitating charge transport properties. Consequently, D18:Z19 binary devices afford an exciting PCE of 19.2% with a high VOC of 1.002V, surpassing Y6-2O-based devices. The former is the highest PCE reported to date for OSCs with VOCs of >1.0V. Moreover, theΔEnonrad of Z19- (0.200eV) and Y6-2O-based (0.155eV) devices are lower than that of Y6-based (0.239eV) devices. Indications are that the design of such NFA, considering the energy-gap law, could promote a new breakthrough in OSCs.

Synchronous Regulation of Donor and Acceptor Microstructure using Thiophene‐Derived Non‐Halogenated Solvent Additives for Efficient and Stable Organic Solar Cells

AbstractSolvent additives are pivotal for enhancing the morphology, efficiency, and stability of organic solar cells (OSCs). However, the widely used additive, 1,8‐diiodooctane (DIO), has drawbacks like harmful halogen content and potential OSC degradation. To address these issues, novel non‐halogenated, thienyl‐alkyl‐thienyl structural solvent additives—DTP, DTH, and DTN—featuring varying alkyl linker lengths of (CH2)3, (CH2)6, and (CH2)9, respectively are introduced. Additives with longer alkyl linkers, DTH and DTN, effectively dissolve and strongly interact with both the donor polymer PM6 and acceptor L8‐BO. This dual interaction enables precise tuning of their microstructures, resulting in enhanced crystallinity. Upon incorporating DTH as an additive in OSCs (PM6:L8‐BO), a minimal voltage loss is observed, leading to an impressive efficiency of 18.51%, surpassing the 17.90% achieved with DIO. Furthermore, DTH‐based devices demonstrated superior photostability. In a ternary blend system (PM6:D18‐Cl:L8‐BO), an efficiency of 19.07% is attained, outperforming previous non‐halogenated solvent additive‐based OSCs. Furthermore, employing a non‐halogenated processing solvent combination of toluene and carbon disulfide, a high PCE of 18.82% is achieved. These results underscore the efficacy of designing solvent additives with aromatic and alkyl units, enabling tailored interactions with the donor and acceptor, thereby presenting a robust strategy for optimizing OSC performance and stability.