DNA-cleaving DNAzyme Research Articles

Spatiotemporally Programmed Disassembly of Multifunctional Integrated DNAzyme Nanoplatfrom for Amplified Intracellular MicroRNA Imaging.

The sensing performance of DNAzymes in live cells is tremendously hampered by the inefficient and inhomogeneous delivery of DNAzyme probes and their incontrollable off-site activation, originating from their susceptibility to nuclease digestion. This requires the development of a more compact and robust DNAzyme-delivering system with site-specific DNAzyme activation property. Herein, a highly compact and robust Zn@DDz nanoplatform is constructed by integrating the unimolecular microRNA-responsive DNA-cleaving DNAzyme (DDz) probe with the requisite DNAzyme Zn2+ -ion cofactors, and the amplified intracellular imaging of microRNA via the spatiotemporally programmed disassembly of Zn@DDz nanoparticles is achieved. The multifunctional Zn@DDz nanoplatform is simply composed of a structurally blocked self-hydrolysis DDz probe and the inorganic Zn2+ -ion bridge, with high loading capacity, and can effectively deliver the initially catalytic inert DDz probe and Zn2+ into living cells with enhanced stabilities. Upon their entry into the acidic microenvironment of living cells, the self-sufficient Zn@DDz nanoparticle is disassembled to release DDz probe and simultaneously supply Zn2+ -ion cofactors. Then, endogenous microRNA-21 catalyzes the reconfiguration and activation of DDz for generating the amplified readout signal with multiply guaranteed imaging performance. Thus, this work paves an effective way for promoting DNAzyme-based biosensing systems in living cells, and shows great promise in clinical diagnosis.

Selection of allosteric dnazymes that can sense phenylalanine by expression-SELEX.

Aptamers are ligand-binding RNA or DNA molecules and have been widely examined as biosensors, diagnostic tools, and therapeutic agents. The application of aptamers as biosensors commonly requires an expression platform to produce a signal to report the aptamer-ligand binding event. Traditionally, aptamer selection and expression platform integration are two independent steps and the aptamer selection requires the immobilization of either the aptamer or the ligand. These drawbacks can be easily overcome through the selection of allosteric DNAzymes (aptazymes). Herein, we used the technique of Expression-SELEX developed in our laboratory to select for aptazymes that can be specifically activated by low concentrations of l-phenylalanine. We chose a previous DNA-cleaving DNAzyme known as II-R1 as the expression platform for its low cleavage rate and used stringent selection conditions to drive the selection of high-performance aptazyme candidates. Three aptazymes were chosen for detailed characterization and these DNAzymes were found to exhibit a dissociation constant for l-phenylalanine as low as 4.8 μM, a catalytic rate constant improvement as high as 20000-fold in the presence of l-phenylalanine, and the ability to discriminate against closely related l-phenylalanine analogs including d-phenylalanine. This work has established the Expression-SELEX as an effective SELEX method to enrich high-quality ligand-responsive aptazymes.

Bioorthogonal Disassembly of Hierarchical DNAzyme Nanogel for High-Performance Intracellular microRNA Imaging.

Rolling circle amplification (RCA) enables the facile construction of compact and versatile DNA nanoassemblies which are yet rarely explored for intracellular analysis. This is might be ascribed to the uncontrollable and inefficient probe integration/activation. Herein, by encoding with tandem allosteric deoxyribozyme (DNA-cleaving DNAzyme), a multifunctional RCA nanogel was established for realizing the efficient intracellular microRNA imaging via the successive activation of the RCA-disassembly module and signal amplification module. The endogenous microRNA stimulates the precise degradation of DNA nanocarriers, thus leading to the efficient exposure of RCA-entrapped DNAzyme biocatalyst for an amplified readout signal. Our bioorthogonal DNAzyme disassembly strategy achieved the robust analysis of intracellular biomolecules, thus showing more prospects in clinical diagnosis.

Activity-enhanced DNAzyme for design of label-free copper(II) biosensor.

Metal ion-driven, DNA-cleaving DNAzymes are characterised by high selectivity and specificity. However, their use for metal ion sensing remains largely unexplored due to long reaction times and poor reaction yields relative to RNA-cleaving DNAzymes and other sensing strategies. Herein we present a study demonstrating a significant rate enhancement of a copper-selective DNA cleaving DNAzyme by both polydopamine (PDA) and gold (Au) nanoparticles (NPs). PDA NPs enhance the reaction through the production of hydrogen peroxide, while for AuNPs the enhancement is aided by the presence of citrate surface moeities, both of which drive the oxidative cleavage of the substrate. A 50-fold enhancement for PDA NPs makes the combination of PDA and DNAzyme suitable for a practical application as a sensitive biosensor for Cu(II) ions. Using DNAzyme deposition onto a gold electrode followed by Polydopamine Assisted DNA Immobilisation (PADI), we achieve a cost-effective, label-free and fast (within 15 min) electrochemical biosensor with a limit of detection of 180 nmol (11 ppm), thus opening a route for the rational design of a new generation of hybrid DNAzyme-based biosensors.

Construction of a Stimuli-Responsive DNAzyme-Braked DNA Nanomachine for the Amplified Imaging of miRNAs in Living Cells and Mice

Construction of a Stimuli-Responsive DNAzyme-Braked DNA Nanomachine for the Amplified Imaging of miRNAs in Living Cells and Mice

Development of an enhanced visual signal amplification assay for GSH detection with DNA-cleaving DNAzyme as a trigger

Glutathione (GSH) plays a significant role in human health. Considering that dietary intake of GSH is an important way to keep GSH levels in the body, it is particularly essential to quantitate the supplemental content of GSH. In this study, an enhanced visual signal amplification assay for GSH detection in food with DNA-cleaving DNAzyme as a trigger was developed. The trigger contained a Trigger-enzyme strand (Pb2+ dependent DNAzyme sequence) and a Trigger-substrate strand. In the absence of GSH, DNAzyme was formed with Pb2+ induction and Trigger-substrate strand was cleaved to release the initiator sequence. Initiator sequence could initiate RCA reaction and generate abundant G-quadruplex sequences. After G-quadruplex/hemin DNAzyme was formed in the presence of G-quadruplex sequences, a visual signal could be produced by catalyzing ABTS. In the presence of GSH, Pb2+ would combine with GSH and there would not be following visual signal production. Thus, GSH could be detected with a “turn-off” strategy and GSH concentration was negatively correlated with color change. Besides, Nb.BbvCI nicking endonuclease was introduced to improve the visual effect. The results could be qualitatively identified by the naked eye and quantitatively analyzed by spectrophotometry (Linearity range: 10 nM to 1 µM, LOD: 3.99 nM) with good selectivity and reliability. We also developed a smartphone-based visual analysis method to make the quantitative analysis independent on a spectrophotometer (Linearity range: 10 nM to 0.5 µM, LOD: 8.17 nM). We believe that this assay showed a good potential for rapid and sensitive detection of GSH in food.

Insight into an Oxidative DNA-Cleaving DNAzyme: Multiple Cofactors, the Catalytic Core Map and a Highly Efficient Variant.

SummaryAn oxidative DNA-cleaving DNAzyme (PL) employs a double-cofactor model “X/Cu2+” for catalysis. Herein, we verified that reduced nicotinamide adenine dinucleotide (NADH), flavin mononucleotide, cysteine, dithiothreitol, catechol, resorcinol, hydroquinone, phloroglucinol, o-phenylenediamine, 3,3′,5,5'-tetramethylbenzidine, and hydroxylamine acted as cofactor X. According to their structural similarities or fluorescence property, we further confirmed that reduced nicotinamide adenine dinucleotide phosphate (NADPH), 2-mercaptoethanol, dopamine, chlorogenic acid, resveratrol, and 5-carboxyfluorescein also functioned as cofactor X. Superoxide anions might be the commonality behind these cofactors. We subsequently determined the conservative change of individual nucleotides in the catalytic core under four different cofactor X. The nucleotides A4 and C5 are highly conserved, whereas the conservative levels of other nucleotides are dependent on the types of cofactor X. Moreover, we observed that the minor change in the PL's secondary structure affects electrophoretic mobility. Finally, we characterized a highly efficient variant T3G and converted its double-cofactor NADH/Cu2+ to sole-cofactor NADH.

Plasmon Coupling Effect-Enhanced Imaging of Metal Ions in Living Cells Using DNAzyme Assembled Core-Satellite Structures.

We demonstrate a core-satellite plasmonic nanoprobe assembled via metal-ion-dependent DNA-cleaving DNAzyme linker for imaging intercellular metal ion based on plasmon coupling effect at a single-particle level. As metal ions are present in the system, the DNAzyme linker will be cleaved, and thus, disassembly of the core-satellite nanoprobes occurs, which results in distinct blue shift of the scattering spectra of Au core-satellite probes and naked color change of the scattering light. This change in scattering spectra has been supported by theoretical simulations. As a proof of concept, sensitive detection of Cu2+ with a limit of detection down to 67.2 pM has been demonstrated. The nanoprobes have been further utilized for intracellular Cu2+ imaging in living cells. The results demonstrate that the present strategy provides a promising platform for detection and imaging of metal ions in living cells and could be potentially applied to imaging other interesting target molecules simply by substituting the oligonucleotide sequence.

A fluorometric histidine biosensor based on the use of a quencher-labeled Cu(II)-dependent DNAzyme

The authors describe a biosensor for histidine that is based on the use of a DNAzyme catalytic beacon. The Cu(II)-dependent DNA-cleaving DNAzyme (Cu-Enzyme) was modified with a quencher (BHQ1) at its 5′ end, and the corresponding substrate strand (Cu-Sub) was modified with a quencher and the FAM fluorophore at its 5′ and 3′ ends, respectively. The green FAM emission of the system is completely quenched after the Cu-Enzyme is hybridized with Cu-Sub. The presence of Cu(II) triggers the cleavage of the Cu-Sub so that fluorescence recovers. Histidine forms a complex with Cu(II) ion. The complex is not capable of cleaving Cu-Sub effectively so that the fluorescence of the system is not restored. These findings were exploited to design a robust and sensitive assay for the determination of histidine. Fluorescence intensity is linearly related to the concentration of histidine in the range between 0.05 and 40 μM, and the detection limit is 20 nM. The method has been successfully applied to the determination of histidine in (spiked) human urine and gave satisfying results.

New cofactors and inhibitors for a DNA-cleaving DNAzyme: superoxide anion and hydrogen peroxide mediated an oxidative cleavage process

Herein, we investigated the effects of new cofactors and inhibitors on an oxidative cleavage of DNA catalysis, known as a pistol-like DNAzyme (PLDz), to discuss its catalytic mechanism. PLDz performed its catalytic activity in the presence of ascorbic acid (AA), in which Cu2+ promoted, whereas Fe2+ significantly inhibited the catalytic function. Since Fe2+/AA-generated hydroxyl radicals are efficient on DNA damage, implying that oxidative cleavage of PLDz had no relation with hydroxyl radical. Subsequently, we used Fe2+/H2O2 and Cu2+/H2O2 to identify the role of hydroxyl radicals in PLDz catalysis. Data showed that PLDz lost its activity with Fe2+/H2O2, but exhibited significant cleavage with Cu2+/H2O2. Because Fe2+/H2O2 and Cu2+/H2O2 are popular reagents to generate hydroxyl radicals and the latter also produces superoxide anions, we excluded the possibility that hydroxyl radical participated in oxidative cleavage and confirmed that superoxide anion was involved in PLDz catalysis. Moreover, pyrogallol, riboflavin and hypoxanthine/xanthine oxidase with superoxide anion and hydrogen peroxide generation also induced self-cleavage of PLDz, where catalase inhibited but superoxide dismutase promoted the catalysis, suggesting that hydrogen peroxide played an essential role in PLDz catalysis. Therefore, we proposed a catalytic mechanism of PLDz in which superoxide anion and hydrogen peroxide mediated an oxidative cleavage process.

DNA Adsorption by ZnO Nanoparticles near Its Solubility Limit: Implications for DNA Fluorescence Quenching and DNAzyme Activity Assays.

Zinc oxide (ZnO) is a highly important material, and Zn(2+) is a key metal ion in biology. ZnO and Zn(2+) interconvert via dissolution and hydrolysis/condensation. In this work, we explore their interactions with DNA, which is important for biointerface, analytical, and bioinorganic chemistry. Fluorescently labeled DNA oligonucleotides were adsorbed by a low concentration (around 5 μg/mL) of ZnO nanoparticles, near the solubility limit. Right after mixing, fluorescence quenching occurred, indicating DNA adsorption. Then, fluorescence recovered, attributable to ZnO dissolution. The dissolution rate followed A5 > T5 > C5. Dissolution was slower with longer DNA. The adsorption affinity was also measured by a displacement assay to be G5 > C5 > T5 > A5, suggesting that tightly adsorbed DNA can retard ZnO dissolution. Electrostatic interactions are important for DNA adsorption because ZnO is positively charged at neutral pH, and a high salt concentration inhibits DNA adsorption. Next, in situ formation of ZnO from Zn(2+) was studied. First, titrating Zn(2+) into a fluorescently labeled oligonucleotide at pH 7.5 resulted in an abrupt fluorescence quenching beyond 0.2 mM Zn(2+). At pH 6, quenching occurred linearly with the Zn(2+) concentration, suggesting the effect of Zn(2+) precipitation at pH 7.5. Second, a Zn(2+)-dependent DNA-cleaving DNAzyme was studied. This DNAzyme was inhibited at higher than 2 mM Zn(2+), attributable to Zn(2+) precipitation and adsorption of the DNAzyme. This paper has established the interplay between DNA, Zn(2+), and ZnO. This understanding can avoid misinterpretation of DNA assay results and adds knowledge to DNA immobilization.

Engineering a DNA-cleaving DNAzyme and PCR into a simple sensor for zinc ion detection

The development of a simple sensor (9NL27-Zn) based on DNAzyme and PCR and aimed at the detection of low concentrations of zinc (II) ions is described. A specific Zn(II)-dependent DNAzyme (9NL27) with DNA-cleaving activity was employed. In the presence of zinc (II), the DNAzyme hydrolyzed DNA substrate into two pieces (5' and 3' fragments), forming 3'-terminal hydroxyl in the 5' fragment and 5'-phosphate in the 3' fragments. Subsequently, the 5' fragment left the DNAzyme and bound a short DNA template. The 5' fragment was used as a primer and extended a single-stranded full-length template by Taq polymerase. Finally, this full-length template was amplified by PCR. The amplified products had a quantitative relationship with Zn(II) concentration. Under our experimental conditions, the DNA sensor showed sensitivity (10 nM) and high specificity for zinc ion detection. After improvement of the DNA sensor, the detection limit can reach 1 nM. The simple DNA sensor may become a DNA model for the detection of trace amounts of other targets.

<I>In Vitro</I> Selection of DNA-cleaving DNAzyme

<I>In Vitro</I> Selection of DNA-cleaving DNAzyme

Label-Free Detection of Cu2+ and Hg2+ Ions Using Reconstructed Cu2+-Specific DNAzyme and G-quadruplex DNAzyme

Label-free metal ion detection methods were developed. To achieve these, a reconstructed Cu2+-specific DNA-cleaving DNAzyme (Cu2+-specific DNAzyme) with an intramolecular stem-loop structure was used. G-quadruplex-forming G-rich sequence(s), linked at the ends of double-helix stem of an intramolecular stem-loop structure, was partly caged in an intramolecular duplex or formed a split G-quadruplex. Cu2+-triggered DNA cleavage at a specific site decreased the stability of the double-helix stem, resulting in the formation or destruction of G-quadruplex DNAzyme that can effectively catalyze the 2,2′-azinobis(3-ethylbenzothiazoline)-6-sulfonic acid (ABTS)-H2O2 reaction. Based on these, two label-free, cost-effective and simple Cu2+ sensors were designed. These two sensors followed different detection modes: ‘turn-on’ and ‘turn-off’. As for the ‘turn-on’ sensor, the intramolecular stem-loop structure ensured a low background signal, and the co-amplification of detection signal by dual DNAzymes (Cu2+-specific DNAzyme and G-quadruplex DNAzyme) provided a high sensitivity. This sensor enabled the selective detection of aqueous Cu2+ with a detection limit of 3.9 nM. Visual detection was possible. Although the ‘turn-off’ sensor gave lower detection sensitivity than the ‘turn-on’ one, the characteristics of cost-effectiveness and ease of operation made it an important implement to reduce the possibility of pseudo-positive or pseudo-negative results. Combining the ability of Hg2+ ion to stabilize T-T base mismatch, above dual DNAzymes-based strategy was further used for Hg2+ sensor design. The proposed sensor allowed the specific detection of Hg2+ ion with a detection of 4.8 nM. Visual detection was also possible.

A label-free fluorescent molecular switch for Cu2+ based on metal ion-triggered DNA-cleaving DNAzyme and DNA intercalator

A label-free fluorescent sensor for the detection of Cu2+ was constructed based on internal DNA cleavage and DNA intercalator SYBR Green I. The DNAzyme complex formed by the hybridization of the enzyme strand and substrate strand has two base-pairing regions including a DNA duplex and a DNA triplex. The copper ion-induced catalytic reaction makes the substrate strand irreversibly break at the cleavage site, which disturbs the formation of DNA strands. The weakly fluorescent dye SYBR Green I served as a fluorescence indicator that intercalated into the base-pairing regions of DNAzyme, resulting in a strong fluorescence emission. In the presence of Cu2+ in the test system, the complementary regions were reduced due to the fracture of the DNA strand. The fluorescence intensity was decreased because SYBR Green I was released from the cleaved regions. Other metal ions had no notable “on-off” phenomenon even at 50 times Cu2+ concentration. Under the optimal conditions, a linear response with Cu2+ concentration ranging from 4 × 10−8 to 120 × 10−8 M was obtained. The detection limit reached as low as 10 nM. Moreover, the cost-effective sensor was successfully applied to the determination of Cu2+ in drinking water.

DNAzyme self-assembled gold nanoparticles for determination of metal ions using fluorescence anisotropy assay

Gold nanoparticles can be exploited to facilitate a highly sensitive and selective metal ion detection based on fluorescence anisotropy assay with metal ion-dependent DNA-cleaving DNAzyme. This assay allows rapid and accurate determination of metal ions in aqueous medium at room temperature. The method has been demonstrated for determination of Cu 2+ and Pb 2+ ions. The detection sensitivity can be significantly improved to 1 nM by using a “nanoparticle enhancement” approach. Moreover, the assay was also tested in 384-well plates for high-throughput routine determination of toxic metal ions in environmental samples. The method showed distinct advantages over conventional methods in terms of its potential sensitivity, specificity, and ability for rapid response.

An Allosteric Dual-DNAzyme Unimolecular Probe for Colorimetric Detection of Copper(II)

An effective dual-DNAzyme-based unimolecular probe design employing intramolecular signal transduction is demonstrated. The probe is composed of three domains: a DNA-cleaving DNAzyme, a substrate, and an HRP-mimicking DNAzyme. When the probe meets its target, cleavage of the substrate by the DNA-cleaving DNAzyme activates the HRP-mimicking DNAzyme, producing a colorimetric signal. The Cu(2+)-dependent DNAzyme engineered to demonstrate this design revealed a sensitivity corresponding to 65 ppb, which is sufficient to detect Cu(2+) in drinking water. The new probe has excellent selectivity toward Cu(2+). This three-component design is simple and easy to engineer. It may provide the basis for future development of other nucleic acid-based probes for toxicological and environmental monitoring.