Discoidal High-density Lipoprotein Particles Research Articles

Assembly of Lipids and Proteins into Lipoprotein Particles

The self-assembly of reconstituted discoidal high-density lipoproteins, known as nanodiscs, was studied using coarse-grained molecular dynamics and small-angle X-ray scattering. In humans, high-density lipoprotein particles transport cholesterol in the blood and facilitate the removal of excess cholesterol from the body. Native high-density lipoprotein exhibits a wide variety of shapes and sizes, forming lipid-free/poor, nascent discoidal, and mature spherical particles. Little is known about how these lipoprotein particles assemble and transform from one state to another. Multiple 10 micros coarse-grained simulations reveal the assembly of discoidal high-density lipoprotein particles from disordered protein-lipid complexes. Small-angle X-ray scattering patterns were calculated from the final assembled structures and compared with experimental measurements carried out for this study to verify the accuracy of the coarse-grained simulations. Results show that hydrophobic interactions assemble, within several microseconds, the amphipathic helical proteins and lipids into roughly discoidal particles, while the proteins assume a final approximate double-belt configuration on a slower time scale.

Mechanism of ATP-binding Cassette Transporter A1-mediated Cellular Lipid Efflux to Apolipoprotein A-I and Formation of High Density Lipoprotein Particles

The ATP-binding cassette transporter A1 (ABCA1) plays a critical role in the biogenesis of high density lipoprotein (HDL) particles and in mediating cellular cholesterol efflux. The mechanism by which ABCA1 achieves these effects is not established, despite extensive investigation. Here, we present a model that explains the essential features, especially the effects of ABCA1 activity in inducing apolipoprotein (apo) A-I binding to cells and the compositions of the discoidal HDL particles that are produced. The apo A-I/ABCA1 reaction scheme involves three steps. First, there is binding of a small regulatory pool of apo A-I to ABCA1, thereby enhancing net phospholipid translocation to the plasma membrane exofacial leaflet; this leads to unequal lateral packing densities in the two leaflets of the phospholipid bilayer. Second, the resultant membrane strain is relieved by bending and by creation of exovesiculated lipid domains. The formation of highly curved membrane surface promotes high affinity binding of apo A-I to these domains. Third, this pool of bound apo A-I spontaneously solubilizes the exovesiculated domain to create discoidal nascent HDL particles. These particles contain two, three, or four molecules of apo A-I and a complement of membrane phospholipid classes together with some cholesterol. A key feature of this mechanism is that membrane bending induced by ABCA1 lipid translocase activity creates the conditions required for nascent HDL assembly by apo A-I. Overall, this mechanism is consistent with the known properties of ABCA1 and apo A-I and reconciles many of the apparently discrepant findings in the literature.

Residues Leu261, Trp264, and Phe265 Account for Apolipoprotein E-Induced Dyslipidemia and Affect the Formation of Apolipoprotein E-Containing High-Density Lipoprotein

Overexpression of apolipoprotein E (apoE) induces hypertriglyceridemia in apoE-deficient mice, which is abrogated by deletion of the carboxy-terminal segment of residues 260-299. We have used adenovirus-mediated gene transfer in apoE-/- and apoA-I-/- mice to test the effect of three sets of apoE mutations within the region of residues 261-265 on the induction of hypertriglyceridemia, the esterification of cholesterol of very low-density lipoprotein (VLDL) and high-density lipoprotein (HDL), and the formation of spherical or discoidal apoE-containing HDL. A single-amino acid substitution (apoE4[Phe265Ala]) induced hypertriglyceridemia in apoE-/- or apoA-I-/- mice, promoted the accumulation of free cholesterol in the very low-density lipoprotein (VLDL) and HDL region, and decreased HDL cholesterol levels. A double substitution (apoE4[Leu261Ala/Trp264Ala]) induced milder hypertriglyceridemia and increased HDL cholesterol levels. A triple substitution (apoE4[Leu261Ala/Trp264Ala/Phe265Ala] or apoE2[Leu261Ala/Trp264Ala/Phe265Ala]) did not induce hypertriglyceridemia and increased greatly the HDL cholesterol levels. Electron microscopy (EM) analysis of the HDL fractions showed that apoE4[Leu261Ala/Trp264Ala/Phe265Ala] and apoE2[Leu261Ala/Trp264Ala/Phe265Ala] contained spherical HDL, apoE4[Leu261Ala/Trp264Ala] contained mostly spherical and few discoidal HDL particles, and apoE4[Phe265Ala] contained discoidal HDL. We conclude that residues Leu261, Trp264, and Phe265 play an important role in apoE-induced hypertriglyceridemia, the accumulation of free cholesterol in VLDL and HDL, and the formation of discoidal HDL. Substitution of these residues with Ala improves the apoE functions by preventing hypertriglyceridemia and promoting formation of spherical apoE-containing HDL.

A Dominant Negative Form of the Transcription Factor c-Jun Affects Genes That Have Opposing Effects on Lipid Homeostasis in Mice

c-Jun is a transcription factor activated by phosphorylation by the stress-activated protein kinase/c-Jun N-terminal kinase pathway in response to extracellular signals and cytokines. We show that adenovirus-mediated gene transfer of the dominant negative form of c-Jun (dn-c-Jun) in C57BL/6 mice increased greatly apoE hepatic mRNA and plasma levels, increased plasma cholesterol, triglyceride, and very low density lipoprotein levels, and resulted in the accumulation of discoidal high density lipoprotein particles. A similar but more severe phenotype was generated by overexpression of the mouse apoE in C57BL/6 mice, suggesting that dyslipidemia induced by dn-c-Jun was the result of apoE overexpression. Unexpectedly, infection of apoE(-/-) mice with adenovirus expressing dn-c-Jun reduced plasma cholesterol by 70%, suggesting that dn-c-Jun affected other genes that control plasma cholesterol levels. To identify these genes, we performed whole genome expression analysis (34,000 genes) of isolated livers from two groups of five apoE(-/-) mice, infected with adenoviruses expressing either the dn-c-Jun or the green fluorescence protein. Bioinformatic analysis and Northern blotting validation revealed that dn-c-Jun increased 40-fold the apoE mRNA and reduced by 70% the Scd-1 (stearoyl-CoA-desaturase 1) mRNA. The involvement of Scd-1 in lowering plasma cholesterol was confirmed by restoration of high cholesterol levels of apoE(-/-) mice following coinfection with adenoviruses expressing dn-c-Jun and Scd-1. In conclusion, dn-c-Jun appears to trigger two opposing events in mice that affect plasma cholesterol and triglyceride levels as follows: one results in apoE overexpression and triggers dyslipidemia and the other results in inhibition of Scd-1 and offsets dyslipidemia.

Pathway of biogenesis of apolipoprotein E-containing HDL in vivo with the participation of ABCA1 and LCAT

We have investigated the ability of apoE (apolipoprotein E) to participate in the biogenesis of HDL (high-density lipoprotein) particles in vivo using adenovirus-mediated gene transfer in apoA-I-/- (apolipoprotein A-I) or ABCA1-/- (ATP-binding cassette A1) mice. Infection of apoA-I-/- mice with 2x10(9) pfu (plaque-forming units) of an apoE4-expressing adenovirus increased both HDL and the triacylglycerol-rich VLDL (very-low-density lipoprotein)/IDL (intermediate-density lipoprotein)/LDL (low-density lipoprotein) fraction and generated discoidal HDL particles. ABCA1-/- mice treated similarly failed to form HDL particles, suggesting that ABCA1 is essential for the generation of apoE-containing HDL. Combined infection of apoA-I-/- mice with a mixture of adenoviruses expressing both apoE4 (2x10(9) pfu) and human LCAT (lecithin:cholesterol acyltransferase) (5x10(8) pfu) cleared the triacylglycerol-rich lipoproteins, increased HDL and converted the discoidal HDL into spherical HDL. Similarly, co-infection of apoE-/- mice with apoE4 and human LCAT corrected the hypercholesterolaemia and generated spherical particles, suggesting that LCAT is essential for the maturation of apoE-containing HDL. Overall, the findings indicate that apoE has a dual functionality. In addition to its documented functions in the clearance of triacylglycerol-rich lipoproteins, it participates in the biogenesis of HDL-sized apoE-containing particles. HDL particles generated by this pathway may account at least for some of the atheroprotective functions of apoE.

Assembly of lipoprotein particles revealed by coarse-grained molecular dynamics simulations

High-density lipoproteins (HDL) function as cholesterol transporters, facilitating the removal of excess cholesterol from the body. Due to the heterogeneity of native HDL particles (both in size and shape), the details on how these protein–lipid particles form and the structure they assume in their lipid-associated states are not well characterized. We report here a study of the self-assembly of discoidal HDL particles using coarse-grained (CG) molecular dynamics. The microsecond simulations reveal the self-assembly of HDL particles from disordered protein–lipid complexes to form structures containing many of the features of the generally accepted double-belt model for discoidal HDL particles. HDL assembly is found to proceed in two broad steps, aggregation of proteins and lipids driven by the hydrophobic effect which occurs on a ∼1 μs time scale, followed by the optimization of the protein structure driven by increasingly specific protein–protein interactions.

Novel Changes in Discoidal High Density Lipoprotein Morphology: A Molecular Dynamics Study

ApoA-I is a uniquely flexible lipid-scavenging protein capable of incorporating phospholipids into stable particles. Here we report molecular dynamics simulations on a series of progressively smaller discoidal high density lipoprotein particles produced by incremental removal of palmitoyloleoylphosphatidylcholine via four different pathways. The starting model contained 160 palmitoyloleoylphosphatidylcholines and a belt of two antiparallel amphipathic helical lipid-associating domains of apolipoprotein (apo) A-I. The results are particularly compelling. After a few nanoseconds of molecular dynamics simulation, independent of the starting particle and method of size reduction, all simulated double belts of the four lipidated apoA-I particles have helical domains that impressively approximate the x-ray crystal structure of lipid-free apoA-I, particularly between residues 88 and 186. These results provide atomic resolution models for two of the particles produced by in vitro reconstitution of nascent high density lipoprotein particles. These particles, measuring 95 Å and 78 Å by nondenaturing gradient gel electrophoresis, correspond in composition and in size/shape (by negative stain electron microscopy) to the simulated particles with molar ratios of 100:2 and 50:2, respectively. The lipids of the 100:2 particle family form minimal surfaces at their monolayer-monolayer interface, whereas the 50:2 particle family displays a lipid pocket capable of binding a dynamic range of phospholipid molecules.

Role of apoA-I, ABCA1, LCAT, and SR-BI in the biogenesis of HDL

The concentration, composition, shape, and size of plasma high-density lipoprotein (HDL) are determined by numerous proteins that influence its biogenesis, remodeling, and catabolism. The discoveries of the HDL receptor (scavenger receptor class B type I, SR-BI) and the ABCA1 (ATP-binding cassette transporter A1) lipid transporter provided two missing links that were necessary to understand the biogenesis and some of the functions of HDL. Existing data indicate that functional interactions between apoA-I and ABCA1 are necessary for the initial lipidation of apoA-I. Through a series of intermediate steps, lipidated apoA-I proceeds to form discoidal HDL particles that can be converted to spherical particles by the action of lecithin:cholesterol acyltransferase (LCAT). Discoidal and spherical HDL can interact functionally with SR-BI and these interactions lead to selective lipid uptake and net efflux of cholesterol and thus remodel HDL. Defective apoA-I/ABCA1 interactions prevent lipidation of apoA-I that is necessary for the formation of HDL particles. In the same way, specific mutations in apoA-I or LCAT prevent the conversion of discoidal to spherical HDL particles. The interactions of lipid-bound apoA-I with SR-BI are affected in vitro by specific mutations in apoA-I or SR-BI. Furthermore, deficiency of SR-BI affects the lipid and apolipoprotein composition of HDL and is associated with increased susceptibility to atherosclerosis. Here we review the current status of the pathway of HDL biogenesis and mutations in apoA-I, ABCA1, and SR-BI that disrupt different steps of the pathway and may lead to dyslipidemia and atherosclerosis in mouse models. The phenotypes generated in experimental mouse models for apoA-I, ABCA1, LCAT, SR-BI, and other proteins of the HDL pathway may facilitate early diagnosis of similar phenotypes in the human population and provide guidance for proper treatment.

The biotin-capture lipid affinity assay: a rapid method for determining lipid binding parameters for apolipoproteins

The lipid affinity of plasma apolipoproteins is an important modulator of lipoprotein metabolism. Mutagenesis techniques have been widely used to modulate apolipoprotein lipid affinity for studying biological function, but the approach requires rapid and reliable lipid affinity assays to compare the mutants. Here, we describe a novel method that measures apolipoprotein binding to a standardized preparation of small unilamellar vesicles (SUVs) containing trace biotinylated and fluorescent phospholipids. After a 30 min incubation at various apolipoprotein concentrations, vesicle-bound protein is rapidly separated from free protein on columns of immobilized streptavidin in a 96-well microplate format. Vesicle-bound protein and lipid are eluted and measured in a fluorescence microplate reader for calculation of a dissociation constant and the maximum number of potential binding sites on the SUVs. Using human apolipoprotein A-I (apoA-I), apoA-IV, and mutants of each, we show that the assay generates binding constants that are comparable to other methods and is reproducible across time and apolipoprotein preparations. The assay is easy to perform and can measure triplicate binding parameters for up to 10 separate apolipoproteins in 3.5 h, consuming only 120 microg of apolipoprotein in total. The benefits and potential drawbacks of the assay are discussed.

Coarse Grained Protein−Lipid Model with Application to Lipoprotein Particles

A coarse-grained model for molecular dynamics simulations is extended from lipids to proteins. In the framework of such models pioneered by Klein, atoms are described group-wise by beads, with the interactions between beads governed by effective potentials. The extension developed here is based on a coarse-grained lipid model developed previously by Marrink et al., although future versions will reconcile the approach taken with the systematic approach of Klein and other authors. Each amino acid of the protein is represented by two coarse-grained beads, one for the backbone (identical for all residues) and one for the side-chain (which differs depending on the residue type). The coarse-graining reduces the system size about 10-fold and allows integration time steps of 25-50 fs. The model is applied to simulations of discoidal high-density lipoprotein particles involving water, lipids, and two primarily helical proteins. These particles are an ideal test system for the extension of coarse-grained models. Our model proved to be reliable in maintaining the shape of preassembled particles and in reproducing the overall structural features of high-density lipoproteins accurately. Microsecond simulations of lipoprotein assembly revealed the formation of a protein-lipid complex in which two proteins are attached to either side of a discoidal lipid bilayer.

Deletions of Helices 2 and 3 of Human ApoA-I Are Associated with Severe Dyslipidemia following Adenovirus-Mediated Gene Transfer in ApoA-I-Deficient Mice

The objective of this study was to determine the effect of two amino-terminal apolipoprotein A-I (apoA-I) deletions on high-density lipoprotein (HDL) biosynthesis and lipid homeostasis. Adenovirus-mediated gene transfer showed that the apoA-I[Delta(89-99)] deletion mutant caused hypercholesterolemia, characterized by increased plasma cholesterol and phospholipids, that were distributed in the very low density/intermediate density/low-density lipoprotein (VLDL/IDL/LDL) region, and normal triglycerides. The capacity of the mutant protein to promote ATP-binding cassette transporter A1- (ABCA1-) mediated cholesterol efflux and to activate lecithin:cholesterol acyltranserase (LCAT) was approximately 70-80% of the wild-type (WT) control. The phospholipid transfer protein (PLTP) activity of plasma containing the apoA-I[Delta(89-99)] mutant was decreased to 32% of the WT control. Similar analysis showed that the apoA-I[Delta(62-78)] deletion mutant in apoA-I-deficient mice caused combined hyperlipidemia characterized by increased triglycerides, cholesterol, and phospholipids in the VLDL/IDL region. There was enrichment of the VLDL/IDL with mutant apoA-I that resulted in reduction of in vitro lipolysis. The capacity of this mutant to promote ABCA1-mediated cholesterol efflux was normal, and the capacity to activate LCAT in vitro was reduced by 53%. The WT apoA-I and the apoA-I[Delta(62-78)] mutant formed spherical HDL particles, whereas the apoA-I[Delta(89-99)] mutant formed discoidal HDL particles. We conclude that alterations in apoA-I not only may have adverse effects on HDL biosynthesis but also may promote dyslipidemia due to interference of the apoA-I mutants on the overall cholesterol and triglycerides homeostasis.

Structural investigation of reconstituted high density lipoproteins by scanning tunnelling microscopy

Being able to participate in the reverse cholesterol transport (RCT), high density lipoproteins (HDL) are known to be anti-atherogenic. In order to understand such a process, it is thus essential to have a detailed knowledge of the structure and molecular organisation of HDL. Reconstituted nascent high density lipoproteins (r-HDL), consisting of synthetic phospholipids together with different apolipoproteins (apo A-I, A-IV and E), were thus analysed by scanning tunnelling microscopy (STM). Both shape and dimensions of the discoidal HDL particles measured by this technique were found in good agreement with the data available from the literature. The accuracy of the STM pictures presented in this paper enables for the first time the visualisation of the molecular organisation of such macromolecules. The arrangement of the protein as antiparallel helical segments, is consistent with the general mode of organisation of apolipoprotein/phospholipid discoidal particles previously reported.

Helix Orientation of the Functional Domains in Apolipoprotein E in Discoidal High Density Lipoprotein Particles

Human apolipoprotein E (apoE) mediates high affinity binding to the low density lipoprotein receptor when present on a lipidated complex. In the absence of lipid, however, apoE does not bind the receptor. Whereas the x-ray structure of lipid-free apoE3 N-terminal (NT) domain is known, the structural organization of its lipid-associated, receptor-active conformation is poorly understood. To study the organization of apoE amphipathic alpha-helices in a lipid-associated state, single tryptophan-containing apoE3 variants were employed in fluorescence quenching studies. The relative positions of the Trp residues with respect to the phospholipid component of apoE/lipid particles were established from the degree of quenching by phospholipids bearing nitroxide groups at various positions along their fatty acyl chains. Four apoE3-NT variants bearing Trp reporter groups at positions 141, 148, 155, or 162 within helix 4 and two apoE3 variants containing single Trp at positions 257 or 264 in the C-terminal (CT) domain, were reconstituted into phospholipid-containing discoidal complexes. Parallax analysis revealed that each engineered Trp residue in helix 4 of apoE3-NT, as well as those in the CT domain of apoE, localized approximately 5 A from the center of the bilayer. Circular dichroism studies revealed that lipid association induces additional helix formation in apoE. Protease protection assays suggest the flexible loop segment between the NT and CT domains may transition from unstructured to helix upon lipid association. Taken together, these data support a model wherein the alpha-helices in the receptor-binding region and the CT domain of apoE align perpendicular to the fatty acyl chains of the phospholipid bilayer. In this alignment, the residues of helix 4 are arrayed in a positively charged, curved helical segment for optimal receptor interaction.

Scavenger Receptor Class B Type I-mediated Cholesteryl Ester-selective Uptake and Efflux of Unesterified Cholesterol: INFLUENCE OF HIGH DENSITY LIPOPROTEIN SIZE AND STRUCTURE

Scavenger receptor (SR)-BI catalyzes the selective uptake of cholesteryl ester (CE) from high density lipoprotein (HDL) by a two-step process that involves the following: 1) binding of HDL to the receptor and 2) diffusion of the CE molecules into the cell plasma membrane. We examined the effects of the size of discoidal HDL particles containing wild-type (WT) apoA-I on selective uptake of CE and efflux of cellular free (unesterified) cholesterol (FC) from COS-7 cells expressing SR-BI to determine the following: 1) the influence of apoA-I conformation on the lipid transfer process, and 2) the contribution of receptor binding-dependent processes to the overall efflux of cellular FC. Large (10 nm diameter) reconstituted HDL bound to SR-BI better (B(max) approximately 420 versus 220 ng of apoA-I/mg cell protein), delivered more CE, and promoted more FC efflux than small ( approximately 8 nm) particles. When normalized to the number of reconstituted HDL particles bound to the receptor, the efficiencies of either CE uptake or FC efflux with these particles were the same indicating that altering the conformation of WT apoA-I modulates binding to the receptor (step 1) but does not change the efficiency of the subsequent lipid transfer (step 2); this implies that binding induces an optimal alignment of the WT apoA-I.SR-BI complex so that the efficiency of lipid transfer is always the same. FC efflux to HDL is affected both by binding of HDL to SR-BI and by the ability of the receptor to perturb the packing of FC molecules in the cell plasma membrane.

Molecular Dynamics Simulations on Discoidal HDL Particles Suggest a Mechanism for Rotation in the Apo A-I Belt Model

Apolipoprotein A-I (apo A-I) is the major protein component of high-density lipoprotein (HDL) particles. Elevated levels of HDL in the bloodstream have been shown to correlate strongly with a reduced risk factor for atherosclerosis. Molecular dynamics simulations have been carried out on three separate model discoidal high-density lipoprotein particles (HDL) containing two monomers of apo A-I and 160 molecules of palmitoyloleoylphosphatidylcholine (POPC), to a time-scale of 1 ns. The starting structures were on the basis of previously published molecular belt models of HDL consisting of the lipid-binding C-terminal domain (residues 44–243) wrapped around the circumference of a discoidal HDL particle. Subtle changes between two of the starting structures resulted in significantly different behavior during the course of the simulation. The results provide support for the hypothesis of Segrest et al. that helical registration in the molecular belt model of apo A-I is modulated by intermolecular salt bridges. In addition, we propose an explanation for the presence of proline punctuation in the molecular belt model, and for the presence of two 11-mer helical repeats interrupting the otherwise regular pattern of 22-mer helical repeats in the lipid-binding domain of apo A-I.

Apolipoprotein A-I Adopts a Belt-like Orientation in Reconstituted High Density Lipoproteins

Apolipoprotein A-I (apoA-I) is the major protein associated with high density lipoprotein (HDL), and its plasma levels have been correlated with protection against atherosclerosis. Unfortunately, the structural basis of this phenomenon is not fully understood. Over 25 years of study have produced two general models of apoA-I structure in discoidal HDL complexes. The "belt" model states that the amphipathic helices of apoA-I are aligned perpendicular to the acyl chains of the lipid bilayer, whereas the "picket fence" model argues that the helices are aligned parallel with the acyl chains. To distinguish between the two models, various single tryptophan mutants of apoA-I were analyzed in reconstituted, discoidal HDL particles composed of phospholipids containing nitroxide spin labels at various positions along the acyl chain. We have previously used this technique to show that the orientation of helix 4 of apoA-I is most consistent with the belt model. In this study, we performed additional control experiments on helix 4, and we extended the results by performing the same analysis on the remaining 22-mer helices (helices 1, 2, 5, 6, 7, 8, and 10) of human apoA-I. For each helix, two different mutants were produced that each contained a probe Trp occurring two helical turns apart. In the belt model, the two Trp residues in each helix should exhibit maximal quenching at the same nitroxide group position on the lipid acyl chains. For the picket fence model, maximal quenching should occur at two different levels in the bilayer. The results show that the majority of the helices are in an orientation that is consistent with a belt model, because most Trp residues localized to a position about 5 A from the center of the bilayer. This study corroborates a belt hypothesis for the majority of the helices of apoA-I in phospholipid discs.

Structural studies of discoidal lipoprotein A-I.

Apolipoprotein A-I (apoA-I) is a major exchangeable apolipoprotein of high-density lipoproteins (HDLs), and plays an important role in reverse cholesterol transport. This process involves transport of cholesterol from peripheral tissues to the liver for processing, thereby eliminating excess cholesterol from the body. The function of apoA-I and its interaction with other components of HDL, including lecithin-cholesterol acyltransferase, seems to be closely linked to its structural plasticity. ApoA-I is likely to undergo changes in its structure and orientation between the various HDL subclasses and, therefore, knowledge of the precise structure of apoA-I is essential for understanding its role in the antiatherogenic properties of HDL. This review focuses on the role of apoA-I in reverse cholesterol transport and the work done by various groups to determine the structure of apoA-I in discoidal HDL particles.

Molecular Belt Models for the Apolipoprotein A-I Paris and Milano Mutations

Models for the binding of the 200-residue carboxy-terminal domain of two mutants of apolipoprotein A-I (apo A-I), apo A-I(R173C) Milano and apo A-I(R151C) Paris, to lipid in discoidal high-density lipoprotein (HDL) particles are presented. In both models, two monomers of the mutant apo A-I molecule bind to lipid in an antiparallel manner, with the long axes of their helical repeats running perpendicular to the normal of the lipid bilayer to form a single disulfide-linked homodimer. The overall structures of the models of these two mutants are very similar, differing only in helix-helix registration. Thus these models are consistent with experimental observations that reconstituted HDL particles containing apo A-I Milano and apo A-I Paris are very similar in diameter to reconstituted HDL particles containing wild-type apo A-I, and they support the belief that apo A-I binds to lipid in discoidal HDL particles via the belt conformation.

The Orientation of Helix 4 in Apolipoprotein A-I-containing Reconstituted High Density Lipoproteins

The three-dimensional structure of the high density lipoprotein (HDL) component apolipoprotein (apo) A-I and the molecular basis for its protection against coronary artery disease are unknown. In terms of discoidal HDL particles, there has been a debate as to the orientation of the apoA-I alpha-helices around the disc edge. The "picket fence" model states that the alpha-helical repeats, separated by turns, are arranged parallel to the phospholipid acyl chains of the enclosed lipid bilayer. On the other hand, the "belt" model states that the helical segments run perpendicular to the acyl chains. To distinguish between these models, we used nitroxide spin labels present at various depths in the bilayer of reconstituted HDL (rHDL) to measure the position of Trp residues in single Trp mutants of human proapoA-I. Two mutants were studied; the first contained a Trp at position 108, which was located near the center of helix 4. The second contained a Trp at position 115, two turns along the same helix. The picket fence model predicts that these Trp residues should be at different depths in the bilayer, whereas the belt model predicts that they should be at similar depths. Different sized rHDL particles were produced that contained 2, 3, and >4 molecules of proapoA-I per complex. In each case, parallax analysis indicated that Trp-108 and Trp-115 were present at similar depths of about 6 A from the center of the bilayer, consistent with helix 4 being oriented perpendicular to the acyl chains (in agreement with the belt model). Similar experiments showed that control transmembrane peptides were oriented parallel to the acyl chains in vesicles, demonstrating that the method was capable of distinguishing between the two models. This study provides one of the first experimental measurements of the location of an apoA-I helix with respect to the bilayer edge.

A Detailed Molecular Belt Model for Apolipoprotein A-I in Discoidal High Density Lipoprotein

Apolipoprotein A-I (apoA-I) is the principal protein of high density lipoprotein particles (HDL). ApoA-I contains a globular N-terminal domain (residues 1-43) and a lipid-binding C-terminal domain (residues 44-243). Here we propose a detailed model for the smallest discoidal HDL, consisting of two apoA-I molecules wrapped beltwise around a small patch of bilayer containing 160 lipid molecules. The C-terminal domain of each monomer is ringlike, a curved, planar amphipathic alpha helix with an average of 3.67 residues per turn, and with the hydrophobic surface curved toward the lipids. We have explored all possible geometries for forming the dimer of stacked rings, subject to the hypothesis that the optimal geometry will maximize intermolecular salt bridge interactions. The resulting model is an antiparallel arrangement with an alignment matching that of the (nonplanar) crystal structure of lipid-free apoA-I.