Differentiation Of MG63 Osteoblast-like Cells Research Articles

Antibacterial and Osteogenic Doxycycline Imprinted Bioglass Microspheres to Combat Bone Infection.

Currently, postoperative infection is a significant challenge in bone and dental surgical procedures, demanding the exploration of innovative approaches due to the prevalence of antibiotic-resistant bacteria. This study aims to develop a strategy for controlled and smart antibiotic release while accelerating osteogenesis to expedite bone healing. In this regard, temperature-responsive doxycycline (DOX) imprinted bioglass microspheres (BGMs) were synthesized. Following the formation of chitosan-modified BGMs, poly N-isopropylacrylamide (pNIPAm) was used for surface imprinting of DOX. The temperature-responsive molecularly imprinted polymers (MIPs) exhibited pH and temperature dual-responsive adsorption and controlled-release properties for DOX. The temperature-responsive MIP was optimized by investigating the molar ratio of N,N'-methylene bis(acrylamide) (MBA, the cross-linker) to NIPAm. Our results demonstrated that the MIPs showed superior adsorption capacity (96.85 mg/g at 35 °C, pH = 7) than nonimprinted polymers (NIPs) and manifested a favorable selectivity toward DOX. The adsorption behavior of DOX on the MIPs fit well with the Langmuir model and the pseudo-second-order kinetic model. Drug release studies demonstrated a controlled release of DOX due to imprinted cavities, which were fitted with the Korsmeyer-Peppas kinetic model. DOX-imprinted BGMs also revealed comparable antibacterial effects against Staphylococcus aureus and Escherichia coli to the DOX (control). In addition, MIPs promoted viability and osteogenic differentiation of MG63 osteoblast-like cells. Overall, the findings demonstrate the significant potential of DOX-imprinted BGMs for use in bone defects. Nonetheless, further in vitro investigations and subsequent in vivo experiments are warranted to advance this research.

The Effect of Strontium-Substituted Hydroxyapatite Nanofibrous Matrix on Osteoblast Proliferation and Differentiation.

Natural bone tissue consists primarily of bioapatite and collagen. Synthetic hydroxyapatite (HA) possesses good biocompatibility, bioactivity, and osteoconductivity due to its chemical and biological similarity to bioapatite. Hence, HA has been widely used as a bone graft, cell carrier and drug/gene delivery carrier. Moreover, strontium-substituted hydroxyapatite (SrHA) can enhance osteogenic differentiation and inhibit adipogenic differentiation of mesenchymal stem cells. Hence, SrHA has the potential to be used as a bone graft for bone regeneration. It is widely accepted that cell adhesion and most cellular activities are sensitive to the topography and molecular composition of the matrix. Electrospun polymer or polymer-bioceramic composite nanofibers have been demonstrated to enhance osteoblast differentiation. However, to date, no studies have investigated the effect of nanofibrous bioceramic matrices on osteoblasts. In this study, hydroxyapatite nanofiber (HANF) and strontium-substituted hydroxyapatite nanofiber (SrHANF) matrices were fabricated by electrospinning. The effect of the HANF components on MG63 osteoblast-like cells was evaluated by cell morphology, proliferation, alkaline phosphatase activity (ALP) and gene expression levels of RUNX2, COLI, OCN and BSP. The results showed that MG63 osteoblast-like cells exhibited higher ALP and gene expression levels of RUNX2, COLI, BSP and OCN on the SrHANF matrix than the HANF matrix. Hence, SrHANFs could enhance the differentiation of MG63 osteoblast-like cells.

The Effects of Chemical Etching and Ultra-Fine Grain Structure of Titanium on MG-63 Cells Response

In this work, we study the influence of the surface properties of ultrafine grained (UFG) and coarse grained (CG) titanium on the morphology, viability, proliferation and differentiation of osteoblast-like MG-63 cells. Wet chemical etching in H2SO4/H2O2 and NH4OH/H2O2 solutions was used for producing surfaces with varying morphology, topography, composition and wettability. The topography and morphology have been studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The composition was determined by time of flight mass-spectrometry (TOF-SIMS) and X-ray photoelectron spectroscopy (XPS). The results showed that it is possible to obtain samples with different compositions, hydrophilicity, topography and nanoscale or/and microscale structures by changing the etching time and the type of etching solution. It was found that developed topography and morphology can improve spreading and proliferation rate of MG-63 cells. A significant advantage of the samples of the UFG series in comparison with CG in adhesion, proliferation at later stages of cultivation (7 days), higher alkaline phosphatase (ALP) activity and faster achievement of its maximum values was found. However, there is no clear benefit of the UFG series on osteopontin (OPN) expression. All studied samples showed no cytotoxicity towards MG-63 cells and promoted their osteogenic differentiation.

Collagen Scaffolds Containing Hydroxyapatite-CaO Fiber Fragments for Bone Tissue Engineering

Collagen (COL) and hydroxyapatite (HAp) are the major components of bone, therefore, COL-HAp composites have been widely used as bone substitutes to promote bone regeneration. We have reported that HAp-CaO fibers (HANFs), which were fabricated by a sol-gel route followed by an electrospinning technique, possessed good drug-loading efficiency and limited the burst release of tetracycline. In the present study, we used HANF fragments to evaluate the effects of COL-HANF scaffolds on MG63 osteoblast-like cell behaviors. COL-HANF composite scaffolds in which the average diameter of HANFs was approximately 461 ± 186 nm were fabricated by a freeze-drying process. The alkaline phosphatase activity and the protein expression levels of OCN and BSP showed that compared with COL alone, the COL-HANF scaffold promoted the differentiation of MG63 osteoblast-like cells. In addition, the bone regeneration ability of the COL-HANF scaffold was examined by using a rabbit condylar defect model in vivo. The COL-HANF scaffold was biodegradable and promoted bone regeneration eight weeks after the operation. Hence, we concluded that the COL-HANF scaffold has potential as a bone graft for bone tissue engineering.

Effects of ultraviolet treatment and alendronate immersion on osteoblast-like cells and human gingival fibroblasts cultured on titanium surfaces

In this study, we evaluated the effects of ultraviolet (UV) treatment and alendronate (ALN) immersion on the proliferation and differentiation of MG-63 osteoblast-like cells and human gingival fibroblasts (HGFs) cultured on titanium surfaces. MG-63 cells were used for sandblasted, large grit, and acid-etched (SLA) titanium surfaces, and HGFs were used for machined (MA) titanium surfaces. SLA and MA specimens were subdivided into four groups (n = 12) according to the combination of surface treatments (UV treatment and/or ALN immersion) applied. After culturing MG-63 cells and HGFs on titanium discs, cellular morphology, proliferation, and differentiation were evaluated. The results revealed that UV treatment of titanium surfaces did not alter the proliferation of MG-63 cells; however, HGF differentiation and adhesion were increased in response to UV treatment. In contrast, ALN immersion of titanium discs reduced MG-63 cell proliferation and changed HGFs into a more atrophic form. Simultaneous application of UV treatment and ALN immersion induced greater differentiation of MG-63 cells. Within the limitations of this cellular level study, simultaneous application of UV treatment and ALN immersion of titanium surfaces was shown to improve the osseointegration of titanium implants; in addition, UV treatment may be used to enhance mucosal sealing of titanium abutments.

Graphene-Oxide-Decorated Microporous Polyetheretherketone with Superior Antibacterial Capability and In Vitro Osteogenesis for Orthopedic Implant.

Due to its similar elastic modulus of human bones, polyetheretherketone (PEEK) has been considered as an excellent cytocompatible material. However, the bioinertness, poor osteoconduction, and weak antibacterial activity of PEEK limit its wide applications in clinics. In this study, a facile strategy is developed to prepare graphene oxide (GO) modified sulfonated polyetheretherketone (SPEEK) (GO-SPEEK) through a simple dip-coating method. After detailed characterization, it is found that the GO closely deposits on the surface of PEEK, which is attributed to the π-π stacking interaction between PEEK and GO. Antibacterial tests reveal that the GO-SPEEK exhibits excellent suppression toward Escherichia coli. In vitro cell attachment, growth, differentiation, alkaline phosphatase activity, quantitative real-time polymerase chain reaction analyses, and calcium mineral deposition all illustrate that the GO-SPEEK substrate can significantly accelerate the proliferation and osteogenic differentiation of osteoblast-like MG-63 cells compared with those on PEEK and SPEEK groups. These results suggest that the GO-SPEEK has an improved antibacterial activity and cytocompatibility in vitro, showing that the developed GO-SPEEK has a great potential as the bioactive implant material in bone tissue engineering.

Differential effects of amnion and chorion membrane extracts on osteoblast-like cells due to the different growth factor composition of the extracts.

Human amniotic membrane extracts contain numerous growth factors and bioactive substances. However, osteogenic effects of amnion and chorion membrane extracts (AME and CME, respectively) on osteoblasts are unclear. In this study, we explored the ability of AME and CME to promote the osteogenic differentiation of osteoblast-like MG-63 cells. MG-63 cells were cultured in osteogenic induction medium (OIM) with or without exogenous AME and CME. CME enhanced the osteogenic differentiation of MG-63 cells compared with AME, as indicated by increased mineralization; alkaline phosphatase activity; and mRNA expression of osteogenic marker genes encoding integrin-binding sialoprotein (IBSP), RUNX2, OSTERIX, and osteocalcin (OCN). Interestingly, AME and CME contained different combinations of osteogenesis-related growth factors, including basic fibroblast growth factor (bFGF), transforming growth factor beta-1 (TGFβ-1), and epidermal growth factor (EGF), which differentially regulated the osteogenic differentiation of MG-63 cells. bFGF and TGFβ-1 present in CME positively regulated the osteogenic differentiation of MG-63 cells, whereas EGF present in AME negatively regulated the differentiation of MG-63 cells. Moreover, exogenous treatment of EGF antagonized CME-induced mineralization of extracellular matrix on MG-63 cells. We compared the osteogenic efficacy of CME with that of BMP2, bFGF, and TGFβ-1 alone or their combinations. We observed that CME greatly enhanced osteogenesis by providing a conductive environment for the differentiation of MG-63 cells. Together, our results indicated that human AME and CME exerted differential effects on osteogenesis because of the presence of different compositions of growth factors. In addition, our results highlighted a new possible strategy of using CME as a biocompatible therapeutic material for bone regeneration.

Preparation, characterization, cellular response and in vivo osseointegration of polyetheretherketone/nano-hydroxyapatite/carbon fiber ternary biocomposite

As FDA-approved implantable material, polyetheretherketone (PEEK) is becoming a prime candidate to replace traditional surgical metallic implants made of titanium (Ti) and its alloys, since it has a lower elastic modulus than Ti. The bioinertness and defective osteointegration of PEEK, however, limit its clinical adoption as load-bearing dental/orthopedic material. The present work aimed at developing a PEEK bioactive ternary composite, polyetheretherketone/nano-hydroxyapatite/carbon fiber (PEEK/n-HA/CF), and evaluating it as a potential bone-repairing material by assessment of growth and differentiation of osteoblast-like MG63 cells and by estimation of osteointegration in vivo. Our results indicated that the adhesion, proliferation and osteogenic differentiation of cells, as well as the mechanical properties were greatly promoted for the PEEK/n-HA/CF biocomposite compared with pure PEEK matrix. More importantly, the ternary composite implant boosted in vivo bioactivity and osseointegration in canine tooth defect model. Thus, the PEEK/n-HA/CF ternary biocomposite with enhanced mechanics and biological performances hold great potential as bioactive implant material in dental and orthopedic applications.

In vitro effect of mineralized and demineralized bone allografts on proliferation and differentiation of MG-63 osteoblast-like cells.

Due to the extensive use of bone allografts in bone reconstruction and periodontal therapy as suitable alternatives to autografts, they are now marketed under different commercial brands. Considering the controversial reports regarding the osteoinductive properties of bone allografts, this study sought to assess the effect of type (mineralized/demineralized), amount and particle size of several allografts on the proliferation and differentiation of MG-63 osteoblast-like cells. MG-63 cells (24-h culture) were exposed to 20 and 40 mg amounts of nine different commercially available freeze-dried bone allografts. After 24 and 72 h of incubation, the effect of water-soluble allograft released materials on cell viability and proliferation was assessed using methyl thiazol tetrazolium (MTT) assay after 24 and 72 h of exposure. Cell differentiation and mineralization was assessed by real-time quantitative reverse transcription PCR and alizarin red staining after 72 h of exposure. The amount and particle size of understudy allografts had significant effects on cell viability after 24 h of exposure (in contrast to 72 h). Higher rate of proliferation was seen in non-differentiated or slow-differentiated groups. The amount and particle size factors had no significant effect on the amount of calcified nodules or the expression of osteogenic marker genes in most groups. Faster and more distinct differentiation and mineralization was noted in mineralized compared to demineralized groups during the 3-day study period. Based on the results, the understudy mineralized (non-demineralized) bone allografts had greater effect on osteogenic differentiation of the MG-63 cells and showed more in vitro osteoinductive activity compared to partially demineralized and fully demineralized types.

Effect of Conditioned Medium from Preameloblasts on Regenerative Cellular Differentiation of the Immature Teeth with Necrotic Pulp and Apical Periodontitis

IntroductionThe purpose of this study was to investigate the effect of conditioned medium (CM) from murine preameloblasts on the cellular differentiation of mesenchymal stem cells (MSCs) in immature teeth with necrotic pulp and apical periodontitis. MethodsPulp necrosis and apical periodontitis were induced in 30 immature permanent double-rooted premolars of 3 beagles and were randomly assigned to the following treatment groups: group CM (n = 10), revascularization treatment was performed using CM from preameloblasts of C57BL/6 mice apical bud cells; group CR (n = 10), conventional revascularization treatment was performed; positive control group (n = 5), left infected; and negative control group (n = 5), untreated. The dogs were followed up for 12 weeks and assessed for treatment outcomes with radiographic and histologic analyses. The effect of the CM on sequential Runx2 and osterix messenger RNA gene expression during the differentiation of MG63 osteoblastlike cells was analyzed with real-time polymerase chain reaction. ResultsThe overall treatment outcomes were not significantly different between the 2 treatment groups. However, the teeth in the CM group showed significantly more mature apices and a higher degree of hard tissue formation with projections intercalating into the pre-existing root dentin (P < .05). In CM-treated teeth, regenerated pulplike tissue was more frequently observed (P < .05). During differentiation, the CM induced early peak expression of Runx2 followed by sustained osterix overexpression. ConclusionsCM from preameloblasts rendered a favorable effect in providing a physiologic microenvironment for the differentiation of MSCs after revascularization treatment.

Preliminary research on a novel bioactive silicon doped calcium phosphate coating on AZ31 magnesium alloy via electrodeposition

A silicon doped calcium phosphate coating was obtained successfully on AZ31 alloy substrate via pulse electrodeposition. A novel dual-layer structure was observed with a porous lamellar-like and outer block-like apatite layer. In vitro immersion tests were adopted in simulated body fluid within 28days of immersion. Slow degradation rate obtained from weight loss was observed for the Si-doped Ca–P coating, which was also consistent with the results of electrochemical experiments showing an enhanced corrosion resistance for the coating. Further formation of an apatite-like layer on the surface after immersion proved better integrity and biomineralization performance of the coating. Biological characterization was carried out for viability, proliferation and differentiation of MG63 osteoblast-like cells. The coating showed a good cell growth and an enhanced cell proliferation. Moreover, an increased activity of osteogenic marker ALP was found. All the results demonstrated that the Si-doped calcium phosphate was perspective to be used as a coating for magnesium alloy implants to control the degradation rate and enhance the bioactivity, which would facilitate the rapidity of bone tissue repair.

The Effects of Different Wavelength UV Photofunctionalization on Micro-Arc Oxidized Titanium

Many challenges exist in improving early osseointegration, one of the most critical factors in the long-term clinical success of dental implants. Recently, ultraviolet (UV) light-mediated photofunctionalization of titanium as a new potential surface treatment has aroused great interest. This study examines the bioactivity of titanium surfaces treated with UV light of different wavelengths and the underlying associated mechanism. Micro-arc oxidation (MAO) titanium samples were pretreated with UVA light (peak wavelength of 360 nm) or UVC light (peak wavelength of 250 nm) for up to 24 h. UVC treatment promoted the attachment, spread, proliferation and differentiation of MG-63 osteoblast-like cells on the titanium surface, as well as the capacity for apatite formation in simulated body fluid (SBF). These biological influences were not observed after UVA treatment, apart from a weaker effect on apatite formation. The enhanced bioactivity was substantially correlated with the amount of Ti-OH groups, which play an important role in improving the hydrophilicity, along with the removal of hydrocarbons on the titanium surface. Our results showed that both UVA and UVC irradiation altered the chemical properties of the titanium surface without sacrificing its excellent physical characteristics, suggesting that this technology has extensive potential applications and merits further investigation.

MG63 osteoblast-like cells exhibit different behavior when grown on electrospun collagen matrix versus electrospun gelatin matrix.

Electrospinning is a simple and efficient method of fabricating a non-woven polymeric nanofiber matrix. However, using fluorinated alcohols as a solvent for the electrospinning of proteins often results in protein denaturation. TEM and circular dichroism analysis indicated a massive loss of triple-helical collagen from an electrospun collagen (EC) matrix, and the random coils were similar to those found in gelatin. Nevertheless, from mechanical testing we found the Young's modulus and ultimate tensile stresses of EC matrices were significantly higher than electrospun gelatin (EG) matrices because matrix stiffness can affect many cell behaviors such as cell adhesion, proliferation and differentiation. We hypothesize that the difference of matrix stiffness between EC and EG will affect intracellular signaling through the mechano-transducers Rho kinase (ROCK) and focal adhesion kinase (FAK) and subsequently regulates the osteogenic phenotype of MG63 osteoblast-like cells. From the results, we found there was no significant difference between the EC and EG matrices with respect to either cell attachment or proliferation rate. However, the gene expression levels of OPN, type I collagen, ALP, and OCN were significantly higher in MG63 osteoblast-like cells grown on the EC than in those grown on the EG. In addition, the phosphorylation levels of Y397-FAK, ERK1/2, BSP, and OPN proteins, as well as ALP activity, were also higher on the EC than on the EG. We further inhibited ROCK activation with Y27632 during differentiation to investigate its effects on matrix-mediated osteogenic differentiation. Results showed the extent of mineralization was decreased with inhibition after induction. Moreover, there is no significant difference between EC and EG. From the results of the protein levels of phosphorylated Y397-FAK, ERK1/2, BSP and OPN, ALP activity and mineral deposition, we speculate that the mechanism that influences the osteogenic differentiation of MG63 osteoblast-like cells on EC and EG is matrix stiffness and via ROCK-FAK-ERK1/2.

Calcium ion release and osteoblastic behavior of gelatin/beta-tricalcium phosphate composite nanofibers fabricated by electrospinning

Gelatin/β-TCP composite nanofibers were fabricated by incorporated different content of β-TCP nanoparticles (0, 5, 10, and 20wt.%) into electrospun gelatin nanofibers. The morphology and chemical structure of the composite nanofibers were characterized by SEM, TEM, XRD, and TGA techniques. Especially, calcium ion release behaviors from the composite nanofibers were investigated in the cell culture medium and correlated to the osteoblastic behavior of MG-63 cells. The results demonstrated that the adhesion, spreading, proliferation and the early osteogenic differentiation of osteoblast-like MG-63 cells on the composite nanofibers depended positively on the content of incorporated β-TCP nanoparticles and their dissolution behavior in the medium thereof.

The role of phospholipase D in osteoblast response to titanium surface microstructure

Biomaterial surface properties such as microtopography and energy can change cellular responses at the cell-implant interface. Phospholipase D (PLD) is required for the differentiation of osteoblast-like MG63 cells on machined and grit-blasted titanium surfaces. Here, we determined if PLD is also required on microstructured/high-energy substrates and the mechanism involved. shRNAs for human PLD1 and PLD2 were used to silence MG63 cells. Wild-type and PLD1 or PLD1/2 silenced cells were cultured on smooth-pretreatment surfaces (PT); grit-blasted, acid-etched surfaces (SLA); and SLA surfaces modified to have higher surface energy (modSLA). PLD was inhibited with ethanol or activated with 24,25-dihydroxyvitamin-D(3) [24R,25(OH)(2)D(3)]. As surface roughness/energy increased, PLD mRNA and activity increased, cell number decreased, osteocalcin and osteoprotegerin increased, and protein kinase C (PKC) and alkaline phosphatase specific activities increased. Ethanol inhibited PLD and reduced surface effects on these parameters. There was no effect on these parameters after knockdown of PLD1, but PLD1/2 double knockdown had effects comparableto PLD inhibition. 24R,25(OH)(2)D(3) increased PLD activity and the production of osteocalcin and osteoprotegerin, but decreased cell number on the rough/high-energy surfaces. These results confirm that surface roughness/energy-induced PLD activity is required for osteoblast differentiation and that PLD2 is the main isoform involved in this pathway. PLD is activated by 24R,25(OH)(2)D(3) in a surface-dependent manner and inhibition of PLD reduces the effects of surface microstructure/energy on PKC, suggesting that PLD mediates the stimulatory effect of microstructured/high-energy surfaces via PKC-dependent signaling.

Influences of ionic dissolution products of dicalcium silicate coating on osteoblastic proliferation, differentiation and gene expression

This work aims to explore the influence of the ionic products of dicalcium silicate coating on osteoblastic proliferation and differentiation, as well as on the expression of BMP2 and its signal transducers Smad1, 6 and 7 in MG-63 osteoblast-like cells. Plasma-sprayed dicalcium silicate coatings were soaked in DMEM to obtain culture media containing the ionic dissolution products of dicalcium silicate coating (Ca 2SiO 4–DMEM). MG63 osteoblast-like cells were cultured in Ca 2SiO 4–DMEM (experimental group) for 3–12 days, while those cultured in normal DMEM served as control (control group). MTT assay was used to evaluate cell viability and proliferation. Alkaline phosphatase activity (ALP), osteocalcin (OC) and type I collagen (COLI) were investigated as differentiation markers. Gene expression of BMP2 and Smad1, 6, 7 was also detected. BMP2 protein was examined by ELISA assay. Alizarin Red-S (AR-S) assay was used to detect mineralization. The results demonstrated that Si concentration in Ca 2SiO 4–DMEM is markedly higher than that in normal DMEM. Compared to the control group, MG63 cells of the experimental group exhibited upregulated proliferation on day 3, and markedly upregulated gene expression of the differentiation markers, especially on days 9 and 12 for OC and on days 3, 6 and 9 for ALP. Gene expression of BMP2 and Smad1, as well as BMP2 protein secreted into culture media, was also upregulated in the experimental group, while gene expression of Smad6 and 7 was not influenced. AR-S assay indicated a higher calcium mineral content deposition in cells of the experimental group. In conclusion, the ionic products of plasma-sprayed dicalcium silicate coating are beneficial to the proliferation and differentiation of MG63 osteoblast-like cells.

In Vitro and in vivo Behaviour of Biodegradable and Injectable PLA/PGA Copolymers Related to Different Matrices

This study comparatively investigates the in vitro and in vivo behavior of injectable polymeric materials for the treatment of bone defects. The tested materials were three injectable and biodegradable PLA/PGA 50/50 copolymers dispersed in different matrices: Fisograft-gel (GEL) was dispersed in an aqueous matrix of poly-ethyl-glycole (PEG); Slurry2 (SL2) was dispersed in an aqueous matrix of PEG and dextran; and Slurry6 (SL6) was dispersed in a 3% agarose matrix. The biological characterization of these materials was studied by in vitro and in vivo tests: the in vitro test assessed the cellular response in terms of viability, differentiation and synthetic activity, while the in vivo test evaluated the healing capacity of bone defects treated with these biomaterials. GEL and SL2 induced a similar response for viability and differentiation of MG63 osteoblast-like cells after a 7-day culture, while SL6 caused a higher production of both interleukin-6 and type I collagen. Since the results showed that the materials were biocompatible and not cytotoxic in vitro, the in vivo study was carried out: materials were implanted, under general anesthesia, in critical size defects of rabbit femoral condyles; after 4 and 12 weeks, the healing rates and the quality of the regenerated bone were histomorphometrically calculated. The SL2-treated defects healed better at 12 weeks with a more similar microarchitecture of the newly formed bone to normal bone in comparison with other materials, as demonstrated by bone volume fraction and trabecular thickness values.

Glucosamine sulfate promotes osteoblastic differentiation of MG-63 cells via anti-inflammatory effect

Glucosamine sulfate (SGlc) has been known to be effective in controlling osteoarthritis (OA) symptoms in several clinical studies. However, the mechanisms of this positive effect of SGlc in human OA still remain elusive. Therefore, first, the effects of SGlc on the differentiation of osteoblast-like MG-63 cells were investigated. Our results demonstrate that SGlc can increase ALP activity, collagen synthesis, osteocalcin secretion, and mineralization in osteoblastic cells in vitro. Furthermore, it was observed that SGlc exhibited anti-inflammatory effect on production of TNF-α, IL-1β, and PGE 2 in macrophage, RAW264.7 cells. In conclusion, these results suggest that SGlc can promote cell differentiation in cultured MG-63 osteoblast cells via anti-inflammatory effect.