Diazonium Ion Research Articles

Role of Metabolic Enzymes P450 (CYP) on Activating Procarcinogen and their Polymorphisms on the Risk of Cancers.

Cytochrome P450 (CYP450) enzymes are the most important metabolizing enzyme family exists among all organs. Apart from their role in the deactivation of most endogenous compounds and xenobiotics, they also mediate most procarcinogens oxidation to ultimate carcinogens. There are several modes of CYP450s activation of procarcinogens. 1) Formation of epoxide and diol-epoxides intermediates, such as CYP1A1 and CYP1B1 mediates PAHs oxidation to epoxide intermediates; 2) Formation of diazonium ions, such as CYP2A6, CYP2A13 and CYP2E1 mediates activation of most nitrosamines to unstable metabolites, which can rearrange to give diazonium ions. 3) Formation of reactive semiquinones and quinines, such as CYP1A1 and CYP1B1 transformation of estradiol to catechol estrogens, subsequently formation semiquinones; 4) Formation of toxic O-esterification, such as CYP1A1 and CYP1A2 metabolizes PhIP to N(2)-acetoxy-PhIP and N(2)-sulfonyloxy-PhIP, which are carcinogenic metabolites. 5) Formation of free radical, such as CYP2E1 is involved in activation tetrachloromethane to free radicals. While for CYP2B6 and CYP2D6, only a minor role has been found in procarcinogens activation. In addition, as the gene polymorphisms reflected, the polymorphisms of CYP1A1 (-3801T/C and -4889A/G), CYP1A2 (- 163C/A and -2467T/delT), CYP1B1 (-48G/C, -119G/T and -432G/C), CYP2E1 (-1293G/C and -1053 C/T) have been associated with an increased risk of lung cancer. The polymorphisms CYP1A1 (-3801T/C and -4889A/G), and CYP2E1 (PstI/Rsa and 9-bp insertion) have an association with higher risk colon cancers, whereas CYP1A2 (-163C/A and -3860G/A) polymorphism is found to be among the protective factors. The polymorphisms CYP1A1 (-3801T/C and -4889A/G), CYP1B1 -432G/C, CYP2B6 (-516G/T and -785A/G) may increase the risk of breast cancer. In conclusion, CYP1A1, CYP1A2, CYP1B1, CYP2A6, and CYP2E1 are responsible for most of the procarcinogens activation, and their gene polymorphisms are associated with the risk of cancers.

Base-Induced Radical Carboamination of Nonactivated Alkenes with Aryldiazonium Salts.

A new transition-metal-free version of the Meerwein arylation has been developed. The key feature of this carboamination-type reaction is the slow base-controlled generation of aryl radicals from aryldiazonium tetrafluoroborates, so that a sufficient quantity of diazonium ions remains to enable efficient trapping of the alkyl radical adduct resulting from aryl radical addition to the alkene. Under strongly basic conditions, diazoanhydrides are likely to take over the role of the nitrogen-centered radical scavengers.

Facile Fabrication of a Sensor with a Bifunctional Interface for Logic Analysis of the New Delhi Metallo-β-Lactamase (NDM)-Coding Gene

Surface functionalization has attracted considerable interest from researchers because of its capability for facilitating the interface communication between an energy transducer and a biological system. We report newly synthesized N-(4-aminobenzoyl)-N′-(4-maleimidobenzoyl)-1,2-ethylenediamine (AME) to promote the modification of the surface with thiolated DNA and 3-((4-aminophenyl)dimethylammonio)propane-1-sulfonate (APSB) for the facile formation of a bifunctional interface forming an antifouling surface. Through the formation of diazonium ion, electrochemically reductive deposition of the two arylamines can fabricate simultaneously and effectively a bifunctional surface on a gold electrode and install a DNA probe to form a sensor; the sensor was applied to detect three genetic fragments of the New Delhi Metallo-β-Lactamase (NDM)-coding gene. Effects of the diazotization and the conditions of electrochemical deposition upon the sensing signals were investigated in connection with enumerating the accessible maleimide groups and assessing the diffusion resistance of the electroactive indicator. The detection limit given by the diazonium-constructed system was improved to attain the level of 54 pM, an advance over a conventional self-assembled monolayer.

Multifunctional Carbon for Electrochemical Double‐Layer Capacitors

Multifunctional carbon materials are prepared for application as an active electrode material in an electrochemical capacitor displaying both charge storage and binder properties. The synthesis of the materials involves the functionalization of high surface area Black Pearls 2000 carbon black by a covalent attachment of polyacrylic acid. The polyacrylic acid polymer is formed by atom transfer radical polymerization using 1‐(bromoethyl)benzene groups initially bonded to the carbon by spontaneous grafting from the corresponding diazonium ions. The grafting of 1‐(bromoethyl)benzene and polyacrylic acid is confirmed by thermogravimetric analysis, Fourier transform infrared spectroscopy, energy‐dispersive X‐ray spectroscopy, and nitrogen gas adsorption isotherm. The composite electrode films prepared from the modified carbon are more hydrophilic and have better wettability in an aqueous electrolyte than the one prepared with the unmodified carbon. The modified electrodes also show a higher specific capacitance (≈140 F g−1), a wider working potential window (1.5 V) and excellent specific capacitance retention upon cycling (99.9% after 5000 cycles) in an aqueous 0.65 m K2SO4 electrolyte. Moreover, a relatively high specific capacitance (≈90 F g−1) is maintained at a scan rate of 1000 mV s−1 with the polyacrylic‐acid‐modified carbon electrode.

The Synthesis, X‐ray Structure Analysis, and Photophysical Characterization of 4‐[(E)‐2‐(4‐Carboxyphenyl)diazenyl]‐morpholine

4‐[(E)‐2‐(4‐Carboxyphenyl)diazenyl]‐morpholine (1) was prepared in 33% yield from a coupling reaction between morpholine and the diazonium ion formed from 4‐aminobenzoic acid. X‐ray structural analysis of 1 yielded two important insights into its structure: the geometry of the N―N double bond and the partial delocalization across the linear triazene moiety. The absorption spectra of 1 in dilute acetonitrile and 2‐methyltetrahydrofuran solutions both featured an intense (ε ≈ 20,000 M−1cm−1) band centered at 320–324 nm that was assigned as a mixture of π → π* and n → π* transitions. Emission was observed at 383 and 379 nm from dilute acetonitrile and 2‐methyltetrahydrofuran solutions of 1, respectively, with the latter being red‐shifted to 439 nm at 77 K. Emission lifetime data for compound 1 provided evidence that the emission was a mixture of two excited state transitions.

Utility of Nitrogen Extrusion of Azido Complexes for the Synthesis of Nitriles, Benzoxazoles, and Benzisoxazoles.

The utility of the nitrogen extrusion reaction of azido complexes, generated in situ from the corresponding aldehydes or ketones with TMSN3 in the presence of ZrCl4 or TfOH, has been described. These azido complexes could undergo three different pathways, depending on the substrates. First, azido methanolate complexes or imine diazonium ions could lead to benzisoxazole products via an intramolecular nucleophilic substitution. Second, imine diazonium ions could also undergo either the elimination of proton to provide nitrile products in good to excellent yields or an aryl migration, followed by an intramolecular nucleophilic addition, to give benzoxazole products in good yields.

Increasing the Affinity Between Carbon-Coated LiFePO4/C Electrodes and Conventional Organic Electrolyte by Spontaneous Grafting of a Benzene-Trifluoromethylsulfonimide Moiety.

The grafting of benzene-trifluoromethylsulfonimide groups on LiFePO4/C was achieved by spontaneous reduction of in situ generated diazonium ions of the corresponding 4-amino-benzene-trifluoromethylsulfonimide. The diazotization of 4-amino-benzene-trifluoromethylsulfonimide was a slow process that required a high concentration of precursors to promote the spontaneous grafting reaction. Contact angle measurements showed a hydrophilic surface was produced after the reaction that is consistent with grafting of benzene-trifluoromethylsulfonimide groups. Elemental analysis data revealed a 2.1 wt % loading of grafted molecules on the LiFePO4/C powder. Chemical oxidation of the cathode material during the grafting reaction was detected by X-ray diffraction and quantified by inductively coupled plasma atomic emission spectrometry. Surface modification improves the wettability of the cathode material, and better discharge capacities were obtained for modified electrodes at high C-rate. In addition, electrochemical impedance spectroscopy showed the resistance of the modified cathode was lower than that of the bare LiFePO4/C film electrode. Moreover, the modified cathode displayed superior capacity retention after 200 cycles of charge/discharge at 1 C.

Ascorbic Acid Promoted Metal-Free Synthesis of Aryl Sulfides with Anilines Nitrosated in Situ by tert-Butyl Nitrite

A mild, metal-free synthesis of aryl sulfides has been disclosed. Aryl diazonium ion was generated by the in situ nitrosation of aniline, and it was reduced by ascorbic acid (vitamin C) to form aryl radical, which underwent a thiolation with disulfide to yield aryl sulfide. The reaction proceeded smoothly without heating or irradiation. This strategy was also expanded to the synthesis of aryl selenides.

A Geomimetic Approach to the Formation and Identification of Fossil Sterane Biomarkers in Crude Oil: 18-nor-D-homo-Androstane and 5α,14β-Androstane.

A diazonium ion derived from 18-aminoandrostane rearranged upon decomposition by a carbonium and a carbenium ion to furnish a mixture of a cyclopropanated compound and two D-homo-androstenes. Hydrogenation of this mixture gave the saturated hydrocarbons, 18-nor-D-homo-androstane and 5α,14β-androstane, which are both fossil sterane biomarkers in Neoproterozoic crude oil. The so far unknown constitution and configuration as well as the geochemical genesis were established by this experiment. The starting material for this investigation, 18-aminoandrostane, was prepared in twelve steps from androstan-17-one (12.5% overall yield) with a Barton reaction as the key step.

Amine-terminated monolayers on carbon: preparation, characterization, and coupling reactions.

Aminophenyl and aminomethylphenyl monolayers have been electrografted to glassy carbon and pyrolyzed photoresist film from the corresponding diazonium ions using a protection-deprotection strategy based on Boc (tert-butyloxycarbonyl) and Fmoc (fluorenylmethyloxycarbonyl) groups. After grafting and then deprotecting films of Boc-NH-Ar, Fmoc-NH-Ar, and Fmoc-NH-CH2-Ar, depth profiling by atomic force microscopy confirmed that the resulting amine-terminated films were monolayers. In contrast, after deprotection, Boc-NH-CH2-Ar gave a multilayer film. Electroactive carboxylic acid derivatives were coupled to the monolayers through amide linkages. Electrochemical measurements revealed that the deprotected Fmoc-NH-CH2-Ar monolayer gave the highest surface concentration of coupled nitrophenyl and ferrocenyl groups and DFT calculations established that this monolayer has the highest theoretical surface concentration of those examined.

Reaction of arylium ions with the collision gas N2 in electrospray ionization mass spectrometry.

The tandem mass spectra of many compounds contained peaks which could not have arisen from the precursor ion. Such peaks were found to be due to reaction of arylium ions with N2 in the collision cell. Therefore, this reaction was studied in detail with representative compounds. Various classes of compounds were dissolved in acetonitrile/water/formic acid and studied by electrospray ionization mass spectrometry to record their MS(2) and pseudo-MS(3) spectra in a QqQ mass spectrometer and their accurate m/z values in an Orbitrap Elite instrument. Arylium ions were found to react with N2 in the collision cell. The reaction was confirmed by pseudo-MS(3) studies, by comparison with authentic diazonium ions, and by the pressure dependence of the product ion survival yield. Reactions of arylium ions with N2 were observed with p-toluenesulfonic acid, o-toluenesulfonamide, phenylphosphonic acid, phenol, aniline, aminonaphthalenes, benzoic acid, benzophenone, and other compounds. By using a QqQ mass spectrometer, we observed that the protonated compounds produce arylium ions, which then react with N2 to form diazonium ions. The diazonium ion was produced with N2 but not with Ar in the collision cell, and its abundance increased with increasing N2 pressure. Arylium ions generated from a wide variety of compounds in electrospray ionization tandem mass spectrometry may react with N2 to form diazonium ions. The abundance of the diazonium ions is affected by collision energy and N2 pressure. This reaction should be considered when annotating peaks in MS/MS libraries. Published in 2015. This article is a U.S. Government work and is in the public domain in the USA.

Electrochemical characterization of glassy carbon electrode modified with 1,10-phenanthroline groups by two pathways: reduction of the corresponding diazonium ions and reduction of phenanthroline

ABSTRACT The electrochemical behaviour of 1,10-phenanthroline molecules immobilized on a glassy carbon electrode surface by electrochemical reduction of the corresponding in-situ generated diazonium ions in an aqueous solution was investigated. Firstly, the derivatization of glassy carbon electrode was confirmed by the presence of the barrier effect in the solution of a redox probe. Secondly, atomic force microscopy measurements revealed the deposition of thin (

Halogenation of β-estradiol by a rationally designed mesoporous biocatalyst based on chloroperoxidase

AbstractChloroperoxidase from Caldariomyces fumago was immobilized in Eupergit® C, a commercial mesoporous acrylic-based material. Due to low stability of the enzyme under neutral and basic pH, the usual covalent immobilization procedures cannot be applied to this enzyme. Several strategies were followed in order to achieve a stable interaction between the protein and the support. The support was efficiently functionalized with different reactive groups such as aromatic and aliphatic amines, glutaraldehyde, diazonium ions, and maleimide moieties; solvent-exposed amino acid residues in chloroperoxidase were identified or created through chemical modification, so that they were reactive under conditions where the enzyme is stable. Enzyme load and retained activity were monitored, obtaining biocatalysts with specific activity ranging from 200 to 25,000 U/g. The highest load and activity was obtained from the immobilization of a chemically-modified CPO preparation bearing a solvent-exposed free thiol group. This biocatalyst efficiently catalyzed the transformation of β-estradiol, an endocrine disruptor.

Chemically grafted carbon-coated LiFePO4 using diazonium chemistry

The effect of surface functionalization of aminophenyl and bromophenyl groups on carbon-coated LiFePO4 and the electrochemical properties of composite electrode containing these materials are reported. The functionalization was performed by spontaneous reduction of the corresponding in situ generated diazonium ions. The resulting chemically grafted LiFePO4/C materials were characterized by energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) to confirm the presence of the surface organic species. XRD analyses indicated the cathode material was partially oxidized. Thermogravimetric and elemental analyses revealed the loading of grafted molecules was between 0.2 and 1.1 wt.% depending on the reaction conditions. Interestingly, the electrochemical performances of the modified LiFePO4/C are not adversely affected by the presence of either aminophenyl and bromophenyl groups at the carbon surface, and in fact the grafted LiFePO4/C displayed slightly superior discharge capacity at the highest C rate investigated for a low loading of organic molecules.

Functionalization of LiFePO4/C by Spontaneous Reduction of In-situ Generated Bromobenzene Diazonium Ions in Organic Media

ABSTRACTBromophenyl moieties were attached to the carbon-coated LiFePO4 (LiFePO4/C) surface by spontaneous reduction of in-situ generated 4-bromobenzene diazonium ions in organic media. The presence of the surface organic species on the grafted LiFePO4/C powders was confirmed by X-ray photoelectron spectroscopy. Thermogravimetric analyses revealed a low loading (lower than 1 wt. %) of grafted molecules. The electrochemical characterization of the LiFePO4/C cathodes showed that a low loading of bromophenyl groups at the LiFePO4/C surface can enhance the rate of Li+ extraction, presumably due to the decrease of the LiFePO4/C agglomerate size and an increase of the wettability of the electrode. On the other hand, poor performances were obtained using the grafted cathode material with the highest loading of bromophenyl moieties.

General approach for electrochemical functionalization of glassy carbon surface by in situ generation of diazonium ion under acidic and non-acidic condition with a cascade protocol

Immobilization of catechol derivatives on GC electrode surfaces can be performed by in situ generation and reduction of nitrocatechol. We present the oxidative nitration of catechol in the presence of nitrous acid followed by electrochemically reduction of the generated nitro aromatic group to the corresponding amine group and its conversion to diazonium cation at the electrode surface to yield a surface covalently modified with catechol. In this manner, some derivatives of catechol can be immobilized on the electrode surface. Whole of the process is carried out in Triethylammonium acetate ionic liquid as an inert and neutral medium (pH∼7.0). Surface coverage can be easily controlled by the applied potential, time and concentration of catechol. After modification, the electrochemical features of modified surface have been studied. Also modified GC electrode exhibited remarkable catalytic activity in the oxidation of NADH. The catalytic currents were proportional to the concentration of NADH over the range 0.01-0.80mM. This condition can be used for modification of GC surfaces by various aromatic molecules for different application such as design of sensors and biosensors.

Aminosulfonylation of aromatic amines, sulfur dioxide and hydrazines.

A facile route to aryl N-aminosulfonamides under mild conditions is provided. The reaction of aromatic amines (including heteroaromatic amines), sulfur dioxide, and hydrazines proceeds efficiently with good functional group tolerance. The in situ generated diazonium ion is involved in the aminosulfonylation process.

Covalently anchored carboxyphenyl monolayer via aryldiazonium ion grafting: a well-defined reactive tether layer for on-surface chemistry.

Electrografting of aryl films to electrode surfaces from diazonium ion solutions is a widely used method for preparation of modified electrodes. In the absence of deliberate measures to limit film growth, the usual film structure is a loosely packed multilayer. For some applications, monolayer films are advantageous; our interest is in preparing well-defined monolayers of reactive tethers for further on-surface chemistry. Here, we describe the synthesis of an aryl diazonium salt with a protected carboxylic acid substituent. After electrografting to glassy carbon electrodes and subsequent deprotection, the layer is reacted with amine derivatives. Electrochemistry and atomic force microscopy are used to monitor the grafting, deprotection, and subsequent coupling steps. Attempts to follow the same procedures on gold surfaces suggest that the grafted layer is not stable in these reaction conditions.

4-Fluoro-3-nitrophenyl grafted gold electrode based platform for label free electrochemical detection of interleukin-2 protein

A new platform based on 4-Fluoro-3-nitrophenyl (FNP) grafted gold disk electrode prepared via electrochemical reduction of 4-fluoro-3-nitrobenzene diazonium ion has been developed and utilized for biosensor fabrication. Anti-interleukin-2 (anti-IL2) antibody has been covalently immobilized onto FNP/Au surface and utilized for label free electrochemical impedance based detection of cytokine IL2. FNP acts as a bridge (cross-linker) between gold surface and anti-IL2, where fluoro group of FNP undergoes nucleophilic substitution by amino group of biomolecule and results in its covalent immobilization. The immobilization process and fabricated electrode have been characterized using contact angle (CA) measurements, cyclic voltammetry (CV) and electrochemical impedance (EIS) technique. CV studies show that FNP grafted surface provides conductive surface for anti-IL2 immobilization. The EIS response of studies as a function of IL2 concentrations exhibits a detection in linear range from 1pgml−1 to 10ngml−1 with minimum detectable concentration of 1pgml−1. The electrode has been found to be selective against other cytokine molecules.

Facile synthesis of 3-aryloxindoles via brønsted acid catalyzed Friedel-Crafts alkylation of electron-rich arenes with 3-diazooxindoles.

A simple metal-free method for the synthesis of 3-aryloxindoles via Brønsted acid catalyzed aromatic C-H functionalization of electron-rich arenes with 3-diazooxindoles is developed. In the presence of a catalytic amount of TfOH, a series of 3-aryloxindoles are synthesized as single regioisomers in good to excellent yields. This transformation is proposed to proceed through acid-catalyzed protonation of 3-diazooxindoles into diazonium ions followed by Friedel-Crafts-type alkylation of arenes.