Sludge Dewatering Research Articles

Excess secondary sludge reuse by H2O2 thermal dehydration

The excess of activated sludge generated in municipal wastewater treatment plants constitutes one of the challenging problems facing modern society. The high-water content of this waste makes difficult the transport, disposal, and management of these solids. In this work, activated sludge excess from a secondary clarifier has been dehydrated by means of a combination of temperature and hydrogen peroxide treatment. Three main operating variables have been considered to affect sludge dewaterability and filterability. Temperature (120–180 °C), hydrogen peroxide dose (0.01–0.03 M), and treatment time (20–60 min) influence have been assessed by completing a 15-run Box Behnken experimental design. Different output variables (water content, resistance to filtration, sedimentation volumetric index, extracellular polymeric substances, etc.) have been monitored. Generally, temperature seems to be the most influencing parameter to obtain a dehydrated sludge with acceptable management/disposal characteristics (sludge volume reduction and filterability). In line with the concept of circular economy, an attempt has been conducted to obtain a sustainable biosorbent from the dehydrated sludge generated in the previous stage. Optimum conditions of carbonization and activation revealed that the solid obtained at 400 °C by using ammonium nitrate as activation agent was the most efficient absorbent to eliminate some model compounds from water (namely, phenol, ofloxacin, and diuron); however, a clear improvement margin in the synthesis is foreseen.

In-situ generation of iron activated percarbonate for sustainable sludge dewatering

Effective dewatering of sewage sludge could potentially address the issues of high energy consumption and large carbon footprint inherent in the sludge treatment process, advancing toward carbon neutrality in environmental remediation. Yet, the surface hydrophilic characteristics and water-holding interfacial affinity in sludge led to dwindled sludge-water separation performance. Here, the integration of in-situ generation of iron from zero-valent scrap iron (ZVSI) and sodium percarbonate (SPC) was attempted to attenuate the water-retaining interfacial affinity within sludge, thus achieving superior sludge dewatering performance. Results showed that under the optimal conditions, the ZVSI + SPC system led to a remarkable decline of 76.09 % in the specific resistance to filtration of the sludge, accompanied by a notable decline of 34.96 % in the water content. Moreover, the utilization of ZVSI + SPC system could be a viable alternative to the traditional strategies in terms of enhanced sludge dewaterability, offering application potential with stable operating performance, economic feasibility, and reduced carbon emissions. Investigation into dewatering mechanism revealed that ZVSI could maintain the Fe3+/Fe2+ in a stable dynamic cycle and continuously in-situ generate Fe2+, thereby efficaciously fostering the SPC activation for the ceaseless yield of reactive oxygen species. The predominant •OH and 1O2 efficiently decomposed the hydrophilic biopolymers, therefore minimizing the hydrophilic protein secondary structures, along with the hydrogen and disulfide bonds within proteins. Subsequently, the water-holding interfacial affinity was profoundly diminished, leading to intensified hydrophobicity, self-flocculation, and dewaterability. These findings have important implications for the advancement of efficacious ZVSI + SPC conditioning techniques toward sustainable energy and low-carbon prospects.

Chemical conditioning of aerobically digested sludge using polyelectrolytes with different charge densities

This research was carried out to evaluate the effects of different dosages (1.85–4.44 g kg−1 Ts−1) of three cationic polyelectrolytes with charge densities (CD) of 20%, 40%, and 60% on the dewatering properties of an aerobically digested sludge. The sludge was collected from the sludge processing line in a wastewater treatment plant in the city of Mashhad, Iran (MWWTP). To assess the sludge dewatering properties, parameters such as specific resistance to filtration, sludge cluster geometry, filtration rate, and filtrate turbidity and volume were measured. The experimental results were then compared with the effects of a reference polyelectrolyte that was used in the conditioning of the sludge in that treatment plant. The results indicated that the sludge samples treated with the polyelectrolyte of the highest CD matched better dewatering performance than the samples conditioned with the other two polyelectrolytes. This polyelectrolyte (60%CD) presented its best effects at the dosage of 4.07 g kg−1 Ts−1. With this dosage, its performance was similar to the performance of the reference polyelectrolyte at the dosage of 4.44 g kg−1 Ts−1.

Stabilization of PFAS-contaminated soil with sewage sludge- and wood-based biochar sorbents

Sustainable and effective remediation technologies for the treatment of soil contaminated with per- and polyfluoroalkyl substances (PFAS) are greatly needed. This study investigated the effects of waste-based biochars on the leaching of PFAS from a sandy soil with a low total organic carbon content (TOC) of 0.57 ± 0.04 % impacted by PFAS from aqueous film forming foam (AFFF) dispersed at a former fire-fighting facility. Six different biochars (pyrolyzed at 700–900 °C) were tested, made from clean wood chips (CWC), waste timber (WT), activated waste timber (aWT), two digested sewage sludges (DSS-1 and DSS-2) and de-watered raw sewage sludge (DWSS). Up-flow column percolation tests (15 days and 16 pore volume replacements) with 1 % biochar indicated that the dominant congener in the soil, perfluorooctane sulphonic acid (PFOS) was retained best by the aWT biochar with a 99.9 % reduction in the leachate concentration, followed by sludge-based DWSS (98.9 %) and DSS-2 and DSS-1 (97.8 % and 91.6 %, respectively). The non-activated wood-based biochars (CWC and WT) on the other hand, reduced leaching by <42.4 %. Extrapolating this to field conditions, 90 % leaching of PFOS would occur after 15 y for unamended soil, and after 1200 y and 12,000 y, respectively, for soil amended with 1 % DWSS-amended and aWT biochar. The high effectiveness of aWT and the three sludge-based biochars in reducing PFAS leaching from the soil was attributed largely to high porosity in a pore size range (>1.5 nm) that can accommodate the large PFAS molecules (>1.02–2.20 nm) combined with a high affinity to the biochar matrix. Other factors like anionic exchange capacity could play a contributing role. Sorbent effectiveness was better for long-chain than for short-chain PFAS, due to weaker, apolar interactions between the biochar and the latter's shorter hydrophobic CF2-tails. The findings were the first to demonstrate that locally sourced activated wood-waste biochars and non-activated sewage sludge biochars could be suitable sorbents for the ex situ stabilization and in situ remediation of PFAS-contaminated soil, bringing this technology one step closer to full-scale field testing.

Assisting role of carbonaceous skeleton in sludge thermal hydrolysis and press filtration

As a key step in disposal and reutilization, sludge dewatering is very difficult, since extracellular polymers substances (EPS) binds the water, and compressible organic matter deforms and causes water filtration channels to collapse. Sludge dewaterability was demonstrated to enhance by carbonaceous skeleton (CSkel)-assisted thermal hydrolysis in our previously study. This work further investigated the assisting role of different types of CSkel in EPS decomposition during sludge thermal hydrolysis stage and channels reformation during press filtration stage. Two major types of CSkel, lignocellulosic waste (waste sawdust, waste straw, processing by-product) and protein-rich waste (shrimp shells, jatropha oil cake), were selected. The experimental results showed that in the thermal hydrolysis stage, the decomposition of lignocellulosic waste would increase fatty acids production by 28%, resulting in an acidic environment that reduced the total amount of three hydrophilic amino acids, i.e., glycine, serine and threonine. These promoted the release of water from the sludge. In the press filtration stage, average pore size of sludge was reduced by approximately 87% and nanoscale holes began to appear and increase. Assisting of CSkel rebuilt the filtration channels which brought good connectivity between the pores in sludge cake. Lignocellulosic waste proved significantly more effective than protein-rich waste in achieving a water removal rate of 88.63% under 1 MPa. This study provided a basis for selecting suitable CSkel to optimize sludge dewatering for subsequent utilization.

Ultrahigh pressure filtration dewatering of municipal sludge conditioned by steel slag in combination with Fe2+/ sodium persulfate

Municipal sludge treatment in urban contexts faces significant challenges, especially when dealing with sludge characterized by exceptionally high water content and organic content. This study investigates the application of sodium persulfate oxidation activated by ferrous ions (Fe2+/SPS) in conjunction with waste steel slag as a conditioning agent for municipal sludge, capillary suction time and specific resistance filtration experiments were conducted on conditioned sewage sludge, along with dewatering tests under ultrahigh pressure conditions. Additionally, to investigate the potential underlying mechanisms, Scanning Electron Microscopy analysis, Zeta potential measurements, and comprehensive sample analyses were performed. The research reveals substantial improvements in sludge dewatering performance when steel slag is combined with Fe2+/SPS treatment. This combined treatment introduces additional ferrous ions into the sludge, generating radicals that disrupt the structure of extracellular polymeric substances and cells within the sludge. Steel slag also acts as a skeleton builder material, creating larger drainage pathways within the sludge cake under ultrahigh pressure, enhancing permeability, and accelerating moisture release. This combined treatment method holds promise for achieving deep sludge dewatering, under ultrahigh filtration pressure, with water content reduced to below 40%. The study not only highlights the advantages of using steel slag in combination with Fe2+/SPS treatment for sludge dewatering but also provides insights into the underlying mechanisms. This comprehensive treatment method reduces the excessive use of ferrous ions and costs while significantly enhancing dewatering performance, offering a promising solution for municipal sludge treatment and management.

The novel application of polyoxometalates for achieving sludge deep dewatering using low-temperature thermal hydrolysis pretreatment

Traditional thermal hydrolysis pretreatment (THP) for sludge deep dewatering is energy-intensive and poses the risk of generating bio-toxic substances that affect downstream wastewater treatment processes. To address these challenges, this study introduces the novel application of polyoxometalates (POMs) in THP to achieve sludge deep dewatering at lower temperatures. Specifically, under the optimal conditions with a POMs dosage of 1.0 mM/g VSS and a THP temperature of 140 °C, a reduction of 30.36%, 88.31%, and 55.04% in WC, SRF, and CST, respectively, was achieved compared to 20-RS-THP. Further analysis revealed that both the acidity and the biological effect of POMs played the dominant role in enhancing sludge dewatering. Spectroscopic techniques and molecular simulations revealed changes in protein structure during THP induced the POMs-proteins interaction. Results revealed that at lower THP temperatures (<80 °C), POMs induced protonation of functional groups in amino acid residues, strengthening electrostatic interactions. As temperatures increased (80–140 °C), more binding sites in hydrophilic amino acid residues became available for hydrogen bonding with POMs. This interaction led to structural changes in proteins, facilitating water liberation and the formation of sludge colloidal aggregates with improved drainage channels. However, at higher temperatures (140–180 °C), the exposure of hydrophobic sites, the loss of hydrophilic amino acids, and the occurrence of the Maillard reaction in proteins partially offset POMs' binding effects. Moreover, the development of magnetized POMs-based materials may offer sustainability and economic benefits for POMs-based sludge treatment and disposal technologies.

Application and Parameter Optimization of Electro-Kinetic Geosynthetics Electrodes Based on the Wild Horse Optimizer in Horizontal Electric Field Sludge Dewatering

This study systematically compared the performance of five corrosion-resistant electrode materials for electro-dewatering. Through a comprehensive analysis of dewatering efficiency, energy consumption, and corrosion resistance, conductive plastic composite electrodes (EKG) were selected as the optimal electrode material for experimentation. Additionally, the impact of electric field strength and electrode spacing on the efficiency and energy consumption of electro-dewatering (EDW) was investigated. The results showed that the increase in electric field intensity could improve the solid content and dewatering efficiency of the sediments, but the corresponding energy consumption also increased. The increased spacing of the plates reduced the dehydration effect and increased the energy consumption. By employing the Wild Horse Optimization algorithm, empirical and multifactorial response models for the dewatering solidification process were established, aimed at predicting the dewatering performance and energy consumption. The study concludes that for the remediation of heavy metals, the electric field strength should not exceed 10 V/cm to avoid excessive heavy metal migration and potential adverse chemical reactions.

Effect of electrolytic zero-valent iron activated sodium hypochlorite on sludge dewatering performance.

Using electrolytic zero-valent iron-activated sodium hypochlorite (EZVI-NaClO) to pretreat sludge, the capillary suction time (CST) was utilized to evaluate sludge dewaterability. Ammonia nitrogen (NH4-N), dissolved phosphorus, and total phosphorus in the supernatant were used to analyze sludge disintegration. This approach aimed to evaluate the effectiveness of the pretreatment process and its impact on the sludge composition. The migration and transformation of extracellular polymeric substances (EPS), including dissolved EPS (S-EPS), loosely boundEPS, and tightly bound-EPS (TB-EPS), were analyzed by detecting protein and polysaccharide concentrations and three-dimensional fluorescence excitation-emission spectroscopy (3D-EEM). The sludge particle properties, including sludge viscosity and particle size, were also analyzed. The results suggested that the optimal pH value, NaClO dosage, current, and reaction time were 2, 100 mg/gDS (dry sludge), 0.2A, and 30 min, respectively, with a CST reduction of 43%. Protein and polysaccharide contents in TB-EPS were significantly reduced in the EZVI-NaClO group. Conversely, protein and polysaccharides contents in S-EPS increased, suggesting that EZVI-NaClO treatment could disrupt the EPS. Besides, the viscosity of the treated sludge decreased from 195.4 to 54.9 mPa·S, indicating that sludge fluidity became better. ZEVI-NaClO could enhance sludge dewaterability by destructing protein and polysaccharide structure and improving sludge hydrophobicity.

Characterization and Performance of Sludge Derived Biochar as Conditioner in Textile Wastewater Sludge Dewatering

Characterization and Performance of Sludge Derived Biochar as Conditioner in Textile Wastewater Sludge Dewatering

Cucumeropsis mannii and Luffa acutangula Seed Proteins Analysis as a Novel Plant-Based Bio-coagulant: Fecal Sludge Treatment and Dewatering

Cucumeropsis mannii and Luffa acutangula Seed Proteins Analysis as a Novel Plant-Based Bio-coagulant: Fecal Sludge Treatment and Dewatering

Potential Pollution of Liquid Waste from the Agro-Industry to Rivers in the Area Around Tanjung Api-Api

Due to its high regional significance, Tanjung Api-api, currently the mainstay of South Sumatra Province, serves as a focal point for agro-industrial development programs. This research aims to identify the potential for liquid waste pollution in rivers from agro-industries around Tanjung Api-api. This research was carried out through four stages: (a) collecting physical data on land, forests, and rivers in the ecosystem conditions around the industrial area of the Tanjung Api-api area. (b) analyzing data on the physical and chemical parameters of the Telang River, (c) analyzing several physical and chemical parameters of Telang River water, (d) obtaining data on the physical and chemical parameters of liquid waste in the influent and effluent of several WWTP agro-industries in the Gasing area that have been operating. Water quality measurements were conducted in the Telang and Gasing rivers. The parameters measured and observed were TSS, pH, BOD, COD, and fatty oil parameters, respectively, once in the afternoon and evening during high and low tide, at three points: downstream, middle, and upstream. The results showed that the physical, organic, and inorganic chemical parameters in the Telang River were still below the BMLC threshold. The quantity and quality of industrial wastewater in Gasing are still below the BMLC standard for each industry but are almost close to the established quality standards. It is recommended to utilize the sludge into something more valuable, considering that the TSS produced from sludge dewatering is relatively high.

Soluble carbon source recovery using preconditioning coagulants for applicable short-term fermentation of waste activated sludge in WWTPs

A huge production of waste activated sludge (WAS) has been a burden for wastewater treatment plants (WWTPs) with high disposal cost and little benefit back to wastewater purification. The short-chain fatty acids (SCFAs) produced by a short-term acidogenic fermentation of WAS before methane production have been proven to be a high-quality carbon source available for microbial denitrification process. The dual purpose of full recovery of fermentation liquid products and facilitating disposal of residual solid waste necessitate an efficient solid-liquid separation process of short-term fermentation liquid. The transformation and loss of various soluble carbon sources between solid and liquid are very important issues for carbon recovery efficiency when combining short-term fermentation and sludge dewatering in WWTPs. Here we testified the three conventional preconditioning coagulants, Polyferric Sulfate (PFS), Poly Aluminum Chloride (PAC) and Polyacrylamide (PAM), to improve the efficiency of subsequent solid-liquid separation. The results show that conversion yield of SCFAs in the liquid phase of sludge after short-term fermentation was 195 mg COD/g VSS, when using the coagulants PFS, PAC, and PAM for recovery, the recovery ratio was 79.5%, 82.0%, and 85.9%, respectively, while the dewaterability could be improved after preconditioning short-term fermentation sludge. The complexation of Al3+/Fe3+ in metal coagulants with carboxyl groups of SCFA demonstrated by Density Functional Theory calculation led to small part of soluble carbons co-migration to the solid phase, mainly a loss of high molecular weight organic compounds (carbohydrate, proteins, humic acids), while the application of PAM had little impact on carbon recovery. Economic calculations further showed PAM preconditioning short-term fermentation liquid of WAS could achieve higher recovery benefits.

The Influence of the Addition of Cement and Zeolite on the Increase in the Efficiency of Sewage Sludge Dewatering in the Pressure Filtration Process

The process of removing water from sewage sludge is particularly important due to its high content in the raw sludge. This translates into problems with the transport and storage of sediments. Additionally, high water content reduces the calorific value of the sludge. The methods for selecting the appropriate parameters for sewage sludge conditioning and filtration, based on the experimental data presented in this work, may allow for the optimization of sludge dewatering lines in small and large sewage treatment plants. The optimization of the dewatering process has a significant impact on the environmental and economic benefits, which consequently results in a decrease in the power costs of the devices used, flocculants, and sludge processing, and, above all, it contributes to the reduction in the negative impact on the environment. The use of mineral substances in the preparation of sewage sludge improves the effects of its dewatering in the pressure filtration process, as expressed in the obtained values of the final hydration and process efficiency. The use of polyelectrolytes alone significantly improves the effects of sewage sludge dewatering. In this work, the polyelectrolytes were supported by the addition of cement or zeolite. The conditioning of sewage sludge in combined methods using C-494 polyelectrolyte and minerals made it possible to reduce the compressibility coefficient to the range of 0.24–0.47 and, at the same time, to achieve the best results of sludge dewatering in the filtration process. The lowest hydration of 74.9% was achieved when polyelectrolyte and cement were added to the sludge, and this hydration was 6.5 percentage points lower compared to that of the non-filtered sludge.

Unveiling the role of pore characteristics in sludge dewatering: Visualization by Nano-CT and micromodel study

The solid-liquid separation is an indispensable and primary link in the process of sludge treatment and disposal. The past research was focused primarily on the technique explorations of sludge dewatering and always disregarded the internal pore structure and water migration behavior in sludge. In this work, the real three-dimensional pore structure of sludge was obtained by Nano-CT. Based on this, a pore-scale heterogeneous sludge micromodel was firstly presented, and the water flooding experiment was carried out to visualize the water migration behavior. The results showed that the sludge structure transformed from sheet-like floc to microsphere particles, and then agglomerated into large globular granules during anaerobic ammonia oxidation. And the equivalent pore size increases from 342 μm to 617 μm, improving the sludge dewaterability characterized by capillary suction time (CST). The most significant implication of this work was revealing the critical role of invalid connected pore in sludge dewatering. Such pore was not contributed to fluid flow but the circulating vortex in it even induced energy dissipation, thus deteriorated the sludge dewaterability. This work may be helpful to understand the critical role of pore characteristic in water migration and shed light on the new dewatering techniques from the perspective of regulating sludge structure.

Effects of chitosan and rice husk powder on thermal hydrolysis-anaerobic digested sludge conditioning: Dewaterability and biogas slurry fertility

To enhance the dewaterability of anaerobic digested sludge and to make full use of the biogas slurry. This study set up five sludge conditioning methods: polymeric ferric sulfate, polymeric aluminum chloride, cationic polyacrylamide, chitosan, and chitosan combined with rice husk powder. Their effects on the dewaterability of thermal hydrolysis-anaerobic digested sludge, bacterial community, and biogas slurry fertility were studied to find a non-toxic and non-risk dewatering technology for the environment and biogas slurry. Compared with that of the control group, moisture content, normalization capillary suction time, and specific resistance to filtration were reduced by 12.8%, 97.7%, and 82.9%, respectively. Chitosan enlarges the sludge flocs and forms complexes with proteins, disrupting the structure of the extracellular polymeric substances, thereby exposing more hydrophobic groups and reducing the hydrophilicity of the sludge. The subsequent addition of rice husk powder enhances the adsorption of hydrophilic substances and provides a stronger drainage channel for the sludge. In addition, the biogas slurry obtained by this conditioning method used as a fertilizer increased the dry weight and fresh weight of corn seedlings by 59.3% and 91.0%, respectively. And the total chlorophyll content increased by 84.6%. Pearson's correlation analysis showed that chitosan and rice husk meal had no toxic effect on the biogas slurry compared to the other three flocculants. The results showed that the combined treatment of chitosan and rice husk powder resulted in the best dewaterability. Overall, chitosan combined with rice husk powder is a green dewatering technology with great potential for anaerobic digested sludge dewatering and biogas slurry recycling.

Effects of microbubble pretreatment on physiochemical and microbial properties of excess activated sludge.

Fast increased amount of excess activated sludge (EAS) from wastewater treatment plants has aroused universal concerns on its environmental risks and demands for appropriate treatments, while effective treatment is dependent upon proper pretreatment. In this study, air-supplied microbubbles (air-MBs) with generated size of 25.18 to 28.25 μm were used for EAS pretreatment. Different durations (30, 60, 90, and 120 s) yielded sludge with varied physiochemical conditions, and 60 s decreased sludge oxidation status and significantly increased adenosine triphosphate (ATP) content. Soluble, loosely-bound, and tightly-bound extracellular polymeric substances (SEPS, LB-EPS, and TB-EPS) were extracted from the sludge through a stepwise approach and examined through three-dimensional excitation-emission matrix (3D-EEM) and quantitative analysis. The results showed that 60- and 120-s treatments generated stronger fluorescence intensities on dissolved organic matters (DOMs) of protein-like and fulvic acid in LB-EPS and TB-EPS, which indicated the decrease of counterparts in EAS, and therefore facilitated sludge dewaterability and reduction. The dominant microbial communities in EAS, including Proteobacteria, Bacteroidota, Chloroflexi, and Actinobacteriota, were not significantly affected by MB pretreatment. The results collectively revealed the effects of MB pretreatment on EAS and indicated that MBs could be an effective pretreatment technique for EAS treatment process.

Modelling sludge dewatering in treatment reed bed considering sludge deposit formation

AbstractThe accumulation of sludge deposits is a crucial factor in the dewatering efficiency of sludge treatment reed bed (STRB). This paper presents an improved one-dimensional process-based mathematical model to simulate the dewatering mechanism in STRBs, in which the compressible cake filtration (CCF) theory was implemented to simulate the sludge deposits accumulation on the surface of the reed bed, while the varying sludge deposit thickness was accounted for using the moving mesh method. The proposed model also included the dual porosity variably saturated flow model and the Penman–Monteith equation to describe the dewatering through gravity drainage and evapotranspiration, respectively. The results from the model were validated with experimental data from laboratory-scale STRBs treating septage. The simulation results showed that considering the sludge deposit layer as a specific flow resistance effectively avoids the overprediction of water infiltration rate in the reed bed. The predicted results showed excellent agreement with the actual data, where only five cases of the root mean square error were above 10% compared to the average effluent flux. Further, the effect of evapotranspiration was found to be insignificant within a short-term simulation. The consideration of the influence of sludge deposit formation on drainage dewatering using the CCF model and moving mesh model has delivered a more robust simulation for sludge dewatering in STRBs, and the proposed model is capable of facilitating the understanding of the interactions between the sludge dewatering in STRB with respect to the bed characteristics, hydraulic load, and solid load.

Ameliorating tannery sludge dewaterability by disintegration of extracellular biopolymers with FeCl3-MnSO4/oxalic acid/sodium percarbonate: Spectroscopic profiling of dissolved organic matter in sludge filtrate

Effectual sludge dewatering techniques are strongly desired by industrial wastewater treatment plants. In this work, we scrutinised the efficacy of various Fenton based complex mediated processes like ferric chloride (FeCl3)/oxalic acid (OA)/sodium percarbonate (SPC) (FOS), FS (without OA), manganese sulphate (MnSO4)/oxalic acid (OA)/sodium percarbonate (SPC) (MOS) and MS (without OA) for which capillary suction time (CST) was attained as follows: MS (204 s) < MOS (180 s) & FS (180 s) < FOS (174 s) at pH 3. This implied the role of chelating agent (OA) in improving sludge dewaterability by disintegrating Extracellular Polymeric Substances (EPS) and releasing converted free water from the sludge flocs. FTIR results of sludge samples revealed the higher release of aromaticity after treatment process. Presence of aromatic carboxylate compounds were confirmed by GC–MS analysis. A detailed inquisition on the dissolved organic matter (DOM) of filtrate samples using 3DEEM fluorescence methods like second derivative Accumulative Fluorescence Emission (AFE), Fluorescence Regional Integration (FRI) and UV–Visible spectroscopic method like multipeak Gaussian fitting were performed that signified Microbial Soluble Products.

Enhancing sludge dewaterability in sequential bioleaching: Degradation of dissolved organic matter (DOM) by filamentous fungus Mucor sp. ZG-3 and the influence of energy source.

This study aimed to enhance sludge dewatering through sequential bioleaching, employing the filamentous fungus Mucor sp. ZG-3 and the iron-oxidizing bacterium Acidithiobacillus ferrooxidans LX5. The mechanism by which Mucor sp. ZG-3 alleviates sludge dissolved organic matter (DOM) inhibition of A. ferrooxidans LX5 was investigated, and the optimal addition of energy source for enhanced sludge dewaterability during sequential bioleaching was determined. Sludge dissolved organic carbon (DOC) decreased to 272 mg/L with a 65.2% reduction by Mucor sp. ZG-3 in 3 days, and the degraded fraction of sludge DOM was mainly low-molecular-weight DOM (L-DOM) which inhibited the oxidization of Fe2+ by A. ferrooxidans LX5. By degrading significant inhibitory low-molecular-weight organic acids, Mucor sp. ZG-3 alleviated DOM inhibition of A. ferrooxidans LX5. In the sequential bioleaching process, the optimal concentration of FeSO4·7H2O for A. ferrooxidans LX5 was 4 g/L, resulting in the minimum specific resistance to filtration (SRF) of 2.60×1011 m/kg, 40.0% lower than that in the conventional bioleaching process with 10 g/L energy source. Moreover, the sequential bioleaching process increased the sludge zeta potential (from -31.8 to -9.47 mV) and median particle size (d50) of the sludge particle (from 17.90 to 27.44 μm), contributing to enhanced sludge dewaterability. Inoculation of Mucor sp. ZG-3 during the bioleaching process reduced the demand for energy sources by A. ferrooxidans LX5 while improving sludge dewaterability performance.