Zinc Dendrites Research Articles

Suppression of Zinc Dendrites by Bamboo-Inspired Additive for Aqueous Zinc Battery

Suppression of Zinc Dendrites by Bamboo-Inspired Additive for Aqueous Zinc Battery

An Ultrahigh-Modulus Hydrogel Electrolyte for Dendrite-Free Zinc Ion Batteries.

Quasi-solid-state aqueous zinc ion batteries suffer from anodic zinc dendrite growth during plating/stripping processes, impeding their commercial application. The inhibition of zinc dendrites by high-modulus electrolytes has been proven to be effective. However, hydrogel electrolytes are difficult to achieve high modulus owing to their inherent high water contents. This work reports a hydrogel electrolyte with ultrahigh modulus that can overcome the growth stress of zinc dendrites through mechanical suppression effect. By combining wet-annealing, solvent-exchange, and salting-out processes and tuning the hydrophobic and crystalline domains, a hydrogel electrolyte is obtained with substantial water content (≈70%), high modulus (198.5MPa), high toughness (274.3MJ m-3), and high zinc-ion conductivity (28.9 mS cm-1), which significantly outperforms the previously reported poly(vinyl alcohol)-based hydrogels. As a result, the hydrogel electrolyte exhibits excellent dendrite-suppression effect and achieves stable performance in Zn||Zn symmetric batteries (1800h of cycle life at 1mA cm-2). Moreover, the Zn||V2O5 pouch batteries display excellent cycling life and operate stably even under extreme conditions, such as large bending angle (180°) and automotive crushing. This work provides a promising approach for designing mechanically reliable hydrogel electrolytes for advanced aqueous zinc ion batteries.

Constructing Dual Schottky Junctions for High‐Performance Zinc Anode

AbstractAqueous zinc ion batteries provide new solutions for achieving environmentally friendly and safe energy storage devices. Unfortunately, the further application is hampered by the growth of zinc dendrites caused by uneven zinc deposition, hydrogen evolution and other side interfacial reactions at the zinc anode. Herein, a multifunctional Bi‐Bi2O3 hybrid artificial interface layer is constructed on the surface of the zinc anode using an in situ conversion reaction. Among them, the Bi‐Bi2O3 Schottky structure not only significantly accelerates the migration of Zn2+ through its built‐in electric field, but also effectively improves the hydrogen evolution barrier (ΔGH*), thereby suppressing side reactions. Moreover, the Schottky contact formed between the interface layer and the metal zinc interface also regulates the electronic distribution state on the zinc surface and optimizes the deposition process of Zn2+, ensuring a more uniform and orderly zinc deposition process. Based on the synergistic effect of dual Schottky junctions, symmetric batteries achieve stable cycling for 2000 h under the conditions of 1.0 mA cm−2 and 1.0 mAh cm−2. The full cell assembled with α‐MnO2 as the cathode maintains capacity of 112.7 mAh g−1 after 1000 cycles at 1 A g−1 with a capacity retention rate of 84%.

Polyethylene Glycol-Protected Zinc Microwall Arrays for Stable Zinc Anodes.

Aqueous zinc-ion batteries promise good commercial application prospects due to their environmental benignity and easy assembly under atmospheric conditions, positioning them as a viable alternative to lithium-ion batteries. However, some inherent issues, such as chaotic zinc dendrite growth and inevitable side reactions, challenge the commercialization progress. In this work, we imprint highly ordered zinc microwall arrays to regulate the electric field toward uniform Zn deposition. Afterward, coating a polyethylene glycol protection layer on the zinc microwalls aims to passivate the surface defects that rise unintentionally by mechanical imprinting. Polyethylene glycol can also boost oriented Zn deposition along the (002) plane and inhibit hydrogen gas production, further enhancing the stability of such three-dimensional (3D) hybrid anodes. Compared to the messy electric field near the polyethylene glycol-protected Zn foil, the uniform electric field provided by these 3D hybrid anodes can regulate the Zn deposition behaviors, enabling a longer lifespan and thus certifying the necessity of adding 3D microstructures. Additionally, 3D microstructures can offer a larger surface area than that of the planar Zn foil, providing more reaction sites and higher specific capacity. In this case, the 3D hybrid electrode exhibits a good initial capacity of approximately 120 mA h/g at a current density of 5 A/g and a nice retention of more than 80% after 800 cycles. The proposed scheme paves the way for a long-term stable 3D zinc anode solution with promising application prospects.

Simultaneous Modulation on Solvation Shell and Electrode Interface for Reversible Zinc Anode Realized by a Mutiplefunctional Additive

AbstractThe inferior reversibility of Zn metal anode caused by undesired Zn dendrite and severe interfacial side reactions has to be addressed for the commercial application of Zinc ion batteries (ZIBs). Here, a multiple functional sodium benzaldehyde 2,4‐disulfonate(B24DADS) additives with various blocks of polar sulfonate group, Lewis basic aldehyde groups, and hydrophobic benzene ring is proposed to regulate the solvation structure of Zn2+, construct an H2O‐poor and zincophilic dual electric layer structure, and create a passive SEI on the Zn anode surface, thus restaining dendrite growth and interfacial side reactions. Furthermore, uniform deposition mechanics of the Zn are revealed by the synergistic effect of induced deposition, additive‐derived SEI formation, and texture regulation. In addition, Na+ can also limit the growth of zinc dendrites based on electrostatic shielding mechanisms. Therefore, the multifunctional B24DADS additive grants the anode to deliver remarkable electrochemical performance. Under critical test conditions (20 mA cm−2/20 mAh cm−2), the zinc provides superior long cycling (3700 h) with a low polarization voltage (0.02 V). B24DADS containing electrolyte is well matched with manganese dioxide cathode. This effort renders a promising way to explore advanced additives with unique molecular structures for addressing zinc dendrite growth and rampant side effects.

Dendrite‐Free Zinc Anode for Zinc‐Based Batteries by Pre‐Deposition of a Cu–Zn Alloy Layer on Copper Surface via an In Situ Electrochemical Oxidation–Reduction Reaction

ABSTRACTThe prevention of uncontrollable growth of zinc dendrites on the zinc electrodes is one of the key challenges, hindering the widespread commercialization of zinc‐based energy storage technologies. Herein, we report a facile method to mitigate dendrite growth on a copper surface by an initial in situ coating of a Cu–Zn alloy layer, before zinc deposition. During further zinc deposition, the initially formed Cu–Zn alloy layer provides uniform nucleating sites and promotes homogeneous zinc deposition. A symmetrical cell, assembled using a Cu–Zn/Cu electrode could be stably cycled for over 1000 cycles in ZnSO4 solution, at a current density of 30 mA/cm2 and a coulombic efficiency of 99.9%. A zinc–air cell, assembled using Zn@Cu–Zn/Cu as the anode and rGO/Co3O4 composite as the cathode, exhibited a very stable performance at a high current density of 50 mA/cm2 and coulombic efficiency of ~93%, for over 400 cycles. After cycling experiments, the X‐ray photoelectron spectroscopy and the X‐ray diffraction analysis confirmed the formation of the Cu–Zn alloy layer. Hence, the present method provides an easy route for fabricating a dendrite‐free zinc electrode, for a wide range of zinc anode‐based batteries.

"Anchoring Capture" Effect Mimicking Proline in Hardy Deep-Sea Fish to Stabilize the Zinc Anode with Lower Operating Temperature.

The low plating/stripping efficiency of zinc anodes, dendrite growth, and high freezing points of aqueous solutions hinder the practical application of aqueous zinc-ion batteries. This paper proposes a zwitterionic permeable network solid-state electrolyte based on the "anchor-capture" effect to address these problems by incorporating proline (Pro, a biological antifreeze agent) into the electrolyte. Extensive validation tests, Quantum Chemistry (QC) calculations, Molecular Dynamics (MD) Simulations, and ab initio molecular dynamics simulations consistently indicate that the amino groups in proline adsorb onto the Zn metal surface, stabilizing the zinc anode-electrolyte interface, suppressing side reactions from water decomposition, and homogenizing zinc-ion flux. This electrolyte demonstrates excellent reversibility in Zn-Mn2O3 cells and Zn-Zn half-cells, achieving a high coulombic efficiency of over 99.4% across 2000 cycles in Zn-Mn2O3 full cells, and delivering a discharge-specific capacity of 175.2 mAhg-1 at -35°C and 1 Ag-1. Additionally, an appropriate concentration of proline lowers the electrolyte's freezing point to -45°C through the network's solid-state effect, ensuring the stable operation of the solid-state battery at -35°C. This innovative concept of network solid-state electrolytes injects new vitality into the development of multifunctional solid-state electrolytes.

Biomineralization Inspired the Construction of Dense Spherical Stacks for Dendrite-Free Zinc Anodes.

Aqueous zinc-ion batteries (AZIBs) are considered to be one of the most promising energy storage systems due to their high degree of safety and low cost. However, the deposition of the uncontrolled zinc dendritic morphology on the surface of the Zn anode seriously reduces the cycle life of AZIBs. Herein, inspired by natural biomineralization, a uniform spherical zinc deposition is achieved via the addition of a biological macromolecule to the electrolyte. The proposed biological macromolecule makes Zn2+ undergo dense spherical deposition by regulating the relative growth rate of high-index planes of metal zinc, effectively avoiding the destruction from irregular zinc dendrites. The symmetric cell with the addition of such a biological macromolecule can be stably cycled for >3200 h at 1 mA cm-2 for 1 mAh cm-2. This work sheds light on expanding morphological regulation of metal deposition to spherical shapes for stable metal anodes in addition to a single-crystal plane control strategy.

Electrode/Electrolyte Optimization-Induced Double-Layered Architecture for High-Performance Aqueous Zinc-(Dual) Halogen Batteries

HighlightsA double-layered protective film based on zinc-based coordination compound and ZnF2-rich solid electrolyte interphase layer has been successfully fabricated on the zinc metal anode via electrode/electrolyte synergistic optimization.The double-layered architecture can effectively modulate Zn2+ flux and suppress the zinc dendrite growth, thus facilitating the uniform zinc deposition.The as-developed zinc-(dual) halogen batteries based on double-layered protective film can present high areal capacity and satisfactory cycling stability.

Achieving Stable Orientational Zinc Deposition for Reversible Zinc Anode through Supramolecular Anchoring Mechanism.

Aqueous zinc-ion batteries have been impeded by the hydrogen evolution reaction (HER), uncontrolled zinc dendrites, and side reactions on the Zn anode. In this work, a Zn-polyphenol supramolecular network is rationally designed for stabilizing Zn anodes (ZPN@Zn) even at high current density. Theoretical calculations and experiments show that the zinc-polyphenol supramolecular layer effectively inhibits the hydrogen evolution reaction by capturing water molecules through strong hydrogen bonding networks while also facilitating the rapid replenishment of Zn2+ ions at the interface through supramolecular anchoring. Additionally, it results in preferential deposition of Zn on the (002) plane, thereby contributing to nondendritic and highly reversible Zn plating/stripping behaviors even under high rates. Concomitantly, the ZPN@Zn achieves superior stability of nearly 1200 h at a high current density of 20 mA cm-2 and maintains a high CE efficiency of 99.86% after 3000 cycles at 1 mAh cm-2 and 5 mA cm-2. Remarkably, the full cell assembled with ZPN@Zn and NaV3O8 (NVO) endures 25 000 cycles at 20 A g-1, achieving an impressive performance for the realization of dendrite-free Zn anodes by supramolecular modulation.

Electrostatic Shielding Engineering for Stable Zn Metal Anodes

AbstractAqueous Zn‐ion batteries (AZIBs) are promising energy storage systems due to their low cost, excellent safety, and environmental friendliness. However, challenges like uncontrollable dendrite growth and side reactions during battery operation limit their commercialization. Addressing these issues requires regulating ion deposition behavior at the anode/electrolyte interface. The electrostatic shielding effect, which leverages the interplay between electric potential and ionic motion, provides a unique mechanism to inhibit zinc dendrites and side reactions effectively. Despite significant progress in understanding electrostatic shielding in AZIBs, a comprehensive summary of its effects is still lacking. This paper first reviews the primary challenges in AZIBs and then describes how the electrostatic shielding effect can optimize their performance. Existing strategies for achieving electrostatic shielding through anode structure optimization and electrolyte optimization‐are classified and analyzed. Finally, the review summarizes current electrostatic shielding strategies for stabilizing zinc anodes, identifies existing challenges, and discusses the future potential, and for this approach in AZIBs.

Breath inspired multifunctional low-cost inorganic colloidal electrolyte for stable zinc metal anode

The practical application of aqueous zinc-ion batteries (AZIBs) is primarily constrained by issues such as corrosion, zinc dendrite formation, and the hydrogen evolution reaction occurring at the zinc metal anode. To overcome these challenges, strategies for optimizing the electrolyte are crucial for enhancing the stability of the zinc anode. Inspired by the role of hemoglobin in blood cells, which facilitates oxygen transport during human respiration, an innovative inorganic colloidal electrolyte has been developed: calcium silicate-ZnSO4 (denoted as CS-ZSO). This electrolyte operates in weak acidic environment and releases calcium ions, which participate in homotopic substitution with zinc ions, while the solvation environment of hydrated zinc ions in the electrolyte is regulated. The reduced energy barrier for the transfer of zinc ions and the energy barrier for the desolvation of hydrated ions imply faster ion transfer kinetics and accelerated desolvation processes, thus favoring the mass transfer process. Furthermore, the silicate colloidal particles act as lubricants, improving the transfer of zinc ions. Together, these factors contribute to the more uniform concentration of zinc ions at the electrode/electrolyte interface, effectively inhibiting zinc dendrite formation and reducing by-product accumulation. The Zn//CS-ZSO//Zn symmetric cell demonstrates stable operation for over 5000 h at 1 mA cm−2, representing 29-fold improvement compared to the Zn//ZSO//Zn symmetric cell, which lasts only 170 h. Additionally, the Zn//CS-ZSO//Cu asymmetric cell shows stable average Coulombic efficiency (CE) exceeding 99.6% over 2400 cycles, significantly surpassing the performance of the ZSO electrolyte. This modification strategy for electrolytes not only addresses key limitations associated with zinc anodes but also provides valuable insights into stabilizing anodes for the advancement of high-performance aqueous zinc-ion energy storage systems.

Regulating the Zn electrode/electrolyte interface with lactose additive for high performance Zn anode

The practical utilization of rechargeable aqueous zinc metal batteries (AZMBs) has been constrained by the formation of zinc dendrites and other associated issues. This article introduces lactose, a compound rich in hydroxyl groups, as an electrolyte additive into the aqueous solution of the electrolyte with the objective of suppressing the harmful growth of zinc dendrites. The lactose additive, with its strong zincophilicity, robust intermolecular hydrogen bonding, and a large number of exposed high electronegativity hydroxyl groups, enables lactose to effectively modulate the electrode/electrolyte interface in a dynamic manner, thereby achieving the stability and reversibility of the zinc anode. The findings presented in this work demonstrate the uniform deposition and stripping of zinc in a 2 M ZnSO4 electrolyte with the addition of lactose, thereby enhancing the cycling performance of Zn||Zn batteries. The alteration of the zinc ion environment on the surface of the zinc electrode, in conjunction with the dynamic modulation of the Gouy-Chapman-Stern (GCS) layer by lactose, increases the nucleation overpotential, thereby facilitating to a uniform deposition morphology in lieu of the formation of large-scale dendrites. Furthermore, the formation of hydrogen bonds serves to prevent the occurrence of side reactions. These factors act in concert to enhance the electrochemical performance of AZMBs. The addition of lactose to the electrolyte has resulted in a significant enhancement in the Coulombic efficiency of the card-type Zn||Cu asymmetric battery, reaching 99.7 %. The biodegradability of lactose and the sustainability of its source make this research conducive to the development of environmentally friendly battery electrolyte additives.

High-Entropy Multiple-Anion Aqueous Electrolytes for Long-Life Zn-Metal Anodes.

Aqueous zinc-ion batteries (AZIBs) hold great promise for large-scale energy storage applications, however, their practical use is significantly hindered by issues such as zinc dendrite growth and hydrogen evolution. To address these challenges, we propose a high-entropy (HE) electrolyte design strategy that incorporates multiple zinc salts, aimed at enhancing ion kinetics and improving the electrochemical stability of the electrolyte. The interactions between multiple anions and Zn2+ increase the complexity of the solvation structure, resulting in smaller ion clusters while maintaining weakly anion-rich solvation structures. This leads to improved ion mobility and the formation of robust interphase layers on the electrode-electrolyte interface. Moreover, the HE electrolyte effectively suppresses hydrogen evolution and corrosion side reactions while facilitating uniform and reversible Zn plating/stripping processes. Impressively, the optimized electrolyte enables dendrite-free Zn plating/stripping for over 3000 h in symmetric cells and achieves a high Coulombic efficiency of 99.5% at 10 mA cm-2 in asymmetric cells. Inspiringly, full cells paired with Ca-VO2 cathodes demonstrate excellent performance, retaining 81.5% of the initial capacity over 1800 cycles at 5 A g-1. These significant findings highlight the potential of this electrolyte design strategy to improve the performance and lifespan of Zn-metal anodes in AZIBs.

Preparation of Hierarchical Porous ZIF-67 and Its Application in Zinc Battery Separator

This study successfully prepared a hierarchically porous ZIF-67 (H-ZIF-67) by incorporating the polyvinylpyrrolidone (PVP) at room temperature. Compared to standard control ZIF-67 (C-ZIF-67) with a yield of 81% and a BET specific surface area of 1228 m2·g−1, the H-ZIF-67 not only exhibited improved crystallinity and pore structure but also achieved a yield of up to 93% and a BET specific surface area of 1457 m2·g−1. Due to its hierarchically porous structure, H-ZIF-67 demonstrated excellent adsorption capacity and efficiency for methylene orange (MO). Additionally, the composite separator created by combining H-ZIF-67 with nanocellulose (CNF) exhibited remarkable uniformity and dispersion in zinc batteries. In comparison to a conventional CNF separator, the porous structure and high specific surface area of H-ZIF-67 significantly enhanced its electrolyte wettability and Zn2+ transport rates. Its abundant Lewis acid sites effectively promoted the uniform deposition of Zn2+, thereby suppressing the formation of zinc dendrites and improving the cycling and safety performance of zinc-ion batteries. Experimental results indicate that the ion conductivity of the membrane was 4.31 mS·cm−1, the electrolyte absorption rate was 316%, and it could cycle stable for over 4000 h at a current density of 1 mA·cm−2 with a discharge capacity of 1 mAh·cm−2. This achievement will open up new avenues for the preparation and application of ZIF-67 composite separators in aqueous zinc-ion batteries.

Multidentate Chelating Ligands Enable High-Performance Zinc-Bromine Flow Batteries.

Zinc bromine flow battery (ZBFB) is a promising battery technology for stationary energy storage. However, challenges specific to zinc anodes must be resolved, including zinc dendritic growth, hydrogen evolution reaction, and the occurrence of "dead zinc". Traditional additives suppress side reactions and zinc dendrite formation by altering the solvation structure of Zn2+ and adsorbing onto the zinc surface through only a limited number of zincophilic sites, resulting in weak adsorption on zinc metal and potential inability to simultaneously optimize the solvation structure of zinc ions. Obviously, increasing the number of potential zincophilic sites in the additive can significantly enhance the interaction with zinc. Herein, we propose a strong chelate, ethylenediamine tetramethylene phosphonic acid (EDTMPA) as the additive, which boasts six potent zincophilic sites, not only promotes the formation of the water-deficient inner Helmholtz plane but also plays a crucial role in restructuring the solvation environment of Zn2+. As a result, the zinc symmetric flow battery with EDTMPA exhibited exceptional coulombic efficiency of 99.4% over 800 cycles, surpassing the previous studies by a significant margin. Furthermore, the assembled ZBFB has showcased a dendrite-free and enduring cycling over 400 cycles at 80 mA cm-2.

Multidentate Chelating Ligands Enable High‐Performance Zinc‐Bromine Flow Batteries

Zinc bromine flow battery (ZBFB) is a promising battery technology for stationary energy storage. However, challenges specific to zinc anodes must be resolved, including zinc dendritic growth, hydrogen evolution reaction, and the occurrence of "dead zinc". Traditional additives suppress side reactions and zinc dendrite formation by altering the solvation structure of Zn2+ and adsorbing onto the zinc surface through only a limited number of zincophilic sites, resulting in weak adsorption on zinc metal and potential inability to simultaneously optimize the solvation structure of zinc ions. Obviously, increasing the number of potential zincophilic sites in the additive can significantly enhance the interaction with zinc. Herein, we propose a strong chelate, ethylenediamine tetramethylene phosphonic acid (EDTMPA) as the additive, which boasts six potent zincophilic sites, not only promotes the formation of the water‐deficient inner Helmholtz plane but also plays a crucial role in restructuring the solvation environment of Zn2+. As a result, the zinc symmetric flow battery with EDTMPA exhibited exceptional coulombic efficiency of 99.4% over 800 cycles, surpassing the previous studies by a significant margin. Furthermore, the assembled ZBFB has showcased a dendrite‐free and enduring cycling over 400 cycles at 80 mA cm−2.

The analysis of the overall failure of practical Zn−Ni battery

Zn−Ni batteries are viewed as promising power sources for electric tools and electric vehicles (EVs) due to their benefits of high safety, high working voltage and attractive rate performance. However, the practical applications of the Zn−Ni batteries are hampered by poor cycling performance, posing significant challenges for their widespread utilization. To effectively address this pressing concern, a profound investigation of the intrinsic failure mechanisms underlying Zn−Ni batteries holds paramount importance. This paper carries out a thorough analysis of battery behavior to simulate industrial application scenarios using two different assembly methods of Zn−Ni batteries. One type is a battery composed of one Ni(OH)2 cathode and one Zn anode (abbreviated as OO). The other type is the battery assembled with one Ni(OH)2 cathode and two Zn anodes (abbreviated as OT). Ultimately, it is revealed that the principal factors of Zn anode failure in OO battery are the growth of zinc dendrites, passivation and uneven current distribution. In contrast, for OT battery, the cathode emerges as the failed electrode. Specifically, the rupture of spheres on the positive electrode surface and the detached powder from the substrate result in the decline in capacity and finally the failure of the battery. Two classical battery assembly methodologies were employed to investigate in-depth the failure mechanisms of Zn−Ni batteries, ultimately revealing that the reasons for battery failure mechanism differed, thus providing valuable and practical guidance for future research aimed at enhancing battery lifespan.

Stabilizing zinc anodes by a solvation sheath modification with toluenesulfonate additive

As an advanced electrochemical energy storage device, aqueous zinc-ion batteries offer high theoretical capacity and energy density, employing water-based electrolytes to reduce fire and explosion risks. However, zinc tends to form dendrites during charge-discharge processes, leading to reduced electrode surface area and shortened cycling lifespan. In this study, we propose the use of a commonly used and cost-effective additive, sodium p-toluenesulfonate (OTM), to stabilize zinc anodes. Experimental and theoretical simulations demonstrate that OTM can enter the solvation sheath of Zn2+, reduce the activity of nearby H2O molecules, facilitate uniform Zn2+ deposition, and suppress zinc dendrite formation. Therefore, Zn//Zn symmetric batteries utilizing ZnSO4 (ZSO) electrolytes containing OTM achieved outstanding long-term performance exceeding 1700 h at 1 mA cm−2, significantly surpassing those employing ZSO electrolytes. Additionally, Zn//VO2 full batteries with OTM additives exhibited enhanced cycling stability and an initial discharge capacity of 180 mAh g−1 at 3 A g−1, demonstrating its superior application potential.

High-Conductivity and Ultrastretchable Self-Healing Hydrogels for Flexible Zinc-Ion Batteries.

Aqueous zinc-ion batteries are promising candidates for flexible energy storage devices due to their safety, economic efficiency, and environmental friendliness. However, the uncontrollable dendrite growth and side reactions at the zinc anode hinder their commercial application. Herein, we designed and synthesized a dual network self-healing hydrogel electrolyte with zwitterionic groups (PAM-PAAS-QCS), which can be used for the large deformations of flexible devices due to its excellent stretchability (ε = 5100%). The incorporation of zwitterionic groups into the PAM-PAAS-QCS hydrogel electrolyte endows it with high ionic conductivity (33.61 mS/cm), a wide electrochemical stability window, and the ability to suppress zinc dendrite formation and side reactions. Besides, the Zn//Zn symmetric cell with PAM-PAAS-QCS can stably plate and strip zinc for 1500 h at 0.5 mA/cm2, and the Zn//Polyaniline full cell retains 82.4% of its capacity after 1500 cycles at 1 A/g. Additionally, flexible batteries based on both the original and self-healed PAM-PAAS-QCS hydrogel electrolytes demonstrate good cycling stability and stable charge-discharge performance under various bending conditions. This self-healing hydrogel electrolyte with excellent stretchability and high ionic conductivity is expected to pave the way for the development of high-performance flexible energy storage and wearable devices.