Delivery Of Bone Morphogenetic Protein-2 Research Articles

Characterization of recombinant human bone morphogenetic protein-2 delivery from injectable hyaluronan-based hydrogels by means of125I-radiolabelling

This study presents a thorough in vitro and in vivo characterization of the delivery of bone morphogenetic protein 2 (BMP-2) from a hyaluronan-based hydrogel system. The in vitro release of BMP-2 from similar hydrogels has previously been studied by enzyme-linked immunosorbent assay (ELISA), by which only a fraction of the loaded protein is detected. In the current study, (125) I radiolabelling was used instead to monitor BMP-2 in vitro and in vivo. To minimize protein loss during handling, (125) I-BMP-2 adsorption to different tubes was studied at different times and temperatures. The data showed that Protein LoBind tubes exhibited the lowest protein affinity. Furthermore, a biphasic release profile of biologically active BMP-2 was observed both in vitro and in vivo, with the initial fast phase during the first week, followed by a slower release during the remaining 3 weeks. The initial fast-release phase corresponded to the early bone formation observed after 8 days in an ectopic model in rats. Bone volume and mineral content increased until day 14, after which a decrease in bone volume was observed, possibly due to resorption in response to decreased amounts of released BMP-2. Overall, the results suggested that cautious protein handling and a reliable quantification technique are essential factors for successful design of a BMP-2 delivery system.

Regenerative repair of bone defects with osteoinductive hydroxyapatite fabricated to match the defect and implanted with combined use of computer-aided design, computer-aided manufacturing, and computer-assisted surgery systems: a feasibility study in a canine model

BackgroundCurrently, regenerative repair of large bone defects that result from bone tumor resection or severe trauma is a challenging issue because of the limited regenerative potential of bone and treatment modalities. The aim of this study was to achieve repair of large bone defects to the original three-dimensional (3D) anatomical state by combining computer-aided technologies and local delivery of bone morphogenetic protein (BMP) in a canine model. MethodsComputed tomography (CT) images of the pelvic bone of each dog were obtained, and an imaginary spherical malignant bone tumor of 15-mm diameter was placed in the left ilium of a canine on the 3D CT image. Resection of the whole tumor with a 10-mm margin of healthy bone was planned preoperatively by using computer-aided design (CAD) software. In addition, an image of the implant to be used to fill the resulting bone defect was constructed on the computer image. A porous hydroxyapatite (HA) implant identical to the imaged bone defect was made by shaving a tetragonal porous apatite block (40 × 20 × 10mm) with a computer-aided manufacturing system operated by using the CT-image data of the bone defect obtained from the CAD system. To resect the iliac bone as planned preoperatively on the 3D CT image, computer-aided surgery was performed using the CT data. The defect was filled with the HA implant fabricated as described and coated with a putty carrier either with BMP-2 (BMP group, n = 6) or without BMP-2 (control group, n = 6). ResultsIn the BMP group, new bone formation was noted around each implant on CT images at 3weeks after surgery and was remodeled to restore the original anatomy of the ilium on serial CT images. At 12weeks, the implant was enclosed within new bone, and histological analysis revealed bone formation on and within the implant. Little bone formation was noted in the control group. ConclusionsThis new method may enable efficacious and precise regenerative repair of large bone defects without bone grafting.

Controlled release of BMP-2 from a sintered polymer scaffold enhances bone repair in a mouse calvarial defect model

Sustained and controlled delivery of growth factors, such as bone morphogenetic protein 2 (BMP-2), from polymer scaffolds has excellent potential for enhancing bone regeneration. The present study investigated the use of novel sintered polymer scaffolds prepared using temperature-sensitive PLGA/PEG particles. Growth factors can be incorporated into these scaffolds by mixing the reconstituted growth factor with the particles prior to sintering. The ability of the PLGA/PEG scaffolds to deliver BMP-2 in a controlled and sustained manner was assessed and the osteogenic potential of these scaffolds was determined in a mouse calvarial defect model. BMP-2 was released from the scaffolds in vitro over 3 weeks. On average, ca. 70% of the BMP-2 loaded into the scaffolds was released by the end of this time period. The released BMP-2 was shown to be active and to induce osteogenesis when used in a cell culture assay. A substantial increase in new bone volume of 55% was observed in a mouse calvarial defect model for BMP-2-loaded PLGA/PEG scaffolds compared to empty defect controls. An increase in new bone volume of 31% was observed for PLGA/PEG scaffolds without BMP-2, compared to empty defect controls. These results demonstrate the potential of novel PLGA/PEG scaffolds for sustained BMP-2 delivery for bone-regeneration applications.

Repair of an osteochondral defect by sustained delivery of BMP-2 or TGFβ1 from a bilayered alginate-PLGA scaffold

Regeneration of cartilage defects can be accelerated by localized delivery of appropriate growth factors (GFs) from scaffolds. In the present study we analysed the in vitro and in vivo release rates and delivery efficacies of transforming growth factor-β1 (TGFβ1) and bone morphogenetic protein-2 (BMP-2) from a bilayered system, applied for osteochondral defect repair in a rabbit model. A bone-orientated, porous PLGA cylinder was overlaid with GF containing PLGA microspheres, dispersed in an alginate matrix. Four microsphere formulations were incorporated: (a) blank ones; (b) microspheres containing 50 ng TGFβ1; (c) microspheres containing 2.5 µg BMP-2; and (d) microspheres containing 5 µg BMP-2. Release kinetics and tissue distributions were determined using iodinated ((125) I) GFs. Bioactivity of in vitro released BMP-2 and TGFβ1 was confirmed in cell-based assays. In vivo release profiles indicated good GF release control. 20% of BMP-2 and 15% of TGFβ1 were released during the first day. Virtually the total dose was delivered at the end of week 6. Significant histological differences were observed between untreated and GF-treated specimens, there being especially relevant short-term outcomes with 50 ng TGFβ1 and 5 µg BMP-2. Although the evaluation scores for the newly formed cartilage did not differ significantly, 5 µg BMP-2 gave rise to higher quality cartilage with improved surface regularity, tissue integration and increased collagen-type II and aggrecan immunoreactivity 2 weeks post-implantation. Hence, the bilayered system controlled GF release rates and led to preserved cartilage integrity from 12 weeks up to at least 24 weeks.

Effect of bone morphogenetic protein 2 on tendon‐to‐bone healing in a canine flexor tendon model

Tendon-to-bone healing is typically poor, with a high rate of repair-site rupture. Bone loss after tendon-to-bone repair may contribute to poor outcomes. Therefore, we hypothesized that the local application of the osteogenic growth factor bone morphogenetic protein 2 (BMP-2) would promote bone formation, leading to improved repair-site mechanical properties. Intrasynovial canine flexor tendons were injured in Zone 1 and repaired into bone tunnels in the distal phalanx. BMP-2 was delivered to the repair site using either a calcium phosphate matrix (CPM) or a collagen sponge (COL) carrier. Each animal also received carrier alone in an adjacent repair to serve as an internal control. Repairs were evaluated at 21 days using biomechanical, radiographic, and histologic assays. Although an increase in osteoid formation was noted histologically, no significant increases in bone mineral density occurred. When excluding functional failures (i.e., ruptured and gapped repairs), mechanical properties were not different when comparing BMP-2/CPM groups with carrier controls. A significantly higher percentage of BMP-2 treated specimens had a maximum force <20 N compared to carrier controls. While tendon-to-bone healing can be enhanced by addressing the bone loss that typically occurs after surgical repair, the delivery of BMP-2 using the concentrations and methods of the current study did not improve mechanical properties over carrier alone. The anticipated anabolic effect of BMP-2 was insufficient in the short time frame of this study to counter the post-repair loss of bone.

The Effect of the Delivery Carrier on the Quality of Bone Formed via Bone Morphogenetic Protein‐2

Bone morphogenetic protein-2 (BMP-2) can induce bone generation in vivo. Although many studies have demonstrated an increased quantity of regenerated bone after the delivery of BMP-2 using various carriers, little is known about the effect of the carrier type on the quality of the regenerated bone. In this study, we compared the quality of regenerated bone when BMP-2 was delivered with either β-tricalcium phosphate (β-TCP) or heparin-conjugated fibrin (HCF), both of which are shown to be excellent carriers for BMP-2. The profile of the release of BMP-2 was not significantly different between the delivery carriers. However, the alkaline phosphate activity of cultured osteoblasts was significantly higher when BMP-2 was delivered using HCF than when BMP-2 was delivered using β-TCP. To evaluate the quality of the regenerated bone, both types of BMP-2 carriers were implanted into critical-sized calvarial defects in mice. Eight weeks after implantation, the regenerated bone was examined by histomorphometry. Importantly, the treatment using HCF + BMP-2 and β-TCP + BMP-2 resulted in similar bone formation areas. However, the treatment using HCF + BMP-2 resulted in significantly higher bone density than the treatment using β-TCP + BMP-2. This study shows that a BMP-2 delivery carrier can modulate the quality of bone regenerated via BMP-2 delivery.

Sequential delivery of BMP-2 and IGF-1 using a chitosan gel with gelatin microspheres enhances early osteoblastic differentiation

The purpose of this study was to develop and characterize a chitosan gel/gelatin microsphere (MSs) dual delivery system for sequential release of bone morphogenetic protein-2 (BMP-2) and insulin-like growth factor-1 (IGF-1) to enhance osteoblast differentiation in vitro. We made and characterized the delivery system based on its degree of cross-linking, degradation, and release kinetics. We also evaluated the cytotoxicity of the delivery system and the effect of growth factors on cell response using pre-osteoblast W-20-17 mouse bone marrow stromal cells. IGF-1 was first loaded into MSs, and then the IGF-1-containing MSs were encapsulated into the chitosan gel which contained BMP-2. Cross-linking of gelatin with glyoxal via Schiff bases significantly increased thermal stability and decreased the solubility of the MSs, leading to a significant decrease in the initial release of IGF-1. Encapsulation of the MSs into the chitosan gel generated polyelectrolyte complexes by intermolecular interactions, which further affected the release kinetics of IGF-1. This combinational delivery system provided an initial release of BMP-2 followed by a slow and sustained release of IGF-1. Significantly greater alkaline phosphatase activity was found in W-20-17 cells treated with the sequential delivery system compared with other treatments (P<0.05) after a week of culture.

Comparison between heparin-conjugated fibrin and collagen sponge as bone morphogenetic protein-2 carriers for bone regeneration

Bone morphogenetic protein-2 (BMP-2) is used to promote bone regeneration. However, the bone regeneration ability of BMP-2 relies heavily on the delivery vehicle. Previously, we have developed heparin-conjugated fibrin (HCF), a vehicle for long-term delivery of BMP-2 and demonstrated that long-term delivery of BMP-2 enhanced its osteogenic efficacy as compared to short-term delivery at an equivalent dose. The aim of this study was to compare the bone-forming ability of the BMP-2 delivered by HCF to that delivered by clinically utilized BMP-2 delivery vehicle collagen sponge. An in vitro release profile of BMP-2 showed that HCF released 80% of the loaded BMP-2 within 20 days, whereas collagen sponge released the same amount within the first 6 days. Moreover, the BMP-2 released from the HCF showed significantly higher alkaline phosphatase activity than the BMP-2 released from collagen sponge at 2 weeks in vitro. Various doses of BMP-2 were delivered with HCF or collagen sponge to mouse calvarial defects. Eight weeks after the treatment, bone regeneration was evaluated by computed tomography, histology, and histomorphometric analysis. The dose of BMP-2 delivered by HCF to achieve 100% bone formation in the defects was less than half of the BMP-2 dose delivered by collagen sponge to achieve a similar level of bone formation. Additionally, bone regenerated by the HCF-BMP-2 had higher bone density than bone regenerated by the collagen sponge-BMP-2. These data demonstrate that HCF as a BMP-2 delivery vehicle exerts better osteogenic ability of BMP-2 than collagen sponge, a clinically utilized delivery vehicle.

Bone marrow-derived heparan sulfate potentiates the osteogenic activity of bone morphogenetic protein-2 (BMP-2)

Lowering the efficacious dose of bone morphogenetic protein-2 (BMP-2) for the repair of critical-sized bone defects is highly desirable, as supra-physiological amounts of BMP-2 have an increased risk of side effects and a greater economic burden for the healthcare system. To address this need, we explored the use of heparan sulfate (HS), a structural analog of heparin, to enhance BMP-2 activity. We demonstrate that HS isolated from a bone marrow stromal cell line (HS-5) and heparin each enhances BMP-2-induced osteogenesis in C2C12 myoblasts through increased ALP activity and osteocalcin mRNA expression. Commercially available HS variants from porcine kidney and bovine lung do not generate effects as great as HS5. Heparin and HS5 influence BMP-2 activity by (i) prolonging BMP-2 half-life, (ii) reducing interactions between BMP-2 with its antagonist noggin, and (iii) modulating BMP2 distribution on the cell surface. Importantly, long-term supplementation of HS5 but not heparin greatly enhances BMP-2-induced bone formation in vitro and in vivo. These results show that bone marrow-derived HS effectively supports bone formation, and suggest its applicability in bone repair by selectively facilitating the delivery and bioavailability of BMP-2.

A silk hydrogel-based delivery system of bone morphogenetic protein for the treatment of large bone defects

The use of tissue grafting for the repair of large bone defects has numerous limitations including donor site morbidity and the risk of disease transmission. These limitations have prompted research efforts to investigate the effects of combining biomaterial scaffolds with biochemical cues to augment bone repair. The goal of this study was to use a critically-sized rat femoral segmental defect model to investigate the efficacy of a delivery system consisting of an electrospun polycaprolactone (PCL) nanofiber mesh tube with a silk fibroin hydrogel for local recombinant bone morphogenetic protein 2 (BMP-2) delivery. Bilateral 8 mm segmental femoral defects were formed in 13-week-old Sprague Dawley rats. Perforated electrospun PCL nanofiber mesh tubes were fitted into the adjacent native bone such that the lumen of the tubes contained the defect (Kolambkar et al., 2011b). Silk hydrogels with or without BMP-2 were injected into the defect. Bone regeneration was longitudinally assessed using 2D X-ray radiography and 3D microcomputed topography (μCT). Following sacrifice at 12 weeks after surgery, the extracted femurs were either subjected to biomechanical testing or assigned for histology. The results demonstrated that silk was an effective carrier for BMP-2. Compared to the delivery system without BMP-2, the delivery system that contained BMP-2 resulted in more bone formation (p<0.05) at 4, 8, 12 weeks after surgery. Biomechanical properties were also significantly improved in the presence of BMP-2 (p<0.05) and were comparable to age-matched intact femurs. Histological evaluation of the defect region indicated that the silk hydrogel has been completely degraded by the end of the study. Based on these results, we conclude that a BMP-2 delivery system consisting of an electrospun PCL nanofiber mesh tube with a silk hydrogel presents an effective strategy for functional repair of large bone defects.

Improved spinal fusion efficacy by long-term delivery of bone morphogenetic protein-2 in a rabbit model

Background and purpose Various new delivery systems for recombinant human bone morphogenetic protein-2 (rhBMP-2) have been introduced to improve its efficacy in osteogenesis. Of these, we have previously developed heparin-conjugated PLGA nanospheres (HCPN) as a long-term delivery system for BMP-2. In vitro studies have shown that the BMP-2 long-term delivery system enhances the level of bone formation. However, the long-term effects of BMP-2 on spinal fusion have not been assessed. Therefore, we now tested the hypothesis that the long-term delivery of BMP-2 using HCPN improves spinal fusion compared to short-term delivery in a rabbit fusion model.Methods 24 adult New Zealand White rabbits underwent posterolateral fusion (6 animals in 4 groups). The autograft group received an autologous iliac chip bone graft as a positive control. The BMP-2-PN group received rhBMP-2 (20 μg per implant) and PLGA nanospheres (PN) suspended in fibrin gel, and served as a short-term release group. The HCPN group received HCPN suspended in fibrin gel without BMP-2 as a negative control. The BMP-2-HCPN group received rhBMP-2 (20 μg per implant)-bound HCPN suspended in fibrin gel and served as a long-term release group. All animals were killed 12 weeks after surgery. Manual palpation, axial tensile tests, radiography, and histological evaluations were then performed.Results The spinal fusion rate and Young's modulus of the fusion mass were better in the BMP-2 long-term delivery group than in the short-term delivery group at an equivalent dose. However, the outcome of the long-term delivery was inferior to that of the autograft group.Interpretation The HCPN system showed potential as an effective carrier that might improve the osteogenic efficacy of BMP-2 for spinal fusion.

Material-related effects of BMP-2 delivery systems on bone regeneration

Material-related effects of a brushite and a PLGA controlled release system loaded with two distinct doses of bone morphogenetic protein-2 (BMP-2) (3.5 and 17.5 μg), pre-encapsulated in poly(lactic-co-glycolic acid) (PLGA), were investigated in an intramedullary femur defect model in rabbits. The systems were characterized in vitro and in vivo over 12 weeks in terms of morphology, release kinetics, porosity, molecular weight, and composition using scanning electron microscopy, mercury porosimetry, radioactivity counting, X-ray diffractometry, differential scanning calorimetry, and gel permeation chromatography. During the experimental period the investigated systems underwent significant changes in vitro as well as in vivo. It should be stressed that the two in vitro release patterns were similar, however in vivo parallel profiles were observed with a higher burst effect for BMP-2 in the PLGA system. The PLGA system degraded and disintegrated significantly faster than the brushite system, which suffered slowly progressing external erosion and, additionally, material resorption by osteoclasts in vivo. The consequences of this were reflected in the degree of bone regeneration. Although a sustained delivery of BMP-2 was achieved with both systems, the brushite construct, independent of the loaded growth factor dose, failed to consistently induce defect repair, a result attributed to its slow resorption rate. In contrast, the PLGA system resulted in complete regeneration with mature trabecular bone formation 8 weeks after implantation.

Enhancement of Human Peripheral Blood Mononuclear Cell Transplantation-Mediated Bone Formation

Recent studies have demonstrated the existence of osteoblast progenitor cells in circulating blood. Here we show that local delivery of bone morphogenetic protein-2 (BMP-2) to cell transplantation sites induces in situ osteogenic differentiation of transplanted human peripheral blood mononuclear cells (PBMNCs) and enhances in vivo bone formation mediated by PBMNC transplantation. Human PBMNCs were seeded on scaffolds with or without BMP-2 and implanted subcutaneously into athymic mice. Nonseeded scaffolds with BMP-2 were also implanted. Eight weeks later, radiographic and histological analyses showed that the PBMNC + BMP-2 group had undergone much more extensive bone formation than either the PBMNC group or BMP-2 group. Only the PBMNC + BMP-2 group expressed human Cbfa1, osteonectin, and osteocalcin, suggesting in situ osteogenic differentiation of and bone formation by transplanted human PBMNCs, while the other groups did not express these genes. This study provides a method to enhance human PBMNC transplantation-mediated bone formation.

Enzymatic Crosslinking and Degradation of Gelatin as a Switch for Bone Morphogenetic Protein-2 Activity

Current therapies for tissue regeneration rely on the presence or direct delivery of growth factors to sites of repair. Bone morphogenetic protein-2 (BMP-2), combined with a carrier (usually collagen), is clinically proven to induce new bone formation during spinal fusion and nonunion repair. However, due to BMP-2's short half-life and its diffusive properties, orders of magnitude above physiological levels are required to ensure effectiveness. In addition, a high dose of this multifunctional growth factor is known to induce adverse effects in patients. To circumvent these challenges, we proposed and tested a new approach for BMP-2 delivery, by controlling BMP activity via carrier binding and localized proteolysis. BMP-2 was covalently bound to gelatin through site-specific enzymatic crosslinking using a microbial transglutaminase. Binding of BMP-2 to gelatin can completely switch off BMP-2 activity, as evidenced by loss of its transdifferentiating ability toward C2C12 promyoblasts. When gelatin sequestered BMP-2 is incubated with either microbial collagenase or tissue-derived matrix metalloproteinases, BMP-2 activity is fully restored. The activity of released BMP-2 correlates with the protease activity in a dose- and time-dependent manner. This observation suggests a novel way of delivering BMP-2 and controlling its activity. This improved delivery method, which relies on a physiological feedback, should enhance the known potential of this and other growth factors for tissue repair and regeneration.

Apatite-Coated Collagen Scaffold for Bone Morphogenetic Protein-2 Delivery

Bone morphogenetic proteins (BMPs) are the most potent osteoinductive growth factors. BMP-2 is clinically used for spine fusion and bone fracture healing. Commercially available BMP-2 uses a type I collagen scaffold as a carrier, but it only releases BMP-2 for a short period of time, which may release the bone formation efficacy. In the present study, we hypothesize that apatite coating of a collagen scaffold increases the release period as well as the osteogenic efficacy of BMP-2. Apatite coating was achieved by incubating collagen scaffolds in simulated body fluids (SBFs). Apatite coating on collagen scaffolds was confirmed by X-ray diffraction, electron spectroscopy for chemical analysis, attenuated total reflectance-Fourier transform infrared spectroscopy, and scanning electron microscopy. The rate and period of BMP-2 release from apatite-coated collagen scaffolds varied depending on the concentration of SBFs used. The 5× and 10× SBF apatite-coated collagen scaffolds released 91.8%±11.5% and 82.2%±13.1% of their loaded BMP-2 over 13 days in vitro, respectively, whereas noncoated collagen scaffold released 98.3%±2.2% over the initial one day. BMP-2 released from apatite-coated collagen scaffold significantly increased the alkaline phosphatase activity of cultured osteoblasts, compared with BMP-2 released from noncoated collagen scaffold. Computed tomography and histomorphometry showed that BMP-2 delivery using apatite-coated collagen scaffolds resulted in 2.5-fold higher bone formation volume and 4.0-fold higher bone formation area than BMP-2 delivery using noncoated collagen scaffolds. This study shows that simple apatite coating of a collagen scaffold results in a BMP-2 carrier that renders long-term release of BMP-2 and dramatically enhances osteogenic efficacy.

Spatiotemporal delivery of bone morphogenetic protein enhances functional repair of segmental bone defects.

Osteogenic growth factors that promote endogenous repair mechanisms hold considerable potential for repairing challenging bone defects. The local delivery of one such growth factor, bone morphogenetic protein (BMP), has been successfully translated to clinical practice for spinal fusion and bone fractures. However, improvements are needed in the spatial and temporal control of BMP delivery to avoid the currently used supraphysiologic doses and the concomitant adverse effects. We have recently introduced a hybrid protein delivery system comprised of two parts: a perforated nanofibrous mesh that spatially confines the defect region and a functionalized alginate hydrogel that provides temporal growth factor release kinetics. Using this unique spatiotemporal delivery system, we previously demonstrated BMP-mediated functional restoration of challenging 8mm femoral defects in a rat model. In this study, we compared the efficacy of the hybrid system in repairing segmental bone defects to that of the current clinical standard, collagen sponge, at the same dose of recombinant human BMP-2. In addition, we investigated the specific role of the nanofibrous mesh tube on bone regeneration. Our results indicate that the hybrid delivery system significantly increased bone regeneration and improved biomechanical function compared to collagen sponge delivery. Furthermore, we observed that presence of the nanofiber mesh tube was essential to promote maximal mineralized matrix synthesis, prevent extra-anatomical mineralization, and guide an integrated pattern of bone formation. Together, these results suggest that spatiotemporal strategies for osteogenic protein delivery may enhance clinical outcomes by improving localized protein retention.

Hyaline Cartilage Regeneration by Combined Therapy of Microfracture and Long-Term Bone Morphogenetic Protein-2 Delivery

Microfracture of cartilage induces migration of bone-marrow-derived mesenchymal stem cells. However, this treatment often results in fibrocartilage regeneration. Growth factors such as bone morphogenetic protein (BMP)-2 induce the differentiation of bone-marrow-derived mesenchymal stem cells into chondrocytes, which can be used for hyaline cartilage regeneration. Here, we tested the hypothesis that long-term delivery of BMP-2 to cartilage defects subjected to microfracture results in regeneration of high-quality hyaline-like cartilage, as opposed to short-term delivery of BMP-2 or no BMP-2 delivery. Heparin-conjugated fibrin (HCF) and normal fibrin were used as carriers for the long- and short-term delivery of BMP-2, respectively. Rabbit articular cartilage defects were treated with microfracture combined with one of the following: no treatment, fibrin, short-term delivery of BMP-2, HCF, or long-term delivery of BMP-2. Eight weeks after treatment, histological analysis revealed that the long-term delivery of BMP-2 group (microfracture + HCF + BMP-2) showed the most staining with alcian blue. A biochemical assay, real-time polymerase chain reaction assay and Western blot analysis all revealed that the long-term delivery of BMP-2 group had the highest glucosaminoglycan content as well as the highest expression level of collagen type II. Taken together, the long-term delivery of BMP-2 to cartilage defects subjected to microfracture resulted in regeneration of hyaline-like cartilage, as opposed to short-term delivery or no BMP-2 delivery. Therefore, this method could be more convenient for hyaline cartilage regeneration than autologous chondrocyte implantation due to its less invasive nature and lack of cell implantation.

Nanogel‐based scaffold delivery of prostaglandin E2 receptor–specific agonist in combination with a low dose of growth factor heals critical‐size bone defects in mice

Regeneration of bone requires the combination of appropriate drugs and an appropriate delivery system to control cell behavior. However, the delivery of multiple drugs to heal bone is complicated by the availability of carriers. The aim of this study was to explore a new system for delivery of a selective EP4 receptor agonist (EP4A) in combination with low-dose bone morphogenetic protein 2 (BMP-2). Combined delivery of EP4A and BMP-2 was carried out with a nanogel-based scaffold in the shape of a disc, to repair critical-size circle-shaped bone defects in calvariae that otherwise did not heal spontaneously. Combination treatment with EP4A and low-dose BMP-2 in nanogel efficiently activated bone cells to regenerate calvarial bone by forming both outer and inner cortical plates as well as bone marrow tissue to regenerate a structure similar to that of intact calvaria. EP4A enhanced low-dose BMP-2-induced cell differentiation and activation of transcription events in osteoblasts. These data indicate that combined delivery of EP4A and low-dose BMP-2 via nanogel-based hydrogel provides a new system for bone repair.

An evaluation of BMP‐2 delivery from scaffolds with miniaturized dental implants in a novel rat mandible model

The purpose of this study was three-fold: (a) to develop a new small animal model to evaluate dental implant systems that recapitulates aspects of the challenging intraoral environment, (b) screen several scaffolds for in vivo bone forming efficacy when used to deliver non-glycosylated bone morphogenetic protein-2 (BMP-2) together with a miniaturized titanium (Ti) dental implant, and (c) identify correlations between in vitro BMP-2 release rates and in vivo results. The scaffolds tested were: (1) collagen-hydroxyapatite composite (Col/HA), (2) polyethylene glycol hydrogel (PEG-hydrogel), and (3) Col/HA infused with PEG-hydrogel (Col/HA/PEG-hydrogel). BMP-2 delivery directly from the Ti implants rather than from the scaffolds was also tested. MicroCT analyses at 4 weeks showed that the maximum volume and height of new bone occurred when BMP-2 (10 μg) was delivered from the Col/HA/PEG-hydrogel scaffolds. BMP-2 delivery from the Ti implant was not as effective as from the scaffolds. While in vitro BMP-2 release was highest for the PEG-hydrogel, the scaffold most successful in vivo was the Col/HA/PEG-hydrogel scaffold because it had the necessary mechanical strength to perform well in the mandibular bone environment. The in vitro release studies suggested a threshold dose of 5 μg which was borne out by the in vivo dose response studies.

Bone marrow stromal cells with a combined expression of BMP-2 and VEGF-165 enhanced bone regeneration**All animals used in this study were treated in accordance with the ‘Guiding Principles for Research Involving Animals and Human Beings’ as adopted by The American Physiological Society, and were approved by the Ethics Committee of Shanghai Ninth People's Hospital affiliated to Shanghai JiaoTong University, School

Bone graft substitutes with osteogenic factors alone often exhibit poor bone regeneration due to inadequate vascularization. Combined delivery of osteogenic and angiogenic factors from biodegradable scaffolds may enhance bone regeneration. We evaluated the effects of bone morphogenetic protein 2 (BMP2) and vascular endothelial growth factor (VEGF), combined with natural coral scaffolds, on the repair of critical-sized bone defects in rabbit orbits. In vitro expanded rabbit bone marrow stromal cells (BMSCs) were transfected with human BMP2 and VEGF165 genes. Target protein expression and osteogenic differentiation were confirmed after gene transduction. Rabbit orbital defects were treated with a coral scaffold loaded with BMP2-transduced and VEGF-transduced BMSCs, BMP2-expressing BMSCs, VEGF-expressing BMSCs, or BMSCs without gene transduction. Volume and density of regenerated bone were determined by micro-computed tomography at 4, 8, and 16 weeks after implantation. Neovascularity, new bone deposition rate, and new bone formation were measured by immunostaining, tetracycline and calcein labelling, and histomorphometric analysis at different time points. The results showed that VEGF increased blood vessel formation relative to groups without VEGF. Combined delivery of BMP2 and VEGF increased new bone deposition and formation, compared with any single factor. These findings indicate that mimicking the natural bone development process by combined BMP2 and VEGF delivery improves healing of critical-sized orbital defects in rabbits.