Wavelength Conversion Degree Research Articles

High-power, cascaded random Raman fiber laser with near complete conversion over wide wavelength and power tuning.

Cascaded Raman fiber lasers based on random distributed feedback (RDFB) are proven to be wavelength agile, enabling high powers outside rare-earth doped emission windows. In these systems, by simply adjusting the input pump power and wavelength, high-power lasers can be achieved at any wavelength within the transmission window of optical fibers. However, there are two primary limitations associated with these systems, which in turn limits further power scaling and applicability. Firstly, the degree of wavelength conversion or spectral purity (percentage of output power in the desired wavelength band) that can be achieved is limited. This is attributed to intensity noise transfer of input pump source to Raman Stokes orders, which causes incomplete power transfer reducing the spectral purity. Secondly, the output power range over which the high degree of wavelength conversion is maintained is limited. This is due to unwanted Raman conversion to the next Stokes order with increasing power. Here, we demonstrate a high-power, cascaded Raman fiber laser with near complete wavelength conversion over a wide wavelength and power range. We achieve this by culmination of two recent developments in this field. We utilize our recently proposed filtered feedback mechanism to terminate Raman conversion at arbitrary wavelengths, and we use the recently demonstrated technique (by J Dong and associates) of low-intensity noise pump sources (Fiber ASE sources) to achieve high-purity Raman conversion. Pump-limited output powers >34W and wavelength conversions >97% (highest till date) were achieved over a broad - 1.1μm to 1.5μm tuning range. In addition, high spectral purity (>90%) was maintained over a broad output power range (>15%), indicating the robustness of this laser against input power variations.

Scheduling Based on Minimal Conversion Degree With Respect to Wavelength Conversion and Coding in Optical Multicast Node

Optical multicast collision occurs more frequently for the replication and forwarding of optical multicast increase in the switch node. In this letter, an optical multicast switching node architecture configured with wavelength conversion and network coding is proposed. The proposed node architecture uses a group of output shared wavelength converters in the wavelength domain and a group of feedback shared encoders to resolve the optical multicast collision. To minimize the total conversion degree, we propose an improved algorithm, maximal weighted stable set, to assign wavelength converter with respect to the wavelength conversion degree as the weight. Concretely, the graph coloring matching algorithm is used to select the wavelength converter with minimal wavelength conversion degrees. Compared with the node architecture with two layers wavelength conversion and with full range wavelength conversion, analyses and simulation results show that the proposed node architecture largely reduces the packet loss probability with low cost of wavelength conversion and results in a better performance to solve multicast collision.

The Gain of Performance of Optical WDM Networks

We study the blocking probability and performance of single‐fiber and multifiber optical networks with wavelength division multiplexing (WDM). We extend the well‐known analytical blocking probability model by Barry and Humblet to the general model, which is proposed for both single‐fiber and multifiber network paths with any kind of wavelength conversion (no, limited, or full wavelength conversion) and for uniform and nonuniform link loads. We investigate the effect of the link load, wavelength conversion degree, and the number of wavelengths, fibers, and hops on blocking probability. We also extend the definition of the gain of wavelength conversion by Barry and Humblet to the gain of performance, which is fully general. Thanks to this definition and implementation of our model, we compare different WDM node architectures and present interesting results.

Design and implementation of wavelength-flexible network nodes

This paper analytically and experimentally examines node architectures for wavelength-routing networks, with emphasis on the degree of wavelength conversion provided. Wavelength flexibility simplifies network management and increases network capacity but requires large cross-connects and deployment of wavelength converters (WCs). A simple probabilistic model is used to upper-bound the number of WCs required at a network node, under dynamic traffic load. When provisioned in a shareable pool, with a fixed number of wavelength channels per fiber, the number of WCs required remains low as overall network capacity is scaled up. Motivated by this analysis, experiments demonstrate the feasibility of implementing wavelength-flexible network nodes using large microelectromechanical (MEMS)-based cross-connects and all-optical WCs. In one design, WCs were attached directly to cross-connect output ports, and in another, they were attached in a loop-back fashion to allow sharing. Error-free transmission at 10 Gb/s was demonstrated in both cases.

Routing Mechanisms Employing Adaptive Weight Functions for Shortest Path Routing in Optical WDM Networks

Optical dense wavelength division multiplexed (DWDM) networks are an attractive candidate for the next generation Internet and beyond. In this paper, we consider routing and wavelength assignment in a wide area wavelength routed backbone network that employs circuit-switching. When a session request is received by the network, the routing and wavelength assignment (RWA) task is to establish a lightpath between the source and destination. That is, determine a suitable path and assign a set of wavelengths for the links on this path. We consider a link state protocol approach and use Dijkstra’s shortest path algorithm, suitably modified for DWDM networks, for computing the shortest paths. In [1] we proposed WDM aware weight functions that included factors such as available wavelengths per link, total wavelengths per link. In this paper, we present new weight functions that exploit the strong correlation between blocking probability and number of hops involved in connection setup to increase the performance of the network. We also consider alternate path routing that computes the alternate paths based on WDM aware weight functions. The impact of the weight functions on the blocking probability and delay is studied through discrete event simulation. The system parameters varied include number of network nodes, wavelengths, degree of wavelength conversion, and load. The results show that the weight function that incorporates both hop count and available wavelength provides the best performance in terms of blocking probability.