dATP Analogues Research Articles

Electrochemical genosensor for the direct detection of tailed PCR amplicons incorporating ferrocene labelled dATP

An electrochemical genosensor for the detection and quantification of Karlodinium armiger is presented. The genosensor exploits tailed primers and ferrocene labelled dATP analogue to produce PCR products that can be directly hybridised on a gold electrode array and quantitatively measured using square wave voltammetry. Tailed primers consist of a sequence specific for the target, followed by a carbon spacer and a sequence specifically designed not to bind to genomic DNA, resulting in a duplex flanked by single stranded binding primers. The incorporation of the 7-(ferrocenylethynyl)-7-deaza-2′-deoxyadenosine triphosphate was optimised in terms of a compromise between maximum PCR efficiency and the limit of detection and sensitivity attainable using electrochemical detection via hybridisation of the tailed, ferrocene labelled PCR product. A limit of detection of 277aM with a linear range from 315aM to 10 fM starting DNA concentration and a sensitivity of 122 nA decade−1 was achieved. The system was successfully applied to the detection of genomic DNA in real seawater samples.

New chirally modified bisphosphonates for synthesis of individual beta,gamma-CHX-deoxynucleotide diastereomers

Individual diastereomers of CXY bisphosphonate analogues of dNTPs or NTPs are useful chemical stereoprobes to investigate interactions within the chiral active site environment of enzymes such as polymerases and kinases. We previously reported synthetic access to β,γ-CHX-dGTPs (X = F or Cl) via a bisphosphonate synthon with an (R)-methyl mandelate auxiliary and have extended this approach to dTTP and dATP analogues. As removal of the chiral auxiliary by (Pd/C) hydrogenolysis is incompatible with the cytosine heterocycle and also with X = Br, we have now designed bisphosphonate synthons using (R)-(+)-α-ethylbenzylamine or methyl (R)-(–)-phenylglycine auxiliaries and equipped with an o-nitrobenzyl ester protecting group allowing photochemical deprotection. These new synthons have made possible the first syntheses of individual dCTP and monobromo-substituted dNTP β,γ-CHX diastereomers.

ELTA: Enzymatic Labeling of Terminal ADP-Ribose

ADP-ribosylation refers to the addition of one ormore ADP-ribose groups onto proteins. The attached ADP-ribose monomers or polymers, commonly known as poly(ADP-ribose) (PAR), modulate the activities of the modified substrates or their binding affinities to other proteins. However, progress in this area is hindered by a lack of tools to investigate this protein modification. Here, we describe anew method named ELTA (enzymatic labeling of terminal ADP-ribose) for labeling free or protein-conjugatedADP-ribose monomers and polymers attheir 2'-OH termini using the enzyme OAS1 and dATP. When coupled with various dATP analogs (e.g., radioactive, fluorescent, affinity tags), ELTA can be used to explore PAR biology with techniques routinely used to investigate DNA or RNA function. We demonstrate that ELTA enables the biophysical measurements of protein binding to PAR of a defined length, detection of PAR length from proteins and cells, and enrichment of sub-femtomole amounts of ADP-ribosylated peptides from cell lysates.

DNA Primer Extension with Cyclopropenylated 7-Deaza-2'-deoxyadenosine and Efficient Bioorthogonal Labeling in Vitro and in Living Cells.

A deoxyadenosine triphosphate (dATP) analogue for DNA labeling was synthesized with the 1-methylcyclopropene (1MCP) group at the 7-position of 7-deaza-2'-deoxyadenosine and applied for primer extension experiments. The real-time kinetic data reveals that this 1MCP-modified dATP analogue is incorporated into DNA much faster than that of the similarly 1MCP-modified deoxyuridine triphosphate (dUTP) analogue. The postsynthetic fluorescent labeling of these oligonucleotides works efficiently according to PAGE analysis, and can be applied for immobilization of a functional antibody on a surface. Site-specific labeling at two different positions in DNA was achieved and the bioorthogonality of the postsynthetic fluorescent labeling was demonstrated in living HeLa cells.

Intrinsic mutagenic properties of 5-chlorocytosine: A mechanistic connection between chronic inflammation and cancer

During chronic inflammation, neutrophil-secreted hypochlorous acid can damage nearby cells inducing the genomic accumulation of 5-chlorocytosine (5ClC), a known inflammation biomarker. Although 5ClC has been shown to promote epigenetic changes, it has been unknown heretofore if 5ClC directly perpetrates a mutagenic outcome within the cell. The present work shows that 5ClC is intrinsically mutagenic, both in vitro and, at a level of a single molecule per cell, in vivo. Using biochemical and genetic approaches, we have quantified the mutagenic and toxic properties of 5ClC, showing that this lesion caused C→T transitions at frequencies ranging from 3-9% depending on the polymerase traversing the lesion. X-ray crystallographic studies provided a molecular basis for the mutagenicity of 5ClC; a snapshot of human polymerase β replicating across a primed 5ClC-containing template uncovered 5ClC engaged in a nascent base pair with an incoming dATP analog. Accommodation of the chlorine substituent in the template major groove enabled a unique interaction between 5ClC and the incoming dATP, which would facilitate mutagenic lesion bypass. The type of mutation induced by 5ClC, the C→T transition, has been previously shown to occur in substantial amounts both in tissues under inflammatory stress and in the genomes of many inflammation-associated cancers. In fact, many sequence-specific mutational signatures uncovered in sequenced cancer genomes feature C→T mutations. Therefore, the mutagenic ability of 5ClC documented in the present study may constitute a direct functional link between chronic inflammation and the genetic changes that enable and promote malignant transformation.

Mutant firefly luciferases with improved specific activity and dATP discrimination constructed by yeast cell surface engineering

Pyrosequencing system utilizing luciferase is one of the next-generation DNA sequencing systems. However, there is a crucial problem with the current pyrosequencing system: luciferase cannot discriminate between ATP and dATP completely, and dATPαS must be used as the dATP analogue. dATPαS is expensive and has low activity for the enzyme. If luciferase can clearly recognize the difference between ATP and dATP, dATP could be used instead of the expensive dATPαS in the pyrosequencing system. We attempted to prepare a novel luciferase with improved specific activity and dATP discrimination with the molecular display method. First, we selected two amino acid residues, Ser440 and Ser456, as target residues for mutation from the whole sequence of Photinus pyralis luciferase; we comprehensively mutated these two amino acids. A mutant luciferase library was constructed using yeast cell surface engineering. Through three step-wide screenings with individual conditions, we easily and speedily isolated three candidate mutants from 1,152 candidates and analyzed the properties of these mutants. Consequently, we succeeded in obtaining interesting mutant luciferases with improved specific activity and dATP discrimination more conveniently than with other methods.

2′‐Deoxyribonucleoside Phosphoramidate Triphosphate Analogues as Alternative Substrates for E. coli Polymerase III

Thermostable bacterial polymerases like Taq, Therminator and Vent exo(-) are able to perform DNA synthesis by using modified DNA precursors, a property that is exploited in several therapeutic and biotechnological applications. Viral polymerases are also known to accept modified substrates, and this has proven crucial in the development of antiviral therapies. However, non-thermostable polymerases of bacterial origin, or engineered variants, that have similar substrate tolerance and could be used for synthetic biology purposes remain to be identified. We have identified the α subunit of Escherichia coli polymerase III (Pol III α) as a bacterial polymerase that is able to recognise and process as substrates several pyrophosphate-modified dATP analogues in place of its natural substrate dATP for template-directed DNA synthesis. A number of dATP analogues featuring a modified pyrophosphate group were able to serve as substrates during enzymatic DNA synthesis by Pol III α. Features such as the presence of potentially chelating chemical groups and the size and spatial flexibility of the chemical structure seem to be of major importance for the modified leaving group to play its role during the enzymatic reaction. In addition, we could establish that if the pyrophosphate group is altered, deoxynucleotide incorporation proceeds with an efficiency varying with the nature of the nucleobase. Our results represent a great step towards the achievement of a system of artificial DNA synthesis hosted by E. coli and involving the use of altered nucleotide precursors for nucleic acid synthesis.

α-Azido bisphosphonates: synthesis and nucleotide analogues.

The first examples of α-azido bisphosphonates [(RO)(2)P(O)](2)CXN(3) (1, R = i-Pr, X = Me; 2, R = i-Pr, X = H; 3, R = H, X = Me; 4, R = H, X = H) and corresponding β,γ-CXN(3) dGTP (5-6) and α,β-CXN(3) dATP (7-8) analogues are described. The individual diastereomers of 7 (7a/b) were obtained by HPLC separation of the dADP synthetic precursor (14a/b).

DNA Polymerase β Substrate Specificity

Apurinic/apyrimidinic (AP) sites are continuously generated in genomic DNA. Left unrepaired, AP sites represent noninstructional premutagenic lesions that are impediments to DNA synthesis. When DNA polymerases encounter an AP site, they generally insert dAMP. This preferential insertion is referred to as the A-rule. Crystallographic structures of DNA polymerase (pol) beta, a family X polymerase, with active site mismatched nascent base pairs indicate that the templating (i.e. coding) base is repositioned outside of the template binding pocket thereby diminishing interactions with the incorrect incoming nucleotide. This effectively produces an abasic site because the template pocket is devoid of an instructional base. However, the template pocket is not empty; an arginine residue (Arg-283) occupies the space vacated by the templating nucleotide. In this study, we analyze the kinetics of pol beta insertion opposite an AP site and show that the preferential incorporation of dAMP is lost with the R283A mutant. The crystallographic structures of pol beta bound to gapped DNA with an AP site analog (tertrahydrofuran) in the gap (binary complex) and with an incoming nonhydrolyzable dATP analog (ternary complex) were solved. These structures reveal that binding of the dATP analog induces a closed polymerase conformation, an unstable primer terminus, and an upstream shift of the templating residue even in the absence of a template base. Thus, dATP insertion opposite an abasic site and dATP misinsertions have common features.

Chemical synthesis, DNA incorporation and biological study of a new photocleavable 2'-deoxyadenosine mimic

The phototriggered cleavage of chemical bonds has found numerous applications in biology, particularly in the field of gene sequencing through photoinduced DNA strand scission. However, only a small number of modified nucleosides that are able to cleave DNA at selected positions have been reported in the literature. Herein, we show that a new photoactivable deoxyadenosine analogue, 3-nitro-3-deaza-2′-deoxyadenosine (d(3-NiA)), was able to induce DNA backbone breakage upon irradiation (λ > 320 nm). The d(3-NiA) nucleoside was chemically incorporated at desired positions into 40-mer oligonucleotides as a phosphoramidite monomer and subsequent hybridization studies confirmed that the resulting modified duplexes display a behaviour that is close to that of the related natural sequence. Enzymatic action of the Klenow fragment exonuclease free revealed the preferential incorporation of dAMP opposite the 3-NiA base. On the other hand, incorporation of the analogous 3-NiA triphosphate to a primer revealed high enzyme efficiency and selectivity for insertion opposite thymine. Furthermore, only the enzymatically synthesized base pair 3-NiA:T was a substrate for further extension by the enzyme. All the hybridization and enzymatic data indicate that this new photoactivable 3-NiA triphosphate can be considered as a photochemically cleavable dATP analogue.

Architectural Underpinnings of the Genetic Code for Glutamine

Structure-based mutational analysis was used to probe the architecture of the glutamine binding pocket in Escherichia coli glutaminyl-tRNA synthetase (GlnRS). Crystallographic studies of several different GlnRS complexes in a lattice that supports catalytic activity have shown that the glutamine amide group makes only ambiguous hydrogen-bonding interactions with a tyrosine hydroxyl and bound water molecule, rather than the highly specific hydrogen-bonding and electrostatic interactions made by the substrate amino acid in all other nonediting tRNA synthetases. Further, the amide oxygen of substrate glutamine accepts a hydrogen bond from the 3'-ribose hydroxyl group of ATP, an unusual distal substrate-substrate interaction also not observed in any other tRNA synthetase complex. Steady-state and pre-steady-state kinetic analysis using a 3'-dATP analogue in place of ATP shows that removal of this distal interaction does not affect K(m) for the analogue as compared with ATP, yet decreases the efficiency of aminoacylation by 10(3)-fold while significantly elevating K(m) for glutamine. In other experiments, mutation of eight nearly fully conserved residues in the glutamine binding pocket reveals decreases in k(cat)/K(m) ranging from 5- to 400-fold, and in K(d) for glutamine of up to at least 60-fold. Amino acid replacements at Tyr211 and Gln255, which participate with substrate glutamine in an antidromic circular arrangement of hydrogen bonds, cause the most severe decreases in catalytic efficiency. This finding suggests that the relative absence of direct hydrogen bonds to glutamine may be in part compensated by additional binding energy derived from the enhanced stability of this circular network. Calculations of electrostatic surface potential in the active site further suggest that a complementary electrostatic environment is also an important determinant of glutamine binding.

Role of the 2-Amino Group of Purines during dNTP Polymerization by Human DNA Polymerase α

We used a series of dNTP analogues in conjunction with templates containing modified bases to elucidate the role that N(2) of a purine plays during dNTP polymerization by human DNA polymerase alpha. Removing N(2) from dGTP had small effects during correct incorporation opposite C but specifically increased misincorporation opposite A. Adding N(2) to dATP and related analogues had small and variable effects on the efficiency of polymerization opposite T. However, the presence of N(2) greatly enhanced polymerization of these dATP analogues opposite a template C. The ability of N(2) to enhance polymerization opposite C likely results from formation of a hydrogen bond between the purine N(2) and pyrimidine O(2). Even in those cases where formation of a wobble base pair, tautomerization, and/or protonation of the base pair between the incoming dNTP and template base cannot occur (e.g., 2-pyridone.purine (or purine analogue) base pairs), N(2) enhanced formation of the base pair. Importantly, N(2) had similar effects on dNTP polymerization both when added to the incoming purine dNTP and when added to the template base being replicated. The mechanistic implications of these results regarding how pol alpha discriminates between right and wrong dNTPs are discussed.

Substrate property and incorporation accuracy of various dATP analogs during enzymatic polymerization using thermostable DNA polymerases

DNA aptamers and DNAzymes with similar function to antibodies and enzymes can be produced by in vitro selection. They would be useful as research tools for molecular biology and as indicators of specific substances for the analysis of clinical and food samples. Furthermore, development of modified DNA molecules aimed to diversify function and improve activity has recently proceeded by introducing functionalities to these DNA molecules. Such functional modified DNA molecules with an aimed activity screened from a random sequence pool of modified DNA prepared by a polymerase reaction. To enhance potential of selection library and expand diversity of modified DNA that can be synthesized enzymatically, modified analogs of 2'-deoxyadenosine triphosphate were synthesized and their substrate properties for some thermostable DNA polymerases in polymerase chain reactions (PCR) were investigated. Modified DNAs were sequenced in order to analyze incorporation accuracy of modified dATP during PCR.

Two novel dATP analogs for DNA photoaffinity labeling.

Two new photoreactive dATP analogs, N(6)-[4-azidobenzoyl-(2-aminoethyl)]-2'-deoxyadenosine-5'-triphospha+ ++ te (AB-dATP) and N(6)-[4-[3-(trifluoromethyl)-diazirin-3-yl]benzoyl-(2-aminoethyl) ]-2 '-deoxyadenosine-5'-triphosphate (DB-dATP), were synthesized from 2'-deoxyadenosine-5'-monophosphate in a six step procedure. Synthesis starts with aminoethylation of dAMP and continues with rearrangement of N(1)-(2-aminoethyl)-2'-deoxyadenosine-5'-monophosphate to N(6)-(2-aminoethyl)-2'-deoxyadenosine-5'-monophosphate (N(6)-dAMP). Next, N(6)-dAMP is converted into the triphosphate form by first protecting the N-6 primary amino group before coupling the pyrophosphate. After pyrophosphorylation, the material is deprotected to yield N(6)-(2-aminoethyl)-2'-deoxyadenosine-5'-triphosphate (N(6)-dATP). The N-6 amino group is subsequently used to attach either a phenylazide or phenyldiazirine and the photoreactive nucleotide is then enzymatically incorporated into DNA. N(6)-dATP and its photoreactive analogs AB-dATP and DB-dATP were successfully incorporated into DNA using the exonuclease-free Klenow fragment of DNA polymerase I in a primer extension reaction. UV irradiation of the primer extension reaction with AB-dATP or DB-dATP showed specific photocrosslinking of DNA polymerase I to DNA.

Two DNA Polymerases of Escherichia coli Display Distinct Misinsertion Specificities for 2-Hydroxy-dATP during DNA Synthesis

The insertion specificities of an oxidized dATP analogue, 2-hydroxydeoxyadenosine 5'-triphosphate (2-OH-dATP), were determined using the alpha (catalytic) subunit of Escherichia coli DNA polymerase III and the exonuclease-deficient Klenow fragment of DNA polymerase I. In contrast to our previous observation that mammalian DNA polymerase alpha incorporated the oxidized nucleotide opposite T and C, these two E. coli DNA polymerases incorporated 2-OH-dATP opposite T and G on the DNA template. Steady-state kinetic studies indicated that the alpha subunit incorporated 2-OH-dATP 10 times more frequently opposite T than opposite G. On the other hand, the incorporation of 2-OH-dATP opposite T by the exonuclease-deficient Klenow fragment was 2 orders of magnitude more efficient than that opposite G. These results indicate that the misinsertion specificity of 2-OH-dATP differs between replicative and repair-type DNA polymerases, and provide a biochemical basis for the mutations induced by 2-OH-dATP in E. coli.

Ultraviolet crosslinking of DNA-protein complexes via 8-azidoadenine.

The synthesis of 8-azido-2'-deoxyadenosine-5'-triphosphate is described. The photoreactive dATP analog was characterized by thin layer chromatography and UV spectroscopy. Its photoreactivity upon UV irradiation was studied. After incorporation of this dATP analog by nick translation into DNA containing the tet operator sequence the investigation of the interactions between tet operator DNA and Tet repressor becomes possible. Photocrosslinking of protein to DNA was demonstrated by the reduced migration of the DNA protein crosslinks in SDS polyacrylamide gel electrophoresis.

Synthesis of 8-Bromo- and 8-Azido-2′-deoxyadenosine-5′-O-(1-thiotriphosphate)

Abstract Treatment of 3′-O-methoxyacetylated 8-bromo-2′-deoxyadenosine (5), with a twofold excess of salicyl phosphorochloridite (6), and subsequent reaction with bis(tri-n-butylammonium) pyrophosphate and oxidation with sulfur followed by removal of the protecting group gives predominantly 8-bromo-2′-deoxyadenosine-5′-O-(1-thiotriphosphate) (7), and minor amounts of the corresponding brominated monothiophosphate. Alternatively, the photoreactive dATP analog 8-azido-2′-deoxyadenosine-5′-O-(1-thiotriphosphate) (11), is obtained by phosphorylation of unprotected 8-azido-2′-deoxyadenosine (9) with a 1.8 molar equivalent excess of thiophosphoryl chloride and bis(tri-n-butylammonium) pyrophosphate. A protection of the nucleobase 6-amino group is not required. The photoaffinity labeling reagent 11, was characterized by 31P-NMR and ion-spray mass spectroscopy and its photolysis upon long wavelength UV irradiation was studied. Both α-thioderivatives of 2′-deoxyadenosine triphosphates can be incorporated into plas...

Recognition of model DNA replication forks by the SV40 large tumor antigen.

The ability of the SV40 large tumor antigen (T antigen), a DNA helicase, to bind to model DNA replication forks was tested. DNA fork molecules were constructed either from two partially complementary oligonucleotides or from a single oligonucleotide able to form a 'panhandle' structure. T antigen specifically recognized the two-strand fork in a reaction dependent on the presence of ATP, dATP, or non-hydrolyzable analogs of ATP. T antigen asymmetrically bound the two-strand fork, protecting from nuclease cleavage a fork-proximal region on only one of the two strands. The asymmetric binding is consistent with the 3'-->5' directionality of the DNA helicase activity of T antigen. An analogous region on the one-strand fork was also bound by T antigen, suggesting that T antigen does not require a free single-stranded end to load onto the fork. Use of chemically modified DNA substrates indicated that T antigen binding to the fork utilized important contacts with the DNA sugar-phosphate backbone.

UV-induced cross-linking of Tet repressor to DNA containingtetoperator sequences and 8-azidoadenines

The synthesis of 8-azido-2'-deoxyadenosine-5'-triphosphate is described. The photoreactive dATP analog was characterized by thin layer chromatography, proton resonance spectroscopy, infrared spectroscopy and UV spectroscopy. Its photolysis upon UV irradiation was studied. After incorporation of this dATP analog into DNA containing the tet operator sequence the investigation of the interactions between tet operator DNA and Tet repressor protein by UV photocross-linking becomes possible. Photocross-linking of protein to DNA was demonstrated by the reduced migration of the DNA in SDS polyacrylamide gel electrophoresis. Addition of the inducer tetracycline prior to UV irradiation significantly reduces the DNA-protein cross-linking rate. The long wave UV light applied here does not significantly alter the DNA or the protein under the photocross-linking conditions.

Synthesis of flurocent or biotinylated nucleoside compounds

The syntesis of two types of modified nucleosides derivatives of 2'-deoxycytidine and 2'-deoxyadenosine, useful for the specific attachment of non-radioactive Labelling reagents such as fluorescent or biotinyl group is reported. The dATP analogue is converted into the biotinylated derivative which is a substrate for DNA polymerase.