Cut Flower Production Research Articles

Preharvest melatonin application mitigates arsenic-induced oxidative stress and improves vase life of tuberose (Polianthes tuberosa L.) cut flowers

Arsenic (As) stress severely hinders the growth of ornamental cut flowers. Melatonin (MLT) as a biostimulant protects plants from various abiotic stresses including As stress. However, its protective roles are not well understood in ornamental cut flowers especially tuberose. This research investigated the effects of exogenous melatonin supplementation on alleviating As stress damage in tuberose plants. In As-treated plants, growth traits and leaf chlorophyll contents markedly decreased, while application of MLT, alleviated the inhibitory effect of As on plant growth and chlorophyll content in As-treated plants. Melatonin application considerably increased the vase life of cut tuberose flowers and also improved the protein as well as proline contents in leaf tissues. Level of oxidative markers including electrolyte leakage (EL), malondialdehyde (MDA) and hydrogen peroxide (H2O2) increased in As-treated plants. Upon application of MLT, this trend was alleviated; however, the activities of enzymatic antioxidants increased when plants were subjected to As stress in combination with MLT. Results obtained in the present study suggest that exogenous MLT could alleviate negative effects of As stress on tuberose plants stimulating of oxidative defense related antioxidants. These results are beneficial to improve ornamental tuberose cut flowers production in heavy metal polluted soils or irrigation water.

SMART AND INTELLIGENT PRODUCTION STRATEGY FOR THE FLOWER MARKET USING DATA MINING KNOWLEDGE-BASED DECISION

The agriculture industry has been an enormous economic pillar in the production and consumption market value chain. The agriculture industry resets flower production factors with the agricultural technology revolution. The fastest technology provides innovative and intelligent decision-making strategies in seasonal cut flowers to increase production. This study briefs out existing farming practices, chain activity and farming technology’s significant impacts on the agriculture field and garden industry. Authors try to investigate cut flower production status and analyze production values to design innovative and intelligent strategies, especially for seasonal flower production. The study employs a flower dataset; hence, it applies floral parameter inputs and data mining association rules to create an output of the flower production category, which fits appropriately to evaluate flower market production value in a particular season. The article's result reveals that the proposed flower production strategy provides efficient and intelligent guidelines to increase flower production according to market demand. This study suggests an intelligent and friendly production strategy for gardeners that indicates the flower market gets continuous and quality production to meet consumers’ immediate market demand.

Comparison of Dahlia Cultivars for Cut Flower Production in the Northeastern United States

Dahlias (Dahlia ×hybrida) are a popular cut flower for local production in the northeastern United States. However, there are more than 20,000 cultivars to choose from, and the suitability of these cultivars as cut flowers varies regionally. Fourteen dahlia cultivars were grown in Orono, ME, USA: Blizzard, Burlesca, Café au Lait, Café au Lait Rose, Clearview Daniel, Cornel, Cornel Bronze, Ivanetti, Lollipop, Neon Splendor, Rock Run Ashley, Sunspot, Tanjoh, and Tempest. These cultivars were selected after interviews with local dahlia growers. These cultivars all produced similar numbers of flowers, but they differed in the time to form flowers, stem length, and stem diameter. ‘Rock Run Ashley’ was the earliest to begin flowering, at 35 days earlier than ‘Tempest’ and ‘Café au Lait’, which flowered last. ‘Blizzard’ and ‘Tempest’ had the longest stems and ‘Lollipop’ had the shortest stems. Growers may want to choose ‘Rock Run Ashley’ if they need flowers earlier in the season, or ‘Blizzard’ or ‘Tempest’ if a longer stem length is desired. During a second study, we harvested field-grown flowers of ‘Burlesca’, ‘Cornel’, and ‘Ivanetti’ and treated them with deionized water or one of two commercial holding solutions. Holding solutions did not extend the vase life of ‘Burlesca’ or ‘Ivanetti’, but they increased the vase life of ‘Cornel’ by 4 or 5 days.

Effect of sediment-based growing media on cut flower production of calla lily

Effect of sediment-based growing media on cut flower production of calla lily

Estudo bibliométrico da pesquisa sobre flores de corte

Abstract Ornamental plants play a fundamental role in diverse applications, from cut flower production to landscape design and space decoration. The ornamental industry, which is part of horticulture, has experienced significant advances and mobilizes billions of dollars in the global economy, being also a totally globalized market. In recent years, this industry has implemented advanced production strategies, from genetic improvement to sustainability and supply chain, promoting scientific research in various areas. However, the dispersion of knowledge has hindered the integration of the various research networks. Therefore, this article seeks to provide an overview of the scientific production in the cut flower sector, establishing a reference line for researchers, using bibliometrics as a tool to identify trends and the scientific structure of this area of knowledge. The results revealed that worldwide since 1983 there have been 975 articles focused on this productive system, gene rated in more than 69 countries by 2750 authors who published their research in 160 academic journals. Relevant research topics that are already developed and those that need a more intense and integrated research focus on the knowledge already generated were also identified.

Adopter Categorization and Level of Adoption among Protected Cut Flower Growers

In India, Tamil Nadu occupies the first position in terms of area under flower cultivation then followed by Karnataka and West Bengal. Out of the 33 districts in Tamil Nadu, Krishnagiri district ranks first in cut flower production due to its suitability to climatic conditions. The cut flowers are by and large cultivated under protected conditions (poly greenhouse structure) to meet the quality standards as expected in the global trade arena. The present study was conducted to identify the adopter categories and their level of adoption with respect to protected cut flower cultivation technologies. An ex-post facto research design was used for the study. The first two intensive blocks (Thally & Hosur) cultivating cut flowers under protected methods were purposefully selected for the present study. From both blocks, six villages were selected, and the data were collected from 120 respondents among these twelve selected villages using a well-structured interview schedule. The collected data were analyzed using mean, standard deviation, cumulative frequency, and principal component analysis (PCA). The results of the adopter categorization showed that 40.83 percent of respondents belonged to the early majority and only 5.00 percent were innovators. The results regarding the overall adoption of protected cultivation by each adopter category reported that 54.17 percent of respondents had medium-level adoption, in that 44.61 percent and 30.77 percent were early majority and late majority, respectively. The majority of respondents have a medium-level adoption of protected cultivation, leaving potential for growth among early majority and late majority adopters. Targeted strategies and incentives should address their specific needs, and encouraging more innovators to adopt can drive widespread adoption.

How far can omics go in unveiling the mechanisms of floral senescence?

Floral senescence is of fundamental interest in understanding plant developmental regulation, it is of ecological and agricultural interest in relation to seed production, and is of key importance to the production of cut flowers. The biochemical changes occurring are well-studied and involve macromolecular breakdown and remobilisation of nutrients to developing seeds or other young organs in the plant. However, the initiation and regulation of the process and inter-organ communication remain to be fully elucidated. Although ethylene emission, which becomes autocatalytic, is a key regulator in some species, in other species it appears not to be as important. Other plant growth regulators such as cytokinins, however, seem to be important in floral senescence across both ethylene sensitive and insensitive species. Other plant growth regulators are also likely involved. Omics approaches have provided a wealth of data especially in ornamental species where genome data is lacking. Two families of transcription factors: NAC and WRKY emerge as major regulators, and omics information has been critical in understanding their functions. Future progress would greatly benefit from a single model species for understanding floral senescence; however, this is challenging due to the diversity of regulatory mechanisms. Combining omics data sets can be powerful in understanding different layers of regulation, but in vitro biochemical and or genetic analysis through transgenics or mutants is still needed to fully verify mechanisms and interactions between regulators.

Postharvest strategies for preventing flower wilting and leaf yellowing in cut Ranunculus flowers

IntroductionAppropriate postharvest treatment, as well as adequate conditions of storage, can be adopted to elongate the lifespan of cut flowers. Thidiazuron (TDZ), a substituted phenylurea, and 1-methylcycloproene (1-MCP), a non-toxic inhibitor of ethylene perception, are nowadays substances commonly used to prevent early damage caused by senescence and to delay chlorophyll degradation. Ranunculus asiaticus L. is cultivated for cut flower production and is highly sensitive to ethylene and leaf yellowing. In this study, the effect of different pulse-tratment in prolonging cut ranunculus vase life was analyzed.MethodsTDZ 10 µM, 1-MCP 500 ppb, and a combination of both were applied for 24 hours after harvest. The effect of the treatments was evaluated by performing non-destructive (% loss of fresh weight, chlorophyll a fluorescence, in vivo chlorophyll content, and Nitrogen Flavonol Index – NFI) and destructive (chlorophyll, carotenoids, anthocyanins concentration, and phenolic index) analyses at 0, 1, 12, and 14 days from treatments. Results and DiscussionFlower wilting was delayed by 4 days in 1-MCP + TDZ 10 µM treatments, which also reduced weight loss and chlorophyll degradation compared to controls. The effectiveness of these compounds in preventing senescence has been confirmed by the decreased biosynthesis of phenolic compounds.

First report of plumeria mosaic virus infecting Plumeria spp. in the United States.

Plumeria (Plumeria spp.) is a small ornamental tree grown in subtropical and tropical areas, providing shade and attractive and fragrant flowers in public and private landscapes. In Hawaii, plumeria is also commercially grown, with flowers harvested for cut flower and lei production. In 2019, a total of 10 cut flower plumeria farms in Hawaii sold 7,356,702 blossoms, valued at $395,791 (USDA/NASS). In July 2021, a commercial plumeria farm in Maui County, Hawaii reported trees with flowers exhibiting color breaking, and leaves with mosaic and vein banding. To determine if a viral pathogen was present, leaf tissue from a symptomatic plant was processed using a Double-RNA Viral dsRNA Extraction Kit for plant tissue (iNtRON Biotechnology, Korea), followed by random amplification (Melzer et al. 2010). The resulting products underwent paired-end sequencing on a MiSeq platform (Illumina, CA) at the Advanced Studies in Genomics, Proteomics, and Bioinformatics laboratory at the University of Hawaii. Of the 2,913,913 paired-end 300-bp reads generated, Geneious Prime (Biomatters, New Zealand) mapped 350,686 to plumeria mosaic virus (PluMV; KJ395757.1) and 293,911 to frangipani mosaic virus (FrMV; JN555602.2), with mean coverage depths of 10,318 and 7,348 respectively. A 6,648 nt contig representing the near full-length genome of PluMV-HI (OP342599) was found to be >97% identical to PluMV isolates PluMV-DR_TW (KX881422.2) and PluMV-Plu-Ind-1 (KJ395757.1). Similarly, a 6,631 nt contig representing the near full-length genome of FrMV-HI (OP342600) was found to be >98% identical to FrMV isolates FrMV-P (Lim et al. 2010; HM026454.1) and FrMV-Fr-Ind-1 (Kumar et al. 2015; JN555602.2). Bioinformatic analyses (Olmedo-Velarde et al. 2019) of the reads that did not map to PluMV and FrMV suggested the presence of a novel ampelovirus and reovirus in the tissue. To confirm the presence of PluMV and FrMV in Hawaii, leaves were collected in June 2022 from 5 plumeria trees on the Maui County farm and 16 ornamental plumeria trees from Honolulu County. Total RNA extracted as described by Li et al. (2008) as well as non-template (water) and positive (HTS tissue sample) controls underwent RT-PCR using random primers for cDNA synthesis, followed by virus-specific primers for PluMV (1133: 5'-TGGGCAAATAATCCGGCTATAC-3'/1134: 5'CCGGAGAGAGCATCAAACAA-3') and FrMV (1129: 5'-TGAGTTTAGGTCGCAGTTGATAG-3'/1130: 5-'AAAGACCAGAACCTCCAGAAAG-3') in singleplex reactions. The results indicated that all 5 plumeria samples from Maui County were positive for both PluMV and FrMV, whereas 6 out of 16 plumeria samples collected from Honolulu County tested positive for PluMV only. Both PluMV and FrMV are tobamoviruses (Virgaviridae) that can be transmitted mechanically and spread through the introduction and/or movement of cuttings, the primary method of plumeria propagation. Both PluMV and FrMV cause leaf mosaic (Kumar et al. 2015; Lim et al. 2010; Lin et al. 2020) and FrMV may also cause color break or "splash" in flowers, which was observed at the Maui County farm. This represents the first report of PluMV in the USA. FrMV was detected in Florida (Dey et al. 2020), but this is the first report of the virus in Hawaii. Additional surveys are required to determine the incidence of both viruses in other counties of Hawaii. The putative discovery of a novel ampelovirus and reovirus in plumeria warrants further research to characterize these agents and determine their distribution and impact on plumeria health.

Green synthesis of silver nanoparticles using Eucommia ulmoides leaf extract for inhibiting stem end bacteria in cut tree peony flowers.

Tree peony ( Paeonia suffruticosa Andr.) is a popular cut flower among ornamental plants. However, its short vase life severely hinders the production and application of cut tree peony flowers. To extend the postharvest longevity and improve the horticultural value, silver nanoparticles (Ag-NPs) was applied for reducing bacterial proliferation and xylem blockage in cut tree peony flowers in vitro and in vivo. Ag-NPs was synthesized with the leaf extract of Eucommia ulmoides and characterized. The Ag-NPs aqueous solution showed inhibitory activity against bacterial populations isolated from stem ends of cut tree peony 'Luoyang Hong' in vitro. The minimum inhibitory concentration (MIC) was 10 mg L-1. Compared with the control, pretreatments with Ag-NPs aqueous solution at 5 and 10 mg L-1 for 24h increased flower diameter, relative fresh weight (RFW), and water balance of tree peony 'Luoyang Hong' flowers. Additionally, malondialdehyde (MDA) and H2O2 content in pretreated petals were lower than the control during the vase life. The activities of superoxide dismutase (SOD) and catalase (CAT) in pretreated petals were lower than that of the control at the early vase stage and higher at the late vase life. Furthermore, pretreatments with Ag-NPs aqueous solution at 10 mg L-1 for 24h could reduce bacterial proliferation in the xylem vessels on the stem ends by confocal laser scanning microscope (CLSM) and scanning electron microscope (SEM). Overall, pretreatments with green synthesized Ag-NPs aqueous solution effectively reduced bacteria-induced xylem blockage of cut tree peony, resulting in improved water uptake, extended vase life, and enhanced postharvest quality. Therefore, this technique can be used as a promising postharvest technology in the cut flower industry.

The Dendrobium Orchid: Botany, horticulture, and utilization

AbstractDendrobium, one of the largest genera of tropical orchids, is grown commercially on a large scale with an important economic impact in several ASEAN countries.Dendrobiumorchids can be grown in a wide range of climates, but flower production is best under tropical conditions. Due to being the most popular orchid for cut flower production, many hybrids ofDendrobiumhave been produced with colorful and attractive blooms. Cut flowers ofDendrobiumare popular worldwide. In addition, manyDendrobiumcultivars can be grown as flowering potted plants and for other purposes such as in medicinal applications and for use in decorative products. Postharvest physiology and technology are important in maintaining the quality of both cut flowers and potted plants from production sites to the marketplace. Plants of theDendrobiumgenus also contain a wide diversity of bioactive compounds that can be developed into medicinal and cosmetic products. This review describes the botany, cultivation, postharvest physiology, handling and utilization ofDendrobium.

Effect of the pectin contents and nanostructure on the stem straightness of two Paeonia lactiflora cultivars.

Herbaceous peony (Paeonia lactiflora Pall.) is an ancient ornamental crop and, in recent decades, an emerging popular cut flower. Straight stems are a vital criterion for cut herbaceous peony selection, while many cultivars bend as the plant develops. Pectin helps maintain the mechanical strength of the cell wall. However, little is known about its role in the stem bending of herbaceous peony. Two herbaceous peony cultivars with contrasting stem morphologies ('Dong Fang Shao Nv', upright; 'Lan Tian Piao Xiang', bending gradually) at five developmental stages were used as materials to investigate the effects of pectin content and nanostructure on straightness using the carbazole colorimetric method and atomic force microscopy observations. The contents of water-soluble pectin (WSP), CDTA-soluble pectin (CSP), and sodium carbonate-soluble pectin (SSP) differed significantly between the two cultivars, and the contents and angle of the flower and branch showed correlations. For the pectin nanostructure, WSP showed agglomerates and long chains, with a higher proportion of broad agglomerates at the later stages of the bending cultivar than the upright cultivar. CSP showed branched chains, and the proportion of broad chains was higher in the upright cultivar at later stages, while CSP shape changed from agglomerates to chains in the bending cultivar. SSP mainly consisted of short linear main chains, and side chains in the upright stem were stacked, and the bent cultivar had more broad and short chains. It can be concluded that the contents, nanometric shape, and size of the three kinds of pectin are highly likely to affect herbaceous peony stem straightness. This study provides a theoretical basis for the role of pectin in the production and breeding of herbaceous peony cut flowers.

Effect of light quality of long-day treatments on flowering in <i>Delphinium</i>

The effects of light quality on the flowering need to be investigated for the efficient use of light-emitting diodes (LEDs) in cut flower production because of the environmentally friendly features of LEDs. Assuming long-day treatments in cut flower production, we used Delphinium species, popular long-day plants, and treated the plants at night with relatively weak light to investigate the effects of light quality. We used reproductive experimental conditions with phytotrons and long-day treatments, mainly monochromatic light, to establish an experimental system to elucidate physiological and molecular mechanisms in the near future. Before investigating the effect of monochromatic light, we first performed a long-day treatment with a widely used white LED. A similar effect to the incandescent lamp on bolting was observed, suggesting the possibility that red or blue light, but not far-red light, are adequate to promote flowering from the spectra of both light sources. Next, long-day treatments were performed with LEDs emitting monochromatic blue, red, and far-red light. In the model plant Arabidopsis thaliana, flowering is well known to be promoted by far-red and blue light and inhibited by red light. However, long-day treatment with red light for Delphinium effectively promoted flowering. Treatment with far-red light, which shows an opposite flowering response to red light in A. thaliana, also promoted the flowering of Delphinium. As for blue light, the flower budding rate of D. grandiflorum reached 100%, and that of D. elatum was lower. Compared to far-red and blue lights, long-day treatment with red light did not negatively impact cut flower quality, including cut flower length and number of florets. Our results on light quality impact on flowering response will contribute to technology for regulating Delphinium flowering and potentially also lead to the elucidation of the mechanism of unique flowering promotion by red light.

Effect of Substrate, Growth Condition and Nutrient Application Methods in Morphological and Commercial Attributes of Hybrid Rose (Rosa indica L.) Cv. Kardinal

Rose is an important plant around the world. The largest trader of rose cut-flower and hybrid varieties is Netherland. Countless varieties are introduced in agriculture business for commercial production. While countless soil and soilless substrates are also utilized for commercial production of rose around the globe. Due to that it is important to standardize and see the best soil or soilless substrate for better production of commercial cut-flowers in Rose. Various soil substrates and growing environment (Under partial shade, 70% sunlight and open sun light) was observed for better commercial yield in Rose. The balance fertilizer was applied in both A: Foliar spray (300:300:300 ppm of NPK) along with the various soil substrates of GS: PR: CCD (1:1:1), GS: LC (1:1), GS: PR (100%) and FYM: SL: CL (1:1:1). The liquid substrate was distilled water for foliar application. The foliar application was done after each day. The other nutrient application process was B: soil application of macro nutrient (2g/L of 17:17:17-NPK) along with GS: PR: CCD (1:1:1), GS: LC (1:1), GS: PR (100%) and FYM: SL: CL (1:1:1). Each plant was saturated with 2 days interval. The fertigation was carried by mixing above mentioned fertilizer with the canal water having EC: 0.4 dSm-1 and pH: 6.9 pH. The performance of plants was observed by observing the attributes such as Plant survival (%), Number of flowers per plant, Plowers stem length (cm), Plant health (Number of leaves, leaf size (cm), Flower diameter (mm), Flower stem size (mm) and Flower stem diameter (mm). Completely randomized experimental design (CRD) was used for calculating means of various treatments. The best treatment was FYM: SL: CL for both under partial shade (70%) and open sun light for the significant growth and development of plant morphological and commercial attributes. The same treatment with soil application of 2g/L of NPK (17:17:17) after each day is recommended to the commercial growers of Rose throughout the flowering season.

Persistence Patterns and Intensity of Leaf Rust Disease in Chrysanthemum Production Systems

This study aims to determine the conditions of chrysanthemum cultivation, the pattern of distribution of chrysanthemum leaf rust disease (persistence), the development of disease symptoms, and the intensity of chrysanthemum leaf rust disease at the cut flower production center in the Special Region of Yogyakarta (Sleman and Kulonprogo). The results showed that chrysanthemum farming in DI Yogyakarta is cultivated on a flat to hilly topography, and the cultivation method is simple and conventional in a plastic house (gauze). Rust disease caused by Puccinia horiana is found in Sleman and Kulonprogo Regency with varying degrees of severity. Chrysanthemum rust disease has random disease distribution which means that the cause of the disease is dispersed by the wind or by seeds. P. horiana spores are dispersed by the wind and can be caught with Kiyosawa-type spore traps at an altitude of 0.5-1.5 m from the soil surface. The highest intensity of chrysanthemum leaf rust disease is found in dense/lush plantings in susceptible varieties in Pakem Sleman at an elevation of 900 m above sea level by 85% and Samigaluh Kulonprogo at an elevation of 650 m above sea level by 58%.

Efisiensi Pemasaran Bunga Potong Krisan di Kabupaten Cianjur

Chrysanthemum cur flowers have many benefits in that they can be used for flower bouquets, pollution absorbers, and even traditional medicinal plants. One of the national chrysanthemum cutting flower centers is in Cianjur Regency, which contributes 53% of total production for West Java Province. Every year, this high production of cut flowers is also followed by higher price differences between the farmer and final seller levels. This study aims to analyze the efficiency of chrysanthemum cut flower marketing in Cianjur Regency. Respondents included farmers, collectors, wholesalers, and florists. Marketing efficiency was analyzed using the composite index method and the Acharya & Aggarwal method, using three indicators: marketing margin, farmer's share, and marketing costs. There are three marketing channels in Cianjur Regency, namely (1) farmers–collectors–wholesalers–consumers, (2) farmers– wholesalers–consumers, and (3) farmers–florists–consumers. The most efficient marketing channel is channel 2, with the lowest index, 1, and based on the Acharya & Aggarwal method, channel 2 has the highest efficiency value, 1.14. Therefore, it can be concluded that farmers' most preferred marketing channel is channel 1 (collectors), which is not the most efficient channel. Preferably, the farmers choose channel 2 (wholesalers) to sell the harvest of their chrysanthemum cut flowers so as not to rely on collectors.
 
 Keywords: farmer's Saham, marketing channel, marketing margin

Anemone Cut Flower Timing, Yield, and Quality in a High-Elevation Field and High Tunnel

A narrow window of optimal spring temperatures limits anemone (Anemone coronaria L.) cut flower production in the US Intermountain West, where fall plantings risk winter injury and spring plantings are limited by summer dormancy. Regional management recommendations are needed to improve anemone harvest timing and yield for growers in USDA hardiness zones 6 and below (average annual minimum temperatures below −18 °C). The aim of this research was to optimize flower timing, yield, quality, and profitability in high tunnel and field production systems by evaluating planting dates, winter insulation, tuber preparation, and cultivar selection. High tunnel and field trials were conducted from fall 2020 to spring 2022 in North Logan, UT (41.767° N, −111.811° W, 1405 m elevation, USDA hardiness zone 5). Tubers were pre-sprouted or directly planted into a high tunnel (left bare or covered with low tunnels) or field (left bare or covered with mulch, a low tunnel, or mulch and a low tunnel) from November to April. Harvest began as early as 2 March in the high tunnel and 9 April in the field, with overall average marketable yields (stems per m2 ± SE) of 142 ± 7 in the high tunnel and 85 ± 4 in the field. Planting pre-sprouted tubers under low tunnels in the high tunnel in November delivered the earliest harvest (2 March), greatest marketable yield (280 stems per m2 ± 73 SE), and greatest net returns ($38 per m2). For November field plantings, insulation improved emergence by 75% and marketable yield by 77 stems per m2 ± 15 SE. Combining high tunnel and field production with the season advancement techniques of fall planting dates, low-cost insulation, and pre-sprouting resulted in high total yields in the Intermountain West compared to traditional industry recommendations.

Overwintering Improves Ranunculus Cut Flower Production in the US Intermountain West

Ranunculus (Ranunculus asiaticus L.) cut flower production in the US Intermountain West is limited by a narrow window of optimal temperature ranges in the spring. With the increasing number of Intermountain West cut flower growers, regional management recommendations are needed to improve ranunculus harvest timing and yield. The objectives of this research were to evaluate planting dates, winter insulation, tuberous root (TR) preparation, and cultivar selection for flower timing, yield, quality, and profitability in high tunnel and field production systems. Trials were conducted in a North Logan, UT (41.7665° N, −111.811° W, 1405 m elevation, USDA hardiness zone 5) high tunnel and field from fall 2019 to spring 2022. TRs were either pre-sprouted or directly planted into a high tunnel (left bare or covered with low tunnels) or field (left bare or covered with mulch, a low tunnel, or mulch and a low tunnel) from November to April. High tunnels advanced production by four weeks, nearly doubled total yield, and increased the proportion of quality (longer than 25 cm) stems by 50% compared to the field. Planting pre-sprouted TRs in the high tunnel in November delivered the earliest harvest (6 Apr.), highest marketable yield (286 stems per m2 ± 36 SE), and highest net returns ($54 per m2), with 39% greater marketable yield for ‘LaBelle’ than ‘Amandine.’ Insulation nearly doubled emergence and improved marketable yield by 49 stems per m2 ± 8 SE for November field plantings. Ranunculus production was optimized as a fall-planted high tunnel crop in the Intermountain West but may be fall-planted in the field with insulation, allowing growers to maximize production during more optimal, early-season temperatures.

Influence of clay soil on two Leucospermum cultivars planted directly or grafted on clay-soil resistant rootstock – study of plant growth and cut flowers production

ISHS XIV International Protea Research Symposium Influence of clay soil on two Leucospermum cultivars planted directly or grafted on clay-soil resistant rootstock – study of plant growth and cut flowers production

The Slow Flower Movement – exploring alternative sustainable cut-flower production in a Swedish context

This study critically analyses the emerging Slow Flower Movement in a Swedish context. Analysis is conducted by using the Triple-layered Business Model Canvas, covering economic, social and environmental sustainability values. Data are collected (Spring 2021) through semi-structured interviews, observations of cultivation and use of social media. Analysis and coding were conducted by applying thematic analysis. The results show that consumer demand and market for domestic cut-flowers are increasing; however, the development is hindered by small scale production, low profitability and demanding work conditions. Results also show that produce, in line with the Slow Flower Movement, provides unique sustainable values: contribution to biodiversity, a different and unique assortment, functions as a meeting point, and contributes to the local culture, landscape and society. Social media represent a crucial tool in sales, marketing and communication, as well as in the overall development of the movement. Highlighting how these technological communication platforms constitute a foundation for the movement's establishment. The avoidance of technical production aid in the cultivation is regarded as a main hindrance to developing the firms and profitability. By initiating knowledge exchange between conventional growers and the emerging Slow Flower Movement, both parties are expected to gain advantages of a transformation towards a mutual development of sustainable domestic cut-flower production.