Cultured Mouse Fibroblasts Research Articles

Chitosan-Integrated Curcumin-Graphene Oxide/Copper Oxide Hybrid Nanocomposites for Antibacterial and Cytotoxicity Applications.

This study deals with the facile synthesis of a single-pot chemical technique for chitosan-curcumin (CUR)-based hybrid nanocomposites with nanostructured graphene oxide (GO) and copper oxide (CuO) as the antibacterial and cytotoxic drugs. The physicochemical properties of synthesized hybrid nanocomposites such as CS-GO, CS-CuO, CS-CUR-GO, and CS-CUR-GO/CuO were confirmed with various advanced tools. Moreover, the in vitro drug release profile of the CS-CUR-GO/CuO nanocomposite exhibited sustained and controlled release during different time intervals. Also, the antibacterial activity of the CS-CUR-GO/CuO hybrid nanocomposite presented the maximum bactericidal effect against Staphylococcus aureus and Escherichia coli pathogens. The hybrid nanocomposites revealed improved cytotoxicity behaviour against cultured mouse fibroblast cells (L929) via cell adhesion, DNA damage, and proliferation. Thus, the chitosan-based hybrid nanocomposites offer rich surface area, biocompatibility, high oxidative stress, and bacterial cell disruption functionalities as a potential candidate for antibacterial and cytotoxicity applications.

Isolation of High-Purity Betanin from Red Beet and Elucidation of Its Antioxidant Activity against Peroxynitrite: An in vitro Study.

Reactive oxygen species and reactive nitrogen species (RNS) are damaging for many biomolecules. Peroxynitrite (ONOO-) is the most toxic molecular species among RNS. Betalains are known to possess ONOO- scavenging ability. Betanin, a betalain isolated from red beet, possesses antioxidant, anti-inflammatory, and antitumor activities; however, detailed studies of this isolated pigment have not been conducted, owing to its instability under physiological conditions. This study aimed to isolate highly purified betanin from red beetroots using an improved purification method involving deproteinization and citric acid co-precipitation and evaluated its antioxidant activities. The purified betanin thus obtained had a significantly lower isobetanin content than the commercially available betanin dyes. The antioxidant activity of purified betanin examined in the 2,2-diphenyl-1-picrylhydrazyl assay, the direct ONOO- reaction, ONOO--dependent DNA damage, and lipid peroxidation reactions revealed that betanin possessed higher antioxidant capacity than general antioxidants such as ascorbic acid and quercetin. Furthermore, betanin showed indirect and direct cytoprotective effects against H2O2 and ONOO- cytotoxicity, respectively, in cultured mouse fibroblasts. To the best of our knowledge, this is the first study to demonstrate the cytoprotective effects of betanin against ONOO- toxicity. The highly purified betanin obtained in this study will aid in further exploring its physiological functions.

In Vivo and In Vitro Analysis of Toxicity of a Prospective Magnetic Resonance Contrast Agent Based on Arabinogalactan and Gadolinium Nanocomposite.

We studied the cytotoxic effect of gadolinium nanocomposite on cultured mouse fibroblasts 3T3-SV40 and histological changes in the liver tissue of albino rats after its administration. For in vitro experiment, gadolinium nanocomposite on the natural matrix of arabinogalactan (nGd-AG) was dissolved in DMEM nutrient medium to concentrations of 0.005, 0.02, 0.5, 2, and 5 mM. In in vivo experiment, a nGd-AG solution was orally administered to rats through a tube in a dose of 500 μg Gd/kg in 1 ml of 0.9% NaCl for 10 days. The pattern and degree of influence of the gadolinium nanocomposite on the studied cell culture depended on the concentration and duration of exposure. IC50 of nGd-AG determined after cell incubation for 24, 48, and 72 h were 616 μg/kg (3.9 mM), 302 μg/kg (1.9 mM), and 222 μg/kg (1.4 mM), respectively. Histological changes in the liver of white rats induced by exposure to nanocomposite attested to the development of a compensatory reaction of the organ.

Biodegradable Polyhydroxyalkanoates Formed by 3- and 4-Hydroxybutyrate Monomers to Produce Nanomembranes Suitable for Drug Delivery and Cell Culture

Biodegradable polyhydroxyalkanoates, biopolymers of microbiological origin, formed by 3- and 4-hydroxybutyrate monomers P(3HB-co-4HB), were used to obtain nanomembranes loaded with drugs as cell carriers by electrospinning. Resorbable non-woven membranes from P(3HB-co-4HB) loaded with ceftazidime, doripinem, and actovegin have been obtained. The loading of membranes with drugs differently affected the size of fibers and the structure of membranes, and in all cases increased the hydrophilicity of the surface. The release of drugs in vitro was gradual, which corresponded to the Higuchi and Korsmeyer-Peppas models. Antibiotic-loaded membranes showed antibacterial activity against S. aureus and E. coli, in which growth inhibition zones were 41.7 ± 1.1 and 38.6 ± 1.7 mm for ceftazidime and doripinem, respectively. The study of the biological activity of membranes in the NIH 3T3 mouse fibroblast culture based on the results of DAPI and FITC staining of cells, as well as the MTT test, did not reveal a negative effect despite the presence of antibiotics in them. Samples containing actovegin exhibit a stimulating effect on fibroblasts. Biodegradable polyhydroxyalkanoates formed by 3-hydroxybutyrate and 4-hydroxybutyrate monomers provide electrospinning non-woven membranes suitable for long-term delivery of drugs and cultivation of eukaryotic cells, and are promising for the treatment of wound defects complicated by infection.

Methacrylate Cationic Nanoparticles Activity against Different Gram-Positive Bacteria.

Nanotechnology is a developing field that has boomed in recent years due to the multiple qualities of nanoparticles (NPs), one of which is their antimicrobial capacity. We propose that NPs anchored with 2-(dimethylamino)ethyl methacrylate (DMAEMA) have antibacterial properties and could constitute an alternative tool in this field. To this end, the antimicrobial effects of three quaternised NPs anchored with DMAEMA were studied. These NPs were later copolymerized using different methylmethacrylate (MMA) concentrations to evaluate their role in the antibacterial activity shown by NPs. Clinical strains of Staphylococcus aureus, S. epidermidis, S. lugdunensis and Enterococcus faecalis were used to assess antibacterial activity. The minimal inhibitory concentration (MIC) was determined at the different concentrations of NPs to appraise antibacterial activity. The cytotoxic effects of the NPs anchored with DMAEMA were determined in NIH3T3 mouse fibroblast cultures by MTT assays. All the employed NPs were effective against the studied bacterial strains, although increasing concentrations of the MMA added during the synthesis process diminished these effects without altering toxicity in cell cultures. To conclude, more studies with other copolymers are necessary to improve the antibacterial effects of NPs anchored with DMAEMA.

CXCL9 Links Skin Inflammation and Fibrosis through CXCR3-Dependent Upregulation of Col1a1 in Fibroblasts

Morphea is characterized by initial inflammation followed by fibrosis of the skin and soft tissue. Despite its substantial morbidity, the pathogenesis of morphea is poorly studied. Previous work showed that CXCR3 ligands CXCL9 and CXCL10 are highly upregulated in the sera and lesional skin of patients with morphea. We found that an early inflammatory subcutaneous bleomycin mouse model of dermal fibrosis mirrors the clinical, histological, and immune dysregulation observed in human morphea. We used this model to examine the role of the CXCR3 chemokine axis in the pathogenesis of cutaneous fibrosis. Using the REX3 (Reporting the Expression of CXCR3 ligands) mice, we characterized which cells produce CXCR3 ligands over time. We found that fibroblasts contribute the bulk of CXCL9-RFP and CXCL10-BFP by percentage, whereas macrophages produce high amounts on a per-cell basis. To determine whether these chemokines are mechanistically involved in pathogenesis, we treated Cxcl9-, Cxcl10-, or Cxcr3-deficient mice with bleomycin and found that fibrosis is dependent on CXCL9 and CXCR3. Addition of recombinant CXCL9 but not CXCL10 to cultured mouse fibroblasts induced Col1a1 mRNA expression, indicating that the chemokine itself contributes to fibrosis. Taken together, our studies provide evidence that CXCL9 and its receptor CXCR3 are functionally required for inflammatory fibrosis.

Impedance Measurement for the Monitoring of In Vitro Cells Cultured in the Presence of Electromagnetic Waves

This paper explores the possibility of using the impedance measurement method used to monitor morphological changes in culture cells for use in cultures in the presence of an electromagnetic field generated by a mobile phone. For this purpose, we used Electric Cell–Substrate Impedance Sensing (ECIS), which is a real-time, label-free, impedance-based method to study cell behaviors in tissue culture. As part of the work, a device enabling the connection in a climatic chamber was prepared without the need to interfere with environmental conditions, and a test culture of mouse fibroblasts was performed. The device based on the Arduino UNO programmable platform worked like a mobile phone. During cell proliferation, it was connected to the device three times and a change in electrical parameters in the measuring system was observed. During the phone call, there was a clear change in the values of the measured parameters. However, analysis of the obtained results indicated that there was little or no effect of the presence of the electromagnetic field on the cell culture, while the observed changes in the values of impedance, resistance, and capacitance are most likely due to the separation of positive and negative medium ions in the electromagnetic field. The application of the presented method seems possible; however, in order to eliminate the separation of ions, a different type of antenna should be designed to emit a homogeneous field to the entire well.

Composite Coating for the Food Industry Based on Fluoroplast and ZnO-NPs: Physical and Chemical Properties, Antibacterial and Antibiofilm Activity, Cytotoxicity

Bacterial contamination of meat products during its preparation at the enterprise is an important problem for the global food industry. Cutting boards are one of the main sources of infection. In order to solve this problem, the creation of mechanically stable coatings with antibacterial activity is one of the most promising strategies. For such a coating, we developed a composite material based on "liquid" Teflon and zinc oxide nanoparticles (ZnO-NPs). The nanoparticles obtained with laser ablation had a rod-like morphology, an average size of ~60 nm, and a ζ-potential of +30 mV. The polymer composite material was obtained by adding the ZnO-NPs to the polymer matrix at a concentration of 0.001-0.1% using the low-temperature technology developed by the research team. When applying a composite material to a surface with damage, the elimination of defects on a micrometer scale was observed. The effect of the composite material on the generation of reactive oxygen species (H2O2, •OH), 8-oxoguanine in DNA in vitro, and long-lived reactive protein species (LRPS) was evaluated. The composite coating increased the generation of all of the studied compounds by 50-200%. The effect depended on the concentration of added ZnO-NPs. The antibacterial and antibiofilm effects of the Teflon/ZnO NP coating against L. monocytogenes, S. aureus, P. aeruginosa, and S. typhimurium, as well as cytotoxicity against the primary culture of mouse fibroblasts, were studied. The conducted microbiological study showed that the fluoroplast/ZnO-NPs coating has a strong bacteriostatic effect against both Gram-positive and Gram-negative bacteria. In addition, the fluoroplast/ZnO-NPs composite material only showed potential cytotoxicity against primary mammalian cell culture at a concentration of 0.1%. Thus, a composite material has been obtained, the use of which may be promising for the creation of antibacterial coatings in the meat processing industry.

Resorbable Nanomatrices from Microbial Polyhydroxyalkanoates: Design Strategy and Characterization.

From a series of biodegradable natural polymers of polyhydroxyalkanoates (PHAs)-poly-3-hydroxybutyrate (P(3HB) and copolymers containing, in addition to 3HB monomers, monomers of 3-hydroxyvalerate (3HV), 3-hydroxyhexanoate (3HHx), and 4-hydroxybutyrate (4HB), with different ratios of monomers poured-solvent casting films and nanomembranes with oriented and non-oriented ultrathin fibers were obtained by electrostatic molding. With the use of SEM, AFM, and measurement of contact angles and energy characteristics, the surface properties and mechanical and biological properties of the polymer products were studied depending on the method of production and the composition of PHAs. It has been shown in cultures of mouse fibroblasts of the NIH 3T3 line and diploid human embryonic cells of the M22 line that elastic films and nanomembranes composed of P(3HB-co-4HB) copolymers have high biocompatibility and provide adhesion, proliferation and preservation of the high physiological activity of cells for up to 7 days. Polymer films, namely oriented and non-oriented nanomembranes coated with type 1 collagen, are positively evaluated as experimental wound dressings in experiments on laboratory animals with model and surgical skin lesions. The results of planimetric measurements of the dynamics of wound healing and analysis of histological sections showed the regeneration of model skin defects in groups of animals using experimental wound dressings from P(3HB-co-4HB) of all types, but most actively when using non-oriented nanomembranes obtained by electrospinning. The study highlights the importance of nonwoven nanomembranes obtained by electrospinning from degradable low-crystalline copolymers P(3HB-co-4HB) in the effectiveness of the skin wound healing process.

Abstract 1207: Bento: A toolkit for subcellular spatial analysis of RNA organization

Abstract We present Bento, a Python toolkit for subcellular spatial analysis of RNA, implementing tools for ingesting highly-multiplexed spatial transcriptomics data, visualization, detection of RNA localization patterns, identification of cell states, and subcellular spatial statistics. We applied our methods to analyze multiple spatial transcriptomics datasets from a variety of platforms, including seqFISH+ (10k RNA in cultured mouse fibroblast cells) MERFISH (130 RNA in cultured U2-OS cells), and the Spatial Molecular Imager (980 RNA in FFPE of NSCLC and breast cancer tumors) to show how subcellular spatial analysis can be leveraged to understand RNA localization and behavior. We use tensor factorization to perform unsupervised clustering analysis of subcellular patterns in each dataset, demonstrating how cell type and morphology are consistently linked to spatial RNA organization. Citation Format: Clarence Mah, Noorsher Ahmed, Dylan Lam, Hannah Carter, Gene Yeo. Bento: A toolkit for subcellular spatial analysis of RNA organization [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2022; 2022 Apr 8-13. Philadelphia (PA): AACR; Cancer Res 2022;82(12_Suppl):Abstract nr 1207.

Polyethylene Oxide Assisted Fish Collagen-Poly-ε-Caprolactone Nanofiber Membranes by Electrospinning.

Fish collagen has higher biocompatibility and lower immunogenicity than terrestrial collagen, and is currently one of the important raw materials for preparing biological materials. In this study, PEO was used as a spinning aid to prepare fish skin collagen-PCL nanofiber membranes by electrospinning, and the process was optimized to get smooth nanofibers. The morphological and mechanical properties of collagen-PCL nanofiber membranes were assessed by scanning electron microscopy (SEM). The changes in chemical composition due to the incorporation of collagen into PCL and PEO were determined by Fourier Transform infrared spectroscopy (FTIR). The biocompatibility of the collagen-PCL nanofiber membranes was evaluated in vitro in cultures of mouse fibroblasts and in vivo by subcutaneous implantation studies in rats. It was found that the diameter of the spun fibers became fine and smooth when the ratio of the collagen/PCL increased. The finally obtained nanofiber had good mechanical strength, porosity, and hydrophilicity, and could promote cell adhesion and proliferation. The FC-PCL nanofiber membrane prepared by this route opens a new way to prepare fish collagen biomaterials with electrospinning.

Understanding the Role of Surface Modification of Randomized Trabecular Titanium Structures in Bone Tissue Regeneration: An Experimental Study.

Background and Objectives: Three-dimensional (3D) metallic trabecular structures made by additive manufacturing (AM) technologies promote new bone formation and osteointegration. Surface modifications by chemical treatments can improve the osteoconductive properties of metallic structures. An in vivo study in sheep was conducted to assess the bone response to randomized trabecular titanium structures that underwent a surface modification by chemical treatment compared to the bone response to the untreated specimens. Material and Methods: Sixteen specimens with a randomized trabecular titanium structure were implanted in the spongious bone of the distal femur and proximal tibia and the cortical bone of the tibial diaphysis of two sheep. Of them, eight implants had undergone a chemical treatment (treated) and were compared to eight implants with the same structure but native surfaces (native). The sheep were sacrificed at 6 weeks. Surface features of the lattice structures (native and treated) were analyzed using a 3D non-contact profilometer. Compression tests of 18 lattice cubes were performed to investigate the mechanical properties of the two structures. Excellent biocompatibility for the trabecular structures was demonstrated in vitro using a cell mouse fibroblast culture. Histomorphometric analysis was performed to evaluate bone implant contact and bone ingrowth. Results: A compression test of lattice cubic specimens revealed a comparable maximum compressive strength value between the two tested groups (5099 N for native surfaces; 5558 N for treated surfaces; p > 0.05). Compared to native surfaces, a homogenous formation of micropores was observed on the surface of most trabeculae that increased the surface roughness of the treated specimens (4.3 versus 3.2 µm). The cellular viability of cells seeded on three-dimensional structure surfaces increased over time compared to that on plastic surfaces. The histomorphometric data revealed a similar behavior and response in spongious and cortical bone formation. The percentage of the implant surface in direct contact with the regenerated bone matrix (BIC) was not significantly different between the two groups either in the spongious bone (BIC: 27% for treated specimens versus 30% for native samples) or in the cortical bone (BIC: 75% for treated specimens versus 77% for native samples). Conclusions: The results of this study reveal rapid osseointegration and excellent biocompatibility for the trabecular structure regardless of surface treatment using AM technologies. The application of implant surfaces can be optimized to achieve a strong press-fit and stability, overcoming the demand for additional chemical surface treatments.

Blue Laser Irradiation Decreases the ATP Level in Mouse Skin and Increases the Production of Superoxide Anion and Hypochlorous Acid in Mouse Fibroblasts.

Simple SummaryPhotobiomodulation studies have reported that blue light irradiation induces the production of reactive oxygen species. We examined the effect of blue laser (405 nm) irradiation on ATP level in the skin and measured the types of reactive oxygen species and reactive nitrogen species. The decrease in the skin ATP level due to blue light irradiation may be caused by oxidative stress due to the generation of reactive oxygen species. These findings highlight the need to consider the effects on the skin when performing photobiomodulation treatment using blue light.Photobiomodulation studies have reported that blue light irradiation induces the production of reactive oxygen species. We investigated the effect of blue laser (405 nm) irradiation on the ATP levels in mouse skin and determined the types of reactive oxygen species and reactive nitrogen species using cultured mouse fibroblasts. Blue laser irradiation caused a decrease in the ATP level in the mouse skin and triggered the generation of superoxide anion and hypochlorous acid, whereas nitric oxide and peroxynitrite were not detected. Moreover, blue laser irradiation resulted in reduced cell viability. It is believed that the decrease in the skin ATP level due to blue light irradiation results from the increased levels of oxidative stress due to the generation of reactive oxygen species. This method of systematically measuring the levels of reactive oxygen species and reactive nitrogen species may be useful for understanding the effects of irradiation conditions.

Electric Cell-substrate Impedance Sensing in Biocompatibility Research.

In this paper, the possibility of using cell culture impedance measurements to assess the biocompatibility of a material in contact with cells was analyzed. For this purpose, the Electric Cell-substrate Impedance Sensing (ECIS) method and a commercial measuring device were used. The test substrates with thin-film electrodes made of various metals were prepared using the magnetron sputtering method. The choice of metals was dictated by their varying degrees of biocompatibility. Cultures of mouse fibroblasts were cultured on the prepared substrates. The experiment showed that the complete cycle of culture from attachment and reproduction to apoptosis occurred. The results obtained indicate that it is possible to use the ECIS method to study the influence of metal on cell culture activity.

Infradian 4-Day Rhythm of Proliferative Activity of L-929 Mouse Fibroblast Culture in the Logarithmic Growth Phase Is Exogenous.

We studied the dynamic of proliferative activity of cultured mouse transformed fibroblast-like L-929 cells in the logarithmic growth phase. During a long period (December 5-23, 2020), we revealed a 4-day rhythm of daily increase in the number of L-929 cells with an amplitude not lower than in a culture of embryonic fibroblast-like cells. Hence, the formation of the 4-day rhythm is not associated with the molecular mechanisms of inhibition of proliferation, which are absent in transformed cells. Daily thawing of samples of one culture over 17 days showed the presence of a 4-day rhythm synchronous between all thawed samples and the control cell culture. As deep freezing leads to the cessation of all life processes in cells, the formation of a 4-day rhythm of proliferative activity of cell culture is determined by an exogenous mechanism.

Cationic topical formulations tested in high dilutions offers protective effects in fibroblast cells culture

Topical administration is a simple and comfortable form of cutaneous administration of drugs. However, in this route of administration the drug needs to overcome the barrier posed by the skin to reach an effective concentration. For this reason, many topical formulations are developed with a cationic component. The promotion of absorption occurs due to the disruption of the stratum corneum. But this cationic component has also high irritating potential to the skin. The biotherapics are medicines prepared from a toxic product or etiologic agent, following the homeopathic pharmacopoeia technique, and they are used mainly in cases of hipersensitization. In this experiment, high dilutions (HD) obtained from a cationic formulation were prepared and evaluated considering cell viability in “in vitro” mouse fibroblast (L929) culture cells model by a colorimetric MTT assay. No signs of toxicity were observed, which demonstrates the safety of these HD preparations to the healthy cells. The effectiveness of these HD was also investigated in cells damaged by cationic formulations. The results demonstrated that the HD 30c was the most effective preparation in preventing the cell damage caused by the tested irritating product, increasing cell viability from 56.6% (damaged cells) to 100% (similar to negative control group, p>0.05). These results provide evidence of the positive action of high dilutions against the exposure to a cytotoxic agent.

Chemical Constituents and Biological Activities of Croton heliotropiifolius Kunth.

Croton heliotropiifolius Kunth (Euphorbiaceae), whose occurrence has already been registered in the most varied Brazilian biomes, is commonly found in the Chapada do Araripe, Ceará. The species is traditionally used to treat fungal, parasitic, and degenerative diseases. This study investigated the chemical composition and pharmacological potential (antioxidant, antifungal, antiparasitic, and cytotoxic) of an aqueous extract obtained from the roots of C. heliotropiifolius. Following a qualitative phytochemical screening, the chemical constituents were identified by ultra-efficiency liquid chromatography coupled witha quadrupole/time-of-flight system (UPLC-QTOF). The antioxidant potential was verified by thin-layer chromatography (TLC). The direct and combined antifungal activity of the extract against opportunistic Candida strains was investigated using the microdilution method. The minimal fungicidal concentration (MFC) was determined by subculture, while the modulation of the morphological transition (fungal virulence) was evaluated by light microscopy. The in vitro antiparasitic activity was analyzed using epimastigotes of Trypanosoma cruzi and promastigotes of Leishmania braziliensis and Leishmania infantum, while cytotoxicity was determined in cultures of mouse fibroblasts. The phytochemical analysis identified the presence of acids, terpenes, flavonoids, lignans, and alkaloids. Among these constituents, the presence of polar and non-polar phenolic compounds with known antioxidant action was highlighted. While the extract showed clinically ineffective antifungal effects, it could enhance the effectiveness of fluconazole, in addition to inhibiting the morphological transition associated with increased virulence in Candida strains. Although the extract showed low cytotoxicity against fibroblasts, it also had weak antiparasitic effects. In conclusion, Croton heliotropiifolius is a source of natural products with antifungal and antioxidant potential.

Hierarchically Assembled Type I Collagen Fibres as Biomimetic Building Blocks of Biomedical Membranes.

Wet spinning is an established fibre manufacturing route to realise collagen fibres with preserved triple helix architecture and cell acceptability for applications in biomedical membranes. However, resulting fibres still need to be chemically modified post-spinning to ensure material integrity in physiological media, with inherent risks of alteration of fibre morphology and with limited opportunities to induce fibrillogenesis following collagen fixation in the crosslinked state. To overcome this challenge, we hypothesised that a photoactive type I collagen precursor bearing either single or multiple monomers could be employed to accomplish hierarchically assembled fibres with improved processability, macroscopic properties and nanoscale organisation via sequential wet spinning and UV-curing. In-house-extracted type I rat tail collagen functionalised with both 4-vinylbenzyl chloride (4VBC) and methacrylate residues generated a full hydrogel network following solubilisation in a photoactive aqueous solution and UV exposure, whereby ~85 wt.% of material was retained following 75-day hydrolytic incubation. Wide-angle X-ray diffraction confirmed the presence of typical collagen patterns, whilst an averaged compression modulus and swelling ratio of more than 290 kPa and 1500 wt.% was recorded in the UV-cured hydrogel networks. Photoactive type I collagen precursors were subsequently wet spun into fibres, displaying the typical dichroic features of collagen and regular fibre morphology. Varying tensile modulus (E = 5 ± 1 − 11 ± 4 MPa) and swelling ratio (SR = 1880 ± 200 − 3350 ± 500 wt.%) were measured following post-spinning UV curing and equilibration with phosphate-buffered saline (PBS). Most importantly, 72-h incubation of the wet spun fibres in PBS successfully induced renaturation of collagen-like fibrils, which were fixed following UV-induced network formation. The whole process proved to be well tolerated by cells, as indicated by a spread-like cell morphology following a 48-h culture of L929 mouse fibroblasts on the extracts of UV-cured fibres.

Laser Processing of Polymer Films Fabricated from PHAs Differing in Their Monomer Composition.

The study reports results of using a CO2-laser in continuous wave (3 W; 2 m/s) and quasi-pulsed (13.5 W; 1 m/s) modes to treat films prepared by solvent casting technique from four types of polyhydroxyalkanoates (PHAs), namely poly-3-hydroxybutyrate and three copolymers of 3-hydroxybutyrate: with 4-hydroxybutyrate, 3-hydroxyvalerate, and 3-hydroxyhexanoate (each second monomer constituting about 30 mol.%). The PHAs differed in their thermal and molecular weight properties and degree of crystallinity. Pristine films differed in porosity, hydrophilicity, and roughness parameters. The two modes of laser treatment altered these parameters and biocompatibility in diverse ways. Films of P(3HB) had water contact angle and surface energy of 92° and 30.8 mN/m, respectively, and average roughness of 144 nm. The water contact angle of copolymer films decreased to 80–56° and surface energy and roughness increased to 41–57 mN/m and 172–290 nm, respectively. Treatment in either mode resulted in different modifications of the films, depending on their composition and irradiation mode. Laser-treated P(3HB) films exhibited a decrease in water contact angle, which was more considerable after the treatment in the quasi-pulsed mode. Roughness parameters were changed by the treatment in both modes. Continuous wave line-by-line irradiation caused formation of sintered grooves on the film surface, which exhibited some change in water contact angle (76–80°) and reduced roughness parameters (to 40–45 mN/m) for most films. Treatment in the quasi-pulsed raster mode resulted in the formation of pits with no pronounced sintered regions on the film surface, a more considerably decreased water contact angle (to 67–76°), and increased roughness of most specimens. Colorimetric assay for assessing cell metabolic activity (MTT) in NIH 3T3 mouse fibroblast culture showed that the number of fibroblasts on the films treated in the continuous wave mode was somewhat lower; treatment in quasi-pulsed radiation mode caused an increase in the number of viable cells by a factor of 1.26 to 1.76, depending on PHA composition. This is an important result, offering an opportunity of targeted surface modification of PHA products aimed at preventing or facilitating cell attachment.

Anti-Adhesion Effect of Composite Film Materials Based on Glycoluril-Modified Sodium Carboxymethyl Cellulose.

The aim of the study was to develop composite film materials derived from modified sodium carboxymethyl cellulose and to evaluate their anti-adhesive effects.Materials and Methods.The modified film materials were obtained by dissolving sodium carboxymethyl cellulose (Na-CMC) in an aqueous solution of a modifier (glycoluril) with subsequent homogenization and drying in a vacuum drying oven at room temperature. Physicomechanical parameters of the obtained films were determined using the Instron 3369 universal electromechanical testing machine (Great Britain) equipped with a climatic chamber (300–523 K), improved video extensometer, and the MKC-25 micrometer (Russia). Cytotoxicity of glycoluril-modified film materials derived from Na-CMC was studied by incubating cell cultures of 3T3-L1 mouse fibroblasts directly with extracts from films under study using a colorimetric test. Their anti-adhesion effect was investigated on 40 female Wistar rats by modeling a flat adhesion by inducing abrasion of the cecum and suturing the deserosed surface of the abdominal wall anatomically opposite the abrasion area. The presence of adhesions was assessed on day 8 after the operation. Commercial membrane Seprafilm (USA) was used as a reference sample.Results.It was found that extracts obtained from film materials derived from Na-CMC modified with glycoluril at a concentration of 0.01 and 0.05 wt. % had no cytotoxic effect on the cell culture of mouse fibroblasts 3T3-L1. Flat adhesions were not detected when using Seprafilm. When film materials under study were placed in the abdominal cavity between the injured areas, formation of flat adhesions was not observed or observed in one case out of ten.Conclusion.The obtained films are promising for preventing adhesions as a barrier-type agent. Modifying Na-CMC with glycoluril made it possible to create films that prevent formation of flat adhesions, have improved physical and mechanical properties and no cytotoxic effect.