Cryo-field Emission Scanning Electron Microscopy Research Articles

Structural investigations on nanoemulsions, solid lipid nanoparticles and nanostructured lipid carriers by cryo-field emission scanning electron microscopy and Raman spectroscopy

Recently, colloidal dispersions based on solid lipids (solid lipid nanoparticles, SLN) and mixtures of solid and liquid lipids (nanostructured lipid carriers, NLC) were described as innovative carrier systems. A spherical particle shape is the basis of features such as a high loading capacity and controlled drug release characteristics due to smaller lipid–water interfaces and longer diffusion pathways when compared to thin platelets. The structures of SLN and the influence of oil load (NLC) on particle properties were investigated by photon correlation spectroscopy (PCS), laser diffractometry (LD), cryo-field emission scanning electron microscopy (cryo-FESEM), Raman spectroscopy and infrared spectroscopy (IR), and compared to a conventional nanoemulsion. PCS and LD data show similar size and size distribution for SLN and NLC (approximately 210 nm, polydispersity index approximately 0.15) and suggested a long term physical stability for the dispersions which had been stored for up to 12 months at different temperatures. Using cryo-FESEM droplets (for the nanoemulsion) and almost spherical particles for SLN and NLC were observed. Raman spectroscopy resulted in spectra for NLC that are weighted to the SLN spectra, suggesting an undisturbed crystal structure. Infrared spectra of the NLC are predominantly SLN in nature. Importantly the SLN bands are unshifted in the NLC spectrum indicating that the crystalline structure is unaffected by the presence of the oil.

Introduction of silica into thermo-responsive poly( N-isopropyl acrylamide) hydrogels: A novel approach to improve response rates

The response rates of novel thermo-responsive poly( N-isopropyl acrylamide) (PNIPAM) hybrid hydrogels are compared to those of conventional chemically crosslinked PNIPAM hydrogels. The former materials were obtained by applying the sol–gel technology, in which the inorganic silica particles act as physical crosslinks for the organic polymer chains, leading to a semi-interpenetrating polymer network structure. In situ modulated temperature DSC shows that the introduction of hydrophilic silica improves the thermal response rate of the hybrid hydrogels to a great extent as compared to aqueous PNIPAM solutions and conventional PNIPAM hydrogels. Ex situ gravimetrical measurements also illustrate that the shrinking/swelling rate of the hybrid hydrogels is largely improved. It is assumed that the uniform distribution of the SiO 2 units, as demonstrated by cryo-field emission scanning electron microscopy, causes the silica to act as nano-sized water reservoirs, which reduce the characteristic diffusion length of water in the PNIPAM matrix so that it can be transported faster within the hybrid PNIPAM nano-composite.

Illustration of Pneumococcal Polysaccharide Capsule during Adherence and Invasion of Epithelial Cells

The capsular polysaccharide of Streptococcus pneumoniae represents an important virulence factor and protects against phagocytosis. In this study the amount of capsular polysaccharide present on the bacterial surface during the infection process was illustrated by electron microscopic studies. After infection of A549 cells (type II pneumocytes) and HEp-2 epithelial cells a modified fixation method was used that allowed visualization of the state of capsule expression. This modified fixation procedure did not require the use of capsule-specific antibodies. Visualization of pneumococci in intimate contact and invading cells demonstrated that pneumococci were devoid of capsular polysaccharide. Pneumococci not in contact with the cells did not show alterations in capsular polysaccharide. After infection of the cells, invasive pneumococci of different strains and serotypes were recovered. Single colonies of these recovered pneumococci exhibited an up-to-10(5)-fold-enhanced capacity to adhere and an up-to-10(4)-fold-enhanced capacity to invade epithelial cells. Electron microscopic studies using a lysine-ruthenium red (LRR) fixation procedure or cryo-field emission scanning electron microscopy revealed a reduction in capsular material, as determined in detail for a serotype 3 pneumococcal strain. The amount of polysaccharide in the serotype 3 capsule was also determined after intranasal infection of mice. This study illustrates for the first time the phenotypic variation of the polysaccharide capsule in the initial phase of pneumococcal infections. The modified LRR fixation allowed monitoring of the state of capsule expression of pathogens during the infectious process.

Using different structure types of microemulsions for the preparation of poly(alkylcyanoacrylate) nanoparticles by interfacial polymerization

A phase diagram of the pseudoternary system ethyloleate, polyoxyethylene 20 sorbitan mono-oleate/sorbitan monolaurate and water with butanol as a cosurfactant was prepared. Areas containing optically isotropic, low viscosity one-phase systems were identified and systems therein designated as w/o droplet-, bicontinuous- or solution-type microemulsions using conductivity, viscosity, cryo-field emission scanning electron microscopy and self-diffusion NMR. Nanoparticles were prepared by interfacial polymerization of selected w/o droplet, bicontinuous- or solution-type microemulsions with ethyl-2-cyanoacrylate. Morphology of the particles and entrapment of the water-soluble model protein ovalbumin were investigated. Addition of monomer to the different types of microemulsions (w/o droplet, bicontinuous, solution) led to the formation of nanoparticles, which were similar in size (∼ 250 nm), polydispersity index (∼ 0.13), zeta-potential (∼− 17 mV) and morphology. The entrapment of the protein within these particles was up to 95%, depending on the amount of monomer used for polymerization and the type of microemulsion used as a polymerization template. The formation of particles with similar characteristics from templates having different microstructure is surprising, particularly considering that polymerization is expected to occur at the water–oil interface by base-catalysed polymerization. Dynamics within the template (stirring, viscosity) or indeed interfacial phenomena relating to the solid–liquid interface appear to be more important for the determination of nanoparticle morphology and characteristics than the microstructure of the template system.

Biofilm Formation by Neisseria gonorrhoeae

Studies were performed in continuous-flow chambers to determine whether Neisseria gonorrhoeae could form a biofilm. Under these growth conditions, N. gonorrhoeae formed a biofilm with or without the addition of 10 microM sodium nitrite to the perfusion medium. Microscopic analysis of a 4-day growth of N. gonorrhoeae strain 1291 revealed evidence of a biofilm with organisms embedded in matrix, which was interlaced with water channels. N. gonorrhoeae strains MS11 and FA1090 were found to also form biofilms under the same growth conditions. Cryofield emission scanning electron microscopy and transmission electron microscopy confirmed that organisms were embedded in a continuous matrix with membranous structures spanning the biofilm. These studies also demonstrated that N. gonorrhoeae has the capability to form a matrix in the presence and absence of CMP-N-acetylneuraminic acid (CMP-Neu5Ac). Studies with monoclonal antibody 6B4 and the lectins soy bean agglutinin and Maackia amurensis indicated that the predominate terminal sugars in the biofilm matrix formed a lactosamine when the biofilm was grown in the absence of CMP-Neu5Ac and sialyllactosamine in the presence of CMP-Neu5Ac. N. gonorrhoeae strain 1291 formed a biofilm on primary urethral epithelial cells and cervical cells in culture without loss of viability of the epithelial cell layer. Our studies demonstrated that N. gonorrhoeae can form biofilms in continuous-flow chambers and on living cells. Studies of these biofilms may have implications for understanding asymptomatic gonococcal infection.

Cryo-FE-SEM & TEM immuno-techniques reveal new details for understanding white-rot decay of lignocellulose

High-resolution Cryo-Field Emission Scanning Electron Microscopy (HR-Cryo-FE-SEM) and immuno-cytochemistry were used to reveal novel details on the morphological events and spatial distribution of oxidoreductive enzymes during the degradation of birch wood by the white-rot fungi Phlebia radiata and mutant strain P. radiata Cel 26. Cryo-observations of fractured fibres showed degradation across the cell wall by P. radiata (wild) to progress by delamination and removal of concentric orientated aggregates from the secondary S2 cell wall. Decay by P. radiata Cel 26 progressed by removal of materials (lignin and hemicelluloses) between the aggregates (primarily cellulose) that remained even after advanced decay. With both decay patterns, extracellular slime materials were present uniting lumina hyphae with the attacked fibre wall. The extracellular slime material had two morphological forms: viz a fibrillar (often tripartite) and a ‘gel-form’, the former found in discrete bands progressing across the lumen onto the fibre wall. Using TEM immunocytochemistry, laccase, manganese peroxidase (MnP) and diarylpropane enzymes were localized in the periplasmic space of luminal hyphae, in association with the cell membrane, periplasmic vesicles and fungal cell wall. Extracellularly, the three enzymes were found associated with the slime and tripartite membranes and with the birch cell walls at all stages of attack through to middle lamella corner decay. Enzyme distribution was correlated with morphological changes in cell wall structure. The association of extracellular slime with these enzymes and sites of decay strongly suggests a major role for this matrix in fibre cell wall decomposition. To cite this article: G. Daniel et al., C. R. Biologies 327 (2004).

Structure and carbohydrate analysis of the exopolysaccharide capsule of Pseudomonas putida G7.

The aromatic hydrocarbon-degrading bacterium, Pseudomonas putida G7, produces exopolymers of potential interest in biotechnological applications. These exopolymers have been shown to have significant metal-binding ability. To initiate the study of the metal-polymer interactions, we explored the physical and chemical nature of the P. putida G7 exopolysaccharide, a major component of the exopolymer. A capsular structure was observed by light microscopy surrounding both planktonic and attached cells in biofilms after immunofluorescence staining with polyclonal antiserum raised against planktonic cells. Further work with planktonic cells showed that the immunostained capsule remained associated with young (log phase) cells, whereas older (stationary phase) cells lost their capsular material to the external milieu. Visualization of frozen, hydrated stationary phase cells by cryo-field emission scanning electron microscopy (cryoFESEM) revealed highly preserved extracellular material. In contrast, conventional scanning electron microscopy (SEM) of stationary phase cells showed rope-like material that most probably results from dehydrated and collapsed exopolymer. Both capsular and released exopolymers were separated from cells, and the released extracellular polysaccharide (EPS) was purified. Deoxycholate-polyacrylamide gel electrophoresis (PAGE) and silver/alcian blue staining of the partially purified material showed that it contained both EPS and lipopolysaccharide (LPS). Further purification of the EPS using a differential solubilization technique to remove LPS yielded highly purified EPS. Gas chromatography-mass spectrometry revealed that the purified EPS contained the monosaccharides, glucose, rhamnose, ribose, N-acetylgalactosamine and glucuronic acid. The structural and chemical properties of the P. putida EPS described here increase our understanding of the mechanisms of toxic metal binding by this well-known Proteobacterium.

High-resolution CryoFESEM of individual cell adhesion molecules (CAMs) in the glycocalyx of human platelets: detection of P-selectin (CD62P), GPI-IX complex (CD42A/CD42B alpha,B beta), and integrin GPIIbIIIa (CD41/CD61) by immunogold labeling and stereo imaging.

The aim of this study was to develop a model for the detection of individual cell adhesion molecules (CAMs) in the glycocalyx of spread human platelets using high-resolution cryo-field emission scanning electron microscopy (cryoFESEM). Three surface glycoprotein CAMs, P-selectin (CD62P), GPIba in the GPI-IX complex (CD42a/CD42b alpha,b beta), and the integrin GPIIbIIIa (CD41/CD61) in the human platelet were selected on the basis of their unique topographic shape. Spread human platelets were indirectly immunolabeled with 10-nm colloidal gold and then cryoimmobilized. After sublimation of water from the cryoimmobilized sample, partially freeze-dried platelets were coated unidirectionally with Pt, stabilized with carbon, and examined in an in-lens cryoFESEM using high-resolution backscattered electron imaging. CAMs were detected by indirect immunogold labeling and the length of each type of CAM was determined using analysis of differences in parallax as measured in the software program Sterecon. Our results demonstrate the efficacy of using high-resolution cryoFESEM to recognize and detect individual CAMs in the glycocalyx. Further advances in production of metal coatings with finer granularity, together with improvements in imaging (tilting and angle of stereo images), may provide better definition of the topography associated with glycosylation and formation of multimeric CAM complexes. (J Histochem Cytochem 49:809-819, 2001)

High-resolution backscatter electron detection of cell surface molecules on human platelets using the double-layer coating method and cryo field emission scanning electron microscopy.

A model system utilizing cryo scanning electron microscopy (SEM) for the detection of putative cell adhesion molecule(s) on the surface of human platelets is described. Plunge freezing was used for cryoimmobilization of unactivated and activated platelets after prefixation. Extracellular ice was removed by sublimation to expose the surface of the platelet membrane. Cryosamples were coated by the double-layer method, in which undirectional shadowing is performed at an angle of 45 degrees with 2 nm of platinum by thermal evaporation, followed by evaporation of 5 nm of carbon at an angle of 90 degrees for stabilization of the platinum film. The topography of the extracellular surface of the unstimulated platelet membrane was dominated by small spherical protrusions, while that of the activated platelet had not only similar spherical projections, but also possessed numerous rod-like protrusions, presumably representing the upregulation of the cell adhesion molecule, P-selectin, from intracellular a granules. These results clearly demonstrate that cryo field-emission SEM can detect molecular topography on the extracellular surface of cells consistent with the dimensions and shape of membrane cell adhesion molecules.