Craniomaxillofacial Bone Defects Research Articles

Analysis of the Dynamic Expression of the SMAD Family in the Periosteum During Guided Bone Regeneration.

The aim of this study was to investigate the dynamic expression of the SMAD family during guided bone regeneration for the reconstruction of cranio-maxillofacial bone defects. A swine model of guided bone regeneration was established with one side of the rib as the trauma group and the contralateral as control group. Periosteal and regenerative tissue specimens were harvested at 9 time points in the early, middle, and late phases, and were subjected to gene sequencing and tissue staining. Expression data of each SMAD family were extracted for further analysis, in which the correlation of the expression of the respective members within and between groups and at different time points was analyzed. The expression of individual members of the SMAD family fluctuates greatly, especially during the first month. The SMAD3 and SMAD4 genes were the most highly expressed. The foldchange value of SMAD6 was the largest and remained above 1.5 throughout the process. The dynamic expression levels of SMAD2, SMAD4, SMAD5, SMAD6, and SMAD9 showed a significant positive correlation in both groups. The expression levels of each gene showed a positive correlation with other SMAD genes. Tissue staining showed that the overall contour of the regenerated bone tissue was basically formed within the first 1 month. The first month of guided bone regeneration is a critical period for bone regeneration and is an important period for the SMAD family to play a role. The SMAD6 may play an important role in the whole process of guided bone regeneration.

Personalized PLGA/BCL Scaffold with Hierarchical Porous Structure Resembling Periosteum-Bone Complex Enables Efficient Repair of Bone Defect.

Using bone regeneration scaffolds to repair craniomaxillofacial bone defects is a promising strategy. However, most bone regeneration scaffolds still exist some issues such as a lack of barrier structure, inability to precisely match bone defects, and necessity to incorporate biological components to enhance efficacy. Herein, inspired by a periosteum-bone complex, a class of multifunctional hierarchical porous poly(lactic-co-glycolic acid)/baicalein scaffolds is facilely prepared by the union of personalized negative mold technique and phase separation strategy and demonstrated to precisely fit intricate bone defect cavity. The dense up-surface of the scaffold can prevent soft tissue cell penetration, while the loose bottom-surface can promote protein adsorption, cell adhesion, and cell infiltration. The interior macropores of the scaffold and the loaded baicalein can synergistically promote cell differentiation, angiogenesis, and osteogenesis. These findings can open an appealing avenue for the development of personalized multifunctional hierarchical materials for bone repair.

Advances in Three-Dimensional Printing for Craniomaxillofacial Trauma Reconstruction: A Systematic Review.

Craniomaxillofacial (CMF) fractures present significant challenges for plastic surgeons due to their intricate nature. Conventional methods such as autologous bone grafts have limitations, necessitating advancements in reconstructive surgery techniques. This study reviewed the use of three-dimensional printing for CMF trauma reconstruction using human studies. A systematic search of PubMed, EMBASE, and Google Scholar was conducted in February 2024 for case reports, case series, and clinical trials related to CMF trauma reconstruction using three-dimensional printing technology. The authors' systematic review included 20 studies and a total of 170 participants with CMF bone defects. In general, the authors observed low bias risk in analyzed case reports and series, serious bias risk in nonrandomized controlled trials, and moderate bias risk in randomized controlled trials. The printed objects included CMF structure model prototypes, patient-specific implants, and other custom surgical devices. Studies reveal successful outcomes, including restored facial symmetry and function, restored orbital occlusion, resolved enophthalmos and diplopia, achieved cosmetically symmetrical lower face reconstruction, and precise fitting of surgical devices, enhancing patient and surgeon comfort. However, complications such as local infection, implant exposure, and persistent diplopia were reported. Three-dimensional printed devices reduced surgery time but increased preparation time and production costs. In-house production options could mitigate these time and cost expenditures. Three-dimensional printing holds potential in CMF trauma reconstruction, addressing both functional and esthetic restoration. Nevertheless, challenges persist in implementing this advanced technology in resource-limited environments.

Dynamic Transcriptome Analysis of SFRP Family in Guided Bone Regeneration With Occlusive Periosteum in Swine Model.

A variety of congenital or acquired conditions can cause craniomaxillofacial bone defects, resulting in a heavy financial burden and psychological stress. Guided bone self-generation with periosteum-preserved has great potential for reconstructing large bone defects. A swine model of guided bone regeneration with occlusive periosteum was established, the rib segment was removed, and the periosteum was sutured to form a closed regeneration chamber. Hematoxylin and eosin staining, Masson's staining, and Safranine O-Fast Green staining were done. Nine-time points were chosen for collecting the periosteum and regenerated bone tissue for gene sequencing. The expression level of each secreted frizzled-related protein (SFRP) member and the correlations among them were analyzed. The process of bone regeneration is almost complete 1 month after surgery, and up to 1 week after surgery is an important interval for initiating the process. The expression of each SFRP family member fluctuated greatly. The highest expression level of all members ranged from 3 days to 3 months after surgery. The expression level of SFRP2 was the highest, and the difference between 2 groups was the largest. Secreted frizzled-related protein 2 and SFRP4 showed a notable positive correlation between the control and model groups. Secreted frizzled-related protein 1, SFRP2, and SFRP4 had a significant spike in fold change at 1 month postoperatively. Secreted frizzled-related protein 1 and SFRP2 had the strongest correlation. This study revealed the dynamic expression of the SFRP family in guided bone regeneration with occlusive periosteum in a swine model, providing a possibility to advance the clinical application of bone defect repair.

Reconstruction of Craniomaxillofacial Bone Defects with 3D-Printed Bioceramic Implants: Scoping Review and Clinical Case Series.

Reconstruction of craniomaxillofacial bone defects using 3D-printed hydroxyapatite (HA) bioceramic patient-specific implants (PSIs) is a new technique with great potential. This study aimed to investigate the advantages, disadvantages, and clinical outcomes of these implants in craniomaxillofacial surgeries. The PubMed and Embase databases were searched for patients with craniomaxillofacial bone defects treated with bioceramic PSIs. Clinical outcomes such as biocompatibility, biomechanical properties, and aesthetics were evaluated and compared to those of commonly used titanium or poly-ether-ether-ketone (PEEK) implants and autologous bone grafts. Two clinical cases are presented to illustrate the surgical procedure and clinical outcomes of HA bioceramic PSIs. Literature review showed better a biocompatibility of HA PSIs than titanium and PEEK. The initial biomechanical properties were inferior to those of autologous bone grafts, PEEK, and titanium but improved when integrated. Satisfactory aesthetic results were found in our two clinical cases with good stability and absence of bone resorption or infection. Radiological signs of osteogenesis were observed in the two clinical cases six months postoperatively. HA bioceramic PSIs have excellent biocompatible properties and imitate natural bone biomechanically and radiologically. They are a well-suited alternative for conventional biomaterials in the reconstruction of load-sharing bone defects in the craniomaxillofacial region.

Magnetic Graphene Oxide Nanocomposites Boosts Craniomaxillofacial Bone Regeneration by Modulating circAars/miR-128-3p/SMAD5 Signaling Axis.

The ability of nanomaterials to induce osteogenic differentiation is limited, which seriously imped the repair of craniomaxillofacial bone defect. Magnetic graphene oxide (MGO) nanocomposites with the excellent physicochemical properties have great potential in bone tissue engineering. In this study, we aim to explore the craniomaxillofacial bone defect repairment effect of MGO nanocomposites and its underlying mechanism. The biocompatibility of MGO nanocomposites was verified by CCK8, live/dead staining and cytoskeleton staining. The function of MGO nanocomposites induced osteogenic differentiation of BMSCs was investigated by ALP activity detection, mineralized nodules staining, detection of osteogenic genes and proteins, and immune-histochemical staining. BMSCs with or without MGO osteogenic differentiation induction were collected and subjected to high-throughput circular ribonucleic acids (circRNAs) sequencing, and then crucial circRNA circAars was screened and identified. Bioinformatics analysis, Dual-luciferase reporter assay, RNA binding protein immunoprecipitation (RIP), fluorescence in situ hybridization (FISH) and osteogenic-related examinations were used to further explore the ability of circAars to participate in MGO nanocomposites regulation of osteogenic differentiation of BMSCs and its potential mechanism. Furthermore, critical-sized calvarial defects were constructed and were performed to verify the osteogenic differentiation induction effects and its potential mechanism induced by MGO nanocomposites. We verify the good biocompatibility and osteogenic differentiation improvement effects of BMSCs mediated by MGO nanocomposites. Furthermore, a new circRNA-circAars, we find and identify, is obviously upregulated in BMSCs mediated by MGO nanocomposites. Silencing circAars could significantly decrease the osteogenic ability of MGO nanocomposites. The underlying mechanism involved circAars sponging miR-128-3p to regulate the expression of SMAD5, which played an important role in the repair craniomaxillofacial bone defects mediated by MGO nanocomposites. We found that MGO nanocomposites regulated osteogenic differentiation of BMSCs via the circAars/miR-128-3p/SMAD5 pathway, which provided a feasible and effective strategy for the treatment of craniomaxillofacial bone defects.

CMF defects database: A craniomaxillofacial defects dataset and a data-driven repair method

Due to the large number of medical images generated each year, data-driven machine learning methods hold great promise in the field of medical image diagnosis and analysis. In recent years, the application of deep neural networks in oral and cranio-maxillofacial surgery has gradually increased, helping surgeons to obtain more comprehensive information and develop more accurate treatment planning, including segmentation and recognition of anatomical structures, disease diagnosis, and automatic surgical planning. This paper presents a new dataset of maxillofacial defect images, containing computed tomography (CT) data of 125 normal human cranial skeletal 3D reconstructions and 2625 corresponding craniomaxillofacial bone defects. The data are classified according to seven different types of defects which are anterior skull and forehead, zygomatic arch, zygomatic bone, Naso-orbital-ethmoidal (NOE), wall of the maxillary sinus, mandibular body, mandibular ramus, and condylar respectively. Each kind of defect is further divided into three categories according to the different locations, including left side, right side, and bilateral sides (or defect passes through the midline of the face). There are three main contributions: first, a dataset is publicly available to assist researchers in the development of data-based methods for generating missing portions of the skull; second, a repair method is proposed to evaluate the dataset; third, a review of various related datasets. The release of this dataset aims to advance artificial intelligence methods in the field of oral and cranio-maxillofacial surgery and plastic surgery helping physicians to reduce the difficulty and time consumption while improving the efficiency and accuracy of prosthesis design.

Multi-site enhancement of osteogenesis: peptide-functionalized GelMA hydrogels with three-dimensional cultures of human dental pulp stem cells.

Human dental pulp stem cells (hDPSCs) have demonstrated greater proliferation and osteogenic differentiation potential in certain studies compared to other types of mesenchymal stem cells, making them a promising option for treating craniomaxillofacial bone defects. However, due to low extracting concentration and long amplifying cycles, their access is limited and utilization rates are low. To solve these issues, the principle of bone-forming peptide-1 (BFP1) in situ chemotaxis was utilized for the osteogenic differentiation of hDPSCs to achieve simultaneous and synergistic osteogenesis at multiple sites. BFP1-functionalized gelatin methacryloyl hydrogel provided a 3D culture microenvironment for stem cells. The experimental results showed that the 3D composite hydrogel scaffold constructed in this study increased the cell spread area by four times compared with the conventional GelMA scaffold. Furthermore, the problems of high stem cell dosage and low rate of utilization were alleviated by orchestrating the programmed proliferation and osteogenic differentiation of hDPSCs. In vivo, high-quality repair of critical bone defects was achieved using hDPSCs extracted from a single tooth, and multiple 'bone island'-like structures were successfully observed that rapidly induced robust bone regeneration. In conclusion, this study suggests that this kind of convenient, low-cost, island-like osteogenesis strategy involving a low dose of hDPSCs has great potential for repairing craniomaxillofacial critical-sized bone defects.

TyroFill-Titanium Implant Constructs for the Coordinated Repair of Rabbit Mandible and Tooth Defects.

Currently used methods to repair craniomaxillofacial (CMF) bone and tooth defects require a multi-staged surgical approach for bone repair followed by dental implant placement. Our previously published results demonstrated significant bioengineered bone formation using human dental pulp stem cell (hDPSC)-seeded tyrosine-derived polycarbonate scaffolds (E1001(1K)-bTCP). Here, we improved upon this approach using a modified TyroFill (E1001(1K)/dicalcium phosphate dihydrate (DCPD)) scaffold-supported titanium dental implant model for simultaneous bone-dental implant repair. TyroFill scaffolds containing an embedded titanium implant, with (n = 3 each time point) or without (n = 2 each time point) seeded hDPCs and Human Umbilical Vein Endothelial Cells (HUVECs), were cultured in vitro. Each implant was then implanted into a 10 mm full-thickness critical-sized defect prepared on a rabbit mandibulee. After 1 and 3 months, replicate constructs were harvested and analyzed using Micro-CT histological and IHC analyses. Our results showed significant new bone formation surrounding the titanium implants in cell-seeded TyroFill constructs. This study indicates the potential utility of hDPSC/HUVEC-seeded TyroFill scaffolds for coordinated CMF bone-dental implant repair.

Natural bone inspired core–shell triple-layered gel/PCL/gel 3D printed scaffolds for bone tissue engineering

Despite technological advancements in bone tissue engineering, it is still a challenge to fabricate a scaffold with high bioactivity as well as high mechanical strength that can promote osteogenesis as well as bear load. Here we developed a 3D printed gel-polymer multi-layered hybrid scaffold. The innermost layer is porous gel-based framework made of gelatin/carboxymethyl-chitin/nano-hydroxyapatite and is cryogenically 3D printed. Further, the second and middle layer of micro-engineered polycaprolactone (PCL) is infused in the gel with controlled penetration and tuneable coating thickness. The PCL surface is further coated with a third and final thin layer of gel matrix used for the first layer. This triple-layered structure demonstrates compression strength and modulus of 13.07 ± 1.15 MPa and 21.8 ± 0.82 MPa, respectively, post 8 weeks degradation which is >3000% and >700% than gel scaffold. It also shows degradation of 6.84 ± 0.70% (83% reduction than gel scaffold) after 12 weeks and swelling of 69.09 ± 6.83% (81% reduction) as compared to gel scaffolds. Further, nearly 300%, 250%, 50%, and 440% increase in cellular attachment, proliferation, protein generation, and mineralization, respectively are achieved as compared to only PCL scaffolds. Thus, these hybrid scaffolds offer high mechanical strength, slow degradation rate, high bioactivity, and high osteoconductivity. These multifunctional scaffolds have potential for reconstructing non-load-bearing bone defects like sinus lift, jaw cysts, and moderate load-bearing like reconstructing hard palate, orbital palate, and other craniomaxillofacial bone defects.

Generative design approach to combine architected Voronoi foams with porous collagen scaffolds to create a tunable composite biomaterial

Regenerative biomaterials for musculoskeletal defects must address multi-scale mechanical challenges. Repairing craniomaxillofacial bone defects, which are often large and irregularly shaped, requires close conformal contact between implant and defect margins to aid healing. While mineralized collagen scaffolds can promote mesenchymal stem cell osteogenic differentiation in vitro and bone formation in vivo, their mechanical performance is insufficient for surgical translation. We report a generative design approach to create scaffold-mesh composites by embedding a macro-scale polymeric Voronoi mesh into the mineralized collagen scaffold. The mechanics of architected foam reinforced composites are defined by a rigorous predictive moduli equation. We show biphasic composites localize strain during loading. Further, planar and 3D mesh-scaffold composites can be rapidly shaped to aid conformal fitting. Voronoi-based composites overcome traditional porosity-mechanics relationship limits while enabling rapid shaping of regenerative implants to conformally fit complex defects unique for individual patients. Statement of SignificanceBiomaterial strategies for (craniomaxillofacial) bone regeneration are often limited by the size and complex geometry of the defects. Voronoi structures are open-cell foams with tunable mechanical properties which have primarily been used computationally. We describe generative design strategies to create Voronoi foams via 3D-printing then embed them into an osteogenic mineralized collagen scaffold to form a multi-scale composite biomaterial. Voronoi structures have predictable and tailorable moduli, permit stain localization to defined regions of the composite, and permit conformal fitting to effect margins to aid surgical practicality and improve host-biomaterial interactions. Multi-scale composites based on Voronoi foams represent an adaptable design approach to address significant challenges to large-scale bone repair.

Research progress of 3D printed poly (ether ether ketone) in the reconstruction of craniomaxillofacial bone defects.

The clinical challenge of bone defects in the craniomaxillofacial region, which can lead to significant physiological dysfunction and psychological distress, persists due to the complex and unique anatomy of craniomaxillofacial bones. These critical-sized defects require the use of bone grafts or substitutes for effective reconstruction. However, current biomaterials and methods have specific limitations in meeting the clinical demands for structural reinforcement, mechanical support, exceptional biological performance, and aesthetically pleasing reconstruction of the facial structure. These drawbacks have led to a growing need for novel materials and technologies. The growing development of 3D printing can offer significant advantages to address these issues, as demonstrated by the fabrication of patient-specific bioactive constructs with controlled structural design for complex bone defects in medical applications using this technology. Poly (ether ether ketone) (PEEK), among a number of materials used, is gaining recognition as a feasible substitute for a customized structure that closely resembles natural bone. It has proven to be an excellent, conformable, and 3D-printable material with the potential to replace traditional autografts and titanium implants. However, its biological inertness poses certain limitations. Therefore, this review summarizes the distinctive features of craniomaxillofacial bones and current methods for bone reconstruction, and then focuses on the increasingly applied 3D printed PEEK constructs in this field and an update on the advanced modifications for improved mechanical properties, biological performance, and antibacterial capacity. Exploring the potential of 3D printed PEEK is expected to lead to more cost-effective, biocompatible, and personalized treatment of craniomaxillofacial bone defects in clinical applications.

Click-based injectable bioactive PEG-hydrogels guide rapid craniomaxillofacial bone regeneration by the spatiotemporal delivery of rhBMP-2.

Craniomaxillofacial bone defects result in physical and psychological dual injuries making the promotion or acceleration of bone regeneration imperative. In this work, a fully biodegradable hydrogel is facilely prepared via thiol-ene "click" reactions under human physiological conditions using multifunctional poly(ethylene glycol) (PEG) derivatives as precursors. This hydrogel shows excellent biological compatibility, enough mechanical strength, a low swelling rate and an appropriate degradation rate. Rat bone marrow mesenchymal stem cells (rBMSCs) can survive and proliferate on/in the PEG hydrogel and differentiate into osteogenic cells. The PEG hydrogel can also effectively load rhBMP-2 through the above "click" reaction. Under the physical barrier of the chemically crosslinked hydrogel network, the spatiotemporal release of rhBMP-2 effectively promotes the proliferation and osteogenic differentiation of rBMSCs at a loading concentration of 1 μg ml-1. Finally, based on a rat calvarial critical-size defect model, the rhBMP-2 immobilized hydrogel loaded with rBMSCs basically accomplishes the repair and regeneration within 4 weeks featured by remarkably enhanced osteogenesis and angiogenesis. The click-based injectable bioactive PEG hydrogel developed in the present study is a new type of bone substitute with great expectations in future clinical applications.

Functional Hydrogels and Their Applications in Craniomaxillofacial Bone Regeneration.

Craniomaxillofacial bone defects are characterized by an irregular shape, bacterial and inflammatory environment, aesthetic requirements, and the need for the functional recovery of oral-maxillofacial areas. Conventional clinical treatments are currently unable to achieve high-quality craniomaxillofacial bone regeneration. Hydrogels are a class of multifunctional platforms made of polymers cross-linked with high water content, good biocompatibility, and adjustable physicochemical properties for the intelligent delivery of goods. These characteristics make hydrogel systems a bright prospect for clinical applications in craniomaxillofacial bone. In this review, we briefly demonstrate the properties of hydrogel systems that can come into effect in the field of bone regeneration. In addition, we summarize the hydrogel systems that have been developed for craniomaxillofacial bone regeneration in recent years. Finally, we also discuss the prospects in the field of craniomaxillofacial bone tissue engineering; these discussions can serve as an inspiration for future hydrogel design.

Preliminary Application Research of 3D Bioprinting in Craniofacial Reconstruction.

In recent years, 3-dimensional (3D) printing has been widely used in regenerative medicine research and other fields because of its ability to customize macroscopic morphology and precisely control microstructure. Polymer scaffolds are 1 of the commonly used 3D bioprinting materials for defect repair and have recently been a research focus. Our article explored the bone-formation accelerating effect of 3D-printed porous scaffold Poly(glycerol sebacate) [PGS] in the critical bone defect of an enhancing rabbit mandibular model. Also, we overview and summarize the classification of 3D bioprinting materials and prospects for their various application scenarios in craniofacial reconstruction surgery. A PGS elastomer scaffold was prepared by polymerizing equimolar amounts of sebacic acid and glycerol using a biological 3D printer. Six male New Zealand white rabbits were prepared (3 for the control group and 3 for the PGS group), each weighing 3kg. Osteotomy was performed at the anterior edge of the ascending ramus of the mandible with a bone saw to open the 8mm defect. Defects of the control group were empty, and defects of the PGS group were put into 8mm-wide PGS elastomer scaffolds. The rabbits were euthanized 6 weeks after the operation, and the postoperative mandibles were collected. Information (presence or absence of pus from infection, nonunion, degree of macroscopic bone healing) was recorded, and the skeletal tissue was fixed in a paraformaldehyde solution. The mandible on the enhanced side was significantly longer than that on the opposite side, and the contralateral incisor was hyperplasia. The mandibles of rabbits in each group healed well, and there was no obvious local infection and purulence. The gross specimen appearance showed that both ends of the defect were connected. When comparing the reconstructed mandibles of the two groups, it is apparent that the width and thickness of the new bone in the PGS group were significantly better than that in the control group. This article verifies the effect of 3D polypore PGS scaffolds in animal craniomaxillofacial bone defects and introduces various application scenarios of 3D printing materials in craniomaxillofacial reconstruction surgery. There are quite good application prospects for 3D bioprinting in animal experiments and even clinical treatment of craniofacial defects.

ETV2 promotes osteogenic differentiation of human dental pulp stem cells through the ERK/MAPK and PI3K-Akt signaling pathways

BackgroundThe repair of cranio-maxillofacial bone defects remains a formidable clinical challenge. The Ets variant 2 (ETV2) transcription factor, which belongs to the E26 transformation-specific (ETS) family, has been reported to play a key role in neovascularization. However, the role of ETV2 in the osteogenesis of human dental pulp stem cells (hDPSCs) remains unexplored.MethodsTransgenic overexpression of ETV2 was achieved using a lentiviral vector, based on a Dox-inducible system. The effects of Dox-induced overexpression of ETV2 on the osteogenesis of hDPSCs were evaluated by quantitative real-time polymerase chain reaction (qRT-PCR), western blot, immunofluorescence staining, alkaline phosphatase (ALP) staining, and Alizarin Red S (ARS) staining. Additionally, RNA-sequencing (RNA-Seq) analysis was performed to analyze the underlying mechanisms of ETV2-induced osteogenesis. Additionally, the role of ETV2 overexpression in bone formation in vivo was validated by animal studies with a rat calvarial defect model and a nude mice model.ResultsOur results demonstrated that ETV2 overexpression significantly upregulated the mRNA and protein expression levels of osteogenic markers, markedly enhanced ALP activity, and promoted matrix mineralization of hDPSCs. Moreover, the results of RNA-Seq analysis and western blot showed that the ERK/MAPK and PI3K-Akt signaling pathways were activated upon transgenic overexpression of ETV2. The enhanced osteogenic differentiation of hDPSCs due to ETV2 overexpression was partially reversed by treatment with inhibitors of ERK/MAPK or PI3K-AKT signaling. Furthermore, the results of in vivo studies demonstrated that ETV2 overexpression improved bone healing in a rat calvarial defect model and increased ectopic bone formation in nude mice.ConclusionsCollectively, our results indicated that ETV2 overexpression exerted positive effects on the osteogenesis of hDPSCs, at least partially via the ERK/MAPK and PI3K/AKT signaling pathways.

A Bilayer Membrane Doped with Struvite Nanowires for Guided Bone Regeneration.

Guided bone regeneration (GBR) therapy demonstrates a prominent curative effect on the management of craniomaxillofacial (CMF) bone defects. In this study, a GBR membrane consisting of a microporous layer and a struvite-nanowire-doped fibrous layer is constructed via non-solvent induced phase separation, followed by an electrospinning procedure to treat critical-sized calvarial defects. The microporous layer shows selective permeability for excluding the rapid-growing non-osteogenic tissues and potential wound stabilization. The nanowire-like struvite is synthesized as the deliverable therapeutic agent within the fibrous layer to facilitate bone regeneration. Such a membrane displays a well-developed heterogeneous architecture, satisfactory mechanical performance, and long-lasting characteristics. The in vitro biological evaluation reveals that apart from being a strong barrier, the bilayer struvite-laden membrane can actively promote cellular adhesion, proliferation, and osteogenic differentiation. Consequently, the multifunctional struvite-doped membranes are applied to treat 5mm-sized bilateral calvarial defects in rats, resulting in overall improved healing outcomes compared with the untreated or the struvite-free membrane-treated group, which is characterized by enhanced osteogenesis and significantly increased new bone formation. The encouraging preclinical results reveal the great potential of the bilayer struvite-doped membrane as a clinical GBR device for augmenting large-area CMF bone reconstruction.

Craniomaxillofacial derived bone marrow mesenchymal stem/stromal cells (BMSCs) for craniomaxillofacial bone tissue engineering: A literature review

Craniomaxillofacial bone defects seriously affect the appearance, function, and psychological status of patients. Traditional autologous bone grafting is very challenging due to the limited sources of bone tissue, excessive surgical trauma, and high incidence of related complications. Craniomaxillofacial bone tissue engineering (BTE) strategies based on bone marrow mesenchymal stem cells (BMSCs) are emerging as an alternative. Craniomaxillofacial BMSCs (C-BMSCs) are homologous to craniomaxillofacial bones, which develop from the mesoderm and neural crest. This article aims to compare the differences in osteogenesis, angiogenesis, and immune regulation of C-BMSCs and other sources of BMSCs, and propose ideas and strategies such as 3D printing and mechanotherapy to completely harness the characteristics of C-BMSCs. In conclusion, C-BSMCs are a promising source of stem cells for the repair and reconstruction of craniomaxillofacial bone defects, and more attention should be paid to accelerating their basic research and clinical practices.

A Mini-Pig Mandibular Defect Model for Evaluation of Craniomaxillofacial Bone Regeneration.

Craniomaxillofacial bone defects represent a clinical challenge in the fields of maxillofacial surgery and (implant) dentistry. Regeneration of these bone defects requires the application of bone graft materials that facilitate new bone formation in a safe, reliable, and predictive manner. In addition to autologous bone graft, several types of (synthetic) bone substitute materials have become clinically available, and still major efforts are focused on improving such bone substitute materials by optimizing their properties. Given the regulatory necessity to evaluate the performance of new bone substitute materials for craniomaxillofacial bone regeneration in a large animal model with similarity to human bone before clinical application, we here describe a mini-pig mandibular bone defect model that allows for the creation of multiple (critical-size) bone defects within the mandibular body of a single animal. As examples of bone substitute materials, we utilize both the clinically used BioOss granules and an experimental calcium phosphate cement for filling the created defects. Regarding the latter, its advantages are the injectable application within the defect site, in which the material rapidly sets, and the tailorable degradation properties via the inclusion of hydrolytically degrading polymeric particles. For both bone substitute materials, we show the suitability of the bone defect model to assess bone regeneration via histology and micro-computed tomography. Impact statement Given the regulatory necessity to evaluate the performance of new bone substitute materials for craniomaxillofacial bone regeneration in a large animal model with similarity to the human bone before clinical application, we here describe a mini-pig mandibular bone defect model that allows for the creation of multiple (critical-size) bone defects within the mandibular body of a single animal that can be used for the evaluation of the bone regenerative capacity of new bone grafting materials as well as tissue-engineered products for alveolar bone regeneration.

Repair of critical-size porcine craniofacial bone defects using a collagen–polycaprolactone composite biomaterial

Regenerative medicine approaches for massive craniomaxillofacial (CMF) bone defects face challenges associated with the scale of missing bone, the need for rapid graft-defect integration, and challenges related to inflammation and infection. Mineralized collagen scaffolds have been shown to promote mesenchymal stem cell osteogenesis due to their porous nature and material properties, but are mechanically weak, limiting surgical practicality. Previously, these scaffolds were combined with 3D-printed polycaprolactone (PCL) mesh to form a scaffold-mesh composite to increase strength and promote bone formation in sub-critical sized porcine ramus defects. Here, we compare the performance of mineralized collagen–PCL composites to the PCL mesh in a critical-sized porcine ramus defect model. While there were no differences in overall healing response between groups, our data demonstrated broadly variable metrics of healing regarding new bone infiltration and fibrous tissue formation. Abscesses were present surrounding some implants and PCL polymer was still present after 9–10 months of implantation. Overall, while there was limited successful healing, with 2 of 22 implants showed substantial levels of bone regeneration, and others demonstrating some form of new bone formation, the results suggest targeted improvements to improve repair of large animal models to more accurately represent CMF bone healing. Notably, strategies to increase osteogenesis throughout the implant, modulate the immune system to support repair, and employ shape-fitting tactics to avoid implant micromotion and resultant fibrosis. Improvements to the mineralized collagen scaffolds involve changes in pore size and shape to increase cell migration and osteogenesis and inclusion or delivery of factors to aid vascular ingrowth and bone regeneration.