Cranial Defects Research Articles

Bone flap binding and transposition: a method for bone reconstruction in cranial burst fractures and early-stage growing skull fractures.

To introduce a method of cranial bone reconstruction for cranial burst fractures and early-stage growing skull fractures, named bone flap binding and transposition. Cranial burst fractures, severe head injuries predominantly observed in infants, are characterized by widely diastatic skull fractures coupled with acute extracranial cerebral herniation beneath an intact scalp through ruptured dura mater. These injuries can develop into growing skull fractures. This study included two cases to illustrate the procedure, with a particular focus on the bone steps in managing these conditions. The medical history, clinical presentation, surgical procedures, and postoperative follow-up were retrospectively studied. The details of the surgical procedure were described. The method of bone reconstruction, named bone flap binding and transposition, was applied after the lacerated dural repair. Two bone pieces were combined to eliminate the diastatic bone defect and then fixed by an absorbable cranial fixation clip and bound by sutures. The combined bone flap was repositioned into the bone window, completely covering the area of the original dural laceration. Subsequently, the bone defect was transferred to the area of normal dura. The postoperative courses for the two infants were uneventful. Follow-up CT scans revealed new bone formation at the previous bone defect and no progressive growing skull fracture. The major cranial defects had disappeared, leaving only small residual defects at the corners of the skull bone window, which required further recovery and did not affect the solidity of the skull. Bone flap binding and transposition provide a straightforward, cost-effective, and reliable method for cranial bone reconstruction of cranial burst fractures and early-stage growing skull fractures. This method has taken full advantage of the small infant's dura osteogenic potential without the need for artificial or metallic bone repair materials. The effectiveness of the method needs further validation with more cases in the future.

Apoptotic Vesicles Derived from Dental Pulp Stem Cells Promote Bone Formation through the ERK1/2 Signaling Pathway.

Osteoporosis is a common degenerative bone disease. The treatment of osteoporosis remains a clinical challenge in light of the increasing aging population. Human dental pulp stem cells (DPSCs), a type of mesenchymal stem cells (MSCs), are easy to obtain and have a high proliferation ability, playing an important role in the treatment of osteoporosis. However, MSCs undergo apoptosis within a short time when used in vivo; therefore, apoptotic vesicles (apoVs) have attracted increasing attention. Currently, the osteogenic effect of DPSC-derived apoVs is unknown; therefore, this study aimed to determine the role of DPSC-derived apoVs and their potential mechanisms in bone regeneration. We found that MSCs could take up DPSC-derived apoVs, which then promoted MSC osteogenesis in vitro. Moreover, apoVs could increase the trabecular bone count and bone mineral density in the mouse osteoporosis model and could promote bone formation in rat cranial defects in vivo. Mechanistically, apoVs promoted MSC osteogenesis by activating the extracellular regulated kinase (ERK)1/2 signaling pathway. Consequently, we propose a novel therapy comprising DPSC-derived apoVs, representing a promising approach to treat bone loss and bone defects.

Hierarchically Biomimetic Scaffolds with Anisotropic Micropores and Nanotopological Patterns to Promote Bone Regeneration via Geometric Modulation.

Structural engineering is an appealing means to modulate osteogenesis without the intervention of exogenous cells or therapeutic agents. In this work, a novel 3D scaffold with anisotropic micropores and nanotopographical patterns is developed. Scaffolds with oriented pores are fabricated via the selective extraction of water-soluble polyethylene oxide from its poly(ε-caprolactone) co-continuous mixture and uniaxial stretching. The plate apatite-like lamellae are subsequently hatched on the pore walls through surface-induced epitaxial crystallization. Such a unique geometric architecture yields a synergistic effect on the osteogenic capability. The prepared scaffold leads to a 19.2% and 128.0% increase in the alkaline phosphatase activity of rat bone mesenchymal stem cells compared to that of the scaffolds with only oriented pores and only nanotopographical patterns, respectively. It also induces the greatest upregulation of osteogenic-related gene expression in vitro. The cranial defect repair results demonstrate that the prepared scaffold effectively promotes new bone regeneration, as indicated by a 350% increase in collagen I expression in vivo compared to the isotropic porous scaffold without surface nanotopology after implantation for 14weeks. Overall, this work provides geometric motifs for the transduction of biophysical cues in 3D porous scaffolds, which is a promising option for tissue engineering applications.

Cranioplasty in Oman: Retrospective review of cases from the National Craniofacial Center 2012-2022.

Cranioplasty is a complex craniofacial and neurosurgical procedure that aims to reinstate the architecture of the cranial vault and elevate both its aesthetic and neurological function. Several reconstructive materials have been thoroughly explored in the search for the optimal solution for cranioplasty. This study aimed to evaluate different material used for cranial reconstruction in Oman. This retrospective study included all patients who had had cranioplasty procedures performed at Khoula Hospital, Muscat, Oman, from 2012 to 2022. Demographic information, the characteristics of the cranial defect and any complications that occurred post-operatively were analysed. A total of 47 patients were included in this study. The most common cause of cranial defects was craniectomy following traumatic head injury (70.2%) along with excision of fibrous dysplasia (10.6%). The most frequently utilised material for cranial repair was autologous bone grafts (n = 28), followed by polyetheretherketone (PEEK; n = 14). Interestingly, the replacement of bone grafts from previous craniectomy showed a notably high resorption rate (71.4%), in contrast to split calvarial grafts (0%) and other types of bone grafts (14.3%). Additionally, delayed graft infection was observed in 3.6% of the bone graft group and 7.1% of the PEEK group. Patient-specific alloplastic implants such as PEEK have gained popularity for large and complex cranioplasty, as they provide excellent aesthetic outcomes and leave no donor site morbidity. In contrast, bone grafts remain the gold standard for small to medium-sized cranial defects.

Stepwise degradable PGA-SF core-shell electrospinning scaffold with superior tenacity in wetting regime for promoting bone regeneration

Regenerating bone in the oral and maxillofacial region is clinically challenging due to the complicated osteogenic environment and the limitation of existing bone graft materials. Constructing bone graft materials with controlled degradation and stable mechanical properties in a physiological environment is of utmost importance. In this study, we used silk fibroin (SF) and polyglycolic acid (PGA) to fabricate a coaxial PGA-SF fibrous scaffold (PGA-SF-FS) to meet demands for bone grafts. The SF shell exerted excellent osteogenic activity while protecting PGA from rapid degradation and the PGA core equipped scaffold with excellent tenacity. The experiments related to biocompatibility and osteogenesis (e.g., cell attachment, proliferation, differentiation, and mineralization) demonstrated the superior ability of PGA-SF-FS to improve cell growth and osteogenic differentiation. Furthermore, in vivo testing using Sprague-Dawley rat cranial defect model showed that PGA-SF-FS accelerates bone regeneration as the implantation time increases, and its stepwise degradation helps to match the remodeling kinetics of the host bone tissue. Besides, immunohistochemical staining of CD31 and Col-1 confirmed the ability of PGA-SF-FS to enhance revascularization and osteogenesis response. Our results suggest that PGA-SF-FS fully utilizing the advantages of both components, exhibites stepwise degradation and superior tenacity in wetting regime, making it a promising candidate in the treatment of bone defects.

Phytic acid promotes high glucose-mediated bone marrow mesenchymal stem cells osteogenesis via modulating circEIF4B that sponges miR-186-5p and complexes with IGF2BP3

Diabetes-related hyperglycemia inhibits bone marrow mesenchymal stem cell (BMSC) function, thereby disrupting osteoblast capacity and bone regeneration. Dietary supplementation with phytic acid (PA), a natural inositol phosphate, has shown promise in preventing osteoporosis and diabetes-related complications. Emerging evidence has suggested that circular (circ)RNAs implicate in the regulation of bone diseases, but their specific regulatory roles in BMSC osteogenesis in hyperglycemic environments remain elucidated. In this study, in virto experiments demonstrated that PA treatment effectively improved the osteogenic capability of high glucose-mediated BMSCs. Differentially expressed circRNAs in PA-induced BMSCs were identified using circRNA microarray analysis. Here, our findings highlight an upregulation of circEIF4B expression in BMSCs stimulated with PA under a high-glucose microenvironment. Further investigations demonstrated that circEIF4B overexpression promoted high glucose-mediated BMSC osteogenesis. In contrast, circEIF4B knockdown exerted the opposite effect. Mechanistically, circEIF4B sequestered microRNA miR-186-5p and triggered osteogenesis enhancement in BMSCs by targeting FOXO1 directly. Furthermore, circEIF4B inhibited the ubiquitin-mediated degradation of IGF2BP3, thereby stabilizing ITGA5 mRNA and promoting BMSC osteogenic differentiation. In vivo experiments, circEIF4B inhibition attenuated the effectiveness of PA treatment in diabetic rats with cranial defects. Collectively, our study identifies PA as a novel positive regulator of BMSC osteogenic differentiation through the circEIF4B/miR-186-5p/FOXO1 and circEIF4B/IGF2BP3/ITGA5 axes, which offers a new strategy for treating high glucose-mediatedBMSCosteogenic dysfunction and delayed bone regeneration in diabetes.

Polyetheretherketone Implant Cranioplasty for Large Cranial Defects: A Seven-Year Follow-Up.

Goals of a cranioplasty include protection of the brain, restoration of normal appearance, and neurological function improvement. Although choice of materials for cranial remodeling has changed through the years, computer-designed polyetheretherketone (PEEK) implant has gained traction as a preferred material used for cranioplasty. However, long-term outcomes and complications of PEEK implants remain limited. The goal of this study was to report long-term clinical outcomes after PEEK implant cranioplasty. A retrospective chart review was performed on patients undergoing PEEK cranioplasty between January 2007 and February 2023. Preoperative, intraoperative, and postoperative data were collected and analyzed. Twenty-two patients were included in this study. Mean postoperative follow-up time was 83.45 months (range: 35.47-173.87). Before PEEK implant cranioplasty, patients with multiple cranial procedures had undergone a mean of 2.95 procedures. PEEK implant cranioplasty indications were prior implant infection (14) and secondary reconstruction of cranial defect (8). The mean implant size was 180.43cm2 (range: 68.00-333.06). Four patients received a 2-piece implant. Postoperative complications included: perioperative subgaleal self-resolving fluid collection in 1 patient, hematoma in another, and 3 infections resulting in explantations with successful reinsertion in 2 patients. Four of 5 patients with preoperative history of seizures reported improved seizures and all 4 patients with preoperative syndrome of the trephined reported improved symptoms and neurological function. At a mean follow-up of 7 years, most PEEK implants continued to provide protection to the brain and consistent symptom relief in patients suffering from prior postcraniectomy/craniotomy sequelae of seizures and syndrome of the trephined.

Comprehensive functional outcome analysis and importance of bone remodelling on personalized cranioplasty treatment using Poly(methyl methacrylate) bone flaps.

Cranioplasty involves the surgical reconstruction of cranial defects arising as a result of various factors, including decompressive craniectomy, cranial malformations, and brain injury due to road traffic accidents. Most of the modern decompressive craniectomies (DC) warrant a future cranioplasty surgery within 6-36months. The conventional process of capturing the defect impression and polymethyl methacrylate (PMMA) flap fabrication results in a misfit or misalignment at the site of implantation. Equally, the intra-operative graft preparation is arduous and can result in a longer surgical time, which may compromise the functional and aesthetic outcomes. As part of a multicentric pilot clinical study, we recently conducted a cohort study on ten human subjects during 2019-2022, following the human ethics committee approvals from the participating institutes. In the current study, an important aspect of measuring the extent of bone remodelling during the time gap between decompressive craniectomy and cranioplasty was successfully evaluated. The sterilised PMMA bone flaps were implanted at the defect area during the cranioplasty surgery using titanium mini plates and screws. The mean surgery time was 90 ± 20min, comparable to the other clinical studies on cranioplasty. No signs of intra-operative and post-operative complications, such as cerebrospinal fluid leakage, hematoma, or local and systemic infection, were clinically recorded. Importantly, aesthetic outcomes were excellent for all the patients, except in a few clinical cases, wherein the PMMA bone flap was to be carefully customized due to the remodelling of the native skull bone. The extent of physiological remodelling was evaluated by superimposing the pre-operative and post-operative CT scan data after converting the defect morphology into a 3D model. This study further establishes the safety and efficacy of a technologically better approach to fabricate patient-specific acrylic bone flaps with improved surgical outcomes. More importantly, the study outcome further demonstrates the strategy to address bone remodelling during the patient-specific implant design.

A facile Immunoregulatory Constructional Design by Proanthocyanidin Optimizing Directional Chitosan Microchannel.

Improving the interconnected structure and bioregulatory function of natural chitosan is beneficial for optimizing its performance in bone regeneration. Here, a facile immunoregulatory constructional design is proposed for developing instructive chitosan by directional freezing and alkaline salting out. The molecular dynamics simulation confirmed the assembly kinetics and structural features of various polyphenols and chitosan molecules. Along with the in vitro anti-inflammatory, antioxidative, promoting bone mesenchymal stem cell (BMSC) adhesion and proliferation performance, proanthocyanidin optimizing chitosan (ChiO) scaffold presented an optimal immunoregulatory structure with the directional microchannel. Transcriptome analysis in vitro further revealed the cytoskeleton- and immune-regulation effect of ChiO are the key mechanism of action on BMSC. The rabbit cranial defect model (Φ = 10mm) after 12 weeks of implantation confirmed the significantly enhanced bone reconstitution. This facile immunoregulatory directional microchannel design provides effective guidance for developing inducible chitosan scaffolds.

Congenital transsphenoidal meningocele in a newborn: A case report

IntroductionCongenital transsphenoidal meningocele is extremely rare.AimWe present a newborn who was found to have a large midline cystic mass protruding from a cleft palate.Case studyRadiological imaging showed a large cerebrospinal fluid mass herniating through a large anterior cranial fossa defect into the sphenoid sinus with extension to the nasal cavity through a cleft palate into the oral cavity.Results and discussionA bifrontal craniotomy and decompression of meningocele with dura repair was performed.ConclusionsThe child was discharged healthy postoperatively and on monthly follow-up and subsequently thriving well with improving neurological recovery.

Dimethyloxallyl glycine-loaded mesoporous bioactive glass/poly(D,L-lactide) composite scaffolds with ultrasound stimulation for promoting bone repair.

Introduction: Bone tissue engineering is considered the ideal approach for bone repair. Mesoporous bioactive glass (MBG) possesses the characteristics of high drug-loading capacity and bioactivity. Low-intensity pulsed ultrasound contributes to promoting fracture healing and bone defect repair, and dimethyloxalyl glycine (DMOG) is a small molecular inhibitor that can suppress prolyl hydroxylase, reducing the degradation of hypoxia-inducible factor. Methods: In this study, we proposed to prepare DMOG-loaded MBG/poly(D,L-lactide) composite scaffolds (DMOG-MBG/PDLLA) for promoting bone repair. The effects of ultrasound stimulation and DMOG release on the cell responses of rat bone marrow mesenchymal stem cells (BMSCs) and human umbilical vein endothelial cells (HUVECs) and bone repair in vivo were investigated. Results and Discussion: The results showed that both ultrasound stimulation and DMOG release could promote the proliferation, adhesion and differentiation of BMSCs and HUVECs, respectively. After the implantation of scaffolds in rat cranial bone defect model for 8 weeks, the results indicated that the combined ultrasound stimulation and DMOG release contributed to the highest ability for promoting bone repair. Hence, the DMOG-MBG/PDLLA scaffolds with ultrasound stimulation are promising for application in bone repair.

Giant Thoracolumbosacral Myelomeningocele: A Case Report

AbstractNeural tube defects are a broad spectrum of congenital developmental anomalies that include cranial defects and open and closed spinal dysraphism. Myelomeningocele is a common form of spinal dysraphism most commonly seen in the lumbosacral region. Giant myelomeningoceles are rare occurrences. We hereby present the case of a 7-month-old infant with a history of large swelling over the thoracic lumbar region (circumference of 42 cm and diameter of 12.5 cm) that was progressively increasing in size with occasional cerebrospinal fluid (CSF) leakage from the swelling. There was associated progressive increasing size of the head size circumference (51 cm) as well for the past 6 months. There was no movement of both lower limbs since birth without any sensation up to the groin. On evaluation, the infant was found to have gross hydrocephalous. The Evans index was 0.4 with Chiari 2 malformation and a giant thoracolumbosacral myelomeningocele. The patient underwent a low-pressure ventriculoperitoneal (VP) shunt on the right side, followed by the repair of the giant myelomeningocele. The post-op period was uneventful with no CSF leakage or skin necrosis. The infant was discharged on day 5. Giant myelomeningoceles are quite a challenge for neurosurgeons due to the high risk of skin edge necrosis, CSF leaks, meningoencephalitis, etc. Here we managed our case with utmost intraoperative surgical skills and postoperative management due to which our patient was discharged in a satisfactory condition without any complication. This case is supposed to be largest myelomeningocele in the world literature to date.

Bredigite bioceramic-based barrier membrane promotes guided bone regeneration by orchestrating an immuno-modulatory and osteogenic microenvironment

Barrier membranes play an important role in guided bone regeneration (GBR) and have been primarily considered as physical barriers. Due to their inherent “foreign body” properties, barrier membranes introduced during GBR procedures unavoidably modify the local immune microenvironment, with consequent impacts on osteogenesis. In bone tissue engineering applications, inorganic bioceramics have been shown to possess the abilities to modulate the local immune response and promote the differentiation of stem cells along osteogenic lineages. Moreover, these bioceramics can be easily incorporated into scaffold membranes, thus demonstrating significant potential as a barrier membrane material for GBR. Herein, an inorganic bredigite (BRT, Ca7MgSi4O16) bioceramic-containing scaffold was fabricated and characterized, and its effects on the immune response and osteogenesis during GBR were investigated. The results indicated that the BRT-containing scaffolds promoted the migration and osteogenic differentiation of bone marrow-derived stem cells (BMSCs). Single-cell RNA sequencing analysis indicated a unique microenvironment and subpopulation of BMSCs cultured on the BRT scaffolds, which exhibited increased osteo/chondrogenic and angiogenic differentiation potential. Furthermore, the BRT-containing scaffolds induced macrophage polarization into the pro-regenerative M2 phenotype, which subsequently promoted the migration and osteogenic differentiation of BMSCs. Additionally, in an in vivo rat model, the BRT-containing membrane was confirmed to enhance the immune microenvironment and support bone regeneration in a cranial critical-size defect. Collectively, these findings indicate that the BRT-containing scaffold membrane possesses dual immunomodulatory and osteogenic properties, offering a potentially beneficial GBR membrane for clinical application.

3D-printed near-infrared-light-responsive on-demand drug-delivery scaffold for bone regeneration

Although several bioactive 3D-printed bone scaffolds loaded with multiple kinds of biomolecules for enhanced bone regeneration have been recently developed, the manipulation of on-demand release profiles of different biomolecules during bone regeneration remains challenging. Herein, a 3D-printed dual-drug-loaded biomimetic scaffold to regulate the host stem cell recruitment and osteogenic differentiation in a two-stage process for bone regeneration was successfully fabricated. First, a chemotactic small-molecule drug, namely, simvastatin (SIM) was directly incorporated into the hydroxyapatite/collagen bioink for printing and could be rapidly released during the early stage of bone regeneration. Further, near-infrared (NIR)-light-responsive polydopamine-coated hydroxyapatite nanoparticles were designed to deliver the osteogenic drug, i.e., pargyline (PGL) in a controllable manner. Together, our scaffold displayed an on-demand sequential release of those two drugs and could optimize their therapeutic effects to align with the stem cell recruitment and osteoblastic differentiation, thereby promoting bone regeneration. The results confirmed the suitable mechanical strength, high photothermal conversion efficiency, good biocompatibility of our scaffold. The scaffold loaded with SIM could efficiently accelerate the migration of stem cells. In addition, the scaffold with on-demand sequential release promoted alkaline phosphatase (ALP) activity, significantly upregulated gene expression levels of osteogenesis-related markers, and enhanced new-bone-formation capabilities in rabbit cranial defect models. Altogether, this scaffold not only offers a promising strategy to control the behavior of stem cells during bone regeneration but also provides an efficient strategy for controllable sequential release of different biomolecule in bone tissue engineering.

Hierarchical Composite Scaffold with Deferoxamine Delivery System to Promote Bone Regeneration via Optimizing Angiogenesis.

A bone defect refers to the loss of bone tissue caused by trauma or lesion. Bone defects result in high morbidity and deformity rates worldwide. Autologous bone grafting has been widely applied in clinics as the gold standard of treatment; however, it has limitations. Hence, bone tissue engineering has been proposed and developed as a novel therapeutic strategy for treating bone defects. Rapid and effective vascularization is essential for bone regeneration. In this study, a hierarchical composite scaffold with deferoxamine (DFO) delivery system, DFO@GMs-pDA/PCL-HNTs (DGPN), is developed, focusing on vascularized bone regeneration. The hierarchical structure of DGPN imitates the microstructure of natural bone and interacts with the local extracellular matrix, facilitating cell adhesion and proliferation. The addition of 1 wt% of halloysite nanotubes (HNTs) improves the material properties. Hydrophilic and functional groups conferred by polydopamine (pDA) modifications strengthen the scaffold bioactivity. Gelatin microspheres (GMs) protect the pharmacological activity of DFO, achieving local application and sustained release for 7 days. DFO effectively promotes angiogenesis by activating the signaling pathway of hypoxia inducible factor-1 α. In addition, DFO synergizes with HNTs to promote osteogenic differentiation and matrix mineralization. These results indicate that DGPN promotes bone regeneration and accelerates cranial defect healing.

Scalp and Dural Reconstruction With a Tensor Fascia Lata Myofascial and Anterolateral Thigh Fasciocutaneous Chimeric Flap: A Case Report

Composite scalp and cranial defects present a challenge due to the unique elements that need to be reconstructed. The goals of reconstruction are to protect intracranial contents, prevent cerebrospinal fluid leak (CSF) and infection, and to provide durable soft tissue coverage. We present a case of an immunocompromised patient with history of craniotomy who developed osteomyelitis and a cranial abscess resulting in a composite defect with dural, bony, and soft tissue loss. To achieve vascularized watertight dural repair and durable soft tissue coverage for resolution of infection and eventual staged cranioplasty, we performed a free tensor fascia lata (TFL) myofascial and anterolateral thigh (ALT) fasciocutaneous chimeric flap. The patient healed well without CSF leak or infection at 5-month follow-up and cranioplasty is planned. Use of a chimeric TFL and ALT flap is effective in the treatment of large, composite cranial defects in the setting of active infection.

Calcium crosslinked macroporous bacterial cellulose scaffolds with enhanced in situ mineralization and osteoinductivity for cranial bone regeneration

The inherent biological inertness and lack of three-dimensional (3D) macroporous structures greatly hinder the use of pristine bacterial cellulose (BC) as a tissue engineering scaffold for bone regeneration. To address this issue, we developed a simple and effective strategy to fabricate a BC-based scaffold with excellent bioactivity and macroporous structure by crosslinking short-cut BC nanofibers using Ca2+. The Ca2+ crosslinked macroporous BC scaffold (MPBC@Ca) presents better structural stability due to the enhanced cellulose hydration. Importantly, the Ca2+ on the surface of BC nanofibers can serve as an active nucleation site to accelerate the deposition of hydroxyapatite (HAp), which is beneficial for the construction of biomimetic bone tissue extracellular matrix (ECM) microenvironment. The HAp-deposited MPBC@Ca scaffolds (HAp-MPBC@Ca) with biomimetic ECM microenvironment have excellent cytocompatibility and enhanced osteogenic differentiation of stem cells in vitro. Furthermore, the results of in vivo tests revealed that the HAp-MPBC@Ca scaffold has favorable osteoinductivity and accelerates cranial bone tissue regeneration. This study proposes a novel strategy to improve the bioactivity of BC and presents the great potential of biomimetic ECM microenvironment BC-based scaffold for repairing large cranial bone defects.

Hierarchical Scaffold with Directional Microchannels Promotes Cell Ingrowth for Bone Regeneration.

Bone regenerative scaffolds with a bionic natural bone hierarchical porous structure provide a suitable microenvironment for cell migration and proliferation. Here, a bionic scaffold (DP-PLGA/HAp) with directional microchannels is prepared by combining 3D printing and directional freezing technology. The 3D printed framework provides structural support for new bone tissue growth, while the directional pore embedded in the scaffolds provides an express lane for cell migration and nutrition transport, facilitating cell growth and differentiation. The hierarchical porous scaffolds achieve rapid infiltration and adhesion of bone marrow mesenchymal stem cells (BMSCs) and improve the expression of osteogenesis-related genes. The rabbit cranial defect experiment presents significant new bone formation, demonstrating that DP-PLGA/HAp offers an effective means to guide cranial bone regeneration. The combination of 3D printing and directional freezing technology might be a promising strategy for developing bone regenerative biomaterials.

Enhanced Osteogenic Activity and Antibacterial Properties of Graphene Oxide-Poly(Lactic Acid) Films for the Repair of Cranial Defects in Rats

The failure of bone defect repair caused by bacterial infection is a significant clinical challenge. However, the currently utilized bone graft materials lack antibacterial properties, necessitating the development of bone repair materials with both osteoinductive and antibacterial capabilities. Graphene oxide (GO) has garnered considerable attention due to its distinctive physical, chemical, and biological characteristics. In this study, we prepared a graphene oxide-poly(lactic acid) (GO-PLA) film with exceptional biological properties. In vitro investigations demonstrated that the GO-PLA film substantially enhanced the adhesion and proliferation capacity of rat bone marrow mesenchymal stem cells (rBMSCs). Furthermore, we observed augmented alkaline phosphatase activity as well as increased expression levels of osteogenic genes in rBMSCs cultured on the GO-PLA film. Additionally, we evaluated the antibacterial activity of our samples using gram-positive Streptococcus mutans (Sm) and gram-negative Actinobacillus actinomycetemcomitans (Aa). Our findings revealed that GO doping significantly inhibited bacterial growth. Moreover, implantation experiments conducted on rat skull defects demonstrated excellent guided bone regeneration performance exhibited by the GO-PLA film. Overall, our results indicate that the GO-PLA film possesses outstanding osteogenic and antibacterial properties, making it a promising biomaterial for bone tissue regeneration.

Aligned cryogel fibers incorporated 3D printed scaffold effectively facilitates bone regeneration by enhancing cell recruitment and function.

Reconstructing extensive cranial defects represents a persistent clinical challenge. Here, we reported a hybrid three-dimensional (3D) printed scaffold with modification of QK peptide and KP peptide for effectively promoting endogenous cranial bone regeneration. The hybrid 3D printed scaffold consists of vertically aligned cryogel fibers that guide and promote cell penetration into the defect area in the early stages of bone repair. Then, the conjugated QK peptide and KP peptide further regulate the function of the recruited cells to promote vascularization and osteogenic differentiation in the defect area. The regenerated bone volume and surface coverage of the dual peptide-modified hybrid scaffold were significantly higher than the positive control group. In addition, the dual peptide-modified hybrid scaffold demonstrated sustained enhancement of bone regeneration and avoidance of bone resorption compared to the collagen sponge group. We expect that the design of dual peptide-modified hybrid scaffold will provide a promising strategy for bone regeneration.