Copper Contamination Research Articles

Remediation of Agricultural Soils with Long-Term Contamination of Arsenic and Copper in Two Chilean Mediterranean Areas

Soil amendments may decrease trace element accumulation in vegetables, improving food security and allowing the recovery of contaminated farmlands. Despite some promising results in the laboratory, validation of soil amendments in field conditions are scarce, especially in aerobic soils. Here, we assessed the effect of different potential soil amendments on arsenic (As) accumulation in lettuces. Then, we compared them in terms of food security and the associated investment (efficacy and efficiency, respectively). We also hypothesized that the soil amendments do not lead to side effects, such as yield decrease, phytotoxicity of Cu, or undesired changes in soil properties. Thereby, we assessed lettuces grown on untreated contaminated soils (C+), treated contaminated soils, and untreated uncontaminated soils (C−) in two contrasting soil types (sandy and loamy soils). The treated contaminated soils consisted of multiple soil amendments. Soil amendments were: diammonium phosphate (DP), iron sulfate (IS), ferrous phosphate (FP), calcium peroxide (CP), and organic matter (OM). We found that phosphate amendments (DP and FP) reduced the As in edible tissues of lettuce in both areas, while CP only reduced As accumulation in the sandy soils area. The As intake through lettuces grown on these amended soils was about 30% lower than on the unamended ones. Cu concentrations in lettuces above 25 mg kg−1 grown in contaminated soils without reducing growth were found, a result that differed from non-field studies.

Mild Hydrothermal Synthesis of 11Å-TA from Alumina Extracted Coal Fly Ash and Its Application in Water Adsorption of Heavy Metal Ions (Cu(II) and Pb(II))

Non-biodegradable copper (Cu) and lead (Pb) contaminants in water are highly toxic and have series adverse effects. Therefore, it is very important to extract heavy metals from wastewater before it is discharged into the environment. Adsorption is a cost-effective alternative method for wastewater treatment. Choosing a low-cost adsorbent can help reduce the cost of adsorption. In this study, conversion of reside after extracting aluminum (REA) produced by sub-molten salt method transform high-alumina coal fly ash (CFA) into 11Å-tobermorite to adsorb Cu(II) and Pb(II) from aqueous solutions at room temperature. The synthesis of the adsorbent was confirmed using scanning electron microscope (SEM), X-ray diffractometer (XRD) and Brunauer–Emmett–Teller (BET) method surface analysis. To study the adsorption characteristics, factors such as initial Cu(II) and Pb(II) concentration, pH, contact time, adsorption characteristics and temperature were investigated in batch mode. The maximum adsorption capacity of Cu(II) and Pb(II) was 177.1 mg·g−1 and 176.2 mg·g−1, respectively. The Langmuir adsorption model was employed to better describe the isothermal adsorption behavior and confirm the monolayer adsorption phenomenon. The pseudo-second-order kinetic model was used to highlight Cu(II) and Pb(II) adsorption kinetics. Thermodynamic analysis indicated the removal Cu(II) and Pb(II) by TA-adsorbent was a nonspontaneous and exothermic reaction. The obtained results are of great significance to the conversion of industrial waste to low-cost adsorbent for Cu(II) and Pb(II) removal from water.

Versatile, Oxygen-Insensitive Surface-Initiated Anionic Polymerization to Prepare Functional Polymer Brushes in Aqueous Solutions.

Surface-initiated polymerization is an attractive approach to achieve desired interfacial compositions and properties on a wide range of substrates and surfaces. Due to mild reaction conditions, multiple surface-initiated polymerization methods, such as atom-transfer radical polymerization (ATRP), reversible addition-fragmentation chain-transfer polymerization, and so forth, have been developed and studied in academia and industry. However, the current methods require the combination of metal catalysts, special initiators, and oxygen removal. Herein, we developed a surface-initiated carbanion-mediated anionic polymerization (SI-CMAP), which can be conducted in aqueous solutions in the presence of oxygen without the need for metal catalysts. Zwitterionic 2-(N-3-sulfopropyl-N,N-dimethyl ammonium)ethyl methacrylate (SBMA) was selected as a model monomer to develop and demonstrate this strategy. The vinyl sulfone (VS) groups displayed on substrate surfaces reacted with N-methylimidazole (NMIM), which was used as the in situ initiator. The polymerization mechanism was extensively studied from many aspects at room temperature, including the changes in reaction conditions, factors affecting the polymerization extent, and substrate surfaces. We also demonstrated the compatibility of this method with a broad spectrum of monomers ranging from SBMA to other acrylates and acrylamides by using glycine betaine as a reaction additive. This method was also evaluated for the preparation of polymer-coated nanoparticles. For polymer-coated silica nanoparticles, their hydrodynamic diameter, copper contamination, and effects of salt and protein concentrations were compared with SI-ATRP in parallel. SI-CMAP in aqueous solutions in air and the absence of metal catalysts make this method sustainable and cost-effective. We believe that SI-CMAP can be readily adapted to the industrial surface coating and large-scale nanoparticle preparation under mild conditions.

Assessment of Arsenic and Copper Pollution of the Benya Lagoon, Ghana By Neutron Activation Analysis

Heavy metal concentrations in some water bodies and the soil beneath these waters. These would have detrimental consequences on these water users and consumers of the fish in that water. Instrumental Neutron Activation Analysis technique using the Ghana Research Reactor-1 was employed to find out the concentrations of two heavy metals, Arsenic (As) and Copper (Cu) in the sediments, fishes, and water collected from the Benya Lagoon in the KEEA, Ghana. Cumulatively, Copper was found to be greater in concentration than Arsenic concerning the three parts of the ecology under study. On the other hand, Arsenic was more concentrated in the sediments than Copper, and Copper was more concentrated in the water and fish than Arsenic. Cumulatively, the level of contamination of Arsenic and Copper decreased in the order fish > sediment > water. Though Arsenic and Copper were found in elevated amounts in both water and fish which rendered the Lagoon water unsuitable for human use and the fish from the Lagoon unsafe for consumption, their concentrations in the sediment were found to have a low ecological risk index on the environment.

Feather heavy metal contamination in various species of waterbirds from Asia: a review.

The amounts of certain heavy metals in waterfowl fluctuate depending on a number of factors. The use of feathers in heavy metal contamination studies is gaining popularity for several reasons, including the lack of need for deep freezing for sample preservation, the fact that it is a non-destructive, non-invasive method that does not require killing an individual, and the ability to predict lead and cadmium concentrations in internal tissues. A total of 22 publications from eight Asian countries including Pakistan, China, Hong Kong, India, Iran, South Korea, Indonesia, and Japan were identified and analysed in this study. The highest number of study sites were found from Pakistan (n = 12), followed by China (n = 9), Hong Kong, South Korea, and India (n = 7) each. A total of 10 heavy metals, viz cadmium, chromium, lead, copper, nickel, zinc, iron, mercury, selenium, and arsenic, have been identified for the review. Mercury (0.17-79.66ppm) has been studied in all 44 species, whereas selenium (0.98-4.88ppm) has only been studied in five species. Mercury (8.6ppm) contamination is highest in Painted Stork from India. Cadmium, lead, copper, and arsenic contamination was detected in the highest concentrations in Cattle Egret and Indian Pond Heron. The highest contamination of cadmium (41.1ppm), lead (296ppm), and arsenic (20ppm) were found in Cattle Egret from Pakistan. Chromium, nickel, and zinc contamination was highest in waders such as Marsh Sandpiper (114.7ppm), Little Ringed Plover (114.8ppm), and Little Stint (328.4ppm), respectively from India. Black-tailed Gull from South Korea had the highest contamination of Iron (4055.55ppm) and selenium (7.55ppm). Feather analysis is not an alternative of internal tissue analysis. It should be considered as an initial warning of the hazardous effects of the heavy metals in the waterbirds.

Ecotoxicological risk ranking of 19 metals in the lower Yangtze River of China based on their threats to aquatic wildlife

With thousands of chemicals discharged into the aquatic environment, it is necessary to identify those that are likely to be having the greatest impact on wildlife to better protect the ecosystem. A risk ranking approach was developed to compare the ecotoxicological risk of chemicals on aquatic wildlife with a wide range of environmental measurement data and ecotoxicity data. Nineteen metals including some rarely monitored ones including antimony (Sb), molybdenum (Mo), cobalt (Co), vanadium (V), titanium (Ti) and thallium (Tl) in the lower Yangtze River were risk ranked as a case study. The risk ranking approach was conducted in three tiers: general risk ranking, lethal effects vs. non-lethal effects risk ranking, and species group-specific risk ranking. Iron, copper and titanium were identified as being of greatest concern. The contamination of iron, zinc, copper and nickel was widespread and may have already harmed wildlife according to the overlap between ecotoxicity and monitored levels. Based on this analysis, the risk from copper and some rarely monitored metals (titanium and boron) may have been underestimated. Greater efforts to reduce copper, iron and titanium contamination could make an important difference to the health of Chinese freshwater organisms in the Yangtze River.

Visual Quantitation of Copper Ions Based on a Microfluidic Particle Dam Reflecting the Cu(II)-Catalyzed Oxidative Damage of DNA.

Due to the use of copper water pipes and the discharge of industrial wastewater, contamination of copper ions in drinking water has become a severe hazard globally. To routinely check water safety on a daily basis, easy-to-use platforms for quantitative analysis of trace amounts of copper ions (Cu2+) in drinking water is needed. Here, we report microfluidic particle accumulation integrated with a Cu(II)-catalyzed Fenton reaction for visual and quantitative copper ion detection. Microparticles (MMPs) and polystyrene microparticles (PMPs) are connected via a single strand DNA, MB155. However, when Cu2+ is present, MB155 is cleaved by hydroxyl free radicals (•OH) produced from Cu2+/hydrogen peroxide (H2O2) Fenton reactions, causing an increased amount of free PMPs. To visually count them, the particle solution is loaded onto a microfluidic chip where free MMPs and MMPs–MB155–PMPs can be collected by the magnetic separator, while the free PMPs continue flowing until being accumulated at the particle dam. The results showed a good linear relationship between the trapping length of PMP accumulation and the Cu2+ concentration from 0 to 300 nM. A limit of detection (LOD) of 70.1 nM was achieved, which is approximately 449 times lower than the 2 × 103 μg·L−1 (~31.5 μM) required by the World Health Organization (WHO). Moreover, the results showed high selectivity and good tolerance to pH and hardness, indicating compatibility for detection in tap water, suggesting a potential platform for the routine monitoring of copper contamination in drinking water.

The Impact of Surface Voltage on Photoluminescence Response for the Detection of Copper and Iron Contamination in Silicon

Herein, silicon substrates intentionally contaminated by iron and copper are analyzed by an innovative technique based on photoluminescence (PL) measurement, with the aim to evaluate the sensitivity of this technique to low level contamination and its capability for further in‐line monitoring during devices fabrication. Measurements are carried out directly after samples preparation, with the combined use of PL and corona discharges to separate the contribution of metallic contamination from interface properties on the PL signal. The sensitivity of PL to both iron and copper contamination in silicon with higher sensitivity when surface recombination is minimized is shown. Therefore, this work highlights the importance of surface properties monitoring for the optimization of PL detection of metallic contamination.

Structure and diversity of fungal communities in long-term copper-contaminated agricultural soil

Copper (Cu) contamination threatens the stability of soil ecosystems. As important moderators of biochemical processes and soil remediation, the fungal community in contaminated soils has attracted much research interest. In this study, soil fungal diversity and community composition under long-term Cu contamination were investigated based on high-throughput sequencing. The co-occurrence networks were also constructed to display the co-occurrence patterns of the soil fungal community. The results showed that the richness and Chao1 index both significantly increased at 50 mg kg−1 Cu and then significantly decreased at 1600 and 3200 mg kg−1 Cu. Soil fungal diversity was significantly and positively correlated with plant dry weight. Specific tolerant taxa under different Cu contamination gradients were illustrated by linear discriminant analysis effect size (LEfSe). Soil Cu concentration and shoot dry weight were the strongest driving factors influencing fungal composition. The relative abundance of arbuscular mycorrhizal fungi increased first and then declined along with elevating Cu concentrations via FUNGuild analysis. The interactions among fungi were enhanced under light and moderate Cu contamination but weakened under heavy Cu contamination by random matrix theory (RMT)-based molecular ecological network analysis. Penicillium, identified as a keystone taxon in Cu-contaminated soils, had the function of removing heavy metals and detoxification, which might be vital to trigger the resistance of the fungal community to Cu contamination. The results may facilitate the identification of Cu pollution indicators and the development of in situ bioremediation technology for contaminated cultivated fields.

In search for potential biomarkers of copper stress in aquatic plants.

Over the last few decades, the use of pesticides and discharge of industrial and domestic wastewater on water surfaces have increased. Especially, Copper (Cu) pollution in aquatic ecosystems could constitute a major health problem, not only for flora and fauna but also for humans. To cope with this challenge, environmental monitoring studies have sought to find Cu-specific biomarkers in terrestrial and aquatic flora and/or fauna. This review discusses the toxic effects caused by Cu on the growth and development of plants, with a special focus on aquatic plants. While copper is considered as an essential metal involved in vital mechanisms for plants, when in excess it becomes toxic and causes alterations on biomarkers: biochemical (oxidative stress, pigment content, phytochelatins, polyamines), physiological (photosynthesis, respiration, osmotic potential), and morphological. In addition, Cu has a detrimental effect on DNA and hormonal balance. An overview of Cu toxicity and detoxification in plants is provided, along with information regarding Cu bioaccumulation and transport. Awareness of the potential use of these reactions as specific biomarkers for copper contamination has indeed become essential.

Forms of Copper in the Aspect of Anthropogenic Changes in the Profiles of Horticultural Soils in the Cities of South-Eastern Poland

The aim of the research was to show the changes taking place in soils as a result of the influence of anthropogenic factors in the form of intensive horticulture and pollution within the city. It was made on the basis of the distribution of individual fractions as well as available and total Cu forms in the profiles of garden soils located at houses and in the family allotment gardens in six cities in south-eastern Poland. The research took into account the granulometric composition according to which the cities were divided into two groups. The pollution assessment was based on the concentration indicator, Igeo, and indicators taking into account the forms available for plants: Cav/Ct and BF. There was no copper contamination with regard to legislation act and Igeo. The role of organic matter as an important component in copper in the humus horizons of soils in long-term horticultural cultivation has been considered. The content of all forms of copper was higher in humus horizon which also indicated the anthropogenic changes. Among the two groups of soils, a greater impact of the treatments used in horticulture on those made of sands was found in relation to the silty ones.

Integrated biomarker responses of rice associated with grain yield in copper-contaminated soil

Copper (Cu) contamination in soil is an environmental issue that affects rice growth and development. This study investigated changes in photosynthetic capacities in combination with integrated biomarker responses at different growth stages of rice (Oryza sativa L. var. Hom Bai Toey) exposed to various concentrations of Cu. A randomized complete block design with four replications was used. Exposure to high copper concentrations of 200 Cu mg kg-1 of soil and more resulted in a marked decline in the photosynthetic efficiency of Photosystem II (Phi2) but increased yield of non-photochemical quenching (PhiNPQ) and yield of non-regulatory energy dissipation (PhiNO) at tillering and flowering stages. In addition, these concentrations induced a delay in the flowering of rice, as a consequence of stress experienced in early growth stage. Significant lipid peroxidation and leaf area reduction were observed with 400 Cu mg kg-1 treatment at flowering stage. Rice grain yield decreased significantly at copper concentrations of 200 and 400 mg kg-1. Overall, excess copper inhibited photosynthetic capacity, growth, and development of rice in the early growth stage, and synergistic effects of yield components contributed to final grain yield reduction at harvesting stage. In addition, calculated integrated biomarker response (IBR) values reflect well the severity of Cu toxicity with a decreasing order from tillering stage to harvesting stage.

Functionalized silver nanoparticle-decorated paper sensor for rapid colorimetric detection of copper ions in water

Copper contamination to water bodies is an environmental concern of significant risk due to its harmful effect on aquatic life forms and human beings. Herein, a paper-based colorimetric sensor was fabricated by immobilizing polyethyleneimine-capped silver nanoparticles (PEI-AgNPs) on commercial filter paper. The sensitivity and selectivity of the paper-based sensor’s colorimetric response to copper ions in water were investigated. PEI-AgNPs with an average diameter of 12.66 ± 4.07 nm were successfully immobilized on the filter paper by the simple dipping technique, as evidenced by the scanning electron microscopy with energy-dispersive x-ray result. A color change from pale yellow to dark yellow green was noted after exposing the paper sensor in a water sample with copper ions. This colorimetric response was exclusively observed for copper ions only, suggesting the selectivity of the paper sensor towards copper ions. Moreover, ultraviolet–visible spectroscopy results revealed that the detection limit of the paper sensor was observed to about 1.0 ppm. Meanwhile, color analysis on the sensor’s digital images revealed the linear response of the sensor with decreasing copper ion concentration down to 1.0 ppm. The selectivity of the sensor was also observed by the color intensity profile of the sensor. This work presents promising results that can be utilized as a reference for developing affordable, fast, portable, and reliable sensing devices for on-site water quality monitoring and other applications.

Assessment of Copper and Heavy Metals in Family-Run Vineyard Soils and Wines of Campania Region, South Italy.

Copper-based phytosanitary treatments are widely employed in viticulture for combating the fungal diseases of European grape (Vitis vinifera L.). Herein we evaluated copper accumulation in the soil of a 50-year-old still productive vineyard in South Italy in comparison with samples taken from a ‘control’ area in which grapevines had never been cultivated, as well from an abandoned vineyard, now planted with cereals and forage crops, both close to the main area under investigation. Even though the heavy metal contents detected were not of concern for soils nor for wine, Cu accumulates in the soil in amounts significantly higher than the (grapevine free) control and remains at detectable concentrations also in abandoned vineyards where spraying activities had ceased about 20 years before this study. Despite the long Cu residence times in soil, the wine produced with grapes of the same vineyard showed Cu levels low enough to be safely used for human consumption, probably due to mechanisms of metal precipitation occurring during wine maturation, which are typically accompanied by sedimentation processes in artisanal production. However, this should not diminish the urgency of decreasing the copper usage as antifungal remedy in viticulture to prevent copper contamination of the agricultural soils.

Influence of Copper Contamination on Soil Physico-chemical Properties, Microbial Population and Enzyme Activities

Heavy metals are known for their phytotoxicity and commonly used in agrochemicals to control plant pathogens. Accumulation of heavy metals in soil may occur through extensive use of heavy metal-based agrochemicals over time or from industrial pollution. However, this study was focussed on the immediate effect of the heavy metal, Copper (Cu) contamination on soil microbial population and soil enzyme activities (viz. acid phosphatase, β-glucosidase, urease & dehydrogenase). Soil with graded doses of Cu was prepared by treating soil samples with varying concentrations of Copper (ll) sulphatepentahydrate (CuSO4.5H2O) where three levels of CuSO4.5H2O (50, 100 & 200 mg/kg soil) treatments were formulated along with control. A significant decrease in soil microbial population and soil enzyme activities was observed in all treatments.

Effects of rice straw biochar and nitrogen fertilizer on ramie (Boehmeria nivea L.) morpho-physiological traits, copper uptake and post-harvest soil characteristics, grown in an aged-copper contaminated soil

Copper (Cu) contamination in soils is becoming a serious problem. Therefore, an experiment in plastic pots was carried out to investigate interactive influence of rice straw BC (BC0:0, BC1:5, and BC2:10% w/w) and nitrogen fertilizer (N0:0, N1:140, N2:280, and N3:420 kg ha − 1) on plant growth, Cu mobility and phytoavailability to Boehmeria nivea in Cu polluted soil. Results revealed that BC × N fertilizer had significantly (p ≤ 0.05) increased the growth of B. nivea in terms of biomass, height of plant, diameter of stem and number of leaves. Furthermore, BC × N fertilizer resulted in significant changes in pH, electrical conductivity and cation exchange capacity of soil after harvesting in comparison with control. However, the influence of BC × N fertilizer on soil extractable Cu and Cu uptake by plant varied with levels of N fertilizer. The BC2N1 treatment significantly increased the shoot biomass of B. nivea by 635% (fresh biomass) and 452% (dry biomass), but reduced Cu contents in roots, stems and leaves i.e., 52, 23 and 34 mg kg − 1, respectively. Thereby, high dose of BC along with low N fertilizer could be considered as an efficient soil amendment combination for Cu stabilization and higher biomass production of B. nivea in highly Cu contaminated soil.

Chemical contamination-mediated regime shifts in planktonic systems

Abrupt transitions leading to algal blooms are quite well known in aquatic ecosystems and have important implications for the environment. These ecosystem shifts have been largely attributed to nutrient dynamics and food web interactions. Contamination with heavy metals such as copper can modulate such ecological interactions which in turn may impact ecosystem functioning. Motivated by this, we explored the effect of copper enrichment on such regime shifts in planktonic systems. We integrated copper contamination to a minimal phytoplankton–zooplankton model which is known to demonstrate abrupt transitions between ecosystem states. Our results suggest that both the toxic and deficient concentration of copper in water bodies can lead to regime shift to an algal-dominated alternative stable state. Further, interaction with fish density can also lead to collapse of population cycles thus leading to algal domination in the intermediate copper ranges. Environmental stochasticity may result in state transition much prior to the tipping point and there is a significant loss in the bimodality on increasing intensity and redness of noise. Finally, the impending state shifts due to contamination cannot be predicted by the generic early warning indicators unless the transition is close enough. Overall the study provides fresh impetus to explore regime shifts in ecosystems under the influence of anthropogenic changes like chemical contamination.

EFFECTS OF COPPER TOXICITY ON DIFFERENT GROWTH ATTRIBUTES OF PHLOX DRUMMONDII

Heavy metal contamination is one of the major problems prevailing in environment. Copper in high concentration is considered to have serious effects on plant growth parameters which results in chlorosis, disturbed mineral uptake and stunted growth. A pot experiment was conducted to evaluate the ability of Phlox drummondii to tolerate and accumulate high copper doses. Plants were exposed to copper toxicity at three different concentrations (10 ppm, 20 ppm and 30 ppm) by using copper sulfate (CuSO4.5H2O). Results showed that chlorophyll-a, chlorophyll-b, total chlorophyll and carotenoids of treated plants decreased significantly (p˂0.05) with the increase of copper concentration. Selected copper levels showed no effect on plant height, number of leaves, leaf area and ascorbic acid (p>0.05). Relative water content increased significantly (p˂0.05) as compared to control plants. Copper uptake by roots of treated plants was greater as compared to control plants indicating Phlox drummondii ability to grow well in the copper contaminated soils and could be classified as copper tolerant plant. Copper tolerance by phlox was associated with its capacity to absorb and accumulate in roots preventing translocation of metal to other photosynthetic tissues. Therefore, Phlox drummondii has the characteristic to be used as hyperaccumulator by vegetating in copper contaminated soils. Further studies at genetic level would play a key role in understanding the tolerance mechanism of Phlox drummondii towards copper contamination.

Modified Filters with Penicillium chrysogenum Culture Enhance Removal of Copper and Iron Contaminants in Water

Development of a cost-effective and broad-based practical approach to wastewater treatment is of utmost importance, especially in developing countries. In this study, we investigated the efficacy of using Penicillium chrysogenum cells with sand filters for removal of heavy metals from contaminated water. This was done by setting up four treatments of modified fungal-based sand filter (FSF) containing 30 spores/mL, 40 spores/mL, 50 spores/mL and sand filter (SF) only. These preparations were used to treat deionized water simulated with two concentrations of copper and iron (5 and 10 mgL-1 respectively). These simulations were prepared to create commonly observed contamination levels in many water sources. Effluent reductions relative to treatments effects were analyzed using standard protocol for eight days under aseptic conditions. On the eighth day, it was observed that the copper concentration (10 mgL-1) was reduced to 0.106 mgL-1 in the 30 spores/mL treatment as compared to 0.198 mgL-1 observed in SF. It was also observed that copper concentrations were significantly reduced (p≤0.05) between treatments and the SF. There was also a significant reduction while comparing the metal removal in treatments after the second and eighth days. The general affinity range for iron in the four treatments was 30 > 40 > SF > 50, in that order has 94.26, 91.66, 87.98 and 85.48 as removal efficiency for iron (5 mgL-1) on the eighth day. P. chrysogenum is therefore a valuable biosorbent that can help improve the quality of wastewater by biosand filter treatment.

Influence of copper contamination on ablation damage of C/SiC composites under simulated thermal environment of arc heater

Carbon fiber (CF) reinforced silicon carbide composites (C/SiC) are high-performance lightweight and high-strength materials, rendering promise as hot-structure materials for high-speed aircraft. However, it is critical to evaluate the performance of C/SiC composites in simulated aerodynamic thermal environment due to the impure air of wind tunnel. Herein, we analyze the influence of copper contamination on ablation properties of C/SiC composites in arc heater. Failure mechanism of C/SiC composite is revealed by combining experimental results of static oxidation and theoretical evaluation of ablation process under arc heating. Overall, the presence of copper accelerates oxidation and glassification processes of SiC matrix by forming low-temperature compounds. In addition, the influence of fiber orientation on ablation damage of C/SiC composites is evaluated by combining the distribution of copper-containing phases, airflow distribution, and discrepancies in direction-based thermal conductivity. Results reveal that continuous CF-reinforced micro-zone ceramics resist airflow shear denudation. Furthermore, ablation behavior of needle-punched C/SiC composites under arc heating is discussed in detail.