Construction Of Biosensors Research Articles

Sustainable Electropolymerization of Zingerone and Its C2 Symmetric Dimer for Amperometric Biosensor Films.

Polymeric permselective films are frequently used for amperometric biosensors to prevent electroactive interference present in the target matrix. Phenylenediamines are the most commonly used for the deposition of shielding polymeric films against interfering species; however, even phenolic monomers have been utilized in the creation of these films for microsensors and biosensors. The purpose of this paper is to evaluate the performances of electrosynthesized polymers, layered by means of constant potential amperometry (CPA), of naturally occurring compound zingerone (ZING) and its dimer dehydrozingerone (ZING DIM), which was obtained by straight oxidative coupling reaction. The polymers showed interesting shielding characteristics against the main interfering species, such as ascorbic acid (AA): actually, polyZING exhibited an AA shielding aptitude comprised between 77.6 and 99.6%, comparable to that obtained with PPD. Moreover, a marked capability of increased monitoring of hydrogen peroxide (HP), when data were compared with bare metal results, was observed. In particular, polyZING showed increases ranging between 55.6 and 85.6%. In the present work, the molecular structures of the obtained polymers have been theorized and docking analyses were performed to understand their peculiar characteristics better. The structures were docked using the Lamarckian genetic algorithm (LGA). Glutamate biosensors based on those polymers were built, and their performances were compared with biosensors based on PPD, which is the most widespread polymer for the construction of amperometric biosensors.

Application of Nanozymes and its Progress in the Treatment of Ischemic Stroke.

Nanozymes are a new kind of material which has been applied since the beginning of this century, and its birth has promoted the development of chemistry, materials science, and biology. Nanozymes can be used as a substitute for natural enzyme and has a wide range of applications; therefore, it has attracted extensive attention from all sectors of the community, and the number of studies has constantly increasing. In this paper, we introduced the outstanding achievements in the field of nanozymes in recent years from the main function, the construction of nanozyme-based biosensors, and the treatment of ischemic stroke, and we also illustrated the internal mechanism and the catalytic principle. In the end, the obstacles and challenges in the future development of nanozymes were proposed.

Smartphone-assisted biosensor based on broom-like bacteria-specific magnetic enrichment platform for colorimetric detection of Listeria monocytogenes

Pathogenic bacteria contamination poses a major threat to human health. The detection of low-abundance bacteria in complex samples has always been a knotty problem, and high-sensitivity bacterial detection remains challenging. In this work, a novel magnetic platform with high enrichment efficiency for L. monocytogenes was developed. The magnetic platform was designed by branched polyglutamic acid-mediated indirect coupling of cefepime on magnetic nanoparticles (Cefe-PGA-MNPs), and the specific enrichment of low-abundance L. monocytogenes in real samples was achieved by an external magnet, with a capture efficiency over 90%. A controllable and highly active platinum-palladium nanozyme was synthesized and further introduced in the magnetic nanoplatform for the construction of enzymatic colorimetric biosensor. The total detection time for L. monocytogenes was within 100 min. The colorimetric signals generated by labelled nanozyme were corresponding to different concentrations of L. monocytogenes, with a limit of detection (LOD) of 3.1 × 101 CFU/mL, and high reliability and accuracy (with a recovery rate ranging from 96.5% to 116.4%) in the test of real samples. The concept of the developed method is applicable to various fields of biosensing that rely on magnetic separation platforms.

A promising tool for clinical diagnostics: Dual-emissive carbonized polymer dots based cross-linking enhanced emission for sensitive detection of alkaline phosphatase and butyrylcholinesterase

Compared with single signal readout, dual-signal readout commendably corrects the impact of systematic or background error, achieving more accurate results for the diagnosis of many diseases. This work aimed to design and prepare dual-emissive fluorescent probes for the construction of ratiometric fluorescence biosensors to detect liver disease biomarkers. Sodium alginate (SA) with numerous potential sub-fluorophores and active sites and 4,4′,4′′,4′′′-(porphine-5,10,15,20-tetrayl) tetrakis (benzoic acid) (TCPP) with macrocyclic conjugated structures were introduced to prepare the carbonized polymer dots (CPDs) with red/blue dual emission based on the cross-linking enhanced emission (CEE) effect and the luminescence of macrocyclic conjugated structures. The ratiometric fluorescence sensing systems were constructed by integrating the specific response of CPDs to Cu2+ and the affinity difference of Cu2+ to substrates or products of enzymes. The sensing systems, CPDs/Cu2+/PPi and CPDs/Cu2+/BTCh, were designed to detect liver disease biomarkers, alkaline phosphatase (ALP) and butyrylcholinesterase (BChE), respectively. The limit of detection for ALP and BChE was 0.35 U/L and 0.19 U/L, respectively. The proposed sensors were successfully applied to human serum samples from different health stages with satisfactory recoveries. These results demonstrate the successful design of a novel dual-emissive fluorescent probe and provide a feasible strategy for clinical detection.

Construction of electrochemical biosensors based on MoSe2@1T-MoS2 heterojunction for the sensitive and rapid detection of miRNA-155 biomarker in breast cancer

MiRNA-155 is a typical biomarker for breast cancer. Since its low concentration in the physiological environment and the limitations of conventional miRNA detection methods like Northern imprinting and RT-qPCR, convenient, real-time, and rapid detection methods are urgently needed. In this work, an electrochemical biosensor was constructed based on the flower-like MoSe2@1T-MoS2 heterojunction electrode material and specific RNA recognition probes, which can realize the rapid determination of miRNA-155 content with a wide detection range from 1 fM to 1 nM and a limit of detection (LOD) as low as 0.34 fM. Furthermore, the contents of miRNA-155 in blood samples of tumor-bearing mice and normal mice were measured as 724.93 pM and 21.42 pM, respectively by this biosensor, demonstrating its strong identification ability and miRNA-155 can be regarded as an ideal diagnostic marker. On this basis, a portable sensor platform was designed for on-site detection simulation and showed good recovery efficiency from 95.80% to 98.69%. Meanwhile, compared with the standard detection method RT-qPCR, the accuracy and reliability of the biosensor were verified, indicating that the biosensor has the potential to provide point-of-care testing (POCT) for the early diagnosis of breast cancer.

Construction of a Label-Free Ratiometric Biosensor Based on Target Recycling Amplification and Hg-ZnSe QDs for Assay of BChE and OPs.

Herein, we constructed a label-free ratiometric fluorescence biosensing strategy for the determination of butyrylcholinesterase (BChE) activity and organophosphorus (OPs) concentration. BChE promoted the hydrolysis of iodized s-butyrylthiocholine (BTCh) into a reducing substance thiocholine, which can decompose CoOOH nanosheets (CoOOH NSs) to Co2+. Subsequently, the single-stranded DNA (ssDNA) on the surface of CoOOH NSs was released. Then, ssDNA hybridized with hairpin DNA (h-DNA) and triggered the target recycling amplification process, producing large amounts of G-quadruplex. After adding thioflavin T (ThT), the target BChE was converted into activatable G-quadruplex/ThT with an amplified yellow fluorescence signal. The addition of OPs could significantly inhibit the hydrolysis of BTCh by BChE and thus unable to produce the yellow fluorescence G-quadruplex/ThT complex. Throughout the entire process, the fluorescence intensity of Hg-ZnSe QDs as a reference signal remained unchanged at 630 nm. Furthermore, this work provided an effective approach for detecting the BChE activity in serum samples and OPs in fruits and vegetables.

Construction of a Dendritic Nanoassembly-Based Fluorescent Biosensor for Electrostatic Interaction-Independent and Label-Free Measurement of Human Poly(ADP-ribose) Polymerase 1 in Lung Tissues.

Poly(ADP-ribose) polymerase 1 (PARP-1) is responsible for catalyzing the creation of poly(ADP-ribose) polymer and involved in DNA replication and repair. Sensitive measurement of PARP-1 is critical for clinical diagnosis. However, the conventional electrostatic attraction-based PAPR-1 assays usually involve laborious procedures, poor sensitivity, and false positives. Herein, we demonstrate the construction of a dendritic nanoassembly-based fluorescent biosensor for electrostatic interaction-independent and label-free measurement of human PARP-1 in lung tumor tissues. When PARP-1 is present, the specific double-stranded DNA (dsDNA)-activated PARP-1 transfers the ADP-ribosyl group from nicotinamide adenine dinucleotide (NAD+)/biotinylated NAD+ to the PARP-1 itself, resulting in the formation of biotinylated dsDNA-PARP-1-PAR polymer bioconjugates that can be captured by magnetic beads. Upon the addition of TdT, APE1, and NH2-modified T-rich probe, the captured dsDNAs with dual 3'-OH termini initiate TdT-activated APE1-mediated hyperbranched amplification to produce abundant dendritic DNA nanoassemblies that can be stained by SYBR Green I to generate a high fluorescence signal. This biosensor is characterized by a template-free, electrostatic interaction-independent, high sensitivity, and label-free assay. It enables rapid (less than 3 h) measurement of PARP-1 with a limit of detection of 4.37 × 10-8 U/μL and accurate measurement of cellular PARP-1 activity with single-cell sensitivity. Moreover, it is capable of screening potential inhibitors and discriminating the PARP-1 level in normal person tissues and lung cancer patient tissues, with great potential in PARP-1-related clinical diagnosis and drug discovery.

Differential identification of GSH for acute coronary syndrome using a colorimetric sensor based on nanoflower-like artificial nanozymes

The ability to detect glutathione (GSH) concentrations in human blood offered a simple and non-invasive method to monitor changes associated with cardiovascular diseases, cancers and diabetes. We showed the potential of employing catalytically active protein-directed nanoflower-like artificial nanozymes (apo-TF-MnOx NFs) by bio-mineralization method to produce simple and visible colorimetric sensor for GSH. The experiments proved that apo-TF-MnOx NFs exhibited peroxidase, catalase- and superoxide dismutase-like activities, but the most notable feature was the excellent peroxidase-like activity, which could efficiently catalyze the oxidation reaction of 3,3′,5,5′- tetramethylbenzidine (TMB) in the existence of hydrogen peroxide (H2O2) to generate a blue product. Some outcomes also indicated that the apo-TF-MnOx NFs had stronger peroxidase-like activity, which was proved by the Michaelis-Menten constant (Km) and maximum initial velocity (Vmax). Hence, we used the peroxidase-like activity to develop a GSH colorimetric biosensor. Fortunately, the colorimetric platform exhibited a sensitive response to H2O2 and GSH in the range of 5 μМ to 300 μМ and 0.5 μМ to 35 μМ with a limit of detection of 3.29 μM and 0.15 μM (S/N = 3) under optimal conditions. The feasibility of the simple method was confirmed by qualitative detection of H2O2 and GSH in blood samples from acute coronary syndrome patients. A key outcome of our study was the ability to realized differential identification of GSH for acute coronary syndrome and healthy human without invasive treatment which was an advantage over other methods. This work not only proposed a new type of nanozymes, but also showed the multiple advantages of the apo-TF-MnOx NFs for the construction of biosensors. Thus, we believe that apo-TF-MnOx NFs with strong peroxidase-like activity can be employed as nanozymes and be widely applied in the fields of medicine and biological sensors.

Glucose oxidation induced pH stimuli response controlled release electrochemiluminescence biosensor for ultrasensitive detection of CYFRA 21-1

Herein, a self on electrochemiluminescence (ECL) biosensor was constructed by pH stimuli response controlled release strategy, in which SiO2-PEI as the carrier, BSA/luminol-Ab2 as the encapsulated substance, gold nanoparticles (Au NPs) as the blocking cap, glucose as the inducer. In addition, CeO2–Au was used as catalyst, which generated more O2•- to increase the ECL signal. Under the action of voltage, the glucose was oxidized to gluconic acid, which induced the pH to decrease accordingly. Therefore, Au NPs were stimulated to fall from the surface of SiO2-PEI, releasing the BSA/luminol-Ab2 to realize self on mode. With such design, the constructed self on ECL biosensor owned an ultrasensitive detection capacity of CYFRA 21–1, showing an excellent linear relationship in the range of 0.001–100000 ng/L and 0.4 fg/mL low limit of detection (LOD). It provided an innovative idea for the biosensor construction to clinical detection of lung cancer.

Phosphorylation of Oligopeptides: Design of Ultra-Hydrophilic Zwitterionic Peptides for Anti-Fouling Detection of Nucleic Acids in Saliva.

The construction of low-fouling biosensors for assaying biomarkers in complex biological samples remains a challenge, and the key limitation is the lack of effective anti-fouling materials. Inspired by the biomimetic process of protein phosphorylation, we herein designed a new phosphorylated peptide modified with the dihydrogen phosphate (-PO4H2) group, which significantly increased the hydrophilicity and anti-fouling capability of the peptide when compared with natural and normal peptides. Molecular simulation (MS) illustrated that, compared with the -COOH and -NH2 groups, the -PO4H2 group formed the most numbers of hydrogen bonds and stronger hydrogen bonds with water molecules. As a result, the PO4H2-oligopeptide was proved by MS to be able to attract the greatest number of water molecules, so as to form a compact layer of H2O to resist further adsorption of nonspecific biomolecules. The modification of electrodes with the designed PO4H2-oligopeptides, in addition to the adoption of neutral peptide nucleic acids (PNAs) as the sensing probes, ensured the fabrication of anti-fouling electrochemical biosensors capable of detecting nucleic acids in complex saliva. The constructed anti-fouling biosensor was able to detect the nucleic acid of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in undiluted saliva, with a wide linear response range (0.01 pM-0.01 μM) and a low limit of detection (LOD) of 3.4 fM (S/N = 3). The phosphorylation of oligopeptides offers an effective strategy to designing ultra-hydrophilic peptides suitable for the construction of promising anti-biofouling biosensors and bioelectronics.

Implementing Logic Gates by DNA Crystal Engineering.

DNA self-assembly computation is attractive for its potential to perform massively parallel information processing at the molecular level while at the same time maintaining its natural biocompatibility. It has been extensively studied at the individual molecule level, but not as much as ensembles in 3D. Here, the feasibility of implementing logic gates, the basic computation operations, in large ensembles: macroscopic, engineered 3D DNA crystals is demonstrated. The building blocks are the recently developed DNA double crossover-like (DXL) motifs. They can associate with each other via sticky-end cohesion. Common logic gates are realized by encoding the inputs within the sticky ends of the motifs. The outputs are demonstrated through the formation of macroscopic crystals that can be easily observed. This study points to a new direction of construction of complex 3D crystal architectures and DNA-based biosensors with easy readouts.

Rolling circle transcription amplification-directed construction of tandem spinach-based fluorescent light-up biosensor for label-free sensing of β-glucosyltransferase activity

β-glucosyltransferase (β-GT) can specifically catalyze the conversion of 5-hydroxymethylcytosine (5-hmC) to 5-glucosylhydroxy methylcytosine (5-ghmC), and it is associated with the control of phage-specific gene expression by affecting transcription process in vivo and in vitro. The current strategies for β-GT assay usually involve expensive equipment, laborious treatment, radioactive hazard, and poor sensitivity. Here, we report a Spinach-based fluorescent light-up biosensor for label-free measurement of β-GT activity by utilizing 5-hmC glucosylation-initiated rolling circle transcription amplification (RCTA). We design a 5-hmC-modified multifunctional circular detection probe (5-hmC-MCDP) that integrates the functions of target-recognition, signal transduction, and transcription amplification in one probe. The introduction of β-GT catalyzes 5-hmC glucosylation of 5-hmC-MCDP probe, protecting the glucosylated 5-mC-MCDP probe from the cleavage by MspI. The remaining 5-hmC-MCDP probe can initiate RCTA reaction with the aid of T7 RNA polymerase, generating tandem Spinach RNA aptamers. The tandem Spinach RNA aptamers can be lightened up by fluorophore 3,5-difluoro-4-hydroxybenzylidene imidazolinone, facilitating label-free measurement of β-GT activity. Notably, the high specificity of MspI-catalyzed cleavage of nonglucosylated probe can efficiently inhibit nonspecific amplification, endowing this assay with a low background. Due to the higher efficiency of RCTA than the canonical promoter-initiated RNA synthesis, the signal-to-noise ratio of RCTA is 4.6-fold higher than that of linear template-based transcription amplification. This method is capable of sensitively detecting β-GT activity with a limit of detection of 2.03 × 10-5 U/mL, and it can be used for the screening of inhibitors and determination of kinetic parameters, with great potential in epigenetic research and drug discovery.

Multivariate Optimization of Electrochemical Biosensors for the Determination of Compounds Related to Food Safety-A Review.

We summarize the application of multivariate optimization for the construction of electrochemical biosensors. The introduction provides an overview of electrochemical biosensing, which is classified into catalytic-based and affinity-based biosensors, and discusses the most recent published works in each category. We then explore the relevance of electrochemical biosensors for food safety analysis, taking into account analytes of different natures. Then, we describe the chemometrics tools used in the construction of electrochemical sensors/biosensors and provide examples from the literature. Finally, we carefully discuss the construction of electrochemical biosensors based on design of experiments, including the advantages, disadvantages, and future perspectives of using multivariate optimization in this field. The discussion section offers a comprehensive analysis of these topics.

Nuclear lamina strain states revealed by intermolecular force biosensor

Nuclear lamins have been considered an important structural element of the nucleus. The nuclear lamina is thought both to shield DNA from excessive mechanical forces and to transmit mechanical forces onto the DNA. However, to date there is not yet a technical approach to directly measure mechanical forces on nuclear lamins at the protein level. To overcome this limitation, we developed a nanobody-based intermolecular tension FRET biosensor capable of measuring the mechanical strain of lamin filaments. Using this sensor, we were able to show that the nuclear lamina is subjected to significant force. These forces are dependent on nuclear volume, actomyosin contractility, functional LINC complex, chromatin condensation state, cell cycle, and EMT. Interestingly, large forces were also present on nucleoplasmic lamins, indicating that these lamins may also have an important mechanical role in the nucleus. Overall, we demonstrate that the nanobody-based approach allows construction of biosensors for complex protein structures for mechanobiology studies.

Electrochemical Characterization Using Biosensors with the Coagulant Moringa oleifera Seed Lectin (cMoL).

Triturated Moringa oleifera seeds have components that adsorb recalcitrant indigo carmine dye. Coagulating proteins known as lectins (carbohydrate-binding proteins) have already been purified from the powder of these seeds, in milligram amounts. The coagulant lectin from M. oleifera seeds (cMoL) was characterized by potentiometry and scanning electron microscopy (SEM) using MOFs, or metal-organic frameworks, of [Cu3(BTC)2(H2O)3]n to immobilize cMoL and construct biosensors. The potentiometric biosensor revealed an increase in the electrochemical potential resulting from the Pt/MOF/cMoL interaction with different concentrations of galactose in the electrolytic medium. The developed aluminum batteries constructed with recycled cans degraded an indigo carmine dye solution; the oxide reduction reactions of the batteries generated Al(OH)3, promoting dye electrocoagulation. Biosensors were used to investigate cMoL interactions with a specific galactose concentration and monitored residual dye. SEM revealed the components of the electrode assembly steps. Cyclic voltammetry showed differentiated redox peaks related to dye residue quantification by cMoL. Electrochemical systems were used to evaluate cMoL interactions with galactose ligands and efficiently degraded dye. Biosensors could be used for lectin characterization and monitoring dye residues in environmental effluents of the textile industry.

Electrochemical aptasensors for pathogenic detection toward point-of-care diagnostics.

A biosensor system refers to a biomedical device, which detects biological, chemical, or biochemical components by converting those signals to an electrical signal by utilizing and uniting physical or chemical transducer with biorecognition elements. An electrochemical biosensor is generally based on the reaction of either production or consumption of electrons under a three-electrode system. Biosensor systems are exploited in a wide range of areas, such as medicine, agriculture, husbandry, food, industry, environment protection, quality control, waste disposal, and the military. Pathogenic infections are the third leading cause of death worldwide after cardiovascular diseases and cancer. Therefore, there is an urgent need for effective diagnostic tools to control food, water, and soil contamination result in protecting human life and health. Aptamers are peptide or oligonucleotide-based molecules that show very high affinity to their targets that are produced from large pools of random amino acid or oligonucleotide sequences. Generally, aptamers have been utilized for fundamental sciences and clinical implementations for their target-specific affinity and have been intensely exploited for different kinds of biosensor applications for approximately 30 years. The convergence of aptamers with biosensor systems enabled the construction of voltammetric, amperometric, and impedimetric biosensors for the detection of specific pathogens. In this review, electrochemical aptamer biosensors were evaluated by discussing the definition, types, and production techniques of aptamers, the advantages of aptamers as a biological recognition element against their alternatives, and a wide range of aptasensor examples from literature in the detection of specific pathogens.

MoBioS: Modular Platform Technology for High-Throughput Construction and Characterization of Tunable Transcriptional Biological Sensors.

All living organisms have evolved and fine-tuned specialized mechanisms to precisely monitor a vast array of different types of molecules. These natural mechanisms can be sourced by researchers to build Biological Sensors (BioS) by combining them with an easily measurable output, such as fluorescence. Because they are genetically encoded, BioS are cheap, fast, sustainable, portable, self-generating and highly sensitive and specific. Therefore, BioS hold the potential to become key enabling tools that stimulate innovation and scientific exploration in various disciplines. However, the main bottleneck in unlocking the full potential of BioS is the fact that there is no standardized, efficient and tunable platform available for the high-throughput construction and characterization of biosensors. Therefore, a modular, Golden Gate-based construction platform, called MoBioS, is introduced in this article. It allows for the fast and easy creation of transcription factor-based biosensor plasmids. As a proof of concept, its potential is demonstrated by creating eight different, functional and standardized biosensors that detect eight diverse molecules of industrial interest. In addition, the platform contains novel built-in features to facilitate fast and efficient biosensor engineering and response curve tuning.

Recent Advances in Conjugated Polymer-Based Biosensors for Virus Detection

Nowadays, virus pandemics have become a major burden seriously affecting human health and social and economic development. Thus, the design and fabrication of effective and low-cost techniques for early and accurate virus detection have been given priority for prevention and control of such pandemics. Biosensors and bioelectronic devices have been demonstrated as promising technology to resolve the major drawbacks and problems of the current detection methods. Discovering and applying advanced materials have offered opportunities to develop and commercialize biosensor devices for effectively controlling pandemics. Along with various well-known materials such as gold and silver nanoparticles, carbon-based materials, metal oxide-based materials, and graphene, conjugated polymer (CPs) have become one of the most promising candidates for preparation and construction of excellent biosensors with high sensitivity and specificity to different virus analytes owing to their unique π orbital structure and chain conformation alterations, solution processability, and flexibility. Therefore, CP-based biosensors have been regarded as innovative technologies attracting great interest from the community for early diagnosis of COVID-19 as well as other virus pandemics. For providing precious scientific evidence of CP-based biosensor technologies in virus detection, this review aims to give a critical overview of the recent research related to use of CPs in fabrication of virus biosensors. We emphasize structures and interesting characteristics of different CPs and discuss the state-of-the-art applications of CP-based biosensors as well. In addition, different types of biosensors such as optical biosensors, organic thin film transistors (OTFT), and conjugated polymer hydrogels (CPHs) based on CPs are also summarized and presented.

Ultrathin Conductive Bithiazole‐Based Covalent Organic Framework Nanosheets for Highly Efficient Electrochemical Biosensing

AbstractCovalent organic frameworks (COFs) with unique structural merits show substantial potential in the construction of biosensors. However, high‐performance COF‐based biosensors have rarely been reported due to special requirements for electrochemical biosensing. Here, the ultrathin nitrogen and sulfur‐rich bithiazole‐based COF nanosheets (COF‐Bta‐NSs) with the thickness of ≈1.95 nm are developed by using an interfacial perturbation growth strategy, and are further integrated with acetylcholinesterase (AChE) through strong supramolecular interactions to construct a high‐performance biosensor for organophosphorus pesticides (OPs) detection. By virtue of the excellent electrical conductivity and abundant edge unsaturated sites of COF‐Bta‐NSs, such unique biosensors can be used for the detection of various OPs, showing a wide detection range, ultralow detection limit, and high stability. Significantly, the portable biosensing device is further set up based on commercialized screen‐printed electrode (SPE), which is sensitive and reliable with the actual samples collected from river water and leafy vegetables, confirming the practical applicability. This research provides a novel insight into the development of advanced COF‐based biosensors with excellent performance for biological and environmental analysis.

A Versatile PdRu Bimetallic Nanoenzyme-Integrated Enzyme-Linked Immunosorbent Assay for Highly Sensitive Escherichia coli O157:H7 Detection.

Nanozymes have drawn much attention as an enzyme mimetic with low cost and stability in enhancing analytical performance. Herein, a peroxidase-mimicking nanozyme-improved enzyme-linked immunosorbent assay (ELISA) was developed employing the bimetallic PdRu nanozyme to replace the natural enzymes as a catalytic carrier for the sensing of Escherichia coli O157:H7 (E. coli O157:H7). The PdRu nanozyme displayed ultrahigh catalytic activity, possessing a catalytic rate that was 5-fold higher than horseradish peroxidase (HRP). In addition, PdRu exhibited great biological affinity with antibody (affinity constant was about 6.75 × 1012 M) and high stability. All those advantages ensure the successful establishment and the construction of a novel colorimetric biosensor for E. coli O157:H7 detection. PdRu-based ELISA not only achieved an ultrasensitive detection sensitivity (8.7 × 102 CFU/mL) by approximately 288-fold as compared to the traditional HRP-based ELISA and also possessed satisfactory specificity and reproducibility (relative standard deviation (RSD) < 10%). Furthermore, the feasibility of PdRu-ELISA was further evaluated by detecting E. coli O157:H7 in actual samples with satisfactory recoveries, indicating its potential for applications in bioassays and clinical diagnostics.