Sawdust Composites Research Articles

Preparation and property study of sawdust-modified cement mortar

Sawdust, a solid waste generated during stone processing, poses a serious threat to the environment with its untreated accumulation. This paper first analyzes the chemical composition and physical properties of sawdust, and discusses its mechanism of action in cement mortar. By systematically optimizing the blending ratio and modification method of sawdust, the sawdust-modified cement mortar with excellent performance was prepared. This study evaluates the key performance indicators of sawdust-modified cement mortar, such as compressive strength, flexural strength, and durability, through a series of experiments. The experimental results indicate that the incorporation of an appropriate amount of sawdust significantly enhances the mechanical properties of cement mortar, while also improving its durability, particularly in terms of freeze-thaw resistance. Microstructural analysis reveals the mechanism by which sawdust improves the pore structure of cement mortar; the active components in the sawdust react with the hydration products of cement, resulting in the formation of crystalline structures with higher strength.Therefore, the use of sawdust as a modifier in cement mortar can improve its mechanical properties and durability, while simultaneously reducing the accumulation of solid waste and promoting the sustainable development of building materials.

Multi-objective optimization of turning process parameters and wood sawdust contents using response surface methodology for the minimized surface roughness of recycled plastic/wood sawdust composites

The objective of this work was to investigate the effect and optimization of turning parameters such as spindle speed, feed rate, and depth of cut as well as wood sawdust content on the roughness quality of wood-plastic composites (WPCs). The Box–Behnken design and response surface methodology were used in experiments. Three roughness parameters, namely average roughness (Ra), root mean square average of roughness (Rq), and average maximum height (Rz) were employed to evaluate the surface quality of WPC samples. Based on the findings of the experiments, the Ra, Rq, and Rz values reduced with increasing spindle speed in a range of 430 to 1030 rpm, whereas the values increased when increasing the feed rate in a range of 0.05 to 0.15 mm/min. Also, an increase in depth of cut ranging from 1 to 3 mm and WPCs with a higher amount of wood sawdust in a range of 30 to 50 wt% raised their surface roughness. Finally, optimal conditions for the turning of the WPCs were determined to comprise a spindle speed of 781 rpm, a feed rate of 0.05 mm/min, a depth of cut of 2.8 mm, and wood sawdust content of 30 wt% with the highest desirability score of 1.000. Under such conditions, the sample had Ra, Rq, and Rz values of 1.8, 2.2, and 11.3 µm, respectively. The optimal conditions for turning can be used to effectively process different WPC products into various shapes.

PEMANFAATAN WASTE PENGOLAHAN AIR SEBAGAI AIR UMPAN BOILER PT. NLP

NLP isafurniture manufacturing company that uses three types of wood, namely mahogany, pine, and teak. Handling and processing sawdust waste is a challenge that needs to be overcome effectively so that the waste can become a product that has added value. The value-dded product in question is souvenir craft. The utilization of coarse sawdust can be mixed with epoxy resin to form composite materials, which can be used as the basic material for souvenir crafts. It is known that the strength of composite materials increases with the increasing composition of the resin in composite materials, and the character of composite materials If the composition of sawdust is higher, the resulting composite material will be opaque and lighter. Then the manufacture of composite materials will use a ratio of 1:1. Regional attributes, cultural elements, innovation in form, design, and ease of application are important factors to consider when designing a product for souvenirs. The collected data is needed to be translated into the interpretation of product requirements to be used in making the Objective Tree and Morphological Diagrams. Evaluation of alternative product designs is carried out by considering the minimum risks.

Влияние питательного субстрата на рост и распределение биомассы сеянцев Picea obovata Ledeb. в Северной Монголии

The development of seedling production technology and methods of establishing highyielding plantations of Picea obovata Ledeb. on a scientific basis is one of the urgent problems of forestry in Mongolia. In this study, we aimed to solve the following problems: to conduct a comparative analysis of the seedling growth parameters and biomass accumulation grown on different nutrient substrates; to assess the relationship between seedling growth, biomass accumulation and soil properties; to determine the most optimal nutrient substrates for seedling production of Siberian spruce in greenhouse conditions in Northern Mongolia. Six formulations of nutrient substrates (T1, Т2, Т3, Т4, Т5, Т6) were used for the seedling production of Picea obovata Ledeb. in greenhouses equipped with a sprinkler system. Nutrient substrates were prepared using black soil, manure, compost, peat, sawdust, sand in different composition ratios. During the 4-year-observation period height, root collar diameter, root length and aboveground and belowground biomass of seedlings were measured at the end of each growing season. We divided the biomass of seedlings into several structural elements. We found that all tested nutrient substrates, except the control substrate, had a positive effect on seedling growth in height and diameter. Comparative analyses showed that different ratio and composition of black soil, compost, manure, sawdust, and sand in the nutrient substrate had different effects on seedling growth (p > 0.001) and biomass accumulation (p > 0.001). Among the proposed nutrient substrates, the treatments T2 (50 % black soil + 20 % sand + 20 % peat + 10 % compost) and T6 (60 % black soil + 20 % sand + 10 % peat + 10 % compost) were selected as the most effective soil substrate that are suitable for further seedling production of Siberian spruce under greenhouse conditions in Mongolia. There fore, it was observed that good root system development was a determinant of seedling growth in height, diameter, and aboveground biomass accumulation especially from 3–4 years of age. Spruce seedling growth was positively correlated not only with humus content (r = 0.46), but also with soil acidity (r = 0.43) and available phosphorus (r = 0.48). The results of this investigation made an important contribution to the development of production technology for growing standard and large-sized seedlings of Picea obovata in greenhouse complexes in Northern Mongolia. For citation: Jagdag D., Batsaikhan G., Baatarbileg N., Lobanov A.I., Gerelbaatar S. Effect of Nutrient Substrate on Seedling Growth and Biomass Allocation of Picea obovata Ledeb. in Northern Mongolia. Lesnoy Zhurnal = Russian Forestry Journal, 2023, no. 6, pp. 57–69. (In Russ.). https://doi.org/10.37482/0536-1036-2023-6-57-69

Polyphenol Content, Antioxidant, and Antibiotic Activities of Pinus Caribaea Morelet Forestry Coproducts

Context and objective In the context of valorization of wood waste from the timber industry, this work aims to study the chemical composition and to evaluate the biological capacities of coproducts from Pinus caribaea Morelet. Methods With this mind, sawdust, bark, and knot-wood from P caribaea were analyzed by high-performance liquid chromatography-mass spectrometry. The antioxidant activities of extracts and reference compounds were assessed in vitro using 2 methods: 2.2-diphenyl-1-picrylhydrazyl and 2.2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid). For antimicrobial evaluation, coproduct extracts were assayed against Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli, and Candida albicans. Results Despite the variable composition of sawdust, bark, and knot-wood, the composition of P caribaea is typical of the Pinus genus, with the presence of flavonoids, stilbenes, and lignans. Seven compounds were elucidated: 2 lignans (nortrachelogenin and matairesinol), 3 flavonoids (pinocembrin, pinobanksin, pinobanksin 3-acetate), 2 stilbenes (pinosylvin, pinosylvin monomethyl ether), and 1 phenolic acid (caffeic acid). Conclusion The ethanolic extracts of bark and knots showed significant antioxidant activity. The knots showed significant antibacterial properties against S epidermidis.

Influence of the chemical content of sawdust on the levels of important macronutrients and ash composition in Pearl oyster mushroom (Pleurotus ostreatus).

Influence of chemical composition of sawdust on the nutritional profile of oyster mushrooms (Pleurotus ostreatus) has yet to receive significant research attention. This information will help mushroom growers to select specific sawdust for the production of mushroom with desired dietary preferences. This study assessed the influence of the chemical composition of sawdust on the macronutrients and ash content of the pearl oyster mushrooms. The American Standard for Testing Materials and other widely accepted protocols were used to determine the C-N ratio, pH, lignin, hemicellulose and cellulose contents of mixed sawdust from tropical wood species. The study evaluated the fat, crude fibre, crude protein, carbohydrate, and ash content of the oyster mushroom cultivated on the sawdust. Cellulose constituted the largest component of the sawdust (47.82%), followed by lignin (33.29%). The yield of the mushroom (on 0.05 kg of sawdust) ranged from 490.1 to 540.9 g (biological efficiency: 44-50%); the average carbohydrates constituent in the mushroom was 56.28%. pH of the sawdust influenced the crude protein, carbohydrate, fat and ash content of oyster mushrooms (p<0.05) most significantly. The hemicelluloses also had a significant effect (p<0.05) on the mushroom's minerals, fat and crude fiber content. The study revealed that the mushroom producers would likely obtain high protein content using sawdust with low pH (slightly acidic to slightly basic) in the oyster mushroom. Mushrooms grown on substrates, rich in hemicelluloses, had low fat and high crude fiber content.

Experimental Study of Model Refuse-Derived Fuel Pellets Swelling during Heating and Combustion

Composites of sawdust and crushed polyethylene were obtained by pressing at 5–10 atm. The resulting pellets with a size of about 10–20 mm were then burned in airflow in a muffle furnace at a temperature of 800 °C. The combustion process was recorded, and obtained video data were analyzed. The data obtained made it possible to estimate the change in particle size at different stages of combustion. An increase in linear dimensions during conversion was achieved of up to 2 times. Particle swelling led to a decrease in mechanical strength and destruction of particles before complete burnout.

The utilization of silica sand and clay with the addition of sawdust as raw material for manufacturing ceramic membranes to reduce TSS and TDS levels of peat water

Peat water is abundant in Riau Province. The amount has the potential to be processed into clean water but is constrained by the condition of peat water, which is not good for health. Therefore, it is necessary to process it first so that the community can use it. Ceramic membrane technology is one of the alternative technologies that are easy and inexpensive to use to purify peat water. The quality of peat water can be improved by filtering out contaminants using ceramic membranes, which have porous media. This work combined silica sand, clay, and sawdust with varied compositions to create ceramic membranes. This study aims to: combine clay, sawdust, and silica sand with varied composition to create ceramic membrane; find the ideal composition (optimal ratio) of clay, sawdust, and silica sand; and reduce the TDS and TSS levels of peat water at Ujung Batu Street, Farmer Field, Mandau District. Ceramic membranes were created for 4 h at a burning temperature of 700 °C and had a plate-shaped membrane of 11 cm in diameter and 0.5 cm in height. The composition ratios of the materials in this study are (silica sand: clay: sawdust) M1 = 58%:38%:4%, M2 = 48%:48%:4%, and M3 = 38%:58%:4%. Based on the results of this study, the best ceramic membrane for rejecting TSS is a membrane with a composition of silica sand: clay: sawdust (38%: 58%: 4%) of 26.97%, and the ceramic membrane that produces the highest flux for peat water is the membrane with a composition of 58%:38%:4% of 879 × 10-4 l/m2.hour. The ceramic membrane succeeded in reducing the TDS level of peat water by 10.36% and the TSS level of peat water by 26.97%.

Physicomechanical Properties of Sustainable Wood Plastic Composites of Tropical Sawdust and Thermoplastic Waste for Possible Utilization in the Wood Industry

Physicomechanical Properties of Sustainable Wood Plastic Composites of Tropical Sawdust and Thermoplastic Waste for Possible Utilization in the Wood Industry

Modification of fountain bed dryer for sawdust drying for fuel pellets production

This article presents the results of research works obtained during the drying process of sawdust/pine shavings in a fountain dryer designed and adapted for drying various types of materials with different morphology. Before the drying process, tests were carried out to determine the main parameters of the fountain dryer for drying sawdust and pine shavings. The principles of operation of a fountain dryer are described and discussed. The characteristics of the wooden by-product resulting from sawing are also presented, specifying parameters such as calorific value, ash content, chemical composition, grain composition and specific surface of sawdust. The drying curves and the emission of volatile organic compounds and polycyclic aromatic hydrocarbons were determined at the temperatures of 100, 125, 150, and 175 °C, respectively. Pellets were made of the sawdust material dried in the designed fountain dryer and its functional properties, i.e., physical and bulk density, kinetic strength and composition of exhaust gases obtained after combustion, were determined.

Lead and Cadmium Ions Mitigation in Soil using Calcium Carbide Waste-Carbonised Lophira Alata Sawdust Composite (CCW-CLAS) as Immobilizing Agent

Soil contamination with heavy metals is a global environmental matter of interest due to its thinkable dangers to humans, environmental health and ecosystem preceding shortfalls in agricultural produce and dangerous health outcomes as they penetrate the food chain. The aim of this study was to mitigate lead and cadmium ions contaminant in soil using calcium carbide waste-carbonized lophira alata sawdust composite (CCW-CLAS). Contaminated soil samples were collected from Evbareke spare parts market, Benin City, Edo state Nigeria, using a grid sampling method at the depth of 0-20cm with the aid of soil auger. 50% W/W of the powdered calcium carbide waste and lophira alata sawdust was placed in a ceramic crucible and put into muffle furnace and heated at 350oC for 3 hours. The X-ray diffraction analysis for the calcium carbide waste-carbonized lophira alata sawdust composite (CCW-CLAS) revealed that it was made up of predominantly calcite fraction (55.0%), portlandite (25.0%), coesite (7.3%), muscovite (6.7%), dolomite (4.0%) and lime (2.1%) this was supported by FTIR analysis. SEM analysis revealed that calcium carbide waste-carbonized lophira alata sawdust composite (CCW-CLAS) possess a rough surface with pore of varied size and irregular shape. The contaminated soil from the Evbareke spare parts market was heavily polluted with petroleum hydrocarbons, and the soil was highly saline with low C.E.C. The soil texture was loamy-sand. As the amount of CCW-CLAS increased in the soil, the amount of cadmium and lead ions that was releasable in the soil reduced, indicating that CCW-CLAS was effective in immobilizing cadmium and lead ions. The optimum amount of the amender in the contaminated soil to immobilize lead ion was 4% w/w and cadmium ion was 2%.

Effect of Composite Composition on Mechanical Properties of Banana Fiber Composites with Epoxy Matrix for Functional Materials

Technological developments and the influence of globalization have an impact on increasing the need for the amount of material for industry. The many disadvantages of metal materials due to their large mass, difficult manufacturing processes, corrosive properties, and high production costs have resulted in reduced use of metal materials in various products. Nowadays, there are many replacement materials with mechanical properties that can resemble metal materials such as composites. The role of composites is very important in the development of today's industrial world. This study wanted to determine the effect of the composite composition of rias banana fiber and teak sawdust with epoxy resin on the mechanical properties of the composite. The results showed that the comparison of the composition of the composite using rias banana fiber and teak sawdust with an epoxy matrix had an effect on the mechanical properties. Increasing the percentage of resin composition increases the value of the surface hardness of the composite. The highest level of Rockwell hardness with a value of 117 HRB in sample D and the lowest 109 HRB in sample A. While the highest max strength value was produced by sample C with a composition of teak sawdust: rias banana fiber: epoxy is 20% : 40% : 40 %. The conclusion of this research is the more resin composition will increase the composite hardness test value.

Study of Composite Bricks from Sawdust and Cement

Abstract: Many timber producing countries generate more than 2 million m3 of sawdust annually. In developing countries, sawdust is often disposed of by open dumping, open burning, or dumping in landfills. The majority of wood sawdust wastes is accumulated from the countries all over the world and causes certain serious environmental problems and health hazards. This poses huge environmental challenges related to air pollution, greenhouse gas emission and destruction of plant and aquatic life. Finding from this experiment that sawdust can be used to make sawdust construction composites with good water absorption and strength characteristics. In this experiment concludes that partially replacing 10%, 20% and 30% of sawdust with sand and cement. Sawdust composites are also attractive for their low thermal conductivity, high sound absorption and good sound insulation characteristics. These findings indicate that increased utilization of sawdust composites in construction will mitigate against potential sawdust environmental pollution, conserve energy and reduce disposal costs. It shows a potential to be used for walls, wooden board substitute, economically alternative to the concrete blocks, ceiling panels, sound barrier panels, etc. Keywords: Sawdust, Sawdust Composites, Thermal Conductivity, Sound Absorption, Sound Insulation etc.

Morphological, mechanical, and physical properties of ground rubber tire thermoplastic elastomer/rubberwood sawdust composites: Effects of composition contents and rubber types

Waste tire disposal is a growing challenge among major cities worldwide because each year, a huge number of end-of-life tires is generated. The current study aimed to evaluate the potential of ground rubber tire (GRT) and waste rubberwood sawdust (RWS) as materials for developing wood-polymer composites (WPCs). The effects of the compositions’ contents and rubber types on the mechanical and physical properties, as well as the morphology of the thermoplastic elastomer (TPE)/RWS composites were investigated. The results revealed that the addition of about 30–60 wt% of RWS improved the modulus of elasticity, compressive modulus, and hardness of the TPE composites based on both the GRT and natural rubber (NR). With the same RWS content and rubber type, the TPE/RWS composites with rubber/plastic blends of a 30/70 ratio clearly yielded better mechanical and physical properties than those blends with a 40/60 ratio. The addition of about 2–4 wt% of maleic anhydride-grafted polypropylene (MAPP) improved all the properties of the TPE/RWS composites. Overall, the composites based on the GRT gave superior strength, rigidity, and dimensional stability than that based on NR. It is therefore suggested that the eco-friendly TPE composites made from GRT and waste rubberwood could be a suitable replacement for the inorganic filler-natural rubber composites for saving costs and the environment.

The Effect of Adding Wood Chips on The Decomposition of Sludge from Seafood Processing Wastewater Treatment System

This study evaluates the effect of various wood chips on the sludge decomposition process. Sludge from Surimi processing wastewater treatment system (AS) of Danifood factory in Danang city was mixed with local wood chips as bulking agents (BA) including Khaya senegalensis (D), Acasia (A) and sawdust (S). The weight ratio of AS/BA added to each aerobic model was 1:1, 1.5:1 and 2:1 for K, A and S, respectively. The results showed that variations of temperature and pH were suitable for aerobic biochemical process. K and S model reached 50 °C in three days and remained stably for next four days, whereas A reached 50 °C after ten days and remained stably for six days. The value of seed germination index from decomposed sludge was more than 80% for K and A whereas 48 - 60 % for S. It is necessary to consider the type or composition of sawdust when utilize it as a BA. In addition, the TOC and T-N of AS after decomposition met Vietnamese standard for organic fertilizer quality, so they could be used to supply nutrients to plants. This study is an important basis for the BAs selection to conduct experiments aim at AS recovery.

Sawdust and soil block as wall in simple buildings to gain the optimum heat and embodied energy in humid tropical area

Red bricks are widely used in Indonesia. The process of making red brick itself causes many problems such as the combustion process and the creation of air pollutant during the production process. On the other hand, waste from timber industry in Indonesia, which is called sawdust, becomes a problem that need to be solved by the woodcraft industry. Therefore, this study aims to substitute the use of red brick as wall material as well as reducing the waste of woodcraft industry by mixing sawdust waste with clay and cement as an alternative. The purpose of this study is investigating the performance of sawdust as wall material in terms of heat transfer and embodied energy in buildings compared to red brick. This study aims to analyse the optimum composition of sawdust as wall material to gain a balanced heat and embodied energy in simple housing. The study investigates sawdust wall in building with the size of 36m2 by using simulation software called Archipak. The embodied energy calculation uses standard embodied energy per unit. The research variable is the thickness of sawdust walls. The result of this study is the thickness of sawdust wall with minimum heat transfer and embodied energy.

Production of Reinforced Polyester Composite from Okra Fibre and Sawdust

This research presents properties of okra and sawdust reinforced polyester composite. The compatibility of the simple woven okra and sawdust with polyester was enhanced with stearic acid treatment. FTIR analysis confirmed decrease in hydrophilicity of the fibre and dust. Six composite samples; pure polyester, sawdust reinforced polyester composite, okra reinforced polyester composite, 10% sawdust in okra fibre reinforced composite, 20% sawdust in okra fibre reinforced composite and 30% sawdust in okra fibre reinforced composites were fabricated and characterized. The morphological analysis showed that the homogeneity of polyester in the samples reduces with increase in sawdust filler (10-30 wt%). Water absorption was highest (1.6%) in 30% sawdust in okra. The densities of all the composites were between 3.5 – 4.5 kg/m3. The sawdust reinforced composite recorded low impact energy of 0.25 J while the woven okra fibre reinforced polyester recorded the highest impact energy of 9.9 J. Hardness property reduced as the biomass content increased. Unreinforced polyester recorded the highest average elongation of 25% (1400 µm) and reduced elongation as filler increased. The storage modulus was highest for unreinforced composite at 40oC but as the temperature reached 81oC the storage modulus of unreinforced polyester dropped lower than the sawdust composite. The damping factor (1.41) was highest for 20 wt% sawdust/okra polyester composite. This research concludes that sawdust and okra are suitable for lightweight and energy damping materials in automobile applications.

Experimental investigation of epoxy matrix and pine sawdust reinforced wood-polymer composite materials

Mechanical, thermal, and water absorption properties of the composites have been studied as a function of sawdust content, using different weight percentage. The characteristics properties of the composites were studied using differential scanning calorimetry and Fourier-transform infrared spectroscopy. Field emission scanning electron microscopy was used to understand the interfacial bonding. The obtained results showed that the 15 wt% composites exhibited the highest tensile strength (7.5 MPa) and flexural strength (8.9 MPa) compared with the 5 wt%, 30 wt%, 40 wt%, and 50 wt% composites. A good interfacial combination was formed between 15 wt% of sawdust and epoxy resin. In terms of the tensile and flexural strength, the differential scanning calorimetry analysis confirmed that matrix modification could improve the mechanical properties and thermal stability of the composites compared to neat resin. The Fourier-transform infrared spectroscopy spectrum showed the presence of functional groups pertaining to composites. The absorption data of the composite showed that the water uptake increased as the amount of sawdust in the composite increased. The 5 wt%, 15 wt%, 30 wt%, and 40 wt% sawdust composites also displayed less water absorption behavior (1.534%, 1.871%, 2.492%, and 4.127%, respectively) compared to the 50 wt% composite.

Compressive Strength Performance of Composite Sand Cement Brick with Power Saw Wood

Malaysia is experiencing an unprecedented growth of its urban centre due to its developing economy and industrialization, causing the demand of bricks production to be high. This increased the price of river sand. Further, the river sand may be depleted in the future if there is no alternative taken in reducing the usage of river sand in building materials due to the limited natural resources supply. Therefore, this research concentrates on using waste material like wood fiber waste (WFW) in order to reduce river sand in the fabrication of composite sand cement brick. This research is done in order to determine the water absorption and the compressive strength of sand cement brick with powder saw wood. Six batches of bricks were made with different composition of sawdust of 0%, 1%, 2%, 3%, 4% and 5% sawdust. All the bricks undergo 7 days of air-cured process before having the water absorption test and compression test. 3 days of water-cured process was performed on all bricks in order to investigate the results of water absorption test. For water absorption test, 0% of sawdust brick shows the lowest value while 5% of sawdust brick shows the highest value of water absorption rate. This indicated that high percentages of sawdust in composite brick will results in higher water absorption rate. This factor is due to the sawdust that is hydrophilic and porous in nature that causes the brick to containe more air space in the brick. Thus, this can be evidenced by the density data that keep decreasing with increasing percentages of sawdust. As for compressive strength test, the results presented 0%, 1%, 2%, 3%, 4% and 5% of sawdust have strength of 20.61 MPa, 25.30 MPa, 15.47 MPa, 2.03 MPa, 1.49 MPa and 1.73 MPa respectively. In summary, it can be concluded that optimum percentage of sawdust is 2% as it contains better compressive strength than other bricks although it has slightly higher water absorption rate than conventional sand cement brick. The compressive strength was influenced by the density of brick. It is shown in density results that decreasing in density will causes declining in compressive strength. As a conclusion, water absorption rate increases linearly proportional to the percentages of sawdust but inversely proportional to the compressive strength and the density of the brick.

On the basic chemical composition of selected biomass types from four regions of Mexico, for bioenergetic purposes

The chemical composition of hardwoods sawdust and citrus residues from four states of the Mexican Republic (Quintana Roo, Durango, Veracruz, and Sonora) were determined. The results ranged as follows: total extractives from 8.2% (Quercus spp.) to 35.0% (lime leaves), holocellulose from 45.4% (lime leaves) to 70.6% (Lysiloma latisiliquum), lignin from 3.9% (lemon peels) at 25.4% (Caesalpinia platyloba), ash from 0.4% (orange branches) to 6.3% (lemon peels), pH from 5.1 (Swartzia cubensis) to 7.3 (orange branches), and calorific value of 19.8 MJ/kg (Lysiloma latisiliquum and Quercus spp.) to 21.7 MJ/kg (Olneya tesota). With the exception of the oak samples, in all the biomass samples the extractives content is relatively high (10.1% for Lysiloma latisiliquum to 35% for Persian lime leaves), and could represent a potential for future study and applications in the field of antioxidants. Due to the chemical properties and calorific value, the biomass samples studied present potential for local use as densified biofuels (pellets or briquettes).