Composition Of Corrosion Layers Research Articles

Composition of corrosion layers on a magnesium rare‐earth alloy in simulated body fluids

In this study, the composition of corrosion product layers on a magnesium rare-earth alloy in simulated body fluid (m-SBF) containing albumin in physiological concentration is examined. The time dependence of the composition of the layer is studied. The ions from the body fluid that participate in the corrosion layer formation were identified by analyzing layers formed in different solutions that contain only some of the ions of SBF. The layer composition was analyzed by different complementary methods. We used energy dispersive X-ray analysis, grazing incidence X-ray diffraction, and Fourier transform infrared spectroscopy. The morphology of the corrosion layers was studied using scanning electron microscopy and light microscopy. In m-SBF with and without albumin we found an amorphous layer of carbonated calcium phosphate with some calcium replaced by magnesium. It can be clearly shown that calcium is only deposited in the corrosion layer if phosphates are in the solution. The cross-sections reveal that there are some sharp crevices in the substrate. The work systematically explores the nature of surface layers on magnesium rare-earth alloys formed in complex SBFs, with the aim to elucidate the influence of specific electrolyte components on the morphology, structure, and composition of corrosion layers on Mg alloys.

The Incorporation of Laser Ablation for Sampling into a Proton X-ray Emission System

ABSTRACTThe variation with depth of the composition of corrosion layers on buried metal objects can provide the archaeologist with valuable information relating to the burial conditions of the object. In some cases these layers can be very thick and so, normally destructive methods such as sampling are used to characterise the metal and corrosion layers when possible. We have developed a system for the use of a microfocused high power pulsed Nd:YAG laser to ablate the corrosion layer in a series of controlled steps while monitoring the composition of the exposed surface using focused PIXE and RBS in the external beam facility of the Oxford Scanning Proton Microprobe. With proper manipulation of the data we are able to calculate the values for trace elements at various depths in the corrosion layer. It is hoped that this system will lead to a better understanding of corrosion properties.

Corrosion products on steel 20 in aerated hydrazine solutions: Mössbauer study

Composition of corrosion layers on steel 20 in aerated solutions with hydrazine concentrations less than 11 ppm was studied at 50, 60, and 80°C in dynamic conditions by transmission Mossbauer spectroscopy and X-ray diffraction as supplementary technique. Corrosion rates were determined by gravimetric method. A comparison with corrosion in water at 80°C was made. The observed layers have not any protective character. For 0.1 m/s linear velocity, they are composed by nonstoichiometric magnetite, (Fe3−xO4,x=0.02–0.04) with lepidocrocite (γ-FeOOH) as secondary phase at 50°C. Haematite (α-Fe2O3) is observed at 60 and 80°C with a 19 nm particle size. It becomes smaller for higher velocity (0.7 m/s).