Community Composition Of Biofilms Research Articles

Biofilms on RO membranes treating tap water harbour diverse bacteria with opposing salinity optima

The escalating scarcity of clean freshwater, a crucial global economic asset, demands advancements in water purification technologies. Reverse osmosis (RO) stands out as an effective method for removing contaminants, yet biofouling of RO membranes poses a significant challenge, lowering the operational and energy efficiency. Through DNA sequencing, we identified a small set of abundant core bacterial species common to the three RO modules. The core species are closely related to heterotrophic taxa from soil and groundwater systems and are likely important for the RO membrane biofouling. The community compositions of the RO-biofilms were system-specific. Within a given RO module, the biofilm community composition was uniform across the various sections of the membrane unit. We established a method to efficiently extract live cells from the membranes and determined their salinity tolerance. Growth was mainly aerobic and was only inhibited at salinities above 3 to 5 %, i.e. exceeding those that can be reached in the specific RO modules. The species composition of the growing community changed discretely with the salinity level, indicating that salinity fluctuations may have an important role in shaping RO biofilm communities. Our findings highlight a complex interplay between microbial communities, salinity, and growth conditions in RO modules.

Biofilm formation dynamics in long-distance water conveyance pipelines: Impacts of nutrient levels and metal stress

Biofilm formation in long-distance water conveyance pipelines poses significant risks to water quality, particularly under varying nutrient levels and heavy metal stress. However, the impacts of pipeline material on biofilm formation dynamics under different raw water conditions remain elusive. This study investigated the effects of nutrient availability and Fe-Mn stress on biofilm development, structural stability, bacterial community composition, and the occurrence of viable but non-culturable (VBNC) bacteria. Using reactors with different nutrient conditions, we observed that increased nutrient levels promote biofilm growth but lead to greater instability, heightening the risk of secondary contamination. Notably, nutrient escalation beyond a critical threshold had a diminishing impact on biofilm community composition. Additionally, Fe-Mn stress, while initially enhancing microbial adhesion and metabolic activity, ultimately inhibited biofilm formation over time and increases the prevalence of VBNC bacteria, particularly on stainless steel (SS) surfaces. Our findings also highlighted the importance of material selection for pipelines, with polyvinyl chloride (PVC) showing reduced biofilm formation compared to SS, making it a more suitable option for transporting raw water in environments with high metal content. Dispersal limitation determined the bacterial community assembly during the biofilm formation, accounting for 64.53–90.67 % of the variability in different scenarios. These insights offer valuable guidance for managing biofilm-related issues in water distribution systems, emphasizing the need for careful control of nutrient levels and material choice to ensure water safety over long distances.

The effect of inoculum source of different pollution levels on the performances of microbial fuel cell biosensors

Selection of inoculum sources is a key factor in constructing microbial fuel cells (MFCs), and the property of inoculum sources is greatly affected by the degree of environmental pollution. However, limited attention has been paid to how these differences affect the response of MFC biosensors. Here the effects of inoculum sources with varying pollution levels on the performances of constructed MFCs were evaluated, and the microbial communities were analyzed before and after inoculation. The results showed significant differences in the detection of biochemical oxygen demand (BOD) and toxicity (Cu2+) among the five groups of MFC biosensors. Combined with the data of the microbial community, the results indicated that the increase rate of the initial start-up voltage is related to the abundance of original electroactive bacteria (EAB) in the inoculum source. The higher the abundance of EAB, the faster increase rate in the initial start-up voltage and the shorter start-up time. The difference in the detection range of the BOD should be related to the ability of the microbial communities to withstand the organic shock loads. The microbial community's tolerance to Cu2+ was affected by the original water quality of the inoculum source. The high metal ion content leads to low sensitivity of MFC biosensor to Cu2+ ion. Enterobacteriaceae were abundant in all the five groups of MFCs, indicating that the dominant bacteria can be enriched in MFC anode biofilms with the inoculum sources of different pollution levels. The microbial community compositions of the anode biofilms were affected by the inoculum sources of different pollution levels, which in turn resulted in the differences in MFCs performances.

Contribution of groundwater-borne nutrients to eutrophication potential and the share of benthic algae in a large lowland river

Groundwater inflow can be a significant source of nutrients for riverine ecosystems, which can affect eutrophication i.e., the elevated primary production and the corresponding accumulation of algal biomass. Experimental and modelling work has shown that benthic algae (autotrophic biofilms) in particular benefit, as they have direct access to the inflowing groundwater-borne nutrients. Primarily the supply of phosphorus (P) enhances pelagic algal biomass, as it is the limiting nutrient for primary production in most freshwater systems. In this study, we estimate the effect of groundwater inflow on overall eutrophication of a large, European lowland river and tested its seasonal effect on biofilms in particular. We calculated the effects on overall eutrophication during summer according to the estimated input of groundwater-borne P and the C:P stoichiometry of planktonic algae in the Elbe River. Our model indicated that these diffuse P inputs have the potential to significantly increase eutrophication. Groundwater-P can contribute up to 1.5 t/d PO4 over the investigated 450 km stretch of the Elbe River under low flow conditions. This would result in an additional planktonic load of about 46 t/d of particulate organic carbon, thereby contributing to eutrophication at the regional scale in this river. In contrast, at the local scale, biofilms were collected seasonally from artificial substrata exposed in the river either in hydrogeologically active areas with groundwater inflow, or in areas of varying hydraulic connectivity. Analyses of biofilm macronutrients, structural components and biofilm community composition show distinct effects of season, hydrogeology and groundwater inflow. The dominant predictors were season and the interaction between hydrogeology and groundwater. Benthic eutrophication is most likely to occur in autumn in areas of loose rock with high groundwater inflow. The strong interaction of environmental factors in determining benthic eutrophication highlights the need to assess these factors in combination rather than in isolation.

Seasonal changes in soil biofilm microbial communities

Biofilm and planktonic prokaryotic communities were studied using a glass fibre filter as trapping material immersed in field soil at different times of the year (January, April, July, September) and incubated there for different periods (3, 6, 9, 12 months). The composition of biofilm and planktonic communities fluctuated over time, likely shaped by succession processes and varying environmental factors. This highlights soil biofilms as dynamic structures whose microbial community differs from that of soil plankton. Additionally, quantification of the biofilm-to-plankton 16S rRNA gene copy number ratio indicated that soil prokaryotes occur mainly as biofilm components.

Nascently generated microplastics in freshwater stream are colonized by bacterial communities from stream and riparian sources.

The purpose of this study was to examine bacterial colonization of different types of microplastics through time in a freshwater ecosystem. Microplastics are persistent pollutants in aquatic ecosystems. Bacteria readily colonize microplastic surfaces and may contribute to their degradation, but the taxa involved, and their degradative abilities, differ based on factors such as microplastic chemistry, plastic age, and specific ecosystem types. Four different common types of newly manufactured microplastics, high-density polyethylene, low-density polyethylene, polypropylene, and polystyrene, were incubated for 7 weeks in a freshwater stream and sampled. Sample collection was timed to examine the development of early and late bacterial biofilm communities. Microplastics were analyzed for changes to buoyancy, weight, contact angles (an indicator of surface roughness), bacterial community composition, and the number of bacterial cells. Time was the only significant contributing factor in the development of bacterial biofilm communities on microplastic disks over the 7-week study. Notably, the Comamonadaceae were abundant early in the study and decreased in abundance with time, while the Methylococcaceae demonstrated the opposite trend. Different physicochemical properties among the various types of microplastics had only a minor effect on bacterial community compositions of biofilms growing on the microplastics. Additionally, the surfaces of all microplastic disks became rougher over time in the stream. Collectively, our results show that microplastic surfaces undergo surface modification and community succession as time progresses, regardless of microplastic type, in a freshwater stream ecosystem.

Microbiomes on microplastics versus natural microcarriers: Stability and transformation during aquatic travel from aquaculture ponds to adjacent stream

Microplastics (MPs) with different physical-chemical properties are considered as vectors for the propagation of microbes in aquatic environments. It remains unclear how plastic types impact on the plastisphere and whether different MPs spread microbes more rapidly than natural materials in microbes across distinct water bodies as proposed previously. We used in-situ incubation to investigate the microbes attached on MPs of polyethylene (PE), polypropylene (PP), and polyvinyl chloride (PVC), versus that on two natural microcarriers (quartz sands and bamboo) during the travel from aquaculture ponds with impacted by fish farming to adjacent freshwater stream. The results showed that the microbial communities on the carriers were shaped not only by environmental conditions, which were primary determinants but also by carrier types. All the tested plastics did not carry more microbes than the natural carriers during the journey. The biofilm community composition on PVC is distinct from that on PE and PP MPs and natural carriers. The plastisphere of PE and PP kept microbial proportions as natural materials did but PVC retained less than nature materials. Bamboo carried more potential pathogens than plastic polymers and quartz. The results indicated that the communities of plastisphere is polymer-type dependent, and, compared with the natural materials, MPs did not show enhanced propagation of microbes, including pathogens, cross distinct environments.

Biofilms on plastic litter in an urban river: Community composition and activity vary by substrate type.

In aquatic ecosystems, plastic litter is a substrate for biofilms. Biofilms on plastic and natural surfaces share similar composition and activity, with some differences due to factors such as porosity. In freshwaters, most studies have examined biofilms on benthic substrates, while little research has compared the activity and composition of biofilms on buoyant plastic and natural surfaces. Additionally, the influence of substrate size and successional stage on biofilm composition has not been commonly assessed. We incubated three plastics of distinct textures that are buoyant in rivers, low-density polyethylene (rigid; 1.7 mm thick), low-density polyethylene film (flexible; 0.0254 mm thick), and foamed polystyrene (brittle; 6.5 mm thick), as well as wood substrates (untreated oak veneer; 0.6 mm thick) in the Chicago River. Each material was incubated at three sizes (1, 7.5, and 15 cm2 ). Substrates were incubated at 2-10 cm depths and removed weekly for 6 weeks. On each substrate we measured chlorophyll concentration, biofilm biomass, respiration, and flux of nitrogen gas. We sequenced 16S and 23S rRNA genes at Weeks 1, 3, and 6 to capture biofilm community composition across successional stages. Chlorophyll, biomass, and N2 flux were similar across substrates, but respiration was greater on wood than plastics. Bacterial and algal richness and diversity were highest on foam and wood compared to polyethylene substrates. Bacterial biofilm community composition was distinct between wood and plastic substrates, while the algal community was distinct on wood and foam, which were different from each other and polyethylene substrates. These results indicate that polymer properties influence biofilm alpha and beta diversity, which may affect transport and distribution of plastic pollution and associated microbes, as well as biogeochemical processes in urban rivers. This study provides valuable insights into the effects of substrate on biofilm characteristics, and the ecological impacts of plastic pollution on urban rivers. PRACTITIONER POINTS: Plastic physical and chemical properties act as forces of selection for biofilm. Biofilm activity was similar among three different types of plastic. Community composition between plastic and wood was different.

Disturbance frequency directs microbial community succession in marine biofilms exposed to shear.

Disturbances are major drivers of community succession in many microbial systems; however, relatively little is known about marine biofilm community succession, especially under antifouling disturbance. Antifouling technologies exert strong local disturbances on marine biofilms, and resulting biomass losses can be accompanied by shifts in biofilm community composition and succession. We address this gap in knowledge by bridging microbial ecology with antifouling technology development. We show that disturbance by shear can strongly alter marine biofilm community succession, acting as a selective filter influenced by frequency of exposure. Examining marine biofilm succession patterns with and without shear revealed stable associations between key prokaryotic and eukaryotic taxa, highlighting the importance of cross-domain assessment in future marine biofilm research. Describing how compounded top-down and bottom-up disturbances shape the succession of marine biofilms is valuable for understanding the assembly and stability of these complex microbial communities and predicting species invasiveness.

Microaerobic methane-driven denitrification in a biotrickle bed – Investigating the active microbial biofilm community composition using RNA-stable isotope probing

A microaerobic (2% O2 v/v) biotrickle bed reactor supplied continuously with 2% methane to drive nitrate removal (MAME-D) was investigated using 16S rDNA and rRNA amplicon sequencing in combination with RNA-stable isotope probing (RNA-SIP) to identify the active microorganisms. Methane removal rates varied from 500 to 1000 mmol m−3h−1 and nitrate removal rates from 25 to 58 mmol m−3h−1 over 55 days of operation. Biofilm samples from the column were incubated in serum bottles supplemented with 13CH4. 16S rDNA analysis indicated a simple community structure in which four taxa accounted for 45% of the total relative abundance (RA). Dominant genera included the methanotroph Methylosinus and known denitrifiers Nubsella and Pseudoxanthomonas; along with a probable denitrifier assigned to the order Obscuribacterales. The 16S rRNA results revealed the methanotrophs Methylocystis (15% RA) and Methylosinus (10% RA) and the denitrifiers Arenimonas (10% RA) and Pseudoxanthomonas (7% RA) were the most active genera. Obscuribacterales was the most active taxa in the community at 22% RA. Activity was confirmed by the Δ buoyant density changes with time for the taxa, indicating most of the community activity was associated with methane oxidation and subsequent consumption of methanotrophic metabolic intermediates by the denitrifiers. This is the first report of RNA stable isotope probing within a microaerobic methane driven denitrification system and the active community was markedly different from the full community identified via 16S-rDNA analysis.

Linking differences in microbial network structure with changes in coral larval settlement

Coral cover and recruitment have decreased on reefs worldwide due to climate change-related disturbances. Achieving reliable coral larval settlement under aquaculture conditions is critical for reef restoration programmes; however, this can be challenging due to the lack of reliable and universal larval settlement cues. To investigate the role of microorganisms in coral larval settlement, we undertook a settlement choice experiment with larvae of the coral Acropora tenuis and microbial biofilms grown for different periods on the reef and in aquaria. Biofilm community composition across conditioning types and time was profiled using 16S and 18S rRNA gene sequencing. Co-occurrence networks revealed that strong larval settlement correlated with diverse biofilm communities, with specific nodes in the network facilitating connections between modules comprised of low- vs high-settlement communities. Taxa associated with high-settlement communities were identified as Myxoccales sp., Granulosicoccus sp., Alcanivoraceae sp., unassigned JTB23 sp. (Gammaproteobacteria), and Pseudovibrio denitrificans. Meanwhile, taxa closely related to Reichenbachiella agariperforans, Pleurocapsa sp., Alcanivorax sp., Sneathiella limmimaris, as well as several diatom and brown algae were associated with low settlement. Our results characterise high-settlement biofilm communities and identify transitionary taxa that may develop settlement-inducing biofilms to improve coral larval settlement in aquaculture.

Effect of anode material and dispersal limitation on the performance and biofilm community in microbial electrolysis cells

In a microbial electrolysis cell (MEC), the oxidization of organic compounds is facilitated by an electrogenic biofilm on the anode surface. The biofilm community composition determines the function of the system. Both deterministic and stochastic factors affect the community, but the relative importance of different factors is poorly understood. Anode material is a deterministic factor as materials with different properties may select for different microorganisms. Ecological drift is a stochastic factor, which is amplified by dispersal limitation between communities. Here, we compared the effects of three anode materials (graphene, carbon cloth, and nickel) with the effect of dispersal limitation on the function and biofilm community assembly. Twelve MECs were operated for 56 days in four hydraulically connected loops and shotgun metagenomic sequencing was used to analyse the microbial community composition on the anode surfaces at the end of the experiment. The anode material was the most important factor affecting the performance of the MECs, explaining 54–80 % of the variance observed in peak current density, total electric charge generation, and start-up lag time, while dispersal limitation explained 10–16 % of the variance. Carbon cloth anodes had the highest current generation and shortest lag time. However, dispersal limitation was the most important factor affecting microbial community structure, explaining 61–98 % of the variance in community diversity, evenness, and the relative abundance of the most abundant taxa, while anode material explained 0–20 % of the variance. The biofilms contained nine Desulfobacterota metagenome-assembled genomes (MAGs), which made up 64–89 % of the communities and were likely responsible for electricity generation in the MECs. Different MAGs dominated in different MECs. Particularly two different genotypes related to Geobacter benzoatilyticus competed for dominance on the anodes and reached relative abundances up to 83 %. The winning genotype was the same in all MECs that were hydraulically connected irrespective of anode material used.

Can you see the algae for the slime? Temporal patterns of biofilm food quality and quantity in lowland rivers

AbstractAnimals must invest some portion of their metabolism to activities related to physiological maintenance and the remainder to processes related to the production of new biomass for growth and reproduction. Animal metabolism is fuelled by food, and the quality and quantity of food, along with the effort invested to obtain it, are fundamental to supporting populations. Biofilms are a primary basal food resource within riverine food webs, and it is thought that their nutritional value for animals decreases with age due to dynamic changes in community composition. We sought to test assumptions of spatiotemporal changes to biofilm nutritional value by assessing variations in biofilm mass and fatty acid composition in three rivers for 73 days. We also used a multi‐prong eDNA approach to characterize changes to biofilm fungal (ITS1–4), bacterial (16S), and algal (23S) community compositions. We anticipated biofilm food value to decrease with biofilm age due to shifts in composition from high‐quality green algae and diatoms to low‐quality cyanobacteria and filamentous algae. Our results partially support this contention; biofilm food value, assessed as a combination of fatty acid mass per unit area (in grams per square meter) and concentration of fatty acids (in milligrams per gram), was dynamic and peaked between 24 and 43 days following submersion. After 43 days, biofilm food value decreased. However, despite significant temporal changes in biofilm community composition and a decrease in overall lipid concentration, the proportions of different fatty acid classes among total lipids did not vary. Instead, the observed increase in the abundance of cyanobacteria and filamentous algae compared with diatoms and green algae, along with higher quantities of lipid‐poor extracellular polymeric substances (EPS), likely contributed to the reduction in overall lipid concentration relative to the biofilm dry mass. Here we present a novel approach to balance consumer energetic costs with food quality within aquatic food webs. Our results have important implications for river management and provide valuable information for the use of environmental water to support lotic ecosystems.

Biofilm community composition is changing in remote mountain lakes with a relative increase in potentially toxigenic algae

Mountain lakes provide clear drinking water to humankind but are strongly impacted by global change. Benthic biofilms are crucial for maintaining water quality in these oligotrophic lakes, yet little is known about the effects of global change on mountain biofilm communities. By combining analyses of metabarcoding data on 16S and 18S rRNA genes with climatic and environmental data, we investigated global change effects on the composition of biofilm prokaryotic and micro-eukaryotic assemblages in a five-year monitoring program of 26 Pyrenean lakes (2016–2020). Using time-decay relationships and within-lake dissimilarity modelling, we show that the composition of both prokaryotic and micro-eukaryotic biofilm communities significantly shifted and their biodiversity declined from 2016 to 2020. In particular, analyses of temporal trends with linear mixed models indicated an increase in the richness and relative abundance of cyanobacteria, including potentially toxigenic cyanobacteria, and a concomitant decrease in diatom richness and relative abundance. While these compositional shifts may be due to several drivers of global change acting simultaneously on mountain lake biota, water pH and hardness were, from our data, the main environmental variables associated with changes for both prokaryotic and micro-eukaryotic assemblages. Water pH and hardness increased in our lakes over the study period, and are known to increase in Pyrenean lakes due to the intensification of rock weathering as a result of climate change. Given predicted climate trends and if water pH and hardness do cause some changes in benthic biofilms, those changes might be further exacerbated in the future. Such biofilm compositional shifts may induce cascading effects in mountain food webs, threatening the resilience of the entire lake ecosystem. The rise in potentially toxigenic cyanobacteria also increases intoxication risks for humans, pets, wild animals, and livestock that use mountain lakes. Therefore, our study has implications for water quality, ecosystem health, public health, as well as local economies (pastoralism, tourism), and highlights the possible impacts of global change on mountain lakes.

Fluid flow structures gut microbiota biofilm communities by distributing public goods.

Bacterial gut commensals experience a biologically and physically complex mucosal environment. While many chemical factors mediate the composition and structure of these microbial communities, less is known about the role of mechanics. Here, we demonstrate that fluid flow impacts the spatial organization and composition of gut biofilm communities by shaping how different species interact metabolically. We first demonstrate that a model community composed of Bacteroides thetaiotaomicron (Bt) and Bacteroides fragilis (Bf), two representative human commensals, can form robust biofilms in flow. We identified dextran as a polysaccharide readily metabolized by Bt but not Bf, but whose fermentation generates a public good enabling Bf growth. By combining simulations with experiments, we demonstrate that in flow, Bt biofilms share dextran metabolic by-products, promoting Bf biofilm formation. By transporting this public good, flow structures the spatial organization of the community, positioning the Bf population downstream from Bt. We show that sufficiently strong flows abolish Bf biofilm formation by limiting the effective public good concentration at the surface. Physical factors such as flow may therefore contribute to the composition of intestinal microbial communities, potentially impacting host health.

Microbial Diversity and Activity of Biofilms from Geothermal Springs in Croatia

Hot spring biofilms are stable, highly complex microbial structures. They form at dynamic redox and light gradients and are composed of microorganisms adapted to the extreme temperatures and fluctuating geochemical conditions of geothermal environments. In Croatia, a large number of poorly investigated geothermal springs host biofilm communities. Here, we investigated the microbial community composition of biofilms collected over several seasons at 12 geothermal springs and wells. We found biofilm microbial communities to be temporally stable and highly dominated by Cyanobacteria in all but one high-temperature sampling site (Bizovac well). Of the physiochemical parameters recorded, temperature had the strongest influence on biofilm microbial community composition. Besides Cyanobacteria, the biofilms were mainly inhabited by Chloroflexota, Gammaproteobacteria, and Bacteroidota. In a series of incubations with Cyanobacteria-dominated biofilms from Tuhelj spring and Chloroflexota- and Pseudomonadota-dominated biofilms from Bizovac well, we stimulated either chemoorganotrophic or chemolithotrophic community members, to determine the fraction of microorganisms dependent on organic carbon (in situ predominantly produced via photosynthesis) versus energy derived from geochemical redox gradients (here simulated by addition of thiosulfate). We found surprisingly similar levels of activity in response to all substrates in these two distinct biofilm communities, and observed microbial community composition and hot spring geochemistry to be poor predictors of microbial activity in the study systems.

Early succession of biofilm bacterial communities in newly built drinking water pipelines via multi-area analysis

Biofilms inhabiting pipeline walls are critical to drinking water quality and safety. With massive pipeline replacement underway, however, biofilm formation process in newly built pipes and its effects on water quality are unclear. Moreover, differences and connections between biofilms in newly built and old pipes are unknown. In this study, early succession (≤ 120days) of biofilm bacterial communities (abundance and diversity) in upper, middle and bottom areas of a newly built cement-lined ductile iron pipeline were evaluated using improved Propella™ biofilm reactor and multi-area analysis. A comparison with old pipelines (grey cast iron, 10years) was performed. In the newly built pipeline, the abundance of biofilm bacteria did not change significantly between 40 and 80days, but increased significantly between 80 and 120days. The biofilm bacterial abundance (per unit area) in the bottom area was always higher than that in the upper and middle areas. Based on alpha diversity index and PCoA results, biofilm bacterial community richness, diversity and composition did not change significantly during the 120-day operation. Besides, biofilm shedding from the walls of newly built pipeline significantly increased bacterial abundance in the outlet water. Opportunistic pathogen-containing genera, such as Burkholderia, Acinetobacter and Legionella, were identified in both water and biofilm samples from newly built pipelines. The comparison between new and old pipelines suggested a higher bacterial abundance per unit area at the middle and bottom areas in old pipelines. Moreover, the bacterial community composition of biofilms in old pipelines was similar to that of newly built pipelines. These results contribute to accurate prediction and management of biofilm microbial communities in drinking water pipelines, ensuring the biosafety of drinking water. KEY POINTS: • Biofilm bacterial communities in different areas of pipe wall were revealed. • The abundance of biofilm bacteria increased significantly between 80 and 120days. • Biofilm bacterial community compositions of newly built and old pipes were similar.

Ocean acidification alters the benthic biofilm communities in intertidal soft sediments

Microphytobenthos (MPB) and bacterial biofilms play crucial roles in primary and secondary production, nutrient cycling and invertebrate settlement in coastal ecosystems, yet little is known of the effects of ocean acidification (OA) on these communities in intertidal soft sediments. To fill in this gap, a 28-day CO2 enhancement experiment was conducted for the benthic biofilms in soft intertidal sediments (muds and sands) from Qingdao, China. This experiment included three CO2 treatments: 400 ppm CO2 (control), 700 ppm CO2 and 1000 ppm CO2 (IPCC predicted value in 2100), which were established in a three-level CO2 incubator that can adjust the CO2 concentration in the overlying air. The effects of OA on benthic biofilms were assessed in the following three aspects: MPB biomass, biofilm community structure and microbial biogeochemical cycling (e.g., C-cycle, N-cycle and S-cycle). This study found that the 700 ppm CO2 treatment did not significantly affect the benthic biofilms in intertidal soft sediments, but the 1000 ppm CO2 treatment significantly altered the biofilm community composition and potentially their role in microbial biogeochemical cyc\ling in sediments (especially in sandy sediments). For the bacterial community in biofilms, the 1000 ppm CO2 enhancement increased the relative abundance of Alteromonadales and Bacillales but decreased the relative abundance of Rhodobacterales and Flavobacteriales. For microbial biogeochemical cycling, the 1000 ppm CO2 treatment enhanced the potential of chemoheterotrophic activity, nitrate reduction and sulfur respiration in sediments, likely resulting in a more stressful environment (hypoxic and enriched H2S) for most benthic organisms. Even though incubations in this study were only 28 days long and thus couldn’t fully accommodate the range of longer-term adaptions, it still suggests that benthic biofilms in intertidal sandy sediments are likely to change significantly near the end of the century if anthropogenic CO2 emissions unmitigated, with profound implications on local ecosystems and biogeochemical cycling.

Ecosystem responses of shallow thermokarst lakes to climate-driven hydrological change: Insights from long-term monitoring of periphytic diatom community composition at Old Crow Flats (Yukon, Canada).

Shallow waterbodies are abundant in Arctic and subarctic landscapes where they provide productive wildlife habitat and hold cultural and socioeconomic importance for Indigenous communities. Their vulnerability to climate-driven hydrological and limnological changes enhances a need for long-term monitoring data capable of tracking aquatic ecosystem responses. Here, we evaluate biological and inferred physicochemical responses associated with a rise in rainfall-generated runoff and increasingly positive lake water balances in Old Crow Flats (OCF), a 5600 km2 thermokarst landscape in northern Yukon. This is achieved by analyzing periphytic diatom community composition in biofilms accrued on artificial-substrate samplers at 14 lakes collected mostly annually during 2008-2019 CE. Results reveal that diatom communities at 10 of the 14 lakes converged toward a composition typical of lakes with rainfall-dominated input waters. These include six of nine lakes that were not initially dominated by rainfall input. The shifts in diatom community composition infer rise of lake-water pH and ionic content, and they reveal that northern shallow lake ecosystems are responsive to climate-driven increases in rainfall. Based on data generated during the 12 -year-long monitoring period, we conclude that lakes located centrally within OCF are most vulnerable to rapid climate-driven hydroecological change due to flat terrain, larger lake surface area, and sparse terrestrial vegetation, which provide less resistance to lake expansion, shoreline erosion, and sudden drainage. This information assists the local Indigenous community and natural resource stewardship agencies to anticipate changes to traditional food sources and inform adaptation options.

Effects of combining flow intermittency and exposure to emerging contaminants on the composition and metabolic response of streambed biofilm bacterial communities

Freshwater ecosystems are characterised by the co-occurrence of stressors that simultaneously affect the biota. Among these, flow intermittency and chemical pollution severely impair the diversity and functioning of streambed bacterial communities. Using an artificial streams mesocosm facility, this study examined how desiccation and pollution caused by emerging contaminants affect the composition of stream biofilm bacterial communities, their metabolic profiles, and interactions with their environment. Through an integrative analysis of the composition of biofilm communities, characterization of their metabolome and composition of the dissolved organic matter, we found strong genotype-to-phenotype interconnections. The strongest correlation was found between the composition and metabolism of the bacterial community, both of which were influenced by incubation time and desiccation. Unexpectedly, no effect of the emerging contaminants was observed, which was due to the low concentration of the emerging contaminants and the dominant impact of desiccation. However, biofilm bacterial communities modified the chemical composition of their environment under the effect of pollution. Considering the tentatively identified classes of metabolites, we hypothesised that the biofilm response to desiccation was mainly intracellular while the response to chemical pollution was extracellular. The present study demonstrates that metabolite and dissolved organic matter profiling may be effectively integrated with compositional analysis of stream biofilm communities to yield a more complete picture of changes in response to stressors.