Void Volume Of Column Research Articles

Non-destructive chromatographic determination of surface area in reverse phase chromatographic columns

One of the critical but underutilized parameters that affect chromatographic separation is an adsorbent surface area (S.A.). We introduce a concept of direct determination of the total surface area of chromatographic columns by utilizing a nondestructive measurement of eluent component excess adsorption isotherm measurement and the application of the Standard Excess Adsorption Isotherm from acetonitrile-water and methanol-water binary mixtures for direct determination of the S.A. in chromatographic columns. This nondestructive technique was used to determine the surface area of five commercial columns, including three core-shell particle type columns (Kinetex-C18, Ascentis C18, and Hallo C18) and in-housemade C18 columns. The traditional low-temperature nitrogen adsorption (LTNA) technique was compared to the novel chromatographic method of nondestructive surface area determination for adsorbents modified with octadecylsilanes. The chromatographically determined surface area was in good agreement with the conventional techniques for all columns used. The difference between the three techniques is less than 10%. Columns were characterized in terms of adsorbent geometry (e.g., pore volume, column void volume, interparticle volume), ligands bonding density, and the amount of the packing material in a chromatographic column.

Facile synthesis and eco-friendly analytical methods for concurrent estimation of selected pharmaceutical drugs in their solutions: application to quality by design, lean six sigma, and stability studies

Economical, highly robust, selective, precise, and eco-friendly RP-UPLC and spectrophotometric methods were developed and validated for the concurrent estimation of selected pharmaceutical drugs represented in ceftazidime (CFZ) and pyridine (PYD) in their solutions using Agilent Zorbax SB-C18 RRHD (50 × 2.1 mm, 1.8 μm) column at flow rate 0.3 mL/min with wavelength 254 nm. Box-Behnken design (BBD) established Response surface methodology (RSM) to achieve the optimum chromatographic condition with minimal trials conducted. Three independent variables specifically acetonitrile ratio 60–70%, pH 3–7, and temperature 25–35 °C were implemented to evaluate the influences of these variables on the responses as resolution and retention time. Desirability and overlay plots were carried out to adjust the optimal condition that achieved the shortest retention time of less than 2 min and desired resolution of more than 1.5 using a mobile phase consisting of acetonitrile: purified water (70:30, v/v) at pH 5.0 adjusted by 0.1% orthophosphoric acid with the column oven temperature 30 °C and column void volume 0.46 mL. Mean centering of ratio spectra (MCR) and ratio subtraction (RS) methods were effectively applied to resolve drugs' spectral superposition at 220 nm, 255.4 nm, 260.3 nm, and 254.6 nm for CFZ and PYD, respectively. Linearity range was accomplished for UPLC, MCR, and RS methods over the concentration range of 2–100, 1–50,3–30 and 5–30 µg/mL for CFZ and PYD, respectively with correlation coefficient > 0.999 and good recovery results within 98–102%. Six Sigma methodology was achieved using the process capability index (Cpk) to compare the suggested and USP methods showing that both are highly capable with Cpk > 1.33. The proposed method was successfully validated depending on ICH guidelines and ANOVA results and applied for the accelerated stability study.Graphical

Towards an accurate method for column void volume determination using liquid chromatography-mass spectrometry

Prediction of analyte retention times requires prior knowledge of the column void volume, the measurement of which is still highly contested within the literature and therefore experimental based prediction is often used. In this study, we investigated deuterated acetonitrile as an isotopically labelled mobile phase component to observe its elution behaviour in a binary mixture with water at 25 different mobile phase compositions (from 5 to 95 vol.% of acetonitrile), on two stationary phases (C8 and C18), and at two temperatures (30 and 40 °C) using LC-MS. The same experimental design was additionally used for three commonly used neutral void volume markers: uracil, phloroglucinol and N,N-dimethylformamide. Temperature was observed to influence the elution of acetonitrile in an inversely proportional manner with higher temperatures coinciding with lower elution times. By utilizing a three-way ANOVA, the composition of the mobile phase has been shown to have a significant effect on deuterated acetonitrile and other investigated void volume markers, demonstrating the fact that both void volume markers and acetonitrile itself exhibit retention-like behaviour. Excess adsorption isotherms for acetonitrile were calculated using deuterated acetonitrile elution data. The comparison of void volumes, obtained with conventional neutral void volume markers, revealed the former to be 24–36% lower than the void volume obtained using deuterated acetonitrile, as an isotopically labelled mobile phase component. For a water:acetonitrile mobile phase, the minor disturbance method using deuterated acetonitrile to obtain an integral average void volume (2.08 and 2.05 mL for C18 at 30 and 40 °C, respectively and 2.16 and 2.13 mL for C8 at 30 and 40 °C, respectively) was found to be the most appropriate method for determining the elusive column void volume.

Stability-Indicating New RP-UPLC Method for Simultaneous Determination of a Quaternary Mixture of Paracetamol, Pseudoephedrine, Chlorpheniramine, and Sodium Benzoate in (Cold-Flu) Syrup Dosage Form.

A combination of paracetamol, pseudoephedrine, chlorpheniramine, and sodium benzoate in (Cold-Flu) 1,2,3 Syrup dosage form is specified for the treatment of common cold and flu symptoms. The functional role of this study is to develop a novel, reliable, and selective stability-indicating reversed-phase ultra-performance liquid chromatography (RP-UPLC) method for simultaneous identification of a quaternary mixture of paracetamol, pseudoephedrine, chlorpheniramine, and sodium benzoate in (Cold-Flu) 1,2,3 Syrup dosage form. The specific method is accomplished using an Acquity UPLC HSS T3 C18 column (2.1 mm × 100 mm), 1.8 µm particle size with pore size 100 Å, utilizing a mixture of purified water-methanol-trifluoroacetic acid (72.5:27.5:1.5, v/v) as the mobile phase at a flow rate of 0.3 mL/min. The column void volume is 1.15 min. UPLC detection is adjusted at 205 nm using a photodiode array detector. Calibration curves are obtained in the linearity ranges: 25-500 µg/mL for paracetamol, 10-50 µg/mL for pseudoephedrine, 0.5-5 µg/mL for chlorpheniramine, and 3-30 µg/mL for sodium benzoate with a correlation coefficient > 0.9992. The mean recovery of the developed method is tested and shows good recovery results between 99-101%; selectivity and forced degradation studies are investigated as per the International Council for Harmonisation Guidelines and no interference is detected due to degradation peaks. The proposed stability-indicating UPLC method for simultaneous determination of the three drugs, paracetamol, pseudoephedrine, and chlorpheniramine, with a preservative sodium benzoate in (Cold-Flu) 1,2,3 Syrup dosage form is successfully accomplished, developed, and validated, and can be easily used in the analysis of drugs in pure or dosage form. The novelty of the current research work lies in the development of the UPLC method for simultaneous determination of a quaternary mixture of paracetamol, pseudoephedrine, chlorpheniramine, and sodium benzoate in (Cold-Flu) 1,2,3 Syrup dosage form.

Variation with Temperature of Phase Ratio in Reversed Phase HPLC for a Methanol/Water Mobile Phase

The ratio between the volume of the stationary phase and the void volume of column in HPLC is known as the phase ratio (denoted by Φ). In almost all the thermodynamic studies based on van’t Hoff plots for estimating the values of standard enthalpy and standard entropy, the phase ratio of HPLC column is assumed to be temperature invariant. The validity of this assumption is examined in the present work by studying the variation of Φ with temperature (T) in the range of 20–50 °C for three commercially available C18 columns and two mobile phase compositions methanol/water. A procedure based on proportionality of retention factors k on octanol/water partition coefficients log Kow for several aromatic hydrocarbon homologues was used for the measurement of Φ. Variation of Φ with temperature was previously reported for RP-HPLC separations in an acetonitrile/water mobile phase. However, while for acetonitrile/water mobile phase the effective value of Φ is decreasing as the temperature increases, in the case of methanol/water mobile phase the variation is more complicated. In some cases Φ is decreasing similar to the case of acetonitrile/water mobile phase, but in other cases it decreases up to a point and then shows a slight increase. The study proves that the findings regarding variability of Φ with temperature for the case of acetonitrile/water mobile phase is not an unique effect. In addition, present study evaluates how much the calculation of standard enthalpy and entropy from van’t Hoff plots differ when the variation of Φ with temperature is taken into consideration as compared to the classic approach when Φ is considered a constant.

Use of Capillary Zone Electrophoresis Coupled to Electrospray Mass Spectrometry for the Detection and Absolute Quantitation of Peptidoglycan-Derived Peptides in Bacterial Cytoplasmic Extracts.

Peptidoglycan (PGN) is an essential structure found in the bacterial cell wall. During the bacterial life cycle, PGN continuously undergoes biosynthesis and degradation to ensure bacterial growth and division. The resulting PGN fragments (muropeptides and peptides), which are generated by the bacterial autolytic system, are usually transported into the cytoplasm to be recycled. On the other hand, PGN fragments can act as messenger molecules involved in the bacterial cell wall stress response as in the case of β-lactamase induction in the presence of β-lactam antibiotic or in triggering mammalian innate immune response. During their cellular life, bacteria modulate their PGN degradation by their autolytic system or their recognition by the mammalian innate immune system by chemically modifying their PGN. Among these modifications, the amidation of the ε-carboxyl group of meso-diaminopimelic acid present in the PGN peptide chain is frequently observed. Currently, the detection and quantitation of PGN-derived peptides is still challenging because of the difficulty in separating these highly hydrophilic molecules by RP-HPLC as these compounds are eluted closely after the column void volume or coeluted in many cases. Here, we report the use of capillary zone electrophoresis coupled via an electrospray-based CE-MS interface to high-resolution mass spectrometry for the quantitation of three PGN peptides of interest and their amidated derivatives in bacterial cytoplasmic extracts. The absolute quantitation of the tripeptide based on the [13C,15N] isotopically labeled standard was also performed in crude cytoplasmic extracts of bacteria grown in the presence or absence of a β-lactam antibiotic (cephalosporin C). Despite the high complexity of the samples, the repeatability of the CZE-MS quantitation results was excellent, with relative standard deviations close to 1%. The global reproducibility of the method including biological handling was better than 20%.

Evaluation of a linear free energy relationship for the determination of the column void volume in hydrophilic interaction chromatography

The application of a linear free energy relationship (LFER) to a variety of hydrophilic interaction chromatography columns with different bonded ligands and pore sizes was studied in order to determine their void volume Vm. The method was based on the determination of the elution volume of a series of alkylbenzene standards from C1 (toluene) to C17 (heptadecylbenzene). Results were compared with those obtained by injection of toluene alone, which has traditionally been used as a simple Vm marker. Vm was smaller when derived from the LFER plot than when measured with toluene with differences between the two methods ranging from 2.7 to 12.7 % for the columns studied. This result could be due to the small but appreciable retention of toluene due to its solubility in the water rich layer, which partially constitutes the stationary phase in HILIC. Larger pore size columns showed less difference in Vm between LFER and toluene procedures. This result may be due to size sieving effects of non-excluded solutes in the pores of the stationary phase, or to differences in phase ratio between columns of different pore size.

Size-exclusion and the void volume of HPLC column

Size-exclusion chromatography (SEC) is the main technique for determination of polymer molecular weight distribution. SEC elution volumes are limited by column void volume and interparticle volume. Measurements of these volumes at actual size-exclusion conditions is discussed together with the relationship of polymer retention to its hydrodynamic volume. We studied the retention of 32 polystyrene standards with polydispersity below 1.05 on 10 different commercial columns. Nine columns had silica based C18 modified packings, and one, polymer-based packing. Pore sizes of packing materials varied from 8 to 35 nm, and 3 packings were poroshell type. Propagation of the retention dependence on the cubic root of the polymer molecular weight to zero mass value was shown to correspond to the column void volume; and was consistent with other methods of void volume measurement. Observed linear dependencies of retention volumes on for low molecular weight polymers on all studied columns suggests a correlation between the product of the polymer hydrodynamic radius and the adsorbent surface area. This correlation is thoroughly discussed.

Development and modeling of two-dimensional fast protein liquid chromatography for producing nonstructural protein-free foot-and-mouth disease virus vaccine

Concerns for the use of non-purified or incompletely purified inactivated foot-and-mouth disease (FMD) vaccine, like difficulties for differentiation vaccinated from infected animals, can be a motivation in order to develop methods based on size exclusion chromatography (SEC). In this study, a two dimensional size exclusion chromatography (2D-SEC) system was successfully constructed using two different SEC column media to achieve a high-throughput purification system for the cell culture-derived foot and mouth diseases virus (FMDV). A mathematical model was also utilized to predict and to get a better insight into the separation process. Column and the packing particles characteristics such as column void volume, total column volume, particle porosity and accessible particle porosity was acquired experimentally. Retention times and elution profile of two different molecules, blue dextran and bovine serum albumin, were used for evaluating the capability of SEC media for separating two critical impurities (residual DNA (rDNA) and non-structural protein (NSP)) from active ingredient of vaccine (FMDV particle). Experiments were carried out with two different commercial columns (XK 26/60) and (XK 16/100) and with four different packing media superdex 200 prep grade, sephacryl S-500 HR, Sephacryl S-400 HR and Sephacryl S-300HR. The mathematical model was first validated by experimental chromatographic data of different SEC media and was then used to propose the best 2D-SEC system for downstream processing of the FMDV vaccine. The loading capacity of the constructed 2D-SEC sample was increased to 12.5% of total column volume and the purity of the final product was more than 90%. The entire purification process was performed with 77% FMDV recovery and 79.1% virus yield. Based on the high-performance size exclusion chromatography (HPSEC), the purity of the final NSP-free FMDV was about 90% and over 94.6% of host cell DNA was removed. Analyses of the purified FMDV by HPSEC, transmission electron microscopy (TEM) and dynamic light scattering (DLS) indicated that the final product had spherical shape with mean size about 30 nm and their structure remained intact.

Physicochemical and functional properties of acid precipitated soy proteins-maltodextrin conjugates.

Physicochemical and functional properties of acid precipitated soy proteins-maltodextrin conjugates.

Wide injection zone compression in gradient reversed-phase liquid chromatography

Chromatographic zone broadening is a common issue in microfluidic chromatography, where the sample volume introduced on column often exceeds the column void volume. To better understand the propagation of wide chromatographic zones on a separation device, a series of MS Excel spreadsheets were developed to simulate the process. To computationally simplify these simulations, we investigated the effects of injection related zone broadening and its gradient related zone compression by tracking only the movements of zone boundaries on column. The effects of sample volume, sample solvent, gradient slope, and column length on zone broadening were evaluated and compared to experiments performed on 0.32mm I.D. microfluidic columns. The repetitive injection method (RIM) was implemented to generate experimental chromatograms where large sample volume scenarios can be emulated by injecting two discrete small injection plugs spaced in time. A good match between predicted and experimental RIM chromatograms was observed. We discuss the performance of selected retention models on the accuracy of predictions and use the developed spreadsheets for illustration of gradient zone focusing for both small molecules and peptides.

Towards a generic variable column length method development strategy for samples with a large variety in polarity

The development of a novel set-up for the sequential analysis of compounds with a large variety in polarity on HILIC and reversed-phase columns, coupled in series, is discussed. For this purpose, a commercially available ultra-high performance LC system, equipped with two switching valves is employed. The switching valves allow connecting the HILIC and reversed-phase columns either in series or in parallel to the system. An interface to couple the HILIC and reversed-phase columns is developed and optimized. The sample is first injected onto a HILIC column. Apolar compounds in the sample are not retained and will elute close to or within the void volume of the HILIC column. Accurate switching of the valves allows redirecting these compounds towards a trap loop while more polar compounds are retained and separated on the HILIC column. After separation and detection of the polar compounds, the configuration of the valves is switched again to direct the apolar compounds from the trap loop towards a reversed-phase column for separation. To deal with the incompatibility of the mobile phases of HILIC and reversed-phase column separations, commercially available Jet weaver mixers are included in the set-up to allow for an intermediate solvent exchange. The proof-of-concept is demonstrated for the analysis of pharmaceuticals that can be found in waste water and surface water. It is demonstrated that the set-up provides robust analyses with peak capacities that are intermediate to one-dimensional and two-dimensional separations.

Overall Sulfation of Heparan Sulfate from Pancreatic Islet β-TC3 Cells Increases Maximal Fibril Formation but Does Not Determine Binding to the Amyloidogenic Peptide Islet Amyloid Polypeptide

Islet amyloid, a pathologic feature of type 2 diabetes, contains the islet β-cell peptide islet amyloid polypeptide (IAPP) as its unique amyloidogenic component. Islet amyloid also contains heparan sulfate proteoglycans (HSPGs) that may contribute to amyloid formation by binding IAPP via their heparan sulfate (HS) chains. We hypothesized that β-cells produce HS that bind IAPP via regions of highly sulfated disaccharides. Unexpectedly, HS from the β-cell line β-TC3 contained fewer regions of highly sulfated disaccharides compared with control normal murine mammary gland (NMuMG) cells. The proportion of HS that bound IAPP was similar in both cell lines (∼65%). The sulfation pattern of IAPP-bound versus non-bound HS from β-TC3 cells was similar. In contrast, IAPP-bound HS from NMuMG cells contained frequent highly sulfated regions, whereas the non-bound material demonstrated fewer sulfated regions. Fibril formation from IAPP was stimulated equally by IAPP-bound β-TC3 HS, non-bound β-TC3 HS, and non-bound NMuMG HS but was stimulated to a greater extent by the highly sulfated IAPP-bound NMuMG HS. Desulfation of HS decreased the ability of both β-TC3 and NMuMG HS to stimulate IAPP maximal fibril formation, but desulfated HS from both cell types still accelerated fibril formation relative to IAPP alone. In summary, neither binding to nor acceleration of fibril formation from the amyloidogenic peptide IAPP is dependent on overall sulfation in HS synthesized by β-TC3 cells. This information will be important in determining approaches to reduce HS-IAPP interactions and ultimately prevent islet amyloid formation and its toxic effects in type 2 diabetes.

Effect of extra‐column volume on practical chromatographic parameters of sub‐2‐μm particle‐packed columns in ultra‐high pressure liquid chromatography

Effects of extra-column volume on apparent separation parameters were studied in ultra-high pressure liquid chromatography with columns and inlet connection tubings of various internal diameters (id) using 50-mm long columns packed with 1.8-μm particles under isocratic conditions. The results showed that apparent retention factors were on average 5, 11, 18, and 41% lower than those corrected with extra-column volumes for 4.6-, 3.0-, 2.1-, and 1.0-mm id columns, respectively, when the extra-column volume (11.3 μL) was kept constant. Also, apparent pressures were 31, 16, 12, and 10% higher than those corrected with pressures from extra-column volumes for 4.6-, 3.0-, 2.1-, and 1.0-mm id columns at the respective optimum flow rate for a typical ultra-high pressure liquid chromatography system. The loss in apparent efficiency increased dramatically from 4.6- to 3.0- to 2.1- to 1.0-mm id columns, less significantly as retention factors increased. The column efficiency was significantly improved as the inlet tubing id was decreased for a given column. The results suggest that maximum ratio of extra-column volume to column void volume should be approximately 1:10 for column porosity more than 0.6 and a retention factor more than 5, where 80% or higher of theoretically predicted efficiency could be achieved.

Capillary electrophoresis‐mass spectrometry methods for tryptic peptide mapping of therapeutic antibodies

Tryptic peptide mapping is routinely used in the biotech industry to confirm primary sequence, cell line stability, and to analyze posttranslational modifications. Peptide analysis is generally done by reverse phase liquid chromatography with UV or mass spectrometric detection. This method provides excellent resolution and sequence coverage. However, traditional methods are slow, and generally cannot detect small, hydrophilic peptides due to coelution with the column void volume. In this work, complementary CE-MS peptide analysis methods have been developed. The analyses are performed on a traditional CE-MS instrument with a sheath interface, and also on a novel sheathless interface that promises improved resolution and limit of detection. The methods were performed on a tryptic digest of a therapeutic monoclonal antibody for which LC-MS detects 97% sequence coverage. The 3% not covered consists of 11 peptides containing three amino acids or fewer, including two in the critical complementarity binding domain. Without further processing, the same tryptic digest was analyzed by CE-MS. Separation and detection of the 11 small peptides was achieved on CE-MS systems with both interfaces. The sheathless system produced better peak capacity and gave mass spectra with significantly less noise, while the sheath system proved to have better repeatability.

Overcoming non-specific adsorption issues for AZD9164 in human urine samples: Consideration of bioanalytical and metabolite identification procedures

A key challenge in the development of robust bioanalytical methods, for the determination of drug analyte in human urine samples, is the elimination of potential analyte losses as a result of non-specific adsorption to container surfaces in which the samples are collected, stored or processed. A common approach to address adsorption issues is to treat the urine samples with additives that serve to increase analyte solubility and/or minimise interaction with the container surfaces. A series of adsorption experiments were performed on human urine samples containing an adsorption-prone in-house development compound (AZD9164). A roller-mixing methodology was employed to maximise sample interaction with container surfaces and quantification of analyte was performed by LC–MS/MS following minimal sample preparation. In the absence of any urine additive, adsorptive losses averaged 35% but were highly variable between different lots of urine. In the presence of a range of additives, including the surfactants Tween 80, 3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulphonate (CHAPS) and sodium dodecylbenzenesulphonate (SDBS), analyte adsorption was shown to be eliminated. Of particular academic interest was the finding that adsorptive losses could also be reduced upon the addition of phospholipid. The presence of additive generally had no marked impact on the analyte MS response but the use of an isotopically labelled internal standard satisfactorily compensated for instances in which ion suppression was observed, e.g. in the presence of Tween 80. Since metabolite profiling/identification investigations are often performed on urine samples originating from early clinical pharmacology studies, the elution of selected additives was also monitored by MS. CHAPS, dimethylacetamide (DMA) and HP-β-cyclodextrin eluted as single chromatographic peaks in, or just after, the column void volume whilst polymeric Tween 80, and to a lesser extent SDBS, eluted over a wide retention time window. The potential of the latter surfactants to obscure the detection of unknown metabolites is significant and therefore their use in urine samples, upon which metabolite investigations are to be performed, is not recommended. Upon consideration of other factors such as additive cost and toxicity, CHAPS was selected for use in development of the validated assay.

Comparison of Concentration Pulse and Tracer Pulse Chromatography: Experimental Determination of Eluent Uptake by Bridged-Ethylene Hybrid Ultra High Performance Liquid Chromatography Packings

Abstract Excess volume isotherms of acetonitrile and methanol sorbed on a C 18 BEH UHPLC packing were determined over a range of pressure, temperature, flow rate and eluent composition. The isotherm measurements were carried out by two independent experimental methods, viz. , concentration pulse and tracer pulse chromatographies. Isotherms were measured with both experimental techniques at 30, 45 and 60 °C. The excess isotherms increased with decreasing temperature although the variations were relatively small. Direct comparison of the two experimental techniques showed that the measured void volumes were identical within experimental error. The measured excess volumes by both techniques were comparable with the concentration pulse experiments producing slightly higher excess volume data with highly aqueous eluents. Both experimental techniques show some variations of the retention volumes with sample volume, sample composition, flow rate and column inlet pressure. The results confirmed the validity of both concentration and tracer pulse chromatographies for the determination of column void volumes and the excess volume of eluent taken up by UHPLC packings.

Comparison of concentration pulse and tracer pulse chromatography: Experimental determination of eluent uptake by bridged-ethylene hybrid ultra-high performance liquid chromatography packings

Excess volume isotherms of acetonitrile and methanol sorbed on a C(18) BEH UHPLC packing were determined over a range of pressure, temperature, flow rate and eluent composition. The isotherm measurements were carried out by two independent experimental methods, viz., concentration pulse and tracer pulse chromatographies. Isotherms were measured with both experimental techniques at 30, 45 and 60 °C. The excess isotherms increased with decreasing temperature although the variations were relatively small. Direct comparison of the two experimental techniques showed that the measured void volumes were identical within experimental error. The measured excess volumes by both techniques were comparable with the concentration pulse experiments producing slightly higher excess volume data with highly aqueous eluents. Both experimental techniques show some variations of the retention volumes with sample volume, sample composition, flow rate and column inlet pressure. The results confirmed the validity of both concentration and tracer pulse chromatographies for the determination of column void volumes and the excess volume of eluent taken up by UHPLC packings.

Trace analysis of environmental matrices by large-volume injection and liquid chromatography–mass spectrometry

The time-honored convention of concentrating aqueous samples by solid-phase extraction (SPE) is being challenged by the increasingly widespread use of large-volume injection (LVI) liquid chromatography-mass spectrometry (LC-MS) for the determination of traces of polar organic contaminants in environmental samples. Although different LVI approaches have been proposed over the last 40 years, the simplest and most popular way of performing LVI is known as single-column LVI (SC-LVI), in which a large-volume of an aqueous sample is directly injected into an analytical column. For the purposes of this critical review, LVI is defined as an injected sample volume that is ≥10% of the void volume of the analytical column. Compared with other techniques, SC-LVI is easier to set up, because it requires only small hardware modifications to existing autosamplers and, thus, it will be the main focus of this review. Although not new, SC-LVI is gaining acceptance and the approach is emerging as a technique that will render SPE nearly obsolete for many environmental applications. In this review, we discuss: the history and development of various forms of LVI; the critical factors that must be considered when creating and optimizing SC-LVI methods; and typical applications that demonstrate the range of environmental matrices to which LVI is applicable, for example drinking water, groundwater, and surface water including seawater and wastewater. Furthermore, we indicate direction and areas that must be addressed to fully delineate the limits of SC-LVI.

Determination of catecholamines in urine using hydrophilic interaction chromatography with electrochemical detection

The determination of catecholamines in urine was investigated using hydrophilic interaction chromatography (HILIC) as an alternative to the commonly used reversed-phase (RP) method. A number of different approaches were explored, including per-aqueous liquid chromatography (PALC), and HILIC using bare silica, bonded amide and zwitterionic phases. The bonded phases gave superior results in terms of both peak shape and selectivity. The mechanism of the HILIC separation was investigated particularly with respect to the contribution of ion exchange to retention. The electrochemical detection of catecholamines was studied and optimised in typical HILIC mobile phases that contain high concentrations of acetonitrile. HILIC offered a number of advantages over the conventional RP approach, giving good retention of the solutes without use of ion pair reagents, the absence of which also would facilitate detection by mass spectrometry. HILIC used in conjunction with solid phase extraction based on RP also gives orthogonal separation mechanisms in the cleanup and analysis steps. Furthermore, good recoveries from the cleanup stage were obtained, as high concentrations of acetonitrile can be used as eluting solvent that are fully compatible with HILIC, and lipophilic impurities are eluted close to the void volume of the HILIC column.