Collisional Orogens Research Articles

Tectonic switch of the north Yangtze Craton at ca. 2.0 Ga: Implications for its position in Columbia supercontinent

Two episodes of magmatism with zircon U-Pb ages of 2.46 Ga and 2.0 Ga were studied in the Jinpan Complex in the north Yangtze Craton of South China. The ca. 2.46 Ga gneissic granites with various chemical compositions were formed by remelting of different crustal materials in a collisional event. The occurrence of both negative and positive whole-rock εNd(t) and εHf(t) values in these rocks indicates the growth of juvenile crust and reworking of Archean crust during early Paleoproterozoic. The ca. 2.0 Ga trondhjemites have high (La/Yb)N and Sr/Y ratios as well as negative whole-rock εNd(t), εHf(t) and zircon εHf(t) values, suggesting that they were formed by remelting of thickened lower crust in a collisional orogen. The ca. 2.0 Ga A-type granites have high Zr, Nb, Y contents and Ga/Al, Y/Nb ratios, belonging to A2 type granite. Their negative whole-rock εNd(t), εHf(t) and zircon εHf(t) values are similar to those of the ca. 2.0 Ga trondhjemites. These evidences suggest that they were produced by remelting of the residue after extraction of earlier granitic magma in an extensional tectonic setting. The 2.0 Ga mafic dykes show significant enrichment in LILEs but weak negative Nb, Ta anomalies and various Nb/U ratios. This is consistent with a parent magma similar to continental flood basalts and experienced different degrees of crust contamination. The co-occurrence of 2.0 Ga trondhjemites, A-type granites and mafic dykes implies a tectonic switch from convergence to extension at ca. 2.0 Ga in the north Yangtze Craton. Based on the similarities of the ca. 2.0 Ga magmatic rock association and metamorphic records in the north Yangtze Craton and south Siberia, the position of the Yangtze Craton in Columbia supercontinent is proposed to be close to south Siberia.

AN UNUSUAL EARLY EOCENE, SYNCOLLISIONAL CARBONATITE COMPLEX AND RELATED RARE EARTH ELEMENT DEPOSIT IN THE INDIA-ASIA COLLISION ZONE, NORTHWESTERN VIETNAM

Abstract Carbonatite-related rare earth element (REE) deposits, the most significant source of REEs globally, are normally generated in extensional settings, such as intracontinental rifts, mantle plume-related environments, or postcollisional orogens. Syncollisional orogens represent overall compressional regimes, so carbonatites and related REE deposits are rarely identified in such a setting. However, this study reports an anomalous syncollisional carbonatite-related REE deposit, Dong Pao, in the India-Asia collision zone in northwestern Vietnam. The Dong Pao deposit is dated at ca. 52 to 51 Ma through zircon and bastnäsite Th-U-Pb chronometers. The ore-hosting carbonatites were emplaced as stocks with associated syenite. The carbonatite-syenite complex is significantly enriched in light REEs, Ba, and Sr and depleted in high-field strength elements, and has high (87Sr/86Sr)i ratios (>0.707) and low εNd(t) values (–6.5 to –5.6). These geochemical signatures imply that the carbonatite-syenite complex was derived from partial melting of subcontinental lithospheric mantle previously metasomatized and fertilized by REE- and CO2-bearing fluids. Timing of the REE-rich carbonatite-syenite complex indicates that it was related to a far-field stress within the early Eocene main-collision stage at 52 to 51 Ma rather than the late-collision stage at 42 to 35 Ma as previously thought. Collisional tectonism involving block rotation and fault activation are interpreted to have induced disturbance of the lithosphere mantle and created localized, transtensional/extensional environments oblique to the trend of the orogen that facilitated emplacement of the REE-rich carbonatitic magmas. Dong Pao appears to be the first identified, high-tonnage REE deposit that formed in the syncollisional geodynamic setting. Such a finding highlights that tectonic disturbance of an REE-rich lithosphere mantle distal to collision sutures has the potential to generate REE deposits, even during prominent convergence and collision of continents. As such, it defines additional search spaces for exploration of other REE orebodies of this style in complex collisional orogens.

Don't judge an orogen by its cover: Kinematics of the Appalachian décollement from seismic anisotropy

Abstract As North America collided with Africa to form Pangea during the Alleghanian orogeny, crystalline and sedimentary rocks in the southeastern United States were thrust forelandward along the Appalachian décollement. We examined Ps receiver functions to better constrain the kinematics of this prominent subsurface structure. From Southeastern Suture of the Appalachian Margin Experiment (SESAME) and other EarthScope stations on the Blue Ridge–Piedmont crystalline megathrust, we find large arrivals from a 5–10-km-deep converter. We argue that a strong contrast in dipping anisotropic foliation occurs at the subhorizontal Appalachian décollement, and propose that such a geometry may be typical for décollement structures. Conversion polarity flips can be explained by an east-dipping foliation, but this orientation is at odds with the overlying northeast-trending surface tectonic grain. We suggest that prior to late Alleghanian northwest-directed head-on collision, the Appalachian décollement accommodated early Alleghanian west-vergence, independent of the overlying Blue Ridge–Piedmont structural inheritance. The geophysical expression of dipping anisotropic foliation provides a powerful tool for investigating subsurface kinematics, especially where they are obscured by overlying fabric, to disentangle the tectonic complexities that embody oblique collisional orogens.

Orogenic belt resulting from ocean-continent collision

Abstract Orogenic belts have been thought to form through plate convergence, involving subduction of oceanic lithosphere at continental margins (accretionary orogens), which may ultimately lead to ocean closure and continent-continent collision (collisional orogens). Intraplate orogens away from plate margins have been known, but the mechanisms controlling their evolution are poorly understood. The South China craton, including the Yangtze and Cathaysia blocks, underwent a Paleozoic orogenesis that formed a >500-km-wide orogenic belt with widespread granitoids that are unconformably overlain by Devonian cover sequences. The pre-Devonian basement rocks were subjected to strong deformation and greenschist-to amphibolite-facies metamorphism at 460–400 Ma. Paleozoic magmatism was characterized by voluminous crustally derived Silurian granitoids associated with incorporation of ancient crustal materials at 450–440 Ma and addition of juvenile mantle-derived melts at 420–410 Ma. Based on the absence of arc-like magmatism and the existence of ophiolites in the West Cathaysia terrane, geochemical evidence that oceanic crust existed beneath the East Cathaysia terrane, and geophysical evidence of contrasting lithospheres on both sides and two discrete slabs beneath their fault boundary, we propose that this Paleozoic orogenic belt was formed by collision between the two terranes that was driven by far-field forces during the assembly of Gondwana, and the East Cathaysia terrane represents oceanic lithosphere that was overthrusted by the continental crustal materials of the West Cathaysia terrane. Numerical modeling shows that this type of collision can explain the dynamics of the Paleozoic orogenesis in the South China craton and may be a mechanism for some orogens in which subduction-related igneous and metamorphic rocks are lacking.

Allanite in Variscan Post-Collisional Lamprophyre Dykes from Les Guilleries (NE Iberia) as a Part of Rare Earth Elements Recycling in Collisional Orogens

Recent studies of Late Permian calc-alkaline lamprophyre dykes located in the Les Guilleries Paleozoic massif of the Catalan Coastal Range have revealed that allanite is present as the main REE-bearing accessory phase, which is the object of this study. The lamprophyre dykes are amphibole–plagioclase-dominated spessartites with a wide variety of accessory phases, including titanite, ilmenite, allanite, fluorapatite, spinel, zircon, and sulfides, and show complex alteration textures related to secondary albite, chlorite, epidote, titanite and calcite. The allanite crystal composition, analyzed by SEM-EPMA and LA-ICP-MS, evidences the solid solution between epidote and allanite with a ferriallanite component, similar to what is found in Variscan post-collisional granitoids from western Europe. However, heterogeneity in crystal shapes, sizes, type of zoning, dissolution embayment textures, growth of epidote coronas, mineral paragenesis, and the unique geochemical characteristics of allanite crystals suggest multiple crystallization events. At least two types of allanite–epidote composite grains have been identified: allanite Type I, with regular allanite–epidote core-to-rim zoning and a secondary allanite rim; and allanite Type II, with anhedral allanite cores surrounded by epidote coronas. Additionally, irregular zoning, complex dissolution textures and REE redistribution suggest the occurrence of deuteric and/or post-magmatic processes, which are also common in Variscan post-collisional plutons from the Catalan Coastal Range and nearby Paleozoic massifs. Multivariate statistical analyses of major elements in allanite–epidote composite grains show a relationship between major textural and geochemical variations for three out of ten principal components, mainly related to cationic substitutions between ferriallanite-(Ce) and epidote, but also involving Mn and Ti(REE3+ + Fe2+ + Ti4+ + Mg2+ + Mn2+ = Al3+ + Ca2+ + Fe3+). The allanite U-Pb-Th- weighted mean age of 265 ± 15 Ma (MSWD = 0.57) is roughly similar to the age of emplacement of the lamprophyres in the upper crust in the mid–late Permian, and coincides with the period following the main tectonometamorphic and magmatic events of the post-collisional evolution in the Catalan Coastal Range. Th/U and La/Sm ratios suggest a metamorphic origin for most allanite grains, but a combination of metamorphic processes prior to partial melting, early–late magmatic crystallization, and/or post-magmatic hydrothermal processes is the most plausible explanation to account for the diversity of allanite grains in Les Guilleries lamprophyres.

Petrogenesis of Mo-associated Mesozoic granitoids on the Jiaodong Peninsula: Implications for crustal architecture and Mo mineralization along the Dabie–Sulu Orogen

Recent studies have demonstrated a linkage between the crustal architecture and the location of magmatic–hydrothermal Cu deposits in collisional orogens. However, if and how the crustal architecture controls the distribution of magmatic–hydrothermal Mo deposits in collisional orogens is unclear. Here, we present zircon U–Pb dating, geochemical and Sr–Nd–Hf–O isotopic data for granitoids associated with Mesozoic Mo mineralization on the Jiaodong Peninsula which exhibits substantial endowment differences to the Dabie Orogen. Geochronology data show that the Mo-associated granitoids occurred at ca. 160 Ma and 117 Ma. The Jurassic Mo-associated monzogranite was derived from melting of the thickened North China Block lower crust in a subduction-related setting. The Early Cretaceous Mo-associated granodiorite and granite were originated from a modified North China Block thorough crust–mantle interactions, induced by rollback of the Paleo-Pacific Plate. Our results complemented by published data indicate a crustal architecture characterized by South China Block gneisses overlying North China Block lower crust in the Sulu Orogen and wedging into the North China Block in the Jiaobei Terrane. By comparing the Mo–associated granitoids in Dabie Orogen and Jiaodong Peninsula, we conclude that magma source differences controlled by crustal architectures lead to Mo endowment diversities along the Dabie–Sulu Orogen.

Tectonics and sedimentology of accretionary and collisional orogens

The Eocene magmatic flare-up in the Northern Qiangtiang Block is a key event that was genetically related to the uplift of the Tibetan Plateau. This uplift has been considered to have an important impact on the global cooling and oceanic isotopic compositions. Here, we report zircon ages and bulk rock elemental and isotopic compositions for high-silica porphyritic granites in the Maliaoshan area of the Northern Qiangtang Block. Zircon U–Pb dating shows that the porphyritic granites were generated at ca. 41.02 Ma. The porphyritic granites are characterized by uniformly high SiO2 contents (74.3–75.0 wt%), high contents of total alkalis, metaluminous compositions, and low contents of TiO2, Fe2O3T, MgO, CaO, and P2O5. Moreover, the Maliaoshan porphyritic granites have Nd–Hf isotopic compositions similar to those of coeval metaluminous magmatic rocks in the Northern Qiangtang Block. These data together with geochemical modeling results suggest that the Maliaoshan porphyritic granites were formed by the fractional crystallization of 43.06% major minerals and 0.76% accessory minerals from the assumed starting composition (average Eocene metaluminous igneous rock). Based on our new data and Eocene magmatic flare-up event in the Northern Qiangtiang Block, we propose a new geodynamic model to explain such a magmatic flare-up event. The stress produced by the collision of India and Eurasia gradually transferred northward, prompting the Songpan–Garzê Block to subduct southward beneath the Northern Qiangtang Block at ca. 55 Ma, accompanied by minor magmatic activity. Subsequently, the break-off of the Songpan–Garzê Block at ca. 46 Ma resulted in the Eocene magmatic flare-up.

The effect of crystal fractionation on the geochemical composition of syn-exhumation magmas: Implication for the formation of high δ56Fe granites in collisional orogens

Syn-exhumation magmatism in collisional orogens is an important process for crustal differentiation and crust-mantle interaction at convergent plate boundaries. It is intriguing to elucidate which factors control the geochemical composition of such magmatic products. To answer this question, a combined study of whole-rock major-trace elements and Nd-Fe isotopes, mineral O isotopes, and zircon U–Pb ages and trace elements was carried out for syn-exhumation granites from the Sulu ultrahigh-pressure (UHP) metamorphic belt in east-central China. Several granitic plutons of Triassic age were newly found in this typical collisional orogen, with a total exposure area of ∼10 km2, suggesting large-scale partial melting of the deeply subducted continental crust in the terminal stage of continental collision. Field observations indicate that the massive granites show little deformation. The granites are high-K calc-alkaline and exhibit enrichment in LILE and LREE but depletion in HFSE relative to HREE in trace element distribution patterns. Zircons in these granites contain relict magmatic cores characterized by steep HREE patterns with strong negative Eu anomalies. These cores show middle Neoproterozoic U-Pb ages of 724–779 Ma, consistent with the protolith age of UHP metaigneous rocks in the Dabie-Sulu orogenic belt. Zircon rims exhibit oscillatory zoning, and are characterized by Triassic U-Pb ages of 210–216 Ma, low LREE contents and steep HREE patterns with significant negative Eu anomalies, suggesting their growth from granitic magmas during exhumation of the deeply subducted continental crust. The granites have low δ18O values of 2.0–6.1‰ for quartz, 1.1–5.2‰ for whole-rock, and 0.9–3.2‰ for zircon cores. The low δ18O values and Neoproterozoic U-Pb ages of zircon cores in the granites are characteristic feature of the deeply subducted continental crust in the northern margin of the South China Block. One coesite inclusion was found in the anatectic zircon rim, pointing to the deep origin of anatectic melts at a subarc depth of >80 km. Whole-rock SiO2 contents are correlated with major and trace elements, which are ascribed to crystal fractionation of mainly biotite and plagioclase during magma evolution. In particular, these granites exhibit highly variable δ56Fe values from 0.05 to 0.30‰, which are correlated with Fe3+/ΣFe, SiO2, Al2O3, Nb/Ta and Eu/Eu*. This suggests that the crystal fractionation of biotite would have controlled the Fe isotope variation in the granites. Therefore, the syn-exhumation granites experienced significant geochemical differentiation mainly through the fractional crystallization during the magma evolution. A compilation of syn-exhumation granites in the typical collisional orogens of the world shows that such granites were mainly formed through dehydration melting of hydrous minerals during decompressional exhumation. They fall into the magnesian group with relatively low REE and HFSE (like Ti, Nb and Zr) contents, distinct from the geochemical compositions of A-type granites. Therefore, syn-exhumation granites record crustal differentiation in the terminal stage of continental collision.

Petrology and geochronology of sapphirine‐bearing granulites from the Limpopo Complex in eastern Botswana: Implications for Palaeoproterozoic long‐lived high‐pressure/ultrahigh‐temperature metamorphism and rapid exhumation

The Limpopo Complex in southern Africa is a classic example of Neoarchean collisional orogens with a Palaeoproterozoic thermal overprint. We report new petrological, pressure–temperature (P–T), and geochronological data of sapphirine‐bearing Mg–Al‐rich and pelitic granulites from a metasupracrustal unit (the Beit Bridge Complex [BBC]) in the eastern part of Botswana to constrain its P–T–time evolution. Textural observations and phase equilibria modelling of the peak mineral assemblage of Mg–Al‐rich granulites (K‐feldspar + orthopyroxene [Opx2; Al2O3 up to 8.8 wt.%] + sillimanite [Sil2] + quartz + rutile + biotite [Bt2] + inferred melt) in the NCKFMASHTO system recorded a peak metamorphic condition of >930°C and > 10.3 kbar. A pelitic granulite recorded consistent P–T conditions of 960–980°C and > 10.3 kbar, indicating high‐pressure (HP) and ultrahigh‐temperature (UHT) metamorphism for the BBC in Botswana. Post‐peak retrograde conditions were obtained based on the stability of sapphirine + cordierite symplectite assemblage in the Mg–Al‐rich rocks (820–860°C and 6.4–7.0 kbar) and orthopyroxene [Opx3] + cordierite symplectite assemblage in the pelitic granulite (830–930°C and 4.3–5.8 kbar), indicating near‐isothermal decompression after the peak HP–UHT metamorphism along a clockwise P–T path. Similar HP–UHT metamorphism followed by a near‐isothermal decompression along a clockwise P–T path was reported from different regions of the BBC in South Africa and Zimbabwe (P > 14 kbar and ~1,000°C based on the stability fields of magnesian staurolite and sapphirine + quartz assemblage), although the peak P–T condition is slightly lower in Botswana. Monazite grains with patchy zoning show isochron ages of 2,115 ± 77 Ma for Th‐poor domains, and 2,058 ± 40 Ma and 2,033 ± 34 Ma for Th‐rich domains. Similar ages were obtained from zircon U–Pb geochronology as 2,232–2,135 Ma and 2,010 ± 19 Ma (Th/U = 0.05–0.26). The younger ages (2.0 Ga) probably indicate the timing of near‐peak high‐grade event, while the older ages might indicate a thermal event during the prograde heating stage. The P–T conditions and zircon/monazite ages suggest Palaeoproterozoic long‐lived metamorphism associated with intracontinental transpressional tectonics related to Palaeoproterozoic orogenic events around the united Zimbabwe–Kaapvaal Craton.

Tectonics and geothermal gradients from subduction to collision in the NW Variscan Iberian Massif

ABSTRACT The earliest tectonometamorphic record of tectonic slices incorporated to the base of an orogen holds the key to understand how an orogen is built. The tectonic pile of the NW Iberian section of the Variscan Orogen includes tectonic slices separated by crustal-scale thrusts. The earliest tectonometamorphic record in the uppermost parautochthon is calculated at 11–14 kbar and 450–500°C (P-T gradient about 13°C/km), suggesting a subduction-related metamorphic recrystallization at lower pressure than the overlying Lower Allochthon. Early conditions calculated in the autochthon (9–10 kbar and 425–450°C; 16°C/km) point to a relatively ‘cold’ collisional setting. Higher thermal gradients obtained from some sections of the autochthon (11–12 kbar and 700–725°C; 21°C/km) and the Lower Parautochthon (7.5 kbar and 550–700°C; 24–31°C/km), correspond to more advanced and ‘hot’ stages of collision. New U–Pb monazite geochronology indicates a 318–311 Ma age for the final formation of HT domes in the region. We propose the rapid decrease in P-T gradient (from <10 to 16°C/km) documents a fail to sustain further burial along a regular subduction zone. We consider the subsequent increase in the geothermal gradient (from 16 to 31°C/km) as the culmination of previous crustal accretion and the onset of crustal underthrusting and later processes in a collisional stage. We propose these switches in the early tectonometamorphic record of individual tectonic slices as potential markers to track the transition from subduction to collision in collisional orogens.

Deformation and temperature variation along thrust-sense shear zones in the hinterland-foreland transition zone of collisional settings: A case study from the Barbagia Thrust (Sardinia, Italy)

In the Internal Zone of a continental collisional orogen, first-order contractional shear zones accommodate crustal shortening. Structural investigations at different scales, flow kinematics, and finite strain analyses are fundamental tools to determine how deformation is accommodated and partitioned. Spatial temperature variations can be responsible for the dynamic weakening and strain localization in the crust, therefore understanding the thermal conditions of shearing and deformation is critical. We integrate field observations, meso- and microstructural analyses, kinematic vorticity estimations, and finite strain data with a quantitative thermometric analysis by Raman spectroscopy on carbonaceous material along a ductile shear zone: the Barbagia Thrust (BT) in the hinterland-foreland transition zone of the Sardinian Variscan belt. These analyses, performed in two different parts of the shear zone, yield similar finite strain gradients, albeit with an increasing component of simple shear with increasing temperature, highlighting the feedback between temperature and vorticity. Our results best fits with a tectonic scenario with shear heating, where higher magnitude gradients correspond to higher vorticity and finite strain values, which indicate greater shear and heating values. The heating quantified along the BT (~50°C) is compared favorably to numerical and mechanical models. We demonstrate how the BT represents a major tectonic boundary separating the internal sector belonging to the metamorphic core of the belt from the external one involved in the orogenic wedge system.

An Experimental Study of Partial Melting of Metafelsic Rocks: Constraints on the Feature of Anatectic Melts and the Origin of Garnets in Collisional Orogens

An Experimental Study of Partial Melting of Metafelsic Rocks: Constraints on the Feature of Anatectic Melts and the Origin of Garnets in Collisional Orogens

Constraining the Timing of Evolution of Shear Zones in Two Collisional Orogens: Fusing Structural Geology and Geochronology

In recent decades, constraining the timing of shear activity has been one of the main topics of research about the tectono-metamorphic evolution of orogenic belts. We present a review of a combined structural and geochronological approach to two major ductile regional shear zones, in two collisional orogens: the first one affecting the Variscan basement in northern Sardinia (Italy) and the External Crystalline Massifs of the Alps (East Variscan Shear Zone; EVSZ), and the second one deforming the medium- to high-grade rocks of the metamorphic core of the Himalaya (High Himalayan Discontinuity). High-resolution, texturally and chemically controlled monazite geochronology applied in separated shear zones of the Variscan belt allowed recognizing a similar timing of activity ranging between c. 340–330 and 300 Ma. This approach led to a better understanding of the evolution of the EVSZ, supporting a model where several branches were active according to a growth by linkage model. Following a similar approach, in situ U-Th-Pb analysis of monazite constrained the timing of top-to-the-S/SW shearing of a regional-scale High Himalayan Discontinuity in the Himalayan belt to between c. 28 Ma and 17 Ma. Earlier exhumation of the hanging wall was triggered by shear zone activity, whereas at the same time, the footwall was still experiencing burial with increasing P-T conditions. The timing of shearing of this shear zone fits with an in-sequence shearing tectonic model for the exhumation of the Himalayan mid-crust.

Elemental and Sr-Nd-Pb-Hf Isotope Signatures of Early Cretaceous Magmatic Rocks in the Wulian Area, Eastern Shandong: Implications for Crust-Mantle Interaction at the Edge of the Sulu Collisional Orogenic Belt

Abstract We present new whole-rock geochemical, Sr-Nd-Pb isotopic, and zircon U-Pb and Hf isotopic data for Early Cretaceous magmatic rocks (trachy-andesite, pyroxene diorite, diorite porphyrite, and dolerite) in the Wulian area of Shandong, eastern North China. These data are used to constrain the mechanism of crust-mantle interaction at the edge of the Sulu orogenic belt. The belt formed by the collision of the Yangtze Craton (YC) and the North China Craton (NCC) during the Mesozoic. New zircon U-Pb dating indicates that the magmatic rocks were formed during the Early Cretaceous (123-124 Ma). These rocks are characterized by moderate contents of SiO2 (50.0-60.0 wt.%), MgO (3.3-5.6 wt.%), Cr and Ni with low Nb/U ratios (0.8-11.8), and high La/Nb (5.2-24.5) and Ba/La ratios (12.3-38.1). They are enriched in large ion lithophile elements, depleted in high field strength elements, and are characterized by high initial 87Sr/86Sr values (0.7079-0.7088) and low εNdt (-20.6 to -14.6). The samples have relatively low initial 206Pb/204Pb (16.38-17.18), 207Pb/204Pb (15.38-15.48), and 208Pb/204Pb (37.24-37.83) values. The Sr-Nd-Pb-Hf isotopic characteristics of the samples are similar to those of mafic rocks in the Sulu orogenic belt, suggesting that they might have similar sources. It is clear that the magma source of the samples involves both crustal and mantle materials and so we propose a model for crust-mantle interaction at the edge of Sulu orogenic belt. In this model, the Yangtze plate subducted deep below the northwestern NCC during the Triassic and was trapped in the lithospheric mantle. In the early Cretaceous, lithospheric extension in combination with asthenospheric upwelling resulted in partial melting of the overlying lithospheric mantle. The magmatic rocks in the Wulian area were generated by mixing between melts of both the lithospheric mantle of the NCC and the residual lower crust of the YC. This study therefore provides significant information on crust-mantle interaction at a continental subduction zone.

Wedge tectonics in South China: constraints from new seismic data

Collisional orogens form when tectonic forces amalgamte fragments of Earth’s continental lithosphere. The sutures between individual fragments, or terranes, are potential sites of weakness that facilitate subsequent continental breakup. Therefore, the lithospheric architecture of collisional orogens provides key information for evaluating the long-term evolution of the continental interior: for example, the South China Block (SCB), where the tectonic history is severely obscured by extensive surface deformation, magmatism, and metamorphism. Using new passive-source seismic models, we show a contrasting seismic architecture across the SCB, with three prominent crustal dipping structures across the Jiangnan Orogen. Combined with constraints from multi-disciplinary regional geophysical datasets, these pronounced dipping patterns are interpreted as relict wedge-like lithospheric deformation zones initiated in the fossil collisions that assembled the Yangtze Block and the SCB. The overall trend of these tectonic wedges implies successive crustal growth along paleo-continental margins and is indicative of northward subduction and docking of accretional terranes. In contrast, no such dipping structures are preserved in the Cathaysia Block, indicating a weak and reorganized lithosphere. The variations in the deformation responses across the SCB reflect the long-term modifications of the lithosphere caused by prolonged collision and extension events throughout the tectonic history of the SCB. Our results demonstrate the critical roles that suture zones played in the successive growth and evolution of the continental lithosphere.

Identification of UHT Granulites in the Pan-African Dahomeyide Suture Zone in SE Ghana: Implications for Evolution of Collisional Orogens

AbstractThis study presents the petrology, geochemistry, U–Pb ages, Lu–Hf and oxygen isotope compositions of Adaklu mafic granulites (ADMGs), from the Pan-African Dahomeyide suture zone in southeastern Ghana. The ADMGs show mafic precursor with low-K tholeiitic affinity. They display convex rare earth and trace elements characteristics without any obvious anomalies of Eu, Ti, Nb and Ta. The geochemical characteristics of ADMGs mimic those of N-MORB. Zircon U–Pb dating on the ADMGs reveals granulite facies metamorphic ages of ca. 595–602 Ma. However, a few zircons yield relatively older apparent 206Pb/238U ages of ca. 620 Ma, representing prograde metamorphic age. ADMGs preserve mean zircon εHf (t) values of +7.0 to +9.7 and δ18O values of 6.1–8.0‰. Based on petrographic observations, geothermobarometric calculations using conventional thermobarometry, mineral equilibria modeling, Ti-in-zircon and Zr-in-rutile thermometers reveal peak granulite facies P–T conditions of 0.95–1.2 GPa/940–1000°C, and retrograde amphibolite facies conditions of 0.83–0.93 GPa/575–710°C. The prograde metamorphic stage is inferred to be amphibolite or eclogite facies metamorphism. Hence, a clockwise a P–T–t path is proposed for the ADMGs. The overall results indicate that ADMGs are ultra-high temperature (UHT) granulites, and the protolith is altered oceanic crust consumed during the Pan-African collisional events. Asthenospheric upwelling induced by lithospheric delamination in the earliest extension of the thickened orogen, or by slab break-off in the background of collision may have provided the additional heat for UHT granulite facies metamorphism.

Changing Carboniferous Arc Magmatism in the Ossa-Morena Zone (Southwest Iberia): Implications for the Variscan Belt

Carboniferous magmatism in southwestern Iberia was continuously active for more than 60 m.y. during the development of the Appalachian-Variscan belt of North America, North Africa and Western-Central Europe. This collisional orogen that records the closure of the Rheic Ocean is essential to understanding the late Paleozoic amalgamation of the Pangea supercontinent. However, the oblique convergence between Laurussia and Gondwana that lasted from the Devonian to the Carboniferous was likely more complex. Recently, a new tectonic model has regarded the Iberia Variscan belt as the site of coeval collisional and accretionary orogenic processes. Early Carboniferous plutonic rocks of southwest Iberia indicate arc magmatism in Gondwana. The Ossa-Morena Zone (OMZ) acted as the upper plate in relation to the geometry of the Paleotethys subduction. This active accretionary-extensional margin was progressively involved in a collisional phase during the Late Carboniferous. Together, the Évora Massif and the Beja Igneous Complex include three successive stages of bimodal magmatism, with a chemical composition indicative of a long-lived subduction process lasting from the Tournaisian to the Moscovian in the OMZ. The earliest stage of arc magmatism includes the Tournaisian Beja and Torrão gabbro-dioritic rocks of the Layered Gabbroic Sequence. We present new geochemical and Nd isotopic and U-Pb geochronological data for magmatic rocks from the Main (Visean-Serpukhovian) and Latest (Bashkirian-Moscovian) stages of arc magmatism. Visean Toca da Moura trachyandesite and rhyolites and Bashkirian Baleizão porphyries and Alcáçovas quartz diorite share enriched, continental-crust like characteristics, as indicated by major and trace elements, mainly suggesting the addition of calc-alkaline magma extracted from various mantle sources in a subduction-related setting (i.e., Paleotethys subduction). New U-Pb zircon geochronology data have allowed us to establish a crystallization age of 317 ± 3 Ma (Bashkirian) for Alcáçovas quartz diorite that confirms a temporal link with Baleizão porphyry. Positive εNd(t) values for the Carboniferous igneous rocks of the Beja Igneous Complex and the Évora gneiss dome indicate production of new juvenile crust, whereas negative εNd(t) values also suggest different grades of magma evolution involving crustal contamination. The production and evolution of Carboniferous continental crust in the OMZ was most likely associated with the development of an active continental margin during the convergence of the Paleotethys Ocean with Gondwana, involving juvenile materials and different grades of crustal contamination.

Cenozoic delamination of the southwestern Yangtze craton owing to densification during subduction and collision

Abstract It is widely thought that oceanic subduction can trigger cratonic keel delamination, but the southwestern Yangtze craton (SYC; southwestern China) lost its lower keel during Cenozoic continental collision. The upper mantle beneath the thinned SYC contains its incompletely delaminated keel, which has high-velocity seismic anomalies. Combining geophysical observations with the geochemistry of Eocene mafic potassic lavas derived from the SYC mantle at different depths, we suggest that the deep (~130 km) delaminated lithosphere was more fertile and dense, with low-forsterite (Fo; molar 100 × Mg/[Mg + Fe] = 91.3) and high-δ18O (5.9‰) olivine, than the shallow (~55 km) intact lithosphere (Fo = 94.2; δ18O = 5.2‰), although both were rehydrated and oxidized. The deep keel underwent strong refertilization and densification owing to the addition of Fe-rich basaltic melts during earlier oceanic subduction. Subduction-driven refertilization and subsequent collision-driven cooling caused cratonic keel delamination due to compositional and thermal densification rather than hydration- or oxidation-induced rheological weakening. Our study provides an example of Cenozoic cratonic keel delamination in a collisional orogen and highlights the key roles of compositional and thermal densification in delamination during subduction and collision.

Petrogenesis of the quartz diorite from the Lietinggang-Leqingla Pb-Zn-Fe-Cu-(Mo) deposit in southern Tibet: Implications for the genesis of a skarn-type polymetallic deposit in the Tibetan-Himalayan collisional orogen

The Lietinggang-Leqingla deposit is a representative skarn-type polymetallic deposit in the eastern of the central Lhasa subterrane. It comprises Pb-Zn and Fe-Cu-(Mo) mineralization that are part of the same metallogenic system. Garnet-skarn hosting Fe-Cu-(Mo) mineralization distributed in the contact zone between the Jubuzhari complex intrusions and carbonate strata of the Mengla Formation. The Pb-Zn mineralization is hosted in distal garnet-pyroxene and pyroxene-actinolite skarns, which formed in the strata of Mengla Formation. Here, we investigate quartz diorites (61.06 ± 0.93 Ma) that are related to Fe-Cu mineralization in the northern part of the mining area. The quartz diorites are characterized by low SiO2 (61.57–65.88 wt%), low K2O (2.53–3.07 wt%), and high total alkali (Na2O + K2O) contents (5.69–6.35 wt%). They are enriched in large-ion lithophile elements and light rare earth elements, but depleted in high field strength elements and heavy rare earth elements. The quartz diorites yield variably low (La/Yb)N ratios (4.29–7.07, the average value is 6.36) with moderately negative Eu anomalies (Eu/Eu* = 0.49–0.72). Furthermore, they exhibit a narrow range in (87Sr/86Sr)i ratios (0.706355–0.706807) and weakly negative εNd (t) (−2.08 to −1.57), and positive εHf (t) (+0.14 to +3.46) values. Based on the geochemical characteristics presented in this study and previously published data, we propose that the ore-forming rocks related to Fe-Cu and Pb-Zn mineralization were formed at the same time. The intermediate intrusions associated with Fe-Cu mineralization were derived from partial melting of lithospheric mantle mixed with the rejuvenated lower crustal melts, after which the mixed magma underwent minor fractional crystallization during upwelling. The felsic intrusions associated with Pb-Zn mineralization were formed by melting of mantle-derived basaltic magmas with old lower crust component contributions and which underwent extensive fractional crystallization.

Building a Young Mountain Range: Insight Into the Growth of the Greater Caucasus Mountains From Detrital Zircon (U‐Th)/He Thermochronology and 10Be Erosion Rates

AbstractThe Greater Caucasus (GC) Mountains within the central Arabia‐Eurasia collision zone are an archetypal example of a young collisional orogen. However, the mechanisms driving rock uplift and forming the topography of the range are controversial, with recent provocative suggestions that uplift of the western GC is strongly influenced by an isostatic response to slab detachment, whereas the eastern half has grown through shortening and crustal thickening. Testing this hypothesis is challenging because records of exhumation rates mostly come from the western GC, where slab detachment may have occurred. To address this data gap, we report 623 new, paired zircon U‐Pb and (U‐Th)/He ages from seven different modern river sediments, spanning a ∼400 km long gap in bedrock thermochronometer data. We synthesize these with prior bedrock thermochronometer data, recent catchment averaged 10Be cosmogenic exhumation rates, topographic analyses, structural observations, and plate reconstructions to evaluate the mechanisms growing the GC topography. We find no evidence of major differences in rates, timing of onset of cooling, or total amounts of exhumation across the possible slab edge, inconsistent with previous suggestions of heterogeneous drivers for exhumation along‐strike. Comparison of exhumation across timescales highlight a potential acceleration, but one that appears to suggest a consistent northward shift of the locus of more rapid exhumation. Integration of these new datasets with simple models of orogenic growth suggest that the gross topography of the GC is explainable with traditional models of accretion, thickening, and uplift and does not require any additional slab‐related mechanisms.