Cheese Production Research Articles

Camembert-Type Cheese with Sweet Buttermilk: The Determination of Quality Properties and Microstructure.

Camembert is a type of surface-mold-ripened soft cheese traditionally produced from cow's milk. Buttermilk, a by-product of butter production with beneficial nutritional and technological properties, is increasingly being used in various applications, including cheesemaking. Therefore, this study aimed to use sweet buttermilk (BM) in combination with milk at concentrations of 10% (w/w) (BM10) and 20% (w/w) (BM20) for the production of Camembert-type cheese. A control cheese made entirely from milk was also produced. The cheese samples underwent a 28-day ripening process during which their composition, acidity, water activity, color, and sensory properties were examined at 1-week intervals. The microstructure of the matured Camembert-type cheese samples was analyzed using scanning electron microscopy (SEM), and their texture was evaluated. The production yield of BM20 cheese (18.03 ± 0.29 kg/100 kg) was lower (p < 0.05) than that of the control (19.92 ± 0.23 kg/100 kg), with BM10 showing the distinctly lowest yield (14.74 ± 0.35 kg/100 kg). The total solid and fat content of BM Camembert-type cheese samples was lower than the control. However, the total protein content in cheese BM20 at the end of the ripening period was the same as that of the control. The changes in acidity in all samples were typical for Camembert cheese, and water activity was high (above 0.92). The sensory properties of all samples were characteristic of the cheese type, while the color of BM cheese samples differed from the control. The microstructure of BM10 and BM20 cheese variants was similar, namely homogenous and less porous compared to the control. In terms of texture, the BM samples had significantly lower hardness, adhesiveness, and gumminess. This study indicates that sweet BM, particularly at a concentration of 20%, may be effectively used in the production of Camembert-type cheese.

Comparison of milk-clotting activity measurement using the Berridge's operator-based approach and a proposed digital method

The milk clotting activity (MCA) analysis of coagulants used in the production of cheese is an important parameter used in the modern dairy industry. The MCA is calculated using the estimated milk-clotting time (MCT). The standard method used for estimation of MCT is presented in the ISO 23058/IDF 199 Standard using the Berridge's operator-based approach. In this paper a new method is presented to estimate the MCT using digital image acquisition and signal processing. The estimate is obtained by processing a sequence of images of the wall of a round bottom flask containing milk and the coagulant. Digital signal processing and filter techniques were used to remove interferences and artifacts and improve the clotting time estimation. A set of 28 samples of milk plus coagulant were processed. The method's accuracy is about 1/30 s and the average relative error, when compared to an experienced human operator, was με = 2.82%, according to the experimental results, with an associated standard deviation of σε = 3.07% and a median of mε = 1.92%. The method may be used to replace the human operator during the MCT estimation procedure.

The impact of seasonal calving systems with varying pasture allowance on Cheddar cheese composition, nutritional quality, and ripening characteristics

The objective of this study was to examine the impact of stage of lactation (early, mid and late) and proportion of pasture in the cows diet (high: GRS, medium: PMR and no: TMR) on the composition and quality of Cheddar cheese. Triplicate trials were carried out in each stage of lactation, and milk protein and fat contents were standardized for Cheddar cheese manufacture at pilot scale. As cheese milks were standardized for milk fat and protein contents, gross composition did not differ as a result of diet. Fatty acid profiles of GRS cheese were significantly different from TMR, while PMR profiles were less distinct and more similar to both GRS and TMR profiles, as illustrated by partial least squares discriminatory analysis. Fatty acids including CLA C18:2 cis-9, trans-11, C22:1 n-9 and C18:3 n-3 were most influential in this separation of profiles. Fatty acid profiling revealed that GRS derived cheese contained higher proportions of nutrients considered beneficial for human health including higher proportions of unsaturated fatty acids and omega-3 fatty acids. A biomarker model utilizing the proportions of 5 fatty acids was constructed and was effective at distinguishing between cheese of GRS, TMR and PMR feeding systems. Proportions of ρ-κ-casein, αs2-casein and αs1-casein in cheese also differed between diets while proportions of ρ-κ-casein, αs1-casein and β-casein were lowest in late lactation cheese. The impact of diet was less influential compared with that of stage of lactation on the ripening characteristics of cheese. An index of primary proteolysis was highest in late lactation cheese. The peptides derived from the proteolysis of κ-casein and β-casein and levels of secondary proteolysis, in particular, the proportions of 12 free amino acids were most influenced by stage of lactation. Overall this study demonstrated the effects of increasing pasture allowance and stage of lactation on the nutritional quality and ripening properties of Cheddar cheese.

Utilization of retentates for white brined cheese production: comparative evaluation of physico-chemical and sensory properties

The aim of the present study is (1) to enhance the protein fraction in cheese milk through membrane filtration and consequently (2) to separate the majority of whey as ‘ideal whey’ prior to the production of white brined cheese, and (3) to explore the potential utilization of retentates in the production of white brined cheese. The chemical, physical, textural and sensory properties of cheeses produced from microfiltration (MF) retentates were characterized to investigate the effects of cross-flow MF on white brined cheese. Polyether sulfone (MP005) membranes featuring a pore diameter of 0.05 μm and polyvinylidene fluoride (MV020) membranes with a pore diameter of 0.20 μm were utilized. The assessed quality parameters of cheeses derived from polyethersulfone membrane (MP005) retentates were similar to the control (p > 0.05), whereas the cheese obtained from polyvinylidene fluoride membrane (MV020) retentates exhibited notable differences (p < 0.05) from the control. The traditional whey generated after cheese-making, which typically requires substantial on-site processing and/or treatment, was reduced by 3.5–6.7 times using the MP005 retentates. Simultaneously, 58–70% of the cheese milk (w/w) was separated as ideal whey before the cheese-making process. MF shows potential as an eco-friendly technology suitable for use in cheese production processes. The potential utilization of MP005 for enriching the protein content in cheese milk holds promise for white cheese production.

Microbiome of craft hard cheeses from raw goat milk during ripening

The production of craft cheeses from goat milk in small farms in Ukraine is becoming increasingly widespread. The uniqueness of goat cheeses made from raw milk is attributed to the significant diversity of microbiological processes that occur during their ripening, involving natural strains of bacteria, fungi, yeasts, and cheese mites. Therefore, this research aimed to determine the microbial composition of Caciotta and Canestrato goat cheeses during their ripening process. The number of mesophilic aerobic and facultative anaerobic microorganisms (MAFAM) in Caciotta cheese was stable on the 10th day, the 1st, and the 12th month, and decreased by 1.18–1.27 lg CFU/g by the 24th month of ripening. The number of mold fungi and yeasts in Caciotta cheese peaked in the 1st month but they were not detected in the 12th and 24th months of ripening. Lactic acid bacteria in Caciotta cheese formed the basis of MAFAM and were represented by Lactobacillus plantarum on the 10th day and the 1st month of ripening, Lactobacillus brevis and Leuconostoc pseudomesenteroides in the 12th month, and L. brevis and Leuconostoc mesenteroides in the 24th month. In 24-month-ripened Caciotta cheese, Escherichia coli, Enterobacter ludwigii, E. durans, E. faecalis, and E. hirae were detected. Lactic acid bacteria in Canestrato cheese formed the basis of MAFAM and were represented by L. mesenteroides from the 10th day to the 3rd month of age, L. pseudomesenteroides in the 6th month, and L. plantarum in the 12th month. Canestrato cheese was characterized by a significant presence of mold fungi and yeasts in all ripening periods except for the 6th month. In 12-month-ripened Canestrato cheese, Enterobacter cloacae, Bacillus cereus, Enterococcus durans, E. hirae, and E. faecalis were isolated. Cheese mites, Acarus siro, in various stages of development were found in the rind of both cheeses starting from the 6th month of ripening. The results of the researchers provide new data on the microbiome of craft hard cheeses made from raw goat milk and can be used to develop methods for controlling the population size of A. siro mites during their ripening.

An Overview: Specificities and Novelties of the Cheeses of the Eastern Mediterranean

The aim of this study is to provide an overview of the specificities (milk characteristics, production process, ripening biochemistry, composition, and sensory properties) and novelties of the world-famous traditional cheeses of the Eastern Mediterranean (EM). The EM area is remarkably heterogeneous (11 countries—Egypt, Israel, Lebanon, Syria, Türkiye, Cyprus, Greece, Albania, Montenegro, Bosnia and Herzegovina, and Croatia) in terms of cheese production, but there are some common features that can be associated with EM which are connected to the difficult geoclimaticconditions (hilly terrain and hot summers). Cheesemakers resort to some preservation methods, such as high salt content (in white-brined cheeses), high total solids content (in hard cheeses), the use of hot water in the treatment of the curd (in pasta filata cheeses), the addition of some local herbs with antimicrobial properties, and the use of animal skin sacks for cheese ripening. Due to the high proportion of whey as a by-product, whey is traditionally used in EM for the production of whey cheeses. Preserving the production of traditional EM cheeses is critical to maintaining their cultural significance and meeting the demand of consumers interested in the provenance, craftsmanship, and nutritional value of these unique products.

Fe3O4@silica-thermolysin: A robust, advantageous, and reusable microbial nanobiocatalyst for proteolysis and milk-clotting

Thermolysin (TLN) is a microbial highly-priced thermostable metallo-endoprotease with complementary substrate specificity to those of proteases widely used in science and industry for protein digestion and milk-clotting. This study is the first to immobilize TLN on aminated superparamagnetic nanoparticles (Fe3O4@silica-NH2) aiming for higher stability, recoverability, reusability, and applicability in proteolysis and as a microbial rennet-like milk-clotting enzyme. The nanobiocatalyst developed (Fe3O4@silica-TLN) displays hydrolytic activity on a synthetic TLN substrate and, apparently, was fully recovered from reaction media by magnetic decantation. More importantly, Fe3O4@silica-TLN retains TLN catalytic properties in the presence of calcium ions even after exposure to 60 °C for 48 h, storage at 4 °C for 80 days and room temperature for 42 days, use in proteolyses, and in milk-clotting for up to 11 cycles. Its proteolytic activity on bovine milk casein in 24 h furnished 84 peptides, of which 29 are potentially bioactive. Also, Fe3O4@silica-TLN catalyzed the digestion of bovine serum albumin. In conclusion, Fe3O4@silica-TLN showed to be a new, less autolytic, thermostable, non-toxic, magnetically-separable, and reusable nanobiocatalyst with highly attractive properties for both science (peptide/protein chemistry and structure, proteomic studies, and the search for new bioactive peptides) and food industry (cheese manufacture).

Biological activities, Peptidomics and in silico analysis of low-fat Cheddar cheese after in vitro digestion: Impact of blending camel and bovine Milk

Cheesemaking with camel milk (CM) presents unique challenges and additional health benefits. This study involved preparing low-fat Cheddar cheese (LFCC) by blending bovine milk (BM) with varying levels of CM. Control cheese was made exclusively with BM. After 180 days of ripening, LFCC samples underwent in vitro digestion to determine antioxidant capacities, α-amylase and α-glucosidase inhibition, and angiotensin-converting enzyme inhibition. The peptide profile of LFCC treatments was analyzed using liquid chromatography-quadrupole-time of flight-mass spectrometry. Antioxidant and biological activities were influenced by BM-CM blends and digestion. At days 120 and 180, the number of αs1-casein-derived peptides increased in all samples except for LFCC made with 15% CM. Generally, 88 peptides exhibited ACE inhibition activity after 120 days of ripening, increasing to 114 by day 180. These findings suggest that ripening time positively affects the health-promoting aspects of functional cheese products.

Exploring a Cheese Ripening Process That Hinders Ochratoxin A Production by Penicillium nordicum and Penicillium verrucosum.

A lack of control of the technological abiotic parameters apparent during cheese manufacture, including temperature and relative humidity, results in this dairy product being prone to mold contamination. Sometimes, inoculant molds are used to obtain the characteristic sensory properties of this type of product. However, during the maturation process, some unwanted molds can colonize the ripening cheese and produce mycotoxins. Mycotoxigenic molds such as Penicillium nordicum and Penicillium verrucosum can colonize ripened cheeses, contaminating them with ochratoxin A (OTA), a nephrotoxic 2B toxin. Thus, the presence of OTA in cheeses could represent a hazard to consumers' health. This study has evaluated the growth and OTA production of P. nordicum and P. verrucosum on a cheese analogue under simulated ripening conditions of 10 and 15 °C and 0.96 water activity (aw). Ecophysiological, molecular, and analytical tools assessed the mold growth, gene expression, and OTA production under these environmental conditions. Both species were able to effectively colonize the cheese under these ripening conditions. However, neither species expressed the otapks and otanps biosynthetic genes or produced phenotypic OTA. Therefore, these results suggest a relatively low risk of exposure to OTA for consumers of this type of cheese product. The conditions used were thus appropriate for cheese ripening to minimize the potential for contamination with such mycotoxins. An appropriate adjustment of the technological ripening parameters during such cheese manufacture could contribute to OTA-free cheeses.

Enhancing Romanian consumers' purchase intention of a new Kashkaval cheese with natural thyme flavor

The modern consumer increasingly prefers those products offering utility that are also healthy, safe, pleasant, and at a convenient price. Kashkavals, made of cow or sheep milk since olden times, pertain to this food category. Kashkavals are a type of semi-hard yellow cheese originally from Balkan countries, such as Albania, Macedonia, Bulgaria, Romania, Kosovo, and Serbia, marked by various aromas, tastes, textures, flavors, and shapes depending on their geographical area. Kashkaval cheese producers are increasingly more interested in finding solutions from the dairy industry to prolong the shelf durability of the product, to improve its flavor and taste characteristics, while reducing the risks impeding product quality due to various types of bacteria and molds. A possible solution to reduce risks is to include essential oils in the milk used to produce Kashkaval cheese. If manufacturing such cheese does not involve significant technological challenges, a producer must identify clients' willingness to choose and purchase a product like Kashkaval cheese with a natural thyme flavor from essential oil.The aim of the research is to study the consumers' purchase intention towards Kashkaval cheese, by relying on the Stimulus-Organism Response model (SOR). Therefore, the authors develop a conceptual model based on the literature. The relations of the conceptual model are then empirically tested among 458 respondents from an emerging market. The conceptual model considers the price, as well as the utilitarian, hedonic, and authentic attributes of the Kashkaval cheese as stimuli, while the uniqueness and image are considered mental processes exerted by the organism. Finally, the impact of stimuli and the organism in generating consumer purchase intention (response) is further analyzed. Data are collected through a quantitative-based survey and later analyzed by using structural equation modeling with SmartPLS. The findings suggest that the purchase intention of Kashkaval cheese depends mainly on its image among consumers and its uniqueness. At the same time, its hedonic and utilitarian characteristics along with price and local/regional character of the thyme-flavored kashkaval decisively determine customer preference.

Usefulness of Moringa oleifera seed extract as Coagulant for the production of fresh camel cheese

The current study aimed to enhance the coagulation properties of camel milk using enzymatic extracts derived from Moringa oleifera seeds. Experiments were conducted to evaluate the clotting activities of Moringa extract on camel milk and compare them with cow milk. Our results regarding the characterisation of the enzymatic extract showed an extraction yield of 54.3±1.8%. The optimum coagulation conditions were determined to be pH 5 and a temperature of 55°C. In addition, the enzymes exhibited substantial clotting activity (2.54 RU) on both camel and cow milk. The cheese samples showed significant oxidative and antibacterial activity.

Pathogenic and Harmful Bacteria in Dairy Technology: Genomic Characterization and Its Correlation with Physicochemical Parameters of Sheep’s Cheese Sold in Southern Brazil

The distinct microbiological and physicochemical characteristics of sheep milk enable the production of cheeses with unique organoleptic properties. The scenario of sheep cheeses in Brazil is still uncertain, lacking data and regulations. This study aims to characterize the diversity of bacterial groups with potential pathogenic and/or harmful properties to milk technology and correlate the presence of these bacteria with the physicochemical properties of sheep cheese. Additionally, it investigates the presence of virulence genes, resistance genes, and toxins in reference genomes. The main steps were (a) sample preparation and fractionation; (b) physicochemical analysis; (c) analysis of the free fatty acids profile by GC-FID; (d) analysis of the volatile compounds profile by GC-MS; (e) molecular analysis—Next Generation Sequencing of the 16S rRNA gene (V3-V4 region); and (f) in silico analysis—Genomics. A total of 1,061,392 sequences were identified, corresponding to 45 genera and 57 species. Of the total abundance, 95.7% were considered beneficial, while 3.9% were classified as bacteria with pathogenic potential (BPP) and/or bacteria harmful to milk technology (BHMT). Five phyla were identified: Firmicutes, Proteobacteria, Actinobacteriota, Bacteroidota, and Fusobacteriota. The genera Acinetobacter, Pseudomonas, and Staphylococcus stood out in the BPP and BHMT groups, showing higher abundance. Alpha diversity of the cheese samples showed that the cheese origin significantly influences the richness, evenness, and abundance of bacterial species. Some physicochemical parameters, fatty acids, and volatile organic compounds showed a negative correlation with Staphylococcus. Reference genomes of two species exhibited a higher number of resistance and virulence genes. This reinforces the need to monitor bacteria considered of lesser relevance to prevent the transmission, through food, of potentially resistant and virulent pathogens.

PHYSICO-CHEMICAL AND SENSORY ASSESSMENTS OF 'WARA' PRECIPITATED USING TWO PLANT EXTRACTS

In order to find alternative plant rennet to the traditional Calotropis procera (CLE) used in cheese production in Nigeria, the physico-chemical and sensory qualities of unripe Carica papaya pulp extract (UCE)and its combination with CLE was investigated. The extracts which formed the treatments were in the following concentrations; 20% CLE alone, 20% UPE alone, 20% CLE + 80% UPE, 15% CLE+ 85% UPE, CLE+ 90% UPE, 5% CLE+95% UPE. The physico-chemical quality showed significant variations in, the fat, moisture and protein contents. The fat content (60.77%) of cheese made from 15% CLE+85%UCE was significantly (P&lt;0.05) higher. There were no significant (P&gt;0.05) difference in the ash content. The protein (24.98%) of cheese precipitated from 20%CLE+80%UPE was significantly (P&lt;0.05) higher. Free fatty acid values was not significantly (P&gt;0.05) different. The peroxide and acid values, % cheese yield differed significantly (P&lt;0.05). The coagulation time (CT) of the cheese were significantly (P&lt;0.05) different with 20%UCE having the highest value (40mins). The cheese pH did not differ (P&gt;0.05) significantly. The sensory evaluation result was not significantly different (P&gt;0.05). These results show that unripe C. papaya extract can serve as suitable alternative and can be combined with C.procera as coagulants in cheese production.

Formulation and Characterization of Lentil Milk–Based Soft Cheese Analogs: Insights on Physicochemical and Textural Properties

ABSTRACTLentil milk–based soft cheese (LBC) is one of the emerging partial substitutes for animal milk‐based cheese. With time, more people want to reduce their meat and dairy intake for ethical, environmental, and chronic health–related concerns. This study focused on the formulation of LBC using milk extracted from green gram (S1 (6.5 g) of proteins), red gram (S2 (5 g) proteins), and black gram (S3 (3.5 g) proteins). All formulated LBC samples were investigated by determining proximate analysis, syneresis, viscosity, texture, color change, storage time, microbial count, and sensory attributes to evaluate the quality during 15 days of storage. The results reported that pH levels decreased for both S1 and S3, while S2 showed an increasing trend from Day 1 to Day 15. Viscosity and syneresis increased from Days 1 to 15 in S1, S2, and S3. Moreover, assessment of storage stability showed significant changes (p &lt; 0.05) in the microbial count for S1 (7.89–4.98 CFU/mL), S2 (2.88–9.68 CFU/mL), and S3 (1.39–7.09 CFU/mL) from Day 1 to Day 15. The puncture force test reported that S1 showed a decreasing trend while S2 and S3 showed an increasing trend. The color attributes also showed a rising trend across all LBC samples. For sensory evaluation, LBC prepared using green gram showed the highest scores, particularly in appearance, texture, and color. Overall findings concluded the potential of lentil milk as a suitable ingredient for plant‐based soft cheese production, offering a new nutritious option for consumers with dietary preferences or restrictions.

Supercritical fluid extrusion of dairy and fruit products to generate GOS-enriched and nutritionally superior snack puffs

The consumption of ultra-processed snacks is often considered unhealthy because such foods generally are energy-dense with low nutritive value. They contain high levels of starch, fat, and sugar and low levels of essential nutrients such as fiber, protein, and bioactive compounds. Nutritionally balanced snack foods that cater to today’s on-the-go lifestyles and do not get in the way of better eating are in high demand. The present study aims to create nutritionally attractive extruded puffs by valorizing food manufacturing byproducts and to elucidate the uniqueness of hybrid extrusion processing and its effect on product quality parameters. Supercritical fluid extrusion (SCFX) was used to transform apple pomace, starch or dairy ingredient-based formulations into value-added products in a zero-waste system. Acid whey, a byproduct of yogurt and cheese manufacturing, was used in lieu of water in the extruder to mitigate environmental issues related to its disposal. The SCFX system was also used for in-process polymerization of galactose, sourced from lactose hydrolyzed skim milk powder (LHSMP), with lactose from milk protein concentrate (MPC) and acid whey sources to produce galacto-oligosaccharides (GOS), a prebiotic associated with various health benefits and making the product acceptable to lactose intolerant consumers. Analysis of the extruded puffs showed that a combination of pomace and dairy ingredients significantly improved the nutritional profile of the product, notably increasing the fiber (5.0 g/30 g serving), protein (13.6 g/30 g serving), bioactive compounds (phenolics 21.4 mg GAE/30 g and vitamin C 0.3 mg/30 g serving), minerals, and GOS (0.4 g/30 g serving) contents. A sensory acceptance test (n=91) showed that incorporation of fruit and dairy by-products in snacks either improved or maintained Just About Right (JAR) scores compared to Market Keto puffs. Overall, utilizing fruit pomace and acid whey in extruded products made by SCFX is not only able to generate nutritious and functional snacks with balanced nutrients profile, derived from inexpensive agro-food by-products feedstock, but also can help mitigate environmental and waste issues.

Occurrence of aflatoxin M1 in cheese products commonly available in Sri Lankan market

Aflatoxins (AFs) are a group of mycotoxins produced by certain fungi of Aspergillus spp. AFs of major concern are B1 (AFB1), B2 (AFB2), G1 (AFG1), G2 (AFG2), and M1 (AFM1). AFM1 is a hydroxylated metabolite of AFB1 formed inside the animal's body which is excreted into milk of cows that consumed AFB1 contaminated feed. Consumption of AFM1-contaminated milk and subsequent dairy products causes negative health effects in consumers. This study was conducted to determine the occurrence and levels of AFM1 in cheese products available in the Sri Lankan market where AFM1 is not regularly monitored in milk while having an outdated regulatory limit of 1 ppb established for dairy products. Processed cheese (n = 28), hard cheese (n = 14), semi-hard cheese (n = 5), and soft cheese (n = 3) representing seven popular brands were collected. The samples were analyzed by Ultra High-Performance Liquid Chromatography Fluorescence Detection. AFM1 was detected in 40 samples (80 %), while 17 (34 %) and 37 (74 %) of the samples had AFM1 levels exceeding the maximum permitted limit set by Codex Alimentarius Commission (0.5 ppb) and the Netherlands (0.2 ppb). Further, 10 samples violated the Sri Lankan maximum limit of 1 ppb. Thirteen out of the 14 hard cheese (92.9 %, 0.11–14.43 ppb) and all semi-hard cheese samples (100 %, 0.29–0.65 ppb) contained AFM1. Most of the soft (66.7 %, 0.35–0.45 ppb) and processed (71.4 %, 0.11–1.35 ppb) cheese samples had AFM1. Most of the locally manufactured cheese products in Sri Lankan market may pose health risks to consumers. The results highlight the significance of regular monitoring of AFM1 in dairy products and the importance of updating regulations on par with international standards concurrently to ensure consumer safety.

Optimal management plans and initiatives for the valorization and safeguarding of local breeds: a mathematical programming approach

In this study, a parametric programming model was developed in order to deliver optimal management plans for various types of farms rearing endangered Greek sheep breeds under three distinct scenarios. The first scenario investigated the optimal internal organization of farms (i.e., management practices and resource allocation strategies that increase profitability of farms) under current market conditions (e.g., product prices) without, however, considering subsidies and compensations. The second assessed the impact of an agri-environmental support scheme on farm optimal structure and socioeconomic performance. The third investigated the effects of integrating farms into value chains and niche markets where premium prices prevail. For this purpose, a questionnaire survey was conducted in the wider region of Epirus and Thessaly, collecting management data from 16 farms rearing (i) Kalaritiko, (ii) Orino Epiru and (iii) Katsika rare sheep breeds. The main finding of this study was that the optimal internal organization of farms is essential for their self-reliance and viability. Therefore, it should be the basis in the designing of any initiative aimed at the preservation and valorization of local breeds. Furthermore, the analysis showed that a niche marketing strategy (i.e., a premium price strategy) can have a broader positive impact on farms structure and socioeconomic performance, particularly those engaged in cheese production, compared to an agri-environmental scheme. However, due to the fact that both initiatives possess limitations that may render them inefficient under specific external conditions, the development of an integrated incentive mechanism, which will combine both policy schemes and market-based initiatives, appeared to be a more effective strategy for the long-term viability of farms.

The use of cheese whey powder in the cultivation of protein-rich filamentous fungal biomass for sustainable food production

Cheese whey is an industrial by-product that is generated in excess during the cheese production process in the dairy industry. Despite the potential utility of whey, it continues to pose environmental threats in the industry. This study comprehensively evaluates the utilization of two fermentation techniques (solid-state fermentation and submerged fermentation) for producing fungal biomass from cheese whey powder, employing Aspergillus oryzae, Rhizopus oryzae, and Neurospora intermedia for sustainable food production. It has been observed that submerged fermentation is more effective in increasing the protein content of whey powder compared to solid-state fermentation. The highest biomass yield was achieved with A. oryzae (5.29 g/L, 0.176 g biomass/g substrate), followed by N. intermedia (3.63 g/L, 0.121 g biomass/g substrate), and R. oryzae (1.9 g/L, 0.063 g biomass/g substrate). In the bubble column reactor, the protein content of the substrate (78.65 g/kg) increased by 165.54 and 176.69% with A. oryzae (208.85 g/kg) and N. intermedia (217.62 g/kg), respectively. This study has demonstrated that whey powder can be converted into protein-rich biomass through fungal bioconversion. The obtained biomass has the potential to be developed as an alternative food and feed source, contributing to waste management and sustainable food production.

Application of Ligilactobacillus salivarius SP36, a Strain Isolated from an Old Cheese Seal, as an Adjunct Culture in Cheesemaking.

Adjunct cultures originating from artisanal cheese environments may play an important role in recreating and developing traditional cheese flavours, thanks to their enzymatic activities, involved in different metabolic pathways that occur during cheese ripening. In this work, Ligilactobacillus salivarius SP36, a strain isolated from an old cheese seal, was added as an adjunct culture to the cheese's raw milk, and its effect on the microbiological, physical-chemical and sensory characteristics of the cheese was studied. The use of L. salivarius SP36 in cheese manufacturing had no significant (p > 0.05) effect on the cheese microbiota, gross composition (fat percentage, protein, total solids, moisture and NaCl concentration), colour or texture of the cheese. However, L. salivarius SP36 increased (p < 0.01) the formation of 25 volatile compounds, including 10 esters, 1 aldehyde, 8 alcohols and 6 carboxylic acids. In addition, cheeses made with L. salivarius SP36 received higher scores (p < 0.01) for aroma intensity and quality than control cheeses. L. salivarius SP36 proved to be a good candidate as an adjunct culture for cheesemaking, since it improved the cheese flavour by making it more intense and recovering typical sensorial notes of traditional cheeses.

Influence of Cheese Composition on Aroma Content, Release, and Perception.

The quality of a cheese is determined by the balance of aroma compounds primarily produced by microorganisms during the transformation of milk into ripened cheese. The microorganisms, along with the technological parameters used in cheese production, influence aroma formation. The perception of these compounds is further influenced by the composition and structure of the cheese. This study aimed to characterize how cheese composition affects aroma compound production, release, and perception. Sixteen cheeses were produced under controlled conditions, followed by a quantitative descriptive analysis post ripening. Aroma composition was analyzed using HS-SPME-GC-MS, and a dynamic sensory evaluation (TCATA) was combined with nosespace analysis using PTR-ToF-MS. Image analysis was also conducted to characterize cheese structure. Cheese fat and whey lactose contents were identified as key factors in the variability of sensory attributes. GC-MS analyses identified 27 compounds correlated with sensory attributes. In terms of aroma compound release, 23 ions were monitored, with fat, salt, and lactose levels significantly affecting the release of most compounds. Therefore, cheese fat, salt, and whey lactose levels, as well as the types of microbial strains, play a role in influencing the composition, structure, release of aroma compounds, and sensory perception.