Centrifugal Microfluidics Research Articles

Ultrafast Evolution of Bacterial Antimicrobial Resistance by Picoliter-Scale Centrifugal Microfluidics.

Experimental evolution is a powerful approach for scrutinizing and dissecting the development of antimicrobial resistance; nevertheless, it typically demands an extended duration to detect evolutionary changes. Here, a centrifugal microfluidics system is designed to accelerate the process. Through a simple step of on-chip centrifugation, a highly condensed bacterial matrix of ∼1012 cells/mL at the enrichment tip of the chip channel is derived, enabling bacteria encapsulated to survive in antimicrobial concentrations several times higher than the minimum inhibitory concentration (MIC) and rapidly develop resistance in the first 10 h. After 48 h of on-chip evolution, the E. coli strain demonstrated a 64 to 128-fold reduction in sensitivity to disinfectants (triclosan) as well as antibiotics (ciprofloxacin and amikacin), a rate substantially swifter compared to conventional continuous inoculation-based experimental evolution. The speed and simplicity of this microfluidic system suggest its broad application for uncovering resistance mechanisms and identifying targets of biocides and antibiotics.

Smartphone-driven centrifugal microfluidics for diagnostics in resource limited settings

The broad availability of smartphones has provided new opportunities to develop less expensive, portable, and integrated point-of-care (POC) platforms. Here, a platform that consists of three main components is introduced: a portable housing, a centrifugal microfluidic disc, and a mobile phone. The mobile phone supplies the electrical power and serves as an analysing system. The low-cost housing made from cardboard serves as a platform to conduct tests. The electrical energy stored in mobile phones was demonstrated to be adequate for spinning a centrifugal disc up to 3000 revolutions per minute (RPM), a rotation speed suitable for majority of centrifugal microfluidics-based assays. For controlling the rotational speed, a combination of magnetic and acoustic tachometry using embedded sensors of the mobile phone was used. Experimentally, the smartphone-based tachometry was proven to be comparable with a standard laser-based tachometer. As a proof of concept, two applications were demonstrated using the portable platform: a colorimetric sandwich immunoassay to detect interleukin-2 (IL-2) having a limit of detection (LOD) of 65.17 ng/mL and a fully automated measurement of hematocrit level integrating blood-plasma separation, imaging, and image analysis that takes less than 5 mins to complete. The low-cost platform weighing less than 150 g and operated by a mobile phone has the potential to meet the REASSURED criteria for advanced diagnostics in resource limited settings.

SERS-integrated centrifugal microfluidic platform for the detection and quantification of Chemical Warfare Agents in single-component solution and mixtures

Chemical Warfare Agents (CWAs) are toxic chemicals. Among CWAs, nerve agents are lethal compounds at low concentrations, and, thus, there is the need to detect and quantify the danger. The combination of Surface-Enhanced Raman Spectroscopy (SERS) with centrifugal microfluidic (CM) systems is a possibility for a safer handling and a fast analysis of nerve agents.In this work, the SERS signal from single-component solutions and mixtures of Tabun (GA) and VX were analyzed with Au-capped silicon nanopillar (NP) SERS substrates integrated on a CM platform and recorded with a custom-built Raman System (RS). Univariate and multivariate analysis methods were applied for the quantification. Both GA and VX were detected and quantified individually with Partial Least Squares regression (PLSR) models, with LoD and LoQ values of 7.39 ppm and 22.17 ppm respectively for GA, and 7.13 ppm and 21.39 ppm for VX. Detection and quantification of GA and VX in mixtures was achieved with Supported Vector Machine (SVM), obtaining R2 of the prediction 0.87 and 0.95, respectively.The results obtained show the potential of the SERS-integrated CM platform combined with machine learning analysis as a reliable method for CWAs on-site detection and quantification and for national security applications in real-case scenarios.

CHAMP: A Centrifugal Microfluidics-Based CRISPR/Cas12b-Combined Real-Time LAMP One-Pot Method for Mycoplasma pneumoniae Infection Diagnosis.

The Mycoplasma pneumoniae outbreak poses health risks to community residents. However, it still has limitations for current clinical diagnostic methods (qPCR nucleic acid assay or IgM immunoassay), including specialized handling, expensive equipment, prolonged turnaround time, and false positives and negatives, highlighting the need to improve clinical diagnostic methods. Herein, we present a novel centrifugal microfluidics-based method for rapidly diagnosing M. pneumoniae infections (CHAMP system). This user-friendly method combines CRISPR/Cas12b and real-time loop-mediated isothermal amplification (LAMP) in a one-pot reaction, offering high sensitivity, specificity, and simplicity for methodology. By adding fully automated nucleic acid magnetic bead-extracted samples to a prepackaged centrifugal microfluidics chip, 48 samples can be automated tested simultaneously within 15 to 60 min at 60 °C. 427 clinical nasopharyngeal swab specimens were used for validation, demonstrating good positive and negative predictive values and good diagnostic sensitivity, specificity, and significant time savings. This method is particularly suitable for detecting low nucleic acid copies of M. pneumoniae samples.

Solid-phase extraction coupled to automated centrifugal microfluidics SERS: Improving quantification of therapeutic drugs in human serum

Surface-enhanced Raman spectroscopy (SERS) is a powerful method in analytical chemistry, but its application in real-life medical settings has been limited due to technical challenges. In this work, we introduce an innovative approach that is meant to advance the automation of microfluidics SERS to improve reproducibility and label-free quantification of two widely used therapeutic drugs, methotrexate (MTX) and lamotrigine (LTG), in human serum. Our methodology involves a miniaturized solid-phase extraction (μ-SPE) method coupled to a centrifugal microfluidics disc with incorporated SERS substrates (CD-SERS). The CD-SERS platform enables simultaneous controlled sample wetting and accurate SERS mapping. Together with the assay we implemented a machine learning method based on Partial Least Squares Regression (PLSR) for robust data analysis and drug quantification. The results indicate that combining μ-SPE with CD-SERS (μ-SPE to CD-SERS) led to a substantial improvement in the signal-to-noise ratio compared to combining CD-SERS with ultrafiltration or protein precipitation. The PLSR model enabled us to obtain the limit of detection and quantification for MTX as 2.90 and 8.92 μM, respectively, and for LTG as 10.76 and 32.29 μM. We also validated our μ-SPE to CD-SERS method for MTX against HPLC and immunoassay (p-value <0.05), using patient samples undergoing MTX therapy. In addition, we achieved a satisfactory recovery rate (80%) for LTG when quantifying it in patient samples. Our results show the potential of this newly developed approach as a strategy for therapeutic drugs in point-of-care clinical settings and highlight the benefits of automating label-free SERS assays.

Centrifugal Microfluidic Cell Culture Platform for Physiologically Relevant Virus Infection Studies: A Case Study with HSV-1 Infection of Periodontal Cells.

Static well plates remain the gold standard to study viral infections in vitro, but they cannot accurately mimic dynamic viral infections as they occur in the human body. Therefore, we established a dynamic cell culture platform, based on centrifugal microfluidics, to study viral infections in perfusion. To do so, we used human primary periodontal dental ligament (PDL) cells and herpes simplex virus-1 (HSV-1) as a case study. By microscopy, we confirmed that the PDL cells efficiently attached and grew in the chip. Successful dynamic viral infection of perfused PDL cells was monitored using fluorescent imaging and RT-qPCR-based experiments. Remarkably, viral infection in flow resulted in a gradient of HSV-1-infected cells gradually decreasing from the cell culture chamber entrance towards its end. The perfusion of acyclovir in the chip prevented HSV-1 spreading, demonstrating the usefulness of such a platform for monitoring the effects of antiviral drugs. In addition, the innate antiviral response of PDL cells, measured by interferon gene expression, increased significantly over time in conventional static conditions compared to the perfusion model. These results provide evidence suggesting that dynamic viral infections differ from conventional static infections, which highlights the need for more physiologically relevant in vitro models to study viral infections.

Flipping: A Valve-Free Strategy to Control Fluid Flow in Centrifugal Microfluidic Systems

Centrifugal microfluidics has emerged as a technology to automate fluid handling at the microliter scale in bioassays. It has been mostly developed for point-of-care diagnostic applications, where assays involve a well-defined workflow. By contrast, this study introduces a microfluidic strategy that allows multiple workflows within the same device, thereby addressing the requirements of sample preparation steps in R&D settings. The corresponding device is a microfluidic chip that can be inserted either in a lab-on-a-disk or in the swinging-bucket of a commercial centrifuge. The control of liquid transfers from one chamber to the next is achieved by flipping the chip, thereby reorienting it in the centrifugal force field. The present experimental study describes the fluid instability that triggers the transfer upon flipping. A semi-empirical physical model is developed that predicts the acceleration threshold of the instability as a function of design parameters. By contrast to most existing control strategies in centrifugal microfluidics, the present strategy does not involve any valve. Consequently, it is robust to variations of material and sample properties, and it yields minimal fabrication constraints. Designing appropriately sized chambers enables flexible implementation of complex workflows. This strategy brings the miniaturization benefits of centrifugal microfluidics to sample preparation workflows.

Lab on a bead with oscillatory centrifugal microfluidics for fast and complete mixing enables fast and accurate biomedical assays

Rapid mixing and precise timing are key for accurate biomedical assay measurement, particularly when the result is determined as the rate of a reaction: for example rapid immunoassay in which the amount of captured target is kinetically determined; determination of the concentration of an enzyme or enzyme substrate; or as the final stage in any procedure that involves a capture reagent when an enzyme reaction is used as the indicator. Rapid mixing and precise timing are however difficult to achieve in point-of-care devices designed for small sample volumes and fast time to result. By using centrifugal microfluidics and transposing the reaction surface from a chamber to a single mm-scale bead we demonstrate an elegant and easily manufacturable solution. Reagents (which may be, for example, an enzyme, enzyme substrate, antibody or antigen) are immobilised on the surface of a single small bead (typically 1–2 mm in diameter) contained in a cylindrical reaction chamber subjected to periodically changing rotational accelerations which promote both mixing and uniform mass-transfer to the bead surface. The gradient of Euler force across the chamber resulting from rotational acceleration of the disc, dΩdisc/dt, drives circulation of fluid in the chamber. Oscillation of Euler force by oscillation of rotational acceleration with period, T, less than that of the hydrodynamic relaxation time of the fluid, folds the fluid streamlines. Movement of the bead in response to the fluid and the changing rotational acceleration provides a dynamically changing chamber shape, further folding and expanding the fluid. Bead rotation and translation driven by fluid flow and disc motion give uniformity of reaction over the surface. Critical parameters for mixing and reaction uniformity are the ratio of chamber radius to bead radius, rchamber/rbead, and the product Trchamber(dΩdisc/dt), of oscillation period and Euler force gradient across the fluid. We illustrate application of the concept using the reaction of horse radish peroxidase (HRP) immobilised on the bead surface with its substrate tetramethylbenzidine (TMB) in solution. Acceleration from rest to break a hydrophobic valve provided precise timing for TMB contact with the bead. Solution uniformity from reaction on the surface of the bead in volumes 20–50 uL was obtained in times of 2.5 s or less. Accurate measurement of the amount of surface-bound HRP by model fitting to the measured kinetics of colour development at 10 s intervals is demonstrated.

Automated sample preparation for electrospray ionization mass spectrometry based on CLOCK-controlled autonomous centrifugal microfluidics

We report a centrifugal microfluidic device that automatically performs sample preparation under steady-state rotation for clinical applications using mass spectrometry. The autonomous microfluidic device was designed for the control of liquid operation on centrifugal hydrokinetics (CLOCK) paradigm. The reported device was highly stable, with less than 7% variation with respect to the time of each unit operation (sample extraction, mixing, and supernatant extraction) in the preparation process. An agitation mechanism with bubbling was used to mix the sample and organic solvent in this device. We confirmed that the device effectively removed the protein aggregates from the sample, and the performance was comparable to those of conventional manual sample preparation procedures that use high-speed centrifugation. In addition, probe electrospray ionization mass spectrometry (PESI-MS) was performed to compare the device-treated and manually treated samples. The obtained PESI-MS spectra were analyzed by partial least squares discriminant analysis, and the preparation capability of the device was found to be equivalent to that of the conventional method.

Fully integrated and automated centrifugal microfluidic chip for point-of-care multiplexed molecular diagnostics

Public health events caused by pathogens have imposed significant economic and societal burdens. However, conventional methods still face challenges including complex operations, the need for trained operators, and sophisticated instruments. Here, we proposed a fully integrated and automated centrifugal microfluidic chip, also termed IACMC, for point-of-care multiplexed molecular diagnostics by harnessing the advantages of active and passive valves. The IACMC incorporates multiple essential components including a pneumatic balance module for sequential release of multiple reagents, a pneumatic centrifugation-assisted module for on-demand solution release, an on-chip silicon membrane module for nucleic acid extraction, a Coriolis force-mediated fluid switching module, and an amplification module. Numerical simulation and visual validation were employed to iterate and optimize the chip's structure. Upon sample loading, the chip automatically executes the entire process of bacterial sample lysis, nucleic acid capture, elution quantification, and isothermal LAMP amplification. By optimizing crucial parameters including centrifugation speed, direction of rotation, and silicone membrane thickness, the chip achieves exceptional sensitivity (twenty-five Salmonella or forty Escherichia coli) and specificity in detecting Escherichia coli and Salmonella within 40 min. The development of IACMC will drive advancements in centrifugal microfluidics for point-of-care testing and holds potential for broader applications in precision medicine including high-throughput biochemical analysis immune diagnostics, and drug susceptibility testing.

Fast and on-site animal species identification in processed meat via centrifugal microfluidics and isothermal amplification.

We present a novel centrifugal microfluidic approach to rapidly identify animal species in meat products. The workflow requires a centrifugal cartridge for DNA extraction and for preparation of a recombinant polymerase amplification (RPA) reaction, a programmable centrifuge for processing the cartridge and an isothermal reader to perform the RPA. Liquid reagents are pre-stored on the cartridge and the meat sample can be added directly without any pre-treatment. With this system, we are able to identify six different animal species in a single run within one hour. In pork salami containing horse, turkey, sheep, chicken and beef meat, it was possible to identify species levels as low as 0.01%. In beef salami and cooked pork sausages 0.1% of foreign meat could be detected. This novel workflow enables rapid and sensitive species identification in processed meat at the point of need.

Two-stage tuberculosis diagnostics: combining centrifugal microfluidics to detect TB infection and Inh and Rif resistance at the point of care with subsequent antibiotic resistance profiling by targeted NGS.

Globally, tuberculosis (TB) remains the deadliest bacterial infectious disease, and spreading antibiotic resistances is the biggest challenge for combatting the disease. Rapid and comprehensive diagnostics including drug susceptibility testing (DST) would assure early treatment, reduction of morbidity and the interruption of transmission chains. To date, rapid genetic resistance testing addresses only one to four drug groups while complete DST is done phenotypically and takes several weeks. To overcome these limitations, we developed a two-stage workflow for rapid TB diagnostics including DST from a single sputum sample that can be completed within three days. The first stage is qPCR detection of M. tuberculosis complex (MTBC) including antibiotic resistance testing against the first-line antibiotics, isoniazid (Inh) and rifampicin (Rif). The test is automated by centrifugal microfluidics and designed for point of care (PoC). Furthermore, enriched MTBC DNA is provided in a detachable sample tube to enable the second stage: if the PCR detects MTBC and resistance to either Inh or Rif, the MTBC DNA is shipped to specialized facilities and analyzed by targeted next generation sequencing (tNGS) to assess the complete resistance profile. Proof-of-concept testing of the PoC test revealed an analytical sensitivity of 44.2 CFU ml-1, a diagnostic sensitivity of 96%, and a diagnostic specificity of 100% for MTBC detection. Coupled tNGS successfully provided resistance profiles, demonstrated for samples from 17 patients. To the best of our knowledge, the presented combination of PoC qPCR with tNGS allows for the fastest comprehensive TB diagnostics comprising decentralized pathogen detection with subsequent resistance profiling in a facility specialized in tNGS.

Multiple on-line active valves based centrifugal microfluidics for dynamic solid-phase enrichment and purification of viral nucleic acid.

Point of care testing (POCT) of nucleic acids holds significant importance in the realm of infectious disease prevention and control, as well as the advancement of personalized precision medicine. Nevertheless, conventional nucleic acid testing methods continue to face challenges such as prolonged detection times and dependence on extensive specialized equipment and personnel, rendering them unsuitable for point of care applications. Here, we proposed an innovative active centrifugal microfluidic system (ACMS) for automatic nucleic acid extraction, encompassing modules for active valve control and magnetic control. An on-chip centrifugal puncture valve (PV) was devised based on the elastic tolerance differences between silicone membranes and tinfoils to release pre-embedded liquid reagents on demand. Furthermore, we have utilized the returnable valve (RV) technology to accurately control the retention and release of liquids, leveraging the high elastic tolerance of the silicone membrane. By incorporating an online controllable magnetic valve, we have achieved controlled and rapid aggregation and dispersion of magnetic beads. The final chip encapsulates multiple reagents and magnetic beads necessary for nucleic acid extraction. Upon sample addition and loading into the instrument, automated on-chip sample loading and nucleic acid extraction, purification, and collection can be accomplished within 30 minutes, halving the overall operation time and even increasing the efficiency of pseudovirus extraction by three orders of magnitude. Consequently, real-time fluorescence quantitative PCR amplification has successfully detected multiple targets of the SARS-CoV-2 virus (with an impressive detection limit as low as 10 copies per μL), along with targeted sequencing analysis yielding a conformity rate of 99%.

Designing a novel paper-based microfluidic disc for rapid and simultaneous determination of multiple nutrient salts in water.

In the face of worsening water quality and escalating water environmental emergencies, this study developed a paper-based microfluidic disk for rapid, on-site determination of ammonia nitrogen, nitrates, nitrites, and phosphates in water. The method utilizes centrifugal microfluidics and paper-based technology, thus simplifying the operation while eliminating the need for on-site reagent preparation. Experimental results demonstrate that the disk requires only 80 microliters of a water sample and 2 minutes to complete the quantitative analysis of the four nutrients, with a coefficient of variation below 1.72% and spike recoveries ranging from 92% to 113%. The development of the disk provides an effective and rapid, on-site testing tool for water quality analysis.

Fully Automated Multiple Standard Addition on a Centrifugal Microfluidic System.

We herein describe a novel centrifugal microfluidic system to achieve multiple standard additions, which could minimize the effects of matrix interference and consequently lead to more accurate and reliable measurements of analyte concentrations in complex samples. The system leverages laser-irradiated ferrowax microvalves to automatically control fluid transfer on the disc without the need for external pumps or pressure systems, simplifying the procedures and eliminating the need for manual intervention. The disc incorporates metering chambers with rationally designed varying sizes, which could lead to the formation of six standard addition samples very rapidly in just 2.5 min. The final solutions are designed to contain a target component at gradually increasing concentrations but have an equal final volume containing the same amount of an analyte solution, thereby equalizing the matrix effect that is supposedly caused by the unknown components in the analyte solution. By utilizing this design principle, we were able to successfully quantify a model target component, salivary thiocyanate ions, that could be used as a biomarker for exposure to tobacco smoke. Our centrifugal microfluidic system holds great promise as a powerful analytical tool to achieve fully automated diagnostic microsystems involving a standard addition process.

An integrated centrifugal microfluidic strategy for point-of-care complete blood counting

Centrifugal microfluidics holds the potential to revolutionize point-of-care (POC) testing by simplifying laboratory tests through automating fluid and cell manipulation within microfluidic channels. This technology can facilitate blood testing, the most frequent clinical test, at the POC. However, an integrated centrifugal microfluidic device for complete blood counting (CBC) has not yet been fully realized. To address this, we propose an integrated portable system comprising a centrifuge and a hybrid microfluidic disc specifically designed for CBC analysis at the POC. The disc enables the implementation of various spin profiles in different stages of CBC to facilitate in-situ cell separation, solution metering and mixing, and differential cell counting. Furthermore, our system is coupled with a custom script that automates the process and ensures precise quantification of cells using light and fluorescent images captured from the detection chamber of the disc. We demonstrate a close correlation between the proposed method and the hematology analyzer, considered the gold standard, for quantifying hematocrit (R2 = 0.99), white blood cell count (R2 = 0.98), white blood cell differential count (granulocyte/agranulocyte; R2 = 0.89), red blood cell count (R2 = 0.97), and mean corpuscular volume (R2 = 0.94). The integration of our portable system offers significant advantages, enabling more accessible and affordable CBC testing at the POC. Considering the simplicity, affordability (∼$250 capital cost and <$2 operational cost per test), as well as low power consumption (>100 tests using a typical 24 V/10 Ah battery), this system has the potential to enhance healthcare delivery, particularly in resource-limited settings and remote areas where access to traditional laboratory facilities is limited.

RT-RPA-assisted CRISPR/Cas12a for rapid and multiplex detection of respiratory infectious viruses based on centrifugal microfluidics

Clustered regularly interspaced short palindromic repeats (CRISPR)-based nucleic acid detection technology combined with recombinase polymerase amplification (RPA) allows for convenient, rapid, and highly sensitive nucleic acid detection. However, the non-specific cleavage characteristics of Cas12a after activation during the CRISPR nucleic acid detection process limit the detection of multiple targets. In this study, we designed a pressure-assisted and centrifugal-driven microfluidic chip for detecting respiratory pathogens. This chip achieved a high-sensitivity detection of 14 targets within 30 min. By freeze-drying, the detection reagents can be stored in the natural environment for one week and then stored at low temperature with little influence on biological activity, which reduces the difficulty of storage and transportation. The chip had independent amplification chambers to avoid competitive reactions, separating the amplification and detection chambers prevented mutual interference between the RPA and the CRISPR detection processes. Thus, this design exhibited a sensitivity of 2 copies/μL and 14 targets nucleic acids can be detected simultaneously. Compared with real-time fluorescence quantitative polymerase chain reaction (PCR) using real clinical samples of SARS-CoV-2, the new method could accurately detect the SARS-CoV-2 virus and identify the virus subtypes, which is important for infectious disease prevention and control.

Automated solid phase DNA extraction on a lab-on-a-disc with two-degrees of freedom instrumentation

BackgroundLab-on-a-disc (LoaD) technology has emerged as a transformative approach for point-of-care diagnostics and high-throughput testing. The promise of integrating multiple laboratory functions onto a single integrated platform has significant implications for healthcare, especially in resource-limited settings. However, one of the primary challenges faced in the design and manufacture of LoaD devices is the integration of effective valving mechanisms. These valves are essential for fluid control and routing, but their intricacy often leads to complexities in design and increased vulnerability to failure. This emphasizes the need for improved designs and manufacturing processes without complex, integrated valving mechanisms. (96) ResultsWe describe a fully automated biological workflow and reagent actuation on a LoaD device without an integrated valving system. The Two Degrees-of-Freedom (2DoF) custom centrifuge alters the centre of rotation, facilitating fluid flow direction changes on the microfluidic platform through a custom programmed interface. A novel 360-degree fluid manipulation approach via secondary planetary gear motion enabled sequential assay reagent actuation without embedded valve triggering, with the addition of infinite incubation times and efficient use of platform realty. The simplified LoaD platform uses clever design, with intermediate flow chambers to avoid cross contamination between reagent steps. Notably, the optimized LoaD platform demonstrated a two-fold DNA yield at higher HEK-293 cell concentrations compared to commercially available spin-column kits. This significantly simplified LoaD platform successfully automated a common, complex workflow without inhibiting DNA purification. (129) SignificanceThis system exhibits the clever coupling of both 2DoF and centrifugal microfluidics to create an autonomous testing package capable of eradicating the need for complex valving systems to automate biological workflows on LoaDs. This automated system has outperformed commercially available DNA extraction kits for higher cell counts. The platform's elimination of valve requirements ensures unlimited sample incubation times and enhances reliability, making it a straightforward option for automated biological workflows, particularly in diagnostics. (73)

Molecular Recognition Mechanism of an Anti-Amatoxins mAb and Its Application in Centrifugal Disk-Based Immunoassay.

Amatoxins are polypeptides that cause 90% of fatalities from accidental ingestion of poisonous mushrooms. Unfortunately, there are no specific antidotes against amatoxins poisoning, hence preparation of high-affinity antibodies, understanding the receptor (amatoxins) and ligand (antibody) mechanism, and establishing a straightforward screening approach are of great significance for confirming poison agents and clinical diagnosis. Here, anti-amatoxins monoclonal antibody (mAb) 9B2 was prepared and the recognition mechanism was investigated. The approach is useful for designing desirable immunogens, developing new antibodies with improved performance, and constructing effective immunoassays. Based on the mAb, we designed a centrifugal disk-like microfluidics chip and developed a fully automated immunoassay capable of detecting amatoxins poisoning in various samples including serum, urine, and mushrooms. The whole detection process could be automatically accomplished within 30 min, with a limit of detection of 0.08 to 0.12 μg/L for real samples, ∼30-fold more sensitive than conventional enzyme-linked immunosorbent assay (ELISA). Our platform not only provided a practical approach for performing poison agent confirmation and clinical diagnosis but also had important implications for improving the survival of patients with mushroom poisoning.

Centrifugal Microfluidic Synthesis of Nickel Sesquioxide Nanoparticles.

Nickel sesquioxide (Ni2O3) nanoparticles were synthesized using centrifugal microfluidics in the present study. The obtained nanoparticles were characterized using SEM to investigate their morphology and microstructure, and XRD was employed to analyze their purity. The nanoparticle size data were measured and analyzed using ImageJ (v1.8.0) software. The flow process and mixing procedure were monitored through computational fluid dynamics simulation. Among the synthesized Ni2O3 nanoparticles, those obtained at the rotation speed of 1000 rpm for 10 min with angular acceleration of 4.2 rad/s2 showed the best performance in terms of high purity, complete shape and microstructure, small diameter, and narrow diameter distribution. The experimental results demonstrate that the rotation speed of the microfluidic chip and reaction time contribute to a decrease in particle diameter and a narrower diameter distribution range. In contrast, an increase in acceleration of the rotation speed leads to an expanded nanoparticle size range and, thus, a wider distribution. These findings contribute to a comprehensive understanding of the effects exerted by various factors in centrifugal microfluidics and will provide new insights into nanoparticle synthesis using centrifugal microfluidic technology.