Cell Adhesion Sequence Research Articles

Effects of Cell-Adhesive Ligand Presentation on Pentapeptide Supramolecular Assembly and Gelation: Simulations and Experiments

The extracellular matrix (ECM) is a complex, hierarchical material containing structural and bioactive components. This complexity makes decoupling the effects of biomechanical properties and cell-matrix interactions difficult, especially when studying cellular processes in a 3D environment. Matrix mechanics and cell adhesion are both known regulators of specific cellular processes such as stem cell proliferation and differentiation. However, more information is required about how such variables impact various neural lineages that could, upon transplantation, therapeutically improve neural function after a central nervous system injury or disease. Rapidly Assembling Pentapeptides for Injectable Delivery (RAPID) hydrogels are one biomaterial approach to meet these goals, consisting of a family of peptide sequences that assemble into physical hydrogels in physiological media. In this study, we studied our previously reported supramolecularly-assembling RAPID hydrogels functionalized with the ECM-derived cell-adhesive peptide ligands RGD, IKVAV, and YIGSR. Using molecular dynamics simulations and experimental rheology, we demonstrated that these integrin-binding ligands at physiological concentrations (3–12 m<sc>m</sc>) did not impact the assembly of the KYFIL peptide system. In simulations, molecular measures of assembly such as hydrogen bonding and pi-pi interactions appeared unaffected by cell-adhesion sequence or concentration. Visualizations of clustering and analysis of solvent-accessible surface area indicated that the integrin-binding domains remained exposed. KYFIL or AYFIL hydrogels containing 3 m<sc>m</sc> of integrin-binding domains resulted in mechanical properties consistent with their non-functionalized equivalents. This strategy of doping RAPID gels with cell-adhesion sequences allows for the precise tuning of peptide ligand concentration, independent of the rheological properties. The controllability of the RAPID hydrogel system provides an opportunity to investigate the effect of integrin-binding interactions on encapsulated neural cells to discern how hydrogel microenvironment impacts growth, maturation, or differentiation.

Structure-Activity Relationships of RGD-Containing Peptides in Integrin αvβ5-Mediated Cell Adhesion.

The RGD motif is a cell adhesion sequence that binds to integrins, a receptor family for extracellular matrix proteins. We previously reported that the RGDX1X2 sequence, where X1X2 is VF or NY, is required for integrin αvβ5-mediated cell adhesion. However, the importance and applications of the X1X2 combinations and their surrounding sequences of integrin αvβ5-binding RGDX1X2-containing peptides have not been comprehensively elucidated. Therefore, we aimed to identify an RGD-containing peptide with enhanced integrin αvβ5 binding activity. We synthesized various peptides based on the RGDVF and RGDNY peptides to optimize the N-terminal, C-terminal, and X1X2 combinations of the RGDX1X2 sequence. These peptides were immobilized on maleimide-functionalized bovine serum albumin-coated plates via a thiol-maleimide reaction, and cell adhesion was evaluated using HeLa cells and human dermal fibroblasts. Consequently, CPPP-RGDTF and CPPP-RGDTFI were identified as highly active peptides for integrin αvβ5-mediated cell adhesion. CPPP-RGDTF and CPPP-RGDTFI are expected to serve as cell adhesion molecules for developing culture substrates and biomaterials. Furthermore, these findings provide important novel insights into the interaction between the RGD motifs and integrins.

Extrusion 3D printing of keratin protein hydrogels free of exogenous chemical agents

Keratins are a class of intermediate filament proteins that can be obtained from numerous sources including human hair. Materials fabricated from keratins offer desirable characteristics as scaffolds for tissue engineering, including intrinsic cell adhesion sequences and tunable degradation kinetics. The capacity to create 3D printed constructs from keratin-based bio-inks generates unique opportunities for spatial control of scaffold physicochemical properties to direct scaffold functions in ways not readily achieved through other means. The aim of this study was to leverage the controllable rheological properties of keratin hydrogels to create a strategy for extrusion 3D printing of keratin bio-inks without the use of exogenous rheological modifiers, crosslinking agents, or photocurable resins. The rheological properties of keratin hydrogels were tuned by varying two parameters: (a) the ratio of keratose (obtained by oxidative extraction of keratin) to kerateine (obtained by reductive extraction of keratin); and (b) the weight percentage of total keratin protein in the gel. A computational model of the dispensing nozzle for a commercially available extrusion 3D printer was developed to calculate the needed pneumatic printing pressures based on the known rheological properties of the gels. Keratin hydrogel constructs, of varying keratose/kerateine ratios and total keratin weight percentages, were 3D printed in cylindrical geometries via extrusion 3D printing. Rheology and degradation studies showed that gels with greater relative kerateine content exhibited greater flow resistance and slower degradation kinetics when submerged in phosphate buffered saline solution at 37 °C, owing to the presence of cysteine residues in kerateine and the capability of forming disulfide bonds. Total keratin weight percentage was found to influence gel yield stress, with possible implications for tuning filament fidelity. Findings from this work support the use of keratose/kerateine ratio and total keratin weight percentage as handles for modulating rheological characteristics of keratin hydrogels to enhance printability and control scaffold properties.

RGDX1 X2 motif regulates integrin αvβ5 binding for pluripotent stem cell adhesion.

The arginine-glycine-aspartic acid (RGD) motif is a cell adhesion sequence that binds to integrins. Some RGD-containing peptides promote adhesion of both embryonic stem cells and induced pluripotent stem cells (iPSCs); however, not all such RGD-containing peptides are active. In this study, we elucidated the role of RGD-neighboring sequences on iPSC adhesion using diverse synthetic peptides and recombinant proteins. Our results indicate that iPSC adhesion requires RGDX1 X2 sequences, such as RGDVF and RGDNY, and that the X1 X2 residues are essential for the adhesion via integrin αvβ5 but not αvβ3. iPSCs express integrin αvβ5 but not αvβ3; therefore, iPSC adhesion requires the RGDX1 X2 -containing sequences. The importance of the X1 X2 residues was confirmed with both HeLa and A549 cells, which express integrin αvβ5 but not αvβ3. Analysis of RGD-neighboring sequences provides important insights into ligand-binding specificity of integrins. Identification of integrin αvβ5-binding motifs is potentially useful in drug development, drug delivery, cell culture, and tissue engineering.

A novel CKIP-1 SiRNA slow-release coating on porous titanium implants for enhanced osseointegration.

Osseointegration between implants and bone tissue lays the foundation for the long-term stability of implants. The incorporation of a porous structure and local slow release of siRNA to silence casein kinase-2 interacting protein-1 (CKIP-1), a downregulator of bone formation, is expected to promote osseointegration. Here, porous implants with a porous outer layer and dense inner core were prepared by metal coinjection molding (MIM). Mg-doped calcium phosphate nanoparticles (CaPNPs)-grafted arginine-glycine-aspartate cell adhesion sequence (RGD) and transcribed activator (TAT) (MCPRT)/CKIP-1 siRNA complex and polylysine (PLL) were coated onto the surface of the porous implants by layer-by-layer (LBL) self-deposition. The in vitro results showed that the MCPRT-siRNA coating promoted MG63 cell adhesion and proliferation, enhanced the protein expressions (ALP and OC) and bone formation-related gene expression (OPN, OC and COL-1α) in vitro. The in vivo results demonstrated that the porous structure enhanced bone ingrowth and that the local slow release of MCPRT-siRNA accelerated new bone formation at the early stage. The porous structure coupled with local CKIP-1 siRNA delivery constitutes a promising approach to achieve faster and stronger osseointegration for dental implants.

Bioinspired Sandcastle Worm-Derived Peptide-Based Hybrid Hydrogel for Promoting the Formation of Liver Spheroids.

The generation of hepatic spheroids is beneficial for a variety of potential applications, including drug development, disease modeling, transplantation, and regenerative medicine. Natural hydrogels are obtained from tissues and have been widely used to promote the growth, differentiation, and retention of specific functionalities of hepatocytes. However, relying on natural hydrogels for the generation of hepatic spheroids, which have batch to batch variations, may in turn limit the previously mentioned potential applications. For this reason, we researched a way to establish a three-dimensional (3D) culture system that more closely mimics the interaction between hepatocytes and their surrounding microenvironments, thereby potentially offering a more promising and suitable system for drug development, disease modeling, transplantation, and regenerative medicine. Here, we developed self-assembling and bioactive hybrid hydrogels to support the generation and growth of hepatic spheroids. Our hybrid hydrogels (PC4/Cultrex) inspired by the sandcastle worm, an Arg-Gly-Asp (RGD) cell adhesion sequence, and bioactive molecules derived from Cultrex BME (Basement Membrane Extract). By performing optimizations to the design, the PC4/Cultrex hybrid hydrogels can enhance HepG2 cells to form spheroids and express their molecular signatures (e.g., Cyp3A4, Cyp7a1, A1at, Afp, Ck7, Ck1, and E-cad). Our study demonstrated that this hybrid hydrogel system offers potential advantages for hepatocytes in proliferating, differentiating, and self-organizing to form hepatic spheroids in a more controllable and reproducible manner. In addition, it is a versatile and cost-effective method for 3D tissue cultures in mass quantities. Importantly, we demonstrate that it is feasible to adapt a bioinspired approach to design biomaterials for 3D culture systems, which accelerates the design of novel peptide structures and broadens our research choices on peptide-based hydrogels.

Soft Hydrogel Inspired by Elastomeric Proteins.

Elastin polypeptides based on -VPGVG- repeated motifs are widely used in the production of biomaterials because they are stimuli-responsive systems. On the other hand, glycine-rich sequences, mainly present in tropoelastin terminal domains, are responsible for the elastin self-assembly. In a previous study, we have recombinantly expressed a chimeric polypeptide, named resilin, elastin, and collagen (REC), inspired by glycine-rich motifs of elastin and containing resilin and collagen sequences as well. Herein, a three-block polypeptide, named (REC)3, was expressed starting from the previous monomer gene by introducing key modifications in the sequence. The choice was mandatory because the uneven distribution of the cross-linking sites in the monomer precluded the hydrogel production. In this work, the cross-linked polypeptide appeared as a soft hydrogel, as assessed by rheology, and the linear un-cross-linked trimer self-aggregated more rapidly than the REC monomer. The absence of cell-adhesive sequences did not affect cell viability, while it was functional to the production of a material presenting antiadhesive properties useful in the integration of synthetic devices in the body and preventing the invasion of cells.

An Engineered Biomimetic Peptide Regulates Cell Behavior by Synergistic Integrin and Growth Factor Signaling.

Recreating the healing microenvironment is essential to regulate cell-material interactions and ensure the integration of biomaterials. To repair bone, such bioactivity can be achieved by mimicking its extracellular matrix (ECM) and by stimulating integrin and growth factor (GF) signaling. However, current approaches relying on the use of GFs, such as bone morphogenetic protein 2 (BMP-2), entail clinical risks. Here, a biomimetic peptide integrating the RGD cell adhesive sequence and the osteogenic DWIVA motif derived from the wrist epitope of BMP-2 is presented. The approach offers the advantage of having a spatial control over the single binding of integrins and BMP receptors. Such multifunctional platform is designed to incorporate 3,4-dihydroxyphenylalanine to bind metallic oxides with high affinity in a one step process. Functionalization of glass substrates with the engineered peptide is characterized by physicochemical methods, proving a successful surface modification. The biomimetic interfaces significantly improve the adhesion of C2C12 cells, inhibit myotube formation, and activate the BMP-dependent signaling via p38. These effects are not observed on surfaces displaying only one bioactive motif, a mixture of both motifs or soluble DWIVA. These data prove the biological potential of recreating the ECM and engaging in integrin and GF crosstalk via molecular-based mimics.

Fibrinogen alpha chain promotes the migration and invasion of human endometrial stromal cells in endometriosis through focal adhesion kinase/protein kinase B/matrix metallopeptidase 2 pathway†.

Fibrinogen alpha chain (FGA), a cell adhesion molecule, contains two arginyl-glycyl-aspartic acid (RGD) cell adhesion sequences. Our previous study demonstrated that FGA, as an up-regulated protein in endometriosis (EM), was closely related to disease severity and involved in the development of EM. However, the biological functions and underlying mechanism of FGA in EM have not been fully understood. To explore the roles of FGA in EM, we analyzed the effects of FGA on the biological behaviors of human primary eutopic endometrial stromal cells (EuESC). The results indicated FGA knockdown suppressed the migration and invasion ability of EuESC, which also altered the distribution of cytoskeletal filamentous and cell morphology. Western blot analysis demonstrated that knockdown of FGA attenuated the migration-related protein levels of vimentin and matrix metallopeptidase 2 (MMP-2), but not integrin subunit alpha V (ITGAV) and integrin subunit beta 3 (ITGB3). Meanwhile, integrin-linked transduction pathways were detected. We found FGA knockdown significantly suppressed the expression of focal adhesion kinase (FAK) level and protein kinase B (AKT) phosphorylation, without extracellular-signal-regulated kinase (ERK) dependent pathways. Treatment with the AKT inhibitor MK2206 or RGD antagonist highly decreased the effects of FGA on the migration and invasion of EuESC. RGD antagonist treatment strongly inhibited FAK- and AKT-dependent pathways, but not ERK pathways. Our data indicated that FGA may enhance the migration and invasion of EuESC through RGD sequences binding integrin and activating the FAK/AKT/MMP-2 signaling pathway. This novel finding suggests that FGA may provide a novel potential approach to the treatment of EM, which provides a new way to understand the pathogenesis of EM.

Tethering QK peptide to enhance angiogenesis in elastin-like recombinamer (ELR) hydrogels.

The development of new capillary networks in engineered constructs is essential for their survival and their integration with the host tissue. It has recently been demonstrated that ELR-based hydrogels encoding different bioactivities are able to modulate their interaction with the host after injection or implantation, as indicated by an increase in cell adhesion and the ability to trigger vascularization processes. Accordingly, the aim of this study was to increase their angiogenic ability both in vitro and in vivo using a small VEGF mimetic peptide named QK, which was tethered chemically to ELR-based hydrogels containing cell-adhesion sequences in their backbone, such as REDV and RGD, as well as a proteolytic site (VGVAPG). In vitro studies were performed using a co-culture of endothelial and fibroblast cells encapsulated into the ELR-based hydrogels in order to determine cell proliferation after 21 days of culture, as well as the number of cell-cell interactions. It was found that although the presence of this peptide does not influence the morphological and rheological properties of these hydrogels, it has an effect on cell behaviour, inducing an increase in cell proliferation and the formation of endothelial cell clusters. In vivo studies demonstrate that the QK peptide enhances the formation of prominent functional capillaries at three weeks post-injection, as confirmed by H&E staining and CD31 immunohistochemistry. The newly formed functional microvasculature ensures perfusion and connection with surrounding tissues. These results show that ELR-QK hydrogels increase capillary network formation and are therefore attractive candidates for application in tissue regeneration, for example for the treatment of cardiovascular diseases such as myocardial infarction or ischemia.

Chondroinductive Peptides: Drawing Inspirations from Cell-Matrix Interactions.

In the field of regenerative medicine, creating a biomaterial device with the potential alone to affect cellular fate is a desirable translational strategy. Native tissues and growth factors are attractive candidates to provide desired signals in a biomaterial environment. However, these molecules can have translational challenges such as high cost, complicated regulatory pathways, and/or limitations with reproducibility. In regenerative medicine, there is a burgeoning community of investigators who seek to overcome these challenges by introducing synthetic peptides to mimic the desirable signals provided by growth factors and tissue matrices. Since in cartilage tissue, cell-adhesion signaling mediates cell migration, growth, and differentiation, synthetic peptides that mimic a desired cell-adhesion sequence may help to control cellular fate. This review emphasizes the value of the signaling ability of peptides, specifically in the cartilage regeneration field. The primary challenge in cartilage regeneration is to regenerate true hyaline cartilage instead of a fibrous tissue. The vision is to create materials that take advantage of the signaling abilities of peptides and that themselves induce chondrogenesis without the need for tissue-derived matrix or growth factors, which could potentially revolutionize arthritis prevention and treatment.

Cell Adhesion Activity of Peptides Conjugated to Polysaccharides.

Many cell-adhesive peptides have been identified from extracellular matrix (ECM) proteins, such as collagen, fibronectin, laminin, and vitronectin. ECM proteins have various cell-adhesive sequences. Most peptides demonstrate cell-adhesive activity when simply coated on a tissue culture plate, but solubility, conformation, and coating efficiency of the peptides can significantly alter their biological function. Evaluation of peptide cell-adhesive activity using peptide-conjugated polysaccharide constructs is a useful strategy for overcoming peptide solubility and conformation problems. After a simple modification of the polysaccharides, various polysaccharides (chitosan, alginate, and hyaluronate) can fix the peptides on the tissue culture plate quantitatively. The peptide-polysaccharide strategy can be used to fix different active peptides to the polysaccharide at same time, thus, mimicking the biological functions of the ECM. This paper describes the modification of polysaccharides that are suitable for covalently coupling the peptides and evaluation of the cell-adhesive activity of peptide as a peptide-polysaccharide matrix. © 2018 by John Wiley & Sons, Inc.

Cardiac differentiation of induced pluripotent stem cells on elastin-like protein-based hydrogels presenting a single-cell adhesion sequence

Substrate-dependent cardiac differentiation of induced pluripotent stem cells (iPSCs) has been studied on various extracellular matrix (ECM)-derived substrates, such as collagen type I (Col-I). However, ECM-derived substrates have multiple cell-adhesive amino acid sequences and stimulate various signaling pathways in cells, making it difficult to clarify the mechanism of substrate-dependent stem cell differentiation. A substrate presenting one of these sequences is a powerful tool for elucidating the mechanism. We designed elastin-like proteins (ELPs) composed of repetitive VPGIG sequences with or without the RGD cell adhesion motif (ELP-RGD/ELP-Ctrl) and used a chemical crosslinker to generate hydrogels. By adjusting the ELP and crosslinker concentrations, we obtained ELP-Ctrl and ELP-RGD hydrogels with a Young’s modulus of 0.3 kPa. The ELP-Ctrl and ELP-RGD gels were used as a substrate for the cardiac differentiation of cultured murine iPSCs. Cells on the ELP-RGD gel showed four times higher gene expression of the contractile protein troponin T type 2 than those on a Col-I gel, which is an effective substrate for iPSC cardiac differentiation. The ELP-RGD gel might stimulate integrin-derived signaling pathways in the cells to promote cardiac differentiation. This study showed the potential of ELP hydrogels for studying substrate-dependent iPSC cardiac differentiation by enabling the control of cell-adhesive sequence presentation.

Adaptive Multifunctional Supramolecular Assemblies of Glycopeptides Rapidly Enable Morphogenesis.

Despite the well-established biophysical principle of adhesion-guided in vitro morphogenesis, there are few single synthetic molecular species that can rapidly enable morphogenesis (e.g., a cell monolayer to cell spheroids) in a cell culture because adhesion inherently involves many signals. Here we show the use of adaptive multifunctional supramolecular assemblies of glycopeptides, consisting of cell adhesion sequence and saccharide, to induce cell spheroids rapidly from a monolayer of cells. Having a general architecture of N-terminal capping, glycosylation, and an integrin-binding sequence, the glycopeptides self-assemble to form a dynamic continuum of nanostructures (i.e., from nanoparticles to nanofibers) to affect the interactions of integrins, E-selectin, and cadherins with their natural ligands and to act adaptively according to the cellular environment. Such adaptive (i.e., context-dependent) interactions weaken cell-substratum adhesion and enhance intercellular interactions, which rapidly and transiently induce cell spheroids. This work illustrates the use of supramolecular assemblies of simple glycopeptides to modulate biophysical conditions for regulating cell functions, which is a new approach for developing biomaterials.

In vitro expression of human cytomegalovirus UL148 RNA and prediction of its functional sites

Objective To express UL148 RNA of human cytomegalovirus (HCMV) clinical strains in vitro and to study its functions. Methods Urine of a newborn with HCMV infection was inoculated into human embryo lung cells. HCMV clinical strain was isolated and identified by multiplex PCR. UL148 gene was amplified and cloned into pGEM-T-Easy plasmid after double enzyme digestion. A recombinant plasmid was constructed and located at the downstream of the T7 promoter. The recombinant plasmid was identified by electrophoresis of the recombinant plasmid, PCR product and double enzyme product. Sequencing analysis was used for final confirmation. UL148 was transcribed into RNA by 32P labeling. Post-translational modification sites were analyzed by bioinformatics method based on UL148 sequence characteristics. Results The clinical strain of HCMV was obtained in vitro. Electrophoresis and sequencing analysis confirmed the successful construction of the recombinant plasmid. UL148 RNA was transcribed in vitro by T7RNA polymerase. Post-translational modification sites showed that UL148 gene contained one cell adhesion sequence, one legume lectins beta-chain signature, two N-myristoylation sites, one casein kinase Ⅱ phosphorylation site, seven protein kinase C phosphorylation sitse, one cAMP/cGMP-dependent protein kinase phosphorylation site, two N-glycosylation sites and one transmembrane region. Conclusion UL148 gene might encode a viral adhesion molecule involving in the signal transduction in host cells. Key words: Human cytomegalovirus; Clinical virus strain; UL148; Signal transduction

Regenerating Bone via Multifunctional Coatings: The Blending of Cell Integration and Bacterial Inhibition Properties on the Surface of Biomaterials.

In dentistry and orthopedics, it is well accepted that implant fixation is a major goal. However, an emerging concern is bacterial infection. Infection of metallic implants can be catastrophic and significantly reduce patient quality of life. Accordingly, in this work, we focus on multifunctional coatings to simultaneously address and mitigate both these problems. We have developed a tailor-made peptide-based chemical platform that integrates the well-known RGD cell adhesive sequence and the lactoferrin-derived LF1-11 antimicrobial peptide. The platform was covalently grafted on titanium via silanization and the functionalization process characterized by contact angle, XPS, and QCM-D. The presence of the platform statistically improved the adhesion, proliferation and mineralization of osteoblast-like cells compared to control surfaces. At the same time, colonization by representative bacterial strains was significantly reduced on the surfaces. Furthermore, the biological potency of the multifunctional platform was verified in a co-culture in vitro model. Our findings demonstrate that this multifunctional approach can be useful to functionalize biomaterials to both improve cell integration and reduce the risk of bacterial infection.

Elastin-like-recombinamers multilayered nanofibrous scaffolds for cardiovascular applications

Coronary angioplasty is the most widely used technique for removing atherosclerotic plaques in blood vessels. The regeneration of the damaged intima layer after this treatment is still one of the major challenges in the field of cardiovascular tissue engineering. Different polymers have been used in scaffold manufacturing in order to improve tissue regeneration. Elastin-mimetic polymers are a new class of molecules that have been synthesized and used to obtain small diameter fibers with specific morphological characteristics. Elastin-like polymers produced by recombinant techniques and called elastin-like recombinamers (ELRs) are particularly promising due to their high degree of functionalization. Generally speaking, ELRs can show more complex molecular designs and a tighter control of their sequence than other chemically synthetized polymers Rodriguez Cabello et al (2009 Polymer 50 5159–69, 2011 Nanomedicine 6 111–22). For the fabrication of small diameter fibers, different ELRs were dissolved in 2,2,2-fluoroethanol (TFE). Dynamic light scattering was used to identify the transition temperature and get a deep characterization of the transition behavior of the recombinamers. In this work, we describe the use of electrospinning technique for the manufacturing of an elastic fibrous scaffold; the obtained fibers were characterized and their cytocompatibility was tested in vitro. A thorough study of the influence of voltage, flow rate and distance was carried out in order to determine the appropriate parameters to obtain fibrous mats without beads and defects. Moreover, using a rotating mandrel, we fabricated a tubular scaffold in which ELRs containing different cell adhesion sequences (mainly REDV and RGD) were collected. The stability of the scaffold was improved by using genipin as a crosslinking agent. Genipin-ELRs crosslinked scaffolds show a good stability and fiber morphology. Human umbilical vein endothelial cells were used to assess the in vitro bioactivity of the cell adhesion domains within the backbone of the ELRs.

Fabrication of poly(ε-caprolactone)/keratin nanofibrous mats as a potential scaffold for vascular tissue engineering

The natural abundance of cell adhesion sequences, RGD (Arg-Gly-Asp) and LDV (Leu-Asp-Val) in the keratins make them suitable as biomaterials for tissue engineering applications. Herein, keratins were coelectrospun with poly(ε-caprolactone)(PCL) at the ratio of 9/1, 8/2, and 7/3 to afford nanofibrous mats. The resulting mats were surface-characterized by ATR-FTIR, SEM, WCA, and XPS. Cell attachment data showed that NIH 3T3 cells adhered more to the PCL/keratin nanofibrous mats than the pristine PCL mats. The MTT assay revealed that the PCL/keratin mats had improved cell viability. The blood clotting time test (APTT, PT, and TT) indicated the PCL/keratin mats exerted good blood compatibility. These mats would be a good candidate as a scaffold for vascular tissue engineering.

Customized Interface Biofunctionalization of Decellularized Extracellular Matrix: Toward Enhanced Endothelialization.

Interface biofunctionalization strategies try to enhance and control the interaction between implants and host organism. Decellularized extracellular matrix (dECM) is widely used as a platform for bioengineering of medical implants, having shown its suitability in a variety of preclinical as well as clinical models. In this study, specifically designed, custom-made synthetic peptides were used to functionalize dECM with different cell adhesive sequences (RGD, REDV, and YIGSR). Effects on in vitro endothelial cell adhesion and in vivo endothelialization were evaluated in standardized models using decellularized ovine pulmonary heart valve cusps (dPVCs) and decellularized aortic grafts (dAoGs), respectively. Contact angle measurements and fluorescent labeling of custom-made peptides showed successful functionalization of dPVCs and dAoGs. The functionalization of dPVCs with a combination of bioactive sequences significantly increased in vitro human umbilical vein endothelial cell adhesion compared to nonfunctionalized controls. In a functional rodent aortic transplantation model, fluorescent-labeled peptides on dAoGs were persistent up to 10 days in vivo under exposure to systemic circulation. Although there was a trend toward enhanced in vivo endothelialization of functionalized grafts compared to nonfunctionalized controls, there was no statistical significance and a large biological variability in both groups. Despite failing to show a clear biological effect in the used in vivo model system, our initial findings do suggest that endothelialization onto dECM may be modulated by customized interface biofunctionalization using the presented method. Since bioactive sequences within the dECM-synthetic peptide platform are easily interchangeable and combinable, further control of host cell proliferation, function, and differentiation seems to be feasible, possibly paving the way to a new generation of multifunctional dECM scaffolds for regenerative medicine.

Designing dense connective tissues: identifying microenvironmental factors that direct human MSC differentiation in 3D

Event Abstract Back to Event Designing dense connective tissues: identifying microenvironmental factors that direct human MSC differentiation in 3D Jenna Usprech1 and Craig A. Simmons1, 2 1 University of Toronto, Institute of Biomaterials and Biomedical Engineering, Canada 2 University of Toronto, Department of Mechanical and Industrial Engineering, Canada Introduction: Microenvironmental factors such as biomaterial physical and biochemical properties, external mechanical stimuli, and soluble chemical cues integrate in vivo to direct the differentiation of mesenchymal stromal cells (MSCs). Identifying what factor combinations promote the differentiation of MSCs into myofibroblasts (the tissue producing cells of developing valves, ligaments, skin, tendons and periodontal ligaments) is a significant challenge when designing for dense, type I collagen-rich connective tissues. To date, select combinations of microenvironmental factors have been studied in 2D, but systematic consideration of the integration of factors in 3D culture has not been explored fully. Materials and Methods: We developed a 3D screening platform to systematically study MSC responses to microenvironmental stimuli. Permutations of the cell adhesion sequences RGD, DGEA and YIGSR at different concentrations (0-2 mM) were incorporated into 5-11 wt% (5-22 kPa compressive moduli) polyethylene glycol norbornene (PEG-NB) hydrogel arrays. Since PEG-NB is inert and easily crosslinked with UV light, adhesion ligands can be tuned independently from biomaterial properties, enabling us to identify the contribution of individual factors in a combinatorial fashion. Human bone marrow-derived MSCs were encapsulated and cultured in the 3D arrays for 7 days with 0 or 5 ng/mL TGF-β1. The extent of α-smooth muscle actin (αSMA) expression and collagen type I deposition were modeled using least squares estimation and regression on 3D confocal data (Figure 1A) that was analysed using Imaris (Figure 1B). Each experiment was replicated four times and statistical analyses were performed in JMP on the pooled data. Results and Discussion: Regression analyses of the screening data revealed that in the presence of TGF-β1, PEG-NB hydrogel wt% was the most significant factor influencing myofibroblast differentiation (p < 0.0001), with greater αSMA staining intensity manifesting at lower gel wt%. These data are in contrast to MSC myofibroblastic differentiation in 2D, which is promoted by stiffer substrates. With TGF-β1, RGD concentration was correlated with αSMA staining intensity in a positive, biphasic manner and demonstrated a significant, non-linear dependence with PEG-NB wt% (p = 0.02) (Figure 2A). Interestingly, αSMA staining intensity could only be predictably modeled by regression in cultures that were supplemented with TGF-β1. These observations suggest that while MSCs can express αSMA in the absence of exogenous TGF-β1, αSMA expression is only sensitive to material properties in the presence of TGF-β1. Collagen deposition was predominantly negatively correlated with PEG-NB hydrogel wt% (p<0.0001) with or without TGF-β1, with slight non-linear dependence between RGD and DGEA (p = 0.01) (Figure 2B) or linear dependence with RGD (p = 0.04) in the absence or presence of TGF-β1, respectively. Conclusion: The newly developed 3D screening platform enables the systematic identification of optimal conditions for connective tissue engineering when considering multiple interacting microenvironmental factors. The data presented here demonstrate that conditions which promote a myofibroblast phenotype in 2D do not translate completely to the more complex and integrative 3D environment. Keywords: Cell Differentiation, screening, 3D scaffold, instructive microenvironment Conference: 10th World Biomaterials Congress, Montréal, Canada, 17 May - 22 May, 2016. Presentation Type: New Frontier Oral Topic: Biomaterials in constructing tissue substitutes Citation: Usprech J and Simmons CA (2016). Designing dense connective tissues: identifying microenvironmental factors that direct human MSC differentiation in 3D. Front. Bioeng. Biotechnol. Conference Abstract: 10th World Biomaterials Congress. doi: 10.3389/conf.FBIOE.2016.01.02714 Copyright: The abstracts in this collection have not been subject to any Frontiers peer review or checks, and are not endorsed by Frontiers. They are made available through the Frontiers publishing platform as a service to conference organizers and presenters. The copyright in the individual abstracts is owned by the author of each abstract or his/her employer unless otherwise stated. Each abstract, as well as the collection of abstracts, are published under a Creative Commons CC-BY 4.0 (attribution) licence (https://creativecommons.org/licenses/by/4.0/) and may thus be reproduced, translated, adapted and be the subject of derivative works provided the authors and Frontiers are attributed. For Frontiers’ terms and conditions please see https://www.frontiersin.org/legal/terms-and-conditions. Received: 27 Mar 2016; Published Online: 30 Mar 2016. Login Required This action requires you to be registered with Frontiers and logged in. To register or login click here. Abstract Info Abstract The Authors in Frontiers Jenna Usprech Craig A Simmons Google Jenna Usprech Craig A Simmons Google Scholar Jenna Usprech Craig A Simmons PubMed Jenna Usprech Craig A Simmons Related Article in Frontiers Google Scholar PubMed Abstract Close Back to top Javascript is disabled. Please enable Javascript in your browser settings in order to see all the content on this page.