Cavity Design Research Articles

A numerical investigation on thermal analysis of RPC based solar thermochemical reactor for two-step H2O splitting cycle for hydrogen production

Ceria based solar thermochemical cycle is a high-temperature based redox chemical reactions to split H2O or CO2to produce hydrogen and/or syngas. The redox reactions are carried out in a reactor cavity thus the analysis and optimization of design as well as thermal analysis is a crucial factor to improve the solar-to-fuel conversion efficiency. This paper proposes the hybrid design of cylindrical and hemispherical cavity and its effects of geometrical parame-ters such as reticulated porous ceria (RPC) thickness (15 mm, 20 mm, and 25 mm) and gas flow gap (5 mm&10 mm) on temperature and flux distribution and solar-to-fuel efficiency for both steady-state and transient condition. A numerical computational fluid dynamics (CFD) analysis is carried out to study heat and mass transfer as well as geometrical design consid-eration of the STCR cavity under SolTrace generated Gaussian distributed concentrated solar flux. Two-step water-splitting reaction in the Solar Thermochemical cavity reactor (STCR) using ceria (CeO2) has been modeled to explore the oxygen evolution/reaction rate and to estimate solar-to-fuel efficiency and its relationship with geometrical factors. The RPC of 25 mm thickness yields the highest oxygen evolution rate of 0.34 mL/min/gCeO2 and solar-to-fuel efficiencies are 7.82%, 12.07% and 16.18% for 15 mm, 20 mm and 25 mm of RPC thickness, respectively without heat recovery. The operating conditions and optimized geometric factors, based on result analysis and comparison, are discussed in detail.

Predicting behavior of photonic crystal fiber lasers using artificial neural networks

Simulating pulse propagation within fiber lasers is a difficult and computationally demanding task, which limits the ability to accurately capture their complex nonlinear dynamics. This paper leverages artificial intelligence (AI) and artificial neural networks (ANN) to predict the output pulse shape parameters for a ring cavity fiber laser, thus avoiding the need for traditional complex numerical calculations and reducing the overall computational cost. This study focuses on a dissipative soliton resonance (DSR) ring cavity fiber laser, incorporating a photonic crystal fiber (PCF) and mode locked by a real saturable absorber. The integration of the PCF into the laser cavity design enhances the control of both dispersion and nonlinearity, allowing for a greater range of output pulse shapes and parameters. The proposed approach demonstrates the effectiveness of artificial neural networks in predicting pulse parameters, and could pave the way for more efficient design and optimization of fiber lasers. The results of the study show that the ANN model can accurately predict the output pulse shape parameters for the DSR ring cavity fiber laser, and thus offers a promising tool for future research in the field.

Multiple-cell cavity design for high mass axion searches: An extended study

The invisible axion is a well-motivated hypothetical particle which could address two fundamental questions in modern physics—the CP symmetry problem in the strong interactions and the dark matter mystery of our universe. The plausible mass (frequency) range of the QCD axion as a dark matter candidate spans from μeV to meV (O(GHz) to O(THz)). The axion haloscope using a resonant cavity has provided the most sensitive search method in the microwave region. However, experimental searches have been limited to relatively low mass regions mainly due to the reduced cavity volume at high masses. As an effective approach for high-mass axion searches, a unique cavity design, featured by multiple identical cells divided by equidistant thin metal partitions in a single cylindrical cavity, was proposed and successfully demonstrated. We perform an extended study to characterize the multiple-cell cavity design and discuss the various advantages it offers for high-mass axion searches.

Physical design and multi-physics analysis of a 200 MHz continuous wave radio frequency quadrupole accelerator for a proton accelerator facility

Based on the platform of a proton accelerator facility, a 200 MHz high intensity continuous wave (CW) radio frequency quadrupole (RFQ) accelerator has been designed at the Sino-French Institute of Nuclear Engineering and Technology of Sun Yat-Sen University, China. Employing the conventional four-vane structure, the RFQ can accelerate 20 mA proton beam from 20 keV to 2.5 MeV. In the beam dynamics design, the simulated transmission efficiency reaches 99.5% and the vane length is less than 4 m. In the electromagnetic design, for the long-term stable operation, Pi-mode Stabilizer Loops (PISLs) are utilized to achieve more than 10 MHz mode frequency separation and to decrease the effects of dipole modes. The 48 tuners are optimized to provide a range of ± 2 MHz frequency tuning. Additionally, the undercuts are optimized to ensure a good field flatness along the longitudinal direction. Based on the coolant channel design, the multi-physics analysis is performed to investigate the deformation and stress resulting from the dissipation of RF power within the cavity, as well as determine the temperature tuning coefficients of the coolants within the vane and wall. The entire design and analysis of PAFA-RFQ has been completed, and the scheme of the design can also be applied to the design of other RFQ cavities.

Beam dynamics and cavity design of an 8 MeV CW IH-DTL for SYSU-PAFA

As a part of the Particle Accelerator Facility at Sun Yat-sen University (SYSU-PAFA), a 200 MHz drift tube linac (DTL), operating under continuous wave (CW) mode, has been designed. PAFA-DTL is expected to accelerate a 10 mA proton beam from 2.5 MeV to 8 MeV. Using the alternative phase focusing (APF) beam dynamics scheme, a compact cell array has been designed and optimized in order to limit the cavity length to 2.4 m with high acceleration efficiency. As a result, PAFA-DTL contains 31 acceleration cells with beam transmission efficiency reaches 100%, and better output beam quality is obtained by optimizing the input beam parameters. Interdigital H-mode (IH) structure is utilized in the PAFA-DTL cavity, which has achieved a high unloaded quality factor of 13987. Additionally, to ensure the stability of PAFA-DTL under CW operation, a low Kilpatrick factor (Kp) of 1.42 is obtained by adjusting the blending radius of the drift tubes (DTs) to reduce the risk of RF breakdown. The gap voltage distribution through RF design is compared with that from the beam dynamics, and the maximum absolute value of deviation is only 0.73%. In this paper, the detailed design and results of PAFA-DTL, including beam dynamics and RF design, are presented.

A microwave cavity design and optimisation for a homogeneous and faster drying process inside an industrial Agitated Nutsche Filter

Background: Nowadays the disposal or recycling of polyethylene terephthalate (PET) material is a real-world problem. The European Union’s DEM3TO project aims at recycling PET to return it to the main chemical components with which it was produced. In a specific reactor, microwave radiation is used to quickly depolymerise the initial polymer. At the end of the de-polymerization process, a filtering and drying process through an agitated Nutsche filter (ANF) is necessary. Methods: This study aims to design and develop a High Frequency (HF) cavity inside the ANF (plugin “HF-ANF”) to speed up and improve the drying process. The effects studied are the efficiency of the HF cavity as a function of the heating process, the evaporation/drying process, and the mechanical mixing (due to the blades) of the mixture. Results: During these studies it was possible to improve the efficiency of the HF plugin and allowing to absorb more than the 95% of the microwave energy into the mixture to increase the drying speed and the drying homogeneity of the ANF. In addition, the mixture was characterised to obtain the dielectric proprieties as a function of the temperature of the ANF and the concentration of the residual water. Conclusions: The study allowed us to develop some important methodology that usually cannot to be simulated in a non-multi physics simulator. The careful modelling of certain aspects that are not normally available in EM (Electro-Magnetic) simulators, like variable geometries, mixed material, heating effect and the dielectrics characterization process are difficult and critical process but are very important steps to be undertaken in order to obtain results that can be compared with real measurements.

Suppressing the sample-to-sample variation of photonic crystal nanocavity Q-factors by air-hole patterns with broken mirror symmetry.

It is known that the quality factors (Q) of photonic crystal nanocavities vary from sample to sample due to air-hole fabrication fluctuations. In other words, for the mass production of a cavity with a given design, we need to consider that the Q can vary significantly. So far, we have studied the sample-to-sample variation in Q for symmetric nanocavity designs, that is, nanocavity designs where the positions of the holes maintain mirror symmetry with respect to both symmetry axes of the nanocavity. Here we investigate the variation of Q for a nanocavity design in which the air-hole pattern has no mirror symmetry (a so-called asymmetric cavity design). First, an asymmetric cavity design with a Q of about 250,000 was developed by machine learning using neural networks, and then we fabricated fifty cavities with the same design. We also fabricated fifty symmetric cavities with a design Q of about 250,000 for comparison. The variation of the measured Q values of the asymmetric cavities was 39% smaller than that of the symmetric cavities. This result is consistent with simulations in which the air-hole positions and radii are randomly varied. Asymmetric nanocavity designs may be useful for mass production since the variation in Q is suppressed.

Ultra-Flat Supercontinuum Generation in an All-Fiber Self-Q-Switched Er/Yb Laser

A supercontinuum source based on a self-Q-switched Er/Yb-codoped fiber laser has been experimentally demonstrated. At different pump powers, starting at a moderate value of 1.1 W, self-Q-switched pulses with a broad flat spectrum of ~ 560 nm width spanning over the range ~1600 – 2160 nm at −5 dB level (considering the Raman peak) are obtained. Such wide spectrum can be achieved directly at the output of the fiber laser resonator, making the structure compact and robust. With a maximum pump power of 4.9 W, the repetition rate, average output power, peak power and pulse energy are approximately 14.7 kHz, 465 mW, 66 kW and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$31~\mu \text{J}$ </tex-math></inline-formula> , respectively. This compact SC laser configuration has the merits of simple cavity design, low cost and good robustness, which provide a SC source that can be easily applied to numerous areas, such as spectroscopy, optical communications, metrology and biomedical applications.

Assessment of debris extrusion on using step-wise irrigant activation versus conventional activation in different access designs: An ex-vivo study

Introduction: A successful endodontic therapy mainly depends on the effective chemomechanical debridement. The present study assessed the effect of different activation modes on debris extrusion in different access cavity designs. Materials and Methods: Freshly extracted 168 maxillary premolars were collected. They were allocated into two groups (n = 84) (Group I: Traditional Endodontic Access (TEA) and Group II: Contracted Endodontic Access (CEA)). These groups were further subgrouped (n = 28) based on the activation protocol used (Subgroup A, D: Manual irrigation with no activation, Subgroup B, E: Conventional activation (CA), and Subgroup C, F: Step-wise irrigant activation). Each tooth specimen was inserted into Eppendorf for debris collection. The canals were instrumented using HyFlex CM rotary files to 0.04 taper. The irrigation was specific to the experimental subgroups, which was done by a single operator. Following the experimental irrigation, the collected debris was weighted using an analytical balance. The collected data were statistically analyzed. Results: Statistical significant debris extrusion was seen with TEA (P &lt; 0.05). Among the subgroups, step-wise irrigant activation technique showed significant (P &lt; 0.05) debris extrusion. Conclusion: CEA showed less debris extrusion when the CA technique was used for irrigation.

Low beta superconducting cavity system design for HIAF iLinac

A superconducting ion-Linac (iLinac), which is supposed to work as the injector in the High Intensity heavy-ion Accelerator Facility project, is under development at the Institute of Modern Physics (IMP), Chinese Academy of Sciences. The iLinac is a superconducting heavy ion linear accelerator approximately 100 meters long and contains 96 superconducting cavities in two types of 17 cyromodules. Two types of superconducting resonators (quarter-wave resonators with a frequency of 81.25 MHz and an optimal beta β = v/c = 0.07 called QWR007 and half-wave resonators with a frequency of 162.5 MHz and an optimal beta β = 0.15 called HWR015) have been investigated. The cavity design included extensive multi-parameter electromagnetic simulations and mechanical analysis，and its results are described in details. The fundamental power coupler and cavity dynamic tuner designs are also presented in this article. The prototypes are under manufacturing and expected to be ready in 2023.

Trapped ions beyond carrier and sideband interactions

Trapped ions driven by electromagnetic radiation constitute one of the most developed quantum technologies to date. The scenarios range from proof-of-principle experiments to on-chip integration for quantum information units. In most cases, these systems have operated in a regime where the magnitude of the ion-radiation coupling constant is much smaller than the trap and electronic transition frequencies. This regime allows the use of simple effective Hamiltonians based on the validity of the rotating-wave approximation. However, novel trap and cavity designs now permit regimes in which the trap frequency and the ion-radiation coupling constant are commensurate. This opens up new avenues for faster quantum gates and state transfers from the ion to a photon and other quantum operations. From the theoretical side, however, there is not yet much known in terms of models and applications that go beyond the weak-driving scenario. In this work, we present two main results in the scenario of stronger driving. First, we revisit a known protocol to reconstruct the motional Wigner function and expand it to stronger-driving lasers. This extension is not trivial because the original protocol makes use of effective Hamiltonians valid only for weak driving. The use of stronger fields or faster operations is desirable since experimental reconstruction methods of that kind are usually hindered by decoherence. We then present a model that allows the analytical treatment of stronger driving and that works well for nonresonant interactions, which are generally out of the reach of previous models.

Multiplexed optical fiber cell temperature sensing system with high sensitivity and accuracy.

A multiplexed fiber laser sensing system for cell temperature is proposed. To the best of the authors' knowledge, this is the first multilongitudinal mode (MLM) optical fiber laser sensor array designed for cell temperature sensing. A two-channel cell temperature sensing system with high sensitivity and real-time sensing capability is achieved. The temperature change of human hepatoellular carcinomas (HepG2) cells under the influence of exogenous chemical aflatoxin B1 (AFB1) can be monitored in real time. A fiber laser cavity consists of a pair of fiber Bragg gratings (FBGs) with matched central wavelengths and a piece of erbium-doped fiber (EDF). The static FBG is utilized for design of fiber laser cavity and laser modes selection. In comparison, the sensing FBG is used for cell temperature sensing. The sensing FBG has a length of 10mm and a diameter of . Beat frequency signals (BFS) are generated by MLM lasers after optical-to-electrical conversion at a photodetector. Frequency change of a BFS is closely related to the reflected wavelength change of the sensing FBG. Through frequency division multiplexing, two fiber laser cavities are designed in the sensing system for two-channel temperature sensing. Frequency shift of a BFS that represents temperature change of cells can be automatically recorded in seconds. A two-channel cell temperature sensing system is designed with high sensitivities of 101.62 and , respectively. The temperature change of HepG2 cells under the influence of exogenous chemical AFB1 is monitored in real time. The proposed system has the advantages of simple structure, high sensitivity, and two-channel sensing capability. Our study provides a simple and effective method to design a fiber laser sensor system without complex demodulation techniques and expensive optical components.

High-efficiency coupled-cavity optical frequency comb generation

We present a high efficiency source of picosecond pulses derived from a dual cavity optical frequency comb generator. This approach overcomes the limitations of single cavity comb generators that are restricted to efficiencies of a few percent. We achieve picosecond pulses with GHz repetition rates offering over a hundred times higher output efficiency than a single cavity design and demonstrate tuning of pulse width by varying the modulation depth of the intra-cavity electro-optic modulator. These results provide a wavelength-agnostic design with a compact footprint for the development of portable picosecond pulsed laser systems for timing, metrology, and LIDAR applications.

Tunable performance of indium tin oxide-zinc oxide as Q-switcher

This work successfully demonstrated the tunable performance of a Q-switched pulse erbium-doped fiber laser (QPEDFL) using Indium Tin Oxide-Zinc Oxide (ITO-ZnO)-based SA. The ITO-ZnO is a material growth between transparent conducting oxides and transition metal oxides on a glass slide. The mechanical exfoliation technique is applied to serve the ITO-ZnO as SA and inserted in a single-ring cavity design. The QPEDFL in a single ring cavity gives the repetition rate, pulse width, average output power, pulse energy, and SNR of 38.49 kHz, 5.50 µs, 0.47 mW, 12.72 nJ, and 64.20 dB, respectively. Furthermore, the ITO-ZnO as SA provides a tuning range of 30.40 nm. By tuning the TBF, the wavelength changes from 1531.60 nm to 1562.0 nm, causing the pulse repetition rate and pulse width of the QPEDFL to vary from 41.50 kHz to 17.20 kHz, and 4.22 µs to 10.05 µs, respectively. According to the results obtained, it can confidently say the suggested pulse laser has potential in the application of optical communication systems as a light source.

Control, Modulation, and Analytical Descriptions of Vibrational Strong Coupling

Here, we review the design of optical cavities, transient and modulated responses, and theoretical models relevant to vibrational strong coupling (VSC). While planar Fabry-Perot cavities remain the most common choice for experiments involving vibrational polaritons, other choices including plasmonic and phononic nanostructures, extended lattice resonances, and wavelength-scale three-dimensionally confined dielectric cavities have unique advantages, which are discussed. Next, we review the nonlinear response to laser excitation of VSC systems revealed by transient pump-probe and 2DIR techniques. The assignment of various features observed in these experiments has been an important topic with significant recent progress and controversy. The modulation of VSC systems by various means such as ultrafast pulses and electrochemical methods is also described. Finally, theoretical approaches to understanding the physics and chemistry of VSC systems are reviewed with an eye toward their applicability and usefulness. These fall into two main categories: (1) solving for the eigenmodes of the system and (2) evolutionary techniques including the transfer-matrix method and its generalizations. The need for quantum optical methods of describing VSC systems is critically evaluated in light of current experimental work, and we discuss circumstances which necessitate consideration of the full in-plane dispersion of the Fabry-Perot cavities.

Design of a prototypical natural circulation water-based reactor cavity cooling system (RCCS) for a pebble-bed generic FHR

A prototypical natural circulation water-based reactor cavity cooling system (RCCS) for the UC Berkeley Mark-1 pebble-bed gFHR is designed based on one-dimensional thermal hydraulics modeling and optimization implemented in an in-house MATLAB code. The model employs a lumped core consisting of fuel pebble and graphite pebble regions, while the graphite reflector, vessel, and RCCS are represented as separate but energy-coupled regions. The model is derived based on steady state energy balance equations accounting for conductive heat transfer from the lumped core to the vessel and subsequent radiative heat transfer to the RCCS and convective heat transfer in the water. Mass flow rate is calculated based on momentum and thermal energy balance in the RCCS. Starting with ANL’s water NSTF as baseline, effects of RCCS design parameters such as size of the plate between pipes, pipe diameter, source-to-sink distance, surface emissivity, and pitch from the core are examined in an integral effects framework which accounts for subsequent variation of the mass flow rate, number of pipes, convection coefficient, mean region and surface temperatures, radiative view factors, and water outlet temperature. The importance of including a prototypical reactor design in RCCS design calculations is emphasized as the calculations show that temperature drops from the core to the RCCS fluid to transfer the heat tend to be the limitation not the heat removal capacity of the fluid. A closed-loop design is obtained with capability to safely remove up to 0.72% of the nominal reactor power at maximum estimated peak conditions and 0.40% at shutdown. The design is based on physics calculations and does not account for economic optimization.

Bimetal Temperature-Compensated Ramsey Cavity for Atomic Fountain Frequency Standards

A typical Ramsey cavity, commonly used in atomic fountain frequency standards (AFFSs) for microwave interrogation, is sensitive to ambient temperature variation. Then, it becomes one of the main limiting factors for the AFFSs operating in a narrow operating-temperature range and a temperature-well-controlled environment up to now. In this article, a new design of bimetal temperature-compensated Ramsey cavity (BTCRC) based on the thermal expansion self-compensating mechanism is presented and experimentally demonstrated. This cavity is a typical TE011-mode cylindrical microwave resonator with a titanium tube and two oxygen-free copper (OFC) caps. The resonance frequency (RF) of the cavity can be immune to temperature variations if the dimensions of the tube and caps are properly designed. To validate this self-compensating mechanism, a BTCRC resonating at the Rb clock frequency with a <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$Q$ </tex-math></inline-formula> -factor of about 17000 is constructed. And its RF thermal coefficient is measured to be 0.73 kHz/°C, which is about 150 times superior to −115.9 kHz/°C of a typical OFC Rb cavity in the temperature range of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$22.48~^{\circ }\text{C}$ </tex-math></inline-formula> – <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$37.48~^{\circ }\text{C}$ </tex-math></inline-formula> . During the operation of AFFSs, this BTCRC ensures that the microwave field amplitude inside the cavity, which dictates the transition probability and thus the contrast of the Ramsey fringes, will be stable in time. In addition, the potential temperature variation-induced frequency shifts due to cavity pulling are significantly minimized.

Advanced polarization analysis capability on the very small-angle neutron scattering instrument at the NIST Center for Neutron Research

The Very Small Angle Neutron Scattering (VSANS) diffractometer at the National Institute of Standards and Technology has been commissioned and is in the user program. A large available space of nearly 2 m along the beam in the sample area not only enhances the existing SANS polarization analysis capability, but also makes it possible for implementation of other polarization analysis capabilities which would not be easily available on existing SANS instruments, including grazing-incidence small-angle neutron scattering with polarization analysis and spherical neutron polarimetry. We present two polarized setups, one for high magnetic sample fields and the other for low magnetic sample fields, together with a versatile and flexible operational platform for polarized beam experiments. The design of a magnetostatic cavity device that provides better field homogeneity and thus longer 3He polarization relaxation time is discussed. It consists of an end-compensated magnetic shielded solenoid with non-identical holes to accommodate the divergent scattered beam in a constrained distance. Significant improvement in polarized neutronic performance, 3He polarization relaxation time, and an extended momentum transfer range for polarization analysis are presented. Improved neutron polarizing devices, double V-shaped supermirror polarizer, adiabatic radio-frequency spin flipper, and a 3He spin analyzer have yielded an initial instrumental flipping ratio of 100, allowing for higher sensitivity to detection of weak magnetic features in the sample.

Bullseye dielectric cavities for photon collection from a surface-mounted quantum-light-emitter

Coupling light from a point source to a propagating mode is an important problem in nano-photonics and is essential for many applications in quantum optics. Circular “bullseye” cavities, consisting of concentric rings of alternating refractive index, are a promising technology that can achieve near-unity coupling into a first lens. Here we design a bullseye structure suitable for enhancing the emission from dye molecules, 2D materials and nano-diamonds positioned on the surface of these cavities. A periodic design of cavity, meeting the Bragg scattering condition, achieves a Purcell factor of 22.5 and collection efficiency of 80%. We also tackle the more challenging task of designing a cavity for coupling to a low numerical aperture fibre in the near field. Finally, using an iterative procedure, we study how the collection efficiency varies with apodised (non-periodic) rings.

Microwave heating of biomass waste residues for sustainable bioenergy and biomass materials preparation: A parametric simulation study

Sustainable bioenergy and biomass materials preparation from biomass waste residues using microwave heating has attracted widespread attention. However, the microwave heating process still has limitations of uneven temperature distribution and low energy conversion efficiency. This study constructed a coupled electromagnetic and heat transfer model for the microwave heating of waste tobacco stem (TS) biomass using COMSOL Multiphysics® software. The microwave heating behavior of TS biomass was predicted using the finite element method for different parameters, and this model has been experimentally verified to be dependable with a maximum relative error of less than 10%. Simulation results show that hot spots caused by interface polarization and standing waves generate inhomogeneous temperature distributions. The microwave cavity design with two waveguides and controlled frequency changes can improve microwave energy absorption and heating uniformity. A suitable microwave power can improve efficiency and reduce energy consumption during heating. Meanwhile, the TS biomass with 30% moisture content and in the cavity's low region (0–10 cm) can make maximum use of microwave energy, and the average and maximum energy efficiency achieve 59.15% and 87.79%, respectively. The results provide technical support and new perspectives for preparing sustainable bioenergy and biomass materials from waste TS biomass via microwave irradiation.