Cationic Vesicles Research Articles

Aggregation Characteristics of Biobased Anionic Surfactant, Hydroxy Alkane Sulfonate in Aqueous CaCl2 Solutions: Vesicle and Supported Bilayer Formation.

Vesicles are known to spontaneously adsorb onto solid-liquid interfaces and to form supported bilayers in aqueous solution. Cationic surfactants have typically been used to generate supported bilayers because solid surfaces in water are often negatively charged. The present study investigated the aggregation behavior of an anionic surfactant, hydroxy alkane sulfonate having a C18 alkyl chain (C18HAS) in aqueous CaCl2 solutions. These assessments were performed by acquiring data related to equilibrium surface tension, the solubilization of an oil-soluble dye, UV-visible transmittance, pyrene fluorescence and dynamic light scattering together with freeze-fracture transmission electron microscopy observations. The results suggest that C18HAS can form vesicles in aqueous CaCl2 solutions under certain surfactant concentrations. Specifically, this aggregation behavior is greatly affected by C18HAS/CaCl2 molar ratio. At the C18HAS/CaCl2 molar ratio is less than an equivalence point (that is, less than 2:1), phase separation occurs with the formation of a vesicle above solubility limit of the C18HAS Ca salt. On the other hand, in the case that the C18HAS/CaCl2 molar ratio is above an equivalence point (that is, above 2:1), the Na salt of C18HAS forms micelles above the critical micelle concentration (cmc), causing solubilization of vesicles. Analyses by high-speed atomic force microscopy demonstrated that the C18HAS vesicles can spontaneously form a supported bilayer on a negatively charged mica surfaces, similar to the behavior of cationic surfactant vesicles, even though C18HAS is an anionic surfactant. These results suggest that C18HAS could serve as a detergent component but also as a surface modifier when the C18HAS/CaCl2 molar ratio is optimized.

Structure and Characterization of Catanionic Complexes and Biocompatible Vesicles of N-Acyltaurine and Sarcosine Alkyl Ester: Encapsulation and Release Studies with 5-Fluorouracil.

Hydrated dispersions containing equimolar mixtures of cationic and anionic amphiphiles, referred to as catanionic systems, exhibit synergistic physicochemical properties, and mixing single-chain cationic and anionic lipids can lead to the spontaneous formation of vesicles as well as other phase structures. In the present work, we have characterized two catanionic systems prepared by mixing N-acyltaurines (NATs) and sarcosine alkyl esters (SAEs) bearing 11 and 12 C atoms in the acyl/alkyl chains. Turbidimetric and isothermal titration calorimetric studies revealed that both NATs form equimolar complexes with SAEs having matching acyl/alkyl chains. The three-dimensional structure of the sarcosine lauryl ester (lauryl sarcosinate, LS)-N-lauroyltaurine (NLT) equimolar complex has been determined by single-crystal X-ray diffraction. The LS-NLT equimolar complex is stabilized by electrostatic attraction and multiple hydrogen bonds, including classical, strong N-H···O hydrogen bonds as well as several C-H···O hydrogen bonds between the two amphiphiles. DSC studies showed that both equimolar complexes show single sharp phase transitions. Transmission electron microscopy and dynamic light scattering studies have demonstrated that the LS-NLT catanionic complex assemblies yield stable medium-sized vesicles (diameter 280-350 nm). These liposomes were disrupted at high pH, suggesting that the designed catanionic complexes can be used to develop base-labile drug delivery systems. In vitro studies with these catanionic liposomes showed efficient entrapment (73% loading) and release of the anticancer drug 5-fluorouracil in the physiologically relevant pH range of 6.0-8.0. The release rate was highest at pH 8.0, reaching about 78%, 90%, and 100% drug release at 2, 6, and 12 h, respectively. These observations indicate that LS-NLT catanionic vesicles will be useful for designing drug delivery systems, particularly for targeting organs such as the colon, which are inherently at basic pH.

Fungicide-Loaded Liposomes for the Treatment of Fungal Diseases in Agriculture: An Assessment of Botrytis cinerea.

In this work, liposomes loaded with the fungicide, Fludioxonil (FLUD), for the containment of fungal diseases in agriculture were developed. Three types of vesicles with different compositions were compared: (I) plain vesicles, composed of soy phosphatidylcholine and cholesterol; (II) PEG-coated vesicles, with an additional polyethylene glycol coating; and (III) cationic vesicles, containing didodecyldimethylammonium bromide. Nanometric-sized vesicles were obtained both by the micelle-to-vesicle transition method and by the extrusion technique, and encapsulation efficiency, drug loading content, and Zeta potential were determined for all the samples. The extruded and PEGylated liposomes were the most stable over time and together with the cationic ones showed a significant prolonged FLUD release capacity. The liposomes' biological activity was evaluated on conidial germination, germ tube elongation and colony radial growth of the ascomycete Botrytis cinerea, a phytopathogenic fungus affecting worldwide many important agricultural crops in the field as well as in the postharvest phase. The extruded and PEGylated liposomes showed greater effectiveness in inhibiting germ tube elongation and colony radial growth of the fungal pathogen, even at 0.01 µg·mL-1, the lowest concentration assessed.

PH-Induced conversion of bolaamphiphilic vesicles to reduction-responsive nanogels for enhanced Nile Red and Rose Bengal delivery

This study details the preparation and investigation of molecular nanogels formed by the self-assembly of bolaamphiphilic dipeptide derivatives containing a reduction-sensitive disulfide unit. The described bolaamphiphiles, featuring amino acid terminal groups, generate cationic vesicles at pH 4, which evolve into gel-like nanoparticles at pH 7. The critical aggregation concentration has been determined, and the nanogels' size and morphology have been characterized through Dynamic Light Scattering (DLS) and Transmission Electron Microscopy (TEM). Circular Dichroism (CD) spectroscopy reveals substantial molecular reconfigurations accompanying the pH shift. These nanogels enhance the in vitro cellular uptake of the lipophilic dye Nile Red and the ionic photosensitizer Rose Bengal into Human colon adenocarcinoma (HT-29) cells, eliminating the need for organic co-solvents in the former case. Fluorescence measurements with Nile Red as a probe indicate the reduction-sensitive disassembly of the nanogels. In photodynamic therapy (PDT) applications, Rose Bengal-loaded nanogels demonstrate notable improvements, with flow cytometry analysis evidencing increased apoptotic activity in the study with HT-29 cells.

Unveiling the Potential of Surface Active Ionic Liquids Based Catanionic Vesicles for Tailored Delivery of Curcumin and its Enhanced Therapeutic Efficacy

AbstractNano vehicles for drug delivery with stimuli‐responsive characteristics are gaining prominence due to their ability to enhance traditional drug delivery methods by minimizing side effects and improving drug efficacy. Among the various stimuli‐responsive systems, pH‐responsive drug delivery nano vehicles have garnered significant attention. Utilizing this pH variance, tailored drug delivery nano vehicles can release encapsulated drugs on demand. Here, we developed pH‐responsive catanionic vesicles to create customized drug delivery nano vehicles responsive to stimuli, particularly pH. we have designed catanionic vesicles through interacting two oppositely charged surface active ionic liquids (SAILs), i. e. cationic ‐methyl‐4‐(2‐(dodecyloxycarbonylmethyl)morpholin‐4‐ium bromide [C12EMorph][Br] with anionic Choline Oleate ([Ch][Ol]). The spherically shaped micellar aggregates of [C12EMorph][Br] are transformed into pH responsive vesicular nanoaggregates through judicious addition of [Ch][Ol]. The morphological transition was studied through various analytical techniques including DLS, FRET and SANS. We used these pH responsive vesicular nanoaggregates to load representative hydrophobic drug curcumin in order to enhance its solubility, efficacy and bioavailability. This innovative approach in designing pH‐responsive vesicular nanoaggregates using two biocompatible SAILs signifies a breakthrough in biomedical research, holding promise for advancements in drug delivery and therapeutic applications.

Robust Electrostatic-Templated Polymerization for Controllable Synthesis of Stable and Permeable Polyelectrolyte Vesicles.

Polymer vesicles are of profound interest for designing delivery vehicles and nanoreactors toward a variety of biomedical and catalytic applications, yet robust synthesis of stable and permeable vesicles remains challenging. Here, we propose an electrostatic-templated polymerization that enables fabrication of polyelectrolyte vesicles with simultaneously regulated stability and permeability. In our design, cationic monomers were copolymerized with cross-linkers in the presence of a polyanionic-neutral diblock copolymer as a template. By properly choosing the block length ratio of the template, we fabricated a type of polyion complex vesicle consisting of a cross-linked cationic membrane, electrostatically assembled with the template copolymer which can be removed by sequential dissociation and separation under concentrated salt. We finally obtained stable polyelectrolyte vesicles of regulated size, membrane permeability, and response properties by tuning the synthesis factors including ionic strength, cross-linker type, and fraction as well as different monomers and concentrations. As a proof-of-concept, lipase was loaded in the designed cationic vesicles, which exhibited enhanced enzyme stability and activity. Our study has developed a novel and robust strategy for controllable synthesis of a new class of stable and permeable polymer (polyelectrolyte) vesicles that feature great potential applications as functional delivery carriers and nanoreactors.

Surface Charge-Switchable Antifouling Block Copolymer with Bacteriostatic Properties.

Zwitterionic polymers are an emerging family of effective, low-fouling materials that can withstand unintended interactions with biological systems while exhibiting enhanced activity in bacterial matrix deterioration and biofilm eradication. Herein, we modularly synthesized an amphiphilic block copolymer, ZABCP, featuring potential bacteriostatic properties composed of a charge-switchable polyzwitterionic segment and a redox-sensitive pendant disulfide-labeled polymethacrylate block. The leucine-appended polyzwitterionic segment with alternatively positioned cationic amine and anionic carboxylate functionalities undergoes charge alterations (+ve → 0 → -ve) on pH variation. By introducing appropriate amphiphilicity, ZABCP forms distinct vesicles with redox-sensitive bilayer membranes and zwitterionic shielding coronas, enabling switching of surface charge. ZABCP vesicles exhibit 180 ± 20 nm hydrodynamic diameter, and its charge switching behavior in response to pH was confirmed by the change of zeta potential value from -23 to +36 mV. The binding interaction between ZABCP vesicles with lysozyme and pepsin proteins strengthens when the surface charge shifts from neutral (pH 7.4) to either anionic or cationic. This surface-charge-switchable phenomenon paves the way for implementing cationic ZABCP vesicles for bacterial cell growth inhibition, which is shown by the pronounced transition of cellular morphology, including clustering, aggregation, or elongation as well as membrane disruption for both Bacillus subtilis (Gram-positive) and Escherichia coli (Gram-negative). Such enhanced bacteriostatic activity could be ascribed to a strong electrostatic interaction between cationic vesicles and negatively charged bacterial membranes, leading to cell membrane disruption. Overall, this study provides a tailor-made approach to adopt low-fouling properties and potential bacteriostatic activity using zwitterionic polymers through precise control of pH.

A multipurpose mitochondrial NIR probe for imaging ferroptosis and mitophagy.

This paper explores the use of a di-cationic fluorophore for visualizing mitochondria in live cells independent of membrane potential. Through the synthesized di-cationic fluorophore, we investigate the monitoring of viscosity, ferroptosis, stress-induced mitophagy, and lysosomal uptake of damaged mitochondria. The designed fluorophore is based on DQAsomes, cationic vesicles responsible for transporting drugs and DNA to mitochondria. The symmetric fluorophores possess two charge centres separated by an alkyl chain and are distinguished by a pyridinium group for mitochondrial selectivity, the C-12 alkyl substitution for membrane affinity, and an electron donor-π-acceptor fluorescent scaffold for intramolecular charge transfer. The synthesized fluorophores, PP and NP, emit wavelengths exceeding 600 nm, with a significant Stokes shift (130-211 nm), and NP demonstrates near-infrared emission (∼690 nm). Our study underscores the potential of these fluorophores for live-cell imaging, examining physiological responses such as viscosity and ferroptosis, and highlights their utility in investigating mitophagy damage and lysosomal uptake.

Modulation of Phase Behavior and Microscopic Dynamics in Cationic Vesicles by 1-Decyl-3-methylimidazolium Bromide.

Synthetic cationic lipids have garnered significant attention as promising candidates for gene/DNA transfection in therapeutic applications. The phase behavior of the vesicles formed by these lipids is intriguing, revealing intricate connections to the structure and dynamics of the membrane. These phenomena emerge from the complex interplay between hydrophobic and electrostatic interactions of the lipids. In this study, we explore the impact of an ionic liquid-based surfactant, 1-decyl-3-methylimidazolium bromide (DMIM[Br]), on the structural, dynamical, and phase behavior of cationic dihexadecyldimethylammonium bromide (DHDAB) vesicles. Our investigations indicate that the addition of DMIM[Br] increases the vesicle size while thinning the membrane. Further, DMIM[Br] also induces substantial changes in the membrane phase behavior. At 10 and 25 mol %, DMIM[Br] eliminates the pre-transition from coagel to intermediate crystalline (IC) phase and decreases the onset temperature of the main phase transition to the fluid phase. In the cooling cycle, the addition of DMIM[Br] further induces the formation of an intermediate gel phase. This behavior is reminiscent of the non-synchronous ordering observed in the DODAB membrane, a longer-chain counterpart of DHDAB. Interestingly, at 40 mol % of DMIM[Br], the formation of the intermediate gel phase is largely suppressed. Neutron scattering data provide evidence that the addition of DMIM[Br] enhances lipid mobility in coagel and fluid phases, suggesting that DMIM[Br] acts as a plasticizer, enhancing membrane fluidity across all of the phases. Our findings infer that DMIM[Br] modulates the membrane's phase behavior and fluidity, two essential ingredients for the efficient transport of cargo, by controlling the balance of electrostatic and hydrophobic interactions.

Inner leaflet cationic lipid increases nucleic acid loading independently of outer leaflet lipid charge in asymmetric liposomes.

Use of cationic lipid vesicles (liposomes) can yield large amounts of nucleic acid entrapped inside the vesicles and/or bound to the external surface of the vesicles. To show a method to prepare asymmetric lipid vesicles (liposomes) with high amounts of entrapped nucleic acid is possible, symmetric and asymmetric lipid vesicles composed of mixtures of neutral (zwitterionic), anionic, and/or cationic phospholipids were formed in the presence of oligo DNA. For symmetric large unilamellar vesicles nucleic acid association with vesicles was roughly 100 times greater for vesicles with a net cationic charge than for vesicles having a net neutral or anionic net charge. A high degree of association between nucleic acid and lipid was also achieved using asymmetric large unilamellar vesicles with a net cationic charge in their inner leaflet, even when they had an anionic charge in their outer leaflet. In contrast, asymmetric vesicles in which only the outer leaflet had a net cationic charge had only low amounts of vesicle-associated nucleic acid, similar in amount to the amount of nucleic acid associated with asymmetric vesicles with an outer leaflet having a net anionic charge. These results indicate that in asymmetric vesicles with cationic lipid enriched inner leaflets nucleic acid is largely entrapped inside the vesicle lumen rather than bound to their external surface, and that asymmetric vesicles can be used to trap high amounts of nucleic acid even when using a lipid composition in the outer leaflet of a lipid vesicle that does not associate with nucleic acids. Such asymmetrically charged vesicles should have applications in studies of membrane protein-nucleic acid interactions as well as in studies of how membrane charge asymmetry can influence membrane protein structure, orientation, and function.

Reduction-Responsive Cationic Vesicles from Bolaamphiphiles with Ionizable Amino Acid or Dipeptide Polar Heads.

This paper presents a study of the aggregation of cationic bolaamphiphilic molecules into vesicles. These molecules are based on a cystamine core with protonated terminal dipeptide groups. The study found that vesicles can be formed at pH 4 for all of the dipeptide-terminated bolaamphiphiles containing different combinations of l-valine, l-phenylalanine, and l-tryptophan. The concentration for aggregation onset was determined by using pyrene as a fluorescent probe or light dispersion for compounds with tryptophan. Dynamic light scattering (DLS) studies and transmission electron microscopy (TEM) reveal that the vesicles have diameters ranging from 140 to 500 nm and show the capability of loading hydrophobic cargos, such as Nile red, and their liberation in reductive environments. Furthermore, the bolaamphiphiles are only fully protonated and prone to vesicle formation at acidic pH, making them a promising alternative for gastrointestinal delivery.

Light and pH responsive catanionic vesicles based on a chalcone/flavylium photoswitch for smart drug delivery: From molecular design to the controlled release of doxorubicin

Spatially and temporally localized delivery is a promising strategy to circumvent adverse effects of traditional drug therapy such as drug toxicity and prolonged treatments. Stimuli-responsive colloidal nanocarriers can be crucial to attain such goals. Here, we develop a delivery system based on dual light and pH responsive vesicles having a cationic bis-quat gemini surfactant, 12–2-12, and a negatively charged amphiphilic chalcone, C4SCh. The premise is to exploit the chalcone/flavylium interconversion to elicit a morphological change of the vesicles leading to the controlled release of an encapsulated drug. First, the phase behavior of the catanionic system is studied and the desirable composition yielding stable unilamellar vesicles identified and selected for further studies. The solutions containing vesicles (Dh ≈ 200 nm, ζ-potential ≈ 80 mV) are in-depth characterized by light microscopy, cryo-transmission electron microscopy (cryo-TEM), dynamic light scattering (DLS) and surface tension measurements. Upon subjecting the vesicles to UV irradiation (λ = 365 nm) at near neutral pH (≈ 6.0), no morphological effects are observed, yet when irradiation is coupled with pH = 3.0, the majority of the vesicles are disrupted into bilayer fragments. The anticancer drug doxorubicin (DOX) is successfully entrapped in the non-irradiated vesicles, yielding an encapsulation efficiency of ≈ 25% and a loading capacity of ≈ 3%. The release profile of the drug-loaded vesicles is then studied in vitro in four conditions: i) no stimuli (pH = 6.0); ii) irradiation, pH = 6.0; iii) no irradiation and adjusted pH = 3.0; iv) irradiation and adjusted pH = 3.0 Crucially, irradiation at pH = 3.0 leads to a sustained release of DOX to ca. 80% (within 4 h), whereas cases i) and ii) lead to only ≈ 25 % release and case iii) to 50% release but precipitation of the vesicles. Thus, our initial hypothesis is confirmed: we present a proof of concept delivery system where light and pH act as inputs of an AND logic gate mechanism for the controlled release of a relevant biomedical drug (output). This may prove useful if the irradiated nanocarriers meet acidified physiological environments such as tumors sites, endosomes or lysosomes.

Highly Robust Multilamellar Lipid Vesicles Generated through Intervesicular Self-Assembly Mediated by Hydrolyzed Collagen Peptides.

Despite the well-known advantages of lipid vesicles for drug and gene delivery, structural instability limits their practical applications and requires strictly regulated conditions for transport and storage. Chemical crosslinking and in situ polymerization have been suggested to increase the membrane rigidity and dispersion stability of lipid vesicles. However, such chemically modified lipids sacrifice the dynamic nature of lipid vesicles and obfuscate their in vivo metabolic fates. Here, we present highly robust multilamellar lipid vesicles through the self-assembly of preformed, cationic large unilamellar vesicles (LUVs) with hydrolyzed collagen peptides (HCPs). The cationic LUVs undergo vesicle-to-vesicle attachment and structural reorganization through polyionic complexation with HCPs, resulting in the formation of multilamellar collagen-lipid vesicles (MCLVs). The resulting MCLVs exhibit excellent structural stability against variations in pH and ionic strength and the addition of surfactants. Particularly, the MCLVs maintain their structural stability against repeated freeze-thaw stresses, proving the unprecedented stabilization effect of biological macromolecules on lipid lamellar structures. This work provides a practically attractive technique for the simple and quick fabrication of structurally robust lipid nanovesicles without covalent crosslinkers, organic solvents, and specialized instruments.

Vesicle‐to‐micelle transition in aqueous mixtures of cationic lipids with Pluronic F127

AbstractAqueous solutions of vesicle‐forming lipids mixed with micelle‐forming copolymers may result in stabilized and biocompatible aggregates. Differential scanning calorimetry (DSC) and dynamic light scattering (DLS) techniques were used here to investigate the effects of the nonionic triblock copolymer Pluronic F127 (F127) on the thermal behavior, structural changes, and hydrodynamic size of cationic vesicles from dioctadecyldimethylammonium chloride (DODAC), dioctadecyldimethylammonium bromide (DODAB), and didodecyldimethylammonium bromide (DDAB) in aqueous dispersion. The DSC thermograms indicate that upon the addition of up to 5.0 mM F127, a vesicle‐to‐micelle transition occurs in three stages. First, there is a predominance of lipid‐F127 mixed vesicles, followed by the co‐existence of mixed vesicles and micelles, and finally, the system is dominated by mixed micelles. DLS results reveal that with the addition of F127 to the lipid dispersions, the size of the assembled structures tends to decrease, also indicating structural changes of vesicles to micelles. These results indicate that the borders between these stages depend on the lipid chain length and counterion type.

Model Catanionic Vesicles from Biomimetic Serine-Based Surfactants: Effect of the Combination of Chain Lengths on Vesicle Properties and Vesicle-to-Micelle Transition

Mixtures of cationic and anionic surfactants often originate bilayer structures, such as vesicles and lamellar liquid crystals, that can be explored as model membranes for fundamental studies or as drug and gene nanocarriers. Here, we investigated the aggregation properties of two catanionic mixtures containing biomimetic surfactants derived from serine. The mixtures are designated as 12Ser/8-8Ser and 14Ser/10-10Ser, where mSer is a cationic, single-chained surfactant and n-nSer is an anionic, double-chained one (m and n being the C atoms in the alkyl chains). Our goal was to investigate the effects of total chain length and chain length asymmetry of the catanionic pair on the formation of catanionic vesicles, the vesicle properties and the vesicle/micelle transitions. Ocular observations, surface tension measurements, video-enhanced light microscopy, cryogenic scanning electron microscopy, dynamic and electrophoretic light scattering were used to monitor the self-assembly process and the aggregate properties. Catanionic vesicles were indeed found in both systems for molar fractions of cationic surfactant ≥0.40, always possessing positive zeta potentials (ζ = +35-50 mV), even for equimolar sample compositions. Furthermore, the 14Ser/10-10Ser vesicles were only found as single aggregates (i.e., without coexisting micelles) in a very narrow compositional range and as a bimodal population (average diameters of 80 and 300 nm). In contrast, the 12Ser/8-8Ser vesicles were found for a wider sample compositional range and as unimodal or bimodal populations, depending on the mixing ratio. The aggregate size, pH and zeta potential of the mixtures were further investigated. The unimodal 12Ser/8-8Ser vesicles (<DH> ≈ 250 nm, pH ≈ 7-8, ζ ≈ +32 mV and a cationic/anionic molar ratio of ≈2:1) are particularly promising for application as drug/gene nanocarriers. Both chain length asymmetry and total length play a key role in the aggregation features of the two systems. Molecular insights are provided by the main findings.

Catanionic Vesicles as a Facile Scaffold to Display Natural N-Glycan Ligands for Probing Multivalent Carbohydrate-Lectin Interactions.

Multivalent interactions are a key characteristic of protein-carbohydrate recognition. Phospholipid-based liposomes have been explored as a popular platform for multivalent presentation of glycans, but this platform has been plagued by the instability of typical liposomal formulations in biological media. We report here the exploitation of catanionic vesicles as a stable lipid-based nanoparticle scaffold for displaying large natural N-glycans as multivalent ligands. Hydrophobic insertion of lipidated N-glycans into the catanionic vesicle bilayer was optimized to allow for high-density display of structurally diverse N-glycans on the outer membrane leaflet. In an enzyme-linked competitive lectin-binding assay, the N-glycan-coated vesicles demonstrated a clear clustering glycoside effect, with significantly enhanced affinity for the corresponding lectins including Sambucus nigra agglutinin (SNA), concanavalin A (ConA), and human galectin-3, in comparison with their respective natural N-glycan ligands. Our results showed that relatively low density of high-mannose and sialylated complex type N-glycans gave the maximal clustering effect for binding to ConA and SNA, respectively, while relatively high-density display of the asialylated complex type N-glycan provided maximal clustering effects for binding to human galectin 3. Moreover, we also observed a macromolecular crowding effect on the binding of ConA to high-mannose N-glycans when catanionic vesicles bearing mixed high-mannose and complex-type N-glycans were used. The N-glycan-coated catanionic vesicles are stable and easy to formulate with varied density of ligands, which could serve as a feasible vehicle for drug delivery and as potent inhibitors for intervening protein-carbohydrate interactions implicated in disease.

Evaluating methods to create protein functionalized catanionic vesicles.

Catanionic surfactant vesicles (SVs) composed of sodium dodecylbenzenesulfonate (SDBS) and cetyltrimethylammonium tosylate (CTAT) have potential applications as targeted drug delivery systems, vaccine platforms, and diagnostic tools. To facilitate these applications, we evaluated various methods to attach proteins to the surface of SDBS/CTAT vesicles. Acid phosphatase from wheat germ was used as a model protein. Acid phosphatase was successfully conjugated to vesicles enriched with a Triton-X 100 derivative containing an unsaturated ester. Enzymatic activity of acid phosphatase attached to vesicles was assessed using an acid phosphatase assay. Results from the acid phosphatase assay indicated that 15 ± 3% of the attached protein remained functional but the presence of vesicles interferes with the assay. DLS and zeta potential results correlated with the protein functionalization studies. Acid phosphatase functionalized vesicles had an average diameter of 175 ± 85 nm and an average zeta potential of -61 ± 5 mV in PBS. As a control, vesicles enriched with Triton-X 100 were prepared and analyzed by DLS and zeta potential measurements. Triton X-100 enriched vesicles had an average diameter of 140 ± 67 nm and an average zeta potential of -49 ± 2 mV in PBS. Functionalizing the surface of SVs with proteins may be a key step in developing vesicle-based technologies. For drug delivery, antibodies could be used as targeting molecules; for vaccine formulation, functionalizing the surface with spike proteins may produce novel vaccine platforms.

Understanding and optimising the transfection of lipopolyplexes formulated in saline: the effects of peptide and serum.

Lipopolyplexes (LPDs) are of considerable interest for use as gene delivery vehicles. Here LPDs have been prepared from cationic vesicles (composed of a 1 : 1 molar ratio of DOTMA with the neutral helper lipid, DOPE), singly branched cationic peptides and plasmid DNA. All peptides contained a linker sequence (cleaved by endosomal furin) attached to a targeting sequence selected to bind human airway epithelial cells and mediate gene delivery. The current study investigates the effects of novel Arg-containing cationic peptide sequences on the biophysical and transfection properties of LPDs. Mixed His/Arg cationic peptides were of particular interest, as these sequences have not been previously used in LPD formulations. Lengthening the number of cationic residues in a homopolymer from 6 to 12 in each branch reduced transfection using LPDs, most likely due to increased DNA compaction hindering the release of pDNA within the target cell. Furthermore, LPDs containing mixed Arg-containing peptides, particularly an alternating Arg/His sequence exhibited an increase in transfection, probably because of their optimal ability to complex and subsequently release pDNA. To confer stability in serum, LPDs were prepared in 0.12 M sodium chloride solution (as opposed to the more commonly used water) yielding multilamellar LPDs with very high levels of size reproducibility and DNA protection, especially when compared to the (unilamellar) LPDs formed in water. Significantly for the clinical applications of the LPDs, those prepared in the presence of sodium chloride retained high levels of transfection in the presence of media supplemented with fetal bovine serum. This work therefore represents a significant advance for the optimisation of LPD formulation for gene delivery, under physiologically relevant conditions, in vivo.

Protein-induced transformation of unilamellar to multilamellar vesicles triggered by a polysaccharide

We report on the morphological transitions of didodecyldimethylammonium bromide (DDAB) cationic vesicles and hybrid DDAB/hyaluronic acid (HA) vesicles upon addition of BSA at pH 7 where BSA is overall negatively charged. Small angle neutron scattering (SANS) is used to extract the size distributions of the nanovesicles, the thickness of the DDAB bilayers and their lamellarity. Although the HA-decorated DDAB vesicles contain the negatively charged polysaccharide the interaction with BSA appears to be more intense in comparison to bare vesicles. Characteristic peaks in the SANS patterns indicate the presence of multilamellar interfaces while the formation of multilamellar vesicles induced by BSA depends on the amount of added HA. Consequently, higher lamellarities are observed at higher BSA contents. This work demonstrates a simple methodology to tune the encapsulation of globular proteins in vesicular nanoassemblies by affecting their lamellarity and has direct implications on the application of vesicles and liposomes in protein delivery.

Catanionic vesicles and their complexes with hyaluronan – A way how to tailor physicochemical properties via ionic strength

This article offers a comprehensive description of how a change in ionic strength influences the physicochemical properties of dilute solutions of catanionic vesicular systems. Catanionic vesicles are formed from HTMA-DS (hexadecyltrimethylammonium-dodecyl sulphate) ion pair amphiphiles, which were doped by cholesterol and positively charged double-chained surfactant. Due to this positive charge, they can interact with oppositely charged polymers, such as hyaluronan, to form hyaluronan-coated vesicles. Vesicle kinetic stability can be affected by changes in the ionic strength of the environment, which are represented by the addition of sodium chloride. In our study, with the increasing addition of salt, the ζ-potential, as the main parameter of kinetic stability, decreased to zero both for coated and uncoated vesicles. Furthermore, the size of vesicles increased above a concentration of 15 mM NaCl. The membrane rigidity represented by fluorescence anisotropy, of uncoated vesicles decreased rapidly, and slight dehydration of their outer part was observed, which was confirmed by high resolution ultrasonic spectroscopy. Hyaluronan-coated vesicles formed visible aggregates with gradual additions of salt, which were subsequently disintegrated, the degree of disintegration varying for different polymer concentrations. The viscosity of the whole system also decreased significantly with increasing salt concentration.