Adsorption Of Cationic Dyes Research Articles

Fabrication of depth-controlled dimples on polymer microsphere and capturing of nano-sized objects

Polymer microspheres containing submicron-sized surface dimples were prepared through the acid-dissolving removal of silica nanoparticles as templates from the surface of core-shell microspheres, which were prepared by modified suspension polymerization of a silica nanoparticle-dispersed polymerizable monomer mixture (methyl methacrylate and divinylbenzene dispersing). We demonstrated depth control of the dimples on the surface of polymer microspheres and evaluated their capturing properties. The depth of the dimples could be facilely controlled by changing the surface polarity of silica nanoparticles (1 µm) as templates during the synthesis of the core-shell microspheres. The depth of the prepared dimples ranged from 250 to 810 nm, and the gate diameter of the dimple was related to its depth owing to the spherical shape of the template. The inner surfaces of the dimples were evaluated based on the adsorption of cationic and anionic fluorescent dyes. Confocal laser microscopy observations indicated that the inner surfaces of the dimples were densely stained with both fluorescent dyes, whereas the outer surfaces of the microspheres were not stained, suggesting that the inner surfaces of the dimples were more hydrophobic. Silica particles smaller than the gate diameter of the dimple were crammed (or jammed) into the inner space of the dimple, and the captured silica particles did not drop off even after washing with water more than five times. Because the larger silica nanoparticles could not be trapped, the dimples could selectively capture the nanosized objects in their inner space.

A novel biosorbent from raw pomegranate peel modified with SnCl2/FeCl2 for the adsorption of crystal violet cationic dye: response surface methodology process optimization, thermodynamic, kinetic, isotherm, and recyclability studies

A novel biosorbent from raw pomegranate peel modified with SnCl2/FeCl2 for the adsorption of crystal violet cationic dye: response surface methodology process optimization, thermodynamic, kinetic, isotherm, and recyclability studies

Fabrication of Monodisperse Magnetic Polystyrene Mesoporous Composite Microspheres for High-Efficiency Selective Adsorption and Rapid Separation of Cationic Dyes in Textile Industry Wastewater.

Sustainable development has become an inevitable trend in the world's green chemical industry for a generation or more. In this study, a monodisperse magnetic polystyrene mesoporous composite microsphere (MPPS) composed of Fe3O4 nanoparticles loaded on polystyrene mesoporous microspheres is introduced. These microspheres serve as effective adsorbents for the swift removal of cationic dyes. The fabrication of the wastewater adsorbent, with its simple operation and economic practicality, involved a combination of dispersion polymerization, a sulfonation reaction, two-step swelling polymerization, and in situ alkaline oxidation technology. Notably, the adsorption capacity within 3 min reaches 184.0 mg/g, with an impressive adsorption efficiency of 92%. This is primarily attributed to the high specific surface area (Smax) of the MPPS providing more reaction sites for π-π interaction. Simultaneously, the attractive force between negatively charged sulfonic acid groups and cationic dyes is enhanced through surface modification of the MPPS. Furthermore, the MPPS, boasting a maximum saturation magnetization of 38.19 emu/g, ensures rapid separation from the solution for recycling within 3 s. Even after 5 cycles, the adsorption efficiency remains over 90%. The rapid separation of dyes is facilitated by the magnetic attraction of Fe3O4 nanoparticles from the MPPS under the application of a magnetic field. These composite mesoporous materials exhibit outstanding performance in both efficient selective adsorption and recyclability, presenting a novel green adsorbent with promising prospects for sustainable development. This innovation is poised to excel in fields such as sewage treatment, separation, and purification.

One‐Step Synthesis of Thiol‐Functional Mesoporous Silica Nanospheres and Selective Removal of Cationic Dyes

AbstractThe surface characteristics of nanoparticles have a huge impact on adsorption effects. In this paper, thiol‐functional mesoporous silica nanospheres (MSNs−SH) are successfully prepared through simple one‐step hydrolysis and co‐condensation of tetraethyl orthosilicate and (3‐mercaptopropyl) triethoxysilane with hexadecyltrimethylammonium bromide and sulfobetaine 12 as dual‐template. The obtained MSNs−SH have high surface area (1260 m2 g−1), accessible mesopores (2.2 nm), great pore volume (1.7 cm3 g−1), and uniform adjustable diameter (90 nm). Furthermore, the diameter and pore‐size of MSNs−SH can be controlled via adjusting the ethanol content in the synthesis system. MSNs−SH exhibit a fast adsorption kinetics, marked adsorption capacity of cationic rhodamine B (RB 534.2 mg g−1), and remarkable selective adsorption for cationic dyes. Theoretical analysis reveals the adsorption behavior of RB on MSNs−SH follows the Langmuir isotherm models and pseudo‐second‐order kinetic. Additionally, the thermodynamic results indicate that the adsorption process is a spontaneous process driven by temperature. The results demonstrate that MSNs−SH are greatly potential for effectively removing cationic dyes from wastewater, with the advantages of simple preparation, high adsorption performance and perfect selectivity.

Sustainable Conversion of Waste Carbon Brush and Fly Ash into a Novel Nanocomposite for Selective Adsorption of Cationic Dyes

Sustainable Conversion of Waste Carbon Brush and Fly Ash into a Novel Nanocomposite for Selective Adsorption of Cationic Dyes

Comparative adsorption of cationic and anionic dye by using non-activated Black Plum seed biochar for aquatic phase: Isotherm, kinetic and thermodynamic studies

Industrial dye effluents play a major role in water pollution. Textile and leather industries are one of the important sectors that pollute the water by discharging many harmful cationic and anionic dyes during the dyeing process. This study aims to compare the dye removal efficiency of Black Plum seed biochar for the cationic and anionic dyes. The non-activated biochar was prepared through pyrolysis of Black Plum seed powder at 5700 C. The sample's surface chemistry was understood using various characterization techniques like Field Emission Scanning Electron Microscopy (FESEM), Energy-dispersive X-ray spectroscopy (EDS), Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), Raman-Spectroscopy and Zeta-potential. The experiments were successfully performed by conducting a batch adsorption study at different parameters such as pH, concentration, contact time and temperature. The coefficients of different isotherms and kinetics models were evaluated for non-linear study and the thermodynamic model was also applied. The maximum adsorption capacity was obtained as 42.39 mg/g for Crystal Violet (CV) dye and 6.22 mg/g for Eosin Blue (EB) dye by using the Langmuir isotherm model. Hence, the Black Plum seed biochar (BPSB) has superior adsorption capacity for the cationic dye CV ( removal - 98%) as compared to the anionic dye EB ( removal - 65%) at optimum parameters. Therefore, it is concluded that the BPSB is a natural toxin-free biosorbent and it can be used for the remediation of dyes from industrial wastewater.

A Sustainable Approach for Enhancing Cationic Dyes Adsorption in Single and Multiple Systems using Novel Nano Ferrites Modified with Walnut Shell

AbstractWalnut shell has been used in various experimental studies for different dyes removal, but it is exciting to study the adsorption behaviour of bio‐waste (walnut shell) in combination with spinel zinc ferrite which resulted in the formation of a novel material having magnetic properties and help in easy separation after the wastewater treatment. Novel magnetic walnut shell zinc ferrite (WSZF) composite has been synthesized and used to remove Malachite Green and Methylene Blue from aqueous solution in single and binary dye systems. Different techniques have been used to characterize the composite such as Fourier Transform Infrared Spectroscopy, X‐Ray Diffraction, Field Emission Scanning Electron Microscopy, Energy Dispersive Spectroscopy, Thermogravimetric Analysis and pHzpc. Adsorption of dyes were studied to see the effect of time, pH, adsorbent dose, dye concentration and temperature. The Lagergren pseudo second order model fitted well among various kinetic models employed. Langmuir adsorption isotherm best fitted with maximum adsorption capacities of 86.20 and 169.5 mg/g in single dye and 23.92 and 18 mg/g respectively in binary dye system for Malachite Green and Methylene Blue. Process was spontaneous and ΔH° were found positive, confirmed endothermic process of adsorption. The composite‘s regeneration capacity was studied for five cycles and at the end of five cycle the efficiency of the material was found to be around 80 % for both single as well as binary dye systems. It is concluded that the chosen WSZF will be the optimum solution for cationic dyes removal.

Supramolecular Gels Based on C3-Symmetric Amides: Application in Anion-Sensing and Removal of Dyes from Water.

We modified C3-symmetric benzene-1,3,5-tris-amide (BTA) by introducing flexible linkers in order to generate an N-centered BTA (N-BTA) molecule. The N-BTA compound formed gels in alcohols and aqueous mixtures of high-polar solvents. Rheological studies showed that the DMSO/water (1:1, v/v) gels were mechanically stronger compared to other gels, and a similar trend was observed for thermal stability. Powder X-ray analysis of the xerogel obtained from various aqueous gels revealed that the packing modes of the gelators in these systems were similar. The stimuli-responsive properties of the N-BTA towards sodium/potassium salts indicated that the gel network collapsed in the presence of more nucleophilic anions such as cyanide, fluoride, and chloride salts at the MGC, but the gel network was intact when in contact with nitrate, sulphate, acetate, bromide, and iodide salts, indicating the anion-responsive properties of N-BTA gels. Anion-induced gel formation was observed for less nucleophilic anions below the MGC of N-BTA. The ability of N-BTA gels to act as an adsorbent for hazardous anionic and cationic dyes in water was evaluated. The results indicated that the ethanolic gels of N-BTA successfully absorbed methylene blue and methyl orange dyes from water. This work demonstrates the potential of the N-BTA gelator to act as a stimuli-responsive material and a promising candidate for water purification.

Zinc oxide decorated plantain peel activated carbon for adsorption of cationic malachite green dye: Mechanistic, kinetics and thermodynamics modeling

Reports have shown that malachite green (MG) dye causes various hormonal disruptions and health hazards, hence, its removal from water has become a top priority. In this work, zinc oxide decorated plantain peels activated carbon (ZnO@PPAC) was developed via a hydrothermal approach. Physicochemical characterization of the ZnO@PPAC nanocomposite with a 205.2 m2/g surface area, porosity of 614.68 and dominance of acidic sites from Boehm study established the potency of ZnO@PPAC. Spectroscopic characterization of ZnO@PPAC vis-a-viz thermal gravimetric analyses (TGA), Fourier Transform Infrared Spectroscopy (FTIR), Powdered X-ray Diffraction (PXRD), Scanning Electron Microscopy and High Resolution – Transmission Electron Microscopy (HR-TEM) depict the thermal stability via phase transition, functional group, crystallinity with interspatial spacing, morphology and spherical and nano-rod-like shape of the ZnO@PPAC heterostructure with electron mapping respectively. Adsorption of malachite green dye onto ZnO@PPAC nanocomposite was influenced by different operational parameters. Equilibrium data across the three temperatures (303, 313, and 323 K) were most favorably described by Freundlich indicating the ZnO@PPAC heterogeneous nature. 77.517 mg/g monolayer capacity of ZnO@PPAC was superior to other adsorbents compared. Pore-diffusion predominated in the mechanism and kinetic data best fit the pseudo-second-order. Thermodynamics studies showed the feasible, endothermic, and spontaneous nature of the sequestration. The ZnO@PPAC was therefore shown to be a sustainable and efficient material for MG dye uptake and hereby endorsed for the treatment of industrial effluent.

Decolourization of Methylene Blue by using Eucalyptus Globulus Leaf Powder as a Adsorbent

In the present study, the feasibility of using low-cost adsorbent Eucalyptus Globulus leaf powder for the cationic dyes adsorption from aqueous solutions have been investigated. Batch adsorption studies are conducted to study conducted to the different parameters are adsorbent dosage of 2-20 g/L, initial dye concentration of 50-250 mg /L, Temperature of 293oK, 303 oK and 313 oK on adsorption of methylene blue dye at equilibrium time of 80 minutes respectively and optimal pH of 5.0. The equilibrium data is analysed with isotherm models are Langmuir and Freundlich and kinetic models are Pseudo-first order, Pseudo-second order model. The adsorption equilibrium and kinetic data fitted well to Freundlich isotherm model for methylene blue dye and Pseudo-second order model for methylene blue dyes. The adsorption is an Endothermic and it is energetically favourable adsorption. The result demonstrates that Eucalyptus Globulus leaf powder could be employed as effective and low-cost adsorbent for the removal of methylene blue and from aqueous solutions.

Melamine Network as a Solution for Significant Enhancement of the Mechanical, Adsorptive, and Surface Properties in a Novel Carbon Nanomaterial-Silica Aerogel Composite.

Silica aerogels exhibit exceptional characteristics such as mesoporosity, light weight, high surface area, and pore volume. Nevertheless, their utilization in industrial settings remains constrained due to their brittleness, moisture sensitivity, and costly synthesis procedure. Several studies have proved that adding nanofillers, such as carbon nanotubes (CNT) or graphene nanoplatelets (GNP), can improve the mechanical strength of the aerogels. The incorporation of nanofillers is often accompanied by agglomeration and pore blockage, which, in turn, deteriorates the surface area, pore volume, and low density. Including flexible melamine foam (MF) as a scaffold for the silica aerogel and nanofiller composite can prevent the restacking of the nanofillers through π-π interaction, hence maintaining the incredible properties of aerogels and improving their mechanical properties. CNT, GNP, and the polymeric silica precursor, polyvinyltrimethoxysilane (PVTMS), were added to a MF, at varying concentrations, to fabricate the MF-aerogel nanocomposites. Surfactant and sonication were utilized to ensure a homogeneous dispersion of the nanofillers in the system. The presence of MF prevented the agglomeration of nanofillers, resulting in lower density and relatively higher surface properties (SBET up to 929 m2·g-1 and pore volume up to 4.34 cc·g-1). Moreover, the MF-supported samples could endure 80% strain without breakage and showed an outstanding compressive strength of up to ∼20 MPa. These aerogel nanocomposites also demonstrated an excellent volatile organic compound (∼2680 mg·g-1) and cationic dye adsorption (∼10 mg·g-1).

Carbon encapsulated ZnO nanoplates for efficient removal of organic dyes from aqueous medium by adsorption: Role of organic ligand and calcination temperature

Water pollution by organic dyes poses great challenge to the environment as well as living organisms. Herein, we have fabricated nanoplates of ZnO in carbon matrix by controlled calcination of zinc-metal organic frameworks (Zn-MOFs) and used as adsorbents for efficient removal of organic dyes from water. Zn-MOF of phthalic acid and 5-nitrophthalic acid produced nanoplates of ZnO (ZnO-C and ZnO-NC) in carbon matrix without and with nitrogen doping. The fabricated hybrid nanostructures were characterized using PXRD, FTIR, BET, TGA, HR-SEM, HR-TEM and XPS analysis. Both ZnO-C and ZnO-NC showed high adsorption of cationic dyes (crystal violet (CV), methylene blue (MB) and Rhodamine B (Rh B)) compared to anionic dyes (methyl orange (MO) and Eosin yellow (EY)). Nitrogen doped ZnO-NC exhibited relatively higher percentage of dyes removal (99 %) compared to ZnO-C. Interestingly, ZnO-NC showed high adsorption of MB dye across the pH range from acidic (pH = 3.0) to alkaline (pH = 11.0). The zero-point charge indicated the negative surface charge for ZnO-NC/ZnO-C that facilitated electrostatic interactions between dyes and adsorbents. Adsorption kinetics suggested a pseudo second order model and adsorption isotherm fitted well with the Freundlich model, suggesting heterogenous adsorption with multilayer coverage of dye molecules. The reusability of ZnO-NC showed only slight reduction of adsorption in three successive cycles. Further, ZnO-NC was used as column packing materials for the successful removal of both cationic as well as anionic dyes upon filtration. Thus, the present studies provided insight on the organic ligand structure and calcination temperature of MOFs for transforming them into effective organic dye adsorbent.

Governing the Porosity and Morphology of Zeolitic Imidazolate Framework-Derived Functional Carbons toward Improved Adsorption of Cationic Dyes

Governing the Porosity and Morphology of Zeolitic Imidazolate Framework-Derived Functional Carbons toward Improved Adsorption of Cationic Dyes

Thermodynamic interpretation of cationic dye adsorption onto untreated coffee residues as adsorbents via statistical physics approach

In this current paper, we perform a theoretical examination of adsorption systems undertaken through the application of statistical physics modeling to experimental data Remacryl Red TGL (BR) dye adsorption isotherms onto the untreated coffee residues (UCR) based adsorbents at 298–338 K range. The experimental values exhibited a strong agreement with the predicted values, and the developed model received high approval. Significant parameters are theoretically discussed such as thermodynamic, energetic, and stereographic factors which determine the (BR) adsorption onto UCR. In the pursuit of unraveling the adsorption mechanism, four different models are adopted: a monolayer with one energy (Model 1), a monolayer with two horizontal energies (Model 2), a monolayer with three energies (Model 3) and a double-layer with two vertical energies (Model 4). The analysis considered both steric and energetic parameters associated with the adsorption reaction, namely the number of adsorbed particles per site (n1 and n2), the receptor sites density (N1m and N2m), and the concentration at half-saturation. It appears that the experimental data aligns well with a monolayer model characterized by two energy states. The variations in these factors are examined in relation to the temperature of absorption isotherms. More importantly, the calculation of adsorption energies unequivocally pointed out that the adsorption process is of a chemisorptive nature. Our findings indicate that (UCR) could be utilized as a low-cost alternative adsorbent in wastewater treatment to eliminate the Remacryl Red TGL (BR) dye.

Nanocellulose-based composite beads as the amphoteric adsorbent for effective adsorption of cationic and anionic dyes

Nanocellulose-based composite beads as the amphoteric adsorbent for effective adsorption of cationic and anionic dyes

Magnetic, Biocompatible and Biodegradable Carboxymethyl Cellulose‐Based Hydrogel for Cationic Dye Adsorption

AbstractEnsuring the availability of water resources that are both clean and safe is crucial for the preservation of environmental health and the well‐being of humans. Here, we fabricated carboxymethyl cellulose‐based hydrogel nanocomposite using acrylic acid (AA) and 2‐acrylamido‐2‐methylpropane sulfuric acid (AMPS) monomers and Fe3O4 nanoparticles through a free radical crosslinking process for adsorption of dyes from contaminated water. The synthesized nanocomposite hydrogel was characterized using various techniques, including TEM, XRD, FTIR, SEM‐EDS, TGA, and AFM analysis. The swelling capacity of samples in an aqueous medium at multiple pH levels and the presence of different salts were investigated. The adsorption efficiency of methylene blue (MB) and crystal violet (CV), emphasizing the effect of hydrogel concentration and the medium's pH, was studied. It was concluded that the hydrogel sample containing 17 % AMPS and 51 % AA had better swelling capacity and dye removal efficiency. The dye adsorption kinetics data were fitted to pseudo‐first and second‐order kinetic models and the Langmuir and Temkin isotherm models. The maximum adsorption capacity for MB and CV was 53.97 and 53.57 mg/g, respectively. It was revealed that the pseudo‐second‐order kinetic model could best describe adsorption (qe=79.2 mg/g for MB and qe=65.8 mg/g for CV). The intra‐particle diffusion model was found to be the rate‐limiting mechanism of dye adsorption. Thermodynamic studies proposed that the adsorption of MB and CV was spontaneous and endothermic. Additionally, magnetic nanocomposite hydrogel‘s reusability up to four successive cycles further determines its probability of adsorption of dyes from wastewater.

Sustainable Bio-Based Adsorbents for Simultaneous and Efficient Removal of Hazardous Dyes from Aqueous Solutions.

Dyes provide a notable environmental issue as a result of their intrinsic poisonous and carcinogenic characteristics. An estimated 60,000 metric tons of dyes has been discharged into the environment, leading to a substantial increase in water pollution. The mitigation of these dyes is a substantial and intricate challenge. The primary objective of this research is to conduct a comprehensive analysis of the adsorption of cationic dyes containing positively charged groups such as sulphonates, amines, and triphenylmethanes. The adsorption study was carried out using four different low-cost adsorbents derived from biowaste, specifically Groundnut Shell (GS), Mosambi Peel (MP), Mango Bark (MBARK), and Mango Leaves (ML). The adsorbent materials were characterized using FTIR, UV-Vis spectroscopy, scanning electron microscopy (SEM), point-of-zero charge (PZC), and BET techniques. The adsorption capacity was found to be between 1.5 and 2.2 mg/gm for Groundnut Shell, Mosambi Peel, Mango Bark, and Mango Leaves for individual dye removal (Crystal violet, Methylene blue, Rhodamine B, and Malachite green). It was observed that adsorbent derived from mango bark showed excellent adsorption (%) in a mono-component dye system and, thus, was explored for the simultaneous removal of a mixture of the same dyes. MBARK exhibited an excellent overall dye removal efficiency of 94.44% (Qe = 2.7 mg/g) for the dye mixture in 60 min. From a detailed kinetic investigation, it was concluded that the adsorption followed the pseudo-second-order model (R2= 0.99963 to 1 for different dyes and adsorbents) hinting at chemisorption. The effect of the pH of the analyte solution and the dosage of adsorbent was also studied for simultaneous removal. The isothermal studies demonstrated that the Langmuir adsorption model (R2 = 0.99416) was the best-fitted model, suggesting monolayer adsorption. The adsorption process was predicted to be governed by ion exchange, electrostatic interaction, hydrogen bonding, pi-pi interaction, etc., based on charge, functional groups, and pH of dyes and adsorbent. Thus, this study highlights the application of low-cost biowaste as a potential adsorbent for the mitigation of toxic industrial dyes present in wastewater.

κ‐Carrageenan/poly(sodium styrenesulfonate‐co‐acrylic acid) macroporous anionic monoliths: Dye adsorption and oil–water separation properties

Abstractκ‐Carrageenan (κC) is a widely used food hydrogel, but its use as an environmental adsorption separation material still needs to be further developed. Herein, a novel macroporous anionic monolith was synthesized by the oil‐in‐water high internal phase emulsion template method. The monolith was obtained by the continuous phase polymerization of sodium styrenesulfonate (NaSS) and acrylic acid (AA), in which κC was introduced to form a semi‐interpenetrating network structure to improve its overall performance. The results showed that the mechanical strength of the monolith increased with κC content. Because of the use of two strong hydrophilic monomers, NaSS and AA, the porous monolith proved to be superoleophobic underwater. In addition, the porous materials had a strong cationic dye adsorption capacity (2455 mg/g for malachite green, 1180 mg/g for methylene blue) and a fast removal rate, good reusability, and oil–water separation. This work highlights their potential application value in the purification of complex water environments.

Synthesis of multifunctional mesoporous geopolymer under hydrothermal curing: High mechanical resistance and efficient removal of methylene blue from aqueous medium

This study created green multifunctional geopolymeric sorbent material with strong cationic dye adsorption capacity and superior mechanical strength to broaden lead sludge (LS)-based geopolymer applications. In this study, two geopolymeric sorbents (Go and G) were fabricated using slag blended with 0 and 50 wt% LS, respectively and activated with 6 wt% NaOH. The Go and G specimens were normally cured for up to 28 days, while G specimens were hydrothermally cured at different steam-pressures to modify/improve histological characteristics as well as mechanical resistance. The selected sorbents were characterized via XRD, FTIR, TGA/DTG, XPS, N2-adsorption/desorption and SEM/EDX techniques. G/5 bar′s high strength and adsorption capacity may be due to the production of CSH, CAH, CASH, and NASH, which formed a fine mesoporous zeolitic structure with the highest BET-surface area (64.55 m2/g) and lowest BJH-maximum pore diameter (9.68 nm). The maximum MB adsorption capacity of the synthesized adsorbent was 230.4 mg/g.

Application of Corn Straw, an Agro-Waste, to Remove Dyes in an Aqueous Medium, Producing Blue or Red Fibers

The contaminant dyes that, even at low concentrations, may cause a series of adverse effects in humans and animals, and their removal by adsorption methods using alternative adsorbents as natural fibers, are regarded as a research topic that has become increasingly relevant. In this study, corn straw (CS), an agro-industrial residue, was used to remove dyes. The samples were characterized by ATR-FTIR, SEM-EDS, zeta potential, diffuse spectra, and colorimetry, before and after dye removal. The analyses allowed us to differentiate the morphology of CS after the treatment’s fiber on the adsorbent surface. The zeta potential showed a negative surface charge, but the acidic or alkaline treatment affected the surface charge of the sample, influencing the adsorption of cationic or anionic dyes. Adsorption data presented an increased removal when alkaline treatment was applied for the methylene blue (MB; qmax = 16.7 mg g−1), and the acid treatment was more effective for the Congo red (CR; qmax = 2.13 mg g−1). After color stability tests, it was observed that the anionic dye CR was more easily desorbed due to the surface charge of the adsorbent. Due to the chemical treatment, corn straw proved to be a good sustainable adsorbent for removing anionic or cationic dyes from aqueous media, contributing directly to the objective of sustainable development (#6—drinking water and sanitation) and with SDG numbers 3, 11, 12, 14, and 17.