Cationic Bis Research Articles

Modulation between capacitor and conductor for a redox-active 2D bis(terpyridine)cobalt(II) nanosheet via anion-exchange

Ionic polymers are intriguing materials whose functionality arises from the synergy between ionic polymer backbones and counterions. A key method for enhancing their functionality is the post-synthetic ion-exchange reaction, which is instrumental in improving the chemical and physical properties of polymer backbones and introducing of the functionalities of the counterions. Electronic interaction between host polymer backbone and guest ions plays pivotal roles in property modulation. The current study highlights the modulation of responses to external electric field in cationic bis(terpyridine)cobalt(II) polymer nanofilms through anion-exchange reactions. Initially, as-prepared chloride-containing polymers exhibited supercapacitor behaviour. Introducing anionic metalladithiolenes into the polymers altered the behaviour to either conductive or insulative, depending on the valence of the metalladithiolenes. This modulation was accomplished by fine tuning of charge-transfer interactions between the bis(terpyridine)cobalt(II) complex moieties and redox-active anions. Our findings open up new avenue for ionic polymers, showcasing their potential as versatile platform in materials science.

Cationic Bis(hydrosilane)-Coinage-Metal Complexes: Synthesis, Characterization, and Use as Catalysts for Outer-Sphere C=O Hydrosilylation Not Involving Metal Hydrides.

The preparation of cationic bis(hydrosilane)-coinage-metal complexes by chloride abstraction from the neutral metal chloride precursors with Na[BArF 4] is described. Unlike previously reported hydrosilane-stabilized copper and silver complexes, the presented complexes are cationic and feature two bidentate (ortho-silylphenyl)phosphine ligands. These complexes were fully characterized by NMR spectroscopy and X-ray diffraction analysis, revealing that both Si-H bonds are activated by the Lewis acidic cationic metal center. The new complexes were found to be effective in catalytic carbonyl hydrosilylation, leading to the corresponding silyl ethers under mild conditions without the addition of an external base. Combined mechanistic control experiments and quantum chemical calculations support an ionic outer-sphere mechanism, in which a neutral metal alkoxide species instead of a metal hydride is the key intermediate that interacts with the silylcarboxonium ion to generate the silyl ether.

Cationic Bis(hydrosilane)−Coinage Metal Complexes: Synthesis, Characterization, and Use as Catalysts for Outer‐Sphere C=O Hydrosilylation Not Involving Metal Hydrides

The preparation of cationic bis(hydrosilane)–coinage‐metal complexes by chloride abstraction from the neutral metal chloride precursors with Na[BArF4] is described. Unlike previously reported hydrosilane‐stabilized copper and silver complexes, the presented complexes are cationic and feature two bidentate ortho‐(silylphenyl)phosphine ligands. These complexes were fully characterized by NMR spectroscopy and X‐ray diffraction analysis, revealing that both Si–H bonds are activated by the Lewis acidic cationic metal center. The new complexes were found to be effective in catalytic carbonyl hydrosilylation, leading to the corresponding silyl ethers under mild conditions without the addition of an external base. Combined mechanistic control experiments and quantum chemical calculations support an ionic outer‐sphere mechanism, in which a neutral metal alkoxide species instead of a metal hydride is the key intermediate that interacts with the silylcarboxonium ion to generate the silyl ether.

Cationic Bis(Gold) Indenyl Complexes.

Reaction of (P)AuOTf [P=P(t-Bu)2o-biphenyl] with indenyl- or 3-methylindenyl lithium led to isolation of gold η1-indenyl complexes (P)Au(η1-inden-1-yl) (1 a) and (P)Au(η1-3-methylinden-1-yl) (1 b), respectively, in >65 % yield. Whereas complex 1 b is static, complex 1 a undergoes facile, degenerate 1,3-migration of gold about the indenyl ligand (ΔG≠ 153K=9.1±1.1 kcal/mol). Treatment of complexes 1 a and 1 b with (P)AuNTf2 led to formation of the corresponding cationic bis(gold) indenyl complexes trans-[(P)Au]2(η1,η1-inden-1,3-yl) (2 a) and trans-[(P)Au]2(η1,η2-3-methylinden-1-yl) (2 b), respectively, which were characterized spectroscopically and modeled computationally. Despite the absence of aurophilic stabilization in complexes 2 a and 2 b, the binding affinity of mono(gold) complex 1 a toward exogenous (P)Au+ exceed that of free indene by ~350-fold and similarly the binding affinity of 1 b toward exogenous (P)Au+ exceed that of 3-methylindene by ~50-fold. The energy barrier for protodeauration of bis(gold) indenyl complex 2 a with HOAc was ≥8 kcal/mol higher than for protodeauration of mono(gold) complex 1 a.

Tetrahydroisoquinoline-Triazole Derivatives: Novel Nicotinamide N-Methyltransferase Inhibitors

Through the Lilly Open Innovation Drug Discovery program (OIDD), we discovered five cationic bis(aryltriazol-4-yl)methyl)-6,7-dimethoxytetrahydroisoquinolinium derivatives that effectively inhibit human nicotinamide N-methyltransferase. Compounds 4a, 4c, and 4f demonstrated activity against hNNMT in enzymatic-based testing, with IC50 values of 3.177 μM, 7.9 μM, and 4.477 μM, respectively. In cell-based testing, 4c and 4f inhibited the enzyme in HEK293 cells with an IC50 value of 2.81 μM and 1.97 μM. Compound 4m inhibited hNNMT in the enzymatic-based assay by 98% at a concentration of 10 μM, with IC50 of 1.011 μM in the cell-based assay. Through structure-activity relationship analysis, we found that the active compounds had electron-withdrawing substituents at the 4-position of the phenyl-triazole, while compounds containing bulky and electron-donating groups at the same position did not display any activity. The results of docking studies using AutoDock 4.2 showed that all active compounds had similar binding patterns at the NNMT active site. They occupied the nicotinamide binding site and about two-thirds of the S-adenosyl-L-methionine site. However, the SAR and docking results of 4g contradicted the compound’s inactivity. Nevertheless, the molecular docking studies provided insight into how the ligands interact with the protein and explained the activity of our compounds.

Metal-ligand interactions in a redox active ligand system. Electrochemistry and spectroscopy of [M(dipyvd)2]n+ (M=Zn, Ni, n=0, 1, 2).

Reaction of nickel and zinc triflates with the tridentate leucoverdazyl 1-isopropyl-3,5-di (2'-pyridyl)-6-oxo-2H-tetrazine (dipyvdH) and triethylamine resulted in the neutral coordination compounds M(dipyvd)2 (M = Ni,Zn). In acetonitrile, both compounds undergo two one electron oxidation processes, Zn (dipyvd)2at -0.28V and -0.12V and Ni(dipyvd)2at -0.32V and -0.15V vs ferrocene/ferricenium. Oxidations are ligand based resulting in an intermediate mixed valence species and a cationic bis(verdazyl) compound respectively. Oxidation of the ligand changes a localized, antiaromatic, non-planar 8π electron anion to a planar, delocalized 7π electron radical. The change in ligand structure results in an increase in the octahedral ligand field splitting from 10,500cm-1 to ∼13,000cm-1, suggesting an increase in the pi acceptor character of the ligand. In the mixed valence species, spectroscopic data suggests minimal interaction between ligands mediated by the metal center; i.e., these are class I-II systems in the Robin-Day classification.

C(sp3)–C(sp2) Reductive Elimination versus β-Hydride Elimination from Cobalt(III) Intermediates in Catalytic C–H Functionalization

The cationic bis(phosphine) cobalt(I) arene complex, [(depe)Co(η6-C7H8)][BAr4F] (depe = 1,2-bis(diethylphosphino)ethane; BAr4F = B[(3,5-(CF3)2)C6H3]4), was investigated as a precatalyst for three-component coupling of arenes, alkenes, and alkynes. Although a sterically attenuated catalyst was targeted with the goal of accelerating C–H functionalization, hydrovinylation derived from the alkene and alkyne was favored over three-component coupling. Remarkably, no catalytic hydrovinylation was observed in the absence of arene, demonstrating the role of C–H activation in the hydrovinylation process and ruling out a mechanism that involves β-H elimination from a cobalt(III) metallacycle. Deuterium labeling supported β-H elimination from a putative cobalt(III)–alkyl,aryl intermediate that forms after C–H activation by a cobalt(III) metallacycle. By varying the arene and alkene coupling partners, factors affecting the selectivity of C(sp3)–C(sp2) reductive elimination versus β-H elimination from the cobalt(III)–alkyl,aryl intermediate were determined.

Asymmetric Hydrogenation of Indazole-Containing Enamides Relevant to the Synthesis of Zavegepant Using Neutral and Cationic Cobalt Precatalysts.

The cobalt-catalyzed asymmetric hydrogenation of indazole-containing enamides relevant to the synthesis of the calcitonin gene-related peptide (CGRP) receptor antagonist, zavegepant (1), approved for the treatment of migraines, is described. Both neutral bis(phosphine)cobalt(II) and cationic bis(phosphine)cobalt(I) complexes served as efficient precatalysts for the enamide hydrogenation reactions, providing excellent yield and enantioselectivities (up to >99.9%) for a range of related substrates, though key reactivity differences were observed. Hydrogenation of indazole-containing enamide, methyl (Z)-2-acetamido-3-(7-methyl-1H-indazol-5-yl)acrylate, was performed on a 20 g scale.

Access to Bis(σ‐B−H) Complexes of Ruthenium Bearing Monoaryl Borate and Borane Ligands

AbstractA series of ruthenium bis(σ‐B−H) borate complexes 1–4 have been prepared by a salt‐elimination protocol using lithium monoaryl trihydroborates Li[ArBH3] (R=Ph, 3,5‐(CF3)2C6H3, o‐tol or Mes) and the corresponding metal halide Cp*Ru(PCy3)Cl. All of these bis(σ‐B−H) borate complexes are stable at room temperature and isolated in good yields (70–92 %). Additionally, treatment of 4 with the hydride abstracting agent B(C6F5)3 generated rare cationic bis(σ‐B−H) borane complex 5. Crystallographic characterization data are provided for 3 and 5. All these new complexes were fully characterized by multinuclear NMR spectroscopy and elemental analysis.

Ionic mononuclear [Fe] and heterodinuclear [Fe,Ru] bis(diphenylphosphino)alkane complexes: Synthesis, spectroscopy, DFT structures, cytotoxicity, and biomolecular interactions

Iron(II) and Ru(II) half-sandwich compounds encompass some promising pre-clinical anticancer agents whose efficacy may be tuned by structural modification of the coordinated ligands. Here, we combine two such bioactive metal centres in cationic bis(diphenylphosphino)alkane-bridged heterodinuclear [Fe2+, Ru2+] complexes to delineate how ligand structural variations modulate compound cytotoxicity. Specifically, Fe(II) complexes of the type [(η5–C5H5)Fe(CO)2(κ1–PPh2(CH2)nPPh2)]{PF6} (n = 1–5), compounds 1–5, and heterodinuclear [Fe2+, Ru2+] complexes, [(η5–C5H5)Fe(CO)2(μ–PPh2(CH2)nPPh2))(η6–p–cymene)RuCl2]{PF6} (n = 2–5) (compounds 7–10), were synthesized and characterised. The mononuclear complexes were moderately cytotoxic against two ovarian cancer cell lines (A2780 and cisplatin resistant A2780cis) with IC50 values ranging from 2.3 ± 0.5 μM to 9.0 ± 1.4 μM. For 7–10, the cytotoxicity increased with increasing Fe⋅⋅⋅Ru distance, consistent with their DNA affinity. UV–visible spectroscopy suggested the chloride ligands in heterodinuclear 8–10 undergo stepwise substitution by water on the timescale of the DNA interaction experiments, probably affording the species [RuCl(OH2)(η6-p-cymene)(PRPh2)]2+ and [Ru(OH)(OH2)(η6-p-cymene)(PRPh2)]2+ (where PRPh2 has R = [−(CH2)5PPh2–Fe(C5H5)(CO)2]+). One interpretation of the combined DNA-interaction and kinetic data is that the mono(aqua) complex may interact with dsDNA through nucleobase coordination. Heterodinuclear 10 reacts with glutathione (GSH) to form stable mono- and bis(thiolate) adducts, 10-SG and 10-SG2, with no evidence of metal ion reduction (k1 = 1.07 ± 0.17 × 10−1 min−1 and k2 = 6.04 ± 0.59 × 10−3 min−1 at 37 °C). This work highlights the synergistic effect of the Fe2+/Ru2+ centres on both the cytotoxicity and biomolecular interactions of the present heterodinuclear complexes.

Hydrogen-bonding and resonance stabilisation effects in cationic bis(iminium) phenoxide diacids.

The synthesis and characterisation of a bis(iminium)phenoxide diacid cation [4-tBu-C6H2-2,6-(HCN(H)Dipp)-1-O]+ ([H2tBu,DippL]+), is discussed. [H2tBu,DippL][BF4] (1) and [H2tBu,DippL][H2N{B(C6F5)3}2] (2) were synthesised in high yields via protonation of the bis(imino)phenol conjugate base with ethereal HBF4 or Bochmann's acid ([H(OEt2)2][H2N{B(C6F5)3}2]). Both species were fully characterised using NMR and IR spectroscopy as well as X-ray crystallography. The cationic fragment adopts an unusual tautomeric form in which both acidic protons are located on the nitrogen atoms: [HN〈O〉NH]+. This bis(iminium) phenoxide tautomer is stabilised by delocalisation of electron density from oxygen, into the extended π-system of the planar cation, and was found to be 22.6 and 263.1 kJ mol-1 lower in energy (ΔG) than the alternative [N〈OH〉NH]+ and [N〈OH2〉N]+ tautomers respectively. Topological analysis confirmed the presence of two electrostatic N+H⋯O- hydrogen bonds which contribute -111.2 kJ mol-1 towards the stabilisation of the diacid. The pKa values of the cations were estimated, from NMR experiments, to be 4.2 in THF (1) and 11.4 in acetonitrile (2).

Optimization of G-Quadruplex Ligands through a SAR Study Combining Parallel Synthesis and Screening of Cationic Bis(acylhydrazones).

G-quadruplexes (G4s), secondary structures adopted by guanine-rich DNA and RNA sequences, are implicated in numerous biological processes and have been suggested as potential drug targets. Accordingly, there is an increasing interest in developing high-throughput methods that allow the generation of congeneric series of G4-targeting molecules ("ligands") and investigating their interactions with the targets. We have developed an operationally simple method of parallel synthesis to generate "ready-to-screen" libraries of cationic acylhydrazones, a motif that we have previously identified as a promising scaffold for potent, biologically active G4 ligands. Combined with well-established screening techniques, such as fluorescence melting, this method enables the rapid synthesis and screening of combinatorial libraries of potential G4 ligands. Following this protocol, we synthesized a combinatorial library of 90 bis(acylhydrazones) and screened it against five different nucleic acid structures. This way, we were able to analyze the structure-activity relationships within this series of G4 ligands, and identified three novel promising ligands whose interactions with G4-DNAs of different topologies were studied in detail by a combination of several biophysical techniques, including native mass spectrometry, and molecular modeling.

C-H Activation by Isolable Cationic Bis(phosphine) Cobalt(III) Metallacycles.

Five- and six-coordinate cationic bis(phosphine) cobalt(III) metallacycle complexes were synthesized with the general structures, [(depe)Co(cycloneophyl)(L)(L′)][BArF4] (depe = 1,2-bis(diethylphosphino)ethane; cycloneophyl = [κ-C:C-(CH2C(Me)2)C6H4]; L/L′ = pyridine, pivalonitrile, or the vacant site, BAr4F = B[(3,5-(CF3)2)C6H3]4). Each of these compounds promoted facile directed C(sp2)–H activation with exclusive selectivity for ortho-alkylated products, consistent with the selectivity of reported cobalt-catalyzed arene-alkene-alkyne coupling reactions. The direct observation of C–H activation by cobalt(III) metallacycles provided experimental support for the intermediacy of these compounds in this class of catalytic C–H functionalization reaction. Deuterium labeling and kinetic studies provided insight into the nature of C–H bond cleavage and C–C bond reductive elimination from isolable cobalt(III) precursors.

Synthesis, Coordination Chemistry, and Mechanistic Studies of P,N-Type Phosphaalkene-Based Rh(I) Complexes.

The synthesis of P,N-phosphaalkene ligands, py-CH═PMes* (1, py = 2-pyridyl, Mes* = 2,4,6-tBu-C6H2) and the novel quin-CH═PMes* (2, quin = 2-quinolinyl) is described. The reaction with [Rh(μ-Cl)cod]2 produces Rh(I) bis(phosphaalkene) chlorido complexes 3 and 4 with distorted trigonal bipyramidal coordination environments. Complexes 3 and 4 show a pronounced metal-to-ligand charge transfer (MLCT) from Rh into the ligand P═C π* orbitals. Upon heating, quinoline-based complex 4 undergoes twofold C-H bond activation at the o-tBu groups of the Mes* substituents to yield the cationic bis(phosphaindane) Rh(I) complex 5, which could not be observed for the pyridine-based analogue 3. Using sub- or superstoichiometric amounts of AgOTf the C-H bond activation at an o-tBu group of one or at both Mes* was detected, respectively. Density functional theory (DFT) studies suggest an oxidative proton shift pathway as an alternative to a previously reported high-barrier oxidative addition at Rh(I). The Rh(I) mono- and bis(phosphaindane) triflate complexes 6 and 7, respectively, undergo deprotonation at the benzylic CH2 group of the phosphaindane unit in the presence of KOtBu to furnish neutral, distorted square-planar Rh(I) complexes 8 and 9, respectively, with one of the P,N ligands being dearomatized. All complexes were fully characterized, including multinuclear NMR, vibrational, and ultraviolet-visible (UV-vis) spectroscopy, as well as single-crystal X-ray and elemental analysis.

Cationic Bis(phosphine) Cobalt(I) Arene Complexes as Precatalysts for the Asymmetric Synthesis of Sitagliptin

Cationic Bis(phosphine) Cobalt(I) Arene Complexes as Precatalysts for the Asymmetric Synthesis of Sitagliptin

Three-Component Coupling of Arenes, Ethylene, and Alkynes Catalyzed by a Cationic Bis(phosphine) Cobalt Complex: Intercepting Metallacyclopentenes for C-H Functionalization.

A cobalt-catalyzed intermolecular three-component coupling of arenes, ethylene, and alkynes was developed using the well-defined air-stable cationic bis(phosphine) cobalt(I) complex, [(dcype)Co(η6-C7H8)][BArF4] (dcype = 1,2-bis(dicyclohexylphosphino)ethane; BArF4 = B[(3,5-(CF3)2)C6H3]4), as the precatalyst. All three components were required for turnover and formation of ortho-homoallylated arene products. A range of directing groups including amide, ketone, and 2-pyridyl substituents on the arene promoted the reaction. The cobalt-catalyzed method exhibited broad functional group tolerance allowing for the late-stage functionalization of two drug molecules, fenofibrate and haloperidol. A series of control reactions, deuterium labeling studies, resting state analysis, as well as synthesis of substrate- and product-bound η6-arene complexes supported a pathway involving C(sp2)–H activation from a cobalt(III) metallacycle.

Strongly Electron-Donating Triazolylidene Ligands: Cationic Metal Carbonyl Complexes of 1-Methyl-1,2,3-triazole as Triazolium Surrogates.

A new strategy for tuning the electronic properties of 1,2,3-triazol-5-ylidene metal complexes is reported using {Mo(η3-C4H7)(bipy)(CO)2} or {Re(bipy)(CO)3} fragments as substituents at the triazole N3 atom. The reaction of cationic molybdenum(II) and rhenium(I) 1-methyl-1,2,3-triazole compounds with the strong base KN(SiMe3)2 in the presence of electrophilic metal fragments, such as AgOTf (OTf = trifluoromethanesufonate) or [CuCl(IPr)] [IPr = 2,6-(diisopropyl)phenylimidazol-2-ylidene] affords a new type of 1,2,3-triazol-5-ylidene complexes. For silver(I) cationic bis(triazolylidene), [Ag(tzNHCM)2]OTf (M = [Mo], 2; [Re], 4), complexes are obtained, whereas in the case of Cu(I) mixed normal/mesoionic NHC, [Cu(IPr)(tzNHCM)]OTf (M = [Mo], 7; [Re], 8) complexes are formed. This special type of mesoionic N-heterocyclic carbenes bear a metal fragment at the N3 atom of the 1,2,3-triazole moiety, showing notable enhancement of the carbene electron donor ability compared to conventional alkyl-substituted analogues. Transmetalation from cationic silver bis(triazolylidene) complexes 2 and 4, prepared using this methodology, has proven to be very efficient toward [M'Cl(cod)]2 (M' = Rh, Ir; cod = 1,5-cyclooctadiene), affording the corresponding cationic bis(triazolylidene) [M'(cod)(tzNHCM)2]OTf (9-12) complexes. A subsequent reaction with CO(g) easily produces substitution of the diene ligand, affording the corresponding cis-dicarbonyl [M'(CO)2(tzNHCM)2]OTf (13-16) compounds.

Kinetics and Mechanism of the Gold-Catalyzed Hydroamination of 1,1-Dimethylallene with N-Methylaniline.

The mechanism of the intermolecular hydroamination of 3-methylbuta-1,2-diene (1) with N-methylaniline (2) catalyzed by (IPr)AuOTf has been studied by employing a combination of kinetic analysis, deuterium labelling studies, and in situ spectral analysis of catalytically active mixtures. The results of these and additional experiments are consistent with a mechanism for hydroamination involving reversible, endergonic displacement of N-methylaniline from [(IPr)Au(NHMePh)]+ (4) by allene to form the cationic gold π-C1,C2-allene complex [(IPr)Au(η2 -H2 C=C=CMe2 )]+ (I), which is in rapid, endergonic equilibrium with the regioisomeric π-C2,C3-allene complex [(IPr)Au(η2 -Me2 C=C=CH2 )]+ (I'). Rapid and reversible outer-sphere addition of 2 to the terminal allene carbon atom of I' to form gold vinyl complex (IPr)Au[C(=CH2 )CMe2 NMePh] (II) is superimposed on the slower addition of 2 to the terminal allene carbon atom of I to form gold vinyl complex (IPr)Au[C(=CMe2 )CH2 NMePh] (III). Selective protodeauration of III releases N-methyl-N-(3-methylbut-2-en-1-yl)aniline (3 a) with regeneration of 4. At high conversion, gold vinyl complex II is competitively trapped by an (IPr)Au+ fragment to form the cationic bis(gold) vinyl complex {[(IPr)Au]2 [C(=CH2 )CMe2 NMePh]}+ (6).

Selective demethylation of O-aryl glycosides by iridium-catalyzed hydrosilylation.

The cleavage of alkyl ethers by hydrosilylation is a powerful synthetic tool for the generation of silyl ethers. Previous attempts to apply this transformation to carbohydrate derivatives have been constrained by poor selectivity and preferential reduction of the anomeric position. O-Aryl glycosides are found to be stable under iridium- and borane-catalyzed hydrosilylation conditions, allowing for alkyl ether cleavage without loss of anomeric functionality. A cationic bis(phosphine)iridium complex catalyzes the selective 3-demethylation of a variety of 2,3,4-tri-O-methyl pyranoses, offering a unique approach to 3-hydroxy or 3-acetyl 2,4-di-O-methylpyranoses.

Comparison of the Reactivity and Structures for the Neutral and Cationic Bis(imino)pyridyl Iron and Cobalt Species by DFT Calculations

Density Functional Theory (DFT) method was adopted to investigate and compare the reaction mechanisms of ethylene polymerization catalyzed by neutral, cationic bis(imino)pyridyl (PDI) iron and cobalt derivatives. The electronic structure and the oxidation states of the metal center and the PDI ligand were analyzed by taking spin states, natural bond orbital (NBO) charge distribution, etc. into consideration, revealing that the reactivity is closely related to the valence electron numbers instead of the charge numbers. The neutral Co(0) had the lowest reactivity as it possessed the most electrons. During the formation of the cationic Co(+)/Fe(+), one electron was mainly lost from PDI ligand rather than the metal center while the metal center maintained +II valence state through the process. Moreover, a special unsymmetrically bidentate N^N coordination manner was found to provide the deficient metal surroundings with 14e, which may initiate the reactivity of some unsymmetrical species with rich electrons. Finally, an anion [AlMe4]− participating process was proposed to explain the presence of the experimentally observed LCo(+)B(C2H4). A special intermediate, Co(+)B(C2H4) [AlMe4]− with Co in +I and absence of Co–C σ bond, was obtained. These calculation results may provide fundamental information for further understanding and designing the ethylene polymerization catalysts.