Acid-catalyzed Research Articles

Solvent and Temperature Dependencies of the Rates of Thermal Cis-to-Trans Isomerization of Tetra-(ortho)substituted 4-Aminoazobenzenes Containing 2,6-Dimethoxy Groups.

The kinetics of thermal cis-to-trans isomerization of two tetra-(ortho)substituted 4-aminoazobenzene derivatives containing 2,6-dimethoxy groups in the 4-aminobenzene ring and either 2',6'-dimethyl (1) or 2',6'-dichloro groups in another ring was studied in 16 and 9 solvents, respectively, at room temperature. In addition, the kinetics of isomerization of 1 was studied at variable temperatures in 6 solvents. The solvent effects were analyzed in terms of multiparameter correlations using the Kamlet-Taft, Catalan, and Laurence scales. The temperature dependencies were analyzed in terms of the isokinetic relationship by using Exner's method. The correlation analysis was also extended to several previously reported systems, including isomerization of unsubstituted 4-aminoazobenzene and push-pull 4-NR2-4'-NO2 azobenzenes. It was established that for all 4-aminoazobenzenes in contrast to push-pull azobenzenes, the increase in solvent dipolarity does not affect or even inhibit isomerization rates; however, the increase in solvent acidity induces large rate accelerations. The isokinetic relationship holds only in aprotic solvents, while in alcohols and water, the temperature dependencies do not pass through the common point at T = Tiso, indicating different mechanisms operating in protic and aprotic solvents. The acceleration effect by protic solvents does not represent a type of general acid catalysis as follows from the small solvent isotope effect kH/kD = 1.26 in water. It is suggested that protic solvents induce a change in the reaction mechanism supposedly from inversion to rotation by hydrogen bonding stabilization of the negative charge developed on the azo group in a resonance structure involving a 4-amino group.

Stereoselective Synthesis of Axially Chiral Allenes and Styrenes via Chiral Phosphoric Acid Catalysis: An Overview.

Chiral allenes and styrenes are essential components in fields like medicinal chemistry, materials science, and organic synthesis. They serve a crucial role as chiral ligands and catalysts in asymmetric synthesis. Over the past decade, there has been a significant advancement in the development of practical methods utilizing organocatalytic strategies for the synthesis of chiral allenes and styrenes. It is noteworthy that despite extensive studies on the formation of allenes and styrenes, existing reviews on their construction confined to a specific organocatalysis, called chiral phosphoric acid catalysis, are less documented. This review aims to explore different conceptual approaches based on the electrophilic species involved in the reaction to produce stereoselective chiral allenes and styrenes, providing insights into recent advancements in the field. Emphasis is placed on works published since 2017, with detailed discussions on reaction mechanisms and examples from recent literature.

MEDT analysis of mechanism and selectivities in non-catalyzed and lewis acid-catalyzed diels–alder reactions between R-carvone and isoprene

Within the context of Molecular Electronic Density Theory (MEDT), this study investigates the Diels–Alder reaction among isoprene (2) and R-carvone (1R) applying DFT simulations, with and without Lewis acid (LA) catalysis. The results show that carvone (1R) acts as an electrophile and isoprene (2) as a nucleophile in a polar process. LA catalysis increases the electrophilicity of carvone, thereby improving the reactivity and selectivity of the reaction by reducing the activation Gibbs free energy. Parr functions reveal that the C5=C6 double bond is more reactive than the C9=C10 double bond, indicating chemoselectivity. The examination of the Electron Localization Function (ELF) reveals high regio- and stereoselectivity, indicating an asynchronous mechanism for the LA-catalyzed DA reaction. Furthermore, it is suggested that cycloadduct 3 has great anti-HIV potential because it exhibits lower binding energies than azidothymidine (AZT) in the docking studies of cycloadducts 3 and 4 amongst a primary HIV-1protein (1A8O plus 5W4Q).

Topological defects induced by N incorporation-evaporation strategy promote the metal-support interaction over Pd/NC for catalytic formic acid dehydrogenation

Hydrogen (H2) production from formic acid (FA) decomposition is considered to be the application pattern of clean energy with board prospects. However, in precious metal-based catalysts, the weak metal-support interaction always leads to the reduction of exposure and utilization of active centers. Herein, N incorporation-evaporation strategy was employed to generate more topological carbon defects to deposit Pd nanoparticles (Pd NPs). The results demonstrate that topological defects are able to promote the electron transfer at the Pd-carbon interface, resulting in enhanced metal-support interaction. The Pd/NC800 catalyst with numerous topological defects exhibits significant activity (turnover frequency of 1251 h−1) and stability under mild conditions because of highly dispersed Pd centers with a modulated electronic state. The mechanism of enhancing metal-support interaction through topological defects was discussed through theoretical calculations, and it was found that the optimal topological configuration is the 5–8-5 defect induced by pyrrolic N. This work casts a new light on understanding the interaction between carbon configurations and active metals.

Facile access to bicyclo[2.1.1]hexanes by Lewis acid-catalyzed formal cycloaddition between silyl enol ethers and bicyclo[1.1.0]butanes

Saturated three-dimensional carbocycles have gained increasing prominence in synthetic and medicinal chemistry. In particular, bicyclo[2.1.1]hexanes (BCHs) have been identified as the molecular replacement for benzenes. Here, we present facile access to a variety of BCHs via a stepwise two-electron formal (3 + 2) cycloaddition between silyl enol ethers and bicyclo[1.1.0]butanes (BCBs) under Lewis acid catalysis. The reaction features wide functional group tolerance for silyl enol ethers, allowing the efficient construction of two vicinal quaternary carbon centers and a silyl-protected tertiary alcohol unit in a streamlined fashion. Interestingly, the reaction with conjugated silyl dienol ethers can provide access to bicyclo[4.1.1]octanes (BCOs) equipped with silyl enol ethers that facilitate further transformation. The utilities of this methodology are demonstrated by the late-stage modification of natural products, transformations of tertiary alcohol units on bicyclo[2.1.1]hexane frameworks, and derivatization of silyl enol ethers on bicyclo[4.1.1]octanes, delivering functionalized bicycles that are traditionally inaccessible.

Liquefaction pathway of corn stalk cellulose in the presence of polyhydric alcohols under acid catalysis

In this paper, the experiment of cellulose from corn stalk using 1, 2-propylene glycol (PG) and diethylene glycol (DEG) liquefaction catalyzed by phosphoric acid at atmosphere pressure was carried out. The effect of reaction time on the structural changes of cellulose in the liquefaction process of polyhydric alcohols was investigated, aiming at understanding the mechanism of cellulose liquefaction reaction under the action of acid catalyzed polyhydric alcohols. It was found that the liquefaction yield increased first and then decreased with the extension of reaction time, and reached the highest at 150 min (99.34 %). In the phase of increasing liquefaction yield, cellulose was degraded and translated into glucose, which was then converted into plenty of glycosides with PG/DEG. These glycosides were further converted into low molecular weight (LMW) substances such as hydrocarbons, acids, alcohols, esters, ketones, and ethers. At this time, the biofuel contained 70 %–85 % compounds with carbon number less than 25 and 5 %–10 % compounds with carbon number more than 25. As the prolongation of reaction time (after 150 min), quantities of unstable free radicals formed by cellulose degradation could combine with each other or with hydrogen atoms provided by PG/DEG to produce relatively stable macromolecular substances. That is, the polydispersity (Mw/Mn, abbreviated Ð = 1.28) of the generated biofuel at this stage no longer decreased. However, liquefaction residue produced at 240 min had changed essentially, which was completely different from the liquefaction residue produced in the early stage of liquefaction. In conclusion, this paper revealed the partial reaction process of cellulose by studying the structural changes in the liquefaction process of polyhydric alcohols, which laid a theoretical foundation for exploring the liquefaction mechanism of cellulose.

Enantioselective N-H Bond Insertion Reaction of Anilines Enabled by Ruthenium and Chiral Phosphoric Acid Cooperative Catalysis.

The enantioselective carbene insertion into N-H bonds of anilines has been realized by cooperative catalysis of ruthenium complexes and chiral phosphoric acids, providing the expected α-aryl glycines in moderate to good yields with high enantioselectivity. Typically, by slightly modifying the reaction conditions, this approach allows the N-H bond insertion reaction to be effective for both α-aryl and α-alkyl diazoacetates for the first time with high enantioselectivity (up to 96% and 95% ee, respectively).

Simultaneous High-Performance Recovery and Extended Acid-Catalyzed Hydrolysis of Oleuropein and Flavonoid Glycosides of Olive (Olea europaea) Leaves: Hydrothermal versus Ethanol Organosolv Treatment.

Olive leaves (OLLs) are an exceptional bioresource of natural polyphenols with proven antioxidant activity, yet the applicability of OLL extracts is constrained by the relatively high polarity of the major polyphenols, which occur as glycosides. To overcome this limitation, OLLs were subjected to both hydrothermal and ethanol organosolv treatments, fostered by acid catalysis to solicit in parallel increased polyphenol recovery and polyphenol modification into simpler, lower-polarity substances. After an initial screening of natural organic acids, oxalic acid (OxAc) was found to be the highest-performing catalyst. The extraction behavior using OxAc-catalyzed hydrothermal and ethanol organosolv treatments was appraised using kinetics, while treatment optimization was accomplished by deploying response-surface methodology. The comparative assessment of the composition extracts produced under optimal conditions of residence time and temperature was performed with liquid chromatography-tandem mass spectrometry and revealed that OLLs treated with 50% ethanol/1.5% HCl suffered extensive oleuropein and flavone glycoside hydrolysis, affording almost 23.4 mg hydroxytyrosol and 2 mg luteolin per g dry weight. On the other hand, hydrothermal treatment with 5% OxAc provided 20.2 and 0.12 mg of hydroxytyrosol and luteolin, respectively. Apigenin was in all cases a minor extract constituent. The study presented herein demonstrated for the first time the usefulness of using a natural, food-grade organic acid to perform such a task, yet further investigation is needed to maximize the desired effect.

Aqueous Developable and CO2‐Sourced Chemical Amplification Photoresist with High Performance

AbstractSeeking high‐performance photoresists is an important item for semiconductor industry due to the continuous miniaturization and intelligentization of integrated circuits. Polymer resin containing carbonate group has many desirable properties, such as high transmittance, acid sensitivity and chemical formulation, thus serving as promising photoresist material. In this work, a series of aqueous developable CO2‐sourced polycarbonates (CO2‐PCs) were produced via alternating copolymerization of CO2 and epoxides bearing acid‐cleavable cyclic acetal groups in the presence of tetranuclear organoborane catalyst. The produced CO2‐PCs were investigated as chemical amplification resists in deep ultraviolet (DUV) lithography. Under the catalysis of photogenerated acid, the acetal (ketal) groups in CO2‐PC were hydrolysed into two equivalents of hydroxyl groups, which change the exposed area from hydrophobicity to hydrophilicity, thus enabling the exposed area to be developed with water. Through normalized remaining thickness analysis, the optimal CO2‐derived resist achieved a remarkable sensitivity of 1.9 mJ/cm2, a contrast of 7.9, a favorable resolution (750 nm, half pitch), and a good etch resistance (38 % higher than poly(tert‐butyl acrylate)). Such performances outperform commercial KrF and ArF chemical amplification resists (i.e., polyhydroxystyrene‐derived and polymethacrylate‐based resists), which endows broad application prospects in the field of DUV (KrF and ArF) and extreme ultraviolet (EUV) lithography for nanomanufacturing.

Mechanistic insights into the conversion of flavin adenine dinucleotide (FAD) to 8-formyl FAD in formate oxidase: a combined experimental and in-silico study

Formate oxidase (FOx), which contains 8-formyl flavin adenine dinucleotide (FAD), exhibits a distinct advantage in utilizing ambient oxygen molecules for the oxidation of formic acid compared to other glucose-methanol-choline (GMC) oxidoreductase enzymes that contain only the standard FAD cofactor. The FOx-mediated conversion of FAD to 8-formyl FAD results in an approximate 10-fold increase in formate oxidase activity. However, the mechanistic details underlying the autocatalytic formation of 8-formyl FAD are still not well understood, which impedes further utilization of FOx. In this study, we employ molecular dynamics simulation, QM/MM umbrella sampling simulation, enzyme activity assay, site-directed mutagenesis, and spectroscopic analysis to elucidate the oxidation mechanism of FAD to 8-formyl FAD. Our results reveal that a catalytic water molecule, rather than any catalytic amino acids, serves as a general base to deprotonate the C8 methyl group on FAD, thus facilitating the formation of a quinone-methide tautomer intermediate. An oxygen molecule subsequently oxidizes this intermediate, resulting in a C8 methyl hydroperoxide anion that is protonated and dissociated to form OHC-RP and OH−. During the oxidation of FAD to 8-formyl FAD, the energy barrier for the rate-limiting step is calculated to be 22.8 kcal/mol, which corresponds to the required 14-hour transformation time observed experimentally. Further, the elucidated oxidation mechanism reveals that the autocatalytic formation of 8-formyl FAD depends on the proximal arginine and serine residues, R87 and S94, respectively. Enzymatic activity assay validates that the mutation of R87 to lysine reduces the kcat value to 75% of the wild-type, while the mutation to histidine results in a complete loss of activity. Similarly, the mutant S94I also leads to the deactivation of enzyme. This dependency arises because the nucleophilic OH− group and the quinone-methide tautomer intermediate are stabilized through the noncovalent interaction provided by R87 and S94. These findings not only explain the mechanistic details of each reaction step but also clarify the functional role of R87 and S94 during the oxidative maturation of 8-formyl FAD, thereby providing crucial theoretical support for the development of novel flavoenzymes with enhanced redox properties.

Iron-sulphur protein catalysed [4+2] cycloadditions in natural product biosynthesis

To the best of our knowledge, enzymes that catalyse intramolecular Diels-Alder ([4+2] cycloaddition) reactions are frequently reported in natural product biosynthesis; however, no native enzymes utilising Lewis acid catalysis have been reported. Verticilactam is a representative member of polycyclic macrolactams, presumably produced by spontaneous cycloaddition. We report that the intramolecular [4+2] cycloadditions can be significantly accelerated by ferredoxins (Fds), a class of small iron-sulphur (Fe-S) proteins. Through iron atom substitution by Lewis acidic gallium (Ga) iron and computational calculations, we confirm that the ubiquitous Fe-S cluster efficiently functions as Lewis acid to accelerate the tandem [4+2] cycloaddition and Michael addition reactions by lowering free energy barriers. Our work highlights Nature’s ingenious strategy to generate complex molecule structures using the ubiquitous Fe-S protein. Furthermore, our study sheds light on the future design of Fd as a versatile Lewis acid catalyst for [4+2] cycloaddition reactions.

Overcoming Challenges in O-Nitration: Selective Alcohol Nitration Deploying N,6-Dinitrosaccharin and Lewis Acid Catalysis.

Nitrate esters hold pivotal roles in pharmaceuticals, energetic materials, and atmospheric processes, motivating the development of efficient synthesis routes. Here, we present a novel catalytic method for the synthesis of nitrates via the direct O-nitration of alcohols, addressing limitations of current traditional methods. Leveraging bench-stable and recoverable N,6-dinitrosaccharin reagent, our catalytic strategy employs magnesium triflate to achieve mild and selective O-nitration of alcohols, offering broad substrate scope and unprecedentedly large functional group tolerance (e.g. alkenes, alkynes, carbonyls). DFT mechanistic studies reveal a dual role of the magnesium catalyst in the activation of both the nitrating reagent and the alcohol substrate. They also unveil a barrierless proton transfer upon formation of a widely-accepted - yet elusive in solution - nitrooxonium ion intermediate. Overall, our work contributes to the development of mild, selective, and sustainable approaches to nitrates synthesis, with potential applications in drug discovery, materials science, and environmental chemistry.

Overcoming Challenges in O‐Nitration: Selective Alcohol Nitration Deploying N,6‐Dinitrosaccharin and Lewis Acid Catalysis

Nitrate esters hold pivotal roles in pharmaceuticals, energetic materials, and atmospheric processes, motivating the development of efficient synthesis routes. Here, we present a novel catalytic method for the synthesis of nitrates via the direct O‐nitration of alcohols, addressing limitations of current traditional methods. Leveraging bench‐stable and recoverable N,6‐dinitrosaccharin reagent, our catalytic strategy employs magnesium triflate to achieve mild and selective O‐nitration of alcohols, offering broad substrate scope and unprecedented large functional group tolerance (e.g. alkenes, alkynes, carbonyls). DFT mechanistic studies reveal a dual role of the magnesium catalyst in the activation of both the nitrating reagent and the alcohol substrate. They also unveil a barrierless proton transfer upon formation of a widely‐accepted — yet elusive in solution — nitrooxonium ion intermediate. Overall, our work contributes to the development of mild, selective, and sustainable approaches to nitrates synthesis, with potential applications in drug discovery, materials science, and environmental chemistry.

How Droplets Can Accelerate Reactions─Coacervate Protocells as Catalytic Microcompartments.

ConspectusCoacervates are droplets formed by liquid-liquid phase separation (LLPS) and are often used as model protocells-primitive cell-like compartments that could have aided the emergence of life. Their continued presence as membraneless organelles in modern cells gives further credit to their relevance. The local physicochemical environment inside coacervates is distinctly different from the surrounding dilute solution and offers an interesting microenvironment for prebiotic reactions. Coacervates can selectively take up reactants and enhance their effective concentration, stabilize products, destabilize reactants and lower transition states, and can therefore play a similar role as micellar catalysts in providing rate enhancement and selectivity in reaction outcome. Rate enhancement and selectivity must have been essential for the origins of life by enabling chemical reactions to occur at appreciable rates and overcoming competition from hydrolysis.In this Accounts, we dissect the mechanisms by which coacervate protocells can accelerate reactions and provide selectivity. These mechanisms can similarly be exploited by membraneless organelles to control cellular processes. First, coacervates can affect the local concentration of reactants and accelerate reactions by copartitioning of reactants or exclusion of a product or inhibitor. Second, the local environment inside the coacervate can change the energy landscape for reactions taking place inside the droplets. The coacervate is more apolar than the surrounding solution and often rich in charged moieties, which can affect the stability of reactants, transition states and products. The crowded nature of the droplets can favor complexation of large molecules such as ribozymes. Their locally different proton and water activity can facilitate reactions involving a (de)protonation step, condensation reactions and reactions that are sensitive to hydrolysis. Not only the coacervate core, but also the surface can accelerate reactions and provides an interesting site for chemical reactions with gradients in pH, water activity and charge. The coacervate is often rich in catalytic amino acids and can localize catalysts like divalent metal ions, leading to further rate enhancement inside the droplets. Lastly, these coacervate properties can favor certain reaction pathways, and thereby give selectivity over the reaction outcome.These mechanisms are further illustrated with a case study on ribozyme reactions inside coacervates, for which there is a fine balance between concentration and reactivity that can be tuned by the coacervate composition. Furthermore, coacervates can both catalyze ribozyme reactions and provide product selectivity, demonstrating that coacervates could have functioned as enzyme-like catalytic microcompartments at the origins of life.

Molecular Diversity from Longipinenes of Santolina viscosa Lag. through Acid Catalysis: Biocidal Activity.

The search for new compounds with biocidal potential was carried out, focusing on the longipinenes 1-7 from the plant species Santolina viscosa Lag. Compounds 1, 2, and 5 showed remarkable molecular diversity when treated in acidic reaction conditions. Protonic, Lewis, and heterogeneous compounds were used in the treatment. Three main models of reaction have been observed: isomerization of the double bond (8-10); rearrangements to longibornane-based skeleton (11-15) and ring-opening to himachalane-based skeleton (16-18). Secolongibornane aldehydes 23 and 24 were obtained after epoxide opening under the same reaction conditions. The elucidation of the structures of the new compounds was carried out using spectroscopic data and was supported by computational theoretical calculations of 13C NMR spectra. Additionally, high-resolution mass spectrometry and single-crystal X-ray diffraction analysis were employed for certain compounds. Natural longipinenes 4-7, methyl esters 1-3 of corresponding natural carboxylic acids and the isomerized and derivatives compounds 8-19 exhibit moderate to high insecticidal activity against R. padi and M. persicae insects. Longipinene 5 shows potent inhibition against the root growth of the plants L. perenne and L. sativa, as well as compound 2 on the leaves of L. perenne. Furthermore, significant ixocidal and nematicidal activity was found for this latter compound.

Alkoxyalkylation of Electron-Rich Aromatic Compounds.

Alkoxyalkylation and hydroxyalkylation methods utilizing oxo-compound derivatives such as aldehydes, acetals or acetylenes and various alcohols or water are widely used tools in preparative organic chemistry to synthesize bioactive compounds, biosensors, supramolecular compounds and petrochemicals. The syntheses of such molecules of broad relevance are facilitated by acid, base or heterogenous catalysis. However, degradation of the N-analogous Mannich bases are reported to yield alkoxyalkyl derivatives via the retro-Mannich reaction. The mutual derivative of all mentioned species are quinone methides, which are reported to form under both alkoxy- and aminoalkylative conditions and via the degradation of the Mannich-products. The aim of this review is to summarize the alkoxyalkylation (most commonly alkoxymethylation) of electron-rich arenes sorted by the methods of alkoxyalkylation (direct or via retro-Mannich reaction) and the substrate arenes, such as phenolic and derived carbocycles, heterocycles and the widely examined indole derivatives.

Lewis Acid-Catalyzed Formal [2π+2σ] Cycloaddition of Bicyclobutanes with Quinoxalin-2(1H)-ones: Access to Quinoxaline-Fused Aza-Bicyclo[2.1.1]hexanes.

An efficient synthesis of quinoxaline-fused aza-bicyclo[2.1.1]hexanes bearing multiple quaternary carbon centers via the intermolecular [2π+2σ] cycloaddition of bicyclo[1.1.0]butanes and quinoxalin-2(1H)-ones, facilitated by Lewis acid catalysis, is presented. This reaction is carried out under mild conditions and exhibits a broad substrate scope and excellent functional group tolerance.

Brønsted Acid-Catalyzed Cascade Ring-Opening/Cyclization of 3-Ethoxy Cyclobutanones to Access 2,8-Dioxabicyclo[3.3.1]nonane Derivatives.

A cascade ring opening of 3-ethoxy cyclobutanones followed by a double cyclization strategy has been developed via Brønsted acid catalysis. A range of 2,8-dioxabicyclo[3.3.1]nonanes are obtained from various substituted naphthols in a one-pot and open flux manner. Additionally, a 15-membered macrocycle has been synthesized by ring closing metathesis as a synthetic application.

Formal Decarbonylation of 1,2-Diketones Enabled by Synergistic Catalysis of Lewis Acid–Base Pairs and Redox Properties in CeO2

Formal Decarbonylation of 1,2-Diketones Enabled by Synergistic Catalysis of Lewis Acid–Base Pairs and Redox Properties in CeO₂

Boosting biodiesel production from waste vegetable oil water using Acid-Base Sequential Catalysis

<p>The use of active and recyclable catalysts is advantageous for catalytic biodiesel synthesis from waste vegetable oils which is in demand owing to frequent calls on environmental pollution and for clean renewable energy production. For this study, homogenous catalysts are effective at converting single-origin feedstocks low in free fatty acids (FFA) and water into biodiesel. Biodiesel production based on waste vegetable oil was carried out to establish an optimal catalyst régime. Acid-catalyzed transesterification and sequential base catalysis were used to convert waste vegetable oil to biodiesel at varying amounts of catalyst (0.46-0.58%) and different contact times (1-2 hr). Optimal yields were obtained at 2 hrs contact time and 0.50% amount of catalyst. Characterization tests conducted were specific gravity (0.8718-0.8935), flash point (117-1370C), viscosity (4.29-6.09mm2/s) and cetane index (40-43) values were within biodiesel specifications. The study, therefore, confirmed that acid-base sequential catalysis holds a lot of promise for the creation of affordable, environmentally friendly technologies. The biodiesel's characteristics were also in good agreement with American (ASTM D6571) fuel specifications. Therefore, the work recommends the utilization of acid (H2SO4) and base (NaOH) catalysis in the technologically enhanced conversion of waste vegetable oil into biodiesel.</p>