Catalysts For Hydrosilylation Research Articles

Heterogeneous hydrosilylation reaction catalysed by platinum complexes immobilized on bipyridine-periodic mesoporous organosilicas.

The utility of a bipyridine periodic mesoporous organosilica, BPy-PMO, as a support material of a hydrosilylation catalyst was investigated in the hydrosilylation of phenylacetylene with trimethoxysilane. [PtMe2(BPy-PMO)] (1) exhibited a moderate catalytic activity, whereas the reaction was successfully catalysed by [PtMe2(BPy-PMO-TMS)] (2) bearing end-capped TMS groups on the surface. Spectroscopic analyses of 2 revealed that the porous structure of BPy-PMO-TMS remained almost unchanged through the reaction. The hot filtration test supported the nonleaching property of 2, thereby exhibiting good reusability without the loss of the product yields.

Soluble Pt Nanoparticles Stabilized by a Tris‐imidazolium Tetrafluoroborate as Efficient and Recyclable Catalyst for the Stereoselective Hydrosilylation of Alkynes

AbstractSoluble platinum nanoparticles (Pt NPs) have been prepared by a two‐step procedure involving the reduction of chloroplatinic acid with ethylene glycol/NaOH at 160 °C and subsequent treatment with a THF solution of a tris‐imidazolium tetrafluoroborate at room temperature. The isolated Pt NPs have been characterized by transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM), electron diffraction (ED), Energy‐Dispersive X‐ray Spectroscopy (EDS), and elemental analysis. They proved to be efficient and recoverable catalysts for the stereoselective hydrosilylation of internal alkynes in the presence and absence of solvent.

Distinct Catalytic Performance of Cobalt(I)–N-Heterocyclic Carbene Complexes in Promoting the Reaction of Alkene with Diphenylsilane: Selective 2,1-Hydrosilylation, 1,2-Hydrosilylation, and Hydrogenation of Alkene

Selectivity control on the reaction of alkene with hydrosilane is a challenging task in the development of non-precious-metal-based hydrosilylation catalysts. While the traditional way of selectivity control relies on the use of different ligand type and/or different metals, we report herein that cobalt(I) complexes bearing different N-heterocyclic carbene ligands (NHCs) exhibit distinct selectivity in catalyzing the reaction of alkene with Ph2SiH2. [(IAd)(PPh3)CoCl] (IAd = 1,3-diadamantylimidazol-2-ylidene) is an efficient catalyst for anti-Markovnikov hydrosilylation of monosubstituted alkenes. [(IMes)2CoCl] (IMes = 1,3-dimesitylimidazol-2-ylidene) shows Markovnikov-addition selectivity in promoting the hydrosilylation of aryl-substituted alkenes. [(IMe2Me2)4Co][BPh4] (IMe2Me2 = 1,3-dimethyl-4,5-dimethylimidazol-2-ylidene) can catalyze hydrogenation of alkenes with Ph2SiH2 as the terminal hydrogen source. Mechanistic studies in combination with the knowledge on the steric nature of cobalt–NHC species su...

Efficient CO2 Insertion and Reduction Catalyzed by a Terminal Zinc Hydride Complex

AbstractThe terminal zinc hydride complex [Tntm]ZnH (2; Tntm=tris(6‐tert‐butyl‐3‐thiopyridazinyl)methanide) is an efficient hydrosilylation catalyst of CO2 at room temperature without the need of Lewis acidic additives. The inherent electrophilicity of the system leads to selective formation of the monosilylated product (MeO)3SiO2CH (at room temperature with a TOF of 22.2 h−1 and at 45 °C with a TOF of 66.7 h−1). In absence of silanes, the intermediate formate complex [Tntm]Zn(O2CH) (3) is quantitatively formed within 5 min. All complexes were fully characterized by 1H and 13C NMR spectroscopy and single‐crystal X‐ray diffraction analyses. Density functional theory (DFT) calculations reveal a high positive charge on zinc and the increased preference of the ligand to adopt a κ3‐coordination mode.

Efficient CO2 Insertion and Reduction Catalyzed by a Terminal Zinc Hydride Complex.

The terminal zinc hydride complex [Tntm]ZnH (2; Tntm=tris(6-tert-butyl-3-thiopyridazinyl)methanide) is an efficient hydrosilylation catalyst of CO2 at room temperature without the need of Lewis acidic additives. The inherent electrophilicity of the system leads to selective formation of the monosilylated product (MeO)3 SiO2 CH (at room temperature with a TOF of 22.2 h-1 and at 45 °C with a TOF of 66.7 h-1 ). In absence of silanes, the intermediate formate complex [Tntm]Zn(O2 CH) (3) is quantitatively formed within 5 min. All complexes were fully characterized by 1 H and 13 C NMR spectroscopy and single-crystal X-ray diffraction analyses. Density functional theory (DFT) calculations reveal a high positive charge on zinc and the increased preference of the ligand to adopt a κ3 -coordination mode.

Heterogeneously supported pseudo-single atom Pt as sustainable hydrosilylation catalyst

The identification of highly active heterogeneous catalysts to replace their homogeneous counterparts remains a challenge in the case of organic catalysts, especially polymers, in highly viscous reaction systems. In this work, we designed and synthesized a novel, solid-supported, and heterogeneous pseudo-single atom Pt catalyst with high activity and recyclability. Superparamagnetic Fe3O4-SiO2 core–shell nanoparticles (NPs) were used as the substrate. The functionalization of the SiO2 shell with silane coupling agents containing vinyl groups allows stabilizing Pt on the SiO2 surface through complexation. The as-prepared pseudo-single atom Pt displays high activity in the hydrosilylation of allyl-terminated polyether with polymethylhydrosiloxane and could be easily collected by applying a magnetic field. The Pt/vinyl/SiO2/Fe3O4 catalyst can be reused for up to four reaction cycles without appreciable decrease in activity. This work demonstrates a novel strategy for the design of pseudo-single atom noble metal catalysts for processes in high-viscosity media.

Earth-Abundant Transition Metal Catalysts for Alkene Hydrosilylation and Hydroboration: Opportunities and Assessments.

The addition of a silicon-hydrogen or a boron-hydrogen bond across a carbon-carbon multiple bonds is a well-established method for the introduction of versatile silane and borane functional groups to base hydrocarbon feedstocks. Transition metal catalysis, historically with precious second- and third- row transition metals, has been used to broaden the scope of the hydrofunctionalization reaction, improve reaction rate and enhance selectivity. The anti-Markovnikov selectivity of platinum-catalyzed hydrosilylation of alkenes, for example, is an enabling synthetic technology in the multibillion-dollar silicones industry. Increased emphasis on sustainable catalytic methods and more economic processes has shifted focus to catalysis with more earth-abundant transition metals such as iron, cobalt and nickel. This review describes contemporary approaches and offers a contextual analysis of catalytic alkene hydrosilylation and hydroboration reactions using first-row transition metals. Emphasis is placed on defining advances in the field, what constitutes catalyst cost, safety, and important design features to enable precious metal-like reactivity, as well as new chemistry that is unique to first-row transition metals.

Benzoimidazole‐Pyridylamido Zirconium and Hafnium Alkyl Complexes as Homogeneous Catalysts for Tandem Carbon Dioxide Hydrosilylation to Methane

AbstractNeutral ZrIV and HfIV alkyl/amido complexes stabilized by a tridentate N ligand that contains a “rolling” heterodentate benzoimidazole fragment have been prepared and characterized. The ultimate nature of the ligand denticity, the electronic properties of the ligand binding pocket and the metal coordination environment are controlled by the protection/deprotection of the benzoimidazole NH group. The metal precursor used [MIV(Bn)4 or MIV(NMe2)4] also has an influence on the final coordination sphere of the complex; indeed, a permanent central pyridine dearomatization occurs in the presence of dimethylamido ancillary groups. DFT calculations on the real system have been used to elucidate the mechanism. Selected alkyl species from this series have been scrutinized for the tandem hydrosilylation of CO2 to CH4 in combination with the strong Lewis acid B(C6F5)3 using a variety of hydrosilanes. A positive effect of the hardness modification of the ligand donor atom set is observed in the catalytic outcomes. Indeed, κ3{N−,N,N−}ZrIV(Bn)2 catalyzes the process to methane selectively with a turnover frequency as high as 272 h−1 (at 96 % substrate conversion) almost twice as much as that claimed for the benchmark κ3{O−,O,O−}ZrIV(Bn)2 complex under similar experimental conditions.

Ni(I)-Hydride Catalyst for Hydrosilylation of Carbon Dioxide and Dihydrogen Generation: Theoretical Prediction and Exploration of Full Catalytic Cycle

We wish to report here the first theoretical prediction that a unique nickel(I) hydride complex NiIH(bpy) (bpy = 2,2′-bipyridine) 1 is a good catalyst for hydrosilylation of CO2 with hydrosilane (HSiR3) and dihydrogen (H2) generation via alcoholysis/hydrolysis of hydrosilane. Full catalytic cycles of these reactions were elucidated by density functional theory (DFT) calculations. In the CO2 hydrosilylation, the first step is CO2 insertion into the NiI–H bond of 1, which occurs easily to afford NiI(η1–OCOH)(bpy) species, in which charge transfer (CT) occurs from singly occupied molecular orbital (SOMO) corresponding to Ni–H antibonding orbital to LUMO of CO2. The next step is metathesis between NiI(η1–OCOH)(bpy) and HSiR3 to produce H(CO)OSiR3 and regenerate 1. This is rate-determining (ΔG°⧧ = 19.5 kcal mol–1). In the transition state of the metathesis, the Si atom takes a hypervalent trigonal-bipyramidal structure, suggesting that hydrosilane with electron-withdrawing substituents is good for this reaction. The use of 6,6′-dimethyl-2,2′-bipyridine (dmbpy), which has methyl groups at the ortho position to the N of bpy, substantially decreases the ΔG°⧧ value of the metathesis, suggesting that NiIH(dmbpy) is a better catalyst. In the dihydrogen generation via alcoholysis of hydrosilane by 1, the first step is metathesis between the O–H bond of ROH (R= Me or H) and the NiI–H bond of 1 to afford NiI(OR)(bpy) and dihydrogen molecule. Next step is the second metathesis between the NiI–OR bond and the Si–H bond of HSiR3 to yield R3Si(OR) and regenerate 1. The second metathesis occurs with a negligibly small ΔG°⧧ value, indicating that various hydrosilanes can be employed for this reaction. On the basis of these computational findings, it is predicted that 1 can catalyze two completely different reactions, CO2 hydrosilylation with hydrosilane and dihydrogen generation via alcoholysis/hydrolysis of hydrosilane.

Platinum Complexes with Chelating Acyclic Aminocarbene Ligands Work as Catalysts for Hydrosilylation of Alkynes.

This work describes the preparation of a series of platinum–aminocarbene complexes [PtCl{C(N=Ca(C6R2R3R4R5CONb))=N(H)R1}(CNR1)]a–b (8–19, 65–75% isolated yield) via the reaction of cis-[PtCl2(CNR1)2] (R1 = Cy 1, t-Bu 2, Xyl 3, 2-Cl-6-MeC6H34) with 3-iminoisoindolin-1-ones HN=Ca(C6R2R3R4R5CONbH) (R2–R5 = H 5; R3 = Me, R2, R4, R5 = H 6; R3, R4 = Cl, R2, R5 = H 7). New complexes 17–19 were characterized by elemental analyses (C, H, N), ESI+-MS, Fourier transform infrared spectroscopy (FT-IR), one-dimensional (1H, 13C{1H}), and two-dimensional (1H,1H correlation spectroscopy (COSY), 1H,13C heteronuclear multiple quantum correlation (HMQC)/1H,13C heteronuclear single quantum coherence (HSQC), 1H,13C heteronuclear multiple bond correlation (HMBC)) NMR spectroscopy, and authenticity of known species 8–16 was confirmed by FT-IR and 1H and 13C{1H} NMR. Complexes 8–19 were assessed as catalysts for hydrosilylation of terminal alkynes with hydrosilanes to give vinyl silanes, and complex [PtCl{C(N=Ca(C6H3(5-Me)CONb))=N(H)(2-Cl-6-MeC6H3)}{CN(2-Cl-6-MeC6H3)}]a−b (18) showed the highest catalytic activity. The catalytic system proposed operates at 80–100 °C for 4–6 h in toluene and with catalyst loading of 0.1 mol %, enabling the reaction of a number of terminal alkynes (PhC≡CH, t-BuC≡CH, and 4-(t-Bu)C6H4C≡CH) with hydrosilanes (Et3SiH, Pr3SiH, i-Pr3SiH, and PhMe2SiH). Target vinyl silanes were prepared in 48–95% yields (as a mixture of α/β isomers) and with maximum turnover number of 8.4 × 103. Hydrosilylation of internal alkynes (PhC≡CPh, Me(CH2)2C≡C(CH2)2Me, and PhC≡CMe) with hydrosilanes (Et3SiH, PhMe2SiH) led to the corresponding trisubstituted silylated alkenes in 86–94% yields. Initial observations on the mechanism of the catalytic action of platinum–ADC catalysts 8–19 suggested a molecular catalytic cycle.

Ligands with 1,10-phenanthroline scaffold for highly regioselective iron-catalyzed alkene hydrosilylation

Transition-metal-catalyzed alkene hydrosilylation is one of the most important homogeneous catalytic reactions, and the development of methods that use base metals, especially iron, as catalysts for this transformation is a growing area of research. However, the limited number of ligand scaffolds applicable for base-metal-catalyzed alkene hydrosilylation has seriously hindered advances in this area. Herein, we report the use of 1,10-phenanthroline ligands in base-metal catalysts for alkene hydrosilylation. In particular, iron catalysts with 2,9-diaryl-1,10-phenanthroline ligands exhibit unexpected reactivity and selectivity for hydrosilylation of alkenes, including unique benzylic selectivity with internal alkenes, Markovnikov selectivity with terminal styrenes and 1,3-dienes, and excellent activity toward aliphatic terminal alkenes. According to the mechanistic studies, the unusual benzylic selectivity of this hydrosilylation initiates from π–π interaction between the phenyl of the alkene and the phenanthroline of the ligand. This ligand scaffold and its unique catalytic model will open possibilities for base-metal-catalyzed hydrosilylation reactions.

Highly-active, graphene-supported platinum catalyst for the solventless hydrosilylation of olefins.

Herein we report the development of the first graphene-supported platinum catalyst that has demonstrated exceptional catalytic activity and stability for hydrosilylation reactions of olefins (TOF 4.8 × 106 h-1, TON = 9.4 × 106). The catalyst also exhibited functional group tolerance over a broad range of industrially relevant substrates with minimal metal leaching. In addition, the catalyst system was successfully translated into a packed bed platform for continuous hydrosilylation reactions.

Nano-dispersed platinum(0) in organically modified silicate matrices as sustainable catalysts for a regioselective hydrosilylation of alkenes and alkynes

Comparative analysis of the catalytic effect of Pt(0) nano-dispersed in siloxane matrices on the hydrosilylation of alkenes and alkynes.

A β-diketiminate manganese catalyst for alkene hydrosilylation: substrate scope, silicone preparation, and mechanistic insight.

The dimeric β-diketiminate manganese hydride compound, [(2,6-iPr2PhBDI)Mn(μ-H)]2, was prepared by treating [(2,6-iPr2PhBDI)Mn(μ-Cl)]2 with NaEt3BH. This compound was characterized by single crystal X-ray diffraction and found to feature high-spin Mn centres that exhibit strong magnetic coupling by EPR spectroscopy. Once characterized, [(2,6-iPr2PhBDI)Mn(μ-H)]2 was found to mediate the hydrosilylation of a broad scope of alkenes at elevated temperature. Aliphatic alkenes were found to undergo anti-Markovnikov hydrosilylation, while the hydrosilylation of styrenes using [(2,6-iPr2PhBDI)Mn(μ-H)]2 afforded Markovnikov's product. Importantly, this catalyst has also been employed for the cross-linking of industrially-relevant silicones derived from vinyl-terminated poly(dimethylsiloxane) and 1,2,4-trivinylcyclohexane with catalyst loadings as low as 0.05 mol%. To gain a mechanistic understanding of [(2,6-iPr2PhBDI)Mn(μ-H)]2-catalyzed olefin hydrosilylation, 4-tert-butylstyrene was added to [(2,6-iPr2PhBDI)Mn(μ-H)]2 and conversion to the monomeric Mn alkyl complex, (2,6-iPr2PhBDI)Mn(CH(CH3)(4- t BuPh)), was observed. Isolation of this secondary alkyl intermediate confirms that olefin insertion into the Mn-H bond dictates the observed regioselectivities. The importance of our mechanistic findings as they relate to recent advances in Mn hydrosilylation catalysis is described herein.

Cobalt–nickel alloy catalysts for hydrosilylation of ketones synthesized by utilizing metal–organic framework as template

The facile synthesis of CoNi@NC materials from a MOF precursor is reported along with the catalytic properties in ketone hydrosilylation.

The Emergence of Manganese-Based Carbonyl Hydrosilylation Catalysts.

In recent years, interest in homogeneous manganese catalyst development has intensified because of the earth-abundant and nontoxic nature of this metal. Although compounds of Mn have largely been utilized for epoxidation reactions, recent efforts have revealed that Mn catalysts can mediate a broad range of reductive transformations. Low-valent Mn compounds have proven to be particularly effective for the hydrosilylation of carbonyl- and carboxylate-containing substrates, and this Account aims to highlight my research group's contributions to this field. In our initial 2014 communication, we reported that the bis(imino)pyridine-supported compound (Ph2PPrPDI)Mn mediates ketone hydrosilylation with exceptional activity under solvent-free conditions. Silanes including Ph2SiH2, (EtO)3SiH, (EtO)2MeSiH, and (EtO)Me2SiH were found to partially reduce cyclohexanone in the presence of (Ph2PPrPDI)Mn, while turnover frequencies of up to 1280 min-1 were observed using PhSiH3. This led us to evaluate the hydrosilylation of 11 additional ketones and allowed for the atom-efficient preparation of tertiary and quaternary silanes. At that time, it was also discovered that (Ph2PPrPDI)Mn catalyzes the dihydrosilylation of esters (by way of acyl C-O bond hydrosilylation) to yield a mixture of silyl ethers with modest activity. Earlier this year, the scope of these transformations was extended to aldehydes and formates, and the observed hydrosilylation activities are among the highest obtained for any transition-metal catalyst. The effectiveness of three related catalysts has also been evaluated: (Ph2PPrPDI)MnH, (PyEtPDEA)Mn, and [(Ph2PEtPDI)Mn]2. To our surprise, (Ph2PPrPDI)MnH was found to exhibit higher carboxylate dihydrosilylation activity than (Ph2PPrPDI)Mn, while (PyEtPDEA)Mn demonstrated remarkable carbonyl hydrosilylation activity considering that it lacks a redox-active supporting ligand. The evaluation of [(Ph2PEtPDI)Mn]2 revealed competitive aldehyde hydrosilylation and formate dihydrosilylation turnover frequencies; however, this catalyst is significantly inhibited by pyridine and alkene donor groups. In our efforts to fully understand how (Ph2PPrPDI)Mn operates, a thorough electronic structure evaluation was conducted, and the ground-state doublet calculated for this compound was found to exhibit nonclassical features consistent with a low-spin Mn(II) center supported by a singlet PDI dianion and an intermediate-spin Mn(II) configuration featuring antiferromagnetic coupling to PDI diradical dianion. A comprehensive mechanistic investigation of (Ph2PPrPDI)Mn- and (Ph2PPrPDI)MnH-mediated hydrosilylation has revealed two operable pathways, a modified Ojima pathway that is more active for carbonyl hydrosilylation and an insertion pathway that is more effective for carboxylate reduction. Although these efforts represent a small fraction of the recent advances made in Mn catalysis, this work has proven to be influential for the development of Mn-based reduction catalysts and is likely to inform future efforts to develop Mn catalysts that can be used to prepare silicones.

Accessing Two‐Coordinate ZnII Organocations by NHC Coordination: Synthesis, Structure, and Use as π‐Lewis Acids in Alkene, Alkyne, and CO2 Hydrosilylation

Discrete two-coordinate ZnII organocations of the type (NHC)Zn-R+ are reported, thanks to NHC stabilization. In preliminary reactivity studies, such entities, which are direct cationic analogues of long-known ZnR2 species, act as effective and tunable π-Lewis acid catalysts in alkene, alkyne, and CO2 hydrosilylation.

N-heterocyclic carbene platinum complexes functionalized with a polyether chain and silyl group: Synthesis and application as a catalyst for hydrosilylation

GRAPHICAL ABSTRACT

Synthesis, Structure, and Reactivity of a Terminal Magnesium Hydride Compound with a Carbatrane Motif, [TismPriBenz]MgH: A Multifunctional Catalyst for Hydrosilylation and Hydroboration.

The tris[(1-isopropylbenzimidazol-2-yl)dimethylsilyl)]methyl ligand, [TismPriBenz], has been employed to form the magnesium carbatrane compound, [TismPriBenz]MgH, which possesses a terminal hydride ligand. Specifically, [TismPriBenz]MgH is obtained via the reaction of [TismPriBenz]MgMe with PhSiH3. The reactivity of [TismPriBenz]MgMe and [TismPriBenz]MgH allows access to a variety of other structurally characterized carbatrane derivatives, including [TismPriBenz]MgX [X = F, Cl, Br, I, SH, N(H)Ph, CH(Me)Ph, O2CMe, S2CMe]. In addition, [TismPriBenz]MgH is a catalyst for (i) hydrosilylation and hydroboration of styrene to afford the Markovnikov products, Ph(Me)C(H)SiH2Ph and Ph(Me)C(H)Bpin, and (ii) hydroboration of carbodiimides and pyridine to form N-boryl formamidines and N-boryl 1,4- and 1,2-dihydropyridines, respectively.

A Versatile Iridium(III) Metallacycle Catalyst for the Effective Hydrosilylation of Carbonyl and Carboxylic Acid Derivatives

A versatile iridium(III) metallacycle catalysed rapidly and selectively the reduction of a large array of challenging esters and carboxylic acids as well as various ketones and aldehydes. The reactions proceeded in high yields at room temperature by hydrosilylation followed by desilylation. Although the reactions of various aldehydes and ketones resulted exclusively in alcohols, the hydrosilylation of esters led to alcohols or ethers, depending on the type of substrate. Regarding the carboxylic acids, again the nature of the reagent controlled the outcome of the hydrosilylation reaction, either alcohols or aldehydes being formed.