Braided River Deposits Research Articles

The Fate of Bars in Braided Rivers

Ancient river deposits are important archives of past landscape conditions on planetary surfaces. On Earth, they host valuable groundwater, energy resources, and carbon-storage potential. Reconstructing details of paleochannel forms and movements refines our understanding of the controls on river behavior under different climate, landcover, and tectonic conditions, and improves predictions and models of subsurface reservoirs. While studies have shown detailed connections between channel kinematics and bar-deposit architecture in meandering river systems, similar connections between braided river movements and preserved braided river deposits have not been established. Here we explore the potential for connecting braided river deposits to paleochannel movements, form, and flow conditions, and we evaluate the controls on bar preservation using synthetic stratigraphy generated with a numerical morphodynamic model. We investigate how attributes of channel morphodynamics, like channel widening or braiding intensity, impact bar deposits’ preservation, scale, geometry, and architecture. We then assess how the scale, preservation, and facies composition of bar deposits reflect formative flow conditions of the channel. Our results demonstrate that no diagnostic signature of braided channel morphodynamics is recorded in bar-deposit geometry, facies, or preservation patterns. Rather, the unique local history of thread movements combines stochastically to preserve or rework bar deposits, and the timing of channel avulsion is the dominant control on bar preservation. Our results also show that representative paleochannel flow conditions will likely be accurately reflected in aggregate observations of braid bar deposits within channel-belt sandbodies at a regional or member/formation scale. These results demonstrate the need for broad sampling and statistical approaches to subsurface prediction and paleo-flow reconstruction in ancient, braided river deposits.

Scour-depth variability controls channel-scale stratigraphy in experimental braided rivers

ABSTRACT Braided rivers distribute sediment across landscapes, often forming wide channel belts that are preserved in stratigraphy as coarse-grained deposits. Theoretical work has established quantitative links between the depth distribution of formative channels in a braided river and the geometry of their preserved strata. However, testing these predictive relationships between geomorphic process and stratigraphic product requires examining how braided rivers and their deposits coevolve, with high resolution in both space and time. Here, using a series of four runs of a physical experiment, we examine the controls of water discharge and slope on the resulting geometry of preserved deposits. Specifically, we focus on how a twofold variation in water discharge and initial riverbed slope affects the spatiotemporal distribution of channel depths and the geometry of preserved deposits of a braided river. We find that the channel depths in the laboratory experiment are described by a two-parameter gamma distribution and the deepest scours correspond to zones of erosion at channel-belt margins and channel-thread confluences in the channel belt. We use a reduced-complexity flow model to reconstruct flow depths, which were shallower compared to channel thalweg depths. Synthetic stratigraphy built from timeseries of topographic surfaces shows that the distribution of cut-and-fill-unit thickness is invariant across the experiments and is determined by the variability in scour depths. We show that the distribution of cut-and-fill-unit thickness can be used to reconstruct formative-channel-depth distributions and that the mean thickness of these units is 0.31 to 0.62 times the mean formative flow depth across all experiments. Our results suggest that variations in discharge and slope do not translate to measurable differences in preserved cut-and-fill-unit thickness, suggesting that changes in external forcings are likely to be preserved in braided river deposits only when they exceed a certain threshold of change.

A fluvial‐aeolian system in response to aridification during the Late Mesozoic, Junggar Basin, Central Asia

AbstractAridification of Central Asia in the Late Mesozoic led to drastic environmental changes characterized by widespread aeolian deposits. We systematically investigated fluvial‐aeolian deposits in the Middle Jurassic Toutunhe Formation, Upper Jurassic Kalazha Formation, and Lower Cretaceous Tugulu Group in the Junggar Basin to the north of the Tianshan Orogenic Belt via unmanned aerial vehicle‐based photogrammetry, scanning electron microscope, grain‐size analysis, and detrital zircon geochronology. Paludal and deltaic environments transitioned to a fluvial‐aeolian environment from the late Middle Jurassic to the Late Jurassic. Fan delta and incisive braided river deposits accumulated in the earliest Cretaceous and evolved into a lacustrine environment with aeolian deposits in the lakeshore. Aeolian deposits are characterized by moderate‐ to well‐sorted and subangular to subround sandstones with large‐scale, high‐dip cross‐bedding, inversely graded lamination, dominant saltation grains, crescent‐shaped, and dish‐shaped impact structures. Aeolian deposits contain heavy minerals including more ilmenite, zircon, garnet, and, tourmaline and less magnetite and epidote than the fluvial deposits. The preserved aeolian sediments of the Kalazha Formation extend west–east for more than 100 km, suggesting a wide desert area during the latest Jurassic. The detrital zircon age patterns indicate that the provenance of the aeolian deposits was similar to that of coeval fluvial deposits. The cooccurrence of fluvial and aeolian deposits and the similar provenances but orthogonal flow directions indicate that the aeolian deposits were mainly sourced from the nearby fluvial material within the basin. The evolution of the fluvial‐aeolian system responded to a complete base‐level cycle controlled by the aridification and tectonics. Due to decreased sediment supply caused by aridification, the base level rose, leading to the change from braided rivers to meandering rivers, along with the deposition of aeolian sediments. Due to the tectonic reactivation in the Late Jurassic, the base level fell, causing the occurrence of alluvial fans and the expansion of the aeolian sediments. Previous studies revealed that the Tianshan in the Jurassic exhibited low relief. The fluvial‐aeolian system played an important role in maintaining the limited relief in southern Central Asia.

Detrital zircons and heavy minerals from the Palu Formation, Sulawesi, Indonesia: constraints on exhumation of the Palu Metamorphic Complex and drainage evolution

The Palu Formation, previously known as the Celebes Molasse in the Palu area, is understudied and was previously considered to be associated with the Pliocene collision between an Australian-derived microcontinent (Banggai Sula) and the eastern margin of Sundaland (West Sulawesi). Here, we present sedimentological, heavy mineral and zircon geochronological data to provide insights into sediment provenance and to elucidate Neogene tectonic activity in Sulawesi. These analyses suggest that the Pleistocene Palu Formation comprises synorogenic alluvial fan to braided river deposits that record the rapid uplift of metamorphic and granitoid rocks in the Neck and west Central Sulawesi. The Palu Formation is characterized by predominant granitoid and metamorphic clasts and heavy mineral assemblages dominated by pyroxene, amphibole and garnet. Detrital zircons record youngest grain ages of c. 2.5 and 3.0 Ma with a significant Pliocene age population and subsidiary Eocene, Cretaceous, Jurassic and Late Triassic age peaks. Rapid uplift and erosion associated with mountain building shaped the topography and influenced the evolution of Palu River networks. Supplementary material : Complete location, heavy mineral and detrital zircon geochronology datasets are available at https://doi.org/10.6084/m9.figshare.c.7033388 Thematic collection: This article is part of the Mesozoic and Cenozoic tectonics, landscape and climate change collection available at: https://www.lyellcollection.org/topic/collections/mesozoic-and-cenozoic-tectonics-landscape-and-climate-change

Sedimentary Characteristics and Internal Architecture of a Sandy Braided River: Insights from a Numerical Model

Sandy braided river deposits are widely observed in ancient stratigraphic records and modern sedimentary basins. Frequent channel migration shapes intricate internal architecture, while research on its influence on fine sedimentary architecture remains limited. This study utilizes DELFT3D to simulate and analyze the sedimentary processes and architecture of the channel bar in a sandy braided river. The results show that: (1) The channel bar consists of downstream accretion (DA), lateral accretion (LA), and aggradational accretion (AA). (2) Channel bars can be divided into three types: unit bars, compound bars, and complex compound bars. Unit bars are lobate-shaped and consist of multiple accretions, including DA in the core, AA layered above, and LA deposited on the sides. Compound bars result from the migration and amalgamation of multiple unit bars, characterized by a greater number of accretions. Compound bars can further be classified as DA-dominated or LA-dominated, depending on the dominant accretion type. Complex compound bars form from the merging of multiple unit bars and compound bars. In this paper, insights from a braided river on its sedimentary processes and evolution may help to improve river management and water resources research. The in-depth understanding of sedimentary architecture on channel bars can be utilized for detailed subsurface oil and gas reservoir characterization.

The Architecture Characterization of Braided River Reservoirs in the Presence of Horizontal Wells—An Application in a Tight Gas Reservoir in the North Ordos Basin, China

The study of the reservoir architecture in braided river systems has significant implications for the exploitation of remaining oil and gas reserves. However, due to the complexity of the braided river deposition process, the architecture patterns are diverse and intricate. Limited by the quality of seismic data and well network density, the characterization of underground reservoir architecture often entails considerable uncertainty. This paper investigates the architecture elements, stacking patterns, and significance of oil and gas development in the braided river deposition of the Jin 58 well area in the northern part of the Ordos Basin through typical field outcrop and core observations, and by making full use of horizontal well data. The study reveals that the Jin 58 well area is mainly characterized by four types of architecture units: braided channel, channel bar, overbank, and flood plain. Based on the data from horizontal and vertical wells, four identification criteria for single sand bodies are determined, and the vertical stacking and lateral juxtaposition styles of the architecture units, as well as the architecture patterns and internal features of the channel bar, are summarized. It is confirmed that composite sand bodies have better productivity. A three-dimensional architecture model of the braided river is established based on the results of architecture analysis. The accuracy of the architecture analysis is validated through numerical simulation, providing a basis for subsequent well deployment and other related activities.

Sedimentary characteristics of sandy braided river deposits and factors controlling their deposition: A case study of the lower Shihezi Formation in the northern ordos basin, China

Fluvial sandstones have been identified as significant reservoirs due to their importance in global hydrocarbon exploration. The current study investigated the sedimentary characteristics and temporal evolution of sandy braided river systems as well as the factors controlling their deposition in the Lower Shihezi Formation (H1-1 to H1-4 sub-member) of the Xinzhao area in the northern Ordos Basin using well logs, core intervals, whole rock geochemical data, and other measured reservoir parameters. Within the braided river deposits, five architectural elements were identified: multistory braided channel, single-story braided channel, sandy braid bar, overbank, and floodplain. The evolution of architectural elements in the Lower Shihezi Formation is closely related to paleoclimatic conditions and tectonic activity. Climate influences sediment accumulation through its effect on terrestrial detrital input, and tectonism influences stacking patterns and architectural style by influencing subsidence rates and accommodation changes. High sediment deliveries and high-energy hydrodynamic conditions in warm and humid climates, combined with low subsidence rates and low accommodation/sediment supply (A/S) ratios, can result in the formation of highly amalgamated braided channels and braid bars as well as complex vertical stacking patterns and aggradational processes in the H1-2 and H1-3 sub-members. Conversely, the dry and hot climates, high subsidence rates and associated high A/S ratios are responsible for the low detrital influx input, stacking of isolated sand bodies, and high preservation of overbank and floodplain deposits in the H1-4 sub-member. Considering the accommodation-based systems tracts, we contend that climate and tectonism both have a significant impact on the evolution and architectural styles of sandy braided river deposits. It is suggested that climates control the stacking pattern of fluvial sand bodies during high accommodation systems tracts, whereas both climates and accommodation spaces influence architectural styles and the degree of sand body amalgamation during low accommodation systems tracts. Considering the thick, highly amalgamated sand bodies with better reservoir properties and high vertical and lateral connectivity in the H1-2 and H1-3 sub-members, we posit that these stacked multistory sand bodies should be the preferential targets for hydrocarbon exploration. The findings of this study can further elucidate the architectural styles and factors that influence the deposition of sandy braided river systems under complex tectonic and climatic conditions.

Sequence architecture, depositional system evolution and controlling factors in a lacustrine basin: a case study from Changdi Area, Bohai Bay Basin, Eastern China

AbstractThe Paleogene Shahejie and Dongying formations of the eastern Bohai Bay Basin contain >500 m fluvial-deltaic deposits and >600 m deltaic-lacustrine deposits, both of which are important for oil and gas exploration. This study aims to figure out the deposition system distribution within the sequence stratigraphy and predict the exploration target. Sequence boundaries are recognized by unconformities in the seismic profiles and abrupt changes in the well-logging curves (acoustic, spontaneous potential, natural gamma-ray and resistivity), and two second-order and five third-order sequences (SQs1, SQs3 in the Shahejie Formation and SQd1-SQd3 in Dongying Formation) are identified. Four types of depositional system and distribution are determined by well-logging profiles, cores, relative sand content and root-mean-square seismic attributes. The SQs3 sequence is predominantly fan deltas and lacustrine deposits, the SQs1 sequence is predominantly shallow lacustrine deposits, the SQd3 sequence is predominantly braided-river delta, semi-deep lacustrine, and turbidite fan, and the SQd2 sequence is predominantly braided-river delta deposits, whereas the SQd1 sequence is predominantly braided-river deposits. The controlling factors are determined by basin subsidence simulation and fossil data of biological palynology, indicating that tectonic activity is the main controlling factor in SQs3 and SQd3 while climate is the main controlling factor in the SQs1, SQd2 and SQd1 sequences. Combined with the physical properties of sandstone, it is concluded that the beach bar in the SQs1 sequence, turbidite fan in the SQs3 and SQd3 sequences, and thick sandstone in the SQd2 sequence are the important exploration targets.

Sedimentary characteristics of Chang 2 and its relationship with sand body superimposition in Resiwan oil region

On the basis of core observation, logging interpretation and previous research results, the sedimentary microfacies characteristics of each sub layer of the Chang 2 oil-bearing formation in the Resiwan oil area of Zichang Oilfield and the superimposed relationship of sand bodies are studied. The results show that the Chang 2 member in the Resiwan oil area of Zichang oilfield belongs to braided river deposits, and the study area mainly develops sedimentary microfacies such as river island, channel lag deposits and floodplain. The vertical superimposition types of sand bodies in Chang 22 oil-bearing formation are multilayer superimposition sand bodies and massive thick sand bodies, which are also the dominant sand body combination of oil-bearing reservoirs in the study area. Chang 21 oil-bearing formation is dominated by thin interbeds. Flood plains are developed at the top of Chang 23 oil-bearing formation, and massive thick sandstone is developed at the middle and lower parts, but the horizontal continuity is poor. Horizontally, the sand bodies of Chang 22 oil-bearing formation are mainly overlapped horizontally and cut laterally, which improves the connectivity of the sand bodies to a certain extent. Chang 21 and Chang 22 are mostly isolated sand bodies, and the sand bodies are wrapped in mud, resulting in poor oil and gas display. The contact pattern of sand bodies in the study area is mainly affected by sedimentary microfacies and river water volume.

Reconstructing paleosinuosity and sedimentary mass balance in the Upper Triassic Shinarump paleoriver in Utah and Arizona, U.S.A.

ABSTRACT The Upper Triassic Shinarump Member forms the basal part of the Chinle Formation in the western interior United States and was deposited by a continental-scale fluvial system which ran approximately 2,500 km from the Ouachita Orogen in the east into the Auld Lang Syne marine basin in the west. Previous studies of the Shinarump Member have concluded that the deposits represent a braided-river system but have not produced estimates for paleo-sinuosity and paleo-discharge. Recent advances in sedimentology allow detailed morphometric assessment of the nature of the river system that deposited the Shinarump Member enabling us to produce quantitative estimates for these parameters. We therefore present architectural data from the Shinarump Member in northern Arizona and Utah, supported by lithofacies data and 39 sandstone petrographic analyses, and a dataset of 4,298 paleocurrent measurements from trough cross-strata. Lithofacies and architectural analysis supports previous interpretations of the Shinarump and equivalent strata as braided-river deposits. Petrographic analysis shows that the Shinarump is dominated by monocrystalline quartz and exhibits low spatial variation in composition, ranging from 85.4% to 99.8% total quartz. Paleocurrent measurements are used to calculate the channel sinuosity of the fluvial system as varying between 1.02 and 1.77, with a median value of 1.33 (compared to the Yangtze River, ranging from 1.05 to 1.50 and the Ganges–Brahmaputra, ranging from 1.05 to 1.13 in their lower 250 km). Paleohydrological estimates using data from the architectural surveys produce slope estimates from 2.01 × 10–4 to 6.51 × 10–4 and bankfull discharge estimates from 4.36 × 103 m3 s–1 to 2.38 × 104 m3 s–1 for individual channels, comparable to extant continental-scale fluvial systems. Estimates of lifetime sediment transport volume range from 7.75 × 104 km3 to 6.09 × 105 km3, which are in order-of-magnitude agreement with estimates for the volume of the depositional sink (1.35 × 105 km3 to 4.17 × 105 km3). These results demonstrate the potential for paleohydrologic estimates to provide new avenues for analysis of heavily studied units.

Constraining the aggradation mode of Pleistocene river deposits based on cosmogenic radionuclide depth profiling and numerical modelling

Abstract. Pleistocene braided-river deposits commonly represent long periods of non-deposition or erosion that are interrupted by rapid and short aggradation phases. When dating these sedimentary sequences with in situ-produced cosmic radionuclides (CRNs), simple concentration depth profiling approaches often fall short, as they assume that the alluvial sedimentary sequence has been deposited with a constant and rapid aggradation rate and been exposed to cosmic radiations afterwards. Numerical modelling of the evolution of CRNs in alluvial sequences permits one to account for aggradation, non-deposition and erosion phases and can simulate which scenarios of aggradation and preservation most likely represent the river dynamics. In this study, such a model was developed and applied to a Middle Pleistocene gravel sheet (Zutendaal gravels) exposed in NE Belgium. The model parameters were optimised to the observed 10Be and 26Al concentrations of 17 sediment samples taken over a depth interval of 7 m that constitutes the top of a gravel sheet up to 20 m thick. In the studied sedimentary sequence, (at least) three individual aggradation phases that were interrupted by non-deposition or erosion can be distinguished, each interruption lasting ∼ 40 kyr. The age for the onset of aggradation of the upper 7 m of the gravel sheet was further constrained to 654-62+218 ka. This age, within error limits, does not invalidate previous correlations of the gravel sheet with the Cromerian Glacial B and Marine Isotope Stage (MIS) 16. The deposition of the entire gravel sheet likely represents more than one climatic cycle and demonstrates the importance of accounting for the depositional modes of braided rivers when applying in situ cosmogenic radionuclide techniques.

Pore throat heterogeneity of different lithofacies and diagenetic effects in gravelly braided river deposits: Implications for understanding the formation process of high-quality reservoirs

Tight gas sandstone is a unique kind of unconventional hydrocarbon resource in that its intricate pore throat structure governs reservoir physical properties and gas reservoir productivity. However, the effect of differential diagenesis of various lithofacies on the heterogeneity of pore throat structure remains unclear. In this paper, a series of experiments were integrated to evaluate pore throat structures and fractal characteristics of the different lithofacies in a tight sandstone gas reservoir, and followed by a study of the impact of diagenetic alteration on them. Results demonstrate that the mineral composition, dominant pore types, pore throat structural parameters, fractal dimension, and physical properties of various lithofacies are notably different, which is mostly attributable to diagenetic alteration variability. There are more primary pores and less clay mineral content in coarser lithofacies. Pebbly coarse-grained sandstone and sandy conglomerate reservoirs that have undergone strong dissolution have more composite pores composed of residual intergranular pores and dissolution pores, which help to form a homogeneous pore throat system with good connectivity, resulting in the best reservoir quality. Due to the strong compaction and high clay mineral content filling pores and throats in medium-grained sandstone and fine-grained sandstone lithofacies, a large number of primary pores were lost, and throats were blocked, which easily formed intercrystalline pores, leading to poor reservoir quality. Coarse-grained sandstone reservoirs with moderate clay mineral content have undergone moderate compaction and dissolution and have moderate reservoir quality. Filamentous illite is the most destructive clay mineral to pore throat connectivity. Intergranular dissolution pores and moldic pores contribute significantly to the physical properties of pebbly coarse-grained sandstone and sandy conglomerate reservoirs. Pebbly coarse-grained sandstone and sandy conglomerate lithofacies are considered high-quality reservoirs with greater development potential for tight gas. This work has important guiding significance for the prediction of high-quality reservoirs in similar tight sandstone reservoirs.

From desert to monsoon: irreversible climatic transition at\u2009~\u200936\xa0Ma in southeastern Tibetan Plateau

Although there is increasing evidence for wet, monsoonal conditions in Southeast Asia during the late Eocene, it has not been clear when this environment became established. Cenozoic sedimentary sequences constrained by radiometrically dated igneous rocks from the Jianchuan Basin in the southeast flank of Tibetan Plateau now provide a section whose facies and climatic proxies determine this evolution. Semi-arid conditions had dominated the region since Paleocene controlled by the northern sub-tropical high pressure system, culminating in mid Eocene when desert dunes developed. From 36 Ma, the basin began to accumulate swamp sediments with coals, together with synchronous braided river deposits and diversified pollen assemblages, indicating significant increase in precipitation. This remarkable transition from dry to wet conditions precedes the Eocene/Oligocene boundary at 34 Ma, thus excluding general global cooling as the prime driver. We propose that uplift of Tibetan Plateau might have reached a threshold elevation by that time, operating through thermal and dynamic forcing, causing the inception or significant intensification of monsoonal rains to penetrate into this downwind locality.

Reconstructing the depositional history of Pleistocene fluvial deposits based on grain size, elemental geochemistry and in-situ 10Be data

Constraining depositional phases in braided river deposits can be challenging if only based on sedimentology or geochronology. In this paper, we explored how different data sources can provide complementary information on the depositional history of Pleistocene fluvial deposits. The study was realized on the Zutendaal gravels that outcrop in Northeastern Belgium. In an 8 m high exposure of gravel sheets, we collected bulk samples that were processed for grain size, elemental geochemistry and cosmogenic radionuclides. After dry sieving, we derived the D10, D50, D90, gravel and sand content. From the elemental geochemistry of the bulk samples, we calculated the Ti/Zr and Cr/Zr ratios as proxies for provenance, the Al2O3/SiO2 and Ba/Sr ratios for hydrolysis, and the MnO, Fe2O3 concentrations and the Fe2O3+MnOAl2O3 ratio for oxidation. The 10Be concentration-depth profiles are informative to identify phases of landscape stability characterized by depositional hiatuses. To verify the existence of any aberrant variation in 10Be concentration associated to provenance, the in-situ 10Be concentrations were contrasted with provenance and weathering indices. Differences in grain size, elemental geochemistry and in-situ 10Be between sedimentary units were evaluated based on Mann-Whitney tests, while Spearman correlation tests informed us on the co-variation between data sources. The outcrop in the Zutendaal gravels contains three depositional units with significant differences in grain size and chemical weathering extent, and representing distinct 10Be accumulation phases. The absence of correlation between provenance and oxidation proxies indicates that weathering is essentially intraformational or post-depositional. Sedimentary hiatuses were identified based on fining upward sequences and 10Be concentration-depth profiles, whereby local deviation in 10Be concentration at the top of the fining upward sequence provided information on the duration of the hiatus. The case study illustrates how co-variations in weathering, provenance, granulometry indices and 10Be concentration are informative for the depositional history of fluvial sediments, and landscape stability during the Pleistocene.

U-PB ages and environmental evolution of the De La Cuesta Formation (late Paleozoic): Record of the Choiyoi Volcanism in the retroarc area of the Paganzo Basin, Western Gondwana

This paper examines the relationship between the sedimentation in the retroarc Paganzo Basin and the activity of the magmatic arc developed in the neighboring Andean Cordillera during the Late Pennsylvanian-Cisuralian. The temporal relationships between the Choiyoi Volcanism (Andean region) and the retroarc Paganzo Basin were investigated according to three lines of research: 1. Sedimentology and lithostratigraphy of the De La Cuesta Formation, 2. Geochronology and, 3. Biostratigraphy.Paleoenvironmental studies indicate that small alluvial fans (facies association A) and braided river (facies association B) deposits prevailed in the lower third of the De La Cuesta Formation, which includes a thin intercalation of shallow marine sediments only present in the western part of the area (facies association C). A progressive decrease in the energy of the fluvial systems occurred at the middle part of the unit, where dominant finning-upward successions correspond to meandering rivers (facies association D). In contrast, interbedded sandstones and mudstones were subsequently deposited by low-energy ephemeral rivers (facies association E). Finally, the upper third of the De La Cuesta Formation corresponds to eolian sandstones (facies association F) and shallow water bodies deposits, including evaporites, limestones, and tuffs (facies association G) sedimented under semiarid to arid conditions with periods of explosive volcanism.A U–Pb age of 278.84 Ma was obtained from a tuff level at the uppermost part of the De La Cuesta Formation (facies association G). This age, together with one previously obtained of 311.89 ± 0.21 Ma corresponding to the base of the unit, indicate that the De La Cuesta Formation is Moscovian-Kungurian in age and that it was mostly deposited before the main phase of the Choiyoi magmatism, synchronically with the so-called Pre-Choiyoi magmatism. Furthermore, a rich palynological assemblage belonging to the Lueckisporites/Weylandites Biozone (LW), recovered from deposits of the facies association G, is equivalent to the Lueckisporites virkkiae (Lv) Biozone from the Paraná Basin (Brazil), pointing out a Kungurian age for these biostratigraphic units.The new radiometric age and the palynological taxa recovered from the top of the De La Cuesta Formation (facies association G) confirm a Kungurian age for this interval, establishing a key level for correlation between the sedimentation in the retroarc with the onset of the Choiyoi Volcanism in the magmatic arc.

Sedimentary characteristics of distributive fluvial system in arid area: A case study of the Shule River distributive fluvial system, NW China

Based on detailed investigation of the modern sedimentation of the distributive fluvial system of Shule River and the data of unmanned aerial vehicle (UAV) aerial photography and satellite remote sensing, the sedimentary characteristics and differences of distributive fluvial system in arid areas are analyzed. By comparing the changes in slope, river morphology and sedimentary characteristics in different sections from the apex to the toe, the distributive fluvial system of Shule River can be divided into three facies belts: “proximal”, “middle” and “distal”. The proximal belt has the largest slope and strongest hydrodynamic condition, mainly appears as large-scale braided river deposits; the fluvial bars in this belt are mainly composed of gravels, the gravels have good roundness and certain directionality, and are medium-large boulders, with low sand content; the main microfacies in this belt are braided channel and flood plain. The middle belt with slope smaller than the proximal belt, is mainly composed of braided bifurcating river deposits. Due to branching and infiltration, this belt has weaker hydrodynamic conditions, so some of the distributive rivers dry up, appearing as ephemeral rivers. This belt has small lenticular sandbodies, fine to medium gravels, higher sand content, and mainly braided channel, flood plain and aeolian dune microfacies. The distal belt has the smallest slope and flat terrain, where the river begins to transform from braided river to meandering river, the sediment is mainly sand. Due to the influence of slope, this belt has weaker erosion toward source and stronger lateral erosion, and point bars developing around the edge of the active lobes. In this belt, the river is completely meandering, and the main microfacies are braided channel, meandering channel, flood plain, aeolian dune, lake and swamp.

Evidence for variable precipitation and discharge from Upper Cretaceous–Paleogene fluvial deposits of the Raton Basin, Colorado–New Mexico, U.S.A.

ABSTRACTThe Raton Basin of Colorado–New Mexico, USA, is the southeasternmost basin of the Laramide intraforeland province of North America. It hosts a thick succession (4.5 km or 15,000 ft) of Upper Cretaceous to Paleogene marine and continental strata that were deposited in response to the final regression of the Western Interior Seaway and the onset of Laramide intraforeland deformation. The Upper Cretaceous–Paleogene Raton and Poison Canyon formations were previously described as meandering river and braided river deposits that represented distal and proximal members of rivers that drained the basin-bounding Sangre de Cristo–Culebra uplift. We present new observations of fluvial-channel architecture that show that both formations contain the deposits of sinuous fluvial channels. However, fluvial channels of the Raton Formation formed in ever-wet environments and were affected by steady discharge, whereas channels of the overlying Poison Canyon Formation formed in drier environments and were affected by variable discharge. The apparent transition in fluvial discharge characteristics was coeval with the progradation of fluvial fans across the Raton Basin during the Paleocene, emanating from the ancestral Sangre de Cristo–Culebra uplift. The construction of fluvial fans, coupled with the sedimentary features observed within, highlights the dual control of Laramide deformation and early Cenozoic climatic patterns on the sedimentary evolution of the Raton Basin.

Evolution of Jurassic intertrap deposits in the Parnaíba Basin, northern Brazil: The last sediment-lava interaction linked to the CAMP in West Gondwana

The opening of the Central Atlantic Ocean was accompanied by ascending plume zones that generated large igneous provinces (LIPs), such as the Central Atlantic Magmatic Province (CAMP), with voluminous lava flows and outpourings. One of the best records of the CAMP in the West Gondwana is the Jurassic volcanic-sedimentary succession exposed in the western Parnaíba Basin, northern Brazil. Diagenetic and hydrothermal processes are discussed, focusing on the lava-sediment interaction. The siliciclastic sediments called “intertrap deposits” record a wet desert system characterized by fluvial-aeolian and shallow lake deposits engulfed by lavas of the CAMP at approximately 200–202 Ma. The facies and petrographic studies, based on a drill core and outcrops, led to the interpretation of the palaeoenvironmental and diagenetic evolution of the intertrap deposits. The intertrap deposits are sandwiched by basalts and may be organized in seven sedimentary facies, grouped into two facies associations: 1) ephemeral braided river deposits (FA1), which consist of medium- to coarse-grained pebbly sandstone with poorly sorted angular to sub-rounded grains (basaltic fragments and quartz) and low-angle cross-bedding, even-parallel stratification, and trough cross-stratification, and 2) pond/shallow lake deposits (FA2) composed of tabular beds of sandstone/siltstone rhythmite and laminated mudstone. The main architectural elements of intertrap deposits are 1) channels on volcanic substrate, 2) sand sheets deposited over pre-existent lava topography, 3) tabular beds with laminated rhythmites, and 4) sand-filled fissures/fractures and clastic dykes. The intensification of magmatic processes due to the disruption of Pangaea promoted the formation of extensive volcanic plains, whereas wet desert settings were developed during the quiescent intervals between lava flow episodes. Fluvial channels with subaqueous dunes and sand sheets were incised into the basaltic substrate. The abandoned fluvial plains were affected by flash floods that promoted mechanical infiltration of clays, forming coatings over grains. The heat flow and hydrothermal activity of volcanic rocks increased the devitrification of glassy clasts, releasing silica and precipitating low-temperature authigenic mineral assemblages. The most common pore-filling process was the massive precipitation of early diagenetic-hydrothermal minerals, including smectite, chalcedony, poikilotopic zeolite, megaquartz, and haematite, which partially obliterated the primary porosity and permeability. These exceptional conditions of cementation triggered by basalt eruptions precluded the modification of a primary framework by late stages (post-Jurassic) burial diagenesis. The intertrap sandstones represent the last lava-sediment interaction related to the CAMP recorded in West Gondwana.

Tectonic Switch From Triassic Contraction to Jurassic-Cretaceous Extension in the Western Tarim Basin, Northwest China: New Insights Into the Evolution of the Paleo-Tethyan Orogenic Belt

We use stratigraphic, sedimentological, and borehole data and seismic profiles from the western Tarim Basin to document its Mesozoic tectonic evolution. A nearly 60-km-wide, Triassic fold-and-thrust belt along the southwestern margin of Tarim Basin is unconformably overlain by a Jurassic-Cretaceous sedimentary sequence along a regional angular unconformity. The Lower-Middle Jurassic strata consist mainly of an upward-fining sequence ranging from terrestrial conglomerates to turbidite deposits, which represent the products of an initial rift stage. Palaeocurrent analyses show that sediments for these rift deposits were derived from the paleo-Kunlun and paleo-Tienshan Mountains to the southwest and northern, respectively. The overlying Upper Jurassic-Cretaceous series consist of coarse-grained, alluvial fan to braided river deposits in the lower stratigraphic member, and lagoonal mudstones and marine carbonates in the upper member. These finer-grained rocks were deposited in a subsiding basin, indicating that a significant change and reorientation in the drainage system should have occurred within the basin during the Early Cretaceous. The western Tarim Basin evolved from a syn-rift stage to a post-rift stage during the Jurassic-Cretaceous. A post-orogenic stretch developed due to the evolution of the Paleo-Tethyan orogenic belt in Central Asia is a likely geodynamic mechanism for this major tectonic switch from a contractional episode in the Triassic to an extensional deformation phase in the Jurassic-Cretaceous.

Sedimentary facies and diagenesis control on petrophysical properties of sandstone reservoirs: A case study from the Permian Sulige Gas Field, Ordos Basin (Central China)

The sedimentary characteristics and petrophysical properties of the reservoir of the second/lower member of the Lower Permian Shanxi Formation (P1s2) in Sulige Gas Field, Central China are studied by means of thin section petrography and scanning electron microscopy. This article highlights the relationship between reservoir quality and sedimentary environments, explains the differences in reservoir petrophysical properties in different sedimentary environments, discusses the influence of clastic components and authigenic minerals on the reservoir, and finally, provides the basis for the prediction of relatively high‐quality reservoir in P1s2 of the study area. The results show that the sandstones formed as a meandering river deposit in the south of the study area are fine‐grained, mainly composed of lithic fragments of quartz sandstone, metamorphic, and volcanic rock lithic fragment, with high content of matrix and poor sorting, average porosity of 5.09%, and average permeability of 0.20 × 10−3 μm2. The braided river sedimentary deposits in the north are coarse‐grained, mainly composed of quartz sandstone sedimentary rock lithic fragment, with low content of matrix, good sorting, and more developed dissolution pores. The average porosity is 6.16%, and the average permeability is 0.53 × 10−3 μm2. Among the authigenic minerals, siderite, calcite, and illite block, the pores between the grains reduce the porosity. Siliceous cement often indicates better reservoir petrophysical properties. The siliceous cement is more common in braided river deposits in the north area, in which the channel bar detailed facies are conducive to retain more primary pores or form secondary pores, thus forming better reservoirs.