Blood-contacting Devices Research Articles

Highly Stable Hierarchically Structured All-Polymeric Lubricant-Infused Films Prevent Thrombosis and Repel Multidrug-Resistant Pathogens.

Thrombus formation and infections caused by bacterial adhesion are the most common causes of failure in blood-contacting medical devices. Reducing the interaction of pathogens using repellent surfaces has proven to be a successful strategy in preventing device failure. However, designing scale-up methodologies to create large-scale repellent surfaces remains challenging. To address this need, we have created an all-polymeric lubricant-infused system using an industrially viable swelling-coagulation solvent (S-C) method. This induces hierarchically structured micro/nano features onto the surface, enabling improved lubricant infusion. Poly(3,3,3-trifluoropropylmethylsiloxane) (PTFS) was used as the lubricant of choice, a previously unexplored omniphobic nonvolatile silicone oil. This resulted in all-polymeric liquid-infused surfaces that are transparent and flexible with long-term stability. Repellent properties have been demonstrated using human whole blood and methicillin-resistant Staphylococcus aureus (MRSA) bacteria matrices, with lubricated surfaces showing 93% reduction in blood stains and 96.7% reduction in bacterial adherence. The developed material has the potential to prevent blood and pathogenic contamination for a range biomedical devices within healthcare settings.

A dual-action nitric oxide-releasing slippery surface for extracorporeal organ support: Dynamic in vitro hemocompatibility evaluation.

Numerous biomaterials have been developed for application in blood-contacting medical devices to prevent thrombosis; however, few materials have been applied to full-scale devices and evaluated for hemocompatibility under clinical blood flow conditions. We applied a dual-action slippery liquid-infused (LI) nitric oxide (NO)-releasing material modification (LINO) to full-scale blood circulation tubing for extracorporeal lung support and evaluated the tubing ex vivo using swine whole blood circulated for 6h at a clinically relevant flow. LINO tubing was compared to unmodified tubing (CTRL) and isolated LI and NO-releasing modifications (n=9/group). The primary objective was to evaluate safety and blood compatibility of this approach, prior to progression to in vivo testing of efficacy in animal models. The secondary objective was to evaluate coagulation outcomes relevant to hemocompatibility. No untoward effects of the coating, such as elevated methemoglobin fraction, were observed. Additionally, LINO delayed platelet loss until 6h versus the reduction in platelet count in CTRL at 3h. At 6h, LINO significantly reduced the concentration of platelets in an activated P-selectin expressing state versus CTRL (32 ± 1% decrease, p=.02). Blood clot deposition was significantly reduced on LINO blood pumps (p=.007) and numerically reduced on tubing versus CTRL. Following blood exposure, LINO tubing continued to produce a measurable NO-flux (0.20 ± 0.06 × 10-10 mol cm-2 min-1 ). LINO is a potential solution to reduce circuit-related bleeding and clotting during extracorporeal organ support, pending future extended testing in vivo using full-scale extracorporeal lung support devices.

Results of the Interlaboratory Computational Fluid Dynamics Study of the FDA Benchmark Blood Pump.

Computational fluid dynamics (CFD) is widely used to simulate blood-contacting medical devices. To be relied upon to inform high-risk decision making, however, model credibility should be demonstrated through validation. To provide robust data sets for validation, researchers at the FDA and collaborators developed two benchmark medical device flow models: a nozzle and a centrifugal blood pump. Experimental measurements of the flow fields and hemolysis were acquired using each model. Concurrently, separate open interlaboratory CFD studies were performed in which participants from around the world, who were blinded to the measurements, submitted CFD predictions of each benchmark model. In this study, we report the results of the interlaboratory CFD study of the FDA benchmark blood pump. We analyze the results of 24 CFD submissions using a wide range of different flow solvers, methods, and modeling parameters. To assess the accuracy of the CFD predictions, we compare the results with experimental measurements of three quantities of interest (pressure head, velocity field, and hemolysis) at different pump operating conditions. We also investigate the influence of different CFD methods and modeling choices used by the participants. Our analyses reveal that, while a number of CFD submissions accurately predicted the pump performance for individual cases, no single participant was able to accurately predict all quantities of interest across all conditions. Several participants accurately predicted the pressure head at all conditions and the velocity field in all but one or two cases. Only one of the eight participants who submitted hemolysis results accurately predicted absolute plasma free hemoglobin levels at a majority of the conditions, though most participants were successful at predicting relative hemolysis levels between conditions. Overall, this study highlights the need to validate CFD modeling of rotary blood pumps across the entire range of operating conditions and for all quantities of interest, as some operating conditions and regions (e.g., the pump diffuser) are more challenging to accurately predict than others. All quantities of interest should be validated because, as shown here, it is possible to accurately predict hemolysis despite having relatively inaccurate predictions of the flow field.

Sodium alginate-hydrogel coatings on extracorporeal membrane oxygenation for anticoagulation.

Thromboembolism caused by the use of extracorporeal membrane oxygenation (ECMO) remains common among patients with existing heart diseases and contributes to significant morbidity and mortality during the COVID-19 pandemic. Various surface modification strategies have been proposed, showing that the methacrylated alginate (MA-SA) hydrogel layer is transparent, which aids the observation of the thromboembolism from the inner wall of the tubing. In the combined dynamic and static blood of ECMO tubing inner surface in vitro experiments, it was also demonstrated that the adhesion of blood clots to the surface of vessels was remarkably reduced, and the MA-SA-based hydrogel coating could significantly prolong the activated partial thrombin time and block the endogenous coagulation. The favorable properties of natural polysaccharides of hydrogel coatings make them the best surface material choices to be applied for blood-contacting medical devices and significantly improve anticoagulant performance.

Extracting Mural and Volumetric Growth Patterns of Platelet Aggregates on Engineered Surfaces by Use of an Entity Tracking Algorithm.

Thrombosis is a major complication that can occur in both blood-contacting devices and regions and in regions of vascular damage. Microfluidic devices are popular templates to model various thrombogenic settings and to assess conditions that lead to bulk channel occlusion. However, area-averaged measurements miss the opportunity to extract real-time information on thrombus evolution and early dynamics of thrombus formation and propagation, which result in late-stage bulk channel occlusion. To clarify these dynamics, we have developed a standalone tracking algorithm that uses consecutive image connectivity and minimal centroid distance mappings to uniquely index all appearing thrombi in fluorescence time-lapse videos http://links.lww.com/ASAIO/A887 , and http://links.lww.com/ASAIO/A888 . This leads to measurements of all individual aggregates that can in turn be studied as ensembles. We applied tracking to fluorescence time-lapse videos http://links.lww.com/ASAIO/A887 , and http://links.lww.com/ASAIO/A888 of thrombosis across both collagen-functionalized substrate and across the surface of a roughened titanium alloy (Ti6Al4V) at a shear rate of 4000 s -1 . When comparing ensemble-averaged measurements to area-averaged metrics, we unveil immediate, steady thrombus growth at early phases on collagen surfaces and unstable thrombus attachment to roughened Ti6Al4V surfaces on Ti6Al4V surfaces. Additionally, we introduce tracked thrombus eccentricity and fluorescence intensity as additional volumetric measures of thrombus growth that relate back to the primary thrombosis mechanism at play. This work advocates for the complementation of surface macrostate metrics with characteristic thrombus microstate growth patterns to accurately predict critical thrombosis events.

Antimicrobial-free graphene nanocoating decreases fungal yeast-to-hyphal switching and maturation of cross-kingdom biofilms containing clinical and antibiotic-resistant bacteria

Candida albicans and methicillin-resistant Staphylococcus aureus (MRSA) synergize in cross-kingdom biofilms to increase the risk of mortality and morbidity due to high resistance to immune and antimicrobial defenses. Biomedical devices and implants made with titanium are vulnerable to infections that may demand their surgical removal from the infected sites. Graphene nanocoating (GN) has promising anti-adhesive properties against C. albicans. Thus, we hypothesized that GN could prevent fungal yeast-to-hyphal switching and the development of cross-kingdom biofilms. Herein, titanium (Control) was coated with high-quality GN (coverage > 99%). Thereafter, mixed-species biofilms (C. albicans combined with S. aureus or MRSA) were allowed to develop on GN and Control. There were significant reductions in the number of viable cells, metabolic activity, and biofilm biomass on GN compared with the Control (CFU counting, XTT reduction, and crystal violet assays). Also, biofilms on GN were sparse and fragmented, whereas the Control presented several bacterial cells co-aggregating with intertwined hyphal elements (confocal and scanning electronic microscopy). Finally, GN did not induce hemolysis, an essential characteristic for blood-contacting biomaterials and devices. Thus, GN significantly inhibited the formation and maturation of deadly cross-kingdom biofilms, which can be advantageous to avoid infection and surgical removal of infected devices.

Proactive Hemocompatibility Platform Initiated by PAMAM Dendrimer Adapting to Key Components in Coagulation System.

Surface modification manipulates the application performance of materials, and thrombosis caused by material contact is a key risk factor of biomaterials failure in blood-contacting/implanting devices. Therefore, building a safe and effective hemocompatibility platform is still urgent. Owing to the unique properties of polyamidoamine (PAMAM) dendrimers, in this study, modified surfaces with varying dendrimer densities were interacted with elements maintaining blood homeostasis. These included the plasma proteins bovine serum albumin and fibrinogen, cells in blood (platelets and erythrocyte), as well as endothelial cells (ECs), and the objective was to evaluate the blood compatibility of the chosen materials. Whole blood test and dynamic blood circulation experiment by the arteriovenous shunt mode of rabbit were also conducted, based on the complexity and fluidity of blood. The PAMAM-modified substrates, particularly that with a high density of PAMAM (N1.0), adsorbed proteins with lessened fibrinogen adsorption, reduced platelet activation and aggregation, and suppressed clotting in whole blood and dynamic blood testing. Furthermore, the designed PAMAM dendrimer densities were safe and showed negligible erythrocyte lysis. Concurrently, PAMAM modification could maintain EC growth and did not trigger the release of procoagulant factors. These results suggest that the PAMAM-modified materials are compatible for maintaining blood homeostasis. Thus, PAMAM dendrimers can work as excellent surface modifiers for constructing a hemocompatibility platform and even a primer layer for desired functional design, promoting the service performance of blood-contacting devices.

Hemocompatibility Multi-in-One Hydrogel Coating with ROS-Triggered Inflammation Suppression and Anti-Infection Properties for Blood-Contacting Device.

In traditional blood-contacting medical devices, infection and thrombosis are easily formed on the surface of the materials. In addition, inflammation is also a clinical complication that cannot be ignored. More importantly, there is a mutually promoting relationship between the inflammatory response and the infection as well as thrombosis. In this work, we propose a self-adaptive anti-inflammatory coating strategy combined with anti-infection and anticoagulant capacity, which was accomplished based on nano-Ag particles and dexamethasone (Dex)-loaded hydrogel coating. The coating loaded with nano-Ag endows it with good bactericidal performance, including Gram-positive and Gram-negative bacteria. As an anti-inflammatory drug, Dex was grafted onto hydrogel coating by a reactive oxygen species (ROS)-cleavable thioketal (TK) bond and released upon the trigger of an inflammatory environment, blocking further inflammatory cascade, providing self-adaptive anti-inflammatory properties, and avoiding side effects of the drug. It was demonstrated that the coating worked as a precise strategy to resist coagulation, infection, and inflammation, provided a new perspective for designing clinical complication-conformable coatings, and had great application prospects on blood-contacting medical devices.

Microgel reinforced zwitterionic hydrogel coating for blood-contacting biomedical devices

Zwitterionic hydrogels exhibit eminent nonfouling and hemocompatibility. Several key challenges hinder their application as coating materials for blood-contacting biomedical devices, including weak mechanical strength and low adhesion to the substrate. Here, we report a poly(carboxybetaine) microgel reinforced poly(sulfobetaine) (pCBM/pSB) pure zwitterionic hydrogel with excellent mechanical robustness and anti-swelling properties. The pCBM/pSB hydrogel coating was bonded to the PVC substrate via the entanglement network between the pSB and PVC chain. Moreover, the pCBM/pSB hydrogel coating can maintain favorable stability even after 21 d PBS shearing, 0.5 h strong water flushing, 1000 underwater bends, and 100 sandpaper abrasions. Notably, the pCBM/pSB hydrogel coated PVC tubing can not only mitigate the foreign body response but also prevent thrombus formation ex vivo in rats and rabbits blood circulation without anticoagulants. This work provides new insights to guide the design of pure zwitterionic hydrogel coatings for biomedical devices.

Anti-Fouling Surfaces for Extracorporeal Membrane Oxygenation by Surface Grafting of Hydrophilic Sulfoxide Polymers.

Non-thrombogenic surfaces for extracorporeal membrane oxygenation (ECMO) devices are important to increase their duration of usage and to enable long-term life support. However, the contact of blood with the hydrophobic synthetic ECMO membrane materials such as poly(4-methyl-1-pentene) (PMP) can activate the coagulation cascade, causing thrombosis and a series of consequent complications during ECMO operation. Targeting this problem, we proposed to graft highly hydrophilic sulfoxide polymer brushes onto the PMP surfaces via gamma ray irradiation-initiated polymerization to improve the hemocompatibility of the membrane. Through this chemical modification, the surface of the PMP film is altered from hydrophobic to hydrophilic. The extent of plasma protein adsorption and platelet adhesion, the prerequisite mediators of the coagulation cascade and thrombus formation, are drastically reduced compared with those of the unmodified PMP film. Therefore, the method provides a facile approach to modify PMP materials with excellent antifouling properties and improved hemocompatibility demanded by the applications in ECMO and other blood-contacting medical devices.

Covalent Immobilization of REDV Peptide on Heparin Coating Promotes Selective Adhesion of Endothelial Cells

Forming an endothelial cell (EC) monolayer on the surface of blood-contacting devices is an ideal way to improve their blood compatibility, this process is known as endothelialization. Heparin is a proteoglycan with a strong negative charge, which is a commonly used antithrombotic agent. Heparin coatings also has been successfully used to improve the hemocompatibility of various biomaterials. In this study, a short peptide Arg-Glu-Asp-Val (REDV) with specific affinity for endothelial cells was covalently conjugated with maleimide-functionalized heparin. The conjugate retains the negative charge of heparin and can be directly immobilized on the surface of positively charged poly-L-lysine. This specific reaction to the carboxyl group of heparin could potentially reduce the shedding and steric hindrance effects of REDV peptide and enhancing the affinity and selectivity of heparin for EC.

Bioinspired zwitterionic microgel-based coating: Controllable microstructure, high stability, and anticoagulant properties

Zwitterionic polymers have shown promising results in non-fouling and preventing thrombosis. However, the lack of controlled surface coverage hinders their application for biomedical devices. Inspired by the natural biological surfaces, a facile zwitterionic microgel-based coating strategy is developed by the co-deposition of poly (sulfobetaine methacrylate-co-2-aminoethyl methacrylate) microgel (SAM), polydopamine (PDA), and sulfobetaine-modified polyethyleneimine (PES). The SAMs were used to construct controllable morphology by using the PDA combined with PES (PDAS) as the intermediate layer, which can be easily modulated via adjusting the crosslinking degree and contents of SAMs. The obtained SAM/PDAS coatings exhibit high anti-protein adhesive properties and can effectively inhibit the adhesion of cells, bacteria, and platelet through the synergy of high deposition density and controllable morphology. In addition, the stability of SAM/PDAS coating is improved owing to the anchoring effects of PDAS to substrate and SAMs. Importantly, the ex vivo blood circulation test in rabbits suggests that the SAM/PDAS coating can effectively decrease thrombosis without anticoagulants. This study provides a versatile coating method to address the integration of zwitterionic microgel-based coatings with high deposition density and controllable morphology onto various substrates for wide biomedical device applications. Statement of significanceThrombosis is a major cause of medical device implantation failure, which results in significant morbidity and mortality. In this study, inspired by natural biological surfaces (fish skin and vascular endothelial layer) and the anchoring ability of mussels, we report a convenient and efficient method to firmly anchor zwitterionic microgels using an oxidative co-deposition strategy. The prepared coating has excellent antifouling and antithrombotic properties through the synergistic effect of physical morphology and chemical composition. This biomimetic surface engineering strategy is expected to provide new insights into the clinical problems of blood-contacting devices related to thrombosis.

Toward modeling thrombosis and thromboembolism in laminar and turbulent flow regimes.

Thrombosis and thromboembolism are deadly risk factors in blood-contacting biomedical devices, and in-silico models of thrombosis are attractive tools to understand the mechanics of these processes, though the simulation of thromboembolism remains underdeveloped. The purpose of this study is to modify an existing computational thrombosis model to allow for thromboembolism and to investigate the behavior of the modified model at a range of flow rates. The new and existing models are observed to lead to similar predictions of thrombosis in a canonical backward-facing step geometry across flow rates, and neither model predicts thrombosis in a turbulent flow. Simulations are performed by increasing flow rates in the case of a clot formed at lower flow to induce embolization. While embolization is observed, most of the clot breakdown is by shear rather than by breakup and subsequent transport of clotted material, and further work is required in the formulation and validation of embolization. This model provides a framework to further investigate thromboembolization.

A universal anti-thrombotic and antibacterial coating: A chemical approach directed by Fenton reaction and silane coupling

Blood-contacting devices, including vascular stents, catheters and extracorporeal membrane oxygenation (ECMO), often lead to complications such as thrombosis, inflammation and infections, resulting in implantation failure and adverse events in clinical applications. In this study, a facile and universal antifouling coating with superhydrophobic properties was proposed to improve the contacting interface for combating thrombosis and bacterial infections. The fabrication of the coating was based on Fenton reaction and silane coupling. Oxidative groups were introduced after Fenton activation and topological structure was constructed on the surface by silane coupling agents, and fluoride was used for modification. The obtained superhydrophobic coatings appeared as compact and uniform nanofibers that possessed good resistance to protein adsorption and platelet adhesion, while the thrombus formation was inhibited. In addition, the adhesion of Staphylococcus aureus and Escherichia coli was effectively prevented, which potentially delayed the formation of biofilm and reduced the risk of infections. The coating was applicable to a variety of substrates (polymer, non-metallic inorganic and metallic) and the superhydrophobic properties were preserved after immersion in PBS for 28 days, indicating that it was a promising antithrombotic and antibacterial candidate for modification of medical devices.

Dressing blood-contacting devices with platelet membrane enables large-scale multifunctional biointerfacing

•Platelet membrane were first used for coating macroscale blood-contacting devices •Platelet-membrane coating (PMC) endows material-improved biocompatibility •Biofunctional proteins confer favorable performance on PMC-modified vascular stents So far, cloaking materials with platelet membranes have been widely studied, mainly focused on covering nanosized materials but rarely forwarded to dressing large-scale materials. Herein, a platelet-membrane coating (PMC) constructed on the surface of a macroscopic device is reported, driven by the spontaneous fusion of platelet-membrane vesicles (PMVs) with a negatively charged superhydrophilic surface. The coating contains not only phospholipids but also a variety of functional proteins of the platelet membrane, which is a further leap compared with surface-modification strategies of imitating cell-membrane structure with inert synthetic amphiphilic molecules. The preservation of membrane proteins by dressing PMC endows the surface of macroscopic devices with bioactivity. The implantation of vascular stents covered with PMC demonstrates the potential to address the desired biointerface properties, such as thromboprotection and anti-inflammation, and promote re-endothelialization. Overall, dressing large-scale blood-contacting materials with PMC provides a multifunctional biointerface by naturally preserved membrane proteins. So far, cloaking materials with platelet membranes have been widely studied, mainly focused on covering nanosized materials but rarely forwarded to dressing large-scale materials. Herein, a platelet-membrane coating (PMC) constructed on the surface of a macroscopic device is reported, driven by the spontaneous fusion of platelet-membrane vesicles (PMVs) with a negatively charged superhydrophilic surface. The coating contains not only phospholipids but also a variety of functional proteins of the platelet membrane, which is a further leap compared with surface-modification strategies of imitating cell-membrane structure with inert synthetic amphiphilic molecules. The preservation of membrane proteins by dressing PMC endows the surface of macroscopic devices with bioactivity. The implantation of vascular stents covered with PMC demonstrates the potential to address the desired biointerface properties, such as thromboprotection and anti-inflammation, and promote re-endothelialization. Overall, dressing large-scale blood-contacting materials with PMC provides a multifunctional biointerface by naturally preserved membrane proteins.

BIO4: A Dual-Action Nitric Oxide-Releasing Slippery Surface Coating for Extracorporeal Organ Support: First Evaluation at Clinically Relevant Blood Flow Rate for Partial Lung Support

Background: Numerous biomaterials are developed to mitigate untoward effects of blood exposure to foreign surfaces on blood-contacting medical devices, such as extracorporeal life support (ECLS); however, limited testing is performed using clinical blood flow conditions and device components. A liquid infused nitric oxide-releasing (LiNORel) material was developed to prevent surface protein adsorption while eluting nitric oxide (NO) to minimize platelet activation and aggregation. The study objective was to assess LiNORel applied to full-scale ECLS circuit tubing during 6 h ex vivo circulation of porcine blood at a clinically relevant flow rate. We hypothesized that LiNORel reduces thrombus deposition and platelet sequestration versus unmodified tubing. Methods: Heparinized blood (0.75 U/mL) was collected from mechanically ventilated swine (n=9, 45-55kg) with ARDS following polytrauma in an unrelated multi-day ICU study. Blood was divided into circuits with the following (500 mL/circuit): CTRL – unmodified tubing; LI – tubing with liquid infused surface modification; NO – tubing with NOrelease modification; LiNORel – tubing with liquid infused and NO-release modifications. Circuits included a blood reservoir, centrifugal pump, and 2 tubing segments (1 m, 3/8” ID). Circulation was performed for 6 h at 1.5 L/min flow rate. Heparin was sparingly administered to maintain activated clotting times (ACT) of 125-160s. Data included: heparin administered, blood gas, methemoglobin (MetHb) as an indicator of NO toxicity, pump revolutions per minute. At baseline, 3- and 6 h, a blood panel was performed to assess platelet count/activation, thromboelastography, PT, aPTT, fibrinogen, D-dimer, von Willebrand factor (vWF) activity and plasma free hemoglobin. Post-circulation thrombus deposition was analyzed. Data were analyzed for within-group time-dependent changes and between group differences. All tests were two-sided (p<0.05 for significance). Results: Circuits remained patent in all groups with ACT in range. Numerically (n.s.), CTRL received more heparin (100±49 U) to maintain ACT (NO=50±32 U, LI=33±27, LiNORel=47±33 U). There was no group difference in blood gases and MetHb. Numerically, reduction in platelet count at 6 h was greatest in CTRL and least in LiNORel (n.s., Fig 1A). Activated platelets were elevated at 6 h in CTRL vs NO (p=0.013) and LiNORel (p=0.020) (Fig 1B). Numerically, procoagulant platelets were elevated in CTRL (Fig 1C). No group differences in thromboelastography, PT, aPTT and fibrinogen were observed. D-dimer was elevated at 6 h in CTRL (p=0.007) and LI (p=0.027) groups. vWF was elevated at 6 h in CTRL (p=0.001). Clot deposition was minimal and not different between groups. Conclusions: LiNORel reduced platelet activation in this model which utilized a clinically relevant blood flow rate and full-scale circulation tubing for partial lung support. Additional testing in vivo for multi-day duration is ongoing in our laboratory. Figure 1. Platelet count (A), concentration of activated platelets indicated by expression of P-selectin (B) and concentration of procoagulant platelets indicated by phosphatidyl serine expression (C) during 6-hours ex vivo circulation. Circuit tubing consisted of Control (CTRL) – uncoated standard tubing; Nitric Oxide (NO) – tubing with embedded nitric oxide donor; Liquid Infused (LI) – tubing swelled with non-adhesive lubricant layer; Liquid-infused Nitric Oxide Release (LiNORel) – tubing with embedded nitric oxide donor and non-adhesive lubricant layer combination coating. †Indicates significant difference between LiNORel and CTRL. ‡Indicates significant difference between NO and CTRL. *Indicates significant difference within NO group from baseline (BL). **Indicates significant difference within CTRL group from BL. ***Indicates significant difference within LiNORel group from BL. ****Indicates significant difference within LI group from BL. All tests two-sided with p<0.05 for significance.

Stable and direct coating of fibronectin-derived Leu-Asp-Val peptide on ePTFE using one-pot tyrosine oxidation for endothelial cell adhesion

Expanded polytetrafluoroethylene (ePTFE) is widely used in clinical applications, such as in the manufacture of blood-contacting implantable devices, owing to its flexibility, biostability, and non-adhesiveness. Modification with peptides is an effective strategy to further improve the ePTFE function. However, the chemical stability of PTFE makes it difficult to modify with peptides. In this study, we reported a simple method for the dense and stable coating of biofunctional peptides on the ePTFE surface through the anchor sequence, Tyr-Lys-Tyr-Lys-Tyr-Lys (YK3). A peptide (YK3-LDV) incorporating the YK3 anchor and a ligand sequence for α4β1 integrin, Leu-Asp-Val (LDV), was successfully coated on ePTFE grafts through one-pot oxidation. The peptide layer constructed via YK3-LDV coating on ePTFE was stable and resistant to extensive washing by aqueous solutions of highly concentrated salts and surfactants. YK3-LDV coating promoted the in vitro adhesion of endothelial cells to ePTFE. Furthermore, YK3-LDV coating accelerated the in vivo formation of neointima-like tissue in a rat model with an ePTFE patch implanted into the carotid artery.

In vitro hemocompatibility screening of a slippery liquid impregnated surface coating for extracorporeal organ support applications.

Clot formation, infection, and biofouling are unfortunate but frequent complications associated with the use of blood-contacting medical devices. The challenge of blood-foreign surface interactions is exacerbated during medical device applications involving substantial blood contact area and extended duration of use, such as extracorporeal life support (ECLS). We investigated a novel surface modification, a liquid-impregnated surface (LIS), designed to minimize protein adsorption and thrombus development on medical plastics. The hemocompatibility and efficacy of LIS was investigated first in a low-shear model with LIS applied to the lumen of blood incubation vials and exposed to human whole blood. Additionally, LIS was evaluated in a 6 h ex vivo circulation model with swine blood using full-scale ECLS circuit tubing and centrifugal pumps with clinically relevant flow rate (1.5 L/min) and shear conditions for extracorporeal carbon dioxide removal. Under low-shear, LIS preserved fibrinogen concentration in blood relative to control polymers (+40 ± 6 mg/dL vs polyvinyl chloride, p < .0001), suggesting protein adsorption was minimized. A fibrinogen adhesion assay demonstrated a dramatic reduction in protein adsorption under low shear (87% decrease vs polyvinyl chloride, p = .01). Thrombus deposition and platelet adhesion visualized by scanning electron microscopy were drastically reduced. During the 6 h ex vivo circulation, platelets in blood exposed to LIS tubing did not become significantly activated or procoagulant, as occurred with control tubing; and again, thrombus deposition was visually reduced. A LIS coating demonstrated potential to reduce thrombus formation on medical devices. Further testing is needed specialized to clinical setting and duration of use for specific medical target applications.

Attachment of endothelial colony-forming cells onto a surface bearing immobilized anti-CD34 antibodies: Specific CD34 binding versus nonspecific binding.

Cardiovascular disease is a leading cause of death worldwide; however, despite substantial advances in medical device surface modifications, no synthetic coatings have so far matched the native endothelium as the optimal hemocompatible surface for blood-contacting implants. A promising strategy for rapid restoration of the endothelium on blood-contacting biomedical devices entails attracting circulating endothelial cells or their progenitors, via immobilized cell-capture molecules; for example, anti-CD34 antibody to attract CD34+ endothelial colony-forming cells (ECFCs). Inherent is the assumption that the cells attracted to the biomaterial surface are bound exclusively via a specific CD34 binding. However, serum proteins might adsorb in-between or on the top of antibody molecules and attract ECFCs via other binding mechanisms. Here, we studied whether a surface with immobilized anti-CD34 antibodies attracts ECFCs via a specific CD34 binding or a nonspecific (non-CD34) binding. To minimize serum protein adsorption, a fouling-resistant layer of hyperbranched polyglycerol (HPG) was used as a "blank slate," onto which anti-CD34 antibodies were immobilized via aldehyde-amine coupling reaction after oxidation of terminal diols to aldehydes. An isotype antibody, mIgG1, was surface-immobilized analogously and was used as the control for antigen-binding specificity. Cell binding was also measured on the HPG hydrogel layer before and after oxidation. The surface analysis methods, x-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry, were used to verify the intended surface chemistries and revealed that the surface coverage of antibodies was sparse, yet the anti-CD34 antibody grafted surface-bound ECFCs very effectively. Moreover, it still captured the ECFCs after BSA passivation. However, cells also attached to oxidized HPG and immobilized mIgG1, though in much lower amounts. While our results confirm the effectiveness of attracting ECFCs via surface-bound anti-CD34 antibodies, our observation of a nonspecific binding component highlights the importance of considering its consequences in future studies.

DHNTs assimilated TPU/PEG membrane a new combination for evaluation of in-vitro blood-coagulation

Thermoplastic polyurethane is known for its elasticity and hydrophobicity, which is significant for a few biomedical applications. The risk of clotting formation in blood-contacting devices is a major concern. Altering the surface of polymer with the addition of suitable nanofillers and additives can improve the blood compatibility of the prepared materials. Thus, aiming for enhanced blood compatibility of TPU (1) addition of PEG as an effective pore creator leads to enhancement in hydrophilicity, (2) modification of halloysite by universal bio-adhesives such as polydopamine, attach to the wall of HNTs by oxidation and self-polymerization, resulting as superior biomedical nanocomposites. The membrane is fabricated via the phase-inversion technique. TPU, TPU/PEG, and DHNTs@TPU/PEG were compared based on major characteristics such as hydrophilicity, pore analysis by SEM (ImageJ), and the blood compatibility test. In-Vitro blood coagulation and degradation study of pure TPU, TPU/PEG and DHNTs@TPU/PEG membrane suggest that the modified DHNTs-TPU/PEG membrane has better blood coagulation time and decreased hemolysis ratio. A degradation study with a variation in pH shows the breakage of a polymeric chain of the membrane. These results can suggest that the modified membrane has a potential application in the biomedical.