Bio-inspired Optimization Algorithm Research Articles

Improving generalisation capability of artificial intelligence-based solar radiation estimator models using a bio-inspired optimisation algorithm and multi-model approach.

One way of reducing environmental pollution is to reduce our dependence on fossil fuels by replacing them with solar radiation (Rs), which is one of the main sources of clean and renewable energy. In this study, daily Rs values at seven meteorological stations in Iran (Ahvaz, Isfahan, Kermanshah, Mashhad, Bandar Abbas, Kerman and Tabriz) over 2010-2019 were estimated using empirical models, support vector machine (SVM), SVM coupled with cuckoo search algorithm (SVM-CSA) and multi-model approach in the form of two structures. In structure 1, data from each station were divided into training and testing sets. In structure 2, data from the former four stations were used for model training, and those from the latter three stations were used to test the models. The results showed that using meteorological parameters improved estimation accuracy compared with the use of geographical parameters for both SVM and SVM-CSA models. Coupling the CSA to SVM did improve the accuracy of radiation estimates, reducing RMSE by up to 38% (Kermanshah station) and 36% (Tabriz station) for the first structure and about 42.4% (Tabriz station) for the second. Performance analysis of the models over three intervals including, the first, middle and last third of measured radiation values at each station showed that for both structures (except at Tabriz station), the best model performance in under- and over-estimation sets of radiation values was obtained, respectively, in the first third interval (first structure, Mashhad station, RMSE = 28.39J.cm-2.day-1) and the last third interval (first structure, Bandar Abbas station, RMSE = 12.23J.cm-2.day-1). Determining the effects of climate change on Rs estimation and using remotely sensed data as inputs of the models could be considered as future works.

Identification of material properties of green laminate composite plates using bio-inspired optimization algorithms

This work proposes a non-destructive method for the identification of material properties of composite materials. The proposed optimization problems have for design variables the material elastic constants and make use of nature-inspired metaheuristic optimization algorithms. The objective functions relate experimental natural frequencies with computationally obtained ones. The nature-inspired metaheuristic optimization algorithms used are the: (1) Genetic algorithm, (2) Particle Swarm Optimization algorithm, (3) Grey Wolf Optimization algorithm, (4) Firefly algorithm, and (5) Cuckoo Search algorithm. The study is focused on laminated composite materials, whether they are synthetic fiber reinforced, such as glass fibers reinforced composites, or natural fibers reinforced like wooden fibers reinforced composites and plywood. The proposed method allows the identification of the elastic constants within an acceptable range compared to other methods, provided that enough natural frequencies are accurately measured. This method presents several advantages in comparison to other methods: (1) it does not require an initial guess of the elastic constants, (2) it does not need the gradient of the objective functions, and (3) it allows the identification of a large range of elastic constants of different materials due to its good adaptability and versatility.

An improved approach to resolve a combinatorial optimization problem based CoronaVirus Optimization Algorithm

Combinatorial optimization problems refer to intractable problems that can’t be performed using exact methods. The resolution of combinatorial problems geared towards the application of heuristics, metaheuristics also matheuristics, in order to provide good enough approximations. As exact methods provide resolution corresponding to small problem scale, the approximation methods target large scale of complex problems. Metaheuristics are used to deploy intelligent methods to solve complex problems in a reasonable amount of time. The performance of a metaheuristic is improved by means of parameters adjustment as well as, hybridization within heuristics, iterative improvement methods or various metaheuristics. The cooperation of several optimization algorithms leads to improve resolution, also to overcome the limitations reported in resolving NP-hard problems. The resolution of complex problems, is thus constrained by stagnation on local optimums, as the optimization process is possibly stagnant on a specific search space region. In fact, traveling salesman problem is a combinatorial problem, that arises problematics related to the efficiency of its resolution methods. The aim of this work is to investigate on the improvement of a new bio-inspired method so-called coronavirus optimization algorithm in order to provide improved resolutions to traveling salesman problem. Various intelligent approaches are investigated and hybridized within coronavirus optimization algorithm, namely random replicate operator, elitist selective replicate operator, iterated local search, stochastic hill-climbing also improved self-organizing map. The numerical results are obtained using symmetric TSPLIB benchmarks.

Zebra Optimization Algorithm: A New Bio-Inspired Optimization Algorithm for Solving Optimization Algorithm

In this paper, a new bio-inspired metaheuristic algorithm called Zebra Optimization Algorithm (ZOA) is developed; its fundamental inspiration is the behavior of zebras in nature. ZOA simulates the foraging behavior of zebras and their defense strategy against predators’ attacks. The ZOA steps are described and then mathematically modeled. ZOA performance in optimization is evaluated on sixty-eight benchmark functions, including unimodal, high-dimensional multimodal, fixed-dimensional multimodal, CEC2015, and CEC2017. The results obtained from ZOA are compared with the performance of nine well-known algorithms. The simulation results show that ZOA can solve optimization problems by creating a suitable balance between exploration and exploitation and has a superior performance compared to nine competitor algorithms. ZOA’s ability to solve real-world problems has been tested on four engineering design problems, namely, tension/compression spring, welded beam, speed reducer, and pressure vessel. The optimization results show that ZOA is an effective optimizer in determining the values of the design variables of these problems compared to the nine competitor algorithms.

COMPARATIVE ANALYSIS OF BIO-INSPIRED OPTIMIZATION ALGORITHMS IN NEURAL NETWORK BASED DATA MINING CLASSIFICATION

It always helps to determine optimal solutions for stochastic problems thereby maintaining good balance between its key elements. Nature inspired algorithms are meta-heuristics that mimic the natural activities for solving optimization issues in the era of computation. In the past decades, several research works have been presented for optimization especially in the field of data mining. This paper addresses the implementation of bio-inspired optimization techniques for machine learning based data mining classification by four different optimization algorithms. The stochastic problems are overcome by training the neural network model with techniques such as barnacles mating , black widow optimization, cuckoo algorithm and elephant herd optimization. The experiments are performed on five different datasets, and the outcomes are compared with existing methods with respect to runtime, mean square error and classification rate. From the experimental analysis, the proposed bio-inspired optimization algorithms are found to be effective for classification with neural network training.

Tasmanian Devil Optimization: A New Bio-Inspired Optimization Algorithm for Solving Optimization Algorithm

In this paper, a new bio-inspired metaheuristic algorithm called Tasmanian Devil Optimization (TDO) is designed that mimics Tasmanian devil behavior in nature. The fundamental inspiration used in TDO is simulation of the feeding behavior of the Tasmanian devil, who has two strategies: attacking live prey or feeding on carrions of dead animals. The proposed TDO is described, then its mathematical modeling is presented. TDO performance in optimization is tested on a set of twenty-three standard objective functions. Unimodal benchmark functions have analyzed the TDO exploitation capability, while high-dimensional multimodal and fixed-exploitation multimodal benchmark functions have challenged the TDO exploration capability. The optimization results indicate the high ability of the proposed TDO in exploration and exploitation and create a proper balance between these two indicators to effectively solve optimization problems. Eight well-known metaheuristic algorithms are employed to analyze the quality of the obtained results from TDO. The simulation results show that the proposed TDO, with its strong performance, has a higher capability than the eight competitor algorithms and is much more competitive. For further analysis, TDO is tested in optimizing four engineering design problems. Implementation results show that TDO has an effective performance in solving real-world applications.

A prescription of methodological guidelines for comparing bio-inspired optimization algorithms

Bio-inspired optimization (including Evolutionary Computation and Swarm Intelligence) is a growing research topic with many competitive bio-inspired algorithms being proposed every year. In such an active area, preparing a successful proposal of a new bio-inspired algorithm is not an easy task. Given the maturity of this research field, proposing a new optimization technique with innovative elements is no longer enough. Apart from the novelty, results reported by the authors should be proven to achieve a significant advance over previous outcomes from the state of the art. Unfortunately, not all new proposals deal with this requirement properly. Some of them fail to select appropriate benchmarks or reference algorithms to compare with. In other cases, the validation process carried out is not defined in a principled way (or is even not done at all). Consequently, the significance of the results presented in such studies cannot be guaranteed. In this work we review several recommendations in the literature and propose methodological guidelines to prepare a successful proposal, taking all these issues into account. We expect these guidelines to be useful not only for authors, but also for reviewers and editors along their assessment of new contributions to the field.

Comparative Analysis of Bio-Inspired Optimization Algorithms in Neural Network-Based Data Mining Classification

It always helps to determine optimal solutions for stochastic problems thereby maintaining good balance between its key elements. Nature inspired algorithms are meta-heuristics that mimic the natural activities for solving optimization issues in the era of computation. In the past decades, several research works have been presented for optimization especially in the field of data mining. This paper addresses the implementation of bio-inspired optimization techniques for machine learning based data mining classification by four different optimization algorithms. The stochastic problems are overcome by training the neural network model with techniques such as barnacles mating , black widow optimization, cuckoo algorithm and elephant herd optimization. The experiments are performed on five different datasets, and the outcomes are compared with existing methods with respect to runtime, mean square error and classification rate. From the experimental analysis, the proposed bio-inspired optimization algorithms are found to be effective for classification with neural network training.

Small signal stability enhancement of a large scale power system using a bio-inspired whale optimization algorithm

A whale optimization algorithm (WOA)-based power system stabilizer (PSS) design methodology on modified single machine infinite bus (MSMIB) and multi-machine systems to enhance the small-signal stability (SSS) of the power system is presented. The PSS design methodology is implemented using an eigenvalue (EV)-based objective function. The performance of the WOA is tested with several CEC14 and CEC17 test functions to investigate its potential in optimizing the complex mathematical equations. The New England 10-generator 39-bus system and the MSMIB system operating at various loading conditions are considered as the test systems to examine the proposed method. Extensive simulation results are obtained which validate the effectiveness of the proposed WOA method when compared with other algorithms.

Event-triggered control optimal tuning through bio-inspired optimization in robotic manipulators

This paper proposes the tuning approach of the event-triggered controller (ETCTA) for the robotic system stabilization task where the reduction of the stabilization error and the data broadcasting of the control update are simultaneously considered. This approach is stated as a dynamic optimization problem, and the best controller parameters are obtained by using fourteen different bio-inspired optimization algorithms. The statistics results reveal that, among the tested bio-inspired optimization algorithms, the most reliable algorithm in the proposed tuning problem is the differential evolution variant DE/Best/1/Exp. The obtained result is validated both in numerical simulation as well as using a laboratory prototype. The simulation results indicate that the obtained control parameters can also deal with disturbances and reference changes not considered in the ETCTA’s optimization problem formulation without significantly worsening the control design objective. Experimental results disclose that the proposed event-triggered control tuning approach provides the best trade-off between the number of control signal updates and the position error among other tuning approaches, decreasing the data broadcasting of the control update by around 86.33% with a non-significant increase in the stabilization error of around 26.53%.

Artificial hummingbird algorithm: A new bio-inspired optimizer with its engineering applications

A new bio-inspired optimization algorithm called artificial hummingbird algorithm (AHA) is proposed in this work to solve optimization problems. The AHA algorithm simulates the special flight skills and intelligent foraging strategies of hummingbirds in nature. Three kinds of flight skills utilized in foraging strategies, including axial, diagonal, and omnidirectional flights, are modeled. In addition, guided foraging, territorial foraging, and migrating foraging are implemented, and a visit table is constructed to model the memory function of hummingbirds for food sources. AHA is validated using two sets of numerical test functions, and the results are compared with those obtained from various algorithms. The comparisons demonstrate that AHA is more competitive than other meta-heuristic algorithms and determine high-quality solutions with fewer control parameters. Additionally, the performance of AHA is validated on ten challenging engineering design cases studies. The results show the superior effectiveness of AHA in terms of computational burden and solution precision compared with the existing optimization techniques in literature. The study also explores the application of AHA in hydropower operation design to further demonstrate its potential in practice. The source code of AHA is publicly available at https://seyedalimirjalili.com/aha and https://www.mathworks.com/matlabcentral/fileexchange/101133-artificial-hummingbird-algorithm?s_tid=srchtitle.

Bio-Inspired Scheduling for Factory Automation in the TD-LTE System

ABSTRACT Wireless technology has advantages such as low cost, flexibility, relatively easy installation, and the ability to address routing issues. Consequently, wireless factory automation has received considerable attention recently. However, most wireless technologies in factory automation have adopted unlicensed bandwidth, which can be affected by interference from other users. Long-term evolution adopts a licensed bandwidth; therefore, it can be a solution for factory automation. This paper presents scheduling algorithms in wireless industrial networks for factory automation in wireless sensor networks using the TD-LTE system. To satisfy real-time requirements, scheduling algorithms based on bio-inspired optimization algorithms, such as genetic algorithm (GA), particle swarm optimization (PSO), and firefly algorithm (FA), and dynamic frame configuration (DFC) are proposed to cover more nodes. Furthermore, the performances of these algorithms with and without DFC are evaluated.

Smart surgical control under RCM constraint using bio-inspired network

In this paper, we propose a control framework for intelligent surgical robots under the Remote Center of Motion (RCM). The goal of a surgical robot is to assist surgeons in performing complex surgeries. RCM constraint implies that the surgical tip attached to the end-effector of the surgical robot does not slide away from the point of the incision while performing surgery. Implementation of a control algorithm to comply with RCM constraints is a complicated task because of the nonlinear model of the surgical robots and stringent conditions of accuracy imposed by the patient’s safety. This paper proposes an optimization-driven approach to perform the surgical maneuver under RCM constraints. We then applied a bio-inspired optimization algorithm to solve the problem efficiently. For testing the performance of ZNNBAS, we used MATLAB to simulate a surgical procedure. A 7-DOF surgical robot (KUKA LBR IIWA 7) was used as a test bench for running the simulations. The simulation results show that the ZNNBAS is comparable with BAS, PSO, and GA and efficiently and robustly performed the task commanded maneuvers while enforcing the RCM constraints.

A bioinspired neural architecture search based convolutional neural network for breast cancer detection using histopathology images

The design of neural architecture to address the challenge of detecting abnormalities in histopathology images can leverage the gains made in the field of neural architecture search (NAS). The NAS model consists of a search space, search strategy and evaluation strategy. The approach supports the automation of deep learning (DL) based networks such as convolutional neural networks (CNN). Automating the process of CNN architecture engineering using this approach allows for finding the best performing network for learning classification problems in specific domains and datasets. However, the engineering process of NAS is often limited by the potential solutions in search space and the search strategy. This problem often narrows the possibility of obtaining best performing networks for challenging tasks such as the classification of breast cancer in digital histopathological samples. This study proposes a NAS model with a novel search space initialization algorithm and a new search strategy. We designed a block-based stochastic categorical-to-binary (BSCB) algorithm for generating potential CNN solutions into the search space. Also, we applied and investigated the performance of a new bioinspired optimization algorithm, namely the Ebola optimization search algorithm (EOSA), for the search strategy. The evaluation strategy was achieved through computation of loss function, architectural latency and accuracy. The results obtained using images from the BACH and BreakHis databases showed that our approach obtained best performing architectures with the top-5 of the architectures yielding a significant detection rate. The top-1 CNN architecture demonstrated a state-of-the-art performance of base on classification accuracy. The NAS strategy applied in this study and the resulting candidate architecture provides researchers with the most appropriate or suitable network configuration for using digital histopathology.

Evaluation of bio-inspired optimization algorithms hybrid with artificial neural network for reference crop evapotranspiration estimation

Reference crop evapotranspiration (ETo) is a determinant factor in agricultural water resource management. Therefore, accurate ETo information is critical to quantify crop water requirements for precision agriculture management. This study coupled bio-inspired optimization algorithms with artificial neural network (ANN), i.e., ANN with bat algorithm (BA-ANN), ANN with cuckoo search algorithm (CSA-ANN), and ANN with whale optimization algorithm (WOA-ANN), and developed three hybrid ANN models for daily ETo modeling with limited inputs. The models were trained and evaluated using a k-fold test approach and long-term daily climatic data from 2001 to 2018 at six climatic stations in the Loess Plateau of north China. Three input scenarios were used, including temperature-based inputs, radiation-based inputs, and mass transfer-based inputs. The statistical comparison showed that the hybrid WOA-ANN offered better estimates than BA-ANN and CSA-ANN in all three input scenarios. In general, the radiation-based WOA-ANN provided the most accurate ETo estimations, with regional average relative root mean square error and Nash-Sutcliffe efficiency coefficient of 13.3% and 0.959, respectively. The temperature-based WOA-ANN offered acceptable and reasonable ETo estimates. Thus, it is a reliable tool for ETo modeling, given that air temperature is available in many regions. Overall, the bio-inspired optimization algorithms are robust tools for enhancing ANN performance in ETo simulation, and thus they are highly recommended to estimate ETo in the study region. Our study proposed powerful models for accurately estimating ETo with limited inputs, offering practical implications for the development of precision agriculture.

Optimisation of fuzzy logic quadrotor attitude controller – particle swarm, cuckoo search and BAT algorithms

Bio-inspired optimisation algorithms have recently attracted much attention in the control community. Most of these algorithms mimic particular behaviours of some animal species in such a way that allows solving optimisation problems. The present paper aims at applying three metaheuristic methods for optimising fuzzy logic controllers used for quadrotor attitude stabilisation. The investigated methods are particle swarm optimisation (PSO), BAT algorithm and cuckoo search (CS). These methods are applied to find the best output distribution of singleton membership functions of the fuzzy controllers. The quadrotor control requires measured responses, therefore, three objective functions are considered: integral squared error, integral time-weighted absolute error and integral time-squared error. These metrics allow performance comparison of the controllers in terms of tracking errors and speed of convergence. The simulation results indicate that BAT algorithm demonstrated higher performance than both PSO and CS. Furthermore, BAT algorithm is capable of offering 50% less computation time than CS and 10% less time than PSO. In terms of fitness, BAT algorithm achieved an average of 5% better fitness than PSO and 15% better than CS. According to these results, the BAT-based fuzzy controller exhibits superior performance compared with other algorithms to stabilise the quadrotor.

Outlier Detection Based Feature Selection Exploiting Bio-Inspired Optimization Algorithms

The curse of dimensionality problem occurs when the data are high-dimensional. It affects the learning process and reduces the accuracy. Feature selection is one of the dimensionality reduction approaches that mainly contribute to solving the curse of the dimensionality problem by selecting the relevant features. Irrelevant features are the dependent and redundant features that cause noise in the data and then reduce its quality. The main well-known feature-selection methods are wrapper and filter techniques. However, wrapper feature selection techniques are computationally expensive, whereas filter feature selection methods suffer from multicollinearity. In this research study, four new feature selection methods based on outlier detection using the Projection Pursuit method are proposed. Outlier detection involves identifying abnormal data (irrelevant features of the transpose matrix obtained from the original dataset matrix). The concept of outlier detection using projection pursuit has proved its efficiency in many applications but has not yet been used as a feature selection approach. To the author’s knowledge, this study is the first of its kind. Experimental results on nineteen real datasets using three classifiers (k-NN, SVM, and Random Forest) indicated that the suggested methods enhanced the classification accuracy rate by an average of 6.64% when compared to the classification accuracy without applying feature selection. It also outperformed the state-of-the-art methods on most of the used datasets with an improvement rate ranging between 0.76% and 30.64%. Statistical analysis showed that the results of the proposed methods are statistically significant.

Simulation of the ultimate conditions of fibre-reinforced polymer confined concrete using hybrid intelligence models

Fibre Reinforced Polymer (FRP) composites can provide efficient enhancements in terms of strength and deformability for concrete structures, in which accurate predictions of FRP confined concrete ultimate conditions is highly essential to maintain safety levels, further structural analysis and members design. In this paper, three novel hybrid intelligence models were proposed based on the hybridization of Support Vector Regression (SVR) model with three bio-inspired optimization algorithms as genetic algorithm (GA), particle swarm optimization (PSO) and Whale optimization algorithm (WOA) for predicting the ultimate conditions of FRP-confined concrete. Moreover, 15 existing empirical relations for the prediction of the ultimate strength and strain of FRP-confined concrete have been comprehensively reviewed. The performances of the empirical models and the proposed hybrid models as SVR-GA, SVR-PSO and SVR-WOA are evaluated and compared based on a large database, including 780 circular FRP-confined concrete specimens, which are collected from the open-source published experiments. By comparing the predicted results based on several statistical indicators, the proposed hybrid SVR-models are generally outperforming the existing empirical relations in terms of accuracy and agreement with the experimental database. SVR-WOA provides superior performances than SVR-PSO, SVR-GA and all existed empirical models. The root mean square error is improved using SVR-WOA by 0.9%, 14.9 % and 37% for the ultimate strain capacity, and 2.7%, 4.6% and 17.3% for the ultimate strength compared to SVR-PSO, SVR-GA and the best empirical relation, respectively.

Multi-Mode Wave Energy Converter Design Optimisation Using an Improved Moth Flame Optimisation Algorithm

Ocean renewable wave power is one of the more encouraging inexhaustible energy sources, with the potential to be exploited for nearly 337 GW worldwide. However, compared with other sources of renewables, wave energy technologies have not been fully developed, and the produced energy price is not as competitive as that of wind or solar renewable technologies. In order to commercialise ocean wave technologies, a wide range of optimisation methodologies have been proposed in the last decade. However, evaluations and comparisons of the performance of state-of-the-art bio-inspired optimisation algorithms have not been contemplated for wave energy converters’ optimisation. In this work, we conduct a comprehensive investigation, evaluation and comparison of the optimisation of the geometry, tether angles and power take-off (PTO) settings of a wave energy converter (WEC) using bio-inspired swarm-evolutionary optimisation algorithms based on a sample wave regime at a site in the Mediterranean Sea, in the west of Sicily, Italy. An improved version of a recent optimisation algorithm, called the Moth–Flame Optimiser (MFO), is also proposed for this application area. The results demonstrated that the proposed MFO can outperform other optimisation methods in maximising the total power harnessed from a WEC.

A classification-based fuzzy-rules proxy model to assist in the full model selection problem in high volume datasets

ABSTRACT Improvement of accuracy in classifiers is a crucial topic in the machine learning field. The problem has been addressed, making new algorithms and selecting the fittest classifier for a given dataset. The latter approach combined with feature selection and pre-processing form up a new paradigm known as Full Model Selection. This paradigm is like a black box whose input is a dataset, and as an output, a precise classification model is obtained. Despite that, full model selection is not the first alternative with the larger datasets of nowadays. We propose the use of MapReduce to deal with huge datasets, a bio-inspired optimisation algorithm and the use of a novel algorithm based on fuzzy classification rules as a proxy model to guide the optimisation process. To the best of our knowledge, this work is the first to propose a classification algorithm based on fuzzy rules as a proxy model. Obtained results showed an accuracy improvement and a considerable reduction of the computing time in datasets of a wide range of sizes.