Bioaccessible Metal Fractions Research Articles

The mechanistic understanding of potential bioaccessibility of toxic heavy metals in the indigenous zinc smelting slags with multidisciplinary characterization

Smelting slags is a well-known industrial solid waste, while there were limited studies on the key factors controlling the potential health risks caused by these smelting slags. In this work, the metal bioaccessibility in the size fractionated–zinc smelting slags was examined using various In vitro assays, in combination with multidisciplinary methods. The results indicated that the bioaccessible fractions of heavy metals showed a significant difference, but no statistical difference among different particle sizes of the zinc smelting slags. The bioaccessible metal fractions in the gastric (GP) and gastrointestinal (GIP) phases were 0 (Cr) – 91.39% (Cd)) and 0 (Cr) – 47.80% (Ni). Among the studied metals, Cd, Cu, Mn, Pb and Zn were the most bioaccessible to human. The Pearson correlation analysis showed that the carbonate bound phases of heavy metals were responsible for their bioaccessibility in GP and GIP. Moreover, the combined results of multidisciplinary characterization also further implied that the solubility behaviors of toxic elements in the smelting slags were dominated by soluble metal bearing– mineral phases and absorbable Fe, Mn and Al–rich minerals and metal bearing–precipitates during SBRC extractions. Therefore, these study results provide a insight into the potential controls of metal bioaccessibility in the zinc smelting slags, which was of great significance from the aspects of their resource recycling and risk management.

Determination of total concentration and bioaccessible fraction of metals in tomatoes and their derivatives by MIP OES

This study presents information about the total concentration and bioaccessible fraction of barium (Ba), calcium (Ca), cadmium (Cd), copper (Cu), iron (Fe), mercury (Hg), potassium (K), lithium (Li), magnesium (Mg), manganese (Mn), molybdenum (Mo), lead (Pb) and zinc (Zn) in different cultivars of tomato (Gaucho, Paulista, Italiano and Cherry) and their derivatives (sauce and tomato extract). The determinations were performed by microwave induced plasma optical emission spectrometry (MIP OES). The bioaccessible fraction of the elements was evaluated through in vitro digestion process and the concentrations varied between 25 and 100 % ​for Cu, Fe, Mn and Zn, depending on the type of tomato sample and its derivatives. The total concentrations for all the elements studied were below the recommendation of dietary guidelines. For Ba, only the Italiano sample presented 22 % of bioaccessibility. For Pb, the highest percentage of bioaccessible fraction was found in sauces and tomato extracts. The elements Cd, Hg, Li and Mo presented concentrations lower than the limit of detection for the bioaccessibility method.

Analysis of PM10, Pb, Cd, and Ni atmospheric concentrations during domestic heating season in Sarajevo, Bosnia and Herzegovina, from 2010 to 2019

This paper examines atmospheric concentrations of particulate matter with an aerodynamic diameter smaller than 10 μm (PM10) and related particle-phase toxic heavy metals Cd, Ni, and Pb during domestic heating seasons from 2010 to 2019 in Sarajevo, Bosnia and Herzegovina. In total, 242 daily PM10 samples were collected using medium and high volume air samplers. The mean daily PM10 mass concentration for all measurements is 75.16 μg/m3 (with the range of 28.77–149.00 μg/m3). Variation of ambient PM10 was observed throughout the study in different years. Hourly values for PM10 measurements during two heating seasons are also presented. Metal concentrations in PM10 were analyzed by electrothermal atomic absorption spectrometry (ETAAS). Quantities of atmospheric mass concentrations of studied trace metals were observed in the following order: Pb > Ni > Cd. The mean concentrations of metals varied with Pb showing the highest concentration (ranging from 1.38 to 234.00 ng/m3), Ni ranging from 0.87 to 42.43 ng/m3, and Cd showing the lowest concentration ranging from 0.26 to 10.09 ng/m3. The concentration of Pb and Cd in PM10 was strongly correlated, suggesting a common source or dependence of these metals in PM10 in Sarajevo. Bioaccessibility of metals in the synthetic gastric juice was also estimated. The quantities of average bioaccessible metal fractions in PM10 samples showed the following trend: Cd > Pb > Ni. The health risk assessment shows that the population of Sarajevo is at increased lifetime risk of experiencing cancer because of exposure to these Cd concentrations in PM10. In addition, parallel PM10 sampling on two samplers showed that obtained results are highly comparable.

The first pollution investigation of road sediment in Gary, Indiana: Anthropogenic metals and possible health implications for a socioeconomically disadvantaged area

An investigation of road sediment in Gary, Indiana revealed high levels of various trace metals such as Zn, Mn, and Cr, often exceeding those of background reference concentrations as shown through geoaccumulation indices and contamination factors. The hazard index (HI) value for Mn in children was >1 (1.7), suggesting possible long-term non-carcinogenic health risk. Mn HI for children is even higher for the five samples closest to a US Steel facility, with an HI of 2.8. Through SEM-EDS analysis, the prevalence of small particulates (PM2.5 and PM2.5–10) containing potentially harmful elements such as Mn and Pb illustrate a health risk through direct inhalation or ingestion. The small nature of particulates in general may also pose an increased health risk for respiratory diseases such as asthma. Mn concentrations in the road sediment were particularly high, with 30 out of 32 samples exceeding 1800 ppm. Mn and V concentrations show a strong spatial trend of decreasing concentration away from a US Steel facility. These spatial trends along with correlation plots of the bulk chemistry suggest that industrial steel manufacturing, particularly US Steel in Gary, is a major contributing source of Mn and V. Fe and Cr show a moderate decrease in concentrations away from the US Steel facility, which suggests some sourcing from the steel facility when coupled with bulk chemistry plots. Zn and Cu do not show much evidence of sourcing from the US Steel facility, likely due to increased mixing from other sources. Further work constraining anthropogenic sources, the bioaccessible fraction of metals, and analysis of direct atmospheric particulates can help with remedial activity and risk assessment.

Determination of total concentration and bioaccessible fraction of metals in infant cereals by MIP OES

The present study provides information about the total concentration and bioaccessible fraction of metals Al, Ba, Bi, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Pb, Ti and Zn in nine different infant cereal samples. An in vitro digestion method was employed to evaluate the bioaccessibility. The determinations were performed by microwave induced plasma optical emission spectrometry (MIP OES). The bioaccessibility varied according to the type of infant cereal sample. The values of bioaccessible fraction (minimum and maximum) for Cu, Fe, Mn, Pb and Zn were 24–68, 1–10, 7–58, 24–100 and 1–7% of the total concentration, respectively. Al and Ti presented bioaccessibility in only two samples: 6% in the multicereal A and 14% in the rice and oat cereal B, respectively. The concentration of Ba, Bi, Cd, and Cr was below the limit of detection for the bioaccessibility method. The obtained concentrations were lower than the daily recommended intake for essential and toxic elements, with exception of Pb in the rice and oat A sample.

Occurrence of selected trace metals and their oral bioaccessibility in urban soils of kindergartens and parks in Bratislava (Slovak Republic) as evaluated by simple in vitro digestion procedure

A total of eighty surface soil samples were collected from public kindergartens and urban parks in the city of Bratislava, and the <150µm soil fraction was evaluated for total concentrations of five metals, Cd, Cu, Hg, Pb and Zn, their oral bioaccessibilities, non-carcinogenic and carcinogenic health risks to children, and lead isotopic composition. The mean metal concentrations in urban soils (0.29, 36.1, 0.13, 30.9 and 113mg/kg for Cd, Cu, Hg, Pb and Zn, respectively) were about two times higher compared with background soil concentrations. The order of bioaccessible metal fractions determined by Simple Bioaccessibility Extraction Test was: Pb (59.9%) > Cu (43.8%) > Cd (40.8%) > Zn (33.6%) > Hg (12.8%). Variations in the bioaccessible metal fractions were mainly related to the total metal concentrations in urban soils. A relatively wide range of lead isotopic ratios in urban soils (1.1598–1.2088 for 206Pb/207Pb isotopic ratio) indicated a combination of anthropogenic and geogenic sources of metals in the soils. Lower values of 206Pb/207Pb isotopic ratio in the city centre and similar spatial distribution of total metal concentrations, together with their increasing total concentrations in soils towards the city centre, showed that traffic and coal combustion in former times were likely the major sources of soil contamination. The non-carcinogenic and carcinogenic health risks to children due to exposure to metals in kindergarten and urban park soils were low, with hazard index and cancer risk values below the threshold values at all studied sites.

On-line dynamic extraction system hyphenated to inductively coupled plasma optical emission spectrometry for automatic determination of oral bioaccessible trace metal fractions in airborne particulate matter.

For a realistic evaluation of the potential hazard emanating from airborne particulate matter (APM), the determination of the total inhaled metal amounts associated with APM is insufficient in risk assessment. Additional information about metal fractions that can be mobilized by the human body is necessary, because only those soluble (also called bioaccessible) fractions can be absorbed by the human body, and thus potentially cause adverse health effects. In the present study, a dynamic flow-through approach as a front end to inductively coupled plasma optical emission spectrometry (ICP-OES) exploiting advanced flow analysis is employed for on-line handling of multiple APM samples and determination of bioaccessible trace metals under worst case extraction scenarios. The method is based on on-line continuous extraction of filter samples with synthetic gastric fluid followed by on-line ICP-OES measurement of the dissolved fraction of trace metals. The assembly permits an automated successive measurement of three sample replicates in less than 19min. The on-line extraction procedure offers increased sample throughput and reduced risk of sample contamination and overcomes metal re-adsorption processes compared to the traditional batch-wise counterparts. Furthermore, it provides deeper information on the kinetics of the leaching process. The developed procedure was applied to the determination of bioaccessible metal fractions (Al, Ba, Cu, Fe and Mn as model analytes) in PM10 samples from Palma de Mallorca (Spain) and Vienna (Austria). Graphical Abstract On-line gastric bioaccessibility of elements in airborne particulate matter.

Chemical fraction, leachability, and bioaccessibility of heavy metals in contaminated soils, Northeast China.

Heavy metals in urban soils may pose risks to both urban environment and human health. However, only a fraction of heavy metals in soil is mobile and/or bioavailable for plant uptake and human ingestion. This study evaluates the chemical fraction and potential mobility and bioaccessibility of heavy metals (Cd, Cr, Cu, Pb, and Zn) in the contaminated urban topsoils from steel-industrial city (Anshan), Northeastern China. Chemical forms of heavy metals in soils are determined using Tessier sequential extraction technique. The toxicity characteristic leaching procedure (TCLP), ethylenediaminetetraacetic acid (EDTA), and US Pharmacopeia methodology (USPM) are used to determine the operationally defined potentially mobile and bioaccessible metal fractions, respectively. Sequential extraction results show that Cd has the highest percentage of exchangeable form, whereas Cr primarily exists in residual form. The non-residual fraction of heavy metals increases in the order of Cr < Cu < Pb < Zn < Cd. The leachability of heavy metals evaluated by TCLP test indicates that Cd, Zn, Cu, and Pb have much higher mobile than Cr. The bioavailability of heavy metals determined by EDTA extraction decreases in the order of Pb > Cu ≅ Zn > Cd > Cr. The order of bioaccessibility determined by USPM extraction is Pb = Cu > Zn > Cd > Cr. The Cr exhibits the lowest leachability and bioaccessibility among the investigated metals. The Pb has the highest bioaccessibility, indicating higher potential hazard for the human health. There are significant relationships between the EDTA- and USPM-extractable metals (Cd, Cu, Pb, and Zn) and the sum of first three steps of sequential extraction. Highly significant correlation is found between amounts of EDTA-extractable Cd, Cu, Pb, and Zn and USPM-extractable metals. The result suggests that EDTA extraction can be helpful to estimate the bioaccessibility of heavy metals for human ingestion. Introduction of mobile and human bioaccessible concentrations into risk assessments can give more realistic implications for urban environmental management.

Determination of the bioaccessible fraction of metals in urban aerosol using simulated lung fluids

Determination of the bioaccessible fraction of metals in atmospheric aerosol is a significant issue with respect to air pollution in the urban environment. The aim of this work was to compare of metal bioaccessibility determined according to the extraction yields of six simulated lung fluids. Aerosol samples of the PM1 fraction were collected in Brno, Czech Republic. The total contents of Cd, Ce, Cr, Cu, Fe, Mn, Ni, Pb, V, and Zn in the samples were determined and their enrichment factors were calculated. The bioaccessible proportions of elements were determined by means of extraction in Gamble’s solution, Gamble’s solution with dipalmitoyl phosphatidyl choline (DPPC), artificial lysosomal fluid, saline, water, and in a newly proposed solution based on DPPC, referred to as “Simulated Alveoli Fluid” (SAF). The chemical composition and surface tension of the simulated lung fluids were the main parameters influencing extraction yields. Gamble’s solutions and the newly designed solution of SAF exhibited the lowest extraction efficiency, and also had the lowest surface tensions. The bioaccessibility of particulate metals should be assessed by synthetic lung fluids with a low surface tension, which simulate better the behavior and composition of native lung surfactant. The bioaccessibility of metals in aerosol assessed by means of the extraction in water or artificial lysosomal fluid can be overestimated.

Management of human health risk in the context of kitchen gardens polluted by lead and cadmium near a lead recycling company

At the global scale, gardening activities are often performed in urban areas with a historical background of pollution. In this study, a participatory program was developed with citizens concerned by gardening activities near a 50-year-old regulated lead recycling company, with the aim of co-constructing the tools for the assessment and management of potential sanitary risks induced by historic pollution with persistent (eco) toxic metals: lead and cadmium. Soils and vegetables (lettuce, leek, celery, carrot, chard, pumpkin, and celeriac) samples were collected from four kitchen gardens neighboring a 50-year-old secondary lead smelter. Both total and in vitro human bioaccessible metal concentrations in the cultivated plants were measured in relation to soil characteristics. The results showed that the soils of these gardens were slightly contaminated by metals (Pb, 77 to 236 mg kg−1; and Cd, 0.5 to 1 mg kg−1) in comparison with the natural geologic background. However, significant pollution of vegetables can occur especially with lead (Pb up to 9.8 mg kg−1 in lettuce) and certainly as a result of direct foliar transfer. The washing of plants before consumption is therefore recommended in the context of atmospheric fallout of ultrafine particles enriched with metals. Metal bioaccessibility measure integrates the influence of metal type, plant type, and soil physico-chemical properties. Based on the results, it is proposed that human bioaccessible fraction of metals may also be currently taken into account as well as total metal quantities and bioaccumulation factors in risk assessment studies performed in gardens. Overall, this study has led to reflections and functional recommendations aimed at reducing human exposure and to finally developing sustainable gardening practices.

Combining spatial distribution with oral bioaccessibility of metals in smelter-impacted soils: implications for human health risk assessment

Geostatistical analysis and GIS-based spatial mapping have been widely used for risk assessment of environmental pollution. The objectives of this study were to: (1) investigate the spatial variability of pseudototal concentrations of Cd, Pb, and Zn; (2) estimate the degree of contamination on the basis of pollution indexes; and (3) combine geostatistical analysis with oral bioaccessibility to better assess the population's exposure to metals in smelter-impacted soils. Implications for human health risks were assessed by considering soil as a contaminant source, a release mechanism of contaminated soil to the hands, ingestion as an exposure route, and metal bioaccessibility. The bioaccessibility data in the gastric (G) and gastrointestinal (GI) phases were integrated into the standard hazard quotient-based risk assessment method. Using pollution indices showed that the entire area studied was highly polluted in terms of soil metal concentrations. However, the spatial pattern of health risk levels did not coincide with the spatial distribution of the degree of soil contamination. Introducing the bioaccessible fraction of metals from soils into the exposure calculations resulted in a substantial decrease in calculated risk (HI, hazard index) and provided a more realistic estimate of exposure to the three metals. For the highly exposed population, 46% of the soils studied provided an HI-G > 1.0 and 15% provided an HI-GI > 1.0, suggesting probable adverse health effects in children. The present study highlights the importance of conducting studies taking into account metal bioaccessible values in risk assessment.

HCl-Extractable Metal Profiles Correlate with Bacterial Population Shifts in Metal-Impacted Anoxic Coastal Sediment from the Wet/Dry Tropics

Metal impacted, anoxic sediments from five sites at a coastal location in the wet/dry tropics of Australia were sampled during both wet and dry seasons. Metal concentrations in total sediment and porewater, and in potentially bioavailable and bioaccessible fractions, were measured. Pyrosequencing was used to sequence bacterial DNA extracted from the sediment, and the sequence data was used to generate community profiles at each sample site. Changes in bacterial populations between sites reflected changes in the concentrations of 7 metals/metalloids (Al, V, Mo, Ga, Zn, Cd, As), and best correlated with the HCl-extractable fraction of metals. Bacterial community structure was also related to physicochemical factors, such as redox potential and organic carbon. Despite a strong sulphide gradient across the transect, acid-volatile sulphide was not significantly correlated to bacterial community structure. We conclude that the bioaccessible fraction of metals to bacteria is partly comprised of particulates, and porewater alone is not a sufficient model for potential metal impact. [Supplementary materials are available for this article. Go to the publisher's online edition of Geomicrobiology Journal to view the two supplementary tables.]

Comparison of the extraction efficiencies of different leaching agents for reliable assessment of bio-accessible trace metal fractions in airborne particulate matter

In present study, an in-vitro physiologically based extraction test has been applied for extraction of bio-accessible trace metal fractions in airborne particulate matter (APM) samples collected from different urban sites in Austria and Pakistan using the leaching agents H2O, sodium chloride, ammonium acetate, ammonium citrate, synthetic gastric juice and artificial lung fluids. Obtained extracts were then measured using an ETV-ICP-OES procedure which allowed highly sensitive measurement of dissolved analytes even in the presence of leaching agents. Derived results indicated that the investigated leaching agents extract different amounts of trace metals. In general, leaching agents with organic nature yielded comparatively greater extractable and thus bio-accessible trace metal fractions to that of simple solvents like H2O or aqueous NaCl solution. With water, only 26.3±4.0% of Cd was found to be bio-accessible whereas 88.4±24.8 of Cd was obtained as bio-accessible fraction with the use of synthetic gastric juice. The concentrations of bio-accessible metal fractions varied from 0.4 ng m−3 (Cd) to 714 ng m−3 (Zn) and 0.3 ng m−3 (Cd) to 190 ng m−3 (Zn) for PM10 samples collected from Karachi (Pakistan) and Graz (Austria) respectively.

The mobility, bioavailability, and human bioaccessibility of trace metals in urban soils of Hong Kong

Abstract Trace metals in soils may pose risks to both ecosystem and human health, especially in an urban environment. However, only a fraction of the metal content in soil is mobile and/or available for biota uptake and human ingestion. Various environmental availabilities of trace metals (Cu, Pb and Zn) in topsoil from highly urbanized areas of Hong Kong to plants, organisms, and humans, as well as the leaching potential to groundwater were evaluated in the present study. Forty selected soil samples were extracted with 0.11 M acid acetic, 0.01 M calcium chloride, 0.005 M diethylenetriaminepentaacetic acid, and simplified physiologically based extraction tests (PBET) for the operationally defined mobilizable, effectively bioavailable, potentially bioavailable, and human bioaccessible metal fractions, respectively. The metals were generally in the order of Zn > Cu ∼ Pb for both mobility (24%, 7.6%, 6.7%) and effective bioavailability (2.8%, 0.9%, 0.6%), Pb (18%) > Cu (13%) > Zn (7.4%) for potential bioavailability, and Pb (59%) ∼ Cu (58%) > Zn (38%) for human bioaccessibility. Although the variations in the different available concentrations of metals could mostly be explained by total metal concentrations in soil, the regression model predictions were further improved by the incorporation of soil physicochemical properties (pH, OM, EC). The effectively bioavailable Zn and Pb were mostly related to soil pH. Anthropogenic Pb in urban soils tended to be environmentally available as indicated by Pb isotopic composition analysis. Combining various site-specific environmental availabilities might produce a more realistic estimation for the integrated ecological and human health risks of metal contamination in urban soils.

Development of an ETV-ICP-OES procedure for assessment of bio-accessible trace metal fractions in airborne particulate matter

The present study describes an ETV-ICP-OES procedure for determination of bio-accessible fractions of Ba, Co, Cu, Mn, Ni and Pb in airborne particulate matter. The method is based on the preliminary extraction of trace metals with synthetic gastric juice using a physiologically based extraction test and the subsequent measurement of gastric extracts with ETV-ICP-OES. Signal quantification was based on external calibration with aqueous standard solutions using In as internal standard. The limits of detection (LOD) calculated as three times the standard deviation (3σ) of the signal derived from filter blank samples ranged from 1.8 ng (Mn) to 12.2 ng (Cu) for analyzed aliquots of 40 μl sample extracts which translates to a method detection limit of 0.11 ng m−3 (Mn) to 0.75 ng m−3 (Cu). The reproducibility of analysis is given as the relative standard deviation varied from 1.9% (Cu) to 5.7% (Ni). Compared to conventional ICP-OES measurement of sample extracts, the developed ETV-ICP-OES procedure was found to offer enhanced sensitivity. The accuracy of the developed method was assessed by analysis of the same sample set with the conventional ICP-OES procedure using liquid sample introduction as well as by comparison of total metal contents and the cumulated sum of extractable metal contents and those remaining after sample extraction, showing good recoveries for all investigated elements. Finally the developed procedure was applied for determination of bio-accessible trace metal fractions in PM10 samples collected from Graz-Sud (Austria) indicating that mean bio-accessible metal fractions varied between 32 ± 14% (Ni) and 97 ± 36% (Pb).

Bioaccessible and quasi-total metals in soil and indoor dust

Children are exposed to metals via the ingestion of household dust and soil, but contaminated household dust is much less documented than outdoor soil. In France, environmental home surveys are carried out to assess the exposure of young children to bioaccessible lead. In other countries, most surveys of metal in dust are based on “total digestion” using strong acid to extract all the metals present in dust samples. To compare metal contamination in household dust in France with data from other countries, a sequential extraction protocol was developed to assay metal concentrations in the bioaccessible fraction as well as in “quasi-total” digestion. Nine metals (As, Cd, Cr, Cu, Mn, Pb, Sb, Sr and V) were chosen for analysis on the basis of their mean contamination level and toxicity. Analyses were performed by inductively coupled plasma mass spectrometry (ICP/MS). The “total” digestion was validated for metals using NIST Standard Reference Materials ® SRM 2583 and SRM 2584 for Cr, As, Cd and Pb in dust samples and nine metals in certified reference material CRM SS2 for soil samples. The quasi-total digestion recovery for the SRM dusts and CRM soil samples was more than 72 % for all metals, with a relative standard deviation of less than 14 %, except for Cd. For the first time, the bioaccessible fraction of metals was evaluated in SRM 2583, SRM 2584 and CRM SS2. This new protocol was tested on dust samples (75) and soil samples (4) from 13 French homes, and results are expressed here for the first time in μg/m 2 . The metal bioaccessibility in dust is very variable, ranging from 0 to 100 %. The most bioaccessible metals are Cd, Cu, Mn, Pb and Sr, while As, Cr, Sb and V are the least. This combined determination of metal concentrations in the bioaccessible fraction and quasi-total digestion from dust wipes and soil samples appears to be an appropriate method for assessing human exposure to metals via dust and soil ingestion.

Monitoring approaches to assess bioaccessibility and bioavailability of metals: Matrix issues

Bioavailability and bioaccessibility are complex issues that determine whether or not adverse effects are to be expected when organisms or plants are exposed to contaminants. Clearly, the determinants of bioavailability and bioaccessibility must be understood if one is to monitor or, ultimately, predict the effects of metals. On the basis of a dynamic conceptual model, this article offers an analysis of the physicochemical and biological determinants underlying bioavailability and bioaccessibility. This analysis is used as the basis for a general monitoring strategy for assessing potentially and actually available and accessible metal fractions in the environmental matrices of water, soil, and sediment. We conclude that, lack of a universal expression of bioavailable and bioaccessible metal fractions precludes the presentation of a detailed monitoring strategy that is broadly applicable. Instead, we recommend that a critical assessment of the endpoints of determination become the basis for a need-specific monitoring strategy.

Bioaccessibility of Metals in Soils for Different Liquid to Solid Ratios in Synthetic Gastric Fluid

The bioaccessible fraction of metals in the stomach has been estimated for two soil materials using laboratory synthesized gastric juice. Heavy metals present in each soil matrix were extracted and measured, as a technique to simulate metal solubilization processes that occur in the human stomach. The results from the synthetic gastric juice extraction were compared to values obtained using a modified EPA concentrated acid extraction procedure, method 3051, on the same soils. The experiments evaluated the effect of varying the liquid to solid ratio on gastric juice extraction efficiency for arsenic (As), chromium (Cr), nickel (Ni), cadmium (Cd), and lead (Pb). Soil samples employed were a National Institute of Standards and Technology (NIST) standard soil (Montana SRM 2710) and a composite hazardous waste contaminated soil from Jersey City, NJ. The current work demonstrates that bioaccessibility is not the same for each metal within a given soil, nor between the soils. Estimates of the bioaccessible fraction of the metals studied ranged from 2 to 61% of the NIST certified values for Montana soil, and from 3% to 58% of EPA method 3051 values in contaminated Jersey City soil. The experiments indicated that the bioaccessibility of metals in the soils extracted by the in vitro synthetic gastric juice will only be affected slightly by changes in gastric fluid liquid to solid ratios for the range 100:1 to 5000:1 (mL/g). Further, the masses of each soil (0.05 or 0.5 g) used did not affect the bioaccessibility at the 1000:1 ratio.