Raw Materials Research Articles

Performance and Evaluation of Hanski 227 Oriental Tobacco in Dak Lak Region, Vietnam from 2022 - 2024

With the results of selecting Oriental tobacco varieties suitable for natural conditions in Vietnam, with potential for raw material quality and raw material production capacity in Vietnam, from 6 oriental tobacco varieties originating from Bulgaria, the Tobacco Institute has been testing in Ninh Thuan province from 2019 to 2021, and Dak Lak from 2021 to 2022. The results of the trial planting show that oriental tobacco varieties are good growth, and are quite suitable for the soil and climate conditions in Ninh Thuan and Dak Lak provinces, and have selected 2 the best oriental tobacco varieties as Basma 16 and Hanski 227. In which, Hanski 227 variety is evaluated to have outstanding prospects due to its good growth ability, high yield, characteristic aroma and good smoking properties. The Hanski 227 variety has less harvested leaves, larger leaf size and mass than Basma 16 variety, so the labor costs for cultivation, harvesting and preliminary processing are lower. To evaluate the ability to expand the oriental area in Vietnam, we continue to trial planting the Hanski 227 oriental variety in Dak Lak in 2023 - 2024, with a fertilizer level and a planting density corresponding to 50N + 30P2O5 + 80K2O (N: NH4NO3, P: (Ca(H2PO4)2 and K: K2SO4) and 110,000 plants/ha. The experimental trial results show the Hanski 227 variety has good growth, high yield, and good quality, with yield fluctuating 1.52 - 1.66 tons/ha, nicotine content: 0.81 - 1.38%, and reducing sugar content: 8.9 - 12.1%, and the oriental material has a characteristic aroma and good smoking properties. Based on the trial results shows that the quality of Hanski 227 grown in Dak Lak are the same the oriental tobacco importing from Bulgaria, Türkiye and Greece. Therefore, the Dak Lak province is the most suitbale region for producing good quality oriental tobacco in Vietnam compared to Ninh Thuan region. Because materials in Ninh Thuan has the high clorua content reducing material quality. In 2025, we continue to grow the Hanski 227 oriental tobacco variety in Dak Lak region on a large area and complete the preliminary processing process, with the goal of producing Oriental tobacco raw materials domestically, with appropriate production costs.

A review on sustainability challenges of flame retardants for textiles

Purpose A review of sustainability challenges of flame retardants (FRs) for textiles has been conducted. Specifically, the purpose of this paper is to identify and recommend solutions to sustainability challenges emanating from the raw material, processing technology and performance of the FRs used for textiles. Design/methodology/approach The approach used in preparing this paper was based on the review of various scholarly databases about the subject matter. The review approach is designed to inform the readers about the sustainability challenges of FRs for textiles. The science of burning and FRs for synthetic and cellulosic fibres were reviewed. Both synthetic and natural biodegradable FRs for textiles has been identified. The obtained literature was then synthesised to get information about sustainable challenges of non-halogenated FRs both synthetic and natural biodegradable. Finally, possible approaches for mitigating the identified challenges have been recommended. Findings The sustainability challenges of the FRs in terms of raw material, processing, affordability and performance have been identified. Synthetic FRs suffer from sustainability challenges in terms of raw materials, processing and non-renewability. Despite the environmental friendliness and sustainability in terms of being renewability, processability and biodegradability, natural biodegradable FRs have poor performance compared to synthetic ones. Moreover, natural biodegradable FRs depend on geographical condition and lack economic variability data. Potentially, the challenges of FRs can be mitigated through eco-friendly synthesis, chemical modification and sustainable methods of applications. Because of its renewability and environmental friendliness, biodegradable FRs have a potential to becoming sustainable if researched more. Originality/value In this review, a collection of literature about sustainability challenges of FRs and the approaches to overcome the challenges has been provided. The collected information was analysed and synthesised to bring understanding of the science of burning, types and application of FRs for textiles and biodegradable FRs. Sustainability challenges have been identified, and mitigation approaches are provided.

Elevated efficiency in tartrazine removal from wastewater through boron-doped biochar: enhanced adsorption and persulfate activation

Boron-doped biochar (B-BC) was synthesized by pyrolysis using solid waste of sorghum straw as raw material. The specific surface area of B-BC increased significantly by 2.38 times compared to that of pure BC. This enhancement allowed B-BC (0.3 g L−1) to achieve complete adsorption of 10 mg L−1 tartrazine (TTZ) within 40 min. Moreover, acidic conditions were more favorable for TTZ adsorption, achieving complete removal of TTZ in only 15 min at a pH of 3.0. Interestingly, the adsorption rate of TTZ by B-BC in the presence of 0.05 M Cl− was approximately 2.12 times higher than that in the absence of Cl−. When other background electrolytes were present, excluding PO43−, complete adsorption of TTZ could also be achieved within 60 min. Thermodynamic analysis and DFT calculations described the parameters of B-BC for TTZ adsorption, including ΔGΘ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\Delta {\ ext{G}}^{\\Theta }$$\\end{document} (< 0 kJ mol−1), ΔHΘ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\Delta {\ ext{H}}^{\\Theta }$$\\end{document} (− 2.199 kJ mol−1), ΔSΘ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\Delta {\ ext{S}}^{\\Theta }$$\\end{document} (− 6.068 J mol−1 K−1), and the adsorption energy (Eads = − 0.6919 eV), indicating a tendency towards a spontaneous adsorption process. Moreover, the strong electron transfer ability of B-BC and the oxygen-containing groups promoted the activation of PDS and generation of active substances such as 1O2, O2•−, and SO4•−, thereby degrading TTZ into products with lower biological toxicity. When the added PDS was only 0.1 mM, the degradation rate constant of TTZ could reach 0.1481 min−1. Furthermore, boron doping enhanced the stability of biochar, enabling the complete removal of 10 mg L−1 TTZ even after recycling and regeneration. In summary, this study offers a practical solution for the resource utilization of solid waste sorghum straw and the treatment of TTZ-polluted wastewater.Graphical

Implementasi Data Mining Prediksi Penjualan Produk Semen Menggunakan Metode Linear Regression (Studi Kasus PT. Toyo Mortar Indonesia)

The cement industry in Indonesia plays a vital role in infrastructure development and the construction sector. PT. Toyo Mortar Indonesia, established in 2015 in the Tangerang industrial area, focuses on the production of instant mortar cement. However, the national cement industry faces the challenge of declining sales due to the pandemic, which has affected people's purchasing power and slowed down property and infrastructure projects. To achieve future growth potential, the right strategy is needed in sales planning. This study implements data mining using the linear regression method with the RapidMiner application to predict cement product sales. The data used includes historical sales data and product information from PT. Toyo Mortar Indonesia. In the tests conducted, the data was processed using 12 variables, of which 10 variables influenced the prediction results: TM-168, TM-178, TM-188, TM-189, TM-198, UM-100, UM-101, UM BIRU, raw materials, and other sales. The test results show that the Linear Regression method can predict cement product sales with an average Root Mean Square Error (RMSE) value of 493,125.701 with a standard deviation of 126,330.525. The average Absolute Error is 303,270.965 with a standard deviation of 46,207.586, and the average relative error is 1.89% with a standard deviation of 0.36%, indicating very good prediction accuracy. This can help the company in making decisions related to sales planning using the available sales data.

Impact of The Corporate Governance on Sustainability Report Disclosure with Environmental Performance as A Moderation Variable in Indonesia

This study aims to analyze the effect of corporate governance on sustainability report disclosure, with environmental performance acting as a moderating variable. The analysis focuses on the role of the board of directors, independent commissioners, audit committees, and financial performance in influencing the quality of sustainability reporting, particularly within the Indonesian context. Environmental performance is measured using the PROPER scale. The study utilizes data from the annual and sustainability reports of 20 companies in the basic materials and energy mining sectors listed on the Indonesia Stock Exchange from 2018 to 2022, amounting to 100 observations. The data is processed using SPSS 23. The results show that the presence of female directors significantly enhances the quality of sustainability disclosures, as they tend to prioritize social responsibility. Moreover, financial performance, as measured by Return on Assets (ROA), positively affects sustainability reporting, with companies in better financial health being more transparent in their disclosures. Environmental performance, when combined with strong independent oversight, further improves reporting quality, reflecting the positive influence of independent commissioners and sound financial governance. The study concludes that environmental performance, as measured by the PROPER scale, plays a significant role in improving sustainability disclosures in Indonesia. It recommends that the Indonesian government provide stronger support and clearer regulations to help companies improve their sustainability practices and contribute to the G20 agenda.

Brewer’s Spent Grains: from Secondary Resource to Secondary Raw Material

Brewer’s Spent Grains: from Secondary Resource to Secondary Raw Material

Waste From Alwar Quartzite (A Global Heritage Stone From Rajasthan - India) As Secondary Raw Materials for Cementitious Tile Adhesives

Waste deriving from quarrying operations of natural stone material retains almost all the mineralogical and compositional characteristics of the original material, for such reason this research aimed to test prototypes cementitious tile adhesives made up recycling the Alwar Quartzite waste, used as fine and ultra-fine aggregate. Particle size distribution analysis, along with X-ray diffractometry, X-ray fluorescence and Scanning Electron Microscopy were carried out to characterize the waste. Experimental research involved the mix-designing of three dough formulations (a regular one [N], a latex added [L] and a fast-setting [R]) tested by using different types of tiles: (i) polished metal plates, (ii) ceramic tiles and (iii) rough natural stone slabs. Fresh prepared doughs were firstly tested for thixotropy achieving high values (ranging 82–93%) and cured for normative requested time after being stuck on a concrete support as reported in European UNI standard regulations. After respective curing time, adhesives technical performances were evaluated by the Pull-Off test obtaining results for Class 1 (N and R) and Class 2 (L) adhesives with high initial tensile adhesive strength. Experimental results carried out in this research proved the possibility to use huge amounts of waste coming from Indian stone industry in cementitious tile adhesives sector without compromising technical performances, proposing itself as an alternative method to landfill disposal for this waste.

Effect of the Phenological Stage on the Phenolic Composition, and Antioxidant and Antimicrobial Properties of Cirsium vulgare (Savi) Ten. Extracts

Cirsium vulgare (Savi) Ten. is a plant from the Asteraceae family that is commonly used in traditional medicine. The purpose of this work was to investigate the antioxidant and antimicrobial characteristics of phenolic compounds found in ethanol and dry extracts of C. vulgare leaves, inflorescence, and roots during various phenological stages. Apigenin-7-O-glucoside and chlorogenic acid were identified in practically all C. vulgare extracts. Extracts from leaves collected at the end of the phenological dormancy period and in the first growing year had the highest antioxidant (cupric ion-reducing antioxidant capacity of 12,938 Trolox equivalents/g dry weight) and antimicrobial activity (against Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa, Proteus vulgaris, and Candida albicans) with MIC values of ethanol extract from 16.7 mg/mL to 8.35 mg/mL. These extracts included a high concentration of chlorogenic acid and apigenin-7-O-glucoside. Also, dry extracts from C. vulgare roots and inflorescences showed a higher antimicrobial effect compared to ethanolic extracts with MIC values from 5.57 mg/mL to 3 mg/mL. The study emphasizes the critical role of phenological stages and raw material composition in the accumulation of phenolic compounds and their biological activity in C. vulgare. The findings suggest that extracts from C. vulgare leaves, especially those collected at the end of the phonological dormancy period, are promising candidates for further research into bioactive compounds with potential medicinal applications. The strong antioxidant and antibacterial properties of these extracts highlight their potential for development into natural pharmaceutical products.

Development and Evaluation of Oromucosal Spray Formulation Containing Plant-Derived Compounds for the Treatment of Infectious and Inflammatory Diseases of the Oral Cavity

According to data in the literature, natural products and essential oils are often used in dental practice. To develop a new oromucosal spray for the treatment of infectious and inflammatory diseases of the oral cavity, clove CO2 extract and essential oils of lavender and grapefruit were used as active pharmaceutical ingredients. Clove extract was obtained by the method of subcritical extraction from various raw materials, the choice of which was based on the yield of the CO2 extract and the study of its phytochemical and microbiological properties. Based on the results of microscopic and diffraction analyses, the rational time of ultrasonic exposure for the emulsion of active pharmaceutical ingredients was established. Mucoadhesive polymers were used as stabilizers of the two-phase system and prolongators. This article discusses the impact of the type and concentration of mucoadhesive polymers on the stability of the emulsion system; the viscous, textural, adhesive, and film characteristics of oromucosal spray; and the parameters determining sprayability.

Adsorption behavior of graphite‐like walnut shell biochar modified with ammonia for ciprofloxacin in aqueous solution

AbstractBACKGROUNDGraphite‐like biochar of NWSC600K was prepared at 900 °C using walnut shell as the raw material and aqueous ammonia (NH3·H2O) as an activator, and characterized using transmission and scanning eletron microscopy (TEM, SEM), X‐ray diffraction (XRD), Brunauer–Emmett–Teller (BET), Raman spectroscopy and Fourier transform infrared (FTIR). The study investigated the adsorption performance and mechanism of NWSC600K for ciprofloxacin (CIP).RESULTSThe results showed that extremely tiny pores were found on the surface of NWSC600K, which increased its specific surface area to 823.91 m2 g−1, whereas the average pore size of NWSC600K decreased to 3.23 nm. The results of TEM, XRD and Raman spectroscopy detected well‐arranged lattice stripes as well as characteristic peaks corresponding to the graphite lattice appearing on the surface of NWSC600K. Moreover, the ID/IG value for NWSC600K was 1.429. The FTIR results showed that functional groups including the amino group were formed on NWSC600K.CONCLUSIONThe adsorption capacity of NWSC600K for CIP was 158.14 mg g−1 and the corresponding removal rate was 97.5% at pH 7. The pH value impact on the removal efficiency of CIP greatly, and the removal rate of CIP decreased linearly with increasing pH. The coexisting ions also would inhibit the adsorption of CIP on NWSC600K. Results obtained from kinetic and isotherm models, thermodynamics and characterization analyses suggested that pore‐filling, π–π stacking, hydrogen bonding, hydrophobicity and electrostatic interaction existed during the adsorption process. The adsorption was a nonspontaneous exothermic reaction. © 2024 Society of Chemical Industry (SCI).

Effect of Cell Size on the Mechanical Properties of the Porous Structure of a CuCrZr Alloy Formed by Selective Laser Melting Technology

The porous structure has been widely used in heat sinks in aerospace fields because of its good specific strengthand lightweight. The porous structure formed by selective laser melting technology offers many advantages, but it also presents some challenges, for instance, how to how to ensure that the density is greatly reduced without sacrificing the material's mechanical properties. The Schoen I‐graph‐wrapped package structure with different cell sizes under the same volume fraction had been designed and fabricated by selective laser melting technology using CuCrZr powder as the raw material. The microstructure, grain orientation, and static properties were explored. At the same volume fraction, the pores were almost completely blocked when the cell size was 2 mm, with reduced powder adhesion when the cell size was 9 mm. As the cell size decreases, the compressive strength increases, with the compressive strength reaching 180 MPa at a cell size of 2 mm. Moreover, the energy absorption efficiency increases with the increase in cell size, with the highest energy absorption efficiency of 28% at a cell size of 9 mm. The limit dimensions under these conditions were determined to provide a reference for related research in this field.

An Actualistic Experimental Study of Giant Quartzite Core Reduction Strategies: Implications for Large Flake Blank Production and Handaxe Manufacture at Amanzi Springs, South Africa

ABSTRACT The later Acheulian assemblages (ca. 534–< 390 ka) from Amanzi Springs in South Africa show a preferential selection for large flake blanks when undertaking large cutting tool manufacture. However, due to the small number of giant cores from the site, we have limited insight into the technical preparation of quartzite raw material packages for large flake production. Here, we present an actualistic experimental study to better understand these procedures at the site and to gain perspective on how knappers may have reduced quartzite boulders of differing internal qualities. Our results highlight the influence of raw material constraints and how the overall morphology of quartzite boulders in turn impacts giant core reduction sequences and large flake blank morphologies. Finally, the experimental study exemplifies the need for high levels of knapping expertise to deal with tough, heterogeneous quartzite varieties.

Solid Lipid Nanoparticles Incorporated with Retinol and Pentapeptide-18—Optimization, Characterization, and Cosmetic Application

Solid lipid nanoparticles (SLNs) incorporated with retinol and oligopeptide can have a full spectrum of effects on the skin as a compatible combination of ingredients with broad anti-aging properties. The research’s main objective was to ensure the stability of lipid nanocarriers containing retinol and peptide due to the planned use of this dispersion as a cosmetic raw material. To confirm the effectiveness of method optimization (high shear homogenization, HSH) and proper selection of substrates, SLN dispersions were obtained in three combinations: 1—non-incorporated SLNs; 2—SLNs containing only retinol; 3—SLNs containing retinol and pentapeptide-18; these were then stored at different temperatures (4, 25, 45 °C) for 4 weeks. The desired values of the physicochemical parameters of the optimized dispersion of lipid nanoparticles incorporated with retinol and oligopeptide over the required storage period were confirmed: mean particle size (Z-Ave) = 134.7 ± 0.3 nm; polydispersity index (PDI) = 0.269 ± 0.017 [−]; zeta potential (ZP) = 42.7 ± 1.2 mV (after 4 weeks at 25 °C). The results confirmed the proper selection of the SLN production method and the effectiveness of the optimization performed. The possibility of using the obtained raw material as an ingredient in cosmetic products with anti-aging properties was indicated.

Kinetics of Iron Collector Leaching in HCl and HF Media

Automotive catalysts containing Platinum Group Metals (PGMs) are valuable secondary raw materials for refineries. Hydrometallurgical processing of catalysts is ineffective due to the low PGMs content—0.15–0.3%. Therefore, such raw materials are melted into an iron collector containing 1.5–5% PGMs. However, when leaching a collector containing 10–20% Si in both HCl and H2SO4, the recovery of PGMs does not exceed 40%. The latter indicates incomplete destroying of the PGM-encapsulating ferrosilicon matrix. To completely destroy the ferrosilicon matrix, it is proposed to carry out the leaching process in a mixture of HCl and HF. In this case, the extraction of Fe into solution and Si into the gas phase (in the form of SiF4) exceeds 90%. This should be sufficient to completely destroy the ferrosilicon matrix and release PGMs. The current work presents the results of studies of the leaching kinetics of the iron collector containing ferrosilicon in a mixture of HCl and HF using the Shrinking Core Model (SCM). It was found that the greatest positive effect on Fe extraction into solution is exerted by HCl concentration and temperature, while Si release into the gas phase is only influenced by HF concentration. In addition, during the destroying of ferrosilicon, FeF2 is formed and deposited on the surface of the material in the form of thin-film conglomerates. This leads to diffusion difficulties and a gradual decrease in the intensity of the iron collector leaching 30 min after the start of process. After 120 min, there may be a decrease in Fe recovery into solution.

Creativity Efforts of Sasirangan Fabric Artisans in Increasing Sales in Islamic Economics Terms

This research is motivated by the important role of sasirangan cloth artisan in preserving local culture with diverse creativity. The aim of this research is to determine creativity in an effort to increase sales in terms of Islamic economics and the obstacles faced by artisan. This research is field research, with a qualitative approach. The research location is Sasirangan Village, Banjarmasin City. Data was obtained using interviews, with data processing techniques, then analyzed qualitatively and referring to the theoretical basis. The research results obtained are first, the creativity of Sasirangan cloth artisan in Sasirangan Village in an effort to increase sales in terms of Islamic economics is painting their own motifs, adding creations, participating in exhibitions, modifying motifs, using natural materials. Second, the obstacles faced by sasirangan cloth business artisan in Sasirangan Village in carrying out creativity are labor resource constraints, policy constraints regarding time regulations and constraints on raw materials, synthetic and natural dyes used in dyeing sasirangan cloth.

Additive Manufacturing of Waste Electrical and Electronic Equipment (WEEE) Produced From Acrylonitrile Butadiene Styrene (ABS)

Objective: To evaluate the feasibility of producing recycled acrylonitrile-butadiene-styrene (r-ABS) filaments from waste electrical and electronic equipment (W EEE) casings, specifically discarded monitors and televisions, and to compare their properties with those of virgin ABS. Theoretical Framework: The research was based on a literature review of additive manufacturing, WEEE recycling, and the thermal, mechanical, rheological, and microscopic characterizations of recycled polymers, with an emphasis on fused deposition modeling (FDM). Method: WEEE casings were collected and mechanically recycled to produce r-ABS filaments. These filaments were characterized and compared with virgin ABS filaments using infrared spectroscopy (FTIR), thermal analyses (TGA and DSC), rheological, mechanical, and microscopic evaluations. Results and Conclusion: The results indicated that r-ABS filaments exhibit properties comparable to those of virgin ABS. FTIR analysis revealed the presence of the main functional groups of ABS in the recycled samples. Thermal analysis showed similar behavior between the recycled and virgin materials, with a single thermal decomposition event. Rheological analysis demonstrated that r-ABS possesses viscoelastic properties suitable for the FDM process, and mechanical characterization showed that r-ABS exhibited tensile strength close to virgin ABS. Microscopic analysis revealed good layer adhesion and a low number of voids, factors that contribute to the quality of the printed objects. Research Implications: This study contributes to the valorization of polymeric waste, promoting the use of recycled materials in additive manufacturing processes, which can benefit both the environment and the 3D printing industry. Originality/Value: The research addresses a topic still underexplored in the literature, especially concerning the recycling of WEEE casings for the production of ABS filaments.

Reduced anthelmintic use on 13 New Zealand sheep farms: farmer motivations and practical implementation

ABSTRACT Aims: To describe the personal drivers, sources of information and gastro-intestinal parasite control methods used by a group of New Zealand sheep farmers identified as low users of anthelmintic (AHC), and their perception of the efficacy and impacts of this approach. Methods: A convenience sample of 13 sheep farmers farming with a policy of reduced AHC use (no pre-determined routine treatments of ewes >19 months old and/or lambs not routinely treated at pre-determined intervals from weaning through to late autumn) were identified. Semi-structured interviews were conducted regarding their farming philosophy, motivations for reducing AHC use, perceptions of the impacts of farming with reduced AHC use, and parasite control practices. Semi-quantitative data were analysed using descriptive statistics for demographic data and categorising participants’ use of AHC and non-chemical control methods. Qualitative data regarding participants’ motivations, approaches and rationale were analysed by systematic analysis of the transcripts and distillation of key concepts. Results: Participants had been operating with reduced AHC use for 3 to ≥20 years. Key motivators for reducing AHC use were a diagnosis of anthelmintic resistance (AR) or concerns about AR developing. Parasite management information came from a wide range of sources. All respondents expressed overall positive views regarding the impacts of reduced AHC use but detailed information was not available. All identified that regular monitoring, based primarily on subjective animal and non-animal factors was important for their parasite control strategy. Most used faecal egg counts (FEC), often in an ad hoc manner. Five never treated adult ewes, two routinely treated ewes prior to lambing with short-acting AHC and the remainder occasionally treated a small number in low body condition. Four routinely treated some or all lambs at 28–30-day intervals from weaning to late autumn while the remainder based their treatment decisions for lambs on monitored information. All placed heavy emphasis on feeding sheep well, ensuring high post-grazing residuals, and cross-grazing. Conclusions: AR was a key motivator for participants to reduce AHC use, and a range of information sources and decision-making processes were used. Key parasite management practices were monitoring, primarily using subjective assessments, emphasis on feeding stock well and cross-grazing. Clinical relevance: The rising prevalence of AR will likely result in increasing the motivation for sheep farmers to reduce their AHC use. Veterinarians will play a key role in providing advice and assistance to facilitate changes in parasite management.

Evaluating the Environmental Impact of Reusing Baghouse Dust in Asphalt Concrete: A Sustainable Approach

The purpose of this study is to assess the environmental impact of reusing baghouse dust in asphalt concrete production. Baghouse dust, a byproduct of asphalt creation, presents natural removal challenges; nonetheless, its true capacity reuse in asphalt concrete could give an economical solution. This study aims to survey and align the environmental and ecological implications of utilizing varying extents of baghouse dust in asphalt mix combinations. This research review starts by describing the physical and chemical properties of baghouse dust. In this way, substantial samples were ready and prepared with various percentage rates of baghouse residue to examine the effect on the mechanical properties of the mix. The discoveries demonstrate that consolidating baghouse dust into asphalt cement mostly decreases peak stress and strength qualities characteristics. As far as the environmental and ecological effect, the investigation analysis shows that utilizing baghouse residue can decrease in general energy utilization and discharge emissions. The energy utilization rate diminished from 500 MJ/ton for ordinary conventional asphalt to 400 MJ/ton for asphalt with 20% baghouse residue, and CO2 emanations decreased from 120 kg/ton to 80 kg/ton for a similar correlation. Also, the squander and waste decrease was huge, with 200 tons/year saved at 10% baghouse dust and 400 tons/year at 20%. Asset resources proficiency likewise improved, with raw unrefined material savings investment funds of 150 tons/year at 10% baghouse dust and 300 tons/year at 20%. Notwithstanding this decrease, the mechanical properties stay within ranges for specific applications, proposing that baghouse dust residue can be effectively and successfully utilized in non-basic underlying structural layers of asphalts.

Mathematical Modeling of Sorptive Extraction of Lithium Chloride from Lithium-containing Brine of the Aral Sea Region

Introduction The article presents the results of chemical and physicochemical analysis of initial lithium-containing hydromineral raw materials and sorbent based on bentonite clay with titanium oxide addition. Methods It is established that the mineral is montmorillonite group and kaolinite according to the results of the analysis of the microstructure and elemental composition of bentonitic clay of the Darbazinsky deposit. Brine is characterized by the change of lithium chloride content in the range of 403- 1001 mg/l. Physical and mechanical characteristics of the obtained sorbents based on bentonite clay and titanium oxide additive are characterized by a high mechanical strength of 5.31 MPa, density of up to 2,6 g/cm3, and specific surface area of 1572 cm2/g. The technological parameters of sorption extraction of lithium chloride from lithium-containing hydromineral raw materials were optimized using the system analysis “STATISTICA” developed by StatSoft company. It is established that to increase the rate of lithium chloride extraction from brine, it is necessary to maintain the rate of brine flow within 8 l/min at maximum humidity of solution output up to 43g/m3 on the basis of the obtained volumetric graphical dependencies. Results The microstructure of the used sorbents with titanium oxide addition up to 20% is characterized by the predominance of lithium chlorides, which are represented by heap-shaped, prismatic crystals. Conclusion The maximum amount of lithium chloride in the form of clusters of light-white crystals of tabular shape on the surface of the sorbent is observed at increasing the content of titanium oxide up to 40%.

Effect of Press Cake-Based Particles on Quality and Stability of Plant Oil Emulsions

Palm fat has uniquely optimal melting characteristics that are difficult to replace in products such as baked goods and chocolate-based items. This study investigates the efficacy of using Pickering emulsions derived from Swiss plant oils and their micromilled press cakes. Emulsification was carried out at both the lab and pilot scales using sunflower- and rapeseed-based recipes, with and without additional surfactants, for both oil-in-water and water-in-oil emulsions. The resulting emulsions were measured for viscosity and short- and long-term stability and linked to the properties of the raw materials. The results indicated that the contact angle, size, and macronutrient composition of the particles significantly impact emulsion quality, though differences in oil pressing methods might predominate these effects. The combination of particles and surfactants demonstrated a clear advantage with respect to interface stabilisation, with a suggested link between the wax content of the oil and particles and the resulting emulsion quality and stability.