Microwave Frequency Band Research Articles

Influence of side-methyl substitution position on the phase state and microwave dielectric properties of triphenylacetylene-based liquid crystals.

Liquid crystal materials are well known in display applications, and their unique birefringence and electrical tunability can be utilised in microwave devices. This innovative technology modulates and filters microwave signals, replacing conventional semiconductors for a broad operational frequency band and tunable phase shift. Although isothiocyanatobiphenylacetylene-based liquid crystals exhibit low viscosity and large dielectric anisotropy, their applications in microwave communication are hampered by their broad near-crystalline phase temperature ranges. To address this limitation, this study designed and synthesized six fluorinated biphenylacetylene liquid crystal compounds with various benzene ring side-methyl substitutions (n = 3-5). The molecular structures, liquid crystal phases, and microwave dielectric properties were evaluated. Our findings indicate that compounds with methyl substitution at the Y2 position exhibited reduced melting points, an expanded nematic phase temperature range (ΔT n ≈ 92.3 °C), and an absence of near-crystalline phases. These compounds still maintain high microwave dielectric constants within the 9-30 GHz frequency band (Δε r = 0.9-1.3) and reduced maximum permittivity losses compared to their non-methyl-substituted counterparts, thereby improving the efficiency in the microwave frequency band. In contrast, the Y1 position substitution results in a significantly narrower nematic phase temperature range (approximately 2.6 °C on average) and a substantial decrease in the dielectric constant, with a Δε r reduction of about 0.3 compared to the Y2 substitution. This work shows that the side-methyl substitution can improve the performance of triphenylacetylene-based liquid crystals in microwave communication, providing valuable insight to aid the discovery of novel microwave liquid crystals.

Analysis of 3D Printed Dielectric Resonator Antenna Arrays for Millimeter-Wave 5G Applications

This paper explores the potential use of fused deposition modeling (FDM) technology for manufacturing microwave and millimeter-wave dielectric resonator antennas (DRAs) for 5G and beyond communication systems. DRAs operating at microwave and millimeter-wave (mmWave) frequency bands were simulated, fabricated, and analyzed in terms of manufacturing quality and radio frequency (RF) performance. Samples were manufactured using a 3D printer and PREPERM® ABS1000 filament, which offers a stable dielectric constant (εr = 10 ± 0.35) and low losses (tan δ = 0.003) over wide frequency and temperature ranges. Surface profile tests and microscope measurements revealed discrepancies in the dimensions in the xy-plane and along the z-axis, consistent with the observed shift in resonant frequency. Despite these variations, reasonably good agreement between RF-simulated and measured results was achieved, and the DRA array successfully covered the intended mmWave band. However, challenges in achieving high precision may restrict applications at higher mmWave bands. Nevertheless, compared with conventional methods, FDM techniques offer a highly accessible and flexible solution with a wide range of materials for home and micro-manufacturing of mmWave DRAs for modern 5G systems.

Temperature tunable ultra-wideband absorber based on ionic liquid

Abstract In this paper, a temperature tunable ultra-wideband absorber based on ionic liquid is proposed for the microwave frequency band. The absorber consists of a band-resistive frequency selective surface, a 3D resin cavity vessel, and an ionic liquid ([EMIm][N(CN)2]) layer. Numerical simulation analysis shows that the absorptivity is more than 90% and a relative bandwidth is 113.04% in the range of 7.5–27 GHz. Meanwhile, the absorber absorptivity has different tuning effects in different frequency bands with the change of temperature. Along with the temperature going up, the absorptivity decreases in the low-frequency band of 6.5–14 GHz, the absorptivity increases in the high-frequency band of 28 GHz–40 GHz. It is worth mentioning that the proposed ionic liquid-based absorber has the characteristics of wide incidence angle and polarization insensitivity. Finally, the temperature tunable absorber model based on ionic liquid is fabricated by 3D printing technology. The experimental results are consistent with the simulation results, demonstrating that the absorber is practically feasible. In summary, the absorber achieves a wide frequency tuning range, which gives it great potential application prospects in fields such as frequency-selective thermal radiators.

Microwave scattering properties of ice crystal particles during the melting process.

Ice crystal particles play an important role in the study of cloud resolution, climate models, and radiative forcing. During the melting process, significant changes occur in the microphysical properties of ice crystal particles, such as the ice phase state, morphology, and mixing state. This process further affects the scattering and radiation characteristics properties of ice crystal particles. In this study, we constructed a non-spherical and inhomogeneous particle model based on the melting process of ice crystal particles. The scattering properties of melting ice crystal particles under four selected microwave frequency bands (92 GHz, 220 GHz, 280 GHz, and 340 GHz) are investigated by using discrete dipole approximation (DDA) method. The influence of ice crystal content (ICC) and particle aspect ratio on the scattering properties of ice crystal particles under thin coating and medium coating conditions are emphasized. The results show that the melting process significantly affects the scattering properties of melting ice crystal particles in a frequency dependent manner. Additionally, even slight melting of ice crystal particles leads to drastic changes in their scattering properties. Furthermore, we found that the morphology of ice crystal nuclei has a significant impact on their scattering characteristics even at medium levels of melting degree. In summary, this study confirms that it is essential to consider morphology and inhomogeneous characteristics during the melting process for microwave detection of ice crystal particles. This research may have significant implications for studies related to detection and inversion techniques for ice crystal particles.

Enhanced breast tumor localization with DRA antenna backscattering and GPR algorithm in microwave imaging

With the rapid rate of increasing breast cancer cases across the globe and restrictions of existing early stage detection techniques, microwave imaging based cancer and malignant cell diagnosing methodology is finding its way. Microwave imaging technology has higher accuracy of detection in the variation of tissue properties. In this article, a dielectric resonator based wide band antenna is designed and investigated for microwave imaging (MWI) of early breast cancer detection due to its improved accuracy. The designed antenna has compact size, broad frequency spectrum, high gain and broadside radiation characteristics. To attain the wider bandwidth from (6.5 GHz–12.5 GHz), two rectangular shaped dielectric slabs are used. Wide band microwave frequency band supports the high resolution images. A C-shaped defected ground structure is used to tune the impedance matching. Dielectric resonator based antenna has higher gain and reduces the squints in antenna impedance. Two-asymmetrical dielectric slabs contribute in the excitation of different resonating modes which in turn enhance the bandwidth. It also contributes to excite multiple resonance mode that in turn enhance the bandwidth. Antenna performance is first numerically and experimentally verified in free space. Then, simulation based performance is examined for the microwave imaging. Numerical phantom with equivalent tissue properties is designed with and without the tumor. Unhealthy cells have higher water percentage and larger dielectric constant as compared to healthy cells. It causes the different in the back scattered signal of antenna, which is analyzed to diagnose the tumor or cancer. Here, a maximum deviation of 16 dB is observed in the backscattered signal. Furthermore, surface of the breast tissue is scanned along the x-axis and y-axis at different angels. The collected signals are used to reconstruct the microwave image of the interior. Mean value data of backscattered signals is used to locate the existence of unhealthy cells and GPR algorithm is used to calculate the depth of a 4 mm tumor in breast tissue. Proposed structure has shown efficient performance for microwave imaging.

Nonreciprocity of surface acoustic waves coupled to spin waves in a ferromagnetic bilayer with noncollinear layer magnetizations

Nonreciprocity of propagation of surface acoustic waves (SAWs) in the microwave frequency band can be achieved using the magnetoelastic interaction of SAWs with spin waves (SWs) propagating in magnetic heterostructures. Recent works have shown that the ultimate isolation of a counterpropagating hybridized SAW/SW is achieved in heterostructures consisting of a synthetic antiferromagnet—a ferromagnetic (FM) bilayer with antiferromagnetic Ruderman-Kittel-Kasuya-Yosida interlayer coupling—placed on top of a piezoelectric acoustic waveguide. In this work, we study in detail a more practical and technologically simpler system based on an FM bilayer, where layers are coupled by only dipole-dipole interaction, and having noncollinear magnetizations of the FM layers. A weak in-plane anisotropy with noncollinear easy axes in the layers is shown to be the only essential factor for the realization of strongly nonreciprocal propagation of a hybridized SAW/SW. We formulate requirements for the relative orientation of the layer’s magnetizations and wave propagation direction necessary to realize an efficient SAW isolator, and demonstrate examples of SAW transmission characteristics which prove the possibility of achieving an isolation exceeding 50 dB for a submillimeter-long FM bilayer with insertion losses of just a few decibels more than those of a pure SAW device. In addition to relative fabrication simplicity, the proposed magnetoelastic heterostructure exhibits a reasonable robustness in respect to deviations in the anisotropy axes and/or bias field directions—an important benefit for device mass production. Published by the American Physical Society 2024

MXene-based kirigami designs: showcasing reconfigurable frequency selectivity in microwave regime

Today’s wireless environments, soft robotics, and space applications demand delicate design of devices with tunable performances and simple fabrication processes. Here we show strain-based adjustability of RF/microwave performance by applying frequency-selective patterns of conductive Ti3C2Tx MXene coatings on low-cost acetate substrates under ambient conditions. The tailored performances were achieved by applying frequency-selective patterns of thin Ti3C2Tx MXene coatings with high electrical conductivity as a replacement to metal on low-cost flexible acetate substrates under ambient conditions. Under quasi-axial stress, the Kirigami design enables displacements of individual resonant cells, changing the overall electromagnetic performance of a surface (i.e., array) within a simulated wireless channel. Two flexible Kirigami-inspired prototypes were implemented and tested within the S, C, and X (2-4 GHz, 4-8 GHz, and 8-12 GHz) microwave frequency bands. The resonant surface, having ~1/4 of the size of a standard A4 paper, was able to steer a beam of scattered waves from each resonator by ~25°. Under a strain of 22%, the resonant frequency of the wired co-planar resonator was shifted by 400 MHz, while the reflection coefficient changed by 158%. Deforming the geometry impacted the spectral response of the components across three arbitrary frequencies in the 4-10 GHz frequency range. With this proof of concept, we anticipate implementing thin films of MXenes on technologically relevant substrates, achieving multi-functionality through cost-effective and straightforward manufacturing.

Perfect vortex beams generation based on reflective geometric phase metasurfaces

Perfect vortex beam (PVB) is a propagating light field with radial intensity distribution independent of topological charge and carrying orbital angular momentum (OAM). PVBs can be generated through the Fourier transformation of a Bessel-Gaussian (BG) beam, which traditionally requires a precisely aligned optical setup consisting of a spiral phase plate, a conical lens, and a Fourier lens. However, such traditional schemes are usually bulky and unstable. Here, we have utilized a method that differs from conventional approaches, employing metasurfaces designed as planar Pancharatnam-Berry (PB) phase elements to substitute for all the required components. Unlike traditional methods based on reflective or refractive elements, metasurface elements can significantly reduce the system's footprint. Because the use of metallic metasurfaces allows for a more flattened design plane, in this paper, we have demonstrated the generation of PVB within the 8 GHz microwave frequency band based on a single-layer metallic metasurface. The metasurface is composed of a square ring metal structure, which can serve as a half wave plate to provide the required geometric phase distribution for incident circularly polarized light to generate PVB. By rigorously optimizing the parameters of the square-ring structures, we have generated vortex beams carrying OAM with different topological charges. These vortex beams exhibit a constant radial intensity distribution, which validates their "perfect" characteristics. In addition, we also extracted the mode purity of different vortex beams, so that the mode states of different vortex beams can be distinguished. These results provide broader value for the application of perfect vortex beams in communication.

Quadrupole mode plasmon resonance enabled dual-band metamaterial for refractive index sensing application

In this paper, design and fabrication of a dual-band near-zero index metamaterial (MTM) structure using copper on an epoxy resin fiber (FR-4) dielectric substrate is reported for refractive index sensing applications. The primary objective is to achieve dual-band operation spanning a 1–15 GHz frequency range, with a specific focus on achieving a broad bandwidth in the C-band. The resonance of the MTM structure was ascribed to the coupling of plane electromagnetic waves with surface plasmon polaritons on the structure, resulting in a quadrupole plasmon resonance mode. Furthermore, transmission characteristics of the fabricated MTM structure were experimentally measured and found to align closely with the simulated results obtained through the finite element method in COMSOL Multiphysics. The designed MTM structure demonstrates negative and near-zero permittivity at resonance frequencies, enabling left-handed and near-zero index behavior in dual microwave frequency bands. Under room temperature conditions, the MTM sensor exhibited sensitivities of 1 GHz/RIU and 3 GHz/RIU at resonance frequencies of 2.7 and 7.3 GHz, respectively. Consequently, the MTM structure exhibits significant potential for diverse applications, serving as a valuable component in sensors, detectors, and optoelectronic devices operating in the GHz region.

Electronically controlled left-handed metamaterial based on memristor/ferrite multilayer at microwaves

The paper focuses on exploring the left-handed microwave properties of a double negative metamaterial formed by utilizing elements from two natural materials: (a) thin-layer ferrite, which exhibits effective negative permeability, and (b) thin-layer TiO2 (memristor), which exhibits effective negative permittivity. Both of these natural materials possess negative constitutive parameters within the frequency band where they exhibit left-handed properties. We have defined the conditions under which a backward wave appears in the double negative frequency band. We analyze a left-handed metamaterial (LHM) for the microwave frequency band formed by a multilayer structure from the above-mentioned materials. We have theoretically demonstrated the transparency of this LHM. Furthermore, we demonstrate the ability to control the electromagnetic properties of the metamaterial. This can be achieved not only by applying both static magnetic and static electric fields but also by solely using a static electric field. The latter is one of the main advantages of this structure for technological implementation. We discuss potential applications of the designed structure as a component of microwave electronics. The capability to control various resistance states of nanoscaled TiOX with low voltage offers further control over the properties of the left-handed metamaterial.

Diamond-based HBAR as a high-pressure sensor

Features of an application of a High-overtone Bulk Acoustic Resonator (HBAR) as a high-pressure sensor have been considered. In this way, the second version of an integrated measurement system combining a Diamond Anvil Cell (DAC) and an HBAR operating in the microwave frequency band from 1.3 to 3.7 GHz was developed. A specific configuration of HBAR based on a piezoelectric layered structure as “Al/ASN/Mo/(100) diamond” was proposed. Two independent methods of pressure control were used to calibrate the embedded HBAR as a pressure sensor: a stress-induced shift of the diamond Raman line and the shift of the R1 luminescence line of Cr3+ in the ruby matrix. A stable correlation between the frequency shifts of the acoustic overtones in the HBAR, the shift of the diamond Raman line and the shift of the R1 line with a change in pressure applied to the W-gasket with embedded ruby particles was established in the range of 0 … 30 GPa. The sensitivity of an investigated sensor to the pressure variation was found to be equal 1ΔPΔff=4.8∙10-4GPa-1. The maximal value of 30 GPa obtained in a given work can be easily increased after a minor reconfiguration of the DAC. Considering the range of 0 − 5 GPa a proposed built-in DAC acoustoelectronic sensor has the better performance and sensitivity compared with known methods of a pressure measurement.

A Study on Design and Microwave Characteristics of a RF/IR Multispectral Absorber

In this paper, a design for a radio frequency(RF) and infrared(IR) absorber with metasurfaces is discussed in microwave frequency bands. The RF absorber includes double layers of metasurfaces to operate in S- and X-bands. Effects of sheet resistance of the metasurfaces and thicknesses of dielectric supporting layers on reflection responses are investigated. An IR stealth layer incorporates an array of conductive grids with slits to reflect IR signals but to transmit RF signals and visible rays. Periodicity of the grids and slits is studied for transmission responses in the X-band and a surface area ratio. Reflection responses of the RF/IR multispectral absorber are found to be lower than -10 dB and -16 dB in the S- and X-bands, respectively, from full-wave simulation. Finally, the RF/IR multispectral absorber is fabricated and its reflection responses are measured to verify designed performance.

Interlayer coupled dual-layer metagratings for broadband and high-efficiency anomalous reflection

Recent progress in metagratings highlights the promise of high-performance wavefront engineering devices, notably for their exterior capability to steer beams with near-unitary efficiency. However, the narrow operating bandwidth of conventional metagratings remains a significant limitation. Here, we propose and experimentally demonstrate a dual-layer metagrating, incorporating enhanced interlayer couplings to realize high-efficiency and broadband anomalous reflection within the microwave frequency band. The metagrating facilitated by both intralayer and interlayer couplings is designed through the combination of eigenmode expansion (EME) algorithm and particle swarm optimization (PSO) to significantly streamline the computational process. Our metagrating demonstrates the capacity to reroute a normally incident wave to +1 order diffraction direction across a broad spectrum, achieving an average efficiency approximately 90% within the 14.7 to 18 GHz range. This study may pave the way for future applications in sophisticated beam manipulations, including spatial dispersive devices, by harnessing the intricate dynamics of multi-layer metagratings with complex interlayer and intralayer interactions.

Optically transparent meta-window for satellite signal reception

Glass window, as a widely used functional unit in architecture and transportation, is a visual bridge connecting the indoor and outdoor world, and also a wireless communication window that is easily overlooked. In order to explore additional possibilities of glass window in the field of wireless communication, we propose to use meta-windows combining traditional window glass with metasurface to manipulate electromagnetic waves in microwave frequency band while ensuring its good optical transparency. Here, the meta-window is constructed by rotated meta-atoms made of fine copper wires printed on glasses to minimize the loss of optical transparency. As a proof of concept, we design and fabricate an optically transparent focusing meta-window for receiving satellite signals. In the experiment of television reception from the ChinaSat 9 satellite, stable high-definition video reception has been verified. The meta-windows endow traditional glass windows with new capabilities in electromagnetic modulations, which may be applied in 5G/6G communications, satellite ground integrations, and smart cities.

Influence of growth temperature on the magnetization dynamics of sputtered CoFeB thin films on various substrates and their microwave device functionality

In the present investigation, sputtering growth of 100 nm thick Co40Fe40B20 (CoFeB) film has been investigated in a low temperature range from room temperature (RT) to 400 ℃ on silicon (Si), silicon dioxide (Si/SiO2), and sapphire (Al2O3) substrates. The film surface morphology, static and dynamic magnetization were measured as a function of growth temperature and substrate. The grown films were further tested as a potential material for microwave device functionality in terms of filter and phase shifter. Surface roughness was lowest for the film grown on Si/SiO2 substrate at 200 ℃ (0.39 nm) measured from atomic force microscopy. Static magnetic properties measured by tracing magnetic hysteresis loop suggest a soft magnetic behaviour with in-plane magnetic anisotropy. Film saturation magnetization increases with the increase in growth temperature up to 200 ℃ and then decreases from 200 ℃ to 400 ℃. This suggest that the sputtering growth from room temperature to 200 ℃ offer a moderate to low interfacial stress resulting in low defects density. Gilbert damping constant (αeff) of the thin film is obtained from the ferromagnetic resonance measurements in a broad band of microwave frequencies. Damping was lowest (5.4×10−3) in the film grown at 200 ℃ on the Si/SiO2 substrate which correlates with the roughness and magnetization data. A low value of αeff is desirable for a material to be used in energy efficient spintronics and magnonic applications. The CoFeB films were also utilized in prototype microwave band-stop filter and phase shifter device applications. The filter has been tested in the frequency range from 6GHz to 25GHz with an applied magnetic bias up to 4.0 kOe. The frequency tunability with respect to the applied magnetic bias measured to be around 3.64 GHz/kOe. The maximum attenuation of −4dB was observed for the film grown on Si/SiO2 substrate at 200 ℃. Whereas, phase shifter fabricated on Si/SiO2/CoFeB film grown at 200 ℃ shows a differential phase shift up to 75°/cm. These results indicates that the CoFeB film deposited at low growth temperature can be a potential material in spintronics and CMOS applications where low temperatures are required for device fabrications.

Advancements in Tunable and Multifunctional Metamaterial Absorbers: A Comprehensive Review of Microwave to Terahertz Frequency Range

Abstract Over the past two decades, metamaterial absorbers have undergone significant advancements, evolving from microwave single-frequency designs to multi-frequency and broadband absorption, extending into the terahertz band. These absorbers have transitioned from unadjustable to adjustable and multifunctional configurations, enabled by the integration of adjustable materials, mechanical structures, and semiconductor devices. This article provides a comprehensive review of the progress achieved in the microwave to terahertz frequency range over the last five years. Key aspects covered include the absorbing mechanism of metamaterials in the microwave frequency band, with absorption efficiencies exceeding 90% for specific frequency ranges. The development of adjustable absorbers allows for frequency tunability within ±10% of the central frequency, while multifunctional absorbers enable concurrent control over absorption and reflection properties. In the terahertz regime, advanced electromagnetic simulations have led to absorber designs with bandwidths exceeding 50% of the central frequency, resulting in absorption efficiencies above 80% over the entire bandwidth. Integration of gallium nitride-based Gallium Nitride High Electron Mobility Transistors (GaN HMET) provides fast switching speeds below 100 nanoseconds, facilitating rapid reconfiguration of absorber functionalities. These advancements in metamaterial absorbers offer promising prospects for intelligent and integrated designs in future applications.

An overview on Modulated Scattering Sensors and their applications

Modulated scattering sensors are based on the scattering properties of small antennas. They operate similarly to radio frequency identifier RFIDs but they don't require a radio front-end, and with respect to RFIDs, which are characterized by a limited operative range, MST sensors can theoretically reach any distance up to kilometres. The information is carried on by modulating an impinging/interrogating electromagnetic wave by properly change the load impedance of the antenna sensor, with suitable resistive loads and electronic switches. MST sensors can also operate at microwave frequency bands thanks to the introduction of suitable MEMs switches able to operate up to 100 GHz, moreover they are simple, low invasive and very cheap. In this work the evolution and some recent advancements in the development and application of MST sensors at different engineering scenarios will be reported and commented.

Estimation of Heisenberg exchange interaction in rigid photoexcited chromophore-radical compound by transient EPR.

The magnetic field dependence of the spin polarization in a photoexcited rigid chromophore-radical conjugate is theoretically investigated. The excitation of the chromophore-radical conjugate often populates the metastable doublet and quartet states formed by the interactions of the unpaired electrons of the triplet chromophore and the radical. The intensities of the +1/2 ↔ - 1/2 transitions of the doublet and quartet manifolds are sensitive to the ratio jω = 3J/ω0 between the triplet-doublet exchange interaction J and the Zeeman energy ω0. It is shown that the analytical expressions of these intensities previously found for the triplet mechanism of the initial spin polarization can be expanded and applied to a broader class of compounds that may have other intersystem crossing pathways of the depopulation of the excited singlet state of the chromophore. It is also shown that the exchange interaction can be evaluated not only by comparing the electron paramagnetic resonance spectra obtained in different microwave frequency bands but also by comparing the data obtained in the same microwave band but with a shift of the frequency of the resonator. The results obtained broaden the potential applications of the previously proposed approach for analyzing the correlation between the exchange coupling and the distance separating the radical and the chromophore spins, as well as the structure of the bridge connecting their fragments.

Composite Functional Metasurface with Microwave Absorption and Vibrational Energy Harvesting

AbstractThis paper designs and validates a composite functional metasurface that combines microwave absorption and vibrational energy harvesting. The metasurface is composed of an indium tin oxide (ITO) electrically conductive glass pattern layer, arrays of 1‐ethyl‐3‐methylimidazolium dicyanamide [EMIM][N(CN)2] droplets, and an underlying indium tin oxide (ITO) electrically conductive glass layer. The composite functional metasurface possesses broadband absorption performance when the microwave frequency bands are between 7.34 and 22.63 GHz, which can transform vibration energy into electrical energy simultaneously. The relationship between output power, the number of droplets, internal resistance, and the matching load of the composite functional metasurface is deeply studied. It is found that the internal resistance decreases with the increase in the number of droplet arrays. The effective output power reaches up to 125nW when there are 48 droplet arrays. This technology has promising applications in the field of intelligent and portable electromagnetic devices.

A dual-port, single-fed, integrated microwave and mm-wave MIMO antenna system with parasitic decoupling mechanism for 5G-enabled IoT applications

The integration of microwave and mm-wave antenna is recognized as a promising solution to ensure backward compatibility while effectively utilizing available space for 5G-enabled modern IoT devices. This paper proposed a very compact size multi-band dual-port MIMO antenna module, aiming to provide complete coverage in microwave frequency bands, including 2.4 GHz, 3.5 GHz, 5.3 GHz, and 7.5 GHz, along with 5G mm-wave bands such as 28 GHz. This is achieved through a common feedline by incorporating a semi-circular slotted monopole with strategically positioned quarter-wavelength metallic stubs on a partial ground plane. The proposed antenna exhibited -10 dB impedance bandwidths of 22.6% (2.16–2.71 GHz), 17.9% (3.36–4.02 GHz), 9.4% (5.18–5.69 GHz), 15.9% (7.29–8.55 GHz), and 15.5% (26.02–30.39 GHz) across diverse frequency bands. To attain compactness and high isolation capabilities, a composite three-dimensional parasitic element is employed as a decoupling structure to alleviate significant interference among closely positioned radiating elements. The proposed antenna provides radiation efficiency of > 85%, achieving necessary peak gains of 2.32 dBi, 3.46 dBi, 4.15 dBi, and 5.32 dBi at respective microwave frequencies. While in mm-wave frequency bands, radiation efficiency exceeds 95% having a measured realized gain of 6.2 dBi at 28 GHz. The proposed design successfully maintains an average isolation of > 28 dB in all frequency bands. The suggested MIMO configuration demonstrates outstanding diversity performance, which is evidenced by ECC, DG, MEG, CCL, and TARC.