Antibacterial Efficiency Research Articles

A New Nanoplatform Under NIR Released ROS Enhanced Photodynamic Therapy and Low Temperature Photothermal Therapy for Antibacterial and Wound Repair.

Skin injury, often caused by physical or medical mishaps, presents a significant challenge as wound healing is critical to restore skin integrity and tissue function. However, external factors such as infection and inflammation can hinder wound healing, highlighting the importance of developing biomaterials with antibiotic and wound healing properties to treat infections and inflammation. In this study, a novel photothermal nanomaterial (MMPI) was synthesized for infected wound healing by loading indocyanine green (ICG) on magnesium-incorporated mesoporous bioactive glass (Mg-MBG) and coating its surface with polydopamine (PDA). In this study, Mg-MBG and MMPI was synthesized via the sol-gel method and characterized it using various techniques such as scanning electron microscopy (SEM), the energy dispersive X-ray spectrometry (EDS) system and X-ray diffraction (XRD). The cytocompatibility of MMPI was evaluated by confocal laser scanning microscopy (CLSM), CCK8 assay, live/dead staining and F-actin staining of the cytoskeleton. The antibacterial efficiency was assessed using bacterial dead-acting staining, spread plate method (SPM) and TEM. The impact of MMPI on macrophage polarization was initially evaluated through flow cytometry, qPCR and ELISA. Additionally, an in vivo experiment was performed on a mouse model with skin excision infected. Histological analysis and RNA-seq analysis were utilized to analyze the in vivo wound healing and immunomodulation effect. Collectively, the new photothermal and photodynamic nanomaterial (MMPI) can achieve low-temperature antibacterial activity while accelerating wound healing, holds broad application prospects.

An injectable hydrogel based on sodium alginate and gelatin treats bacterial keratitis through multimodal antibacterial strategy

Bacterial keratitis is among the most prevalent causes of blindness. Currently, the abuse of antibiotics in clinical settings not only lacks bactericidal effects but also readily induces bacterial resistance, making the clinical treatment of bacterial keratitis a significant challenge. In this study, we present an injectable hydrogel (GS-PNH-FF@CuS/MnS) containing self-assembled diphenylalanine dipeptide (FF) and CuS/MnS nanocomposites (CuS/MnS NCs) that destroy bacterial cell walls through a synergistic combination of mild photothermal therapy (PTT), chemodynamic therapy (CDT), ion release chemotherapy, and self-assembled dipeptide contact, thereby eliminating Pseudomonas aeruginosa. Under 808 nm laser irradiation, the bactericidal efficiency of GS-PNH-FF@CuS/MnS hydrogel against P. aeruginosa in vitro reach up to 96.97 %. Furthermore, GS-PNH-FF@CuS/MnS hydrogel is applied topically to kill bacteria, reduce inflammation, and promote wound healing. Hematoxylin-eosin (H&E) staining, Masson staining, immunohistochemistry and immunofluorescence staining are used to evaluate the therapeutic effect on infected rabbit cornea models in vivo. The GS-PNH-FF@CuS/MnS demonstrate good biocompatibility with human corneal epithelial cells and exhibit no obvious eyes side effects. In conclusion, the GS-PNH-FF@CuS/MnS hydrogel in this study provides an effective and safe treatment strategy for bacterial keratitis through a multimodal approach.

Escherichia coli exopolysaccharides disrupt Pseudomonas aeruginosa biofilm and increase its antibiotic susceptibility

Pseudomonas aeruginosa (P. aeruginosa) is a major pathogen that causes infectious diseases. It has high tendency to form biofilms, resulting in the failure of traditional antibiotic therapies. Inspired by the phenomenon that co-culture of Escherichia coli (E. coli) and P. aeruginosa leads to a biofilm reduction, we reveal that E. coli exopolysaccharides (EPS) can disrupt P. aeruginosa biofilm and increase its antibiotic susceptibility. The results show that E. coli EPS effectively inhibit biofilm formation and disrupt mature biofilms in P. aeruginosa, Staphylococcus aureus, and E. coli itself. The maximal inhibition and disruption rates against P. aeruginosa biofilm are 40 % and 47 %, respectively. Based on the biofilm-disrupting ability of E. coli EPS, we develop an E. coli EPS/antibiotic combining strategy for the treatment of P. aeruginosa biofilms. The combination with E. coli EPS increases the antibacterial efficiency of tobramycin against P. aeruginosa biofilms in vitro and in vivo. This study provides a promising strategy for treating biofilm infections. Statement of significanceBiofilm formation is a leading cause of chronic infections. It blocks antibiotics, increases antibiotic-tolerance, and aids in immune evasion, thus representing a great challenge in clinic. This study proposes a promising approach to combat pathogenic Pseudomonas aeruginosa (P. aeruginosa) biofilms by combining Escherichia coli exopolysaccharides with antibiotics. This strategy shows high efficiency in different P. aeruginosa stains, including two laboratory strains, PAO1 and ATCC 10145, as well as a clinically acquired carbapenem-resistant strain. In addition, in vivo experiments have shown that this approach is effective against implanted P. aeruginosa biofilms and can prevent systemic inflammation in mice. This strategy offers new possibilities to address the clinical failure of conventional antibiotic therapies for microbial biofilms.

Antibacterial efficacy of decorated carbon nanotubes by nano silver against pseudomonas aeruginosa

Carbon nanotubes (CNTs) are considered as a promising nanomaterial for a variety of applications. It has desirable physicochemical characteristics of high surface area, superior mechanical and thermal strength, and electrochemical activity. In this study, CNTs decorated with silver nanoparticles (AgNPs) were manufactured by an arc discharge technique. As a result, etching produces stable AgNPs-CNTs aqueous suspensions of pure silver and carbon electrodes in ethanol vapor condensed in water. UV- visible photometer, x-ray Diffraction, transmission electron microscope, and energy dispersive x-ray characterized the synthesized AgNPs-CNTs. The synthesized AgNPs-CNTs crystals showed CNTs formation of an average 9.5 nm, with intermediate length position of about 75.8 nm decorated by homogeneous spherical AgNPs of average size 15.2 nm. The antibacterial efficiency of AgNPs-CNTs against Pseudomonas aeruginosa was established at a series of concentrations (45 g ml−1: 0.0879 g ml−1) while values for the MIC and MBC were determined. The MIC and MBC levels were found to be (>5.625 μg ml−1) and (>11.25 μg/ml) respectively. The bacteria cytotoxicity was evaluated through LDH and protein leakage levels. Treated samples with 3.2 μg ml−1 AgNPs-CNTs revealed significant injuries in the cell membrane by two times greater in LDH and protein leakage levels than samples treated by 5.0 μg ml−1 AgNPs. Results in this work substantiate the synergistic effect of combining AgNPs with CNTs to enhanced antibacterial properties and performance compared to AgNPs alone. The efficiency of using synthesized AgNPs-CNTs showed high antibacterial potential against Pseudomonas aeruginosa in a concentration-dependent manner. The arc discharge method can be adapted to incorporate different materials or change the synthesis conditions, allowing for the production of AgNPs-CNTs with tailored properties for specific applications.

Evaluation of Antimicrobial Efficiency, Shear Bond Strength, and Adhesive Remnant Index of TiO2 Infiltrated Orthodontic Adhesive - An In Vitro Study.

Enamel demineralization is an unavoidable adverse effect encountered with bonding brackets in orthodontic therapy. Introducing nanoparticles into the composite adhesive paste can prevent enamel demineralization. Titanium dioxide (TiO2) is known to exhibit direct antimicrobial efficiency. This study aimed to assess the antibacterial efficiency and shear bond strength (SBS) of an orthodontic bonding composite infiltrated with TiO2 nanoparticles. This in vitro study evaluated the efficiency of TiO2 nanoparticle-incorporated light-curing orthodontic composite paste (ENLIGHT, ORMCO). Twenty extracted premolars were randomly and equally allocated to the two study groups, N = 10. While a conventional composite was utilized for the bonding brackets in Group I, a TiO2-incorporated composite was used in Group 2. The adhesive remnant index (ARI) scores given by Artun and Bergland et al. and SBS were determined. Furthermore, the antimicrobial efficiency was estimated using the minimum inhibitory concentration (MIC)/minimum bactericidal concentration (MBC) and agar well diffusion assay for six composite disc specimens. The results were statistically analyzed using the chi-square test and Student's t test, at P < 0.05. After 24 h of curing, no statistical mean difference was observed between the two groups in terms of ARI or SBS scores (P > 0.05). However, there was a significant increase in the antimicrobial efficiency of Group II when compared with Group I (P < 0.05). TiO2 nanoparticle-incorporated orthodontic composites improve the antimicrobial efficiency with no significant change in the SBS. The ARI scores indicate the presence of 50% remnant orthodontic composite on the tooth enamel surface post debonding.

Formulation of silver-loaded zeolitic imidazole framework-67 and its antibacterial coating on titanium surface for bioimplant applications

Artificial bioimplant infections caused by bacteria have been a persistent problem that requires re-surgery and is harmful to human tissue. A facile, inexpensive and stable antibacterial agent coating can be a significant alternative. The present study attempted to construct titanium (Ti) implant coated with silver loaded zeolitic imidazole framework (ZIF)-67 (Ag@ZIF-67)-chitosan composite through a casting technique. The as-prepared nanocomposite and its coating were subjected to various characterization techniques, including XPS, XRD, SEM, and TEM to understand the material properties. Antibacterial activity was assessed through a standard spread-plate method, and the cytocompatibility of the fabricated materials was examined upon the skin fibroblast (L929) cell line. Corrosion studies were performed by using anodic polarization and impedance methods. The bactericidal efficacy of the coating was validated in vivo by utilizing a subcutaneous mouse model. The nanocomposite and coating exhibited a significant antibacterial efficiency of above 95 % against S. aureus and E. coli as the combined release of Co2+ and Ag+ ions entailed cellular membrane disintegration. The Ag@ZIF-67 composite revealed negligible cytotoxicity and its coating exhibited strong bone cell attachment. In contrast to pure Ti surface, the Ag@ZIF-67-chitosan coated Ti exhibited a minor reduction in corrosion resistance and modifications to its passivation properties as a result of the formation of a galvanic cell. A remarkable antibacterial effect was evinced through the in vivo experiments demonstrating a complete disinfection with 99 % of S. aureus lysis with no bacterial growth in the nearby healthy tissues. In conclusion, the current results demonstrated that the fabricated Ag@ZIF-67 could be applied as an antibacterial coating material of Ti for bioimplant applications.

Greenly engineered bimetallic Ag-ZnO nanohybrids for synergistic antibacterial enhancement

The escalating issue of infectious agents developing resistance to traditional antibiotics has spurred ongoing research into effective and broad-spectrum antimicrobial solutions. This study focuses on the fabrication of silver-zinc oxide Nanohybrids (A-ZnO-NHs) with varying silver content (1 %, 3 %, 5 %) using a simplified modified sol–gel method, further enhanced by a green synthesis approach utilizing orange peel extract for the generation of silver nanoparticles. The physicochemical characteristics of the A-ZnO-NCs were thoroughly examined. X-ray diffraction analysis verified the presence of Ag nanoparticles within the zinc oxide and scanning electron microscopy revealed the nanoscale silver particles uniformly distributed on the spherical zinc oxide nanoparticles. Transmission electron microscopy indicated that the Ag-ZnO-NCHs ranged in size from 10 to 20 nm. X-ray photoelectron spectroscopy analysis confirmed the formation of strong chemical bonds between the silver and zinc oxide surfaces in the nanohybrids. This study explored into the structural, morphological, and antimicrobial characteristics of the A-ZnO-NHs at different compositions. The bactericidal efficiency of the A-ZnO-NHs was assessed against both gram-positive and gram-negative bacterial strains. The impact of the A-ZnO-NHs on the cellular structure and chemical composition of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) was also explored. The findings revealed that the A-ZnO-NHs with 3 % silver content demonstrated higher antimicrobial activity against E. coli and S. aureus compared to other compositions and pure zinc oxide nanoparticles. The antimicrobial activity decreases when the concentration of silver increases because the silver particles agglomerate together, reducing their surface area and lessening their effectiveness as antibacterial agents, despite their potential for various applications.

A Label-Free Optical Flow Cytometry Based-Method for Rapid Assay of Disinfectants' Bactericidal Activity.

Selecting the appropriate disinfectant to control and prevent healthcare-associated infections (HAIs) is a challenging task for environmental health experts due to the large number of available disinfectant products. This study aimed to develop a label-free flow cytometry (FCM) method for the rapid evaluation of bactericidal activity and to compare its efficacy with that of standard qualitative/quantitative suspension tests. The bactericidal efficiency of eight commercial disinfectants containing quaternary ammonium compounds (QACs) was evaluated against four strains recommended by EN 13727 (Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Enterococcus hirae) and four multidrug-resistant pathogens. The proposed FCM protocol measures changes in scattered light and counts following disinfectant exposure, neutralization, and culture steps. Unlike other available FCM-based methods, this approach does not rely on autofluorescence measurements, impedance cytometry, or fluorescent dyes. The FCM scattered light signals revealed both decreased count rates and morphological changes after treatment with minimum inhibitory concentrations (MICs) and higher concentrations for all tested bacteria. The results from the FCM measurements showed excellent correlation with those from standard assays, providing a rapid tool for monitoring the susceptibility profile of clinical, multidrug-resistant pathogens to chemical disinfectants, which could support infection prevention and control procedures for healthcare environments. This label-free FCM protocol offers a novel and rapid tool for environmental health experts, aiding in the optimization of disinfectant selection for the prevention and control of HAIs.

New Zein Protein Composites with High Performance in Phosphate Removal, Intrinsic Antibacterial, and Drug Delivery Capabilities.

Herein, poly(N-(4-aminophenyl)methacrylamide)-carbon nano-onions [abbreviated as PAPMA-CNOs (f-CNOs)] integrated gallic acid cross-linked zein composite fibers (ZG/f-CNOs) were developed for the removal/recovery of phosphate from wastewater along with controlled drug delivery and intrinsic antibacterial characteristics. The composite fibers were produced by Forcespinning followed by a heat-pressure technique. The obtained ZG/f-CNOs composite fibers presented several favorable characteristics of nanoadsorbents and drug carriers. The composite fibers exhibited excellent adsorption capabilities for phosphate ions. The adsorption assessment demonstrated that composite fibers process highly selective sequestration of phosphate ions from polluted water, even in the presence of competing anions. The ZG/f-CNOs composite fibers presented a maximum phosphate adsorption capacity (qmax) of 2500 mg/g at pH 7.0. This represents the most efficient phosphate adsorption system among all of the reported nanocomposites to date. The isotherm studies and adsorption kinetics of the adsorbent showed that the adsorption experiments followed the pseudo-second-order and Langmuir isotherm model (R2 = 0.9999). After 13 adsorption/desorption cycles, the adsorbent could still maintain its adsorption efficiency of 96-98% at pH 7.0 while maintaining stability under thermal and chemical conditions. The results mark significant progress in the design of composite fibers for removing phosphates from wastewater, potentially aiding in alleviating eutrophication effects. Owing to the f-CNOs incorporation, ZG/f-CNOs composite fibers exhibited controlled drug delivery. An antibiotic azithromycin drug-encapsulated composite fibers presented a pH-mediated drug release in a controlled manner over 18 days. Furthermore, the composite fibers displayed excellent antibacterial efficiency against Gram-positive and Gram-negative bacteria without causing resistance. In addition, zein composite fibers showed augmented mechanical properties due to the presence of f-CNOs within the zein matrix. Nonetheless, the robust zein composite fibers with inherent stimuli-responsive drug delivery, antibacterial properties, and phosphate adsorption properties can be considered promising multifunctional composites for biomedical applications and environmental remediation.

Precise antibiotic delivery to the lung infection microenvironment boosts the treatment of pneumonia with decreased gut dysbiosis

Bacterial pneumonia is a common disease with significant health risks. However, the overuse antibiotics in clinics face challenges such as inadequate targeting and limited drug utilization, leading to drug resistance and gut dysbiosis. Herein, a dual-responsive lung inflammatory tissue targeted nanoparticle (LITTN), designed for targeting lung tissue and bacteria, is screened from a series of prepared nanoparticles consisting of permanent cationic lipids, acid-responsive lipids, and reactive oxygen species-responsive and phenylboronic acid-modified lipids with different surface properties. Such nanoparticle is further verified to enhance the adsorption of vitronectin in serum. Additionally, the optimized nanoparticle exhibits more positive charge and coordination of boric acid with cis-diol in the infected microenvironment, facilitating electrostatic interactions with bacteria and biofilm penetration. Importantly, the antibacterial efficiency of dual-responsive rifampicin-loaded LITTN (Rif@LITTN) against methicillin-resistant staphylococcus aureus is 10 times higher than that of free rifampicin. In a mouse model of bacterial pneumonia, the intravenous administration of Rif@LITTN could precisely target the lungs, localize in the lung infection microenvironment, and trigger the responsive release of rifampicin, thereby effectively alleviating lung inflammation and reducing damage. Notably, the targeted delivery of rifampicin helps protect against antibiotic-induced changes in the gut microbiota. This study establishes a new strategy for precise delivery to the lung-infected microenvironment, promoting treatment efficacy while minimizing the impact on gut microbiota. Statement of significanceIntravenous antibiotics play a critical role in clinical care, particularly for severe bacterial pneumonia. However, the inability of antibiotics to reach target tissues causes serious side effects, including liver and kidney damage and intestinal dysbiosis. Therefore, achieving precise delivery of antibiotics is of great significance. In this study, we developed a novel lung inflammatory tissue-targeted nanoparticle that could target lung tissue after intravenous administration and then target the inflammatory microenvironment to trigger dual-responsive antibiotics release to synergistically treat pneumonia while maintaining the balance of gut microbiota and reducing the adverse effects of antibiotics. This study provides new ideas for targeted drug delivery and reference for clinical treatment of pneumonia.

Joint Exfoliation of MXene by Dimensional Mismatched SiC/ZIF-67 Toward Multifunctional Flame Retardant Thermoplastic Polyurethane.

The single-layer MXene fully demonstrates the advantages of 2D materials, especially catalytic, conductive, and mechanical properties. However, the high energy consumption and low efficiency faced by MXene in the divestiture process are still challenges that need to be solved urgently. In this article, dimension mismatch and collaborative stripping strategies are skillfully combined to easily realize the transformation from multi-layer MXene to single layer. In addition, the functionalized MXene@SiC@polyaniline (MXene@SiC@PANI) nano-hybrid materials are used as fillers to improve the thermal conductivity, flame retardant, and antibacterial properties of thermoplastic polyurethane (TPU). The surface temperature of TPU/MXene@SiC@PANI composites increased from 33.4°C to 59.8°C within 10 s. In addition, the antibacterial efficiency of TPU composites against Escherichia coli and Staphylococcus aureus is 69.6% and 88.9%, respectively. Compared with pure TPU, the peak heat release rate and total heat release are reduced by 71.4% and 34.6%, respectively. The flame-retardant mechanism of MXene hybrid materials is systematically discussed. It is worth noting that the introduction of PANI enhances the compatibility between the filler and the polymer, effectively maintaining the mechanical properties of the TPU itself. This work provides a convenient method for the multi-functional practical application of TPU.

Research Progress on Ti3C2Tx-Based Composite Materials in Antibacterial Field.

The integration of two-dimensional Ti3C2Tx nanosheets and other materials offers broader application options in the antibacterial field. Ti3C2Tx-based composites demonstrate synergistic physical, chemical, and photodynamic antibacterial activity. In this review, we aim to explore the potential of Ti3C2Tx-based composites in the fabrication of an antibiotic-free antibacterial agent with a focus on their systematic classification, manufacturing technology, and application potential. We investigate various components of Ti3C2Tx-based composites, such as metals, metal oxides, metal sulfides, organic frameworks, photosensitizers, etc. We also summarize the fabrication techniques used for preparing Ti3C2Tx-based composites, including solution mixing, chemical synthesis, layer-by-layer self-assembly, electrostatic assembly, and three-dimensional (3D) printing. The most recent developments in antibacterial application are also thoroughly discussed, with special attention to the medical, water treatment, food preservation, flexible textile, and industrial sectors. Ultimately, the future directions and opportunities are delineated, underscoring the focus of further research, such as elucidating microscopic mechanisms, achieving a balance between biocompatibility and antibacterial efficiency, and investigating effective, eco-friendly synthesis techniques combined with intelligent technology. A survey of the literature provides a comprehensive overview of the state-of-the-art developments in Ti3C2Tx-based composites and their potential applications in various fields. This comprehensive review covers the variety, preparation methods, and applications of Ti3C2Tx-based composites, drawing upon a total of 171 English-language references. Notably, 155 of these references are from the past five years, indicating significant recent progress and interest in this research area.

Equisetum arvense and nano zinc oxide‐infused polycaprolactone scaffolds: A multifaceted approach for antibacterial, antioxidant, and hemocompatible wound dressing

AbstractAn appropriate skin tissue‐engineered scaffold can act promptly to combat microbial infection and preserve the wound throughout all phases of healing. To achieve sufficient healing, scaffolds should also promote cell proliferation and regeneration. Therefore, it has become essential to develop skin tissue engineering scaffolds that mimic the extracellular matrices of the skin, provide a high porosity scaffold structure, and act as an antimicrobial protection during wound healing. In this study, the polycaprolactone (PCL) electrospun scaffold was modified with optimal amounts of zinc oxide nanoparticles (ZnO) and Equisetum arvense (EA) herbal extract for potential application as antibacterial and wound healing scaffolds. Full characterization was carried out for fabricated scaffolds before in‐vitro assessments. FTIR spectroscopy and SEM images verified the successful substitution of nanofibers with EA and ZnO. These substitutions increased the hydrophilicity compared to the PCL scaffold. According to the results, the PCL/ZnO/EA fabricated scaffold was hemocompatible and non‐cytotoxic, in addition to allowing proper cell attachment. Effective antibacterial efficiency against Gram‐positive and Gram‐negative bacteria was also observed in this sample. Finally, the in vitro wound healing assay indicated that the addition of ZnO and EA improves the wound healing capacity of the scaffolds. The results indicate the potential of the developed scaffolds to prevent wound contamination and the complications of chronic infection.Highlights Optimal concentrations of zinc oxide nanoparticles (ZnO) and Equisetum arvense (EA) were incorporated into electrospun polycaprolactone (PCL) nanofibers for potential wound dressing applications. The fabricated nanofibrous wound dressings offer a multitude of structural features in biomaterials. PCL fibers enable the controlled release of both ZnO and EA. The fabricated scaffolds exhibit favorable antibacterial, and antioxidant properties while maintaining biocompatibility and hemocompatibility.

Development of a mechanically robust silicon-based cross-linking polymer for the sustainable marine antifouling coatings

Silicone-based fouling release coatings (FRCs) have shown great promise as an environmentally friendly antifouling technology, while inferior mechanical properties and insufficient substrate adhesion have hindered their further application. We focused on enhancing the mechanical robustness of silicone-based coating through the synergistic effects of hydrogen bonding, π-π aromatic interaction and covalent bonding. The resulting silicone-based coating displayed a low surface energy of 23 mJ/m2 and improved mechanical strength and substrate adhesion, offering values up to 6.4 MPa (9.1 times higher) and 2.87 MPa (25.7 times higher), respectively. Additionally, the modified coating demonstrated a tear strength of 9.8 kN/m and mass loss only about 30 mg after enduring 10,000 wear cycles. Alkoxysilane-functionalized polyethylene glycol and quaternary ammonium salt were grafted into the cross-linking structure to make them anchored to the networks and migrated to the surface layer in seawater without releasing. The coating provided 99.1% antibacterial efficiency and effective antidiatom performance (≤ 11.2 cell/mm2). After a 12-month marine field test, the developed film showed only 20% micro bio-fouling compared to 100% fouling coverage on the PDMS surface. By combining improved mechanical properties with antifouling characteristics, this new multifunctional silicone-based FRC exhibits tremendous potential for sustainable marine antifouling coating application.

An “intelligent-sensing and targeted release” antimicrobial pickering emulsion for banana preservation

Conventional Pickering emulsions can kill microorganisms by slow release of active substances to prevent foodborne contamination; however, their low bactericidal efficiency due to the absence of bacterial inducibility is a problem that needs to be addressed. Inspired by the fact that the growth of bacteria depends on the consumption of proteins and polysaccharides by microbial enzymes, the present study prepared a novel Pickering emulsion capable of intelligent sensing and targeted release using chitosan (CS)-soy protein isolate (SPI) colloidal particles as stabilizers and plant essential oils as active substances. The Pickering emulsion demonstrated optimal performance in achieving these goals when prepared with a CS:SPI ratio of 1:4, an oil fraction of 40%, at a homogeneous speed of 25 000 rpm, and utilizing cinnamon oil as the plant essential oil. This was evidenced by the emulsion having the smallest droplet size and the greatest stability, which can increase the chances of coming into contact with microorganisms and avoid premature demulsification. Antibacterial experiments demonstrated that the emulsion could control the bacteria-mediated release of essential oils, realizing intelligent sterilization. Experiments on banana preservation showed that the released essential oils effectively delayed banana spoilage. These findings contribute to the development of intelligent food preservation systems.

A fluorine-free and high-robustness photothermal self-healing superhydrophobic coating with long-term anticorrosion and antibacterial performances

Superhydrophobic surface is a promising strategy for antibacterial and corrosion protection. However, the use of harmful fluorine-containing materials, poor mechano-chemical stability, the addition of fungicides and poor corrosion resistance often limit its practical application. In this paper, a high-robustness photothermal self-healing superhydrophobic coating is prepared by simply spraying a mixture of hydrophobically modified epoxy resin and two kinds of modified nanofillers (carbon nanotubes and SiO2) for long-term anticorrosion and antibacterial applications. Multi-scale network and lubrication structures formed by cross-linking of modified carbon nanotubes and repeatable roughness endow coating with high robustness, so that the coating maintains superhydrophobicity even after 100 Taber abrasion cycles, 20 m sandpaper abrasion and 100 tape peeling cycles. The synergistic effect of antibacterial adhesion and photothermal bactericidal activity endows coating with excellent antibacterial efficiency, which against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) separately reaches 99.6% and 99.8%. Moreover, the influence of modified epoxy resin, superhydrophobicity, organic coating and coating thicknesses on the anticorrosion of magnesium (Mg) alloy is systematically studied and analyzed. More importantly, the prepared coating still exhibits excellent self-cleaning, anticorrosion and antibacterial abilities after 20 m abrasion. Furthermore, the coating exhibits excellent adhesion (level 4B), chemical stability, UV radiation resistance, high-low temperature alternation resistance, stable heat production capacity and photothermal self-healing ability. All these excellent performances can promote its application in a wider range of fields.

The Highly Durable Antibacterial Gel-like Coatings for Textiles.

Hospital-acquired infections are considered a priority for public health systems since they pose a significant burden for society. High-touch surfaces of healthcare centers, including textiles, provide a suitable environment for pathogenic bacteria to grow, necessitating incorporating effective antibacterial agents into textiles. This paper introduces a highly durable antibacterial gel-like solution, Silver Shell™ finish, which contains chitosan-bound silver chloride microparticles. The study investigates the coating's environmental impact, health risks, and durability during repeated washing. The structure of the Silver Shell™ finish was studied using transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDX). The TEM images showed a core-shell structure, with chitosan forming a protective shell around groupings of silver microparticles. The field-emission scanning electron microscopy (FESEM) demonstrated the uniform deposition of Silver Shell™ on the surfaces of the fabrics. AATCC Test Method 100 was employed to quantitatively analyze the antibacterial properties of the fabrics coated with silver microparticles. Two types of bacteria, Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), were used in this study. The antibacterial results showed that after 75 wash cycles, a 100% reduction for both S. aureus and E. coli in the coated samples using crosslinking agents was observed. The coated samples without a crosslinking agent exhibited 99.88% and 99.81% reductions for S. aureus and E. coli after 50 washing cycles. To compare the antibacterial properties toward non-pathogenic and pathogenic strains of the same species, MG1655 model E. coli strain (ATCC 29213) and a multidrug-resistant clinical isolate were used. The results showed the antibacterial efficiency of the Silver ShellTM solution (up to 99.99% reduction) coated on cotton fabric. AATCC-147 was performed to investigate the coated samples' leaching properties and the crosslinking agent's effects against S. aureus and E. coli. All coated samples demonstrated remarkable antibacterial efficacy, even after 75 wash cycles. The crosslinking agent facilitated durable attachment between the silver microparticles and cotton substrate, minimizing the release of particles from the fabrics. Color measurements were conducted to assess the color differences resulting from the coating process. The results indicated fixation values of 44%, 32%, and 28% following 25, 50, and 75 washing cycles, respectively.

A biguanide chitosan-based hydrogel adhesive accelerates the healing of bacterial-infected wounds

The development of tissue adhesives with good biocompatibility and potent antimicrobial properties is crucial for addressing the high incidence of surgical site infections in emergency and clinical settings. Herein, an injectable hydrogel adhesive composed of chitosan biguanidine (CSG), oxidized dextran (ODex) and tannin (TA) was synthesized primarily through Schiff-base reactions, hydrogen bonding, and electrostatic interactions. TA was introduced into the CSG/ODex hydrogel to prepare a physicochemically double cross-linked hydrogel. The hydrogel formulation incorporating 2 wt% TA (CSG/ODex-TA2) exhibited rapid gelation, moderate mechanical properties, good tissue adhesion, and sustained release behavior of TA. Both in vitro and in vivo studies demonstrated that CSG/ODex-TA2 showed significantly enhanced adhesion and antibacterial effectiveness compared to the CSG/ODex hydrogel and commercial fibrin glue. Leveraging the positive charge of CSG, the CSG/ODex-TA2 hydrogel demonstrated a strong contact antibacterial effect, while the sustained release of TA provided diffusion antibacterial capabilities. By integrating contact and diffusion antibacterial mechanisms into the hydrogel, a promising approach was developed to boost antibacterial efficiency and accelerate the healing of wounds infected with methicillin-resistant Staphylococcus aureus (MRSA). The CSG/ODex-TA2 hydrogel has excellent biocompatibility, hemostatic properties, and antibacterial capabilities, making it a promising candidate for improving in vivo wound care and combating bacterial infections.

SrTiO3 Nanotube-Based "Pneumatic Nanocannon" for On-Demand Delivery of Antibacterial and Sustained Osseointegration Enhancement.

Infection and aseptic loosening caused by bacteria and poor osseointegration remain serious challenges for orthopedic implants. The advanced surface modification of implants is an effective strategy for addressing these challenges. This study presents a "pneumatic nanocannon" coating for titanium orthopedic implants to achieve on-demand release of antibacterial and sustained release of osteogenic agents. SrTiO3 nanotubes (SrNT) were constructed on the surface of Ti implants as "cannon barrel," the "cannonball" (antibiotic) and "propellant" (NH4HCO3) were codeposited into SrNT with assistance of mussel-inspired copolymerization of dopamine and subsequently sealed by a layer of polydopamine. The encapsulated NH4HCO3 within the nanotubes could be thermally decomposed into gases under near-infrared irradiation, propelling the on-demand delivery of antibiotics. This coating demonstrated significant efficacy in eliminating typical pathogenic bacteria both in planktonic and biofilm forms. Additionally, this coating exhibited a continuous release of strontium ions, which significantly enhanced the osteogenic differentiation of preosteoblasts. In an implant-associated infection rat model, this coating demonstrated substantial antibacterial efficiency (>99%) and significant promotion of osseointegration, along with alleviated postoperative inflammation. This pneumatic nanocannon coating presents a promising approach to achieving on-demand infection inhibition and sustained osseointegration enhancement for titanium orthopedic implants.

Blue fluorescent waterborne polyurethane‐based transition metal complexes with antibacterial activity

AbstractEfficient and stable blue fluorescent materials are the key components of light‐emitting devices and have received wide attention. Herein, transition metal complexes Zn(5‐AQ)2, Cu(5‐AQ)2, and Cd(5‐AQ)2 are prepared by using 5‐aminoquinoline (5‐AQ) as ligand and Zn2+, Cu2+, and Cd2+ as the central ions, respectively. Then, waterborne polyurethane (WPU)‐based transition metal complexes Zn(5‐AQ)2‐WPU, Cu(5‐AQ)2‐WPU, and Cd(5‐AQ)2‐WPU with different emission wavelengths of blue fluorescence are prepared by bonding Zn(5‐AQ)2, Cu(5‐AQ)2, and Cd(5‐AQ)2 to polyurethane chains as chain extenders, respectively. Noteworthily, with the increase of transition metal ion radius (Zn2+ &lt; Cu2+ &lt; Cd2+), the fluorescence emission wavelengths of the complexes showed different degrees of blue‐shift, and the blue‐shifted wavelengths showed a decreasing trend. Importantly, their fluorescence colors are blue‐shifted from blue‐green to blue with different emission wavelengths after accessing the polyurethane backbone, which has potential applications in the field of tuning white LED materials. The thermal decomposition temperatures of Zn(5‐AQ)2‐WPU, Cu(5‐AQ)2‐WPU, and Cd(5‐AQ)2‐WPU are above 220°C with good thermal stability, and their fluorescence lifetimes are prolonged by 8.817, 8.896, and 6.489 ns, respectively, compared with the complexes. Furthermore, WPU transition metal complexes with water as a dispersive medium have an antibacterial efficiency of up to 100% against Escherichia coli, which is an environmentally friendly antibacterial material with broad application prospects.