Azobenzene Ligands Research Articles

Azobenzene as an Effective Ligand in Europium Chemistry-A Synthetic and Theoretical Study.

The preparation and characterization of two novel europium-azobenzene complexes that demonstrate the effectiveness of this ligand for stabilizing reactive, redox-active metals are reported. With the family of rare earth metals receiving attention due to their potential as catalysts, critical components in electronic devices, and, more recently, in biomedical applications, a detailed understanding of factors contributing to their coordination chemistry is of great importance for customizing their stability and reactivity. This study introduces azobenzene as an effective nonprotic ligand system that provides novel insights into rare earth metal coordination preferences, including factors contributing to the coordinative saturation of the large, divalent europium centers. The two compounds demonstrate the impact of the solvent donors (tetrahydrofuran (THF) and dimethoxyethane (DME)) on the overall coordination chemistry of the target compounds. Apart from the side-on coordination of the doubly-reduced azobenzene and the anticipated N-N bond elongation due to decreased bond order, the two compounds demonstrate the propensity of the europium centers towards limited metal-π interactions. The target compounds are available by direct metallation in a straightforward manner with good yields and purity. The compounds demonstrate the utility of the azobenzene ligands, which may function as singly- or doubly-reduced entities in conjunction with redox-active metals. An initial exploration into the computational modeling of these and similar complexes for subsequent property prediction and optimization is performed through a methodological survey of structure reproduction using density functional theory.

Thermoplasmonic Effect Enables Indirect ON-OFF Control over the Z-E Isomerization of Azobenzene-Based Photoswitch.

Proper formulation of systems containing plasmonic and photochromic units, such as gold nanoparticles and azobenzene derivatives, yields materials and interfaces with synergic functionalities. Moreover, gold nanoparticles are known to accelerate the Z-E isomerization of azobenzene molecules in the dark. However, very little is known about the light-driven, plasmon-assisted Z-E isomerization of azobenzene compounds. Additionally, most of the azobenzene-gold hybrids are prepared with nanoparticles of small, isotropic shapes and azobenzene ligands covalently linked to the surface of nanostructures. Herein, a formulation of an innovative system combining azobenzene derivative, gold nanorods, and cellulose nanofibers is proposed. The system's structural integrity relies on electrostatic interactions among components instead of covalent linkage. Cellulose, a robust scaffold, maintains the material's functionality in water and enables monitoring of the material's plasmonic-photochromic properties upon irradiation and at elevated temperatures without gold nanorods aggregation. Experimental evidence supported by statistical analysis suggests that the optical properties of plasmonic nanometal enable indirect control over the Z-E isomerization of the photochromic component with near-infrared irradiation by triggering the thermoplasmonic effect. The proposed hybrid material's dual plasmonic-photochromic functionality, versatility, and ease of processing render a convenient starting point for further advanced azobenzene-related research and 3D printing of macroscopic light-responsive structures.

No Switching Cooperativity between Coordinated Azo Ligands on Complexes Having {MII(phosphane-κ2P)}2+ (M = Pd, Pt) Scaffolds.

A series of square-planar palladium and platinum compounds with cis-blocking phosphanes and terminal azobenzene ligands [M(dppp)(azo)2](OTf)2 (azo = CN(C6H4)-N═N-(C6H4)CN (iso-cyano), CN(C6H4)-N═N-(C6H5) (iso-Ph)) and [{M2(tpbz)}(azo)4](OTf)4 (azo = CN(C6H4)-N═N-(C6H5) (iso-Ph)) have been synthesized and fully characterized. Similarly to the uncoordinated ligands, the new coordination compounds have shown to be photochemically active with respect to their trans-to-cis isomerization process. Their cis-to-trans back spontaneous reaction have been studied as a function of solvent, temperature and pressure and the corresponding activation parameters determined in order to investigate the mechanism of these transformations. The results obtained are indicative of the operation of a rotational mechanism with no cooperativity between the azo ligands attached to the same metal. Density functional theory calculations have been carried out in order to estimate the relative energies of the different photoisomers for the theoretical interpretation of the experimental data.

NIR‐II Absorption/Fluorescence of D–A π‐Conjugated Polymers Composed of Strong Electron Acceptors Based on Boron‐Fused Azobenzene Complexes

AbstractLuminescence in the second near‐infrared (NIR‐II, 1,000–1,700 nm) window is beneficial especially for deep tissue imaging and optical sensors because of intrinsic high permeability through various media. Strong electron‐acceptors with low‐lying lowest unoccupied molecular orbital (LUMO) energy levels are a crucial unit for donor–acceptor (D–A) π‐conjugated polymers (CPs) with the NIR‐II emission property, however, limited kinds of molecular skeletons are still available. Herein, D–A CPs involving fluorinated boron‐fused azobenzene complexes (BAz) with enhanced electron‐accepting properties are reported. Combination of fluorination at the azobenzene ligand and trifluoromethylation at the boron can effectively lower the LUMO energy level down to −4.42 eV, which is much lower than those of conventional strong electron‐acceptors. The synthesized series of CPs showed excellent absorption/fluorescence property in solution over a wide NIR range including NIR‐II. Furthermore, owing to the inherent solid‐state emissive property of the BAz skeleton, obvious NIR‐II fluorescence from the film (up to λFL=1213 nm) and the nanoparticle in water (λFL=1036 nm, brightness=up to 29 cm−1 M−1) were observed, proposing that our materials are applicable for developing next‐generation of NIR‐II luminescent materials.

NIR-II Absorption/Fluorescence of D-A π-Conjugated Polymers Composed of Strong Electron Acceptors Based on Boron-Fused Azobenzene Complexes.

Luminescence in the second near-infrared (NIR-II, 1,000-1,700 nm) window is beneficial especially for deep tissue imaging and optical sensors because of intrinsic high permeability through various media. Strong electron-acceptors with low-lying lowest unoccupied molecular orbital (LUMO) energy levels are a crucial unit for donor-acceptor (D-A) π-conjugated polymers (CPs) with the NIR-II emission property, however, limited kinds of molecular skeletons are still available. Herein, D-A CPs involving fluorinated boron-fused azobenzene complexes (BAz) with enhanced electron-accepting properties are reported. Combination of fluorination at the azobenzene ligand and trifluoromethylation at the boron can effectively lower the LUMO energy level down to -4.42 eV, which is much lower than those of conventional strong electron-acceptors. The synthesized series of CPs showed excellent absorption/fluorescence property in solution over a wide NIR range including NIR-II. Furthermore, owing to the inherent solid-state emissive property of the BAz skeleton, obvious NIR-II fluorescence from the film (up to λFL=1213 nm) and the nanoparticle in water (λFL=1036 nm, brightness=up to 29 cm-1 M-1) were observed, proposing that our materials are applicable for developing next-generation of NIR-II luminescent materials.

Steric Bulk‐Dependent Photoresponse of Sulfonamide Azobenzene Ligand in Arene Ruthenium(II) Complexes

AbstractA series of sulfonamide azobenzenes bearing alkyl substituents of increasing steric bulk at the position ortho to the N=N bond and their corresponding chloro(hexamethylbenzene)ruthenium(II) complexes were synthesized. The latter bearing mono‐substituted ligands exhibited an exocyclic azo bond under the E configuration, and underwent reversible E→Z photoisomerization upon irradiation with visible light, followed by thermal Z→E back isomerization upon resting in the dark at 20 °C. In contrast, the corresponding 2,6‐dimethyl substituted azobenzene complex, while also exhibiting an exocyclic azo bond, was isolated as the Z‐isomer and underwent uncommon solvent dependent irreversible photodissociation of azobenzene ligand upon visible light irradiation. Valuable insights into the photophysical and structural properties of these complexes were gained by combination of computational and X‐ray diffraction studies.

Self-Assembly Nanostructure Induced by Regulation of G-Quadruplex DNA Topology via a Reduction-Sensitive Azobenzene Ligand on Cells.

The control of DNA assembly systems on cells has increasingly shown great importance for precisely targeted therapies. Here, we report a controllable DNA self-assembly system based on the regulation of G-quadruplex DNA topology by a reduction-sensitive azobenzene ligand. Specifically, three azobenzene multiamines are developed, and AzoDiTren is identified as the best G4 binder, which displays high affinity and specificity for G4 DNA. Moreover, the reduction-sensitive nature of the azobenzene scaffold allows AzoDiTren to induce a complete change of the G4 topology in a tissue-specific manner, even at high metal cation concentrations. On this basis, the AzoDiTren-induced G4 conformational switch achieves control of the self-assembly of G4-functionalized DNAs on cells. This strategy enables the regulation of G4 and DNA self-assembly by the bioreductant-responsive ligand.

Light-driven interconversion of Pd2L4 cage and mononuclear PdL2 mediated by the isomerization of azobenzene ligand

The lantern-shaped cage Pd2L4 and tweezer-like PdL2 can be synthesized from the trans- and cis-isomer of an azobenzene-containing ligand, respectively, which were characterized by 1H, 13C, 1H-1H COSY, DOSY NMR spectroscopies, high-resolution ESI-MS and density function theory (DFT) calculations. The interconversion of Pd2L4 and PdL2 can be achieved via the cis-trans isomerization of the azobenzene unit on the ligand upon alternative irradiation of light 365 nm or 420 nm.

Highly Twisted Azobenzene Ligand Causes Crystals to Continuously Roll in Sunlight.

Direct conversion of solar energy to mechanical work promises higher efficiency than multistep processes, adding a key tool to the arsenal of energy solutions necessary for our global future. The ideal photomechanical material would convert sunlight into mechanical motion rapidly, without attrition, and proportionally to the stimulus. We describe crystals of a tetrahedral isocyanoazobenzene-copper complex that roll continuously when irradiated with broad spectrum white light, including sunlight. The rolling results from bending and straightening of the crystal due to blue light-driven isomerization of a highly twisted azobenzene ligand. These findings introduce geometrically constrained crystal packing as a strategy for manipulating the electronic properties of chromophores. Furthermore, the continuous, solar-driven motion of the crystals demonstrates direct conversion of solar energy to continuous physical motion using easily accessed molecular systems.

Impact of counter anions on spin-state switching of manganese(III) complexes containing an azobenzene ligand.

Four mononuclear manganese(III) complexes coordinated with photo-active hexadentate azobenzene ligands, [Mn(5azo-sal2-323)](X) (X = Cl, 1; X = BF4, 2; X = ClO4, 3; X = PF6, 4), were prepared. The impact of various counter anions on the stabilization and switching of the spin state of the manganese(III) center was explored through detailed magneto-structural investigation using variable temperature single-crystal X-ray diffraction, magnetic, spectroscopic, and spectroelectrochemical studies, along with theoretical calculations. All four complexes consisted of an isostructural monocationic distorted octahedral MnN4O2 coordination environment offered by the hexadentate ligand and Cl-, BF4-, ClO4-, and PF6- as counter anions respectively. Complex 1 with a spherical Cl- counter anion showed a reversible and gradual spin-state switching between low-spin (LS) (S = 1) and high-spin (HS) (S = 2) states above 400 K, where non-covalent cation-anion interactions played a significant role in stabilizing the LS state. While, irrespective of the shape of the counter anion, complexes 2-4 remained in the HS state throughout the measured temperature range of 300-2 K, where strong π-π interaction between the azobenzene motifs among cationic units played a substantial role in stabilizing the HS state. Furthermore, magnetic data analyses revealed significantly large zero-field splitting in the S = 1 state for 1 (D = 19.4 cm-1, E/D = 0.008) in comparison with that in the S = 2 state for 2-4 (D = 3.99-4.97 cm-1, E/D = 0.002-0.195). Spectroelectrochemical investigations revealed the quasi-reversible reduction and oxidation of the manganese(III) center to manganese(II) and manganese(IV), respectively. A detailed theoretical calculation at the DFT and CASSCF level of theory was carried out to better understand the magneto-structural correlation.

Spin-Crossover-Triggered Linkage Isomerization by the Pedal-like Motion of the Azobenzene Ligand in a Neutral Heteroleptic Iron(III) Complex.

The temperature dependence of magnetic susceptibility of [FeIII(azp)(qsal-Me)]·0.5CH3OH [Hqsal-Me = 5-methyl-N-(8-quinoyl)salicylaldimine, H2azp = 2,2'-azobisphenol] demonstrated that the spin-crossover (SCO) transition behavior changed from an abrupt transition to consecutive gradual conversions, and moreover, the initial abrupt transition was recovered, keeping the complex at room temperature. The variable-temperature crystal structures revealed that an SCO-triggered linkage isomerization of the azobenzene ligand from one orientation to two disordered orientations and the relaxation from the disordered orientations to the original orientation occurred. The high-spin to low-spin relaxation kinetics and theoretical calculation indicate that the pedal-like motion of the azobenzene ligand can be on in the high-spin state whereas off in the low-spin state.

Interfacial charge transfer processes in 2D and 3D semiconducting hybrid perovskites: azobenzene as photoswitchable ligand.

In the vast majority of studies on semiconductor particles ligands or capping agents are used that bind to the surface of the particles covering them with an electrically insulating shell. Since the transport of charge carriers and/or energy across interfaces is desirable for a variety of applications, the use of π-conjugated ligands becomes increasingly interesting. Among them are compounds that react to external stimuli. Molecular switches in particular are fascinating because the properties of the interfaces can be potentially adjusted as required. However, there is debate about how the properties of such special ligands are influenced by the presence of a semiconductor and vice versa. Here ammonium-modified azobenzene compounds were selected as prototypes for molecular switches and organic–inorganic hybrid perovskites as semiconductor materials. The class of ammonium–lead–halide phases as prototypes is peculiar because, in addition to the surface functionalization of 3D crystals, organic compounds can actually be incorporated into the crystal as 2D phases. Thus, for example, layered Ruddlesden–Popper phases are obtained. We present photoswitchable azobenzene ligands with different head-group lengths for the synthesis of 2D and 3D hybrid perovskite phases. The energy transfer mechanisms are influenced by the length of the molecular spacer moiety, which determines the distance between the π system and the semiconductor surfaces. We find huge differences in the photoswitching behaviour between the free, surface-coordinated and integrated ligands between the perovskite layers. Photoswitching of azobenzene ligands incorporated in 2D phases is nearly quenched, while the same mechanism for surface-coordinating ligands is greatly improved, compared to the free ligands. The improvement originates from an energy transfer from perovskite to azobenzene, which is strongly distance-dependent. This study provides evidence for the photoswitching of azobenzenes as ligands of hybrid perovskites, which depends on the spacing between the chromophore and the perovskite phase.

A toolbox of molecular photoswitches to modulate the CXCR3 chemokine receptor with light.

We report a detailed structure–activity relationship for the scaffold of VUF16216, a compound we have previously communicated as a small-molecule efficacy photoswitch for the peptidergic chemokine GPCR CXCR3. A series of photoswitchable azobenzene ligands was prepared through various synthetic strategies and multistep syntheses. Photochemical and pharmacological properties were used to guide the design iterations. Investigations of positional and substituent effects reveal that halogen substituents on the ortho-position of the outer ring are preferred for conferring partial agonism on the cis form of the ligands. This effect could be expanded by an electron-donating group on the para-position of the central ring. A variety of efficacy differences between the trans and cis forms emerges from these compounds. Tool compounds VUF15888 (4d) and VUF16620 (6e) represent more subtle efficacy switches, while VUF16216 (6f) displays the largest efficacy switch, from antagonism to full agonism. The compound class disclosed here can aid in new photopharmacology studies of CXCR3 signaling.

N-donor-stabilized Pd(II) species supported by sulphonamide-azo ligands: Ligand architecture, solvent co-ligands, C–C coupling

In this report, a series of synthetically affordable phosphine-free ligands (L1 – L4) of the form RSO2–NH–Ph–NN–Ph–NH–SO2R were prepared and examined as organic ligands for stabilizing palladium active centers; R = methyl, tolyl or triiso-propylphenyl. Palladium complexes, which were obtained in varying coordination environments as well as with varying complementary co-ligands (water, acetonitrile or pyridine), have been subjected to Suzuki and Heck coupling experiments in order to study molecular level ligand effects on preferred catalyst settings. The appreciable coupling activities for Suzuki and Heck coupling with functional group tolerance were recorded for palladium species generated from the chelate ligands. Results show that, despite the tridentate chelation characteristics of these azo-benzene ligands, the introduction of bulky units at the sulfonyl groups enabled generation of active palladium species with high turnover frequencies; e.g. 5040 h−1 (84% yield) within 5 min at 0.2 mol % loading of Pd.L2.py in only water as solvent. A correlation between catalytic efficiencies and the bulkiness of the coordinated co-ligand was obtained. However, while Suzuki coupling activity increased with increase in co-ligand sizes of the preformed complexes (i.e. water < acetonitrile < pyridine), the pyridyl co-ligand turned out to be very unfavourable for Heck coupling where the acetonitrile-complemented complexes possessed the higher activities. Therefore, it could be concluded that the best catalyst setting for Suzuki coupling may not be the best for Heck reaction.

Modulation of Electronic Mobility of a One-Dimensional Coordination Polymeric Molecular Wire with Light.

Metal ions often influence the photoswitching efficiency of a photochromic system. This article reports a one-dimensional polymer having cyclic azobenzenes coordinated to silver ions that are bridged by nitrates. The coordination polymer (CP-2) displays a photoresponsive behavior. The switching ability in the polymer form was faster compared to the parent azobenzene ligand without the metal ions. Azobenzenes are reported to be poorly conducting. Here, although the azobenzene ligand does not show significant electronic mobility, the coordination polymer (CP-2) displays a modest conductivity. The conductance in the cis form of the polymer is significantly higher compared to the trans form. Upon exposure to visible light, the cis form undergoes photoisomerization to the trans form with a drastic drop in the electronic mobility. The trans form can be reverted to the cis form thermally or by using UV light. Thus, this system offers a reversible control of the conductivity using light.

Metal-Carboxyl Helical Chain Secondary Units Supported Ion-Exchangeable Anionic Uranyl-Organic Framework.

As a less explored avenue, actinide-based metal-organic frameworks (MOFs) are worth studying for the particularity of actinide nodes in coordination behaviour and assembly modes. In this work, an azobenzenetetracarboxylate-based anionic MOF supported by uranyl-carboxyl helical chain units was synthesized, incorporating linear uranyl as the metal centre. This kind of helical chain-type building unit is reported for the first time in uranyl-based MOFs. Structural analysis reveals that the formation of helical chain secondary units can be attributed to restricted equatorial coordination of rigid flat azobenzene ligand to uranyl centres. Meanwhile, this newly-synthesized anionic material has been used to remove Eu3+ ions, as a non-radioactive surrogate of Am3+ ion, through an ion-exchange process with [(CH3 )2 NH2 ]+ ions in its open channels, as evidenced by a combination of 1 H NMR spectroscopy, EDS and PXRD.

Photoresponsive azobenzene ligand as an efficient electron acceptor for luminous CdTe quantum dots

Surface modified semiconductor quantum dots (QDs) with a tunable photoluminescence (PL) are particularly desirable for many photo-responsive devices. In a step forward towards this goal using 3-mercaptopropionic acid (MPA) the CdTe QDs of different sizes are synthesized. The MPA not only controls the size of the QDs but its dense shell around the surface also passivates the surface traps. Consequently, the CdTe QDs exhibit narrow emission with full-width at half-maximum (FWHM) of ∼0.3 eV. These QDs are attached to (E)-4-((3-formyl-4-hydroxyphenyl) diazenyl) benzoic acid (FHDBA) to fabricate a photochrome-fluorophore assembly. Ultraviolet (UV) irradiation induces trans-cis isomerization in FHDBA. Upon storing FHDBA in dark for ∼30 min, it completely reverts to trans-isomer. After photoisomerization the absorption band (n – π* transition) of cis-isomer of FHDBA overlaps with the emission band of CdTe QDs. Following UV excitation photoinduced electron transfer (ET) from conduction band (CB) of CdTe QDs to the LUMO of the cis-isomer of FHDBA quench the fluorescence of QDs by ∼16 times. Förster resonance energy transfer (FRET) may also quench the fluorescence but its contribution is minor. The photoinduced reversible trans-cis interconversion of FHDBA followed by ET in QDs-FHDBA assembly and the dual function of MPA as coupling strategy may open the avenues to design QDs luminescent photoswitchable probes for biomedical and energy storage applications.

A supramolecular chain of dimeric Dy single molecule magnets decorated with azobenzene ligands.

We report the synthesis, ab initio calculations, magnetic and optical characterization of a DyIII-based dimeric compound named DyAZO. The dimers self-organize into a supramolecular chain decorated with photo-isomerizable azobenzene ligands. DyAZO displays single-molecule magnet (SMM) behavior. However, ab initio calculations highlight a quite strong admixture of MJ states of the 6H15/2 level of DyIII ions, the presence of low-lying excited MJ states and antiferromagnetic Dy-Dy dipolar coupling. This favors zero-field fast tunneling. Accordingly the Dy-doped analogue YDyAZO (5.5% Dy doping) displays enhanced magnetic relaxation with a hysteresis that is observed at 0.5 K. The influence of the cis- to trans-isomerization of the decorating azobenzene ligand on magnetic properties has been tested for both solid samples and solutions of DyAZO and YDyAZO. This provides hints for the synthesis of future Dy-based photo-isomerizable molecules.

Charge/energy transfer dynamics in CuO quantum dots attached to photoresponsive azobenzene ligand

A series of stable CuO quantum dots (QDs) in aqueous alkaline medium are prepared and protected against rapid oxidation by capping with mercaptoacetic acid (MAA). The MAA not only regulates the size of the CuO QDs but it also acts as pendent group for further functionalization of QDs. A specific concentration of MAA improves the crystallinity and increases the fluorescence lifetime by decreasing the density of surface trap states. The MAA capped CuO QDs are attached to (E)-5-((4-chlorophenyl) diazenyl)-2-hydroxybenzaldehyde (CPDHB) and upon UV irradiation at 300 nm the CPDHB experiences a reversible trans- to cis-isomerization. The absorption band of the cis-isomer of CPDHB overlaps with the fluorescing band of the CuO QDs, as a result the fluorescence of the QDs is strongly quenched. The photoluminescenc (PL) quenching is attributed due to the photoinjected electron transfer from the conduction band (CB) of the CuO QDs to the lowest unoccupied molecular orbital (LUMO) of the cis-isomer of CPDHB. Förster resonance energy transfer (FRET) is also observed but its contribution is minor. The fluorescence quenching of CuO QDs in QDs - CPDHB assembly upon ultra-violet excitation and reversible trans-cis interconversion of CPDHB may potentially suggests to design fluorescent probes for bioimaging and to develop data and energy storage devices.

The coordination and activation of azobenzene by Ru5(μ5-C) cluster complexes

The reaction of Ru5(μ5-C)(CO)15, 1 with azobenzene, PhN = NPh, yielded the pentaruthenium carbido cluster compound Ru5C(CO)13(C6H4N=NC6H5)[μ-H], 4 containing a chelating ortho-metalated azobenzene ligand on one of the ruthenium atoms in a opened square-pyramidal Ru5C cluster. Compound 4 is electronically unsaturated and it readily adds one CO ligand at 25 °C to yield the electronically saturated complex Ru5C(CO)14(C6H4N=NC6H5)[μ-H], 5. Ru5C(CO)13(μ-η2-Ph)[μ-Au(NHC)], 3 reacts with azobenzene to yield the azobenzene complex Ru5C(CO)13(μ−η2−PhN = NPh)(η1−Ph)[μ−Au(NHC)], 6, NHC = 1,3-bis(2,6-diisopropylphenyl-imidazole-2ylidene), which contains a novel bridging di-σ-η2-N,N-coordinated azobenzene ligand across an open edge of an Ru5C cluster. Compound 6 eliminated benzene and was transformed to the new compound Ru5C(CO)13(C6H4N=NC6H5)[μ−Au(NHC)], 7 when heated to 105 °C for 3 h. Compound 7 is similar to 4 except that it has an Au(NHC) group in the place of the bridging hydrido ligand in 4. Compound 7 is also formally electronically unsaturated like 4. All of the new compounds were characterized by single-crystal X-ray diffraction analyses. The structures, bonding and reactivity of the complexes are discussed.