Atom-economic Reaction Research Articles

Proline-Catalyzed Diastereoselective Synthesis of Dihydroquinolinyl-Spirooxindole via Aza-Michael/Aldol Reaction

AbstractAn efficient diastereoselective synthesis of 1′,4′-dihydro-2′H-spiro[indoline-3,3′-quinolin]-2-one derivatives was achieved using catalytic amount of l-proline. The key reactions involved in the present tandem reaction are aza-Michael addition and aldol reaction. This atom economic reaction proceeded under mild conditions with a broad substrate scope and excellent diastereoselectivity in good to excellent yields.

Facile Synthesis of Silicon-Based Materials Modified Using Zinc(Ⅱ) 2-Bromoacetic as Heterogeneous Catalyst for the Fixation of CO2 into Cyclic Carbonates

Much effort has been devoted to the development of efficient heterogeneous catalysts for the conversion of carbon dioxide (CO2) into high-value chemicals. Generally, the cycloaddition of CO2 to epoxides is considered a green and atom-economic reaction for the production of cyclic carbonates. Based on this, three kinds of silicon-based catalysts modified using zinc(Ⅱ) 2-bromoacetic (Si-ZnBA-n, n = 1, 2, 3) were facilely synthesized and employed for the chemical fixation of CO2 to epoxides with the use of potassium iodide (KI). A series of characterization techniques were used to characterize the textual structures and physicochemical properties of Si-ZnBA-n. The synergistic effects of Zn, –NH2, –OH and the nucleophilic group guaranteed the catalytic activity of Si-ZnBA-n. Si-ZnBA-1 exhibited the best catalytic activity among Si-ZnBA-n because Si-ZnBA-1 possessed the highest Zn content. Additionally, the effects of the reaction conditions (temperature, pressure, time and catalyst loadings) were also discussed. The propylene carbonate (PC) yield could reach 97% under 130 °C, 2 MPa, for 5 h without the employment of organic solvent, and its selectivity was 99%. In addition, the recycling property of Si-ZnBA-1/KI was also investigated, and the catalytic system exhibited good cycle performance. Meanwhile, the catalyst showed outstanding versatility for CO2 application to various epoxides, and a possibly synergistic reaction mechanism was proposed. Finally, a dynamic model was developed to discuss the activation energy of the CO2 cycloaddition reaction over the Si-ZnBA-1 catalyst.

Solvent-Free Heterogeneous Catalytic Hydrogenation of Polyesters to Diols.

The utilization of carbon resources stored in plastic polymers through chemical recycling and upcycling is a promising approach for mitigating plastic waste. However, most current methods for upcycling suffer from limited selectivity towards a specific valuable product, particularly when attempting full conversion of the plastic. We present a highly selective reaction route for transforming polylactic acid (PLA) into 1,2-propanediol utilizing a Zn-modified Cu catalyst. This reaction exhibits excellent reactivity (0.65 g gcat -1 h-1 ) and selectivity (99.5 %) towards 1,2-propanediol, and most importantly, can be performed in a solvent-free mode. Significantly, the overall solvent-free reaction is an atom-economical reaction with all the atoms in reactants (PLA and H2 ) fixed into the final product (1,2-propanediol), eliminating the need for a separation process. This method provides an innovative and economically viable solution for upgrading polyesters to produce high-purity products under mild conditions with optimal atom utilization.

Synthesis of 2-Pyrones from Renewable Resources

AbstractAn atom-economic reaction sequence on a multigram scale for synthesizing 2-pyrone was developed starting from furfuryl alcohol, a renewable resource made from bran or bagasse, utilizing a large-scale thermal rearrangement of cyclopentadienone epoxide as the key step. Additionally, 6-substituted 2-pyrone natural product derivatives are readily accessible by this approach.

BF3-Catalyzed Intramolecular Fluorocarbamoylation of Alkynes via Halide Recycling

A BF3-catalyzed atom-economical fluorocarbamoylation reaction of alkyne-tethered carbamoyl fluorides is reported. The catalyst acts as both a fluoride source and Lewis acid activator, thereby enabling the formal insertion of alkynes into strong C-F bonds through a halide recycling mechanism. The developed method provides access to 3-(fluoromethylene) oxindoles and γ-lactams with excellent stereoselectivity, including fluorinated derivatives of known protein kinase inhibitors. Experimental and computational studies support a stepwise mechanism for the fluorocarbamoylation reaction involving a turnover-limiting cyclization step, followed by internal fluoride transfer from a BF3-coordinated carbamoyl adduct. For methylene oxindoles, a thermodynamically driven Z-E isomerization is facilitated by a transition state with aromatic character. In contrast, this aromatic stabilization is not relevant for γ-lactams, which results in a higher barrier for isomerization and the exclusive formation of the Z-isomer.

Insight into the Varying Reactivity of Different Catalysts for CO2 Cycloaddition into Styrene Oxide: An Experimental and DFT Study.

The cycloaddition of CO2 into epoxides to form cyclic carbonates is a highly sought-after reaction for its potential to both reduce and use CO2, which is a greenhouse gas. In this paper, we present experimental and theoretical studies and a mechanistic approach for three catalytic systems. First, as Lewis base catalysts, imidazole and its derivatives, then as a Lewis acid catalyst, ZnI2 alone, and after that, the combined system of ZnI2 and imidazole. In the former, we aimed to discover the reasons for the varied reactivities of five Lewis base catalysts. Furthermore, we succeeded in reproducing the experimental results and trends using DFT. To add, we emphasized the importance of non-covalent interactions and their role in reactivity. In our case, the presence of a hydrogen bond was a key factor in decreasing the reactivity of some catalysts, thus leading to lower conversion rates. Finally, mechanistically understanding this 100% atom economy reaction can aid experimental chemists in designing better and more efficient catalytic systems.

Ir-Catalyzed Regioselective Dihydroboration of Thioalkynes toward Gem-Diboryl Thioethers.

While 1,1-diboryl (gem-diboryl) compounds are valuable synthetic building blocks, currently, related studies have mainly focused on those 1,1-diboryl alkanes without a hetero functional group in the α-position. gem-Diboryl compounds with an α-hetero substituent, though highly versatile, have been limitedly accessible and thus rarely utilized. Herein, we have developed the first α-dihydroboration of heteroalkynes leading to the efficient construction of gem-diboryl, hetero-, and tetra-substituted carbon centers. This straightforward, practical, mild, and atom-economic reaction is an attractive complement to the conventional multistep synthetic strategy relying on deprotonation of gem-diborylmethane by a strong base. Specifically, [Ir(cod)(OMe)]2 was found to be uniquely effective for this process of thioalkynes, leading to excellent α-regioselectivity when delivering the two boryl groups, which is remarkable in view of the many competitive paths including monohydroboration, 1,2-dihydroboration, dehydrodiboration, triboration, tetraboration, etc. Control experiments combined with DFT calculations suggested that this process involves two sequential hydroboration events. The second hydroboration requires a higher energy barrier due to severe steric repulsion in generating the highly congested α-sulfenyl gem-diboryl carbon center, a structural motif that was almost unknown before.

Cycloaddition of CO2 to Epichlorohydrin over Pyridine, Vinylpyridine, and Poly(vinylpyridine): The Influence of Steric Crowding on the Reaction Mechanism

The cycloaddition of CO2 with epoxides is a 100% atom economical reaction that utilizes CO2 and produces valuable cyclic carbonate products. Organic bases are attractive catalysts for this reaction because of their green characteristics, such as low cost and low toxicity. However, further catalyst development is required to achieve acceptable yields at mild temperatures and pressures. This work aims to establish catalyst structure–performance relationships to accelerate the rational design of high performance organic base catalysts for the cycloaddition reaction. Toward this end, we investigate the influence of steric crowding at the ring nitrogen atom of a series of pyridine-based catalysts on the reaction mechanism and catalyst performance using batch reactor measurements at a mild temperature (57 °C) and atmospheric pressure under solventless conditions combined with in situ infrared spectroscopic characterization of the catalysts. We show that steric crowding at the ring nitrogen atom has a significant influence on the reaction mechanism and catalyst performance. Catalysts with unhindered access to the ring nitrogen atom, such as pyridine, 4-vinylpyridine, 3-vinylpyridine, and poly(4-vinylpyridine), are completely transformed during the cycloaddition reaction by quaternization from the epoxide reactant, producing zwitterionic pyridinium-epoxide adducts and ammonium salts that precipitate out of solution. Catalysts with hindered access to the ring nitrogen atom, such as 2-vinylpyridine and poly(2-vinylpyridine), resist quaternization from the epoxide reactant due to the high degree of steric hindrance at the ring nitrogen atom. The poly(2-vinylpyridine) catalyst in particular displayed high stability, high product selectivity, and high activity for cyclic carbonate synthesis. These molecular-level insights have significant implications for the rational design of active, stable, and metal-free catalysts for cyclic carbonate synthesis by tuning the steric crowding at the active site.

Non-Noble-Metal Mono and Bimetallic Composites for Efficient Electrocatalysis of Phosphine Oxide and Acetylene C-H/P-H Coupling under Mild Conditions

The present work describes an efficient reaction of electrochemical phosphorylation of phenylacetylene controlled by the composition of catalytic nanoparticles based on non-noble-metals. The sought-after products are produced via the simple synthetic protocol based on room temperature, atom-economical reactions, and silica nanoparticles (SNs) loaded by one or two d-metal ions as nanocatalysts. The redox and catalytic properties of SNs can be tuned with a range of parameters, such as compositions of the bimetallic systems, their preparation method, and morphology. Monometallic SNs give phosphorylated acetylene with retention of the triple bond, and bimetallic SNs give a bis-phosphorylation product. This is the first example of acetylene and phosphine oxide C-H/P-H coupling with a regenerable and recyclable catalyst.

Electrochemical C(sp2)-H/N-H "formal" cross-dehydrogenative coupling of olefins with benzotriazoles for synthesis of N-vinyl benzotriazoles.

The paper details an electrochemical method that couples olefins with benzotriazoles to form C(sp2)-N bonds, enabling the synthesis of N-vinyl benzotriazoles in moderate to good yields. nBu4NI functions as both an electrolyte and an iodine mediator, and the method does not require oxidants or metals. It is a highly atom-economical and clean reaction, with hydrogen as the sole byproduct.

Carboxamide functionality grafted entangled Co(II) framework as a unique hydrogen-bond-donor catalyst in solvent-free tandem deacetalization-Knoevenagel condensation with pore-fitting-mediated size-selectivity.

Concerning environmentally benign catalysis with reduced chemical usage, less energy consumption, and waste minimization, metal-organic frameworks (MOFs) with spatially isolated task-specific functionalities not only execute atom-economic important reactions but also enable size-exclusive catalysis at the interface of structure-function synergy. Herein, we synthesized a bipillar-layer Co(II) MOF from the dicarboxylate ligand and carboxamide moiety grafted pyridyl linker. The framework contains a [Co2(COO)4N4] secondary building unit (SBU) and shows excellent hydrolytic stability due to ample non-covalent interactions among the highly conjugated aromatic struts. Notably, the carboxamide functionalities remain free and are perfectly positioned throughout the one-dimensional channels of the framework, wherein three-fold interpenetration of the structure largely increases their density along the pore wall. Benefiting from these structural features, the activated MOF acts as an unprecedented organocatalyst in tandem deacetalization-Knoevenagel condensation towards electronically assorted substrates that were additionally characterized using single-crystal X-ray diffraction. Importantly, the reaction occurs under solvent-free mild conditions, and high catalyst reusability is recorded. In this one-pot cascade reaction, substrates with molecular dimensions larger than that of the three-fold interpenetration generated optimized pore-aperture undergo insignificant conversion, and therefore a rare molecular-dimension-induced size-selectivity is demonstrated. The catalytic route is detailed based on a battery of control experiments, including juxtaposing the performance of an isostructural MOF without any linker functionalization. Compared to the common Lewis acid mediated route, the results explicitly corroborate the first-ever substrate activation via hydrogen bonding to prepare coumarin derivatives via a tandem pathway, and shed light on this futuristic unconventional catalysis using contemporary materials and avoiding major operative glitches.

Atom-economical synthesis of 1,2-bis(phosphine oxide)ethanes from calcium carbide with straightforward access to deuterium- and13C-labeled bidentate phosphorus ligands and metal complexes

Straightforward access to bidentate phosphorus ligands and bis(phosphineoxide)ethanes is described based on atom-economic addition reaction. A practical approach was developed to incorporate2H and13C labels using easily available reagents.

Rh(III)-catalyzed [3 + 3] spirocyclization of 3-aryl-3-hydroxyisoindolinones with vinylene carbonate as a three-atom unit.

A [3 + 3] annulation of 3-aryl-3-hydroxyisoindolinones for the efficient synthesis of isoindolinone-derived spiroisochromenes is reported. In this Rh(III)-catalyzed spirocyclization reaction, vinylene carbonate is used as the coupling partner and acts as a three-atom synthon (C-C-O) through the decarboxylation process. This atom-economic reaction worked efficiently under mild conditions via a C-H activation pathway. It is the first example where 3-aryl-3-hydroxyisoindolinones are used as the building blocks to construct spiroheterocycles.

Synthesis, characterization, and application of metal-free sulfonamide-vitamin C adduct to improve the optical properties of PVA polymer

Improving optical properties is an important topic in the field of polymer science. In this research, a novel, metal-free, and inexpensive vitamin C sulfonamide adduct has been developed to enhance the optical behaviors of polyvinyl alcohol (PVA). Initially, the vitamin C adduct has been fabricated through atom economic reaction and then characterized using several spectroscopic techniques, including 1 H NMR, 13 C NMR, DEPT-135, Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). Accordingly, a dramatic chemical alteration in ascorbic acid structure has been confirmed and led to enhancing chemical interactions with the host polymer. The ascorbic acid adduct has been doped into PVA to prepare a flexible film of polymer composites with potential optical behaviors. The identity of composite film has specified from FTIR, XRD, and UV–vis spectroscopy. The XRD pattern of the hybrid polymer has revealed a remarkable boost in its amorphous structure compared to the PVA host. The FTIR data of both matrix PVA and its composites reveal the potent chemical interactions of functional groups within the hybrid PVA. The main optical information of synthesized hybrid film was obtained from the UV–vis spectra. The refractive index ( n ) and dielectric loss ( ε i ) values are elevated notably, whereas the optical band gap energy (E g ) declined from 6.3 to 3.6 eV. The direct electronic transition between the valence band (VB) and conduction band (CB) was determined by implementing Tauc’s model. These preliminary results suggest that the fabricated flexible composite will have an excellent opportunity to use in the manufacturing optical devices.

Kinetic study of CO2 fixation into propylene carbonate with water as efficient medium using microreaction system

Carbon dioxide (CO 2 ) utilization and fixation have become one of the most important research areas nowadays due to the increase of global greenhouse effect. Cyclic carbonate, which is widely used in various fields, can be synthesized by fixation of CO 2 with epoxide in industry. Moreover, the synthesis of cyclic carbonate is a 100% atom economical reaction, which makes it eco-friendly and promising. To enhance the reaction efficiency and safety, a microreaction system was used as the platform for cycloaddition reaction. In this work, tetrabutylammonium bromide (TBAB) was chosen as catalyst, and propylene oxide (PO) as a mode substrate. Interestingly, the addition of water can increase the propylene carbonate (PC) yield and decrease the activation energy considerably, proving water as catalyst promoter for PC synthesis. PC yield and selectivity could reach 91.6% and 99.8%, respectively. The Influence factors and kinetic equation for CO 2 cycloaddition were obtained as well.

Atom-economic Michael reaction between hydroacridines and arylmaleimides without catalyst/additive

Previously unknown spiroderivatives of 3,1-benzoxazines were synthesized by the reaction of anthranilic acid with cyclic ketones. The interaction of 3,1-spirobenzoxazines with Vilsmeier-Haack reagent (POCl3 (PBr3)/DMF), depending on the amount of formulation agent, leads to the formation of hydroacridones or hydroacridines. Under catalyst- and additive-free conditions, N-arylmaleimides, like Michael's acceptors, are added to the hydroacridines in DMSO to form the corresponding adducts. The reaction proceeds stereoselectively with the formation of a mirror pair of diastereomers, if the products have only two chiral centers. In the presence of three chiral centers in the structure of Michael's adducts, the reaction is not stereoselective. The reaction proceeds by the sp3 hybrid carbon atom under non-catalytic conditions due to the imin-enamine tautomerism of chloro(bromo)hydroacridines. The presented reaction can also be considered as an effective atom-economical aza-ene reaction, which fully meets today's requirements for eco-friendly reaction. The synthesized compounds are potential biologically active substances and can also be used as "building-blocks" for organic synthesis.

Transition-Metal-Catalyzed C-S, C-Se, and C-Te Bond Formations via Cross-Coupling and Atom-Economic Addition Reactions. Achievements and Challenges.

In the present review, we discuss recent progress in the field of C-Z bond formation reactions (Z = S, Se, Te) catalyzed by transition metals. Two complementary methodologies are considered─catalytic cross-coupling reactions and catalytic addition reactions. The development of advanced catalytic systems is aimed at improved catalyst efficiency, reduced catalyst loading, better cost efficiency, environmental concerns, and higher selectivity and yields. The important rise of research efforts in sustainability and green chemistry areas is critically assessed. The paramount role of mechanistic studies in the development of a new generation of catalytic systems is addressed, and the key achievements, problems, and challenges are summarized for this field.

The Catalytic Synthesis of N-Aryl Indoles Featuring an Alternative Disconnection. Hydroaminoalkylation for a Telescoped Reaction Sequence.

A tricatalytic telescoped synthesis toward C3-methyl-N-aryl indoline and indole products is reported. An in situ generated tantalum(V) ureate catalyst is used for the hydroaminoalkylation of o-chlorostyrene with N-methylaniline to first make a Csp3─Csp3 bond. Subsequent nickel-catalyzed C-N coupling forms N-aryl indolines, and if desired, subsequent oxidation to N-aryl indoles can be achieved using catalytic [Cu(MeCN)4]BF4 and tert-butylperoxy-2-ethylhexyl carbonate as the terminal oxidant. This strategy highlights an alternative C-C bond disconnection for the synthesis of indoles, which is enabled by the atom-economic hydroaminoalkylation reaction. The method was streamlined using a three-step, two-pot approach to afford up to 73% overall isolated yield of variously substituted C3-methyl-N-aryl indoles.

Environment Friendly Process toward Functional Polyorganosiloxanes with Different Chemical Structures through CuAAC Reaction

Despite the presence of many methods, which were created to date for the preparation, functionalization, and vulcanization of polysiloxanes, the development of materials based on silicones remains relevant and requires the introduction of new approaches that combine such modern strategies as atom-economical reactions, refusal to use harmful and dangerous organochlorosilanes, and using the principles of green chemistry and minimizing the use of solvents. In this work, we develop modern approaches to the preparation of both linear and branched polyorganosiloxanes containing azidopropyl functions at the silicon atom. In the first part of the work, it was shown that the proposed method for introducing these groups by catalytic rearrangement with the opening of cyclosiloxane is effective and makes it possible to obtain polysiloxanes with different contents of azidopropyl groups and different molecular weights. The second part of the work demonstrated the possibility of postpolymerization functionalization of such polymers by the mechanism of azide–alkyne cycloaddition under “green” conditions, without using solvents and amines. All of the most important functional fragments were introduced into the structures of organosilicon polymers by a single mechanism, under simple conditions, without the use of expensive catalysts, exposure to irradiation, and hazardous solvents. The combination of simplicity and versatility in the preparation of polysiloxanes with azidopropyl groups with the possibility of performing a click reaction makes it possible to directionally obtain the required materials based on universal raw materials and, as a result, can open up broad prospects for serious development and rethinking of the chemistry of silicones.

Palladium-Catalyzed Carbonylative [5+1] Cycloaddition of N-Tosyl Vinylaziridines: Solvent-Controlled Divergent Synthesis of α,β- and β,γ-Unsaturated δ-Lactams.

A palladium-catalyzed carbonylative [5+1] cycloaddition of N-tosyl vinylaziridines with CO has been developed. This protocol affords an efficient and practical approach for solvent-controlled divergent synthesis of α,β-unsaturated δ-lactams in dimethylformamide and β,γ-unsaturated δ-lactams in tetrahydrofuran in good to excellent yields. Significantly, the step- and atom-economical reactions are more regioselective toward [5+1] cycloaddition than toward [3+1] cycloaddition.