AT89C52 Single Chip Research Articles

Design of Intelligent Street Lamp Control System

Design of Intelligent Street Lamp Control System

Improving thermal control efficiency of solar energy utilization based on at series single-chip microcomputer

The thesis researched and designed a solar air heating automatic control system. The system is based on the AT89C52 single-chip microcomputer. The system has automatic tracking function control of the blade heat collector, winter and summer function conversion, and active and passive function conversion functions. The advantage of this system is that it can set the operating parameters of the system as required and can typically work following the set mode under complicated weather changes. Through experimental research, it is found that the solar air heating automatic control system can effectively improve the utilization efficiency of solar energy.

Study on a Wireless Temperature and Humidity Monitoring System for Workshop with Constant Temperature Based on SCM

A wireless temperature and humidity monitoring system for workshop with constant temperature based on AT89C52 Single chip microcomputer and nRF905 wireless microchip is studied. The system is consists of base station and slave station. Base station is mainly consists of temperature acquisition module, humidity acquisition module, wireless communicating module and communicating testing module. Good communication protocols play an important role in ensuring the correct monitoring data. So the network topology, communication data form, ad hoc networks protocol, mac protocol and data link layer protocols are discussed for commutation protocol to host computer software. The cost of the system is low and it has a large function area and a good performance. It is able to provide messages of workshop with constant temperature for improving machining accuracy and prolonging the life of equipment in machine shop.

Multiple Remote Intelligent Temperature Control System

Greenhouse temperature control is a key factor which affects crop growth, and the traditional way of temperature regulation already cannot satisfy the requirements of modern greenhouse: high precision, rapid acquisition and response. The 32-bit EasyARM1138 single chip microcomputer is taken as the main control chip to implement multiple canopy temperature acquisition and control. AT89C52 single chip microcomputer is applied as assisted control chip to implement single greenhouse temperature control. DS18B20 digital temperature sensor is used to collect temperature information in the greenhouse. Through buttons, LCD monitor, GPRS SMS alarm module, and light alarm system with LED and buzzer sound to realize human-computer interaction. Through analyzing of the present condition of greenhouse environment, greenhouse temperature parameters are adjusted to achieve the requirements of crops growth and cultivation development to provide the most suitable temperature environment for crop growth, and increase crop yield and quality.

Design of Intelligent Hanger Based on Single Chip and Pro-E

A new type of intelligent hanger was designed based on single chip and Pro-E software. 3D entity model of actuator and cover curtain mechanism are established by Pro-E. Wings structure of hanger mechanical part was adopted screw rod and motor combination of the lifting mechanism can make the wings outspread and fold, unique cover curtain structure was adopted. Cover curtain rolls up and down through the motor driving. The control system adopts AT89C52 single chip. According to the information that coming from the rain sensor and the temperature sensor, two stepper motor’s positive and negative rotational motion was controlled. So as to realize automatic adjustment when it rains. The hanger will be automatically closed when the temperature is higher than expected, and the hanger will be automatically opened when the temperature is less than expected. The hanger that has been produced has a good performance.

The Design of Sport Bicycle Speed Odometer

As bicycle sport equipment, a sport bike needs a speed and distance measuring device, due to the characteristic of road cycling, thereby mastering the state of motion. According to external conditions such as temperature, wind speed, the bike can make the appropriate adjustment to achieve the best movement effect. The bicycle speed odometer is a major accessibility tool that satisfies with needs of the people with fast development. This study elaborated a bike speed odometer design based on Hall element, taking AT89C52 single chip as the core, measuring speed with A44E Hall sensor, to finish the bike mileage/speed measurement and statistics by displaying bike mileage and speed in real time. By using the Hall elements, the hardware of speed odometer input the number of pulse of per circle into the single-chip computer system. Then the signal processed by the single-chip computer displays. The software is programmed with assembly language and modular design idea. The design of the hardware circuit is simple and the subroutine has universal property, which fully meet the design requirements and possess a wide range of application and dissemination value.

Control System Design of Intelligent Water Meter

The control system of a new type of intelligent household water meter which can prevent water leakage is designed in this paper. That water drives the rotor-wing rotating can make micro direct-current generator generate and store power used for the system power supply. OMRON EE-SX671 type photoelectric sensor to detect water flow is used in the system. And a new water electromagnetic valve is designed, the type of which is normally open and direct-operated. If closed, it will be self-locking state and not need power supply. But it needs be reset manually. The design program based on AT89C52 single-chip microcomputer not only displays water flow using LED but also controls the automatic shut-off function of electromagnetic valve.

Design of Data Acquisition and LED Display System

This paper set up a data acquisition system by AT89C52 single chip microcomputer as control core, using the RS-232 serial manner communicated with responsibled for data acquisition of microprocessor, and used LED to display. System can be divided into data acquisition module, serial communication module, control module, keyboard module, display module, etc. System of multi-channel data acquisition can be displayed in the LED after processed. The hardware circuit and software realized design functions :data acquisition and LED display.

Development of Embedded Control System of Micro-Flow Variable Plunger Pump Based on Frequency Control

In order to break through the traditional flow change way of the variable plunger pump, a kind of micro-flow variable plunger pump with stepper motor is designed; and on this basis, the main control electric circuit of the pump is developed by taking AT89C52 single-chip microprocessor as MCU and making use of the keyboard and display circuit and three internal timers of AT89C52; the driving circuit is developed by using chapped wave driving model implemented by the chips of L297 and L298N; the software of the system is also developed. The joint debugging results of hardware and software indicate that the developed embedded control system not only implements the numerical driving of the pump, but also carries out the frequency control of the pump by changing the input frequency and duty ratio, additionally, the control of the whole system is flexible and the operation is simple.

Development of an Intellectualized Wireless Infusion Control/Monitoring System

One kind of automatic wireless infusion control/monitoring system based on micro controller unit(MCU) and nRF401 had been designed and implemented to overcome the shortages in the processing of venous transfusion care. The system used AT89C52 single-chip computer as machine’s core, the realization of communication between a master computer and a slave computer with nRF401. Doctors could get the information through the wireless transmission to control and monitor the process of transfusion in time. According to RS232 communication protocol, the system implements the communication between one computer and multi-computer by adopting AT89C51 single chip microcomputer. This system has many advantages, such as low cost, high precision, small volume, convenience, low power consumption, good extendibility and so on.

Design of LED Display Control System Based on AT89C52 Single Chip Microcomputer

Abstract—This paper introduces display design process about hardware and software based on AT89C52 single chip microcomputer. We use a simple external circuit to control the display screen, which size is 32 × 192. The display screen also can display the size of the six 32 × 32 dot matrix Chinese characters by a dynamic scan mode, and can be divided into two small display screen, which can display twenty-four Chinese characters whose size is 16×16. We can modify the code to change the content of the display, subtitles can achieve scrolling function and the scroll speed can be adjusted according to requirements, subtitles can also achieve pause function. The Chinese character code stored in external data memory, the capacity of data memory is expanded according to the requirements of Chinese characters we want to show. This display screen has advantages of small volume, few hardware and simple circuit structure.

Design of Fumigation Temperature Control System Based on Single-Chip Microcontroller

In order to mitigate problems such as temperature non-linearity, severe hysteresis, and large magnitude of fluctuation, we have designed a fumigation temperature control system based on AT89C52 single-chip microcontroller. The combination of improved PID algorithm and Pulse Width Modulation (PMW) technology results in whole-process fumigation temperature controlling with reduced overshoot and shortened lag time. Our test results show that the design leads to superior temperature control capability and dynamic performance. The fumigation temperature control system based on this design has very good stability and reliability, with friendly user-machine interface that allows easy operation. The circuits and programs used in the design have good versatility and portability.

Research on the Key Technology of a Testing System of Piezomagnetic Force Transducer

Abstract Considering the distinct disadvantages, such as complex electric circuit, long debugging period, low testing efficiency, and nonconductivity to the actually promoted application of the traditional permalloy force transducer’s testing system, a new testing system of a permalloy force transducer is proposed according to the characteristics of the output signals. The working principle of the testing system is analyzed. The measuring and controlling section of AT89C52 single-chip microcomputer is studied and the single-chip microcomputer system is discussed from the design and realization of both hardware and software aspects. Economic and practical method is utilized to solve the problem of quantitative research on the piezomagnetic effect of the designed permalloy force transducer. The experimental measurements indicate that the designed testing system is practical and effective. The testing system is of great significance to the quantitative research of the piezomagnetic properties and the repeatability characteristic of piezomagnetic force transducer, which can greatly promote the engineering applications of permalloy piezomagnetic force transducers.