Aryl Group Transfer Research Articles

Aryl group transfer and C–P bond formation in the reaction of organonickel complexes with sodium 3,4,5-triphenyl-1,2-diphospholide

The reaction of [NiBr(aryl)(bpy)] organonickel complexes with sodium 1,2-diphospholide leads to unknown 1-aryl-1,2-diphospholes by aryl group transfer.

On the Barton Copper-Catalyzed C3-Arylation of Indoles using Triarylbismuth bis(trifluoroacetate) Reagents.

We disclose herein our detailed investigation into the Barton copper-promoted C3-arylation of indoles using triarylbismuth bis(trifluoroacetates). The arylation of unsubstituted 1H-indole using Barton's conditions gave a low yield of the C3-arylated indole, along with small amounts of the product of double C2/C3-arylation and traces of the product of C2 arylation. On the contrary, the arylation of indoles blocked at the C2 position is highly efficient, affording the desired products of C3-arylation in good to excellent yields. The reaction operates under simple conditions, shows good substrate scope, excellent functional group compatibility, and allows the transfer of electron-neutral or deficient aryl groups. Computational studies propose a mechanism involving a trifluoroacetate-assisted C-H activation step.

Diarylation of N- and O-nucleophiles through a metal-free cascade reaction

Diarylation of N- and O-nucleophiles through a metal-free cascade reaction

Palladium-catalyzed aryl group transfer from triarylphosphines to arylboronic acids

A study of Pd-catalyzed arylation of arylboronic acids with triarylphosphines is presented. Various parameters of this transformation, such as the oxygen presence, choice of solvent, temperature, palladium source, bases and oxidants, were tested and the optimal conditions of the aryl transfer were determined. The effect of electron-withdrawing and electron-donating substituents on the aryl groups of both reactants was also investigated. The unusual transfer of the acetate group from Pd(OAc)2 to p-nitrophenylboronic acid in the presence of PAr3 is reported. A plausible mechanism of the Pd-catalyzed aryl group transfer from PAr3 to the arylboronic acid is proposed.

Copper-Promoted N-Arylation of the Imidazole Side Chain of Protected Histidine by Using Triarylbismuth Reagents.

The N-arylation of the side chain of histidine by using triarylbismuthines is reported. The reaction is promoted by copper(II) acetate in dichloromethane at 40 °C under oxygen in the presence of diisopropylethylamine and 1,10-phenanthroline and allows the transfer of aryl groups with substituents at any position of the aromatic ring. The reaction shows excellent functional group tolerance and is applicable to dipeptides where the histidine is located at the N terminus. A histidine-guided backbone N-H arylation was observed in dipeptides where the histidine occupies the C terminus.

Cooperative Bond Activation and Facile Intramolecular Aryl Transfer of Nickel–Aluminum Pincer‐type Complexes

AbstractPincer‐type nickel–aluminum complexes were synthesized using two equivalents of the phosphinoamide, [PhNCH2PiPr2]−. The Ni0–AlIII complexes, {(MesPAlP)Ni}2(μ‐N2) and {(MesPAlP)Ni}2(μ‐COD), where MesPAlP is (Mes)Al(NPhCH2PiPr2)2, were structurally characterized. The (PAlP)Ni system exhibited cooperative bond cleavage mediated by the two‐site Ni–Al unit, including oxidative addition of aryl halides, H2 activation, and ortho‐directed C−H bond activation of pyridine N‐oxide. One intriguing reaction is the reversible intramolecular transfer of the mesityl ring from the Al to the Ni site, which is evocative of the transmetalation step during cross‐coupling catalysis. The aryl‐transfer product,(THF)Al(NPhCH2PiPr2)2Ni(Mes), is the first example of a first‐row transition metal–aluminyl pincer complex. The addition of a judicious donor enables the Al metalloligand to convert reversibly between the alane and aluminyl forms via aryl group transfer to and from Ni, respectively. Theoretical calculations support a zwitterionic Niδ−–Alδ+ electronic structure in the nickel–aluminyl complex.

Cooperative Bond Activation and Facile Intramolecular Aryl Transfer of Nickel-Aluminum Pincer-type Complexes.

Pincer-type nickel-aluminum complexes were synthesized using two equivalents of the phosphinoamide, [PhNCH2 Pi Pr2 ]- . The Ni0 -AlIII complexes, {(Mes PAlP)Ni}2 (μ-N2 ) and {(Mes PAlP)Ni}2 (μ-COD), where Mes PAlP is (Mes)Al(NPhCH2 Pi Pr2 )2 , were structurally characterized. The (PAlP)Ni system exhibited cooperative bond cleavage mediated by the two-site Ni-Al unit, including oxidative addition of aryl halides, H2 activation, and ortho-directed C-H bond activation of pyridine N-oxide. One intriguing reaction is the reversible intramolecular transfer of the mesityl ring from the Al to the Ni site, which is evocative of the transmetalation step during cross-coupling catalysis. The aryl-transfer product,(THF)Al(NPhCH2 Pi Pr2 )2 Ni(Mes), is the first example of a first-row transition metal-aluminyl pincer complex. The addition of a judicious donor enables the Al metalloligand to convert reversibly between the alane and aluminyl forms via aryl group transfer to and from Ni, respectively. Theoretical calculations support a zwitterionic Niδ- -Alδ+ electronic structure in the nickel-aluminyl complex.

Regiodivergent Access to 2- or 3-Substituted Indanones: Catalyst-Controlled Carboacylation via C–C Bond Activation

Indanones are ubiquitous in biologically active compounds. Intramolecular hydroacylation of aldehydes and alkenes is an efficient and atom-economic route to indane rings. However, these reactions a...

Copper‐Promoted N‐Arylation of the Indole Side Chain of Tryptophan Using Triarylbismuthines

A simple protocol for the regioselective N‐arylation of the indole side chain of tryptophan using triarylbismuth reagents as the arylating agent is reported. The reaction is catalyzed by copper(II) acetate, and operates in the presence of triethylamine or pyridine under air at 50 °C. This reaction allows the transfer of aryl groups bearing electron neutral, donating or withdrawing substituents at any position of the ring, shows high functional group tolerance, and retains the integrity of the stereogenic center. The protocol was utilized to N‐arylate tryptophan‐containing di‐ and tripeptides.

N-Arylation of DABCO with Diaryliodonium Salts: General Synthesis of N-Aryl-DABCO Salts as Precursors for 1,4-Disubstituted Piperazines.

Employing DABCO as a substrate, aryl(mesityl)iodonium triflates are introduced as arylating agents for a tertiary sp3-nitrogen. Mild conditions and exceptional selectivity of the aryl group transfer allow unprecedented N-aryl-DABCO salts to be obtained, bearing substituents of different electronic natures. This metal-free methodology has no analogy among known transition-metal-based reactions. The utility of isolated N-aryl-DABCO salts is demonstrated for the preparation of flibanserin.

Metathesis-active ligands enable a catalytic functional group metathesis between aroyl chlorides and aryl iodides.

Current methods for functional group interconversion have, for the most part, relied on relatively strong driving forces which often require highly reactive reagents to generate irreversibly a desired product in high yield and selectivity. These approaches generally prevent the use of the same catalytic strategy to perform the reverse reaction. Here we describe a catalytic functional group metathesis approach to interconvert, under CO-free conditions, two synthetically important classes of electrophiles that are often employed in the preparation of pharmaceuticals and agrochemicals-aroyl chlorides (ArCOCl) and aryl iodides (ArI). Our reaction design relies on the implementation of a key reversible ligand C-P bond cleavage event, which enables a non-innocent, metathesis-active phosphine ligand to mediate a rapid aryl group transfer between the two different electrophiles. Beyond enabling a practical and safer approach to the interconversion of ArCOCl and ArI, this type of ligand non-innocence provides a blueprint for the development of a broad range of functional group metathesis reactions employing synthetically relevant aryl electrophiles.

Gold-Catalyzed C-S Aryl-Group Transfer in Zinc Finger Proteins.

Reaction of the Au-C N chelate [Au(bnpy)Cl2 ] with the full-length zinc finger (ZnF; ZnCys3 His) of HIV nucleocapsid protein NCp7 results in C-S aryl transfer from the AuIII organometallic species to a cysteine of the ZnF. The reaction is general and occurs even for finger 3 of the transcription factor Sp1, containing a ZnCys2 His2 coordination sphere. This reaction is the first demonstration of group transfer from a coordination compound to biologically important zinc fingers, and is especially noteworthy for the ZnCys2 His2 transcription factors. The work expands the corpus of organometallic species which can efficiently modify biomolecules through C-atom transfer. The electronic features of the gold compound leading to this unexpected reaction were explored by X-ray absorption spectroscopy.

A utility for organoleads: selective alkyl and aryl group transfer to tin.

Me4Pb and Ph4Pb readily transfer methyl or phenyl groups to an equivalent molar ratio of tin(iv) chlorides in the order SnCl4 > MeSnCl3 > Me2SnCl2 > Me3SnCl, often in a selective manner. Me3PbCl and Ph3PbCl specifically transfer a single methyl/phenyl group under the same reaction conditions to produce recovered yields in >75%. Specific transfer of 2 methyl groups from PbMe4 can be achieved at elevated temperatures and/or a 2 : 1 molar ratio Pb : Sn.

Reactions of Neutral Cobalt(II) Complexes of a Dianionic Tetrapodal Pentadentate Ligand: Cobalt(III) Amides from Imido Radicals.

Neutral cobalt(II) complexes of the dianionic tetrapodal pentadentate ligand B2Pz4Py, in which borate linkers supply the anionic charges, are reported. Both the six-coordinate THF adduct 1-THF and the five-coordinate THF-free complex 1 are in a high-spin S = 3/2 configuration in the ground state and have been structurally characterized by X-ray crystallography. These two Co(II) starting materials react rapidly with aryl azides of moderate steric bulk. The thermodynamic products of these reactions are low-spin, diamagnetic, Co(III) amido complexes that are either monomeric, when an external hydrogen atom source such as 1,4-cyclohexadiene is present, or dimeric products formed via C-C coupling of the azide aryl group and internal transfer of H• to the nitrogen. These products are fully characterized and are rare examples of octahedral Co amido compounds; structural determinations reveal significant pyramidalization of the amido nitrogens due to π-π repulsion wherein the amido ligand is primarily a σ donor. The amido products arise from highly reactive Co(III) imido radical intermediates that are the kinetic products of the reactions of 1 or 1-THF with the azide reagents. The imido radicals can be detected by X-band EPR spectroscopy and have been probed by density functional theory computations, which indicate that this doublet species is characterized by a high degree of spin localization on the imido ligand, accounting for the reactivity with hydrogen atom sources and dimerization chemistry observed. The high coordination number and the electron-rich nature of the dianionic B2Pz4Py ligand framework render the imido ligand formed highly reactive.

Enhancement of the Catalytic Activity of Chiral H8 -BINOL Titanium Complexes by Introduction of Sterically Demanding Groups at the 3-Position.

The activity of chiral titanium catalysts derived from H8 -BINOL ligands in the enantioselective arylation of an aldehyde with PhTi(OiPr)3 is significantly enhanced by an increase of the size of the substituent at the 3-position. High enantioselectivity (> 90 % ee) can be obtained even at a substrate/catalyst ratio (S/C) of 800 for DTBP-H8 -BINOL (DTBP=3,5-di-tert-butylphenyl) and DAP-H8 -BINOL (DAP=3,5-di(9-anthraceny)phenyl). These titanium catalysts are successfully applied to the enantioselective arylation and heteroarylation of aldehydes at a S/C ratio of 400 by using organotitanium reagents generated in situ from bromide precursors. The remarkable weakening of the intramolecular aggregation of the two -Ti(OiPr)3 units in a DPP-H8 -BINOL (DPP=3,5-diphenylpheny)-derived bis-titanium complex is revealed by X-ray and variable-temperature (VT)-NMR studies. Based on these observations, a catalytic cycle, involving the rate-limiting aryl group transfer followed by aldehyde complexation and enantioselective arylation, is proposed to account for the high activity of the 3-substituted H8 -BINOL catalyst system.

Aryl Group Transfer from Tetraarylborato Anions to an Electrophilic Dicopper(I) Center and Mixed-Valence μ-Aryl Dicopper(I,II) Complexes.

The synthesis of discrete, cationic binuclear μ-aryl dicopper complexes [Cu2(μ-η(1):η(1)-Ar)DPFN]X (Ar = C6H5, 3,5-(CF3)2C6H3, and C6F5; DPFN = 2,7-bis(fluoro-di(2-pyridyl)methyl)-1,8-naphthyridine; X = BAr4(-) and NTf2(-); Tf = SO2CF3) was achieved by treatment of a dicopper complex [Cu2(μ-η(1):η(1)-NCCH3)DPFN]X2 (X = PF6(-) and NTf2(-)) with tetraarylborates. Structural characterization revealed symmetrically bridging aryl groups, and (1)H NMR spectroscopy evidenced the same structure in solution at 24 °C. Electrochemical investigation of the resulting arylcopper complexes uncovered reversible redox events that led to the synthesis and isolation of a rare mixed-valence organocopper complex [Cu2(μ-η(1):η(1)-Ph)DPFN](NTf2)2 in high yield. The solid-state structure of the mixed-valence μ-phenyl complex exhibits inequivalent copper centers, despite a short Cu···Cu distance. Electronic and variable-temperature electron paramagnetic resonance spectroscopy of the mixed-valence μ-phenyl complex suggest that the degree of spin localization is temperature-dependent, with a high degree of spin localization observed at lower temperatures. Electronic structure calculations agree with the experimental results and suggest that the spin is localized almost entirely on one metal center.

Reactivity of mixed organozinc and mixed organocopper reagents: 12. Three component reaction of mixed (n-alkyl)(diaryl)zincates, chloroformates and phosphines for the synthesis of esters

The reaction of mixed n-butyldiphenylzincate, n-BuPh2ZnMgBr with ethyl chloroformate, ClCOOEt in the presence n-Bu3P in THF takes place with quantitative yield and phenyl group transfer to give PhCOOEt. Ethoxycarbonylation of n-BuPh2ZnMgBr is preferable to the reaction of PhMgBr forming ester and triphenylcarbinol and also to the reaction of triphenylzincate, Ph3ZnMgBr for atom economy. Group selectivity in the phosphine catalyzed C–COOR coupling of n-BuPh2ZnMgBr and n-Bu2PhZnMgBr can be controlled by changing reaction parameters. n-Bu3P catalyzed reaction of n-BuPh2ZnMgBr with ClCOOEt takes place with phenyl selectivity whereas reaction of n-Bu2PhZnMgBr with ClCOOPh results in n-butyl transfer. Catalysis by Ph3P increases n-butyl group:phenyl group transfer ratio in the ethoxycarbonylation of both zincates. Selective transfer of aryl groups in n-Bu3P catalyzed reaction of n-butyl(aryl)2ZnMgBr reagents with ClCOOEt in THF provides a new procedure for the organometallic synthesis of arenecarboxylic acid ethyl esters at room temperature.

Copper(II) chloride assisted aryl exchange in arylmethanes: a simple and efficient route to triarylmethane derivatives

Copper(II) chloride is utilized to carry out ligand-free one-pot synthesis of triarylmethane derivatives in moderate to good yields. Copper(II) chloride also facilitated the transformation of both bis(indolyl)methane and leuco base to the corresponding triarylmethane derivatives by aryl group transfer. Based on the observed aryl transfer, an easy access to triarylmethane derivatives is devised by treating an equimolar mixture of bis(indolyl)methane and leuco base with indole or N,N-dimethylaniline in the presence of CuCl2.

Catalytic asymmetric arylation of aliphatic aldehydes using a B/Zn exchange reaction

Herein we describe the arylation of aliphatic aldehydes using the boron/zinc exchange reaction for the generation of transferable aryl groups, in the presence of chiral amino alcohol ligands. For the first time, a systematic investigation of this reaction using aliphatic aldehydes was developed and we have found that it proved to be significantly more challenging than the arylation of aromatic aldehydes. The corresponding chiral secondary alcohols were obtained in up to 73% ee.

Boron-Zinc Exchange in The Diastereoselective Arylation of Sugar-Based Aldehydes­: Stereoselective Synthesis of (+)-7-epi-Goniofufurone and Analogues

The substrate-controlled diastereoselective arylation of chiral aldehydes readily available from carbohydrates is described, using the boron–zinc exchange reaction to generate the transferable aryl groups. The methodology developed was applied to the total synthesis of the styryllactone (+)-7-<i>epi</i>-goniofufurone and analogues thereof.