Hybrid Artificial Neural Network Research Articles

Shear capacity of slender FRP-RC beams utilizing a hybrid ANN with the firefly optimizer

The popularity of fiber-reinforced polymer (FRP) bars as a structural element has soared due to their advantageous mechanical and physical properties. Despite an abundance of code requirements and heuristic equations, engineers specializing in structural retrofitting and analysis often struggle to utilize a suitable yet precise equation. This study introduces a novel approach by presenting a firefly optimization algorithm (FOA) combined with an artificial neural network (ANN)—termed as FOA-ANN—as an advanced hybrid machine learning model. The primary objective is to predict the shear capacity of slender FRP reinforced concrete (FRP-RC) beams without stirrup. An extensive experimental database of slender FRP-RC beams without stirrup was compiled. Leveraging this database and the proposed hybrid method, a simple yet accurate closed-form equation for determining the shear capacity of slender FRP-RC beams without stirrup was formulated. Additionally, a selection of pre-existing equations was provided for comparison of accuracy. Results indicate that the suggested FOA-ANN equation offers a more accurate alternative, outperforming equations derived from CSA S806-12 and AASHTO LRFD. The FOA-ANN hybrid technique proves to be highly effective in predicting the shear capacity of slender FRP-RC beams without stirrup.

Prediction and optimization of surface waviness of WAAM components using a hybrid Rank-Gaussian PSO algorithm and ANN

Surface waviness is crucial for the quality of components produced via the wire and arc additive manufacturing (WAAM) process. This study presents a novel method for predicting surface waviness, employing an advanced model to optimize process parameter configurations using a combination of Rank-Gaussian particle swarm optimization (RGPSO) and an Artificial Neural Network (ANN). The novelty of this process is that the RGPSO not only optimizes the hyperparameters of the ANN model to enhance prediction performance, but also addresses surface waviness optimization. The RGPSO algorithm's optimization performance is evaluated using 23 benchmark functions, demonstrating competitiveness against nine comparative meta-heuristic algorithms. Experimental data on surface waviness from the literature are utilized to train, test and validate three different prediction models, including a standalone ANN model, a PSO optimized ANN (PSO-ANN) model, and an RGPSO optimized ANN (RGPSO-ANN) model. The results indicate that the developed RGPSO-ANN model achieves the highest accuracy in terms of the metrics RMSE (0.019), R (0.996), R20.990,MAE (0.013), RMSLE0.013,and MAPE (3.46 %). It performs better than the PSO-ANN model (RMSE 0.026, R 0.975, R20.982,MAE 0.019, RMSLE0.019,and MAPE 5.73 %), and better than the ANN (RMSE 0.046, R0.991, R20.944,MAE 0.034, RMSLE0.032 and MAPE 9.31 %). The RGPSO, PSO and other optimization algorithms are then applied to minimize the surface waviness of a WAAM component. RGPSO achieved the optimal value (0.1631 mm), which corresponds to a 12.6 % reduction compared to the best value obtained using PSO.

Machine learning models for daily net radiation prediction across different climatic zones of China

Net radiation (Rn), a critical component in land surface energy cycling, is calculated as the difference between net shortwave radiation and longwave radiation at the Earth’s surface and holds significant importance in crop models for precision agriculture management. In this study, we examined the performance of four machine learning models, including extreme learning machine (ELM), hybrid artificial neural networks with genetic algorithm models (GANN), generalized regression neural networks (GRNN), and random forests (RF), in estimating daily Rn at four representative sites across different climatic zones of China. The input variables included common meteorological factors such as minimum and maximum temperature, relative humidity, sunshine duration, and shortwave solar radiation. Model performance was assessed and compared using statistical parameters such as the correlation coefficient (R2), root mean square errors (RMSE), mean absolute errors (MAE), and Nash–Sutcliffe coefficient (NS). The results indicated that all models slightly underestimated actual Rn, with linear regression slopes ranging from 0.810 to 0.870 across different zones. The estimated Rn was found to be comparable to observed values in terms of data distribution characteristics. Among the models, the ELM and GANN demonstrated higher consistency with observed values, exhibiting R2 values ranging from 0.838 to 0.963 and 0.836 to 0.963, respectively, across varying climatic zones. These values surpassed those of the RF (0.809–0.959) and GRNN (0.812–0.949) models. Additionally, the ELM and GANN models showed smaller simulation errors in terms of RMSE, MAE, and NS across the four climatic zones compared to the RF and GRNN models. Overall, the ELM and GANN models outperformed the RF and GRNN models. Notably, the ELM model's faster computational speed makes it a strong recommendation for Rn estimates across different climatic zones of China.

Hybrid artificial neural network models for bearing capacity evaluation of a strip footing on sand based on Bolton failure criterion

This paper employs the Bolton failure criterion, incorporating strength-dilatancy relationships, to analyze the bearing capacity factor of a strip footing on dense sand. Utilizing finite element limit analysis (FELA) based on the lower and upper bound theorems, the study presents the results as average bound solutions. By using the Bolton model, the b parameter is first calibrated and found that it should be about 3.50 to align the ultimate bearing capacity (qu) from FELA to have a good agreement with that from experimental test results from previous studies. The influence of parameters relevant to the Bolton failure criterion is analysed, showing that an increase in relative density (DR) significantly affects the variation in the bearing capacity factor (Nγ) at higher Q values, while lower Q values inhibit dilatancy due to soil crushing. The width of the strip footing (B) has a decreasing effect on Nγ at higher Q values, and the unit weight (γ) changes minimally impact Nγ within the range of 16–22 kN/m3. Additionally, an increase in the critical state friction angle (ϕcv) consistently increases Nγ, highlighting its direct correlation with soil shear strength. A hybrid artificial neural network (ANN) model integrates machine learning with four optimization algorithms: Imperialist Competitive Algorithm (ICA), Ant Lion Optimization (ALO), Teaching Learning Based Optimization (TLBO), and New Self-Organizing Hierarchical Particle Swarm Optimizer with Jumping Time-Varying Acceleration Coefficients (NHPSO-JTVAC). Comparative rank analysis of hybrid ANN models based on the selection of the optimal number of hidden neurons demonstrates that the ANN-TLBO model excels in predicting the bearing capacity factor, achieving a score of 48. This conclusion is corroborated by an error heatmap matrix, which indicates a minimized percentage of error relative to other hybrid ANN models. Importance analysis identifies particle crushing strength (Q) as the most significant factor influencing the bearing capacity factor (Nγ).

Enhanced prediction and optimization of WEDM for titanium alloy (grade 5) with hybrid artificial neural network based meta-heuristics

Enhanced prediction and optimization of WEDM for titanium alloy (grade 5) with hybrid artificial neural network based meta-heuristics

Towards circular economy of wasted printed circuit boards of mobile phones fuelled by machine learning and robust mathematical optimization framework

Estimating the operating conditions using conventional process analysis techniques for the maximum metal extraction from the wasted printed circuit boards (WPCB) can provide sub-optimal solutions leading to the low yield of the process. In this paper, we present a closed-loop methodological framework built on machine learning and robust mathematical optimization technique, that offers the mathematical rigour, to determine the optimum operating conditions for the maximum Cu and Ni recovery from the WPCB. Alkali leaching based novel metals recovery process from the WPCB is designed, and the experiments are conducted to collect the data on the percentage recovery of Cu and Ni against the operating levels of the process input variables (ammonia concentration (NH3 conc. (g/L)), ammonium sulfate concentration ((NH4)2SO4 conc. (g/L)), H2O2 concentration (H2O2 conc. (M)), time (h), liquid to solid ratio (L/S ratio, (mL/g)), temperature (Temp. (°C)), and stirring speed (rpm)). The experimental data is deployed to construct the functional mapping between the nonlinear output variables of metals recovery process with the hyperdimensional input space through artificial neural network (ANN) based modelling algorithm – a powerful universal function approximator. Well-predictive ANN models for Cu and Ni recovery are developed having co-efficient of determination (R2) value more than 0.90. Partial derivative-based sensitivity analysis is then carried out to establish the order of the significance of the input variables that is backed by the domain knowledge, thus promotes the interpretability of the trained ANN models. The hybridization of ANN with NLP (nonlinear programming) framework is implemented for the determination of optimized operating conditions to extract maximum Cu and Ni under separate and combined model of metal extraction. The robustness of the determined solutions is verified, the determined optimized solutions for the metal recovery are validated in the lab, and the maximum metal recovery, i.e., 100 % Cu and 90 % Ni is extracted from the WPCB. This research demonstrates the effective utilization of ANN model-based robust optimization approach for the metal recovery from the WPCB that supports the circular economy for the metal extraction industry.

Fixed-Wing UAV Pose Estimation Using a Self-Organizing Map and Deep Learning

In many Unmanned Aerial Vehicle (UAV) operations, accurately estimating the UAV’s position and orientation over time is crucial for controlling its trajectory. This is especially important when considering the landing maneuver, where a ground-based camera system can estimate the UAV’s 3D position and orientation. A Red, Green, and Blue (RGB) ground-based monocular approach can be used for this purpose, allowing for more complex algorithms and higher processing power. The proposed method uses a hybrid Artificial Neural Network (ANN) model, incorporating a Kohonen Neural Network (KNN) or Self-Organizing Map (SOM) to identify feature points representing a cluster obtained from a binary image containing the UAV. A Deep Neural Network (DNN) architecture is then used to estimate the actual UAV pose based on a single frame, including translation and orientation. Utilizing the UAV Computer-Aided Design (CAD) model, the network structure can be easily trained using a synthetic dataset, and then fine-tuning can be done to perform transfer learning to deal with real data. The experimental results demonstrate that the system achieves high accuracy, characterized by low errors in UAV pose estimation. This implementation paves the way for automating operational tasks like autonomous landing, which is especially hazardous and prone to failure.

Development and application of a hybrid artificial neural network model for simulating future stream flows in catchments with limited in situ observed data

Development and application of a hybrid artificial neural network model for simulating future stream flows in catchments with limited <i>in situ</i> observed data

How Narcissism and Susceptibility to Emotional Contagion Affect Belief in Fake News on Social Media from a Dual Information Processing Perspective: A Hybrid SEM and ANN Approach

Objectives: To answer who believes in fake news and provide strategies to combat it, we examined how narcissism and susceptibility to emotional contagion influences belief in fake news on social media through heuristic and systematic processing; we also evaluated the moderating effect of media literacy. In addition, we ranked the relative importance of these factors to belief in fake news. Methods: We used a hybrid structural equation modeling (SEM) and artificial neural networks (ANN) approach to analyze data collected from 347 respondents in an online survey. Results: The SEM results showed that narcissism and susceptibility to emotional contagion positively influenced heuristic and systematic processing, thus positively influencing belief in fake news. Media literacy moderated the relationship between systematic processing and belief in fake news. Conclusion: The ANN results indicated that narcissism is a more critical factor for belief in fake news. ANN predicted belief in fake news with an accuracy of 99.9%.

Enhanced biosynthesis of coated silver nanoparticles using isolated bacteria from heavy metal soils and their photothermal-based antibacterial activity: integrating Response Surface Methodology (RSM) Hybrid Artificial Neural Network (ANN)-Genetic Algorithm (GA) strategies.

This study explores the biosynthesis of silver nanoparticles (AgNPs) using the Streptomyces tuirus S16 strain, presenting an eco-friendly alternative to mitigate the environmental and health risks of chemical synthesis methods. It focuses on optimizing medium culture conditions, understanding their physicochemical properties, and investigating their potential photothermal-based antibacterial application. The S16 strain was selected from soils contaminated with heavy metals to exploit its ability to produce diverse bioactive compounds. By employing the combination of Response Surface Methodology (RSM) and Artificial Neural Network (ANN)-Genetic Algorithm (GA) strategies, we optimized AgNPs synthesis, achieving an improvement of nearly 2.45 times the initial yield under specific conditions (Bennet's medium supplemented with glycerol [5g/L] and casamino-acid [3g/L] at 30°C for 72h). A detailed physicochemical characterization was conducted. Notably, the AgNPs were well dispersed, and a carbonaceous coating layer on their surface was confirmed using energy-dispersive X-ray spectroscopy. Furthermore, functional groups were identified using Fourier-transform infrared spectroscopy, which helped enhance the AgNPs' stability and biocompatibility. AgNPs also demonstrated efficient photothermal conversion under light irradiation (0.2 W/cm2), with temperatures increasing to 41.7°C, after 30min. In addition, treatment with light irradiation of E. coli K-12 model effectively reduced the concentration of AgNPs from 105 to 52.5µg/mL, thereby enhancing the efficacy of silver nanoparticles in contact with the E. coli K-12.

Computational intelligence for empirical modelling and optimization of methylene blue adsorption phenomena utilizing an activated carbon‐supported [Co(NH3)6]Cl3 complex

AbstractThe study focuses on the efficiency of hexaamminecobalt (III) chloride (HACo, [Co(NH3)6]Cl3) immobilized on activated carbon for removing methylene blue (MB) from water solutions. The primary objective of this study was to assess the sorption performance of HACo immobilized on activated carbon in removing MB from water solutions. Additionally, predictive models were developed to optimize the MB removal percentage. Lastly, the study aimed to determine the optimal conditions for achieving maximum MB removal. Samples were characterized using scanning electron microscopy. Batch sorption experiments were conducted to analyze the impact of MB concentration, adsorbent mass, pH, temperature, and contact time. Predictive models were built using multiple linear regression and neural network techniques, specifically artificial neural networks (ANN) and hybrid ANN–particle swarm optimization (ANN‐PSO). The PSO‐ANN model with a single hidden layer of eight neurons trained using the Levenberg–Marquardt algorithm demonstrated high accuracy in predicting MB removal percentage, with mean absolute percentage error (MAPE) = 0.083788, root mean square error (RMSE) = 0.11441, and R2 = 0.99693. The MB adsorption process followed a mono‐layer with one energy model and a pseudo‐first‐order kinetic model. Optimization using the genetic algorithm revealed that the maximum MB removal percentage of 99.56% is achievable at an MB concentration of 9.36 mg/L, adsorbent mass of 15.72 mg, and temperature of 311.2 K. The study confirms the effectiveness of HACo immobilized on activated carbon for MB removal. The PSO‐ANN predictive model proved superior in accuracy compared to empirical models. Optimization results provide the optimal conditions for maximizing MB removal, offering valuable insights for practical applications.

Wavelet–ANN hybrid model evaluation in seepage prediction in nonhomogeneous earthen dams

ABSTRACT In this study, novel methods such as wavelet–artificial neural network hybrid models and artificial neural network models were used to predict seepage from the Zonouz earthen dam. The dataset consisted of 972 piezometric data points. Statistical fitting methods such as root mean squared error, determination coefficient, scatter plots, and data distribution diagrams were used to evaluate the results. The findings indicated that the wavelet–artificial neural network hybrid model was more accurate than the artificial neural network model. Specifically, during training, the wavelet–artificial neural network hybrid model had determination coefficients and root mean squared errors of 0.820, 0.680, 743.39, and 792.52, while the artificial neural network model had 0.700, 0.600, 426.39, and 131.45. Similarly, during validation, the wavelet–artificial neural network hybrid model had determination coefficients and root mean squared errors of 0.700, 0.600, 426.39, and 131.45, while the artificial neural network model had 0.823, 0.680, 743.39, and 792.52. Therefore, the wavelet–artificial neural network hybrid model can be proposed as a precise method for predicting seepage in earthen dams and is more accurate than the artificial neural network model. This study highlights the importance of preventing dam failures and using advanced modeling techniques for better predictions and preventive measures.

Development of ANN-based metaheuristic models for the study of the durability characteristics of high-volume fly ash self-compacting concrete with silica fume

The construction of durable and sustainable infrastructure requires the use of industrial byproducts such as fly ash (FA) and silica fume (SF) to enhance strength and durability. This study introduces novel machine learning models to forecast the results of rapid chloride penetration test (RCPT) for self-compacting concrete (SCC) containing high volumes of FA and SF. This study assessed the effects of supplementary cementitious materials (SCMs) and elevated temperature curing on the RCPT outcomes for SCC. Various metaheuristic algorithms including teaching–learning-based optimization (TLBO), ant colony optimization (ACO), the imperialist competitive algorithm (ICA), and shuffled complex evolution (SCE)—optimize the learning rate, weights, and biases of artificial neural network (ANN) models. A dataset of 360 experimental RCPT data points with seven input parameters was used to train and test the hybrid models. The accuracy of these models was assessed using eight performance indices, and the results were further analyzed through rank analysis, scatter plots, and error matrices. The training and testing sets for the AI models, specifically ANN-TLBO, exhibit a strong correlation between the experimental and predicted RCPT values, with R2 values of 0.9962 for training and 0.9676 for testing, compared to the R2 values of the other proposed models. Consequently, the results of this study suggest that the ANN-TLBO model is the optimal hybrid ANN model for predicting RCPT values in SCC. Verified experimental results and external validation indicate that the ANN-TLBO model is an effective alternative for accurately predicting real-time RCPT in SCC.

Terahertz Nondestructive Measurement of Heat Radiation Performance of Thermal Barrier Coatings Based on Hybrid Artificial Neural Network

Effective control of the micro- and nanostructure of thermal barrier coatings is essential to enhance the thermal radiation performance of the coating, which helps to determine the remaining service life of the coating. This paper proposed a method to measure the radiation properties of thermal barrier coatings by terahertz nondestructive testing technique, using APS-prepared thermal barrier coatings as the object of study. Radiative properties were a comprehensive set of properties characterized by the diffuse reflectance, transmittance, and absorptance of the thermal barrier coating. The coating data in actual service were obtained by scanning electron microscopy and metallographic experiments, and the data were used as the simulation model critical value. The terahertz time-domain simulation data of coatings with different microstructural features were obtained using the finite-different time-domain (FDTD) method. In simulating the real test signals, white noise with a signal-to-noise ratio of 20 dB was added, and fast Fourier transform (FFT), short-time Fourier transform (STFT), and wavelet transform (WT) were used to reduce the noise and compare their noise reduction effects. Different machine learning methods were used to build the model, including support vector machine algorithm (SVM) and k-nearest neighbor algorithm (KNN). The principal component algorithm (PCA) was used to reduce the dimensionality of terahertz time-domain data, and the SVM algorithm and KNN algorithm were optimized using the particle swarm optimization algorithm (PSO) and the ant colony optimization algorithm (ACO), respectively, to improve the robustness of the system. The K-fold cross-validation method was used to construct the model to improve the adaptability of the model. It could be clearly seen that the novel hybrid PCA-ACO-SVM model had superior prediction performance. Finally, this work proposed a novel, convenient, nondestructive, online, safe and highly accurate method for measuring the radiation performance of thermal barrier coatings, which could be used for the judgment of the service life of thermal barrier coatings.

Enhancement of Power Quality through the Implementation of a Hybrid Artificial Intelligence Model within Solar-Wind Energy Systems

The generation of electricity is significantly assisted by hybrid solar-wind power systems, which also play a crucial role in the advancement of intelligent grids. Furthermore, the integration of wind and solar energy storage control systems, in conjunction with energy markets, has rendered the electricity grid more economically feasible. To meet the growing demand for electricity, hybrid renewable energy systems connected to microgrids consist of substantial identifying elements. The issue of harmonic distortion in microgrids arising from nonlinear loads is a fundamental area of research. Understanding the impact of microgrids on power quality is also of great importance. This study focuses on enhancing power quality in solar-wind hybrid systems by incorporating emerging Artificial Intelligence (AI) methodologies. The proposed approach comprises two main components: (i) detection of distortions caused by voltage fluctuations and (ii) improvement of power quality through an AI-based control system. Initially, power distortions are identified and eliminated using the Enhanced Kalman Filter (EKF) algorithm. A Hybrid Artificial Neural Network with Fuzzy Intelligence (HANFI) model is then developed based on this power data. This model integrates two prominent neural network architectures with fuzzy systems. Experimental validation of the system is conducted using MATLAB, which facilitates the simulation of hybrid energy systems.

Superior decomposition of xenobiotic RB5 dye using three-dimensional electrochemical treatment: Response surface methodology modelling, artificial intelligence, and machine learning-based optimisation approaches

The highly efficient electrochemical treatment technology for dye-polluted wastewater is one of hot research topics in industrial wastewater treatment. This study reported a three-dimensional electrochemical treatment process integrating graphite intercalation compound (GIC) adsorption, direct anodic oxidation, and ·OH oxidation for decolourising Reactive Black 5 (RB5) from aqueous solutions. The electrochemical process was optimised using the novel progressive central composite design–response surface methodology (CCD–NPRSM), hybrid artificial neural network–extreme gradient boosting (hybrid ANN–XGBoost), and classification and regression trees (CART). CCD–NPRSM and hybrid ANN–XGBoost were employed to minimise errors in evaluating the electrochemical process involving three manipulated operational parameters: current density, electrolysis (treatment) time, and initial dye concentration. The optimised decolourisation efficiencies were 99.30%, 96.63%, and 99.14% for CCD–NPRSM, hybrid ANN–XGBoost, and CART, respectively, compared to the 98.46% RB5 removal rate observed experimentally under optimum conditions: approximately 20 mA/cm2 of current density, 20 min of electrolysis time, and 65 mg/L of RB5. The optimised mineralisation efficiencies ranged between 89% and 92% for different models based on total organic carbon (TOC). Experimental studies confirmed that the predictive efficiency of optimised models ranked in the descending order of hybrid ANN–XGBoost, CCD–NPRSM, and CART. Model validation using analysis of variance (ANOVA) revealed that hybrid ANN–XGBoost had a mean squared error (MSE) and a coefficient of determination (R2) of approximately 0.014 and 0.998, respectively, for the RB5 removal efficiency, outperforming CCD–NPRSM with MSE and R2 of 0.518 and 0.998, respectively. Overall, the hybrid ANN–XGBoost approach is the most feasible technique for assessing the electrochemical treatment efficiency in RB5 dye wastewater decolourisation.

Spiking NeRF: Representing the Real-World Geometry by a Discontinuous Representation

A crucial reason for the success of existing NeRF-based methods is to build a neural density field for the geometry representation via multiple perceptron layers (MLPs). MLPs are continuous functions, however, real geometry or density field is frequently discontinuous at the interface between the air and the surface. Such a contrary brings the problem of unfaithful geometry representation. To this end, this paper proposes spiking NeRF, which leverages spiking neurons and a hybrid Artificial Neural Network (ANN)-Spiking Neural Network (SNN) framework to build a discontinuous density field for faithful geometry representation. Specifically, we first demonstrate the reason why continuous density fields will bring inaccuracy. Then, we propose to use the spiking neurons to build a discontinuous density field. We conduct a comprehensive analysis for the problem of existing spiking neuron models and then provide the numerical relationship between the parameter of the spiking neuron and the theoretical accuracy of geometry. Based on this, we propose a bounded spiking neuron to build the discontinuous density field. Our method achieves SOTA performance. The source code and the supplementary material are available at https://github.com/liaozhanfeng/Spiking-NeRF.

Solar desalination system for fresh water production performance estimation in net-zero energy consumption building: A comparative study on various machine learning models.

This study employs diverse machine learning models, including classic artificial neural network (ANN), hybrid ANN models, and the imperialist competitive algorithm and emotional artificial neural network (EANN), to predict crucial parameters such as fresh water production and vapor temperatures. Evaluation metrics reveal the integrated ANN-ICA model outperforms the classic ANN, achieving a remarkable 20% reduction in mean squared error (MSE). The emotional artificial neural network (EANN) demonstrates superior accuracy, attaining an impressive 99% coefficient of determination (R2) in predicting freshwater production and vapor temperatures. The comprehensive comparative analysis extends to environmental assessments, displaying the solar desalination system's compatibility with renewable energy sources. Results highlight the potential for the proposed system to conserve water resources and reduce environmental impact, with a substantial decrease in total dissolved solids (TDS) from over 6,000 ppm to below 50 ppm. The findings underscore the efficacy of machine learning models in optimizing solar-driven desalination systems, providing valuable insights into their capabilities for addressing water scarcity challenges and contributing to the global shift toward sustainable and environmentally friendly water production methods.

Experimental analysis of forming forces in incremental forming and its prediction by AI-based methods

Single point incremental forming (SPIF) is an emerging approach to manufacture the user-specific parts of greater strength economically without involving dedicated tools and dies. In this study, peak deforming loads have been measured and estimated in order to determine the size and capacity of forming machinery for manufacturing components, using the SPIF process, for designed process conditions on AA7075-O sheets. Estimation of maximum deforming loads has been accomplished with the help of hybrid artificial neural network (HANN) approach by taking experimental load values as the input dataset. The load values, estimated by HANN approach, have been compared with the load values estimated by two state-of-art regression approaches, that is, Support Vector Machine (SVM) and Gaussian Process Regression (GPR). Results show that the regression methods (SVM and GPR) are outperformed by the HANN model with an accuracy of 99.80%. HANN model estimated force values very close to experimental results. The forming forces were found to be greater when the flat-end tools were used as a forming agent in place of hemispherical-end tool. The proposed study would help the researchers and scientists to assess the capacity the machines used in SPIF process to prepare a particular sheet-part and to prevent the failure of hardware during the SPIF process.

Leveraging hybrid ANN–AHP to optimize cement industry average inventory levels

In recent years, inventory has been critical due to the production cost and overstock risk related to the expiration date and the fluctuation price risk. This study's minimization of overstock and price fluctuation in the warehouse used a hybridized artificial neural network (ANN) and analytical hierarchy process (AHP) to produce an optimum model. The variables, such as average demand, reorder point, order quantity, factor service level, safety stock, and average inventory level, were used to obtain the optimal condition of the average inventory levels to maximize the profit. Then, the type of inventory system that guarantees the minimum risks in managing the inventory would be selected. The result shows that the data has a mean of 39.2 units, and the standard deviation (SD) was 12.9. This means that the order quantity is 20.2 units, the average inventory level is 57.3, and the average demand is 39. These conditions used the factor z, which is 97% service level. This study concludes that the optimum average inventory level is 91 units, the order quantity is 11 units with the maximum average profit is $1098, and the peak fluctuation condition maximum profit is $1463 when the average inventory level is 7.3, and the inventory policy system used to minimize the risk is the continuous review policy type. The study could be beneficial to reduce production costs and enhance overall profitability and operational efficiency in the sector by mitigating the risks associated with excessive inventory and price volatility while also minimizing the potential for expired inventory.