Apparent Melting Temperature Research Articles

Engineering improved thermostability of the GH11 xylanase from Neocallimastix patriciarum via computational library design.

Xylanases, which cleave the β-1,4-glycosidic bond between xylose residues to release xylooligosaccharides (XOS), are widely used as food additives, animal feeds, and pulp bleaching agents. However, the thermally unstable nature of xylanases would hamper their industrial application. In this study, we used in silico design in a glycoside hydrolase family (GH) 11 xylanase to stabilize the enzyme. A combination of the best mutations increased the apparent melting temperature by 14°C and significantly enhanced thermostability and thermoactivation. The variant also showed an upward-shifted optimal temperature for catalysis without compromising its activity at low temperatures. Moreover, a 10-fold higher XOS production yield was obtained at 70°C, which compensated the low yield obtained with the wild-type enzyme. Collectively, the variant constructed by the computational strategy can be used as an efficient biocatalyst for XOS production at industrially viable conditions.

Enhancing the Thermostability of Rhizomucor miehei Lipase with a Limited Screening Library by Rational-Design Point Mutations and Disulfide Bonds.

Rhizomucor miehei lipase (RML), as a kind of eukaryotic protein catalyst, plays an important role in the food, organic chemical, and biofuel industries. However, RML retains its catalytic activity below 50°C, which limits its industrial applications at higher temperatures. Soluble expression of this eukaryotic protein in Escherichia coli not only helps to screen for thermostable mutants quickly but also provides the opportunity to develop rapid and effective ways to enhance the thermal stability of eukaryotic proteins. Therefore, in this study, RML was engineered using multiple computational design methods, followed by filtration via conservation analysis and functional region assessment. We successfully obtained a limited screening library (only 36 candidates) to validate thermostable single point mutants, among which 24 of the candidates showed higher thermostability and 13 point mutations resulted in an apparent melting temperature ([Formula: see text]) of at least 1°C higher. Furthermore, both of the two disulfide bonds predicted from four rational-design algorithms were further introduced and found to stabilize RML. The most stable mutant, with T18K/T22I/E230I/S56C-N63C/V189C-D238C mutations, exhibited a 14.3°C-higher [Formula: see text] and a 12.5-fold increase in half-life at 70°C. The catalytic efficiency of the engineered lipase was 39% higher than that of the wild type. The results demonstrate that rationally designed point mutations and disulfide bonds can effectively reduce the number of screened clones to enhance the thermostability of RML.IMPORTANCER. miehei lipase, whose structure is well established, can be widely applied in diverse chemical processes. Soluble expression of R. miehei lipase in E. coli provides an opportunity to explore efficient methods for enhancing eukaryotic protein thermostability. This study highlights a strategy that combines computational algorithms to predict single point mutations and disulfide bonds in RML without losing catalytic activity. Through this strategy, an RML variant with greatly enhanced thermostability was obtained. This study provides a competitive alternative for wild-type RML in practical applications and further a rapid and effective strategy for thermostability engineering.

Experimental Protocols for Generating Focused Mutant Libraries and Screening for Thermostable Proteins.

Many proteins are rapidly deactivated when exposed to high or even ambient temperatures. This cannot only impede the study of a particular protein, but also is one of the major reasons why enzyme catalysis is still widely unable to compete with established chemical processes. Furthermore, differences in protein stability are a challenge in synthetic biology, when individual modules prove to be incompatible. The targeted stabilization of proteins can overcome these hurdles, and protein engineering techniques are more and more reliably supported by computational chemistry tools. Accordingly, algorithms to predict the differences in folding energy of a mutant compared to the wild-type, ΔΔGfold, are used in the highly successful FRESCO workflow. The resulting single mutant prediction library consists typically of a few hundred amino acid exchanges, and after combining the most successful hits we so far obtained stabilized mutants which exhibited increases in apparent melting temperature of 20-35°C and showed vastly increased half-lives, as well as resistance to cosolvents. Here, we report a detailed protocol to generate these mutant libraries experimentally, covering the entire workflow from primer design, through mutagenesis, protein production and screening, to mutation combination strategies. The individual parts of the method are furthermore applicable to many other scenarios besides protein stabilization, and these protocols are valuable for any project requiring individual or semi high-throughput site-directed mutagenesis, protein expression and purification, or generation of mutant combination libraries.

Engineering stability in NADPH oxidases: A common strategy for enzyme production.

NADPH oxidases (NOXs) are membrane enzymes whose sole function is the generation of reactive oxygen species. Humans have seven NOX isoenzymes that feature distinct functions in immune response and cell signaling but share the same catalytic core comprising a FAD-binding dehydrogenase domain and a heme-binding transmembrane domain. We previously described a mutation that stabilizes the dehydrogenase domain of a prokaryotic homolog of human NOX5. The thermostable mutant exhibited a large 19 °C increase in the apparent melting temperature (app Tm) and a much tighter binding of the FAD cofactor, which allowed the crystallization and structure determination of the domain holo-form. Here, we analyze the transferability of this mutation onto prokaryotic and eukaryotic full-length NOX enzymes. We found that the mutation exerts a significative stabilizing effect on the full-length NOX5 from both Cylindrospermum stagnale (app Tm increase of 8 °C) and Homo sapiens (app ΔTm of 2 °C). Enhanced thermal stability resulted in more homogeneous preparations of the bacterial NOX5 with less aggregation problems. Moreover, we also found that the mutation increases the overall expression of recombinant human NOX4 and NOX5 in mammalian cells. Such a 2-5-fold increase is mainly due to the lowered cell toxicity, which leads to higher biomasses. Because of the high sequence identity of the catalytic core within this family of enzymes, this strategy can be a general tool to boost the production of all NOXs.

Absorption and Emission Spectroscopic Investigation of Thermal Dynamics and Photo-Dynamics of the Rhodopsin Domain of the Rhodopsin-Guanylyl Cyclase from the Nematophagous Fungus Catenaria anguillulae.

The rhodopsin-guanylyl cyclase from the nematophagous fungus Catenaria anguillulae belongs to a recently discovered class of enzymerhodopsins and may find application as a tool in optogenetics. Here the rhodopsin domain CaRh of the rhodopsin-guanylyl cyclase from Catenaria anguillulae was studied by absorption and emission spectroscopic methods. The absorption cross-section spectrum and excitation wavelength dependent fluorescence quantum distributions of CaRh samples were determined (first absorption band in the green spectral region). The thermal stability of CaRh was studied by long-time attenuation measurements at room temperature (20.5 °C) and refrigerator temperature of 3.5 °C. The apparent melting temperature of CaRh was determined by stepwise sample heating up and cooling down (obtained apparent melting temperature: 62 ± 2 °C). The photocycle dynamics of CaRh was investigated by sample excitation to the first inhomogeneous absorption band of the CaRhda dark-adapted state around 590 nm (long-wavelength tail), 530 nm (central region) and 470 nm (short-wavelength tail) and following the absorption spectra development during exposure and after exposure (time resolution 0.0125 s). The original protonated retinal Schiff base PRSBall-trans in CaRhda photo-converted reversibly to protonated retinal Schiff base PRSBall-trans,la1 with restructured surroundings (CaRhla1 light-adapted state, slightly blue-shifted and broadened first absorption band, recovery to CaRhda with time constant of 0.8 s) and deprotonated retinal Schiff base RSB13-cis (CaRhla2 light-adapted state, first absorption band in violet to near ultraviolet spectral region, recovery to CaRhda with time constant of 0.35 s). Long-time light exposure of light-adapted CaRhla1 around 590, 530 and 470 nm caused low-efficient irreversible degradation to photoproducts CaRhprod. Schemes of the primary photocycle dynamics of CaRhda and the secondary photocycle dynamics of CaRhla1 are developed.

Novel thermostable amine transferases from hot spring metagenomes.

Hot spring metagenomes, prepared from samples collected at temperatures ranging from 55 to 95°C, were submitted to an in silico screening aimed at the identification of novel amine transaminases (ATAs), valuable biocatalysts for the preparation of optically pure amines. Three novel (S)-selective ATAs, namely Is3-TA, It6-TA, and B3-TA, were discovered in the metagenome of samples collected from hot springs in Iceland and in Italy, cloned from the corresponding metagenomic DNAs and overexpressed in recombinant form in E. coli. Functional characterization of the novel ATAs demonstrated that they all possess a thermophilic character and are capable of performing amine transfer reactions using a broad range of donor and acceptor substrates, thus suggesting a good potential for practical synthetic applications. In particular, the enzyme B3-TA revealed to be exceptionally thermostable, retaining 85% of activity after 5days of incubation at 80°C and more than 40% after 2weeks under the same condition. These results, which were in agreement with the estimation of an apparent melting temperature around 88°C, make B3-TA, to the best of our knowledge, the most thermostable natural ATA described to date. This biocatalyst showed also a good tolerance toward different water-miscible and water-immiscible organic solvents. A detailed inspection of the homology-based structural model of B3-TA showed that the overall active site architecture of mesophilic (S)-selective ATAs was mainly conserved in this hyperthermophilic homolog. Additionally, a subfamily of B3-TA-like transaminases, mostly uncharacterized and all from thermophilic microorganisms, was identified and analyzed in terms of phylogenetic relationships and sequence conservation.

Disulfide bridges as essential elements for the thermostability of lytic polysaccharide monooxygenase LPMO10C from Streptomyces coelicolor.

Lytic polysaccharide monooxygenases (LPMOs) are crucial components of cellulase mixtures but their stability has not yet been studied in detail, let alone been engineered for industrial applications. In this work, we have evaluated the importance of disulfide bridges for the thermodynamic stability of Streptomyces coelicolor LPMO10C. Interestingly, this enzyme was found to retain 34% of its activity after 2-h incubation at 80°C while its apparent melting temperature (Tm) is only 51°C. When its three disulfide bridges were broken, however, irreversible unfolding occurred and no residual activity could be detected after a similar heat treatment. Based on these findings, additional disulfide bridges were introduced, as predicted by computational tools (MOdelling of DIsulfide bridges in Proteins (MODiP) and Disulfide by Design (DbD)) and using the most flexible positions in the structure as target sites. Four out of 16 variants displayed an improvement in Tm, ranging from 2 to 9°C. Combining the positive mutations yielded additional improvements (up to 19°C) but aberrant unfolding patterns became apparent in some cases, resulting in a diminished capacity for heat resistance. Nonetheless, the best variant, a combination of A143C-P183C and S73C-A115C, displayed a 12°C increase in Tm and was able to retain and was able to retain no less than 60% of its activity after heat treatment.

Pronounced effect of hapten binding on thermal stability of an anti-(4-hydroxy-3-nitrophenyl)acetyl antibody possessing a glycine residue at position 95 of the heavy chain.

Immune response to T-cell-dependent antigens is highly dynamic; several B-cell clones responsible for antibody production appear alternately during immunization. It was previously shown that at least two-types of antibodies are secreted after immunization with (4-hydroxy-3-nitrophenyl)acetyl (NP); one has Tyr and another has Gly at position 95 of the heavy chain (referred to as Tyr95- and Gly95-type). The former appeared at an early stage, while the latter appeared at a late stage, i.e., after secondary immunization, although Fv domains of these antibodies were encoded by same genes of variable heavy and light chains. We examined whether any biophysical properties of antigen-combing sites relate to this shift in B-cell clones by preparing single-chain Fv (scFv). Thermodynamic and kinetic parameters of the interaction of scFv with various haptens are in accordance with those of intact antibodies, indicating that scFvs are appropriate models for the study on structure and function of antibodies. Next, we measured thermal stability of scFvs using differential scanning calorimetry and found that the apparent melting temperature of free Tyr95-type was 64-66°C,while that of Gly95-type was 47-48°C, indicating that the latter was highly unstable. However, Gly95-type greatly gained thermal stability because of hapten binding. We discussed the relationship between thermal stability resulted by hapten binding and dynamism of antibody response during immunization.

A robust cosolvent-compatible halohydrin dehalogenase by computational library design.

To improve the applicability of halohydrin dehalogenase as a catalyst for reactions in the presence of organic cosolvents, we explored a computational library design strategy (Framework for Rapid Enzyme Stabilization by Computational libraries) that involves discovery and in silico evaluation of stabilizing mutations. Energy calculations, disulfide bond predictions and molecular dynamics simulations identified 218 point mutations and 35 disulfide bonds with predicted stabilizing effects. Experiments confirmed 29 stabilizing point mutations, most of which were located in two distinct regions, whereas introduction of disulfide bonds was not effective. Combining the best mutations resulted in a 12-fold mutant (HheC-H12) with a 28°C higher apparent melting temperature and a remarkable increase in resistance to cosolvents. This variant also showed a higher optimum temperature for catalysis while activity at low temperature was preserved. Mutant H12 was used as a template for the introduction of mutations that enhance enantioselectivity or activity. Crystal structures showed that the structural changes in the H12 mutant mostly agreed with the computational predictions and that the enhanced stability was mainly due to mutations that redistributed surface charges and improved interactions between subunits, the latter including better interactions of water molecules at the subunit interfaces.

Preparation and characterization of polyethylene glycol (PEG) hydrogel as shape-stabilized phase change material

A kind of PEG8000 hydrogels as shape-stabilized phase change materials (SSPCMs) were prepared by using a simple sol-gel technique. Their thermal characteristics were studied under the modified mass ratio of PEG and water. The optimized PEG hydrogel (PEGH) was placed at high temperature of 70°C to remove excess liquid water. This temperature was less than the apparent melting temperature (74±1°C) but over its phase transition temperature of about 9°C. Obtained PEG gel displayed an excellent thermal energy density of 154.2J/g, and the value was twice that of reported form-stable composite PCM in literature. Therefore, it can be remarkably noted that the PEG hydrogel provides a new way for the preparation of SSPCMs, and has an important potential for heating/cooling applications in buildings.

Insights into cellulase-lignin non-specific binding revealed by computational redesign of the surface of green fluorescent protein.

Biological-mediated conversion of pretreated lignocellulosic biomass to biofuels and biochemicals is a promising avenue toward energy sustainability. However, a critical impediment to the commercialization of cellulosic biofuel production is the high cost of cellulase enzymes needed to deconstruct biomass into fermentable sugars. One major factor driving cost is cellulase adsorption and inactivation in the presence of lignin, yet we currently have a poor understanding of the protein structure-function relationships driving this adsorption. In this work, we have systematically investigated the role of protein surface potential on lignin adsorption using a model monomeric fluorescent protein. We have designed and experimentally characterized 16 model protein variants spanning the physiological range of net charge (-24 to +16 total charges) and total charge density (0.28-0.40 charges per sequence length) typical for natural proteins. Protein designs were expressed, purified, and subjected to in silico and in vitro biophysical measurements to evaluate the relationship between protein surface potential and lignin adsorption properties. The designs were comparable to model fluorescent protein in terms of thermostability and heterologous expression yield, although the majority of the designs unexpectedly formed homodimers. Protein adsorption to lignin was studied at two different temperatures using Quartz Crystal Microbalance with Dissipation Monitoring and a subtractive mass balance assay. We found a weak correlation between protein net charge and protein-binding capacity to lignin. No other single characteristic, including apparent melting temperature and 2nd virial coefficient, showed correlation with lignin binding. Analysis of an unrelated cellulase dataset with mutations localized to a family I carbohydrate-binding module showed a similar correlation between net charge and lignin binding capacity. Overall, our study provides strategies to identify highly active, low lignin-binding cellulases by either rational design or by computational screening genomic databases. Biotechnol. Bioeng. 2017;114: 740-750. © 2016 Wiley Periodicals, Inc.

Expression and characterization of a thermostable organic solvent-tolerant laccase from Bacillus licheniformis ATCC 9945a

Bacterial laccases have proven advantages over fungal and plant counterparts in terms of wider pH optimum, higher stability and broader biocatalytic scope. In this work, Bacillus licheniformis ATCC 9945a laccase is produced heterologously in Escherichia coli. Produced laccase exhibits remarkably high temperature optimum at 90°C and possess significant thermostability and resistance to inactivation by organic solvents. Laccase has an apparent melting temperature of 79°C at pH 7.0 and above 70°C in range of pH 5.0–8.0, while having half-life of 50min at 70°C. Presence of 10% organic solvents such as acetonitrile, dimethylformamide, dimethylsulfoxide or methanol reduces melting temperature to 45–52°C but activity remains practically unimpaired. With 50% of acetonitrile and methanol laccase retained ∼40% of initial activity. EDTA and 300mM sodium-chloride have positive effect on activity. Enzyme is active on syringaldazine, ABTS, phenols, amines, naphthol, lignin and lignin model compounds and mediates CC bond formation via oxidative coupling after one electron oxidation of phenolic group. Successful polymerization of 2-naphthol was achieved with 77% conversion of 250mg/L 2-naphtol in only 15min which may further expand substrate scope of this enzyme towards polymer production and/or xenobiotics removal for environmental applications.

Thermostabilization of the Human Endothelin Type B Receptor

The peptide hormone endothelin, produced by the vascular endothelium, is involved in several physiological functions, including maintenance of vascular tone and humoral homeostasis. Endothelin transmits signals through the endothelin receptor, a G-protein-coupled receptor. Structural studies of the endothelin type B receptor (ETBR) have been unsuccessful due to its structural flexibility and instability in detergent-solubilized solution. To overcome these problems, we explored thermostabilization of human ETBR by establishing an ETBR expression system in Escherichia coli, followed by systematic alanine scanning mutagenesis. Among 297 point mutations, 11 thermostabilizing residues were selected and further mutated to other amino acids. The thermostability indices of these residues, represented by the ratios of endothelin-1 (ET-1) binding activities with or without heat treatment at 27°C for 30min in a ligand-free form, were compared. The ligand affinity and apparent melting temperature (Tm) of the five most thermostable mutants, R124Y, D154A, K270A, S342A, and I381A, were then examined. The apparent Tm of three single mutants, R124Y, D154A, and K270A, was approximately 7°C higher than that of the wild type. The apparent Tm value of a combination of the five residues, named the Y5 ETBR mutant, was 17°C higher than that of the wild type. The Y5 ETBR mutant exhibited an affinity for ET-1 and activated Gq similar to the wild type. Further investigation of the pharmacological properties affected by combinatorial mutations of ET-1, ET-3, TxET-1, and K8794 suggested that Y5 ETBR is highly suitable for representing a ligand-free form of ETBR and is potentially applicable for studying an ET-1-bound form.

Obtaining a mutant of Bacillus amyloliquefaciens xylanase A with improved catalytic activity by directed evolution

This study aimed to obtain xylanase exhibiting improved enzyme properties to satisfy the requirements for industrial applications. The baxA gene encoding Bacillus amyloliquefaciens xylanase A was mutated by error-prone touchdown PCR. The mutant, pCbaxA50, was screened from the mutant library by using the 96-well plate high-throughput screening method. Sequence alignment revealed the identical mutation point S138T in xylanase (reBaxA50) produced by the pCbaxA50. The specific activity of the purified reBaxA50 was 9.38U/mg, which was 3.5 times higher than that of its parent expressed in Escherichia coli BL21 (DE3), named reBaxA. The optimum temperature of reBaxA and reBaxA50 were 55°C and 50°C, respectively. The optimum pH of reBaxA and reBaxA50 were pH 6 and pH 5, respectively. Moreover, reBaxA50 was more stable than reBaxA under thermal and extreme pH treatment. The half-life at 60°C and apparent melting temperature of reBaxA50 were 9.74min and 89.15°C, respectively. High-performance liquid chromatography showed that reBaxA50 released xylooligosaccharides from oat spelt, birchwood, and beechwood xylans, with xylotriose as the major product; beechwood xylan was also the most thoroughly hydrolyzed. This study demonstrated that the S138T mutation possibly improved the catalytic activity and thermostability of reBaxA50.

Thermostabilization of the Human Serotonin Transporter in an Antidepressant-Bound Conformation.

Serotonin is a ubiquitous chemical transmitter with particularly important roles in the gastrointestinal, cardiovascular and central nervous systems. Modulation of serotonergic signaling occurs, in part, by uptake of the transmitter by the serotonin transporter (SERT). In the brain, SERT is the target for numerous antidepressants including tricyclic antidepressants and selective serotonin reuptake inhibitors (SSRIs). Despite the importance of SERT in human physiology, biochemical, biophysical and high-resolution structural studies have been hampered due to the instability of SERT in detergent micelles. To identify a human SERT (hSERT) construct suitable for detailed biochemical and structural studies, we developed an efficient thermostability screening protocol and rapidly screened 219 mutations for thermostabilization of hSERT in complex with the SSRI paroxetine. We discovered three mutations—Y110A, I291A and T439S –that, when combined into a single construct, deemed TS3, yielded a hSERT variant with an apparent melting temperature (Tm) 19°C greater than that of the wild-type transporter, albeit with a loss of transport activity. Further investigation yielded a double mutant—I291A and T439S—defined as TS2, with a 12°C increase in Tm and retention of robust transport activity. Both TS2 and TS3 were more stable in short-chain detergents in comparison to the wild-type transporter. This thermostability screening protocol, as well as the specific hSERT variants, will prove useful in studies of other integral membrane receptors and transporters and in the investigation of structure and function relationships in hSERT.

Photo-dynamics of photoactivated adenylyl cyclase TpPAC from the spirochete bacterium Turneriella parva strain HT

The photoactivated adenylyl cyclase TpPAC from the spirochete bacterium Turneriella parva was synthesized and the purified recombinant protein was characterized by biochemical and optical spectroscopic methods. TpPAC consists of a BLUF domain (BLUF=Blue Light sensor Using Flavin) and an adenylyl cyclase homology domain (CHD). A light induced cAMP cyclase activity of≈53.3nmolmg−1min−1 was measured while in the dark the cyclase activity was approximately a factor of 240 lower. The photo-cycling dynamics of the BLUF domain of TpPAC was studied by absorption spectra, fluorescence quantum distribution, and fluorescence lifetime measurements. The quantum efficiency of BLUF domain signaling state formation was found to be ϕs≈0.59. A three-component exponential recovery of the signaling state to the receptor state was observed with the time constants τrec,1=4.8s, τrec,2=34.2s, and τrec,3=293s at 21.3°C. The protein thermal stability was studied by stepwise sample heating and cooling. An apparent TpPAC melting temperature of ϑm≈46°C was determined. The photo-degradation of TpPAC in the signaling state was studied by prolonged intense light exposure at 455nm. An irreversible flavin photo-degradation was observed with quantum yield ϕD≈8.7×10−6.

Increased Fab thermoresistance via VH-targeted directed evolution.

Antibody aggregation is frequently mediated by the complementarity determining regions within the variable domains and can significantly decrease purification yields, shorten shelf-life and increase the risk of anti-drug immune responses. Aggregation-resistant antibodies could offset these risks; accordingly, we have developed a directed evolution strategy to improve Fab stability. A Fab-phage display vector was constructed and the VH domain targeted for mutagenesis by error-prone PCR. To enrich for thermoresistant clones, the resulting phage library was transiently heated, followed by selection for binding to an anti-light chain constant domain antibody. Five unique variants were identified, each possessing one to three amino acid substitutions. Each engineered Fab possessed higher, Escherichia coli expression yield, a 2-3°C increase in apparent melting temperature and improved aggregation resistance upon heating at high concentration. Select mutations were combined and shown to confer additive improvements to these biophysical characteristics. Finally, the wild-type and most stable triple variant Fab variant were converted into a human IgG1 and expressed in mammalian cells. Both expression level and aggregation resistance were similarly improved in the engineered IgG1. Analysis of the wild-type Fab crystal structure provided a structural rationale for the selected residues changes. This approach can help guide future Fab stabilization efforts.

Impact of cysteine variants on the structure, activity, and stability of recombinant human α‐galactosidaseA

Recombinant human α-galactosidase A (rhαGal) is a homodimeric glycoprotein deficient in Fabry disease, a lysosomal storage disorder. In this study, each cysteine residue in rhαGal was replaced with serine to understand the role each cysteine plays in the enzyme structure, function, and stability. Conditioned media from transfected HEK293 cells were assayed for rhαGal expression and enzymatic activity. Activity was only detected in the wild type control and in mutants substituting the free cysteine residues (C90S, C174S, and the C90S/C174S). Cysteine-to-serine substitutions at the other sites lead to the loss of expression and/or activity, consistent with their involvement in the disulfide bonds found in the crystal structure. Purification and further characterization confirmed that the C90S, C174S, and the C90S/C174S mutants are enzymatically active, structurally intact and thermodynamically stable as measured by circular dichroism and thermal denaturation. The purified inactive C142S mutant appeared to have lost part of its alpha-helix secondary structure and had a lower apparent melting temperature. Saturation mutagenesis study on Cys90 and Cys174 resulted in partial loss of activity for Cys174 mutants but multiple mutants at Cys90 with up to 87% higher enzymatic activity (C90T) compared to wild type, suggesting that the two free cysteines play differential roles and that the activity of the enzyme can be modulated by side chain interactions of the free Cys residues. These results enhanced our understanding of rhαGal structure and function, particularly the critical roles that cysteines play in structure, stability, and enzymatic activity.

Discovery and characterization of thermophilic limonene-1,2-epoxide hydrolases from hot spring metagenomic libraries.

The epoxide hydrolases (EHs) represent an attractive option for the synthesis of chiral epoxides and 1,2-diols which are valuable building blocks for the synthesis of several pharmaceutical compounds. A metagenomic approach has been used to identify two new members of the atypical EH limonene-1,2-epoxide hydrolase (LEH) family of enzymes. These two LEHs (Tomsk-LEH and CH55-LEH) show EH activities towards different epoxide substrates, differing in most cases from those previously identified for Rhodococcus erythropolis (Re-LEH) in terms of stereoselectivity. Tomsk-LEH and CH55-LEH, both from thermophilic sources, have higher optimal temperatures and apparent melting temperatures than Re-LEH. The new LEH enzymes have been crystallized and their structures solved to high resolution in the native form and in complex with the inhibitor valpromide for Tomsk-LEH and poly(ethylene glycol) for CH55-LEH. The structural analysis has provided insights into the LEH mechanism, substrate specificity and stereoselectivity of these new LEH enzymes, which has been supported by mutagenesis studies.

Thermal stabilization of dihydrofolate reductase using monte carlo unfolding simulations and its functional consequences.

Design of proteins with desired thermal properties is important for scientific and biotechnological applications. Here we developed a theoretical approach to predict the effect of mutations on protein stability from non-equilibrium unfolding simulations. We establish a relative measure based on apparent simulated melting temperatures that is independent of simulation length and, under certain assumptions, proportional to equilibrium stability, and we justify this theoretical development with extensive simulations and experimental data. Using our new method based on all-atom Monte-Carlo unfolding simulations, we carried out a saturating mutagenesis of Dihydrofolate Reductase (DHFR), a key target of antibiotics and chemotherapeutic drugs. The method predicted more than 500 stabilizing mutations, several of which were selected for detailed computational and experimental analysis. We find a highly significant correlation of r = 0.65–0.68 between predicted and experimentally determined melting temperatures and unfolding denaturant concentrations for WT DHFR and 42 mutants. The correlation between energy of the native state and experimental denaturation temperature was much weaker, indicating the important role of entropy in protein stability. The most stabilizing point mutation was D27F, which is located in the active site of the protein, rendering it inactive. However for the rest of mutations outside of the active site we observed a weak yet statistically significant positive correlation between thermal stability and catalytic activity indicating the lack of a stability-activity tradeoff for DHFR. By combining stabilizing mutations predicted by our method, we created a highly stable catalytically active E. coli DHFR mutant with measured denaturation temperature 7.2°C higher than WT. Prediction results for DHFR and several other proteins indicate that computational approaches based on unfolding simulations are useful as a general technique to discover stabilizing mutations.