Antimicrobial Peptide Cecropin P1 Research Articles

Heterologous expression and activity of α-helical antimicrobial peptide SW in Bacillus subtilis

The antimicrobial peptide Cecropin P1 (CP1) was isolated from the pig-intestinal parasitic nematode Ascaris lumbricoides and had potent antimicrobial activity. However, its cytotoxicity is high. Herein, Using CP1 as the parent peptide, we designed a derivative peptide SW by replacing amino acids based on the structure and function relationship of antimicrobial peptides (AMPs) to reduce the toxicity of CP1. Subsequently, the gene sequence encoding SacB-6 ×His-SUMO-SW was constructed into the recombinant expression vector PHY-P43 of Bacillus subtilis WB800N. The fusion proteins with concentrations of 26.97 mg/L were obtained after purification by a Ni–NTA column. A total of 5.37 mg of SW was obtained from 1 L fermentation cultures. Recombinant SW (rSW) exhibits potent antimicrobial activity against gram-negative bacteria by inducing membrane instabilities. In addition, rSW showed low hemolytic activity and cytotoxicity against human red blood cells and IPEC-J2, respectively. In the mice model of peritonitis infection, rSW could reduce Escherichia coli-loading in the liver, spleen, lung, and kidney of mice. These results indicate that rSW production by Bacillus. subtilis is a safe and reliable strategy, and rSW has the potential to be a novel antimicrobial agent against gram-negative bacterial infections.

Three-Dimensional Structure of the Antimicrobial Peptide Cecropin P1 in Dodecylphosphocholine Micelles and the Role of the C-Terminal Residues.

Cecropin P1 (CP1) isolated from a large roundworm Ascaris suum, which is found in pig intestines, has been extensively studied as a model antimicrobial peptide (AMP). However, despite being a model AMP, its antibacterial mechanism is not well understood, particularly the function of its C-terminus. By using an Escherichia coli overexpression system with calmodulin as a fusion partner, we succeeded in the mass expression of recombinant peptides, avoiding toxicity to the host and degradation of CP1. The structure of the recombinant 15N- and 13C-labeled CP1 and its C-terminus truncated analogue in dodecylphosphocholine (DPC) micelles was determined by NMR. In this membrane-mimetic environment, CP1 formed an α-helix for almost its entire length, except for a short region at the C-terminus, and there was no evidence of a hinge, which is considered important for the expression of activity in other cecropins. Several NMR analyses showed that the entire length of CP1 was protected from water by micelles. Since the loss of the C-terminus of the analogue had little effect on the NMR structure or its interaction with the micelle, we investigated another role of the C-terminus of CP1 in its antimicrobial activity. The results showed that the C-terminal region affected the DNA-binding capacity of CP1, and this mechanism of action was also newly suggested that it contributed to the antimicrobial activity of CP1.

The Brassica napus L. plants expressing antimicrobial peptide cecropin P1 are safe for colonization by beneficial associative microorganisms

ABSTRACT This work was aimed to study the opportunity of transgenic oilseed rape (Brassica napus L.), expressing the gene of antimicrobial peptide cecropin P1 (cecP1) to be inhabited with associative microorganisms Methylobacterium mesophilicum and Pseudomonas aureofaciens. Previously, resistance was demonstrated to the microbial pathogens:Erwinia carotovora B15, Pseudomonas syringae, Fusarium oxysporum, and Botrytis cinerea. Analysis of the fatty acid composition of transgenic plant seeds showed an increase in the proportion of unsaturated fatty acids. Plants studied showed increased photosynthetic activity in oxidative stress induced by paraquat instead of in oxidative stress and UV radiation compared to control ones. A study of the interaction of transgenic plants with the associative microorganisms showed that bacteria were located in all initially colonized plants, as well as in plants obtained after several passages of microproliferation. Accordingly, transgenic plants, containing the cecP1 gene were actively colonized by associative bacteria, indicating their safety for associative bacteria, indicating their safety for beneficial microorganisms.

Expression of antimicrobial peptide Cecropin P1 in Saccharomyces cerevisiae and its antibacterial and antiviral activity in vitro

Cecropin P1, acting as an antimicrobial, has a broad-spectrum antibacterial activity with some antiviral and antifungal properties. It is a promising natural alternative to antibiotics which is originally isolated from the pig intestinal parasitic nematode Ascaris suum. Many studies have shown that Cecropin P1 is helpful for the prevention or treatment of clinical diseases. Therefore, it is very necessary to establish a safe, nontoxic, and efficient expression method of Cecropin P1. The results indicated that the recombinant protein was about 5.5 kDa showed by Tricine–SDS–PAGE and Western blot. And Cecropin P1 was efficiently secreted and expressed after 12 h of induction, with an increasing yield over the course of the induction. Its maximum concentration was 7.83 mg/L after concentration and purification. In addition, in vitro experiments demonstrated that Cecropin P1 not only exerted a strong inhibitory effect on Escherichia coli, Salmonella sp., Shigella sp., and Pasteurella sp., but also displayed an antiviral activity against PRRSV NADC30-Like strain. Collectively, the strategy of expressing Cecropin P1 in Saccharomyces cerevisiae is harmless, efficient, and safe for cells. In addition, the expressed Cecropin P1 has antiviral and antibacterial properties concurrently. How to cite: Jiang R, Zhang P, Wu X, et al., Expression of antimicrobial peptide Cecropin P1 in Saccharomyces cerevisiae and its antibacterial and antiviral activity in vitro. Electron J Biotechnol 2021;50. https://doi.org/10.1016/j.ejbt.2020.12.006

Detergent-assisted Enhancement of the Translation Rate during Cell-free Synthesis of Peptides in an Escherichia coli Extract

The open nature of cell-free synthesis allows customization of the reaction conditions for given target molecules using diverse biological and non-biological substances. This study demonstrates that non-ionic detergents can be used to enhance translation during the synthesis of peptides in a cell-free system derived from an Escherichia coli extract. The yield of the antimicrobial peptide Cecropin P1 was markedly increased in the presence of detergents. The stimulatory effect of detergents was not limited to the Cecropin P1 peptide, but the detergent also enhanced the translation of other antimicrobial peptides. Furthermore, the enhanced translation rate by detergents was maintained for extended periods by a continuous exchange cell-free synthesis reaction, leading to production of antimicrobial peptides with markedly improved yields.

Nucleation and growth of pores in 1,2-Dimyristoyl-sn-glycero-3-phosphocholine (DMPC) / cholesterol bilayer by antimicrobial peptides melittin, its mutants and cecropin P1.

Antimicrobial peptides are one of the most promising alternatives to antibiotics for targeting pathogens without developing resistance. In this study, pore formation in 1,2-Dimyristoyl-snglycero-3-phosphocholine (DMPC) / cholesterol liposome induced by native melittin, its two mutant variants (G1I and I17 K), and cecropin P1 was investigated by monitoring the dynamics of fluorescence dye leakage. A critical peptide concentration was required for dye leakage with the rate of leakage being dependent on peptide concentration above a critical value. A lag time was required for dye leakage for low peptide concentrations that are above the critical value, which decreased at higher peptide concentrations eventually approaching zero. Lag time was found to be in the order I17 K mutant with lower hydrophobicity and higher net charge > G1I with higher hydrophobicity > melittin > cecropin P1. Cecropin P1 exhibited the highest rate of dye leakage followed by melittin, G1I, and I17 K. Size distribution and transmission electron microscopy (TEM) of liposomes exposed to peptides of different concentrations indicated pore formation with accompanied stretching of liposomes at low peptide concentrations for both melittin and cecropin P1. At much higher concentrations, however, size distribution indicated three peaks for both peptides. In both cases, TEM images show that the middle and small peaks are shown to be due to stretched liposome and broken stretched liposome respectively. For melittin, the large peak is due to peptide aggregates as well as aggregates of liposome. For cecropin P1, however, the large peak indicates cecropin P1 aggregates with solubilized lipids thus suggesting carpet mechanism.

Synergistic effect of low power ultrasonication on antimicrobial activity of cecropin P1 against E. coli in food systems

Recent studies have shown that both low frequency (20–100 kHz) ultrasonication and antimicrobial peptides (AMPs) treatment processes have a significant advantage in inactivating bacterial cells than the conventional heat treatment due to higher food texture quality of the final product. However, the effect of the combined process has not been fully investigated in complex matrices such as food. In this study, deactivation of Escherichia coli in different concentrations of milk and orange juice were performed using three different treatments: low frequency ultrasonication (20 kHz) at different power levels, antimicrobial peptide Cecropin P1 at different concentrations, and combination of both. The results of all samples showed that the combined treatment is more efficient, reducing the cell density of E. coli up to four orders of magnitude, compared to individual treatments. However, the milk concentration results in lower synergistic effect. This is believed to be due to complexation of milk proteins with Cecropin P1 thus resulting in less availability of the latter for antimicrobial action. This dependence was not observed in orange juice samples. Ultrasonication resulted in insignificant decrease in viscosity, color and vitamin C for both milk and orange juice except at higher power level of 160 W at longer exposure time.

Interactions between Surface-Immobilized Antimicrobial Peptides and Model Bacterial Cell Membranes.

Sum frequency generation (SFG) vibrational spectroscopy was used to study surface immobilization effects on the interactions between antimicrobial peptide cecropin P1 (CP1) and model cell membranes. While free CP1 in solution interacted with a model cell membrane composed of a phosphatidylglycerol (PG) bilayer, electrostatic interaction led to the attachment of CP1 molecules onto the PG surface and the hydrophobic domain in the lipid bilayer enabled the peptides to insert into the bilayer and form α-helices from random coil structures. While CP1 molecules immobilized on a self-assembled monolayer interacted with PG lipid vesicles, the intensity of the SFG peak for the peptide α-helix decreased as the PG vesicle concentration increased. It was believed that when surface-immobilized CP1 molecules interacted with lipid vesicles, they lay down on the surface or became random coils. When the immobilized CP1 interacted with a PG lipid monolayer on water, the strong interaction led to the lying-down orientation of all of the surface-immobilized peptides as well. Differently, no significant interactions between surface-immobilized CP1 with the mammalian cell membrane model 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine bilayer were observed. Our results suggest that, instead of membrane insertion, the electrostatic interactions between the surface cationic charges of CP1 and anionic bacterial membranes may play an important role in the antimicrobial activity of the surface-immobilized CP1 peptide.

Implementation of antimicrobial peptides for sample preparation prior to nucleic acid amplification in point-of-care settings

ABSTRACTBackground: A variety of sample preparation techniques are used prior to nucleic acid amplification. However, their efficiency is not always sufficient and nucleic acid purification remains the preferred method for template preparation. Purification is difficult and costly to apply in point-of-care (POC) settings and there is a strong need for more robust, rapid, and efficient biological sample preparation techniques in molecular diagnostics.Methods: Here, the authors applied antimicrobial peptides (AMPs) for urine sample preparation prior to isothermal loop-mediated amplification (LAMP). AMPs bind to many microorganisms such as bacteria, fungi, protozoa and viruses causing disruption of their membrane integrity and facilitate nucleic acid release.Results: The authors show that incubation of E. coli with antimicrobial peptide cecropin P1 for 5 min had a significant effect on the availability of template DNA compared with untreated or even heat treated samples resulting in up to six times increase of the amplification efficiency.Conclusion: These results show that AMPs treatment is a very efficient sample preparation technique that is suitable for application prior to nucleic acid amplification directly within biological samples. Furthermore, the entire process of AMPs treatment was performed at room temperature for 5 min thereby making it a good candidate for use in POC applications.

Effect of immobilization on the antimicrobial activity of a cysteine-terminated antimicrobial Peptide Cecropin P1 tethered to silica nanoparticle against E. coli O157:H7 EDL933

Antimicrobial peptides (AMPs) have the ability to penetrate the cell membrane, form pores which eventually lead to cell death. Immobilization of AMP on nanoparticles can play a major role in antimicrobial materials, biosensors for pathogen detection and in food safety. The minimum inhibitory concentration (MIC) of free Cecropin P1 (CP1, sequence SWLSTAKKLENSAKKRLSEGIAIAIQGGPR) and adsorbed on silica nanoparticle against E. coli O157:H7 EDL933 were 0.78μg/ml. This was found to be consistent with preservation of α-helical secondary structure of CP1 upon adsorption as indicated by circular dichroism (CD). Cysteine-terminus modified Cecropin P1 (CP1C, sequence SWLSTAKKLENSAKKRLSEGIAIAIQGGPRC) was chemically immobilized onto silica nanoparticles with maleimide-PEG-NHS ester cross-linkers of different PEG chain lengths. The antimicrobial activity of CP1C in solution and adsorbed on silica nanoparticles against E. coli O157:H7 EDL933 were found to be the same as those for CP1. However, tethered CP1C exhibited much higher MIC of 24.38, 37.55 and 109.82μg/ml for (PEG)20, (PEG)6 and (PEG)2 linkers respectively. The antimicrobial activity of CP1C tethered to silica nanoparticles with (PEG)20 linker was found to be lower for lower surface coverage with MIC values being 86.06, 36.89, 24.38 and 17.84μg/ml for surface coverage of 12.3%, 24.4%, 52.8% and 83.8% respectively. All atom MD simulation of 1:3 DOPG/DOPC mixed membrane interacting with free and PEGlyated CP1C indicated that presence of PEG linker prevented CP1C from interacting with the bilayer which may explain the loss of antimicrobial activity of tethered CP1C.

Immunomodulating and Revascularizing Activity of Kalanchoe pinnata Synergize with Fungicide Activity of Biogenic Peptide Cecropin P1.

Previously transgenic Kalanchoe pinnata plants producing an antimicrobial peptide cecropin P1 (CecP1) have been reported. Now we report biological testing K. pinnata extracts containing CecP1 as a candidate drug for treatment of wounds infected with Candida albicans. The drug constitutes the whole juice from K. pinnata leaves (not ethanol extract) sterilized with nanofiltration. A microbicide activity of CecP1 against an animal fungal pathogen in vivo was demonstrated for the first time. However, a favorable therapeutic effect of the transgenic K. pinnata extract was attributed to a synergism between the fungicide activity of CecP1 and wound healing (antiscar), revascularizing, and immunomodulating effect of natural biologically active components of K. pinnata. A commercial fungicide preparation clotrimazole eliminated C. albicans cells within infected wounds in rats with efficiency comparable to CecP1-enriched K. pinnata extract. But in contrast to K. pinnata extract, clotrimazole did not exhibit neither wound healing activity nor remodeling of the scar matrix. Taken together, our results allow assumption that CecP1-enriched K. pinnata extracts should be considered as a candidate drug for treatment of dermatomycoses, wounds infected with fungi, and bedsores.

35S Promoter Methylation in Kanamycin-Resistant Kalanchoe (Kalanchoe pinnata L.) Plants Expressing the Antimicrobial Peptide Cecropin P1 Transgene.

Transgenic kalanchoe plants (Kalanchoe pinnata L.) expressing the antimicrobial peptide cecropin P1 gene (cecP1) under the control of the 35S cauliflower mosaic virus 35S RNA promoter and the selective neomycin phosphotransferase II (nptII) gene under the control of the nopaline synthase gene promoter were studied. The 35S promoter methylation and the cecropin P1 biosynthesis levels were compared in plants growing on media with and without kanamycin. The low level of active 35S promoter methylation further decreases upon cultivation on kanamycin-containing medium, while cecropin P1 synthesis increases.

Lipopolysaccharide-bound structure of the antimicrobial peptide cecropin P1 determined by nuclear magnetic resonance spectroscopy.

Antimicrobial peptides (AMPs) are components of the innate immune system and may be potential alternatives to conventional antibiotics because they exhibit broad-spectrum antimicrobial activity. The AMP cecropin P1 (CP1), isolated from nematodes found in the stomachs of pigs, is known to exhibit antimicrobial activity against Gram-negative bacteria. In this study, we investigated the interaction between CP1 and lipopolysaccharide (LPS), which is the main component of the outer membrane of Gram-negative bacteria, using circular dichroism (CD) and nuclear magnetic resonance (NMR). CD results showed that CP1 formed an α-helical structure in a solution containing LPS. For NMR experiments, we expressed (15) N-labeled and (13) C-labeled CP1 in bacterial cells and successfully assigned almost all backbone and side-chain proton resonance peaks of CP1 in water for transferred nuclear Overhauser effect (Tr-NOE) experiments in LPS. We performed (15) N-edited and (13) C-edited Tr-NOE spectroscopy for CP1 bound to LPS. Tr-NOE peaks were observed at the only C-terminal region of CP1 in LPS. The results of structure calculation indicated that the C-terminal region (Lys15-Gly29) formed the well-defined α-helical structure in LPS. Finally, the docking study revealed that Lys15/Lys16 interacted with phosphate at glucosamine I via an electrostatic interaction and that Ile22/Ile26 was in close proximity with the acyl chain of lipid A.

Producing marker-free Kalanchoe plants expressing antimicrobial peptide cecropin P1 gene

Kalanchoe pinnate (Kalanchoe pinnata L. ) plants with synthetic gene of antimicrobial peptide cecropin P1 (CP1) under the control of promoter 35S RNA of cauliflower mosaic virus (CaMV 35S) were produced. For transformation, a modified binary vector not containing selective genes of tolerance against antibiotics and herbicides was used. Screening of the marker-free transformed plants was conducted on the medium without selective antibiotics by revealing antibacterial activity of plant extracts and cecropin P1. The marker-free plants produced displayed increased resistance against bacterial and fungus phytopathogens, while their extracts were characterized by antimicrobial activity for human and animal pathogens. These plants meet the requirements of biosafety and may be used as producers of cecropin P1 in pharmaceutics.

Interfacial Behaviors of Antimicrobial Peptide Cecropin P1 Immobilized on Different Self-Assembled Monolayers

Surfaces immobilized with biological molecules such as peptides and proteins are widely used in many important applications including biosensors, medical devices, and food packaging. It was found that the structures of surface-immobilized peptides control their surface properties. In this study, we investigated interfacial behaviors of antimicrobial peptide cecropin P1 (CP1) immobilized onto a maleimide-terminated self-assembled monolayer (Mal SAM) and a mixed SAM (Mal-OH SAM, a mixture of maleimide-terminated SAM and hydroxyl-terminated SAM) surface via C-terminus modified cysteine (CP1c). The surface coverage, secondary structure, orientation, and antimicrobial activity of immobilized CP1c were investigated using surface plasmon resonance (SPR), circular dichroism (CD), sum frequency generation (SFG) vibrational spectroscopy, dynamic contact antimicrobial assay, and coarse grained molecular dynamics (MD) simulations. It was found that the surface coverages of CP1c on the Mal SAM and the mixed Mal-OH SAM...

Novel expression system for enhanced synthesis of antimicrobial peptide cecropin P1 in plants

A gene of antimicrobial peptide cecropin P1 (CP1) was inserted into the vector plasmid pPCV91 under the control of promoter 35S RNA of cauliflower mosaic virus (CaMV 35S) containing four enhancer sequences CaMV 35S and nontranslated leader sequence Ω RNA of tobacco mosaic virus. The recombinant vector obtained was used for agrobacterial transformation of tobacco plants (Nicotiana tabacum L., variety Samsun) with the polymerase chain reaction (PCR)-based method. The presence of gene CP1 in the genome of plants was proven by western-blot analysis and testing the antibiotic activity of plant extracts. In different plant lines, the level of cecropin P1 synthesis amounted 0.02–0.2% of total soluble plant leaf protein. The transgenic plants, unlike the control ones, displayed enhanced tolerance to phytopathogenic microorganisms and oxidative stress. It was established that the ability of the transgenic plants to express cecropin P1 is transmitted to progeny.

Cecropin P1 inhibits porcine reproductive and respiratory syndrome virus by blocking attachment.

BackgroundPorcine reproductive and respiratory syndrome virus (PRRSV) is a continuous threat to the pig industry, causing high economic losses worldwide. Current vaccines have specific limitations in terms of their safety and efficacy, so the development of novel antiviral drugs is urgently required. The aim of this study was to evaluate the inhibitory effects and underlying molecular mechanisms of the antimicrobial peptide cecropin P1 (CP1) against PRRSV infection in vitro.ResultsCP1 not only displayed extracellular virucidal activity against PRRSV, but also exerted a potent inhibitory effect when added either before, simultaneously with, or after viral inoculation. The inhibitory effect of CP1 occurred during viral attachment, but not at viral entry into Marc-145 cells. CP1 also inhibited viral particle release and attenuated virus-induced apoptosis during the late phase of infection. CP1 exerted similar inhibitory effects against PRRSV infection in porcine alveolar macrophages, the cells targeted by the virus in vivo during its infection of pigs. The expression of interleukin 6 was elevated by CP1 in porcine alveolar macrophages, which might contribute to its inhibition of PRRSV infection.ConclusionsCollectively, our findings provide a new direction for the development of potential therapeutic drugs against PRRSV infection.

Environmental effect on surface immobilized biological molecules.

Our recent sum frequency generation (SFG) vibrational spectroscopic experiment ( J. Phys. Chem. B 2014 , 118 , 2904 - 2912 ) showed that immobilized antimicrobial peptide cecropin P1 (cCP1) on a self-assembled monolayer (SAM) surface via N-terminus exhibited significantly different conformational and/or orientational behaviors when exposed to pure water vs a 50% (v/v) 2,2,2-trifluoroethanol (TFE)/water mixture. Meanwhile, our recent molecular dynamics (MD) simulations ( J. Phys. Chem. B 2014 , 118 , 5670 - 5680 ) further revealed that the immobilized cCP1 via N-terminus in pure water largely adopts an overall bent structure lying down on the SAM surface, consistent with the SFG observation. Here, MD simulations were performed on the immobilized cCP1 on a SAM surface via N-terminus while in contact with a 50% (v/v) TFE/water mixture to further investigate the effects of environment (water vs TFE/water mixture) on the interfacial structure and orientation of immobilized peptide. The simulation results demonstrated that the immobilized cCP1 on the SAM surface via the N-terminus with two different starting states with different orientations and conformations, when exposed to a 50% (v/v) TFE/water mixture, was eventually able to maintain a linear α-helical structure, standing upright on the SAM surface. Taken with the corresponding SFG observation, our simulation results indicate that the conformational behavior of the immobilized peptide is mediated by the local hydrophobic environments resulting from the TFE aggregation around the peptide. Such knowledge can be used to regulate the surface conformation and functionality of immobilized peptides via changing surrounding chemical environments (e.g., TFE cosolvent), which is important for the microbial detection and killing based on surface-immobilized antimicrobial peptides.

Molecular structures of C- and N-terminus cysteine modified cecropin P1 chemically immobilized onto maleimide-terminated self-assembled monolayers investigated by molecular dynamics simulation.

Biosensors using peptides or proteins chemically immobilized on surfaces have many advantages such as better sensitivity, improved stability, and longer shelf life compared to those prepared using physically adsorbed biomolecules. Chemical immobilization can better control the interfacial conformation and orientation of peptides and proteins, leading to better activity of these biomolecules. In this research, molecular dynamics (MD) simulations were employed to systematically investigate the structure and dynamics of surface-tethered antimicrobial peptide cecropin P1 (CP1) modified with a cysteine residue at the C- (CP1c) or N-terminus (cCP1). Such CP1c and cCP1 molecules were chemically immobilized onto a silane-EG4-maleimide self-assembled monolayer (SAM) surface by forming a thio-ether bond between the cysteine group in CP1c or cCP1 and the surface maleimide group. The simulation results showed that the immobilized cCP1 (via the N-terminus) tends to bend and gradually lie down onto the SAM surface, due to the large structural fluctuation of the C-terminus induced by unfavorable interactions between the hydrophobic C-terminal residues and water. Differently, the tethered CP1c (via the C-terminus) more or less stands up on the surface, only tilting slightly even after 60 ns. The simulation results can be well correlated to the recent experimental results obtained from sum frequency generation (SFG) vibrational spectroscopic study. The current simulation data provide more atomic level details on how the hydrophobicity difference in the C-terminus and N-terminus of the amphiphilic peptide can lead to different structures of the same peptide tethered to the surface via different termini. This knowledge can be used to rationally design chemically immobilized peptides to achieve desired structure and functionality.

Different Interfacial Behaviors of Peptides Chemically Immobilized on Surfaces with Different Linker Lengths and via Different Termini

Molecular structures such as conformation and orientation are crucial in determining the activity of peptides immobilized to solid supports. In this study, sum frequency generation (SFG) vibrational spectroscopy was applied to investigate such structures of peptides immobilized on self-assembled monolayers (SAMs). Here cysteine-modified antimicrobial peptide cecropin P1 (CP1) was chemically immobilized onto SAM with a maleimide terminal group. Two important characteristics, length of the poly(ethylene glycol) (PEG) segment in the SAM and location of the cysteine residue in the peptide, were examined using SFG spectroscopy to determine the effect of each on surface immobilization as well as peptide secondary structure and its orientation in the immobilized state. Results have shown that while each length of PEG chain studied promotes chemical immobilization of the target peptide and prevents nonspecific adsorption, CP1 immobilized on long-chain (PEG2k) maleimide SAMs shows random coil structure in water, whereas CP1 demonstrates α-helical structure when immobilized on short-chain (with four ethylene glycol units - (EG4)) maleimide SAMs. Placement of the cysteine residue at the C-terminus promotes the formation of α-helical structure of CP1 with a single orientation when tethered to EG4 maleimide SAM surfaces. In contrast, immobilization via the N-terminal cysteine of CP1 results in a random coil or lying-down helical structure. The bacteria capturing/killing capability was tested, showing that the surface-immobilized CP1 molecules via C- and N- terminal cysteine exhibit only slight difference, even though they have different secondary structures and orientations.