Antibacterial Composites Research Articles

A Review on Recently Developed Antibacterial Composites of Inorganic Nanoparticles and Non-Hydrogel Polymers for Biomedical Applications.

Development of new antibacterial materials for solving biomedical problems is an extremely important and very urgent task. This review aims to summarize recent articles (from the last five and mostly the last three years) on the nanoparticle/polymer composites for biomedical applications. Articles on polymeric nanoparticles (NPs) and hydrogel-based systems were not reviewed, since we focused our attention mostly on the composites of polymeric matrix with at least one inorganic filler in the form of NPs. The fields of application of newly developed antibacterial NPs/polymer composites are described, along with their composition and synthetic approaches that allow researchers to succeed in preparing effective composite materials for medical and healthcare purposes.

High-frequency ultrasound modulation of Zn2+ release from nanoclay supported ZnO antibacterial composites

Bacterial infections pose considerable health risks, emphasising the critical need for effective and biocompatible antibacterial drugs. Considerably, we developed an efficient antimicrobial system incorporating the combined potential of high-frequency ultrasound and antimicrobial drugs against bacterial infections. A ZnO–kaolinite (Kaol) composite with antibacterial properties was synthesised by growing ZnO on the Kaol nano-clay surface using the co-precipitation method. High-frequency ultrasound efficiently promotes the release of Zn2+, which enhances the antibacterial properties. Furthermore, in-depth in vitro antibacterial studies and bacterial live/dead staining experiments validate the exceptionally high antibacterial performance of the composite. Therefore, owing to the synergistic effects of high-frequency ultrasound and antibacterial properties, the as-prepared novel antibacterial composite is a promising potential substitute for conventional antibacterial agents.

Esthetic dentistry in prosthodontics including restorative materials-Review

All of us want and desire to look attractive. Esthetic dentistry in Prosthodontics is the branch that focuses on natural look of the teeth- to be beautiful. Esthetic is a Greek word 'estheticos' which is insightful. It is related to pleasure or good-looking. In 1950, this word was invented and esthetic revolution started in 1970s. This article deals with recent techniques and restorative materials used in Prosthodontics as in Rpd, Fpd, Maxillofacial, Implant, Smile like composites, ceramics, ormocers, cention N, zirconomers and in near future antibacterial composites. Ultimately it is the dentist's choice to mimic tooth structure and make it lifelike as much as possible.

Preparation of effective antibacterial composites of low-density polyethylene modified with quaternary ammonium functionalized zinc oxide nanoparticles

Preparation of effective antibacterial composites of low-density polyethylene modified with quaternary ammonium functionalized zinc oxide nanoparticles

Preparation and properties of silver-carrying nano-titanium dioxide antimicrobial agents and silicone composite

The characteristics of dopamine self-polymerization were used to cover the nano-titanium dioxide (TiO2) surface and produce nano-titanium dioxide-polydopamine (TiO2-PDA). The reducing nature of dopamine was then used to reduce silver nitrate to silver elemental particles on the modified nano-titanium dioxide: The resulting TiO2-PDA-Ag nanoparticles were used as antimicrobial agents. Finally, the antibacterial agent was mixed with silicone to obtain an antibacterial silicone composite material. The composition and structure of antibacterial agents were analyzed by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron energy spectroscopy, and X-ray diffraction. Microscopy and the antibacterial properties of the silicone antibacterial composites were studied as well. The TiO2-PDA-Ag antimicrobial agent had good dispersion versus nano-TiO2. The three were strongly combined with obvious characteristic peaks. The antibacterial agents were evenly dispersed in silicone, and the silicone composite has excellent antibacterial properties. Bacillus subtilis (B. subtilis) adhesion was reduced from 246 × 104 cfu/cm2 to 2 × 104 cfu/cm2, and colibacillus (E. coli) reduced from 228 × 104 cfu/cm2 leading to bacteria-free adhesion.

Immobilizing DNase in ternary AuAgCu hydrogels to accelerate biofilm disruption for synergistically enhanced therapy of MRSA infections

Bacterial biofilm-related infections have become a significant global concern in public health and economy. Extracellular DNA (eDNA) is regarded as one of the key elements of extracellular polymeric substances (EPS) in bacterial biofilm, providing robust support to maintain the stability of bacterial biofilms for fighting against environmental stresses (such as antibiotics, reactive oxygen species (ROS), and hyperthermia). In this study, ternary AuAgCu hydrogels nanozyme with porous network structures were utilized for the immobilization of DNase (AuAgCu@DNase hydrogels) to realize enhanced biofilm decomposition and antibacterial therapy of MRSA. The prepared AuAgCu@DNase hydrogels can efficiently hydrolyze eDNA in biofilms so that the generated ROS and hyperthermia by laser irradiation can permeate into the interior of the biofilm to achieve deep sterilization. The typical interface interactions between AuAgCu hydrogels and DNase and the excellent photothermal-boost peroxidase-like performances of AuAgCu hydrogels take responsibility for the enhanced antibacterial activity. In the MRSA-infected wounds model, the in vivo antibacterial results revealed that the AuAgCu@DNase hydrogels possess excellent drug-resistant bacteria-killing performance with superb biocompatibility. Meanwhile, the pathological analysis of collagen deposition and fibroblast proliferation of wounds demonstrate highly satisfactory wound healing. This work offers an innovative path for developing nanozyme-enzyme antibacterial composites against drug-resistant bacteria and their biofilms.

Preparation of iron nanoparticles mediated by Punica granatum and its application for the treatment of denture stomatitis

Denture stomatitis affects around 50% of denture wearers in certain populations as a prevalent oral mucosal lesion. There has been a high interest in utilizing natural antibacterial composites, such as medicinal plants extracts. Punica granatum, a popular medicinal plant, has various pharmacological applications. In this particular research, iron NPs were formulated by the Punica granatum aqueous extract, following the principles of green chemistry. The study objective was to assess the effectiveness of FeNPs on denture stomatitis. The usual analytical examinations were applied for FeNPs. The FE-SEM results confirmed that the nanoparticles exhibited a spherical morphology, with sizes ranging from 21.6 to 65.8 nm. This clinical trial involved 30 patients who received FeNPs. Over a period of two weeks, the patients were instructed to consume the mouthwash four times per day, with 15–20 drops each time, for a duration of 2–3 minutes. Following the mouthwash, they were advised to refrain from eating or drinking for 0.5 hour. The patients in both classes were instructed to consume the medication at particular times. The erythema and inflammation levels were recorded and assessed at each session using a 6-point scale and a graded blade. Additionally, palatal mucosa mycological samples were collected for culture during each visit. The data revealed a notable reduction in the palatal erythema surface compared to the initial condition in the follow-up visits. This study suggests that FeNPs can effectively reduce the Candida colonies number and the area affected by erythema in the denture stomatitis management.

The effect of dental material type and masticatory forces on periodontitis-derived subgingival microbiomes

Restorative dental materials can frequently extend below the gingival margin, serving as a potential haven for microbial colonization, and altering the local oral microbiome to ignite infection. However, the contribution of dental materials on driving changes of the composition of the subgingival microbiome is under-investigated. This study evaluated the microbiome-modulating properties of three biomaterials, namely resin dental composites (COM), antimicrobial piezoelectric composites (BTO), and hydroxyapatite (HA), using an optimized in vitro subgingival microbiome model derived from patients with periodontal disease. Dental materials were subjected to static or cyclic loading (mastication forces) during biofilm growth. Microbiome composition was assessed by 16S rRNA gene sequencing. Dysbiosis was measured in terms of subgingival microbial dysbiosis index (SMDI). Biomaterials subjected to cyclic masticatory loads were associated with enhanced biofilm viability except on the antibacterial composite. Biomaterials held static were associated with increased biofilm biomass, especially on HA surfaces. Overall, the microbiome richness (Chao index) was similar for all the biomaterials and loading conditions. However, the microbiome diversity (Shannon index) for the HA beams was significantly different than both composites. In addition, beta diversity analysis revealed significant differences between composites and HA biomaterials, and between both loading conditions (static and cyclic). Under static conditions, microbiomes formed over HA surfaces resulted in increased dysbiosis compared to composites through the enrichment of periopathogens, including Porphyromonas gingivalis, Porphyromonas endodontalis, and Fretibacterium spp., and depletion of commensals such as Granulicatella and Streptococcus spp. Interestingly, cyclic loading reversed the dysbiosis of microbiomes formed over HA (depletion of periopathogenes) but increased the dysbiosis of microbiomes formed over composites (enrichment of Porphyromonas gingivalis and Fusobacterim nucleatum). Comparison of species formed on both composites (control and antibacterial) showed some differences. Commercial composites enriched Selenomonas spp. and depleted Campylobacter concisus. Piezoelectric composites effectively controlled the microbiome viability without significantly impacting the species abundance. Findings of this work open new understandings of the effects of different biomaterials on the modulation of oral biofilms and the relationship with oral subgingival infections.

Degradable rGO-MoS2-Fe2O3 based carboxymethyl cellulose packaging films for fruit preservation

ABSTRACT Developing innovative packaging films is of great significance for extending the shelf-life of perishable fruit. In this study, we successfully synthesized antibacterial composites by incorporating Fe into reduced graphene oxides (rGO) and MoS2. The resulting rGO-MoS2-Fe2O3 composites demonstrated effective inhibition against E. coli and S. aureus. After investigating the antibacterial mechanism of rGO-MoS2-Fe2O3 composites, we utilized carboxymethyl cellulose (CMC) as a film substrate to create CMC films infused with rGO-MoS2-Fe2O3 composites. The incorporation of rGO-MoS2-Fe2O3 composites decreased the light transmittance and hygroscopicity of CMC films, while greatly enhancing the mechanical properties of CMC films. To evaluate the practical applications of these rGO-MoS2-Fe2O3-based CMC films, we conducted a strawberry preservation experiment, which revealed that CMC films supplemented with 5 wt% rGO-MoS2-Fe2O3 exhibited exceptional performance in preventing weight loss and maintaining total titratable acidity levels in strawberries. These findings highlighted the promising potential of rGO-MoS2-Fe2O3-based CMC films for fruit preservation applications.

Construction of porous chitosan-based organic/inorganic composite with synergistic antibacterial activity

The increasing resistance of antibiotics and the global spread of pathogenic bacteria highlight the urgent need for novel antibacterial materials. In this study, a terpolymer (PVBA) with carboxyl (-COOH) and benzyl chloride (-C7H6Cl) groups was synthesized using acrylic acid (AA), butyl acrylate (BA), and 4-vinyl benzyl chloride (VBC) as monomers. The -C7H6Cl groups in the PVBA terpolymer was then reacted with N-N-dimethylhexadecane 1-amine (HAM) to prepare a more hydrophilic antibacterial (PVBA-N) terpolymer. Further, a synthetic/natural (PVBA-N/C) composite with quaternary ammonium (QA) groups was prepared by covalent crosslinking of the PVBA-N terpolymer and chitosan (CS). Finally, the AgCl-decorated PVBA-N/C (AgCl@PVBA-N/C) antibacterial composite was were constructed by anchoring silver chloride nanoparticles (AgClNPs) to the surface of the PVBA-N/C composite. Remarkably, the resulting AgCl@PVBA-N/C antibacterial composite had a porous network structure and exhibited favorable antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) based on both contact-typed and release-typed antibacterial modes, and low cytotoxicity against L929 cells. This research provides an effective strategy to combat the threat of bacterial resistance to human health relying on the advantage of the respective antibacterial mechanisms of various antibacterial ingredients.

Effect of nanometer zinc oxide and processing technology on the properties of antibacterial composites

Effect of nanometer zinc oxide and processing technology on the properties of antibacterial composites

Antibacterial composites based on halloysite with silver nanoparticles and polyoxometalates

The spread of bacterial infections aggravated by the development of microbial resistance to antibiotics requires the creation of protective antibacterial materials. Nanomaterials with biocides can provide antibacterial and antibiofilm properties against Gram-positive and Gram-negative bacteria. In this work, we synthesized nanocomposites with silver nanoparticles and different polyoxometalates of Keggin-structure (phosphomolybdic, phosphotungstic, and tungstosilicic acids) on eco-friendly nanoclay called halloysite. We found that the nanocomposite containing silver nanoparticles and phosphomolybdic acid deposited on the halloysite possesses the best antibacterial performance of all the obtained composites, having a minimal inhibitory concentration of 0.5 g/L against S. aureus, 0.25 g/L against P. aeruginosa and A. baumannii. This composite reduces the viability of formed biofilms at a concentration of 2.5 g/L.

Compatibility study of Plantago extract and its modified product/PBS antibacterial composites

Compatibility study of Plantago extract and its modified product/PBS antibacterial composites

Synthesis and Characteristics of a Fish Scale-Based Biochar–Nanosilver Antibacterial Material

Microbial contamination has caused various diseases via pathogenic bacteria, endangering people’s lives every day. Recently, increasing attention has been paid to the exploration of new and effective antibacterial materials. In this paper, we attempted to synthesize a fish scale charcoal nanosilver antibacterial composite using waste fish scale as a carbon substrate. X-ray diffraction, Fourier-transform infrared spectroscopy, thermogravimetry-differential scanning calorimetry, and scanning electron microscopy showed that the structure of the nanosilver fish scale material formed and the nanosilver particles formed account for 72.1% of the silver element. Its antibacterial ability against Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa was examined using the plate counting method and inhibition zones; the maximum inhibition zone was 32 mm. The antibacterial rate could reach >99.9%, indicating that this prepared material had excellent antibacterial activity. After 20 batches of bacteriostasis, the bacteriostasis rate was more than 90%, indicating that the fish scale/silver composite had sustained antibacterial ability and excellent antibacterial reusability. Finally, potential antibacterial mechanism was proposed. Overall, the fish scale/silver composite has a good application prospect and a wide range of applications in the handling of microbial pollution in the future.

The synthesis of oxalate-modified pyrite/chitosan as an antibacterial composite

The combination of organic and inorganic components has produced bioactive materials with excellent properties. Chitosan is a widely used organic component that has received recognition as a biocompatible material. In contrast, naturally occurring pyrite has so far received limited exposure as a biomaterial, despite its great antibacterial activity. Hence, the incorporation of pyrite into the chitosan matrix is expected to highlight the usage of pyrite as a bioactive material, particularly in antibacterial response. In this research, chitosan and oxalate-modified pyrite were combined to form beads at wt% pyrite loadings of 1, 3 and 5%. Energy-dispersive X-ray spectroscopy analysis could confirm the loading of pyrite into the bead matrix. The beads exhibit a high water absorption ability. With the addition of pyrite, the absorption of water could increase up to 37% compared with that of blank chitosan beads. The immersion of beads in simulated body fluid shows the bioactivity of beads by formation of apatite. Microbial activity against Escherichia coli and Staphylococcus aureus is exhibited by all composite beads containing oxalate-modified pyrite, particularly by beads containing 5 wt% oxalate–pyrite.

Ionic Liquid-Assisted Antibacterial Membranes: Successful Preparation and Enhanced Antibacterial Effect

In this study, we synthesized a supramolecular antibacterial ionic salt, [PHMB][Sal], based on poly(hexamethylene biguanide) hydrochloride (PHMB) and sodium salicylate (SS) to endow plastic membranes with antibacterial function. The antibacterial composites of polyelectrolyte-nonsteroidal ionic salt can be blended with polymer materials, such as polybutylene adipate terephthalate (PBAT), because the melting point of the salt can be coordinated with that of the polymer material. The properties of the prepared membranes containing polyelectrolyte-nonsteroidal ionic salts did not change significantly. The mechanical properties and antimicrobial activities of the prepared hydrophobic membranes were investigated. When 3% of [PHMB][Sal] was added, the antimicrobial activities against Gram-positive Staphylococcus aureus and Escherichia coli were 4.12 and 4.30, respectively, and the antibacterial rate was as high as 99.9%, exhibiting extremely excellent antimicrobial properties. Biodegradable [PHMB][Sal] membrane materials are expected to be used in medical environments as well as on packaging surfaces in logistics, which can effectively prevent bacterial cross-infection.

“Bioactive Dental Composites And Bonding Agents”

Existing dental restorative materials are largely inert and used to restore lost tooth components. In this article, we will look back at the progress that has been made on a new class of bioactive materials that can not only restore the loss of tooth structure but also serve as therapeutic agents. Replacement of lost minerals, inhibition of recurrent caries, neutralization of acids, repulsion of proteins, suppression of biofilms and acid production, demonstration of low cytotoxicity similar to current resins, protection of dental pulp, and promotion of tertiary dentin formation are all possible with remineralizing and antibacterial composites and bonding agents. The ability to ion release and prevent caries is a promising use for this emerging class of bioactive materials.

Bactericidal effects of copper-polypyrrole composites modified with silver nanoparticles against Gram-positive and Gram-negative bacteria

The aim of this research is to study the bactericidal effects of copper?polypyrrole (PPy) composites deposited onto 316L stainless steel (SS) modified with silver nanoparticles (Np). The antimicrobial properties were evaluated against twenty-four strains of Gram-positive and Gram-negative bacteria. Among the twenty-four strains studied, isolates included reference strains (Escherichia coli ATCC 25922, Escherichia coli 0157:H7 EDL 933, Staphylococcus aureus ATCC 25923 and Listeria monocytogenes ATCC 7644), as well as strains isolated from food and clinical samples. The antimicrobial activity of the composites demonstrated that all PPy-modified films had antibacterial properties. Notably, Cu-PPyAgNp500 exhibited the strongest inhibitory activity against both Gram-negative and Gram-positive bacteria. Surface modification of 316L SS with these films is a promising and viable alternative for the development of novel antibacterial composites that can inhibit the growth of a significant number of bacteria.

Fabrication of silver ions aramid fibers and polyethylene composites with excellent antibacterial and mechanical properties

Abstract Nowadays, with the continuous understanding of the pathogenic mechanism of bacterium, the demand for antibacterial plastic products had significantly increased. Besides that, many counties issued mandatory standards for plastic products, which imposed strict requirements on ash content to prevent the addition of excessive inorganic matter to plastics in order to avoid weakening the properties of plastics and deteriorating the recyclable property. Based on this, the development of composites with organic fiber-loaded antibacterial agents is of practicable value and urgency. We used an open-ring addition reaction to modified aramid fiber (AF) by utilizing epoxypropyltrimethoxysilane to react with the reactive groups on the surface of AFs. Subsequently, the modified fibers were surface loaded with silver ionic glass beads. After that, a series of high-density polyethylene composites with excellent mechanical properties and antibacterial properties were prepared using melt mixing method. It was shown that the composite had a low ash value (1.88 wt%) even at a higher filling concentration (7 wt%) and the fibers could change the crystalline properties and morphology of the composite. Because of the fiber reinforcement and crystallization induction effects, the tensile strength and elasticity module of the composites could be improved by 141% and 136%, respectively. In addition, the composites had excellent long-lasting contact antibacterial effects against the inhibition of E. coli. The proposed organic fiber loading technique and antibacterial composites will provide a method for designing and preparing eco-friendly and high-performance plastic products.

A long-acting hygroscopic and antibacterial composite filler: A new approach to phytoextraction solid residues from Citrus aurantium L.

A promising new composite filler with hygroscopic and antibacterial properties was developed based on the Fructus Aurantii Immaturus solid residues (FAIR) from Citrus aurantium L. , a typical bulk forest industrial crops. FAIR@AM-APTAC composite filler was established using FAIR as substrate, allyl glycidyl ether (AGE) as the cross-linker, while functional monomers of acrylamide (AM) and (3-acrylamidopropyl) trimethyl ammonium chloride (APTAC) were introduced. The structure of FAIR@AM-APTAC was characterized by FTIR , SEM, BET and TG–DSC analysis. The results confirmed that the FAIR@AM-APTAC composite filler was successfully prepared, which exhibited a three-dimensional(3D) network structure with a specific surface area of 0.1758 m²/g and exhibited excellent thermal stability. The equilibrium percent moisture absorption of FAIR@AM-APTAC (63.0%) was higher than that of FAIR (15.7%) under RH= 80% at 25 ℃ for 48 h, and much better moisture adsorption was achieved. The moisture adsorption process of FAIR@AM-APTAC followed a type III moisture adsorption isotherm and conformed to GAB, Peleg and pseudo-second order kinetics model. The moisture adsorption process of FAIR@AM-APTAC was a multi-layer adsorption process with enthalpy driven non-spontaneous and endothermic, which was dominated by chemical adsorption simultaneous existing physical adsorption, and the adsorption force was the synergy of both hydrogen bond and van der Waals force. The inhibition ratio of FAIR@AM-APTAC was 97.1% for E. coli and 95.4% for S. aureus . The antimicrobial efficacy of FAIR@AM-APTAC was enormously improved compared with that of FAIR due to the introduction of quaternary ammonium groups. The antibacterial mechanism of FAIR@AM-APTAC may be that the surface contact between bacterial and FAIR@AM-APTAC leads to inactivation. Significantly, FAIR@AM-APTAC showed long-acting hygroscopic and antibacterial properties, with little weakness even after 120 times cycle of wetting-drying. It is expected to be applied to an indoor air purifier or filter. • A new approach to phytoextraction solid residues from Citrus aurantium L. • Establishment of 3D structure long-acting hygroscopic and antibacterial composite. • Superior hygroscopic properties. Percent moisture absorption: 63.0% (25 ℃，RH=80%). • Superb antibacterial properties. Inhibition ratio: 97.1% ( E. coli ) and 95.4% ( S. aureus ). • A promising new filler: expected to be applied to indoor air purifier or filter.