Anthropomorphic Model Research Articles

Ride dynamic behaviour of coupled human-vehicle vibratory model

In this paper a 17-degree of freedom (dof) human-seat system is developed using anthropomorphic modelling and the model is coupled with a 7-degree of freedom of a typical small passenger car to study the dynamic response of human driver due to vehicle vibrations. The coupled model is analysed by MATLAB simulation for ride dynamic behaviour of human driver under harmonic input excitation in the frequency range of 0–40 Hz. The ride behaviour in terms of vertical accelerations of different body segments of the human driver is compared for ride comfort using ISO-2631 standard. Further parametric analysis is carried out to improve the ride comfort of the human driver.

Neolithic Priorities: Ritual and Visual Preferences within Burials and Corporeality in the Balkans

Neolithic bodies are not only manifestations of subjective principles. Social and symbolic norms are also incorporated within the bodies of both actual and represented individuals. These norms often relate to economic and religious notions of society, as well as to effigies. Owing to high population densities in Neolithic villages, only a select group of the inhabitants were buried within settlements or represented in images. This generated a category of privileged individuals and body features, which were related to symbolic principles rather than social hierarchy. Such practices among Neolithic societies in the Balkans are evident within burials and human representations. Individuals buried inside settlements, anthropomorphic house models, and figurines from several sites in Ovče Pole, Pelagonia, and the Skopje Valley are used as case studies in this paper. Placing these sites into a wider geographical context, it is argued that gender, age and body parts were significant criteria in funerary practices and features of corporeality.

Realistic MC simulated myocardium protocol, incorporating motion in the XCAT anthropomorphic model. Preliminary quantification study

Realistic MC simulated myocardium protocol, incorporating motion in the XCAT anthropomorphic model. Preliminary quantification study

Investigation of realistic PET simulations incorporating tumor patient's specificity using anthropomorphic models : creation of an oncology database

Investigation of realistic PET simulations incorporating tumor patient's specificity using anthropomorphic models : creation of an oncology database

Investigation of realistic PET simulations incorporating tumor patientˈs specificity using anthropomorphic models: Creation of an oncology database

The GATE Monte Carlo simulation toolkit is used for the implementation of realistic PET simulations incorporating tumor heterogeneous activity distributions. The reconstructed patient images include noise from the acquisition process, imaging system's performance restrictions and have limited spatial resolution. For those reasons, the measured intensity cannot be simply introduced in GATE simulations, to reproduce clinical data. Investigation of the heterogeneity distribution within tumors applying partial volume correction (PVC) algorithms was assessed. The purpose of the present study was to create a simulated oncology database based on clinical data with realistic intratumor uptake heterogeneity properties. PET/CT data of seven oncology patients were used in order to create a realistic tumor database investigating the heterogeneity activity distribution of the simulated tumors. The anthropomorphic models (NURBS based cardiac torso and Zubal phantoms) were adapted to the CT data of each patient, and the activity distribution was extracted from the respective PET data. The patient-specific models were simulated with the Monte Carlo Geant4 application for tomography emission (GATE) in three different levels for each case: (a) using homogeneous activity within the tumor, (b) using heterogeneous activity distribution in every voxel within the tumor as it was extracted from the PET image, and (c) using heterogeneous activity distribution corresponding to the clinical image following PVC. The three different types of simulated data in each case were reconstructed with two iterations and filtered with a 3D Gaussian postfilter, in order to simulate the intratumor heterogeneous uptake. Heterogeneity in all generated images was quantified using textural feature derived parameters in 3D according to the ground truth of the simulation, and compared to clinical measurements. Finally, profiles were plotted in central slices of the tumors, across lines with heterogeneous activity distribution for visual assessment. The accuracy of the simulated database was assessed against the original clinical images. The PVC simulated images matched the clinical ones best. Local, regional, and global features extracted from the PVC simulated images were closest to the clinical measurements, with the exception of the size zone variability and the mean intensity values, where heterogeneous tumors showed better reproducibility. The profiles on PVC simulated tumors after postfiltering seemed to represent the more realistic heterogeneous regions with respect to the clinical reference. In this study, the authors investigated the input activity map heterogeneity in the GATE simulations of tumors with heterogeneous activity distribution. The most realistic heterogeneous tumors were obtained by inserting PVC activity distributions from the clinical image into the activity map of the simulation. Partial volume effect (PVE) can play a crucial role in the quantification of heterogeneity within tumors and have an important impact on applications such as patient follow-up during treatment and assessment of tumor response to therapy. The development of such a database incorporating patient anatomical and functional variability can be used to evaluate new image processing or analysis algorithms, while providing control of the ground truth, which is not available when dealing with clinical datasets. The database includes all images used and generated in this study, as well as the sinograms and the attenuation phantoms for further investigation. It is freely available to the interested reader of the journal at http://www.med.upatras.gr/oncobase/.

Pediatric radiation dosimetry for positron‐emitting radionuclides using anthropomorphic phantoms

Positron emission tomography (PET) plays an important role in the diagnosis, staging, treatment, and surveillance of clinically localized diseases. Combined PET/CT imaging exhibits significantly higher sensitivity, specificity, and accuracy than conventional imaging when it comes to detecting malignant tumors in children. However, the radiation dose from positron-emitting radionuclide to the pediatric population is a matter of concern since children are at a particularly high risk when exposed to ionizing radiation. The authors evaluate the absorbed fractions and specific absorbed fractions (SAFs) of monoenergy photons/electrons as well as S-values of 9 positron-emitting radionuclides (C-11, N-13, O-15, F-18, Cu-64, Ga-68, Rb-82, Y-86, and I-124) in 48 source regions for 10 anthropomorphic pediatric hybrid models, including the reference newborn, 1-, 5-, 10-, and 15-yr-old male and female models, using the Monte Carlo N-Particle eXtended general purpose Monte Carlo transport code. The self-absorbed SAFs and S-values for most organs were inversely related to the age and body weight, whereas the cross-dose terms presented less correlation with body weight. For most source/target organ pairs, Rb-82 and Y-86 produce the highest self-absorbed and cross-absorbed S-values, respectively, while Cu-64 produces the lowest S-values because of the low-energy and high-frequency of electron emissions. Most of the total self-absorbed S-values are contributed from nonpenetrating particles (electrons and positrons), which have a linear relationship with body weight. The dependence of self-absorbed S-values of the two annihilation photons varies to the reciprocal of 0.76 power of the mass, whereas the self-absorbed S-values of positrons vary according to the reciprocal mass. The produced S-values for common positron-emitting radionuclides can be exploited for the assessment of radiation dose delivered to the pediatric population from various PET radiotracers used in clinical and research settings. The mass scaling method for positron-emitters can be used to derive patient-specific S-values from data of reference phantoms.

The Response of Pediatric Ribs to Quasi-static Loading: Mechanical Properties and Microstructure

Traumatic injury is a major cause of death in the child population. Motor vehicle crashes account for a large portion of these deaths, and a considerable effort is put forth by the safety community to identify injury mechanisms and methods of injury prevention. However, construction of biofidelic anthropomorphic test devices and computational models for this purpose requires knowledge of bone properties that is difficult to obtain. The objective of this study is to characterize the relationship between mechanical properties and measures of skeletal development in the growing rib. Anterolateral segments of 44 ribs from 12 pediatric individuals (age range: 5 months to 9 years) were experimentally tested in three-point bending. Univariate mixed models were used to assess the predictive abilities of development-related variables (e.g., age, stature, histomorphometry, cross-sectional geometry) on mechanical variables (material and structural properties). Results show that stature, in addition to age, may be a reliable predictor of bone strength, and that histomorphometry has potential to explain bone properties and to further our understanding of fracture mechanisms. For example, percent secondary lamellar bone (%Sd.Ar) successfully predicts peak force (F P) and Young's modulus (E). Application of these findings is not restricted to injury biomechanics, but can also be referenced in forensic and anthropological contexts.

Design of Anthropomorphic Flow Phantoms Based on Rapid Prototyping of Compliant Vessel Geometries

Anatomically realistic flow phantoms are essential experimental tools for vascular ultrasound. Here we describe how these flow phantoms can be efficiently developed via a rapid prototyping (RP) framework that involves direct fabrication of compliant vessel geometries. In this framework, anthropomorphic vessel models were drafted in computer-aided design software, and they were fabricated using stereolithography (one type of RP). To produce elastic vessels, a compliant photopolymer was used for stereolithography. We fabricated a series of compliant, diseased carotid bifurcation models with eccentric stenosis (50%) and plaque ulceration (types I and III), and they were used to form thin-walled flow phantoms by coupling the vessels to an agar-based tissue-mimicking material. These phantoms were found to yield Doppler spectrograms with significant spectral broadening and color flow images with mosaic patterns, as typical of disturbed flow under stenosed and ulcerated disease conditions. Also, their wall distension behavior was found to be similar to that observed in vivo, and this corresponded with the vessel wall’s average elastic modulus (391 kPa), which was within the nominal range for human arteries. The vessel material’s acoustic properties were found to be sub-optimal: the estimated average acoustic speed was 1801 m/s, and the attenuation coefficient was 1.58 dB/(mm·MHzn) with a power-law coefficient of 0.97. Such an acoustic mismatch nevertheless did not notably affect our Doppler spectrograms and color flow image results. These findings suggest that phantoms produced from our design framework have the potential to serve as ultrasound-compatible test beds that can simulate complex flow dynamics similar to those observed in real vasculature.

Monte Carlo study of the effects of system geometry and antiscatter grids on cone-beam CT scatter distributions.

The proliferation of cone-beam CT (CBCT) has created interest in performance optimization, with x-ray scatter identified among the main limitations to image quality. CBCT often contends with elevated scatter, but the wide variety of imaging geometry in different CBCT configurations suggests that not all configurations are affected to the same extent. Graphics processing unit (GPU) accelerated Monte Carlo (MC) simulations are employed over a range of imaging geometries to elucidate the factors governing scatter characteristics, efficacy of antiscatter grids, guide system design, and augment development of scatter correction. A MC x-ray simulator implemented on GPU was accelerated by inclusion of variance reduction techniques (interaction splitting, forced scattering, and forced detection) and extended to include x-ray spectra and analytical models of antiscatter grids and flat-panel detectors. The simulator was applied to small animal (SA), musculoskeletal (MSK) extremity, otolaryngology (Head), breast, interventional C-arm, and on-board (kilovoltage) linear accelerator (Linac) imaging, with an axis-to-detector distance (ADD) of 5, 12, 22, 32, 60, and 50 cm, respectively. Each configuration was modeled with and without an antiscatter grid and with (i) an elliptical cylinder varying 70-280 mm in major axis; and (ii) digital murine and anthropomorphic models. The effects of scatter were evaluated in terms of the angular distribution of scatter incident upon the detector, scatter-to-primary ratio (SPR), artifact magnitude, contrast, contrast-to-noise ratio (CNR), and visual assessment. Variance reduction yielded improvements in MC simulation efficiency ranging from ∼17-fold (for SA CBCT) to ∼35-fold (for Head and C-arm), with the most significant acceleration due to interaction splitting (∼6 to ∼10-fold increase in efficiency). The benefit of a more extended geometry was evident by virtue of a larger air gap-e.g., for a 16 cm diameter object, the SPR reduced from 1.5 for ADD = 12 cm (MSK geometry) to 1.1 for ADD = 22 cm (Head) and to 0.5 for ADD = 60 cm (C-arm). Grid efficiency was higher for configurations with shorter air gap due to a broader angular distribution of scattered photons-e.g., scatter rejection factor ∼0.8 for MSK geometry versus ∼0.65 for C-arm. Grids reduced cupping for all configurations but had limited improvement on scatter-induced streaks and resulted in a loss of CNR for the SA, Breast, and C-arm. Relative contribution of forward-directed scatter increased with a grid (e.g., Rayleigh scatter fraction increasing from ∼0.15 without a grid to ∼0.25 with a grid for the MSK configuration), resulting in scatter distributions with greater spatial variation (the form of which depended on grid orientation). A fast MC simulator combining GPU acceleration with variance reduction provided a systematic examination of a range of CBCT configurations in relation to scatter, highlighting the magnitude and spatial uniformity of individual scatter components, illustrating tradeoffs in CNR and artifacts and identifying the system geometries for which grids are more beneficial (e.g., MSK) from those in which an extended geometry is the better defense (e.g., C-arm head imaging). Compact geometries with an antiscatter grid challenge assumptions of slowly varying scatter distributions due to increased contribution of Rayleigh scatter.

Generation of voxelized breast phantoms from surgical mastectomy specimens.

In the research and development of dedicated tomographic breast imaging systems, digital breast object models, also known as digital phantoms, are useful tools. While various digital breast phantoms do exist, the purpose of this study was to develop a realistic high-resolution model suitable for simulating three-dimensional (3D) breast imaging modalities. The primary goal was to design a model capable of producing simulations with realistic breast tissue structure. The methodology for generating an ensemble of digital breast phantoms was based on imaging surgical mastectomy specimens using a benchtop, cone-beam computed tomography system. This approach allowed low-noise, high-resolution projection views of the mastectomy specimens at each angular position. Reconstructions of these projection sets were processed using correction techniques and diffusion filtering prior to segmentation into breast tissue types in order to generate phantoms. Eight compressed digital phantoms and 20 uncompressed phantoms from which an additional 96 pseudocompressed digital phantoms with voxel dimensions of 0.2 mm(3) were generated. Two distinct tissue classification models were used in forming breast phantoms. The binary model classified each tissue voxel as either adipose or fibroglandular. A multivalue scaled model classified each tissue voxel as percentage of adipose tissue (range 1%-99%). Power spectral analysis was performed to compare simulated reconstructions using the breast phantoms to the original breast specimen reconstruction, and fits were observed to be similar. The digital breast phantoms developed herein provide a high-resolution anthropomorphic model of the 3D uncompressed and compressed breast that are suitable for use in evaluating and optimizing tomographic breast imaging modalities. The authors believe that other research groups might find the phantoms useful, and therefore they offer to make them available for wider use.

Evaluation of absorbed and effective doses to patients from radiopharmaceuticals using the ICRP 110 reference computational phantoms and ICRP 103 formulation

In diagnostic nuclear medicine, mean absorbed doses to patients' organs and effective doses are published for standard stylised anatomic models. To provide more realistic and detailed geometries of the human morphology, the International Commission on Radiological Protection (ICRP) has recently adopted male and female voxel phantoms to represent the reference adult. This work investigates the impact of the use of these new computational phantoms. The absorbed doses were calculated for 11 different radiopharmaceuticals currently used in diagnostic nuclear medicine. They were calculated for the ICRP 110 reference computational phantoms using the OEDIPE software and the MCNP extended Monte Carlo code. The biokinetic models were issued from ICRP Publications 53, 80 and 106. The results were then compared with published values given in these ICRP Publications. To discriminate the effect of anatomical differences on organ doses from the effect of the calculation method, the Monte Carlo calculations were repeated for the reference adult stylised phantom. The voxel effect, the influence of the use of different densities and nuclear decay data were also investigated. Effective doses were determined for the ICRP 110 adult reference computational phantom with the tissue weighting factor of ICRP Publication 60 and the tissue weighting factors of ICRP Publication 103. The calculation method and, in particular, the simulation of the electron transport have a significant influence on the calculated doses, especially, for small and walled organs. Overestimates of >200 % were observed for the urinary bladder wall of the stylised phantom compared with the computational phantoms. The unrealistic organ topology of the stylised phantom leads to important dose differences, sometimes by an order of magnitude. The effective doses calculated using the new computational phantoms and the new tissue weighting factors are globally lower than the published ones, except for some radiopharmaceuticals, where the differences can reach 60 % higher than the published values. This study analyses the first set of absorbed and effective doses with the new ICRP male and female reference computational phantoms for different radiopharmaceuticals. It highlights the importance of taking into account the electron transport and the realism of the shape and inter-organ distances of the anthropomorphic model used.

Evaluation of Resonance Properties of the Human Body Models Situated in the RF Field

The radio-frequency (RF) electromagnetic field absorption in the human body model is investigated in this article. Absorption of prolate model of the biological body exhibits resonance properties in the case of so called E polarization. This occurs in the arrangement when the longitudinal axis of the body is parallel with an electrical component of the electromagnetic field. Absorption properties of a homogeneous human model have been explored in the frequency range from 20 MHz to 500 MHz in the CST Microwave Studio programme environment. The simulation results of RF field absorption in the model of the human body are presented for ellipsoidal, cylindrical and anthropomorphic Laura model shapes, and for various heights and widths of the model body. The values of the resonance frequency and also whole-body absorption values at these frequencies are evaluated.

Development and validation of a parametric child anthropomorphic test device model representing 6–12-year-old children

Children from 6 to 12 year-old (YO) restrained in motor vehicles by seatbelts designed for adults often experience poor belt fit that results in adverse outcomes in crashes. Computer modelling provides a means to investigate the effects of body size on the injury risks in crashes beyond the few sizes of anthropomorphic test devices (ATDs) that are available. In this study, a parametric ATD model capable of representing 6–12 YO children was developed using MADYMO. A more realistic representation of pelvis and abdomen geometry, modified joint stiffness and improved contact characteristics were added to a MADYMO model of the Hybrid-III 6 YO ATD. The new parametric ATD model was validated against results from 12 sled tests using real second-row vehicle seats with Hybrid III 6 YO and 10 YO ATDs under different restraint configurations using a multi-objective optimisation method. The model validity was evaluated by statistical assessments of output measurements between the tests and simulations. Results showed that the model-predicted ATD head, chest and pelvis accelerations, as well as the seatbelt forces were in good agreement with those from the tests. This validated parametric child ATD model provides a useful tool to investigate the body size effects and to develop restraint system design guidelines for 6–12 YO child occupants.

A model for predicting primary blast lung injury

This article presents a model-based method for predicting primary blast injury. On the basis of the normalized work injury mechanism from previous work, this method presents a new model that accounts for the effects of blast orientation and species difference. The analysis used test data from a series of extensive experimental studies sponsored by the US Army Medical Research and Materiel Command. In these studies, more than 1200 sheep were exposed to air blast in free-field and confined enclosures, and lung injuries were quantified as the percentage of surface area contused. Blast overpressure data were collected using blast test devices placed at matching locations to represent loadings to the thorax. Adopting the modified Lobdell model with further modifications specifically for blast and scaling, the thorax deformation histories for the left, chest, and right sides of the thorax were calculated for all sheep subjects. Using the calculated thorax velocities, effective normalized work was computed for each test subject representing the irreversible work performed on the lung tissues normalized by lung volume and ambient pressure. Dose-response curves for four categories of injuries (trace, slight, moderate, and severe) were developed by performing log-logistic correlations of the computed normalized work with the injury outcomes, including the effect of multiple shots. A blast lethality correlation was also established. Validated by sheep data, the present work revalidates the previous understanding and findings of the blast lung injury mechanism and provides an anthropomorphic model for primary blast injury prediction that can be used for occupational and survivability analysis. Economic and decision analysis, level III.

Organ dose calculation in CT based on scout image data and automatic image registration

Computed tomography (CT) has become the main contributor of the cumulative radiation exposure in radiology. Information on cumulative exposure history of the patient should be available for efficient management of radiation exposures and for radiological justification. To develop and evaluate automatic image registration for organ dose calculation in CT. Planning radiograph (scout) image data describing CT scan ranges from 15 thoracic CT examinations (9 men and 6 women) and 10 abdominal CT examinations (6 men and 4 women) were co-registered with the reference trunk CT scout image. 2-D affine transformation and normalized correlation metric was used for image registration. Longitudinal (z-axis) scan range coordinates on the reference scout image were converted into slice locations on the CT-Expo anthropomorphic male and female models, following organ and effective dose calculations. The average deviation of z-location of studied patient images from the corresponding location in the reference scout image was 6.2 mm. The ranges of organ and effective doses with constant exposure parameters were from 0 to 28.0 mGy and from 7.3 to 14.5 mSv, respectively. The mean deviation of the doses for fully irradiated organs (inside the scan range), partially irradiated organs and non-irradiated organs (outside the scan range) was 1%, 5%, and 22%, respectively, due to image registration. The automated image processing method to registrate individual chest and abdominal CT scout radiograph with the reference scout radiograph is feasible. It can be used to determine the individual scan range coordinates in z-direction to calculate the organ dose values. The presented method could be utilized in automatic organ dose calculation in CT for radiation exposure tracking of the patients.

Persistent homology for automatic determination of human-data based cost of bipedal walking

Robotic walking research, since its inception, has attempted to generate anthropomorphic gait, but the community as a whole has struggled to agree even upon the correct ordering of discrete events during walking. In this paper, we propose a universal temporal ordering of discrete events for bipedal walking based on motion capture data collected from a nine subject straight line walking experiment. To construct this ordering, we develop a technique based on persistent homology to process the motion capture data to determine when the number of contact points changes during the course of a step which automatically dictates the ordering of discrete events. Surprisingly the findings of this work are that every subject regardless of age, sex, weight or height in the experiment had an identical temporal ordering of such events. This result allows for the development of a universal anthropomorphic bipedal robotic walking model because the temporal ordering of events together with the Lagrangian modeling of the robot completely determines the mathematical model of the system. Importantly, this universal ordering allows us to propose a cost function based on human data: the human-based cost, which we use to gauge the “human-like” quality of robotic walking.

Transtemporal Ultrasound Application Potentially Elevates Brain Temperature: Results of an Anthropomorphic Skull Model

Transtemporal sonothrombolysis is a tool for a more effective treatment in acute stroke patients. However, some reports revealed side effects, which might be potentially connected to temperature elevation. To gain better insight into cerebral temperature changes during transtemporal sonication, diagnostic and therapeutic ultrasound (US) applications were evaluated using an anthropomorphic skull model. The impact of diagnostic (PW-Doppler, 1.8-MHz, 0.11 W/cm², TIC 1.2) and therapeutic (1-MHz and 3-MHz, 0.07 - 0.71 W/cm², continuous and pulsed mode) US application on temperature changes was evaluated at the level of muscle/temporal bone (TB), TB/brain, brain and at the middle cerebral artery (MCA) using 4 miniature thermocouples along the US beam. Sonication lasted 120 minutes. Diagnostic ultrasound revealed a maximum temperature increase of 1.45°/0.60°/0.39°/0.41°C (muscle/TB, TB/brain, brain, MCA) after 120 minutes. Therapeutic-1-MHz ultrasound raised temperature by 4.33°/2.02°/1.05 °C/0.81°C (pulsed 1:20) and by 10.38°/4.95°/2.43°/2.08°C (pulsed 1:5) over 120 minutes. Therapeutic-3-MHz US raised temperature by 4.89°/2.56°/1.24/1.25°C (pulsed 1:20) and by 14.77°/6.59°/3.56°/2.86°C (pulsed 1:5) over 120 minutes, respectively. Continuous application of therapeutic US (1-MHz and 3-MHz) led to a temperature increase of 13.86°/3.63°/1.66°/1.48°C and 17.09°/4.28°/1.38/0.99°C within 3 minutes. Diagnostic PW-Doppler showed only a moderate temperature increase and can be considered as safe. Therapeutic sonication is very powerful in delivering energy so that even pulsed application modes resulted in significant and potentially harmful temperature increases.

Thermal Effects of Diagnostic Ultrasound in an Anthropomorphic Skull Model

Exposure to diagnostic ultrasound (US) can significantly heat biological tissue although conventional routine examinations are regarded as safe. The risk of unwanted thermal effects increases with a high absorption coefficient and extended insonation time. Certain applications of transcranial diagnostic US (TC-US) require prolonged exposure. An anthropomorphic skull model (ASM) was developed to evaluate thermal effects induced by TC-US of different modalities. The objective was to determine whether prolonged continuous TC-US application results in potentially harmful temperature increases.The ASM consists of a human skull with tissue mimicking material and exhibits acoustic and anatomical characteristics of the human skull and brain. Experiments are performed with a diagnostic US device testing four different US modalities: Duplex PW (pulsed wave) Doppler, PW Doppler, color flow Doppler and B-mode. Temperature changes are recorded during 180 minutes of insonation.All measurements revealed significant temperature increases during insonation independent of the US modality. The maximum temperature elevation of + 5.25° C (p < 0.001) was observed on the surface of the skull exposed to duplex PW Doppler. At the bone-brain border a maximum temperature increae of + 2.01 °C (p < 0.001) was noted. Temperature increases within the brain were < 1.23 °C (p = 0.001). The highest values were registered using the duplex PW Doppler modality.TC-US induces significant local heating effects in an ASM. An application duration that extends routine clinical periods causes potentially harmful heating especially in tissue close to bone. TC-US elevates the temperature in the brain mimicking tissue but is not capable of producing harmful temperature increases during routine examinations. However, the risk of thermal injury in brain tissue increases significantly after an exposure time of > 2 hours.ZIEL:: Thermische Effekte stellen ein potenzielles Risiko bei der Verwendung von prolongierter Ultraschall(US)-Anwendung dar. Ein entscheidender Faktor ist die Expositionszeit, welche die Gefahr von thermischen Schäden am Gehirn, aber auch an den dem Schallkopf näherliegenden Geweben erhöht. Anhand 1eines anthropomorphen Schädelmodells wurde die Temperaturentwicklung über eine Applikationsdauer über 180 min analysiert.Es wurden 4 unterschiedliche diagnostische US-Modalitäten getestet: Duplex-PW-Doppler, PW-Doppler, Color-Flow-Doppler und B-Mode. Gemessen wird die Temperaturveränderung während einer Expositionszeit von 180 min an unterschiedlichen Messpunkten entlang des Schallverlaufs mittels Thermosensoren.Unabhängig von der Modalität zeigten sich signifikante Temperaturanstiege in allen Messlokalisationen. Der höchste Anstieg von + 5,25 °C (< 0,001) wurde zwischen Muskel und Schädelknochen gemessen. Im Bereich zwischen Knochen und Gehirn betrug die maximale Temperaturanstieg + 2,01 °C (p < 0,001). In tiefer liegenden Hirngewebsschichten fand sich kein potenziell schädigender Temperaturanstieg (< 1,23°C; p < 0,001).Transkranieller diagnostischer US erzeugt signifikante Temperaturanstiege entlang des Schallverlaufes. Eine prolongierte Anwendungsdauer verursacht potenziell schädliche thermische Effekte in knochennahen Geweben. Auch die Temperatur in gehirnäquivalentem Gewebe wird signifikant erhöht. Es entstehen jedoch keine thermischen Schäden innerhalb einer Applikationszeit von 2 h.

Thermal Effects of Diagnostic Ultrasound in an Anthropomorphic Skull Model

Exposure to diagnostic ultrasound (US) can significantly heat biological tissue although conventional routine examinations are regarded as safe. The risk of unwanted thermal effects increases with a high absorption coefficient and extended insonation time. Certain applications of transcranial diagnostic US (TC-US) require prolonged exposure. An anthropomorphic skull model (ASM) was developed to evaluate thermal effects induced by TC-US of different modalities. The objective was to determine whether prolonged continuous TC-US application results in potentially harmful temperature increases. The ASM consists of a human skull with tissue mimicking material and exhibits acoustic and anatomical characteristics of the human skull and brain. Experiments are performed with a diagnostic US device testing four different US modalities: Duplex PW (pulsed wave) Doppler, PW Doppler, color flow Doppler and B-mode. Temperature changes are recorded during 180 minutes of insonation. All measurements revealed significant temperature increases during insonation independent of the US modality. The maximum temperature elevation of + 5.25° C (p < 0.001) was observed on the surface of the skull exposed to duplex PW Doppler. At the bone-brain border a maximum temperature increae of + 2.01 °C (p < 0.001) was noted. Temperature increases within the brain were < 1.23 °C (p = 0.001). The highest values were registered using the duplex PW Doppler modality. TC-US induces significant local heating effects in an ASM. An application duration that extends routine clinical periods causes potentially harmful heating especially in tissue close to bone. TC-US elevates the temperature in the brain mimicking tissue but is not capable of producing harmful temperature increases during routine examinations. However, the risk of thermal injury in brain tissue increases significantly after an exposure time of > 2 hours.

SU‐E‐I‐88: Realistic Pathological Simulations of the NCAT and Zubal Anthropomorphic Models, Based on Clinical PET/CT Data

In the present study a patient-specific dataset of realistic PET simulations was created, taking into account the variability of clinical oncology data. Tumor variability was tested in the simulated results. A comparison of the produced simulated data was performed to clinical PET/CT data, for the validation and the evaluation of the procedure. Clinical PET/CT data of oncology patients were used as the basis of the simulated variability inserting patient-specific characteristics in the NCAT and the Zubal anthropomorphic phantoms. GATE Monte Carlo toolkit was used for simulating a commercial PET scanner. The standard computational anthropomorphic phantoms were adapted to the CT data (organ shapes), using a fitting algorithm. The activity map was derived from PET images. Patient tumors were segmented and inserted in the phantom, using different activity distributions. The produced simulated data were reconstructed using the STIR opensource software and compared to the original clinical ones. The accuracy of the procedure was tested in four different oncology cases. Each pathological situation was illustrated simulating a) a healthy body, b) insertion of the clinical tumor with homogenous activity, and c) insertion of the clinical tumor with variable activity (voxel-by-voxel) based on the clinical PET data. The accuracy of the presented dataset was compared to the original PET/CT data. Partial Volume Correction (PVC) was also applied in the simulated data. In this study patient-specific characteristics were used in computational anthropomorphic models for simulating realistic pathological patients. Voxel-by-voxel activity distribution with PVC within the tumor gives the most accurate results. Radiotherapy applications can utilize the benefits of the accurate realistic imaging simulations, using the anatomicaland biological information of each patient. Further work will incorporate the development of analytical anthropomorphic models with motion and cardiac correction, combined with pathological patients to achieve high accuracy in tumor imaging. This research was supported by the Joint Research and Technology Program between Greece and France; 2009-2011 (protocol ID: 09FR103).