Anterior Cervical Plate Stabilization Research Articles

ACDF and posterior spinal fusion revision for posterior nonunion with deformity, myelopathy, and osteoporosis in an 87-year-old: A case report and literature review.

IntroductionCervical spondylotic myelopathy (CSM) is a spinal degenerative disorder that can ultimately lead to compression of the vertebral column with neurological sequelae. Although CSM is the most common spine pathology in the elderly American population, it remains a challenging disorder to treat among older patients.Case presentationWe report an 86 year old female patient with CSM with a history of posterior cervical fusion attempt on C3-C6 that progressed to C3-C6 nonunion with loose instrumentation. The patient had severe osteoporosis. With these indications, the patient underwent a combined anterior-posterior decompression and fusion (CAPDF) consisting of anterior cervical discectomy and fusion (ACDF) of the C3-C5, corpectomy of C6 and C7 with off FDA label use of polymethyl methacrylate augmentation (PMMA) fixation of T1 screws anteriorly for C3-T1 plate fixation and second stage instrumented posterior spinal fusion (PSF) of C3-T3. The patient had a successful fusion and reduction of her cervical spine pain with preservation of her neurological status.DiscussionWe report this case of multi-stage combined anterior and posterior fusion as a corrective measure for pseudarthrosis of a prior posterior cervical spinal fusion attempt.ConclusionIn the event of posterior spinal fusion instrumentation failure in patients with severe osteoporosis, combined multi-stage anterior-posterior fusion is a viable corrective intervention in octogenarians. This case also illustrated the utility of using PMMA for anterior cervical plate and screw stabilization in osteoporotic bone. The authors are not aware of the prior use of PMMA for screw fixation augmentation in the anterior cervical spine.

Cervical Spine Reconstruction with Chest Tube Technique After Metastasis Resection: A Single-Center Experience

The silastic tube technique, in which a chest tube is placed into the vertebral body defect and impregnated with polymethyl methacrylate, showed good results in patients with lumbar and thoracic neoplastic diseases. There has been only 1 study about the effectiveness and safety of this technique in patients with cervical metastases. We aimed to report our experience in using this technique to reconstruct the spine after corpectomy for cervical metastasis. All patients with cervical spinal metastasis who underwent surgical treatment using a chest tube impregnated with polymethyl methacrylate in conjunction with anterior cervical plate stabilization were retrospectively recruited. Demographics, tumor histology, revised Tokuhashi score, preoperative and postoperative American Spinal Injury Association score, preoperative and postoperative ambulatory status, perioperative complications, and survival time were collected. This study included 16 patients. The most common primary tumor site was the lung (6 patients; 37.5%). The mean (SD) survival time was 408 (795) days (range, 1-2797 days), and the median survival time was 72 days (95% confidence interval 28-116 days). Four patients (25%) died within 30 postoperative days. There was no surgical site infection or instrument failure after the surgery. Five patients (31.2%) lived >180 days, and 3 patients (18.8%) lived >360 days. One patient (6.2%) was still alive at the end of the study. The silastic tube technique in conjunction with anterior cervical plate stabilization might be safe, effective, and cost-effective for patients with cervical spine metastasis.

Increased Fusion Rates With Cervical Plating for Three-Level Anterior Cervical Discectomy and Fusion

A retrospective review of all patients surgically treated by a single surgeon with a three-level anterior cervical discectomy and fusion with and without anterior plate fixation. To compare the clinical and radiographic success of anterior three-level discectomy and fusion performed with and without anterior cervical plate fixation. Previous studies of multilevel cervical discectomies and fusions have shown fusion rates to decrease as the number of surgical levels increases. Anterior cervical plate stabilization can provide more stability and may increase fusion rates for multilevel fusions. Over a 7-year period, 59 patients were treated surgically with a three-level anterior cervical discectomy and fusion by the senior author. Forty patients had cervical plates, whereas 19 had fusions with no plates. These patients were observed for an average of 3.2 years. Clinical and radiographic follow-up data were obtained. Of the 59 patients, 14 had a pseudarthrosis (7 in each group). The pseudarthrosis rates were 18% (7 of 40) for patients with plating and 37% (7 of 19) for patients with no plating. Although the nonunion rate for unplated fusions was double that of plated fusions, this difference was not statistically significant. There was no statistically significant correlation between pseudarthrosis and gender, age, level of surgery, history of tobacco use, or previous anterior surgery. The fusion rates were improved with the use of a cervical plate. Inferior clinical results were demonstrated in patients with a pseudarthrosis, regardless of the use of a cervical plate. The addition of plate fixation for three-level anterior cervical discectomy and fusion is a safe procedure and does not result in higher complication rates. In this study, the pseudarthrosis rate was lower for patients with a cervical plate. However, this difference was not statistically significant. Patients treated with cervical plating had overall better results when compared with those of patients treated without cervical plates. Although the use of cervical plates decreased the pseudarthrosis rate, a three-level procedure is still associated with a high nonunion rate, and other strategies to increase fusion rates should be explored.

Indication and surgical result of anterior cervical plate stabilization for cervical diseases

Indication and surgical result of anterior cervical plate stabilization for cervical diseases

Coaxial double-lumen methylmethacrylate reconstruction in the anterior cervical and upper thoracic spine after tumor resection.

A unique method of anterior spinal reconstruction after decompressive surgery was used to prevent methylmethacrylate-dural contact in cancer patients who underwent corpectomy. The purpose of this study was to assess the efficacy and stability of polymethylmethacrylate (PMMA) anterior surgical constructs in conjunction with anterior cervical plate stabilization (ACPS) in these patients. Approximately 700 patients underwent spinal surgery at The University of Texas M. D. Anderson Cancer Center over a 4-year period. The authors conducted a retrospective outcome study for 29 of these patients who underwent anterior cervical or upper thoracic tumor resections while in the supine position. These patients were all treated using the coaxial, double-lumen, PMMA technique for anterior spinal reconstruction with subsequent ACPS. No postoperative external orthoses were used. Twenty-seven patients (93%) harbored metastatic spinal lesions and two (7%) harbored primary tumors. At 1 month postsurgery, significant improvement was seen in spinal axial pain (p<0.001), radiculopathy (p<0.001), gait (p = 0.008), and Frankel grade (p = 0.002). A total of nine patients (31%) underwent combined anterior-posterior 360 degrees stabilization. Twenty-one patients (72%) experienced no complications. Complications related to instrumentation failure occurred in only two patients (7%). There were no cases in which the patients' status worsened, and there were no neurological complications or infections. The median Kaplan-Meier survival estimate for patients with spinal metastases was 9.5 months. At the end of the study, 13 patients (45%) had died and 16 (55%) were alive. Postoperative magnetic resonance images consistently demonstrated that the dura and PMMA in all patients remained separated. The anterior, coaxial, double-lumen, PMMA reconstruction technique provides a simple means of spinal cord protection in patients in the supine position while undergoing surgery and offers excellent results in cancer patients who have undergone cervical vertebrectomy.

Anterior cervical plating for the treatment of neoplasms in the cervical vertebrae.

To assess clinical outcome and survival in patients with cervical vertebral spinal neoplasms after they have undergone anterior decompression and cervical plate stabilization (ACPS) by using either autologous bone graft or polymethylmethacrylate (PMMA) as the anterior load-bearing support structure. This was a retrospective case study composed of 30 patients harboring cervical spinal vertebral neoplasms who underwent anterior cervical decompression and (ACPS) within a 7-year period. Postoperative immobilization included treatment in a halo brace in two cases and in a hard cervical collar for the remaining patients. Postoperatively most patients underwent radio- and/or chemotherapy. All patients except one benefited from a significantly improved quality of life with decreased pain and/or improved neurological status. The mean Kaplan-Meier survivoral estimate was 35.8 months (range 8 days-11.3 years, with 10 patients alive at most recent follow-up contact). Patients achieved long-term or lifelong mechanical stability in the cervical spine, and only one patient required a repeated posterior stabilization procedure. No hardware-related complications occurred. One patient died 8 days postoperatively of pneumonia. A nonsignificant difference in survival (p = 0.2164) was observed between patients harboring metastatic neoplasms (26.8 months) and those harboring lymphomatous and multiple myeloma neoplasms (54 months). Favorable clinical outcome of both neurological symptoms and pain can be achieved using ACPS after surgery for neoplasms in the cervical vertebrae. Furthermore, long-term or lifelong cervical spine mechanical stability with bone fusion is achieved using this technique even when radiation therapy is delivered to the site of the bone graft.

Reoperation in patients after anterior cervical plate stabilization in degenerative disease.

Consecutive case retrospective chart review. First, to assess whether the number of' patients requiring a second cervical surgical intervention was changed as a result of using anterior cervical plate stabilization, and second, to determine the additional risks and/or benefits associated with the hardware implantation. The optimal technique of performing stabilization, arthrodesis, and alignment of a cervical segment after discectomy with neural decompression in degenerative disease has yet to be determined. The charts of 402 patients who had undergone an anterior cervical discectomy and arthrodesis for degenerative disease performed both with and without anterior cervical plate stabilization were reviewed, and reoperation data were compiled. The average follow-up time was 3.8 years (range, 1.5-9.4 years). Of 365 patients with 1- or 2-level cervical arthrodesis, 22 required a second surgical intervention (20 bone alone, 2 with anterior cervical plate stabilization). The Log-Rank test, which uses all patients and their total follow-up periods, was statistically significant favoring anterior cervical plate stabilization at one and two levels (P = 0.015). The addition of anterior cervical plate stabilization in one- and two-level cervical degenerative disease supplements the internal stabilization initially provided by the bone graft, and yields a lower reoperation rate.

Point of View: Reoperation in Patients After Anterior Cervical Plate Stabilization in Degenerative Disease

Point of View: Reoperation in Patients After Anterior Cervical Plate Stabilization in Degenerative Disease

Anterior Cervical Plate Stabilization in One- and Two-Level Degenerative Disease

This consecutive case retrospective chart review of 356 patients compares the reoperation rate of one- and two-level anterior cervical discectomies for degenerative disease with and without anterior cervical plate stabilization (ACPS). A total of 210 patients underwent surgery without ACPS (bone alone) and 146 patients underwent surgery with the addition of ACPS. Follow-up ranged from 1 to 9 years. A total of 22 patients with one- or two-level cervical arthrodesis required a second surgical intervention (19 bone alone, 3 with ACPS). Reoperations were performed in the bone-alone group for pseudarthrosis in 12 cases and for progression of degenerative disease in 7 cases. The reoperations in the ACPS group were performed for pseudarthrosis in one case and settling of the graft with screw fracture before fusion in two cases. The log-rank test, which uses all patients and their total follow-up periods, was statistically significant in favoring ACPS (p = 0.05). Furthermore, the reoperation rate after 1 year was also significantly lower when ACPS was utilized compared with bone alone (p = 0.0308, Fisher's exact test, two tailed). These data provide evidence that the addition of ACPS in one- and two-level cervical degenerative disease does not constitute overtreatment but rather supplements the internal stabilization initially provided by the bone graft and yields a lower reoperation rate.

P-4-469 - Anterior cervical trapezoidal plate stabilization for re-do surgery

P-4-469 - Anterior cervical trapezoidal plate stabilization for re-do surgery

O-6-83 - Risk—benefit ratio of single and multilevel anterior cervical plate stabilization for degenerative disease

O-6-83 - Risk—benefit ratio of single and multilevel anterior cervical plate stabilization for degenerative disease

Anterior Cervical Plate Used in Degenerative Disease Can Maintain Cervical Lordosis

The aim of this study was to show whether anterior cervical plate stabilization is able to maintain cervical lordosis or not when used for cervical degenerative disease. Thirty cases that underwent anterior fusion at multiple levels without cervical plating before 1986 were compared with 44 cases treated with cervical plating since 1986. Changes in the alignment of the total cervical spine and of the fused segment were studied in both groups. Collapse of the grafted bone, which was observed in 9 of 30 cases in the nonplate group, was not observed in the plate group. Alignment of the cervical spine was corrected and well maintained in the plated group, compared with the nonplate group. Anterior cervical plate stabilization could maintain the normal alignment of the cervical spine damaged by degenerative processes, whereas anterior cervical fusion without plating could not.

A biomechanical evaluation of cervical spinal stabilization methods in a bovine model. Static and cyclical loading.

A bovine model was developed for biomechanical evaluation of surgical procedures stabilizing traumatic cervical injuries disrupting the anterior and posterior spinal column. Cervical spinal segments and C4-5 functional spinal units were tested statically, and C4-5 functional spinal units were tested cyclically in evaluation of 1) the intact cervical spine, 2) Rogers' wiring method, 3) Bohlman's triple-wire technique, 4) sublaminar wiring, 5) anterior cervical plate instrumentation, and 6) posterior hook plate stabilization. Anterior cervical plate instrumentation proved inadequate, and was the least rigid, with axial and flexural loading (P less than 0.05). There was no significant difference between each of the three posterior wiring methods, and all generally restored stability to equal that of the uninjured intact cervical spine. Posterior hook plating with an interspinous bone graft serving as an extension block was the most effective method in reducing flexural stress across the injured C4-5 segment (P less than 0.05). Cyclical in vitro testing was the most sensitive method in highlighting mechanical differences between instrumentation systems, particularly with "on-line" continuous measurement of anterior and posterior strains. Anterior cervical plate stabilization does not appear to confer enough stability in cervical facet injuries to obviate the need for posterior cervical stabilization procedures. The recently developed posterior hook plate technique offers biomechanical advantages that should be weighed against the greater technical precision needed for insertion and the increased potential for neurologic and vascular complications.