Anode For Potassium-ion Batteries Research Articles

Heteroatom doped graphitic carbon nanotubes as freestanding anodes for advanced potassium-ion batteries.

Owing to its higher earth element reserve and similar chemical properties to lithium, potassium ion batteries (PIBs) have been regarded as a potential alternative to lithium-ion batteries. And considering the relatively larger ionic radius of potassium, available electrode materials need to be equipped with enough space for volume expansion during charge-discharge cycles, thus graphitic carbon nanomaterials with adjustable layer spacing gradually come into researcher's version. Here with copper nanowires serving as growth template and organic polyvinyl pyrrolidone (PVP) providing carbon source, freestanding and ultra-light graphitic carbon nanotube (GCNT) aerogels were simply assembled and annealed, which were directly used as anodes of PIBs. Annealing parameters (temperature and atmosphere) were adapted to regulate the lattice order and interlayer spacing of GCNTs, and N, O heteroatoms derived from PVP were directly doped into the carbon lattice during thermal annealing, to optimize and enhance the cycle capacity and rate performance of GCNT anodes. The electrochemical potassium storage mechanism of GCNTs was also quantitatively analyzed. Most of the potassium ions are reversibly stored by squeezing into and escaping from the carbon lattice, and simultaneously oxygen-containing functional groups with different chemical states also offer active redox sites and dedicate partial capacity. Therefore, our assembled GCNTs with large lumen are expected to sandwich-like load with active substances efficiently, further constructing next-generation PIBs with excellent performance.

A High-Rate and Ultrastable Re2Te5/MXene Anode for Potassium Storage Enabled by Amorphous/Crystalline Heterointerface Engineering.

The pursuit of anode materials capable of rapid and reversible potassium storage performance is a challenging yet fascinating target. Herein, a heterointerface engineering strategy is proposed to prepare a novel superstructure composed of amorphous/crystalline Re2Te5 anchored on MXene substrate (A/C-Re2Te5/MXene) as an advanced anode for potassium-ion batteries (KIBs). The A/C-Re2Te5/MXene anode exhibits outstanding reversible capacity (350.4 mAh g-1 after 200 cycles at 0.2 A g-1), excellent rate capability (162.5 mAh g-1 at 20 A g-1), remarkable long-term cycling capability (186.1 mAh g-1 at 5 A g-1 over 5000 cycles), and reliable operation in flexible full KIBs, outperforming state-of-the-art metal chalcogenides-based devices. Experimental and theoretical investigations attribute this high performance to the synergistic effect of the A/C-Re2Te5 with a built-in electric field and the elastic MXene, enabling improved pseudocapacitive contribution, accelerated charge transfer behavior, and high K+ ion adsorption/diffusion ability. Meanwhile, a combination of intercalation and conversion reactions mechanism is observed within A/C-Re2Te5/MXene. This work offers a new approach for developing metal tellurides- and MXene-based anodes for achieving stable cyclability and fast-charging KIBs.

Carbon coating engineering enhances the stability of graphite anode in potassium ion batteries

Graphite forms reversible potassium-graphite intercalation compounds electrochemically. Graphite anode possesses a high reversible specific capacity (279 mAh g−1) and an optimal low potential platform, rendering it an ideal anode material for potassium-ion batteries. However, the intercalation of K+ ions in graphite causes a bulk volume expansion of up to 61%, resulting in irreversible damage to the structure of graphite, which leads to inferior cycling stability. In this paper, surface-oxidized graphite (OG) with reduced particle size and increased defect densities was obtained by mechanical ball milling and chemical oxidation. Composites of soft carbon-coated OG (OG@PC) were prepared by soft carbon coating. The soft carbon coating can alleviate the bulk expansion caused by K+ intercalation/deintercalation in OG, thus slowing down the destruction of the crystalline structure of graphite after multiple charging/discharging cycles. OG@PC exhibits increased reversible specific capacity from 267 mAh g−1 to 314 mAh g−1 compared with pristine graphite at a current density of 0.05 A g−1. Moreover, at a high current density of 0.5 A g−1, a reversible specific capacity of 213 mAh g−1 was achieved after 200 cycles. This work investigates simple surface carbon coating strategies to improve the cycling stability of a graphite anode of potassium-ion batteries.

A Bandgap-Tuned Tetragonal Perovskite as Zero-Strain Anode for Potassium-Ion Batteries.

PIBs are emerging as a promising energy storage system due to high abundance of potassium resources and theoretical energy density, however, progress of PIBs is severely hindered by structural instability and poor cycling of anode material during continual insertion and extraction of larger-sized K+. Hence, developing anode material with structural stability and stable cycling remains a great challenge. Herein, bandgap-tuned Mo-doped and carbon-coated lead titanate (CMPTO) with zero-strain K+ storage is presented as ultra-stable PIBs anode. Mo doping introduces narrowed bandgap and optimized crystal lattice for enhanced intrinsic electron and ion transfer. Demonstrated by in situ XRD characterizations, the crystal structure stays stable with unchanged peak positions, fully revealing zero-strain characteristic of CMPTO anode during potassium storage for stable cyclic capability. Ultimately, CMPTO anode achieved ultra-stable cycling performance of 7000 cycles at 500 mA g-1 with high capacity retention of 90% and considerable specific capacity of 130.9 mAh g-1 after 600 cycles at 100 mA g-1; with relatively large density, CMPTO realized eminent volumetric capacity of 1111.09 mAh cm-3 and ultra-long cycling life of 10000 cycles at 7041 mA cm-3. This work introduces a promisingly new route into developing anode materials with ultra-stable performance for PIBs.

In-situ doped and activated N, S co-doped porous carbon derived from organic salt for application in high-performance potassium-ion batteries

Owing to its abundance in nature and low cost, potassium has attracted considerable attention as a substitute for lithium in the manufacture of secondary-ion batteries. However, developing amorphous carbon materials that show fast K+ ion kinetics for application in high-performance potassium-ion battery (PIB) anodes remains challenging. In this study, we designed and synthesized a 3-D hierarchical nitrogen and sulfur co-doped porous carbon electrode via in-situ doping and activation using acesulfame potassium. Owing to its prominent structural advantages, the as-prepared N, S co-doped electrode showed a high reversible capacity (459.8 mAh g−1 at 0.05 A g−1) and long-term cycle stability (205 mAh g−1 after 1000 cycles at 0.5 A g−1). Further, the results of ex-situ Raman spectroscopy and X-ray photoelectron spectroscopy verified the advantages of N and S co-doping with respect to K+ ion intercalation and adsorption/desorption properties within the carbon matrix. Therefore, our findings enhance understanding regarding the advantages of the dual-doped system with respect to K+ ion storage and highlight an efficient strategy for developing high-performance and durable carbon anode materials for PIBs.

2D Se-Rich ZnSe/CoSe2@C Heterostructured Composite as Ultrastable Anodes for Alkaline-Ion Batteries.

2D transitional metal selenide heterostructures are promising electrode materials for potassium-ion batteries (PIBs) owing to the large surface area, high mechanical strength, and short diffusion pathways. However, the cycling performance remains a significant challenge, particularly concerning the electrochemical conversion reaction. Herein, 2D Se-rich ZnSe/CoSe2@C heterostructured composite is fabricated via a convenient hydrothermal approach followed by selenization process, and then applied as high-performance anodes for PIBs. For example, the capacity delivered by the heterostructured composite is mainly contributed to the synergistic effect of conversion and alloy/de-alloy processes aroused by K+, where K+ may highly insert or de-insert into Se-rich ZnSe/CoSe2@C. The obtained electrode delivers an outstanding reversible charge capacity of 214mA h g-1 at 1 A g-1 after 4000 cycles for PIBs, and achieves 262 mAh g-1 when coupled with a PTCDA cathode in the full cell. The electrochemical conversion mechanism of the optimized electrode during cycling is investigated through in situ XRD, Raman, and ex situ HRTEM. In addition, the heterostructured composite as anodes also displays excellent electrochemical performances for sodium-ion batteries (SIBs) and lithium-ion batteries (LIBs). This work opens up a new window for investigating novel electrode materials with excellent capacity and long durability.

Bimetallic Sulfide Hollow Nanocubes Heterostructure Promotes Dual Coupling of Conversion and Alloying/Dealloying Reactions to Achieve Durable Potassium-Ion Battery Anode.

Conversion and alloying-type transitional metal sulfides have attracted significant interests as anodes for Potassium-ion batteries (PIBs) and Sodium-ion batteries (SIBs) due to their high theoretical capacities and low cost. However, the poor conductivity, structural pulverization, and high-volume expansions greatly limit the performance. Herein, Co1-xS/ZnS hollow nanocube-like heterostructure decorated on reduced graphene oxide (Co1-xS/ZnS@rGO) composite is fabricated through convenient hydrothermal and post-heat vulcanization techniques. This unique composite can provide a more stable conductive network and shorten the diffusion length of ions, which exhibits a remarkable initial charge capacity of 638.5mA h g-1 at 0.1 A g-1 for SIBs and 606mA h g-1 at 0.1 A g-1 for PIBs, respectively; It is worth noting that the composite presents remarkable long stable cycle performance in PIBs, which initially delivered 274mA h g-1 and sustained the charge capacity up to 245mA h g-1 at high current density of 1 A g-1 after 2000 cycles. A series of in situ/ex situ detections and first principle calculations further validate the high potassium ions adsorption ability of Co1-xS/ZnS anode materials with high diffusion kinetics. This work will accelerate the fundamental construction of bimetallic sulfide hollow nanocubes heterostructure electrodes for energy storage applications.

Three-dimensional MoS2 nanosheets embeded within NiTe nanorods forming semicoherent heterojunctions achieving high-performance potassium-ion batteries

Three-dimensional MoS2 nanosheets uniformly embedded within NiTe nanorods are synthesized via one-step hydrothermal method and subsequently coated with a carbon layer to form stable NiTe@MoS2@C heterojunctions. The heterojunctions exhibit moderate lattice mismatch (δ =20.0 %), strong electric fields, and uniform carbon shells, resulting in unique electronic configurations and abundant active sites. As an anode for potassium-ion batteries, NiTe@MoS2@C demonstrated an high reversible capacity of 258.4 mAh g−1 after 100 cycles at a rate of 200 mA g−1. Moreover, it showed a stable reversible capacity of 177.5 mAh g−1 at a high rate of 5000 mA g−1, indicating excellent rate performance. Notably, even in the NiTe@MoS2@C//perylene tetracarboxylic dianhydride full battery configuration, a significant reversible capacity of 87.4 mAh g−1 was maintained after 100 cycles at a rate of 200 mA g−1, manifesting its remarkable potential for practical applications in potassium-ion batteries. Theoretical calculations further revealed that the well-designed NiTe@MoS2 heterojunction significantly enhances K+ ion diffusion.

Sulfur-doped pomegranate-like carbon microclusters designed via facile spray-drying process: A novel anode material for potassium-ion batteries

Recent research has demonstrated increasing inclination toward employing hollow carbons featuring nanoscale amorphous structures as anodes in potassium-ion batteries. However, these amorphous structures detrimentally impact the electrode’s electron and ion conductivities, leading to subpar rate performance. Additionally, integrating nanoparticles into electrodes typically yields an uneven distribution, owing to the propensity of nanomaterials to readily aggregate. To address these challenges, S-doped pomegranate-like carbon microclusters (S-PCMs) comprising S-doped primary hollow carbon spheres (HCSs) were synthesized via spray drying. The effects of self-assembly and S doping on the morphological structure and potassium storage performance of the HCS materials were systematically investigated through comprehensive analyses. PCMs mitigated volume expansion and imparted high conductivity and charge/discharge rates owing to short potassium-ion diffusion distances, while the self-assembled nanospheres improved slurry flow properties. Additionally, sulfur doping increased the pore size, interlayer spacing, and number of defect sites in the carbon lattice, improving electron mobility. The resulting S-PCMs exhibited exceptional potassium storage properties, particularly cycling performance (224 mA h g−1 at the 1000th cycle). Furthermore, various electrochemical tests attributed S-PCM’s enhanced potassium storage performance to the numerous active sites and increased resistance to charge transfer, improving the potassium diffusion coefficient.

Ultrahigh nitrogen-doped carbon derived from g-C3N4 assisted by citric acid for superior potassium-ion storage

Nitrogen-doped carbon is regarded as a promising anode for potassium ion batteries (PIBs) because nitrogen atoms can regulate the structures of carbon and generate abundant active sites. How to improve the nitrogen content in carbon through simple and effective methods remains to be further addressed. In this paper, a carbon material (60NC) with ultrahigh nitrogen content (16 %) was prepared from graphite phase carbon nitride (g-C3N4) by a convenient freeze-drying and high-temperature pyrolysis method, assisted by citric acid. When used as an anode for PIBs, 60NC exhibited a superior reversible capacity of 318.1 mAh g−1 after 200 cycles at 0.1 A g−1. Even at the high current density of 1A g−1, 60NC maintained a specific capacity of 261.8 mAh g−1 after 1000 cycles. The excellent electrochemical performance of 60NC mainly stems from its abundant K+ storage active sites caused by nitrogen doping, large layer spacing, and hierarchical porous structure.

Encapsulation of Sn Sub‐nanoclusters in Multichannel Carbon Matrix for High‐Performance Potassium‐ion Batteries

Sub‐nanoclusters with ultra‐small particle sizes are particularly significant to create advanced energy storage materials. Herein, Sn sub‐nanoclusters encapsulated in nitrogen‐doped multichannel carbon matrix (denoted as Sn‐SCs@MCNF) are designed by a facile and controllable route as flexible anode for high‐performance potassium ion batteries (PIBs). The uniformly dispersed Sn sub‐nanoclusters in multichannel carbon matrix can be precisely identified, which ensure us to clarify the size influence on the electrochemical performance. The sub‐nanoscale effect of Sn‐SCs@MCNF restrains electrode pulverization and enhances the K+ diffusion kinetics, leading to the superior cycling stability and rate performance. As freestanding anode in PIBs, Sn‐SCs@MCNF manifests superior K+ storage properties, such as exceptional cycling stability (331 mAh g−1 after 150 cycles at 100 mA g−1) and rate capability. Especially, the Sn‐SCs@MCNF||KFe[Fe(CN)6] full cell demonstrates impressive reversible capacity of 167 mAh g−1 at 0.4 A g−1 even after 200 cycles. Theoretical calculations clarify that the ultrafine Sn sub‐nanoclusters are beneficial for electron transfer and contribute to the lower energy barriers of the intermediates, thereby resulting in promising electrochemical performance. Comprehensive investigation for the intrinsic K+ storage process of Sn‐SCs@MCNF is revealed by in situ analysis. This work provides vital guidance to design sub‐nanoscale functional materials for high‐performance energy‐storage devices.

Encapsulation of Sn Sub-nanoclusters in Multichannel Carbon Matrix for High-Performance Potassium-ion Batteries.

Sub-nanoclusters with ultra-small particle sizes are particularly significant to create advanced energy storage materials. Herein, Sn sub-nanoclusters encapsulated in nitrogen-doped multichannel carbon matrix (denoted as Sn-SCs@MCNF) are designed by a facile and controllable route as flexible anode for high-performance potassium ion batteries (PIBs). The uniformly dispersed Sn sub-nanoclusters in multichannel carbon matrix can be precisely identified, which ensure us to clarify the size influence on the electrochemical performance. The sub-nanoscale effect of Sn-SCs@MCNF restrains electrode pulverization and enhances the K+ diffusion kinetics, leading to the superior cycling stability and rate performance. As freestanding anode in PIBs, Sn-SCs@MCNF manifests superior K+ storage properties, such as exceptional cycling stability (331 mAh g-1 after 150 cycles at 100 mA g-1) and rate capability. Especially, the Sn-SCs@MCNF||KFe[Fe(CN)6] full cell demonstrates impressive reversible capacity of 167 mAh g-1 at 0.4 A g-1 even after 200 cycles. Theoretical calculations clarify that the ultrafine Sn sub-nanoclusters are beneficial for electron transfer and contribute to the lower energy barriers of the intermediates, thereby resulting in promising electrochemical performance. Comprehensive investigation for the intrinsic K+ storage process of Sn-SCs@MCNF is revealed by in situ analysis. This work provides vital guidance to design sub-nanoscale functional materials for high-performance energy-storage devices.

Antimony nanoparticles encapsulated in interconnected nitrogen-doped carbon nanospheres for high performances PIBs

Antimony (Sb) has attracted significant attention as an anode material for potassium-ion batteries (PIBs) due to its high theoretical capacity and suitable working voltage. However, the severe volume variations of Sb during potassiation/depotassiation process lead to sluggish kinetics and poor cyclic stability for PIBs. In this study, Sb nanoparticles are confined within interconnected N-doped carbon nanospheres (Sb@NC) through an effective carbothermal reduction process. The potassium storage performances and mechanism are elucidated through electrochemical tests combined with ex-XRD analysis. When used as an anode for PIBs, the optimized Sb@NC-2 anode exhibits excellent cycle stability of 463.0 mAh g−1 at 200 mA g−1 over 100 cycles and superior rate capability of 113.4 mAh g−1 at a high current density of 2 A g−1. Besides, a full cell comprising an Sb@NC-2 anode and a PTCDA cathode is also tested to validate the practical feasibility of the anode. Furthermore, Density Functional Theory (DFT) calculations demonstrate that N-doped carbon can enhance the adsorption of K+ and improve the kinetics of electrochemical reactions. Therefore, the unique yolk-shell structure in this study effectively restricts volume expansion and aggregation of Sb particles while facilitating rapid electron/ion transfer. These findings provide a potential alternative anode material for advanced PIBs.

Synthesis of nitrogen-doped amorphous carbon nanotubes from novel cobalt-based MOF precursors for improving potassium-ion storage capability

Amorphous carbon materials with sophisticated morphologies, variable carbon layer structures, abundant defects, and tunable porosities are favorable as anodes for potassium-ion batteries (PIBs). Synthesizing amorphous carbon materials typically involves the pyrolysis of carbonaceous precursors. Nonetheless, there is still a lack of studies focused on achieving multifaceted structural optimizations of amorphous carbon through precursor formulation. Herein, nitrogen-doped amorphous carbon nanotubes (NACNTs) are derived from a novel composite precursor of cobalt-based metal–organic framework (CMOF) and graphitic carbon nitride (g-CN). The addition of g-CN in the precursor optimizes the structure of amorphous carbon such as morphology, interlayer spacing, nitrogen doping, and porosity. As a result, NACNTs demonstrate significantly improved electrochemical performance. The specific capacities of NACNTs after cycling at current densities of 100 mA/g and 1000 mA/g increased by 194 % and 230 %, reaching 346.6 mAh/g and 211.8 mAh/g, respectively. Furthermore, the NACNTs anode is matched with an organic cathode for full-cell evaluation. The full-cell attains a high specific capacity of 106 mAh/gcathode at a current density of 100 mA/g, retaining 90.5 % of the specific capacity of the cathode half-cell. This study provides a valuable reference for multifaceted structural optimization of amorphous carbon to improve potassium-ion storage capability.

Liquid-Phase Exfoliation of Arsenic Trisulfide (As2S3) Nanosheets and Their Use as Anodes in Potassium-Ion Batteries.

Here, we demonstrate the production of 2D nanosheets of arsenic disulfide (As2S3) via liquid-phase exfoliation of the naturally occurring mineral, orpiment. The resultant nanosheets had mean lateral dimensions and thicknesses of 400 and 10 nm, and had structures indistinguishable from the bulk. The nanosheets were solution mixed with carbon nanotubes and cast into nanocomposite films for use as anodes in potassium-ion batteries. These anodes exhibited outstanding electrochemical performance, demonstrating an impressive discharge capacity of 619 mAh/g at a current density of 50 mA/g. Even after 1000 cycles at 500 mA/g, the anodes retained an impressive 94% of their capacity. Quantitative analysis of the rate performance yielded a capacity at a very low rate of 838 mAh/g, about two-thirds of the theoretical capacity of As2S3 (1305 mAh/g). However, this analysis also implied As2S3 to have a very small solid-state diffusion coefficient (∼10-17 m2/s), somewhat limiting its potential for high-rate applications.

Coaxial electrospinning synthesis free-standing Sn/TiO2 flexible carbon fibers with sheath/core structure for advanced flexible lithium/potassium-ion batteries

Flexible Sn/TiO2 carbon nanofiber (ST-NCF) composites were constructed by doping TiO2 into tin-based carbon nanofibers via coaxial electrospinning. Sn/TiO2 carbon nanofiber was directly used as an anode for Lithium-ion Batteries (LIBs) and Potassium-ion Batteries (PIBs), which show exceptional electrochemical performances. The layered sheath/core structure of the material lead to its good electrochemical properties, where the core Sn carbon nanofiber was encapsulated by the sheath layer of TiO2 nanoparticles. In addition to enhancing its electrical conductivity, the outer TiO2 and N-doped carbon fiber matrix also provide a buffer zone for volumetric strain during charging and discharging. The fiber core Sn and sheath TiO2 form a heterojunction interface on the two-dimensional tube surface, which increases the diffusion rate of ions and electrons. After 100 cycles, TiO2-NCF and ST-NCF-40%TBT (40% TBT indicates the percentage of TiO2 in shell solution to the total composition of shell spinning solution) show capacities of 386.6 mAh g−1 and 1336 mAh g-1, respectively, at 0.5A g-1. After 2000 cycles, ST-NCF-40%TBT in LIBs displayed a high capacity of 299 mAh g-1 at 10 A g-1. After 350 cycles at 1A g-1, the capacity of ST-NCF-40%TBT in PIBs is reserved at 307 mA h g-1. Due to the superior mechanical flexibility of ST-NCF-40%TBT films, it will be a promising anode candidate for flexible LIBs and PIBs.

Fast and robust potassium storage enabled by controllable hierarchical CoTe2/MoS2@C nanorods with semi-coherent heterogeneous interfaces

Constructing heterostructures in a controllable manner stands as a pivotal strategy for enhancing the potassium-ion storage capabilities of transition metal tellurides. However, the challenge lies in achieving a favorable morphology while simultaneously regulating the heterogeneous interface. This study employs a straightforward one-step hydrothermal method to grow few-layer MoS2 nanosheets on CoTe2 nanorods, thereby fabricating a controllable hierarchical structure with a dense three-dimensional (3D) network of MoS2 nanosheets and abundant semi-coherent heterojunction interfaces with CoTe2. The CoTe2/MoS2 heterostructure exhibits abundant semi-coherent interfaces, at which a built-in electric field is formed that facilitates the migration of electrons and ions. A hierarchical structure of CoTe2/MoS2@C was further formed by carbon coating, that applies a dual constraint on CoTe2 to effectively alleviate its volume expansion during charge and discharge processes. Employed as the anode of potassium-ion batteries, the hierarchical structure of CoTe2/MoS2@C demonstrates a significant improvement in high-rate capacity, achieving a high specific capacity of 144.0 mAh g−1 at 5.0 A g−1. The material also enables excellent long-term cycling stability with a capacity decay of only 0.016 % per cycle up to 1800 cycles at 1.0 A g−1.

Binder-Free Anodes for Potassium-ion Batteries Comprising Antimony Nanoparticles on Carbon Nanotubes Obtained Using Electrophoretic Deposition.

Antimony has a high theoretical capacity and suitable alloying/dealloying potentials to make it a future anode for potassium-ion batteries (PIBs); however, substantial volumetric changes, severe pulverization, and active mass delamination from the Cu foil during potassiation/depotassiation need to be overcome. Herein, we present the use of electrophoretic deposition (EPD) to fabricate binder-free electrodes consisting of Sb nanoparticles (NPs) embedded in interconnected multiwalled carbon nanotubes (MWCNTs). The anode architecture allows volume changes to be accommodated and prevents Sb delamination within the binder-free electrodes. The Sb mass ratio of the Sb/CNT nanocomposites was varied, with the optimized Sb/CNT nanocomposite delivering a high reversible capacity of 341.30 mA h g-1 (∼90% of the initial charge capacity) after 300 cycles at C/5 and 185.69 mA h g-1 after 300 cycles at 1C. Postcycling investigations reveal that the stable performance is due to the unique Sb/CNT nanocomposite structure, which can be retained over extended cycling, protecting Sb NPs from volume changes and retaining the integrity of the electrode. Our findings not only suggest a facile fabrication method for high-performance alloy-based anodes in PIBs but also encourage the development of alloying-based anodes for next-generation PIBs.

Recent advances in Sb-based anodes for Li/Na/K-ion batteries and all-solid-state Li-ion batteries

In recent decades, lithium-ion batteries (LIBs) have emerged as a primary focus in the energy-storage field owing to their superior energy and power densities. However, concerns regarding the depletion of non-abundant lithium resources have prompted the exploration and development of emerging energy-storage technologies, such as sodium- (SIBs) and potassium-ion batteries (PIBs). In addition, all-solid-state LIBs (ASSLIBs) have been developed to address the issues of flammability and explosiveness associated with liquid electrolytes. Among the various alloy-based anodes, antimony (Sb) anodes exhibit high energy densities owing to their high theoretical volumetric capacities that are attributable to their high densities. However, Sb anodes exhibit poor cyclabilities owing to excessive volume changes during cycling. To mitigate this issue, researchers have investigated the use of diverse solutions, including solid electrolyte interface control, structural control, and composite/alloy formation. Herein, we review and summarize Sb-based anode materials for LIBs, SIBs, PIBs, and ASSLIBs developed over the past five years (2018-present), focusing on their reaction mechanisms and multiple approaches used to achieve optimal electrochemical performance. We anticipate that this review will provide a comprehensive database of Sb-based anodes for LIBs, SIBs, PIBs, and ASSLIBs, thereby advancing relevant studies in the energy-storage-systems field.

Construction of High-Performance Anode of Potassium-Ion Batteries by Stripping Covalent Triazine Frameworks with Molten Salt.

Covalent triazine frameworks (CTFs) are promising battery electrodes owing to their designable functional groups, tunable pore sizes, and exceptional stability. However, their practical use is limited because of the difficulty in establishing stable ion adsorption/desorption sites. In this study, a melt-salt-stripping process utilizing molten trichloro iron (FeCl3) is used to delaminate the layer-stacked structure of fluorinated covalent triazine framework (FCTF) and generate iron-based ion storage active sites. This process increases the interlayer spacing and uniformly deposits iron-containing materials, enhancing electron and ion transport. The resultant melt-FeCl3-stripped FCTF (Fe@FCTF) shows excellent performance as a potassium ion battery with a high capacity of 447 mAh g-1 at 0.1 A g-1 and 257 mAh g-1 at 1.6 A g-1 and good cycling stability. Notably, molten-salt stripping is also effective in improving the CTF's Na+ and Li+ storage properties. A stepwise reaction mechanism of K/Na/Li chelation with C═N functional groups is proposed and verified by in situ X-ray diffraction testing (XRD), ex-situ X-ray photoelectron spectroscopy (XPS), and theoretical calculations, illustrating that pyrazines and iron coordination groups play the main roles in reacting with K+/Na+/Li+ cations. These results conclude that the Fe@FCTF is a suitable anode material for potassium-ion batteries (PIBs), sodium-ion batteries (SIBs), and lithium-ion batteries (LIBs).